aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-08build system: Rely on xcompile for HOSTCC and HOSTCXXPatrick Georgi
It already looks for them, so let's use the result instead of blindly defaulting to gcc/g++, except when not building an image (but run kconfig or tests) because we don't use xcompile in those cases. Change-Id: I3e50c70a609f1903a925610928f8779c191040d8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43145 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-08util/xcompile: Look for the host compiler in XGCCPATH, too (and first)Patrick Georgi
If there's a host compiler in XGCCPATH, it's likely the same relatively-current version we use for coreboot, and it's a well-known quantity, so let's prefer that over alternatives by default. In addition, look for the C++ host compiler as well. Change-Id: If50341df169a476899b5a5ffd4c4fb6d21c3f4ac Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43144 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-08sb/intel/i82801gx,ix,jx: Drop invalid GNVS update routineKyösti Mälkki
The smm_setup_structures() calls placed GNVS address into register %ebx. Old code on i82801dx used these low memory addresses. Change-Id: I407b9b9fd44db027a62356e2470f6c39ed3bff49 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42426 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-08ACPI: Add and fill gnvs_ptr for smm_runtimeKyösti Mälkki
Change-Id: I823d04a4851437b4267a60886e5ab205bb2e1b10 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-08mb/ocp/deltalake: Enable LPC IO 0x600 decode for BICBryant Ou
BIC uses LPCflash utility to flash FW, it uses LPC to send the bridge IC image from host to bridge IC, 0x600 ~ 0x6FF is used to send BIC image for in-band update support. TEST=Use LPCflash utility to flash BIC FW on YV3 successfully. [root@localhost lpcflash_101_bin]# ./lpc_update.sh Y3BRDL_D06.bin Update Bridge IC Firmware from LPC Deltalake linux utility ver:1.01 build time: Feb 11 2020 14:30:55 Processing image file: Y3BRDL_D06.bin .. of size 206968 (0x00032878) bytes .. file will be padded to a 64-byte size .. with DEBUG Enabled Generating CRC-32 for file. Done (0x4e3905a3). iBytesRead (0x00007c00). Discovering LPC boot loader. Discovered @ 0x3f8. Configuring LPC boot loader. Configured @ 0x00000600. Sending header block. Sent. Loading firmware into target. Sending 31744 bytes ............................... Sending 31744 bytes ............................... Sending 31744 bytes ............................... Sending 31744 bytes ............................... Sending 31744 bytes ............................... Sending 31744 bytes ............................... Sending 16512 bytes ................. Load complete. Update done! Signed-off-by: Bryant Ou <Bryant.Ou.Q@gmail.com> Change-Id: Ia1ea9b35b154225fdfd8955830e6c42b453a81ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/42856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-07-08mb/google/dedede/var/drawcia: add elan touchscreenWisley Chen
BUG=b:155002684 TEST=build drawcia, and check touchscreen can work Change-Id: Ib6a190d2f6fc5132af0e58c6df9919381e88f699 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-07-08cpu/x86/smm: Add support for long modePatrick Rudolph
Enable long mode in SMM handler. x86_32 isn't affected by this change. As the rsm instruction used to leave SMM doesn't restore MSR registers, drop back to protected mode after running the smi_handler and restore IA32_EFER MSR (which enables long mode support) to previous value. NOTE: This commit does NOT introduce a new security model. It uses the same page tables as the remaining firmware does. This can be a security risk if someone is able to manipulate the page tables stored in ROM at runtime. USE FOR TESTING ONLY! Tested on Qemu Q35. Change-Id: I8bba4af4688c723fc079ae905dac95f57ea956f8 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35681 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-08Documentation: Add TODOs for secure SMM when using x86_64Patrick Rudolph
Change-Id: I157238f18bc1c2eba0adc0b87caa9adaf3fc5d38 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-07-08nb/intel/haswell/acpi: Update to ASL 2.0 syntaxAngel Pons
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: Ibcc54c2332945fff28d6502edb7eefa06f764bdd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43152 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-08nb/intel/haswell/acpi: Fix host bridge registersAngel Pons
The host bridge register definitions haven't changed from Sandy Bridge to Haswell, according to the datasheets. However, coreboot's ACPI code is not the same. Looks like Haswell values are wrong, so correct them. Change-Id: Ib099575b5cc5e7d468db51f382a15b8aac3eedea Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43151 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-08libpayload: arm64: silence libpayload main entryMichael Walle
No other architecture in libpayload outputs anything in the main entry routine. Let alone an exception test which looks like a real exception to the normal user and is most likely really misleading. Silence the startup code. Change-Id: I6e49f24ad46ce578a4bb111c2d623ca4470a1866 Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43126 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-08libpayload: arm64: fix OUTPUT_ARCH()Michael Walle
There is no bfd "arm64". The correct bfdname is "aarch64". Fix it. With this change libpayload will build with the AArch64 GCC. Change-Id: If7a6b14691107c5d4fc67c3cd3990ecc849d4af1 Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-07-08mb/ocp/deltalake: Configure IPMI FRB2 watchdog timer via VPD variables in ↵Johnny Lin
