summaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2014-05-13chrome ec: Fix temperature calcualtion in PATx methodsDuncan Laurie
2014-05-13chrome ec: call DPTF thermal threshold event handlerAaron Durbin
2014-05-13baytrail: Updates for DPTF ACPI frameworkDuncan Laurie
2014-05-13chrome ec: Update header and add functions to support DPTFDuncan Laurie
2014-05-13rambi: Update the DPTF configurationDuncan Laurie
2014-05-13baytrail: don't SMI on tco timer firingAaron Durbin
2014-05-13baytrail: clear the pmc wake status registersAaron Durbin
2014-05-13baytrail: log reset, power, and wake events in elogAaron Durbin
2014-05-13baytrail: snapshot power state in romstageAaron Durbin
2014-05-13baytrail: add cpuid for C0Aaron Durbin
2014-05-13rambi: Move KBD_IRQ pin for Rambi 2.0 boardShawn Nematbakhsh
2014-05-13src/*: Remove the last remnants of struct keyboardEdward O'Callaghan
2014-05-13superio/*: Remove redundant chip.h headerEdward O'Callaghan
2014-05-13superio/*: Deal with some chip.h special casesEdward O'Callaghan
2014-05-13src/drivers/pc80: Remove empty struct keyboardEdward O'Callaghan
2014-05-13southbridge/amd/sb?00/lpc.c: Move i8254/i8259 down in southbridgeEdward O'Callaghan
2014-05-12Rambi: Enable 32k SUSCLK signalKyösti Mälkki
2014-05-12rambi: Make eMMC CLK pull-down and change pull strengths to 20KShawn Nematbakhsh
2014-05-12baytrail: align with intel recommendationsAaron Durbin
2014-05-12rambi: specify reference code index in vboot areaAaron Durbin
2014-05-12baytrail: add way to load reference code from vboot areaAaron Durbin
2014-05-12baytrail: Expose IOSF as ACPI objectDuncan Laurie
2014-05-12rambi: Disable HSUART2 and SPI interfacesDuncan Laurie
2014-05-12rambi: Enable SCC devices in ACPI modeDuncan Laurie
2014-05-12baytrail: Put devices in ACPI mode after setupDuncan Laurie
2014-05-12baytrail: Add header include wrapper and offset defineDuncan Laurie
2014-05-12superio/ite/it8718f: Remove hard coding from romstageEdward O'Callaghan
2014-05-11superio/ite/*: Factor out generic romstage componentEdward O'Callaghan
2014-05-11superio/ite/it8728f: RAMstage PNP configuration componentEdward O'Callaghan
2014-05-11SeaBIOS: Fix cpp usePatrick Georgi
2014-05-10Arch-level Kconfig menu cleanupFurquan Shaikh
2014-05-10Replace SERIAL_CPU_INIT with PARALLEL_CPU_INITKyösti Mälkki
2014-05-10mainboard/jetway/nf81-t56n-lf: Toggle WDT and CIR in devicetree.cbEdward O'Callaghan
2014-05-10superio/fintek/f71869ad: Fix incorrect LDN'sEdward O'Callaghan
2014-05-10baytrail: cache reference code for S3 resumeAaron Durbin
2014-05-10baytrail: allow ramstage_cache_location() usage in ramstageAaron Durbin
2014-05-10ramstage_cache: allow ramstage usage add valid helperAaron Durbin
2014-05-10baytrail: note S3 resume status earlierAaron Durbin
2014-05-10baytrail: utilize reg_script_run_on_dev()Aaron Durbin
2014-05-10baytrail: initialize perf/power registersAaron Durbin
2014-05-10baytrail: add more iosf access functionsAaron Durbin
2014-05-10baytrail: remove verbosity in iosfAaron Durbin
2014-05-10reg_script: add reg_script_run_on_dev()Aaron Durbin
2014-05-10baytrail: Add support for LPSS and SCC devices in ACPI modeDuncan Laurie
2014-05-09Makefile: Don't use llvm-mc for the momentEdward O'Callaghan
2014-05-09Makefile.inc: Make clang once again a valid toolchainEdward O'Callaghan
2014-05-09payloads: make build system integration work againPatrick Georgi
2014-05-09cougar_canyon2: Switch CPU/NB/SB to the shared FSP codeMartin Roth
2014-05-09Intel FSP: add a shared set of functions for the FSPMartin Roth
