summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-01-24mainboard/lenovo/s230u/smihandler.c: Use __func__Elyes HAOUAS
Change-Id: If46ef5ffbd3de82d793a095b011e5740b776ff14 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mainboard/intel/strago/ec.c: Use __func__Elyes HAOUAS
Change-Id: Ifa30e9d2a71eae9a438e84367fd8b4f8bd920983 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49555 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mainboard/intel/emeraldlake2/ec.c: Use __func__Elyes HAOUAS
Change-Id: I75f534245d37f401357b611efc5c190e8a872d02 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49554 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24ec/acpi/ec.c: Use __func__Elyes HAOUAS
Change-Id: I4823b84d851d7d1f0f48be44ab28e7365b553b6f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24drivers/intel/gma/opregion.c: Use __func__Elyes HAOUAS
Change-Id: Ia45825ade0c9d24d5b87882e21bfc6df82a693e6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24drivers/elog/elog.c: Use __func__Elyes HAOUAS
Change-Id: I024a0c2d7c53634c58d5d80522933ecad554d7c9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24device/pci_rom.c: Use __func__Elyes HAOUAS
Change-Id: I24c40d511eeaa5073acd2b47b20b4ec2f85bb69e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mb/lenovo/t400: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I4e6d5048ca9e949a70f3619f05b74870c1f1fe30 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24mb/lenovo/s230u: Convert to ASL 2.0 syntaxElyes HAOUAS
Generated 'build/dsdt.dsl' are identical. Change-Id: I8843d418bd9c34a4f079444bc6ce8ecd4559e36d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24ec/purism/librem/acpi/ec.asl: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: Ic773f8404c24fc886e8420a5f4b3e00b2d752ba2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24soc/samsung/exynos5250/dp-reg.c: Use __func__Elyes HAOUAS
Change-Id: I572ee7faaa4453d32852eea2b83b0b27c549abf2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-01-24arch/x86: Use wildcard for mb/smihandler.cKyösti Mälkki
Change-Id: I306f8cd74af62c0cd30f445d20c47f774f122481 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49247 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24ACPI: Clean up GNVS initialisationKyösti Mälkki
With the common <soc/nvs.h> approach platform does not need to implement the common accessors or sizeof() function. Change-Id: I1050a252f765c763c1ae2d1610cbfb0d973ba026 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-24soc/amd/cezanne/Kconfig: select missing SSE2 optionFelix Held
This will set the corresponding enable bit in CR4 in bootblock_crt0.S Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I648a83fbcb71456bf1e5b11c491e7cadc8e0e281 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-01-24soc/amd/cezanne/Kconfig: select X86_AMD_FIXED_MTRRSFelix Held
This option will make the ramstage MTRR core set the additional bits in the fixed MTRRs that need to be set on AMD CPUs to enable caching. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I94bca61acfc6e38a6d808eb5020537b4e8596178 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-01-24soc/amd/cezanne: add basic romstageFelix Held
This currently only initializes the console, calls into the FSP driver that then calls into FSP-M and then jumps to ramstage after the FSP-M returns. Right now, this mainly unblocks the FSP-M development. Change-Id: I9f3cdaac573e365bb4d59364d44727677f53e91b Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-01-24soc,vendorcode/amd/cezanne: add basic FSP integrationFelix Held
This is a trimmed-down version of the Cezanne FSP integration code, so for example the UPD definitions are empty, which will be addressed later. Since coreboot just leaves the UPD values at their default, this is not a problem during the initial platform bring-up. Change-Id: Ie0fc30120c2455aa2160708251e9d2f229984305 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49445 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-01-24soc/amd/picasso: Remove some empty stringsZheng Bao
Change-Id: If1ff88010f8bf941ec6a76019c4b6a4cb9b31093 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49815 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-01-24soc/amd/cezanne: Add PSP integration for cezanneZheng Bao
Change-Id: Ifa69f03b4c7b871a9f018f40930d2382d2154403 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48528 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24soc/intel/xeon_sp/cpx: Account for 'rc' heap managerArthur Heymans
The xeon_sp/cpx has a second 'rc' heap inside FSP-M that is statically allocated at the start of CAR. This breaks FSP 2.0 specification. This can be worked around in the linker scripts to make sure coreboot and FSP-M don't fight over the same memory. Tested - on ocp/deltalake: boot and the "Smashed stack detected in romstage!" message at the end of romstage is gone. - qemu/i440fx: BUILD_TIMELESS=1 results in the same binary. Change-Id: I6d02b8a46a2a8ef00f34d8f257595d43f5d3d590 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49085 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2021-01-24arch/x86/car.ld: Account for FSP-T reserved areaArthur Heymans