romstage Add VPD variables for enabling/disabling FRB2 watchdog timer and setting the timer countdown value. By default it would start the timer and trigger hard reset when it's expired. The timer is expected to be stopped later by payload or OS. Tested on OCP Delta Lake. Change-Id: I3ce3bdc24a41d27eb1877655b3148ba02f7f5497 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-07-08mb/ocp/deltalake: Update IIO PCIe bifurcation according to different configsJohnny Lin
In romstage get the config from BMC IPMI and update the IIO accordingly. Tested on OCP Delta Lake with FSP WW24 release, with lspci checking bifurcation register values are expected. Change-Id: I412336c32d093fe2bbdc7175f8e596923c77876f Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2020-07-08mb/google/dedede/var/drawcia: Support Elan touchpadWisley Chen
BUG=b:155002811 TEST=build drawcia, and check touchpad can work. Change-Id: I674236aa6937a0444a85e6b8e2fb9a7925b56f5c Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42922 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07google/trogdor: Add new variant PompomJulius Werner
This patch adds a new variant called Pompom that is identical to Lazor for now. Also reorder variants alphabetically while we're here. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I5a0f297413765bce8353d5a781f0f67446de4e7c Reviewed-on: https://review.coreboot.org/c/coreboot/+/43147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philip Chen <philipchen@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-07-07vendorcode/intel/fsp/fsp2_0/cpx_sp: Update to FSP ww26 release and adapt socJonathan Zhang
CPX-SP FSP ww26 release added UPDs to allow FSP serial redirection. Also update memory map HOB definition file accordingly. The CPX-SP soc code is updated to direct FSP log to SOL. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: Ifd86fb710a0b2bdc8a43225b50b24f585d320caf Reviewed-on: https://review.coreboot.org/c/coreboot/+/42840 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07armv7: mmu: Use 'tlbimva' to invalidate TLB entriesSam Lewis
The tlbimvaa operation (invalidate unified TLB by MVA, all address space identifiers) is only available on armv7 processors that support Multiprocessing Extensions. When used on processors that do not support the extensions it causes an "undefined instruction" exception. This patch changes the MMU table entry filling code to use the tlbimva (invalidate unified TLB entry by MVA and address space identifier) operation for invalidating TLB entries, which is supported on all armv7 processors. As address space identifiers are not used in TLB entries in coreboot (all entries are set as global), these two operations can safely be used interchangeably. The ASID value supplied to the operation is not checked for global TLB entries. More information as well as the data formats for the tlbimvaa and tlbimva operations are detailed in the "ARM Architecture Reference Manual ARMv7-A" edition, issue "C.c" page B4-1747. TEST: Booted Beaglebone Black (my current in progress port) Change-Id: Ie7dfb4adab20dc7eecb1b20aa2ee6355215a1521 Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43137 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-07-07ec/google: Add function ec_fill_dptf_helpers()Tim Wawrzynczak
ec_fill_dptf_helpers() is used to generate all of the "helper" methods that DPTF requires. A system with a Chrome EC is typically in charge of fan PWM control as well as battery charging, so if DPTF needs to manipulate those, then it requires Methods provided by the EC. BUG=b:143539650 TEST=compiles Change-Id: Ib30072d1d0748b31bcab240a0fd0e2f12d34aaa4 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41894 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07acpigen: Add acpigen_notifyTim Wawrzynczak
A fairly common thing in ACPI is notifying a device when some kind of device-specific event happens; this function simplifies writing this pattern. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I0f18db9cc836ec9249604452f03ed9b4c6478827 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42102 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07soc/intel/common/block: Add new block DTTTim Wawrzynczak
Intel Dynamic Tuning Technology is the name of a PCI device on some Intel SoCs. This minimal PCI driver is only used now for SSDT generation on TGL devices. Change-Id: Ib52f35e4e020ca3e6ab8b32cc3bf7df36041926e Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41893 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07mb/lenovo/t60: Fix override devicetreesNico Huber
When converting to override trees in commit c1dc2d5e68 (mb/lenovo/t60: Switch to override tree), some device nodes were missed. These are essential, as `chip` configuration data is always tied to device nodes. The resulting `static.c` contained multiple copies of the `chip` configuration structs, but the wrong ones were hooked up. The therefore missing configuration of the clock gen led to general instability, especially with SMP under Linux (probably due to the attempt to enter lower C states on an idle core). Passing `maxcpus=1` to the Linux kernel served as a workaround. Change-Id: I6c26d633d1860cf9a5415994444e75ae1c2e59ad Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43150 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07soc/intel/tigerlake: Disable Thunderbolt PCIe root ports bus masterJohn Zhao