2014-05-09superio/serverengines/pilot: Avoid .c includesEdward O'Callaghan
2014-05-09Squelch some warnings from KconfigKyösti Mälkki
2014-05-09cbfstool: account for the trampoline code in bzImage payloadAaron Durbin
2014-05-09payloads/coreinfo/README: Use `It is` instead of `Its`Paul Menzel
2014-05-09rambi: Enable DPTFDuncan Laurie
2014-05-09baytrail: Basic DPTF frameworkDuncan Laurie
2014-05-09rambi: Set panel power timingsDuncan Laurie
2014-05-09baytrail: Enable panel and set timingsDuncan Laurie
2014-05-09rambi: change SD card pulls to 20KAaron Durbin
2014-05-09rambi: limit SD card controller to 2.0 specAaron Durbin
2014-05-09baytrail: allow SD card controller capabilities overridesAaron Durbin
2014-05-09baytrail: fix nvs offsetsAaron Durbin
2014-05-09rambi: export SPI write-protect GPIO correctlyAaron Durbin
2014-05-09baytrail: lpe audio device needs memory for its firmwareAaron Durbin
2014-05-09toolchain: get rid of some bashismsAaron Durbin
2014-05-08ChromeOS boards: Always build code for bootmode strapsKyösti Mälkki
2014-05-08ChromeOS boards: Fix includesKyösti Mälkki
2014-05-08Declare get_write_protect_state() without ChromeOSKyösti Mälkki
2014-05-08Rename from save_chromeos_gpios() to init_bootmode_straps()Kyösti Mälkki
2014-05-08ChromeOS boards: Use explicit include of chromeos.cKyösti Mälkki
2014-05-08superio/fintek/f71869ad: Make hwm devicetree configurableEdward O'Callaghan
2014-05-08superio/fintek/f71869ad: Configure multi-func reg in devicetreeEdward O'Callaghan
2014-05-08mainboard/jetway/nf81-t56n-lf: Improve diags in romstageEdward O'Callaghan
2014-05-08rambi: Make ec_in_rw a legacy GPIOShawn Nematbakhsh
2014-05-08baytrail: gpio: Make GPIO inputs MMIO by defaultShawn Nematbakhsh
2014-05-08rambi: Change eMMC pin PUs to 2KShawn Nematbakhsh
2014-05-08rambi: configure SD card signalsAaron Durbin
2014-05-08baytrail: enable lpe resources assigned to deviceAaron Durbin
2014-05-08baytrail: Fix _CRS to build with new IASLDuncan Laurie
2014-05-08rambi: configure the LPE audio codec clockAaron Durbin
2014-05-08baytrail: add lpe codec clock configurationAaron Durbin
2014-05-08baytrail: Add ACPI code to describe GPIO controllerDuncan Laurie
2014-05-08baytrail: Update to microcode 31E and fix C-state tableDuncan Laurie
2014-05-07baytrail: minor stylePatrick Georgi
2014-05-07rambi: Remove outdated commentPatrick Georgi
2014-05-07rambi: handle single channel configsAaron Durbin
2014-05-07baytrail: romstage: Add config option to enable RMTShawn Nematbakhsh
2014-05-07baytrail: pcie: Root port initializationAaron Durbin
2014-05-07baytrail: gpio: Fix NCORE gpio-to-pad LUTShawn Nematbakhsh
2014-05-07rambi: use SERIRQ pad as keyboard irq in gpio modeAaron Durbin
2014-05-07rambi: make ramids non-legacy gpio inputsAaron Durbin
2014-05-07baytrail: enable caching and prefetching in spi controllerAaron Durbin
2014-05-07baytrail: fix direct irq pad configurationAaron Durbin
2014-05-07baytrail: ensure init_chromeos() is called in romstageAaron Durbin
2014-05-07rambi: distribute IRQs away from PIRQA on pci devicesAaron Durbin
2014-05-07superio/common/conf_mode: Provide another common pnp entry/exitEdward O'Callaghan
2014-05-07kconfig: update to follow upstream more closelyPatrick Georgi
2014-05-07baytrail: don't allow PCIE wake upsAaron Durbin
2014-05-07baytrail: gpio: Make pad input/output state mutually exclusiveShawn Nematbakhsh
2014-05-07rambi: fixup settings so trackpad can be found in kernelAaron Durbin
2014-05-07baytrail: first pass at lpss device initializationAaron Durbin
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 14:52:18 +0000