Tested - on ocp/deltalake: boots (with FSP-T). - qemu/i440fx: BUILD_TIMELESS=1 results in the same binary. Change-Id: I7e364ab039b65766eb95538db6b3507bbfbfb487 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49084 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-24soc/intel/lpc_lib: drop dead codeMichael Niewöhner
Change-Id: I7cf5f97c3229fe6a72d70a36e8cff49ff3cf611b Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-24soc/intel/icl: drop wrong, unused codeMichael Niewöhner
The ids used in function `soc_get_pch_series()` are not valid for Icelake. Since it's not even used, instead of fixing it, drop it. Change-Id: I4a1ee4b84f11ea314cb666ce4506ff90168da0ca Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49875 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24soc/intel/cnl: use Kconfig to determine PCH typeMichael Niewöhner
We already know the PCH type at build time, so there is no need to do runtime detection. Thus, use Kconfig and drop `get_pch_series()`. Change-Id: I470871af5f5954e91a8135fddf4a2297a514d740 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49874 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24soc/intel/broadwell: Align raminit with HaswellAngel Pons
Rename and split functions to match what Haswell does. Change-Id: I4f3e997dd934bdf7717a70603d9413eae93cf181 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24soc/intel/broadwell: Drop `struct romstage_params`Angel Pons
It is no longer necessary. Change-Id: Ib37c9de83badc6339dca6916aec8c34a43797652 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24broadwell: Flatten `mainboard_pre_raminit`Angel Pons
All Broadwell boards only use the `mainboard_pre_raminit` function to call `mainboard_fill_pei_data` and optionally `mainboard_fill_spd_data`. Move the declaration and weak definition of `mainboard_fill_spd_data` to platform code, replace the call to `mainboard_pre_raminit` in romstage.c with calls to `mainboard_fill_pei_data` and `mainboard_fill_spd_data`, and delete all other instances of `mainboard_pre_raminit` for Broadwell. Finally, delete now-empty romstage.c and spd.h files from mainboards. Change-Id: I3334b20bd7138bb753b996a137ff106e87c6e8a5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49776 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24broadwell: Clean up `mainboard_post_raminit`Angel Pons
Make it optional and change its signature. Change-Id: I4b5f3fb08e8954514ebf39e72c95aa62d66856d7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24soc/intel/broadwell/chip.h: Drop unused fieldsAngel Pons
Broadwell boards now use the CPU code for Haswell. Therefore, these devicetree options are no longer used anywhere and can be removed. Change-Id: Ib0d1b6eecc11a70d1a2614669353a8040c860535 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24soc/intel/broadwell: Select CPU_INTEL_HASWELLAngel Pons
This allows us to drop many now-redundant Kconfig options. Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. The default configuration file also remains identical, as expected. Change-Id: I20b0200550508679bf2533342ce918b221dcf81e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-24soc/intel/broadwell: Move romstage.c to HaswellAngel Pons
Broadwell no longer has CPU code. Change-Id: I9c9717439a702dddaa613a30e6f3da29887ec4bd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46951 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24soc/intel/broadwell: Drop now-unused CPU codeAngel Pons
All boards now use Haswell's CPU code, which also supports Broadwell. Change-Id: Ia0b8f7bf64334dd965baad0a30a7bb0ed81c4cac Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46950 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24soc/intel/broadwell: Use Haswell CPU headersAngel Pons
Now that the boards use Haswell's CPU code, Broadwell can be updated. Change-Id: If07e5272f07edb59bb18eef1f80d7d5807b26e66 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46949 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24mb/google/auron: Use Haswell CPU codeAngel Pons
The VR config and S0ix options are now specified for the CPU chip. Change-Id: I75e405d41b4a0605e786fe761c92535e62d0cfce Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46945 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24mb/google/jecht: Use Haswell CPU codeAngel Pons
Change-Id: I6c106b152bb2824e000232d23c2991898b2c4475 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46946 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24mb/intel/wtm2: Use Haswell CPU codeAngel Pons
Change-Id: I478576afa3b390cf5480298aafe6e049b5e90bff Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46947 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24mb/purism/librem_bdw: Use Haswell CPU codeAngel Pons
Change-Id: I736bff90305952d279a10dfe90a2ee3a533220b5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46948 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24soc/intel/broadwell: Allow to use Haswell CPU code insteadAngel Pons