This change disables Thunderbolt PCIe root ports bus master before handing over to payload in order to mitigate the threat from the unauthorized external DMA. In this state, the PCIe root ports would be considered as trusted to not forward any DMA transactions to downstream endpoint devices. BUG=b:141609884 TEST=Verified PCIe resource has been allocated properly and USB behind Thunderbolt dock is enumerated successfully. Change-Id: I9650b9dd4df1f9bee53ae3737b7bf60b2ef8017b Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40968 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-07-07src/include: improve the description of hexstrtobinAnna Karas
Specify how hexstrtobin.c processes the strings of odd length. Signed-off-by: Anna Karas <aka@semihalf.com> Change-Id: Ie8cd8fb93d7dab08c5e7f28fc511b6381f5ad13a Reviewed-on: https://review.coreboot.org/c/coreboot/+/43089 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07tests: Add lib/hexstrtobin-test test caseAnna Karas
Implement unit tests for lib/hexstrtobin module. Signed-off-by: Anna Karas <aka@semihalf.com> Change-Id: Id929b07936ea180a798309e5acb1dacf1b396e32 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-07-07mb/google/vilboz: Drop gpio.c from variants/vilbozPeichao Wang
Update GPIOs since Vilboz hardware design follow schematic V3.2, so gpio.c is unnecessary. BUG=b:157744136 BRANCH=NONE TEST=flash the bios to vilboz DUT and test touchpad function Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I575f8b233b56185f3281ad7127bc274bda5ea801 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42986 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07mb/google/vilboz: Fix variant ID for v3+ schematics for vilbozPeichao Wang
At this moment, Vilboz board version is 1 and it according to v3+ schematics, however WiFi power enable is active high. This change sets VARIANT_MIN_BOARD_ID_V3_SCHEMATICS for Vilboz as 1 and VARIANT_MIN_BOARD_ID_WIFI_POWER_ACTIVE_LOW as 2. BUG=b:160547115 BRANCH=None TEST=flash the bios to vilboz DUT and test WIFI module Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I9699bb839a801ab7d14c38b971ec28e3a322a997 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-07mb/intel/tglrvp: Add PMC.MUX.CONx devices to devicetree for tglrvp_up3John Zhao
Two usb Type-C ports under the actual mux device. Each port has its own ACPI device entry. These nodes are the ones that the USB Type-C port/connector device will refer to in order to configure the mux. TEST=Verified the scope of PMC.MUX CONx in the SSDT on Tigerlake RVP board. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I7210e00cebe16a5fb8417ac23abad98e574e0982 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42953 Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07mb/google/volteer: Change ov2740 HID of Chrome driver to match withDaniel Kang
Windows definition There was a review comment for Chromium Linux ov2740 driver that Windows driver already set the HID as INT3474 and suggested to have the same value for Chrome. The upstreamed Linux driver code has INT3474 as HID and this patch is to set the same HID in ACPI configuration. https://patchwork.kernel.org/patch/11540753/ BUG=b:160334865 BRANCH=none TEST=User-facing camera should work with the driver which set the HID as INT3474 Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Change-Id: I10e98d32899f31d91c1cc7ddfa099af73d8aef37 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43006 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Daniel H Kang <daniel.h.kang@intel.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07mb/google/volteer: Fix world-facing camera LED is always on issueDaniel Kang
Volteer world-facing camera has a privacy LED and it is supposed to be turned on only when the camera is being used. But the LED is always on and this is to fix the issue. RCAM_SNR_PWR_EN (RearCAMera_SeNsoR_PoWeR_ENable) GPIO, which controls the world-facing camera LED, was not in the power-up and power-down sequence definitions and this caused the issue. BUG=b:160341981 BRANCH=none TEST=Build and boot volteer proto 2 board. Start a camera app and check the world-facing camera LED is only turned on only when the camera is working. Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Change-Id: I564690baffddfdd0f998525992643aaf16ba4b02 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42985 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Daniel H Kang <daniel.h.kang@intel.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07dptf: Add support for IDSPTim Wawrzynczak
\_SB.DPTF.IDSP adverties to the DPTF daemon which policies the implementation supports. Added a new acpigen function to figure out which policies are used, and fills out IDSP appropriately. Change-Id: Idf67a23bf38de4481c02f98ffb27afb8ca2d1b7b Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42081 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-07-07dptf: Add support for Fan and TSR optionsTim Wawrzynczak
DPTF has several options on how to control the fan (fine-grained speed control, minimum speed change in percentage points, and whether or not the DPTF device should notify the Fan if it detects low speed). Individual TSRs can also set GTSH, which is the amount of hysteresis inherent in the measurement, either from circuitry (if analog), or in firmware (if digital). BUG=b:143539650 TEST=compiles Change-Id: I42d789d877da28c163e394d7de5fb1ff339264eb Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-07-07dptf: Add support for Running Average Power LimitsTim Wawrzynczak
This change adds support for emitting the PPCC table, which describes the ranges available as knobs for DPTF to tune. It can support min/max power, min/max time window for averaging, and the minimum adjustment size (granularity or step size) of each power limit. The current implementation only supports PL1 and PL2. BUG=b:143539650 TEST=compiles Change-Id: I67e80d661ea5bb79980ef285eca40c9a4b0f1849 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-07-07dptf: Add support for Fan Performance StatesTim Wawrzynczak
This change adds support for generating the _FPS table for the DPTF Fan object. The table describes different levels of fan activity that may be applied to the system in order to actively cool it. The information includes fan speed at a (rough) percentage level, fan speed in RPM, potential noise level in centibels, and power in mA. BUG=b:143539650 TEST=compiles Change-Id: I5591eb527f496d0c4c613352d2a87625d47d9273 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41889 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-07-07dptf: Add support for Charger Performance StatesTim Wawrzynczak
This change generates the DPTF TCHG.PPSS table in the SSDT. This table describes different charging rates which are available to use. DPTF can pick different rates in order to passively cool (or not) the system. BUG=b:143539650 TEST=compiles Change-Id: I6df6bfbac628fa4e4d313e38b8e6c53fce70a7f2 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-07-07dptf: Add support for Critical PoliciesTim Wawrzynczak
This patch adds support for DPTF Critical Policies, which are consist of Method definitions only. They are `_CRT` and `_HOT`, which are defined as temperature thresholds that, when exceeded, will execute a graceful suspend or a graceful shutdown, respectively. BUG=b:143539650 TEST=compiles Change-Id: I711ecdcf17ae8f6e653f33069201da4515ace85e Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41887 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-07-07dptf: Add support for Passive PoliciesTim Wawrzynczak
This patch adds support for emitting the Thermal Relationship Table, as well as _PSV Methods, which together form the basis for DPTF Passive Policies. BUG=b:143539650 TEST=compiles Change-Id: I82e1c9022999b0a2a733aa6cd9c98a850e6f5408 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-07-07dptf: Add support for generation of Active PoliciesTim Wawrzynczak
This change adds support for generating the different pieces of DPTF Active Policies. This includes the Active Relationship Table, in addition to _ACx methods. BUG=b:143539650 TEST=compiles Change-Id: Iea0ccbd96f88d0f3a8f2c77a7d0f3a284e5ee463 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41885 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-07-07drivers/intel/dptf: Add current participant Devices to DSDTTim Wawrzynczak
In this DPTF implementation, the participant device objects are written into the DSDT with only minimal Names attached (_HID/_ADR, _STA, _UID, PTYP, and _STR). All other Methods & Names will be written into the SSDT. If a device is not used in any policy, then its _STA is set to return 0 ("off"). BUG=b:143539650 TEST=Compiles. Change-Id: Ief69a57adce9ee0b19056ce6a11ed8a5b51b3f87 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-07-07soc/intel/{tiger,jasper}lake: Add IPU to soc_acpi_nameTim Wawrzynczak
For both Tiger Lake and Jasper Lake, add the DEVFN for Image Processing Unit (IPU) to soc_acpi_name, which is set to return "IPU0". Change-Id: Ib11be5be7fbaec688d8788945a3bcab3f8d834a1 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42878 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07soc/intel/common: Add a minimal PCI driver for IPUTim Wawrzynczak
Add a minimal PCI driver for Intel's IPU, this allows devices to be added underneath it in the devicetree. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I531b293634a5d40112dc6af7b33fedb5e13f35e5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42812 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07pci_ids: Add TGL & JSL IPU PCI IDsTim Wawrzynczak
Add PCI IDs for Intel's Image Processing Unit (IPU) for TGL & JSL Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I71dc95a6692e82ca25b0252b4f0789ee059df89f Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42811 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07util/crossgcc: Always bootstrap for gcc < 4.9Patrick Georgi
Building cbfstool requires at least 4.9 due to optimizer bugs in gcc 3.x to 4.8.x, so let's not work around ancient compilers in our tree but ensure that users get a newer compiler. Closes: https://ticket.coreboot.org/issues/240 Change-Id: I4e0f80e2790514e6a1b5d5de1a373f365df1569c Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43143 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07drivers/intel/mipi_camera: Add camera power resource to SSDTSugnan Prabhu S
This change adds support function to parse entries in the devicetree to generate PowerResource entries for the MIPI camera. Change-Id: I31e198b50acf2c64035aff9cb054fbe3602dd83e Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41624 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07acpi: add STA function to return external variableSugnan Prabhu S
This change adds support function to add STA function which returns an external variable. Change-Id: I31755a76ee985ee6059289ae194537d531270761 Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42245 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07drivers/intel/mipi_camera: Add support to handle CIO2 deviceMatt Delco
This change updates mipi_camera driver to handle CIO2 device type. Change-Id: I521740524bc1c4da3d8593f011a033542e4a872c Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42470 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07drivers/intel/mipi_camera: SSDT changes to add PLDMatt Delco