This allows individual boards to be adapted to use Haswell CPU code. Also rename the CPU_SPECIFIC_OPTIONS symbol to avoid any collisions. Change-Id: I65e878dacf0a0d53fd8d4defce6684f4ceb92588 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46944 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24soc/intel/broadwell: Select INTEL_LYNXPOINT_LPAngel Pons
This allows the correct Haswell and Lynxpoint code to be used. Change-Id: Icbfc5bb11b1ea755a143fa340a3971376f4e5e91 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46958 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24cpu/intel/haswell: Add Broadwell CPUIDs and microcodeAngel Pons
Broadwell can now use the Haswell CPU driver. Change-Id: I36138cab72b1e3ad0ff7f6434996f5ce00de9d0d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46942 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24cpu/intel/haswell: Set C9/C10 vccminAngel Pons
Backport commit ab7586fa26 (broadwell: Set C9/C10 vccmin) to Haswell. Change-Id: I9cddc7dd45e96c6f99327ee2583917bf8bedfbdd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46922 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24cpu/intel/haswell: Add fast ramp voltage for BroadwellAngel Pons
Backport commit 55228ba4b4 (broadwell: Changes from 2.2.0 ref code) to Haswell, to eventually migrate Broadwell to use the same Haswell code. Change-Id: I03d9ff16bcaab9091bd723ce933aa3f2d71e29b9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46921 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24lib/edid_fill_fb: Relax bits_per_pixel constraintRaul E Rangel
The Picasso VBIOS is not setting the reserved_mask_size correctly. This change relaxes the constraint to allow bpp_mask <= bits_per_pixel. This is how the code previously used to work before CB:39002. BUG=b:177094598, b:177422379 TEST=boot zork and see depthcharge working Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I2e67532fa949fbd673269d8d7f1c0d8af6124ac9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-01-23soc/intel/baytrail,broadwell: Use bootstate for save_wake_source()Kyösti Mälkki
Change-Id: I01be1b9dfefcfcf037de4153e9540c7258dc160f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49818 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-23ACPI: Add helpers for CBMEM_ID_POWER_STATEKyösti Mälkki
Create uniform logging for the (unlikely) case of a CBMEM entry disappearing. Change-Id: I7c5414a03d869423c8ae5192a990fde5f9582f2d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-23soc/amd: Rename chipset_state to chipset_power_stateKyösti Mälkki
To implement some common helpers for CBMEM_ID_POWER_STATE allocation use the same struct name as soc/intel. Change-Id: I5d2c06a2a7b4602374562197c99b0ad7bcf50afb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-23ACPI S3: Replace stashed acpi_slp_typ valueKyösti Mälkki
We currently have a mixture of calls used to determine global ACPI S3 state. Reduce the boilerplate, ultimately acpi_wakeup_is_s3() should be the only to keep. Change-Id: Iff950d2bcf7eacbbdd40865abf62c35a2e8c3c69 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47694 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-23intel/baytrail,braswell,broadwell: Add const qualifier for power_stateKyösti Mälkki
Change-Id: I37781c1423b49130ffd0d5f9fbdd28a36c9c6179 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49821 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-23ELOG: Add const qualifier for chipset_power_stateKyösti Mälkki
It is never allowed for ELOG to modify the state. Change-Id: Ie24df3969a3744f27b23997471666e2490e24b84 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49820 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-23soc/amd/picasso/pcie_gpp: Remove duplication in pirq_data declarationRaul E Rangel
There is no reason to duplicate the table. BUG=b:170595019 BRANCH=zork TEST=boot zork with pci=nomsi and verify /proc/interrupts didn't change Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ief714266cdb1b4f89afd0d9e50238200b87687ef Reviewed-on: https://review.coreboot.org/c/coreboot/+/49367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-01-23soc/amd/picasso/pci_gpp: Replace the swizzle string with a u8 arrayRaul E Rangel
I think it makes the code a bit cleaner. BUG=b:170595019 BRANCH=zork TEST=boot zork with pci=nomsi and verify /proc/interrupts didn't change Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib5e8e5b690d9612e8ae257f5d15c25122e1c91e6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-01-23soc/amd/picasso/pcie_gpp: Add clarifying commentRaul E Rangel
Each bridge can only have one device. BUG=b:170595019 BRANCH=zork TEST=none Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I7e476221dfcabc841cc1ed4bc4b1175c0652dcfe Reviewed-on: https://review.coreboot.org/c/coreboot/+/49841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-01-23mb/google/guybrush: Set FWM position to an upper addressZheng Bao
Setting other places causes build error. BUG=b:178241112 TEST=Build Change-Id: I85d5d44c458feed38d69f21f899d6b4380963ec7 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49825 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-01-23soc/amd/picasso/acpi: Remove dummy AOAC parent deviceRaul E Rangel