This change updates mipi_camera driver to add PLD section to SSDT. Change-Id: If65b9cbabca95e9645d8e5023ce7fd78b0625d1e Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42469 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07drivers/intel/mipi_camera: SSDT changes to add DSMMatt Delco
This change updates mipi_camera driver to add DSM section to SSDT. Change-Id: Ic60e972b6aebad171a7b77fe0d99781693adfb20 Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42468 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07drivers/intel/mipi_camera: Add support for camera sensor in SSDTMatt Delco
This change updates mipi_camera driver to handle camera sensor. Change-Id: I581c9bf9b87eac69e88ec11724c3b26ee5fa9431 Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42467 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07drivers/intel/mipi_camera: Handle NVM and VCM device typeMatt Delco
This change adds support in mipi_camera driver to handle NVM and VCM device types. Change-Id: I24cb7f010d89bc8d14e0b4c8fe693ba6e9c68941 Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42466 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07drivers/intel/mipi_camera: Handle acpi_name and common codeMatt Delco
This change updates the mipi_camera driver to handle acpi_name based on device_type, if acpi_name is not set in the devicetree and moves some of the common code to separate methods. Change-Id: I15979f345fb823df2560db269e902a1ea650b69e Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41607 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07util/inteltool: Support dumping more BARs on Skylake mobile SoCsBenjamin Doron
Support dumping MCHBAR, EPBAR, DMIBAR and PCIEXBAR on SKL-U/Y. These chipsets are similar to others supported by the tool. Working on SKL-U. Change-Id: Ic43d54ef189d500701872a56e67781a744990328 Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-07mb/google/zork: update telemetry settings for dalbozChris Wang
update telemetry value for SDLE test result. BUG=b:152922299,b:152369472 TEST=emerge-zork coreboot Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I14d218243931271ba15ec4113e9bc46c670fb2ca Reviewed-on: https://review.coreboot.org/c/coreboot/+/42999 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07mb/google/volteer/var/terrador: Update gpio settings and overridetree.cbDavid Wu
Based on schematic and gpio table of terrador, generate gpio settings and overridetree.cb for terrador. BUG=b:156435028,b:151978872 TEST=FW_NAME=terrador emerge-volteer coreboot chromeos-bootimage Verify that the image-terrador.bin is generated successfully. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I4bf9081b034bc4cd566dde45586be8309cdbb4a3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42302 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07mb/google/volteer/var/terrador: Add memory parts and generate DRAM IDsDavid Wu
This change adds memory parts used by variant terrador to mem_list_variant.txt and generates DRAM IDs allocated to these parts. Added memory 1. MT53E512M64D4NW-046 WT:E 2. MT53E1G64D8NW-046 WT:E BUG=b:159195585,b:152936481,b:156435028 TEST="emerge-volteer coreboot chromeos-bootimage", flash terrador and verify terrador boots to kernel. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ia14f76e9cb0df64961d46f4b61b39439e56f6a8c Reviewed-on: https://review.coreboot.org/c/coreboot/+/41995 Reviewed-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-07lp4x: Add new memory parts and generate SPDsDavid Wu
This change adds the following memory parts to LP4x global list and generates SPDs using gen_spd.go for TGL: 1. MT53E512M64D4NW-046 WT:E 2. MT53E1G64D8NW-046 WT:E BUG=b:159195585,b:152936481,b:156435028 TEST=build. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: If69087e5e189b3e0f70e5f1afbfe3f884173d3b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-07-06trogdor: Add board variant checks in KconfigRavi Kumar Bokka
Diffentiate Lazor and trogdor build configuration Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: I3ad413ea6e658e939796bebdff8c1e0dd76417cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/42730 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-06tests: Add lib/b64_decode-test test caseAnna Karas
Implement unit tests for lib/b64_decode module. Signed-off-by: Anna Karas <aka@semihalf.com> Change-Id: Id5fe9272e30eaff3d086a95241b3819101089c2b Reviewed-on: https://review.coreboot.org/c/coreboot/+/42313 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-06tests: Complete lib/string-test test caseAnna Karas
Implement unit tests for remaining string library functions. Fix memory leak in test_strdup(). Signed-off-by: Anna Karas <aka@semihalf.com> Change-Id: I8ac6a6b2413d9077dc9ea81f638a2b0acd5c8862 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42311 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-06sb/intel/i82801jx/sata.c: Handle ABAR as a resourceAngel Pons
Instead of directly reading ABAR without any checking, do like i82801ix and treat it as a resource. This prevents problems if ABAR is not set. Change-Id: I4f888b748204860b0a7e1bf5611f5f3e487e8081 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42643 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-07-06src/**/acpi/smbus.asl: Drop dead codeAngel Pons
The `ENABLE_SMBUS_METHODS` symbol is not defined anywhere, so this code isn't even being tested. So, throw it into the bitbucket before it rots any further. If anyone needs that code ever again, it's in git history. Change-Id: I22e3f1ad54e81f811c9660d54f3765f3c6b83f01 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43024 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-06mb/google/volteer: Enable HotPlug on PCIe root port for the SD expressnick_xr_chen
Enable HotPlug for the PCIe root port that the SD express is on so the OS can re-train the link without needing a reboot if it goes down unexpectedly at runtime. BUG=b:156879564 BRANCH=master TEST=enable HotPlug on Volteer Root Port 7 (SD express) and check in linux that it is identified as a HotPlug capable root port Signed-off-by: Nick Chen <nick_xr_chen@wistron.corp-partner.google.com> Change-Id: Ie9d427dd297567f06123119a670b5ed2e1f73701 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42897 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-06soc/intel: Drop unused `#include <reg_script.h>`Angel Pons
In some cases, the SoC did not even select `REG_SCRIPT` in Kconfig. Change-Id: I617f332b80c534997e06a91247d1be90a85573be Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43138 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-07-06pgtblgen: Update comment to match what the code doesPatrick Rudolph
Change-Id: Ib87c804b139a96a4173a6f392f0f99a77d32fc01 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-07-06devicetree: Remove weak declarations for opsKyösti Mälkki
Make it compulsory to build with all the drivers that are visible in the board devicetree.cb file. Change-Id: Ifb783e2f733d5c65c615e5c1879e3e4c7a83e049 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-07-06mb/amd/mandolin: Drop SPD eeproms in devicetreeKyösti Mälkki
Even with previous platforms, these entries were not utilised for raminit. Change-Id: I9a9a1a292bad8c4c89cbacb826c80f4098cae00f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43046 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-07-06prog_loaders: Fix ramstage loading on x86Nico Huber
A regression sneaked in with 18a8ba41cc (arch/x86: Remove RELOCATABLE_ RAMSTAGE). We want to call load_relocatable_ramstage() on x86, and cbfs_prog_stage_load() on other architectures. But with the current code the latter is also called on x86 if the former succeeded. Fix that and also balance the if structure to make it more obvious. TEST=qemu-system-x86_64 boots to payload again. Change-Id: I5b1db5aac772b9b3a388a1a8ae490fa627334320 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43142 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-06mb/google/volteer: Rename remaining pmc_mux/con to connPatrick Georgi
CB:43090 renamed con to conn to avoid issues when building on Windows. CB:42905 introduced more uses of the old name. Adapt the latter to comply with the former. Change-Id: I723141add5452fc541f67cb8591793f2d64cc231 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43141 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-06mb/asus/p8z77-m_pro: Remove PS/2 keyboard & mouse duplicateKeith Hui
PS/2 keyboard and mouse devices are declared twice in the DSDT, once in mainboard and once in southbridge. It would appear in Windows Device Manager as two PS/2 keyboards and two PS/2 mouses, all with resource conflicts. This change drops the declaration from mainboard. The issue was discovered when this setup was copied for p8z77-m and being boot tested. Change-Id: I746a960aaf3992acbcb6a7364641fc4fd12002d2 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41225 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-06drivers/ipmi: Increase BMC waiting message level from DEBUG to INFOPaul Menzel
As the booting the system can be delayed for a noticeable amount of time, often 60 seconds is the default, this is not a debug message. Chose log level BIOS_INFO. Change-Id: I941792148820c0e1d3fbc80197125fee8cedf09f Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-06nb/intel/i440bx: Add PMCR register to ACPI codeKeith Hui
p3b-f suspend code is going to use it. Change-Id: Iebc17257e9f690115ec35d94c7c36df39341f0df Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41092 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-06nb/intel/i440bx: Refactor ACPI codeKeith Hui
Bring DRB7 OpRegion and top-of-memory indicator inside NB device. Use more concise ASL 2.0 syntax for TOM calculations. Change-Id: I2c74ef30a9bb48e02154f963b1ca3a4f5f3004df Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-07-06sb/intel/i82371eb: Don't fill \_SB.PCI0.MBRSKeith Hui
Only two mainboard groups use this southbridge: emulation/qemu-i440fx: Nothing creates or consumes this ACPI path. asus/p2b: It only fills the (mostly static) PIIX4E PM/SMBus I/O resources, which are being declared in DSDT. It is not doing anything useful and causes ACPI errors in Linux kernel[1][2], so it has to stop. [1] https://review.coreboot.org/c/coreboot/+/38601 [2] https://review.coreboot.org/c/coreboot/+/38304 Change-Id: I770047610e02c08191613b57c989b3bc1d464684 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-07-06mb/intel/dg43gt: Don't redefine MMCONF_BASE_ADDRESSArthur Heymans
Change-Id: I4d62a04778c8f634b48eee459808f640451b9b48 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35871 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-07-06arch/x86: Remove RELOCATABLE_RAMSTAGEKyösti Mälkki
We always have it, no need to support opting-out. For PLATFORM_HAS_DRAM_CLEAR there is a dependency of ramstage located inside CBMEM, which is only true with ARCH_X86. Change-Id: I5cbf4063c69571db92de2d321c14d30c272e8098 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43014 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-06mb/google/volteer/var/voxel: Update gpio settings and overridetree.cbDavid Wu
Based on schematic and gpio table of voxel, generate gpio settings and overridetree.cb for voxel. BUG=b:157879197,b:155062762 TEST=FW_NAME=voxel emerge-volteer coreboot chromeos-bootimage Verify that the image-voxel.bin is generated successfully. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I49c1923e63d87f11de362fd893905ac2f1137bba Reviewed-on: https://review.coreboot.org/c/coreboot/+/42731 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-07-06libpayload: cbgfx: Fix add_fractions() overflow reductionJulius Werner
log2(1) is 0 and log2(0) is -1. If we have the int64_t 0xffffffff then log2(0xffffffff >> 31) = log2(0x1) = 0, so the current reduction code would not shift. That's a bad idea, though, since 0xffffffff when interpreted as an int32_t would become a negative number. We need to always shift one more than the current code does to get a safe reduction. This also means we can get rid of another compare/branch since -1 is the smallest result log2() can return, so the shift can no longer go negative now. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ib1eb6364c35c26924804261c02171139cdbd1034 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Joel Kitching <kitching@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-07-06mb/google/zork: Apply cereme telemetry settings for dalbozChris Wang
Currently, the telemetry settings are not for the pollock platform and might causethe power and performance issue. so applied the Pollock reference board settings to Dalboz to improve the performance, and the values need to be updated after the SDLE test finished. BUG=b:157961590,b:152922299 TEST=Build. Change-Id: I0da5b81afaa5814c13ec0257dc0eb3471be94c29 Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2228257 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42998 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-06mb/google/zork: Apply USB2 default phy tune parameter for Zork familyChris Wang
Apply the default USB2 phy tuning parameter for Zork family BUG=b:155132211 TEST=Build, verified the default value been applied on trembyle and the USB2 device works well. Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I1f00b04173796d70147e232bafa405487b0761e1 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2260216 Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42997 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-06mb/google/zork: Add USB2 phy tuning parameter for SI tuningChris Wang
Add the USB2 phy tuning parameter to adjust the USB 2.0 PHY driving strength. BUG=b:156315391 TEST=Build, verified the tuning value been applied on Trembyle. Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I3d31792d26729e0acb044282c5300886663dde51 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2208524 Reviewed-by: Raul E Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com> Tested-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-06mb/google/volteer: Add support for passive USB-C daughterboardCaveh Jalali
The USB-C SBU and HSL orientation configuration depends on the USB daughterboard used on the system. This patch adds an additional configuration for supporting passive USB daughterboards using "probe" directives to select the appropriate configuration at runtime. BUG=b:158673460 TEST=verified active USB DBs enumerate at USB3 speeds in linux Signed-off-by: Caveh Jalali <caveh@chromium.org> Change-Id: Ia4bd97de8f974531f97469a5e47ecf4d948beca9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42905 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-07-06mb/google/dedede: Create Boten Legacy variantKarthikeyan Ramasubramanian
Upcoming builds of boten will use 16 MiB SPI ROM. So create a legacy Boten variant to support the builds that use 32 MiB SPI ROM. BUG=None TEST=Build the boten and boten_legacy variant. Cq-Depend: TBD Change-Id: Idf7732768aa7fbf2281a4cbf47b7b5b4f8ef51da Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-07-06mb/google/dedede: Create Drawcia Legacy variantKarthikeyan Ramasubramanian
Upcoming builds of drawcia will use 16 MiB SPI ROM. So create a legacy Drawcia variant to support the builds that use 32 MiB SPI ROM. BUG=None TEST=Build the drawcia and drawcia_legacy variant. Cq-Depend: TBD Change-Id: Ifb5a4778abe38a396e35963a3270b0d3cc9809e0 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-07-06soc/amd/common: Fix missing gpio_banks.h includeKyösti Mälkki
Change-Id: I2c92280f3bbd80bd7a0d3abfb2fddcef997e144e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42943 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-06soc/amd/picasso/memlayout: Verify bootblock is 16-bit alignedRaul E Rangel
The bootblock must be 16-bit aligned for it to boot. BUG=b:159081993 TEST=Made sure trembyle still compiles. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I29c244a3f08df46c5992fe81683b9c0d740ff248 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42885 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-06soc/intel/jasperlake: set SerialIoUartDebugMode to skip Uart InitMaulik V Vaghela
Since coreboot is initializing uart for debug logs, fsp should not reinitialize it. Thus we need to set FSP UPD to skip Uart init in FSP and use settings done by coreboot BUG=None BRANCH=None TEST=FSP is able to push debug logs on UART with this setting Cq-Depend: TBD Change-Id: I0fda2ace3b1f63159e9809d6a3044a3bad452f07 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42462 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2020-07-06vendorcode/intel/fsp: Add Jasper Lake FSP headers for FSP v2194Ronak Kanabar
The FSP-M/S headers added are generated as per FSP v2194. BUG=b:159193895 BRANCH=None TEST=Build and boot JSLRVP Cq-Depend: TBD Change-Id: I0cd84fdb0089bf8ea3f4440e89fdee7f11119751 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42471 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-06soc/amd/picasso: Use PSP Sx command only for S3Marshall Dawson
Skip sending MboxBiosCmdSxInfo for sleep states other than S3. The PSP only acts on S3 and ignores all others. As a result, the command register is not cleared upon return and coreboot reports a timeout. BUG=b:153622879 TEST=Use halt from command line, verify command skipped. Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: Ic47b8507e29e4c53898e88fb46e532b71df87d07 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43038 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-05arch/x86: Support x86_64 exceptionsPaul Menzel
* Doesn't affect existing x86_32 code. Tested on qemu using division by zero. Tested on Lenovo T410 with additional x86_64 patches. Change-Id: Idd12c90a95cc2989eb9b2a718740a84222193f48 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30117 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-07-05mb/google/zork: Drop check for ENV_RAMSTAGE in mainboard_ec_initFurquan Shaikh
This change drops the check for ENV_RAMSTAGE in mainboard_ec_init() since it is included only in ramstage. Also, the content of ramstage_ec_init() is moved into mainboard_ec_init(). Change-Id: I282fb07a80f4de6064a544f6dd58e8f973a597b9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43118 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-05mb/google/zork: Drop mainboard_ec_init() from romstageFurquan Shaikh
mainboard_ec_init() does nothing in any stage other than ramstage. So, this change drops the call to mainboard_ec_init() from romstage.c. Additionally, it also drops ec.c from romstage and verstage. Change-Id: Iae0be4d678b0780cf532000a6c0fff1bce333c0e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43117 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-05mb/google/zork: Drop unused function variant_romstage_entry()Furquan Shaikh
This change drops the function `variant_romstage_entry()` which is unused on zork. Change-Id: I140ab3e837971c4c7dbef5d27616043b5fc6c2c9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43116 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-05ec/google/chromeec: Drop codec.aslFurquan Shaikh
This change drops codec.asl file from Chrome EC since it is now unused. Change-Id: I6c2f3e53b14aaf76b9c6d038a732e79a4d7bb2f1 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43043 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-05mb/google/zork: Use SSDT generator for Chrome EC audio codec deviceFurquan Shaikh
This change drops the inclusion of codec.asl in DSDT for `GOOG0013` device and instead uses the newly added Chrome EC audio codec driver for filling in the device node in SSDT. TEST=Verified that following node gets generated: Scope (\_SB.PCI0.LPCB.EC0.CREC) { Device (ECA0) { Name (_HID, "GOOG0013") // _HID: Hardware ID Name (_UID, One) // _UID: Unique ID Name (_DDN, "Cros EC audio codec") // _DDN: DOS Device Name Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } } } Change-Id: I3e626ce01a3735ac2c966c0e95310be4c828b241 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43042 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-05ec/google/chromeec: Add driver for audio codec deviceFurquan Shaikh
This change adds driver for audio codec device (HID `GOOG0013`) living behind Chrome EC. This driver generates the required ACPI node for the codec device. In a later change, GOOG0013 device will be dropped the .asl file. Change-Id: Ib2759eac60265ef81df70af1d4f1f72bd9d987e8 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43041 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-05ec/google/chromeec: Move if EC_GOOGLE_CHROMEEC to i2c_tunnel/KconfigFurquan Shaikh
This change moves `if EC_GOOGLE_CHROMEEC` from chromeec/Kconfig to chromeec/i2c_tunnel/Kconfig. This is done to make it clear that the Kconfig file in i2c_tunnel is sourced unconditionally, but the configs in i2c_tunnel/Kconfig are conditionally defined based on the evaluation of if condition. This change addressed the feedback received on https://review.coreboot.org/c/coreboot/+/40515/11/src/ec/google/chromeec/Kconfig#200. Change-Id: I66cd91d6b1813ff6d0fb7be719e2da65ac6ac23b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43040 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-05mb/google/kahlee: Drop macro H1_PCH_INTFurquan Shaikh
This change drops H1_PCH_INT macro for GPIO_9 since it is the same across all variants. Also, the name differed from the schematics version `H1_PCH_INT_ODL` creating confusion. Change-Id: I7b038426a984d8abc460a0da3ee1dc5559d7ad5f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2020-07-05arch/x86/Makefile.inc: Drop unused reset.c ruleAngel Pons
No x86 mainboard has a reset.c file. Change-Id: I167629c7addf485944926d57cf0228606c0f32e5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42582 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-05mb/supermicro/x9scl: Select IPMI_KCSAngel Pons
Needed for `chip drivers/ipmi` in the devicetree. Change-Id: Ice70aab7cedaeb91a33dd90d763c5a487f190b8f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41687 Reviewed-by: Michael Niewöhner Reviewed-by: Jonathan Kollasch <jakllsch@kollasch.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-05drivers/pc80/tpm: Remove support code if TPM is disabledKyösti Mälkki
Change-Id: I7015d4bf6f536c5cea8e1174db81f09f756ae0e5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41873 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Michael Niewöhner
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-08 21:00:39 +0000