The dummy AOAC parent device was nice because it grouped all the AOAC devices. Unfortunately windows doesn't like this dummy device and causes "Not Found" errors. This change moves the AOAC devices to the actual devices that use them. BUG=b:175146875 TEST=Boot linux and make sure power resources are enabled/disabled. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Idd4a94baa4358ee4f15c461a5bb54ca925023a13 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-23soc/intel/cometlake: Add ucode for CML-HTim Crawford
Add microcode from 3rdparty repo for: - 06-a5-02 (CPUID signature: 0xa0652) Change-Id: I95419f44a1e804ce31338fe6d863f156c655321b Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47915 Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-233rdparty/intel-microcode: Update submodule to 20201118 releaseTim Crawford
Update submodule pointer to include microcode for CML-H and others. Change-Id: Ide211b0b163f824a3cfa6500a73aea1e2176c652 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47914 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-23mb/google/auron: Drop `variant_romstage_entry`Angel Pons
Replace it with `mainboard_post_raminit`. Change-Id: I94636c775cee6c14317ecff36972e2d267d28c91 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-23mb/google/auron: Factor out SPD indexingAngel Pons
The code to read the SPD file and index it is not variant-specific. Change-Id: Iaee0a77934a45c65bf32dd0dba23cec654abc0b9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-23mb/google/auron: Factor out `mainboard_print_spd_info`Angel Pons
It is identical for all variants that have it. Change-Id: Iec3a5f036d9b760d1075059f2db1480b1c76273e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-23mb/google/auron: Merge two print statementsAngel Pons
They are part of the same line, so merge them. Change-Id: I969ce91f7a5f16a85750c140eaa444d7923b2014 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-23mb/google/auron: Drop `spd.h` from variantsAngel Pons
Factor out common DRAM SPD definitions and relocate SPD GPIO macros. Also factor out common function definition. Drop now-empty headers. Change-Id: Id05ba6c9cea27fbad5ee831f033d0de43717847e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-23mb/intel/coffeelake_rvp: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: Ib827e9b2919dbd0e16f30b8dfde46348365d9622 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-23soc/intel/apl: drop LPC pad configuration codeMichael Niewöhner
Drop LPC pad configuration code since all boards now do pad configuration on their own. The comment about LPC_CLKRUNB when using eSPI is moved to `Documentation/getting_started/gpio.md`. Change-Id: I710d6aee8c3b2c8282cd321cd0688b9b26abea07 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49410 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-23drivers/intel/fsp2_0: Add meaningful ERROR messageSubrata Banik
Add the "ERROR:" tag so that it ease debug effect. TEST=Test tools like "suspend_stress_test" (specific to Chrome OS) can identify the obvious coreboot ERROR prior running S3 resume test. Change-Id: I64717ce0412d43697f42ea2122b932037d28dd48 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49798 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22vendorcode/google/chromeos: Build CSE Board Reset in RomstageKarthikeyan Ramasubramanian
CSE Firmware Sync is being performed in romstage currently. But the CSE board reset is not included as part of romstage. This causes the CSE firmware sync to use global reset instead of EC assisted AP reset with the old Cr50 Firmware version. Include the board specific CSE reset in romstage. BUG=b:171731175,b:177795247 BRANCH=dedede,volteer,puff TEST=Ensured that the Drawlat boots to OS with both old(0.0.22) and new(0.6.7) Cr50 FW versions. Change-Id: I5e362271ffb68ffd5884279acd1ab0a462195a8a Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49850 Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22util/docker: Replace all variables in DockerfileMartin Roth
When updating the variables in the dockerfile, if there were two or more variables on a line, only the first would be updated. This fixes that issue. Change-Id: I011ccb299c7c8527b79d234075cab18be998ab43 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-22soc/amd/cezanne: add pci_devs.hFelix Held
Change-Id: I9e3ee4c98a85068dc87ef96aaf65a09c6df1572d Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-22mb/amd/majolica: Add PSP support for board majolicaZheng Bao
Change-Id: Ia2470a7297c7003c7975c7d9b977f2f97174efea Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48529 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22mb/google/guybrush: Set the ROMSIZE as 16MZheng Bao
Change-Id: Iec8b40bd89c25cd2193aff8af45d0a09b07ad6a3 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49797 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22ec/google/chromeec: Provide EC access for Retimer firmware updateJohn Zhao
Kernel needs to access EC RFWU entry in order to retrieve from EC about port and mux info and set EC operations like modes change. This change provides EC RFWU path and update for Retimer driver usage. BUG=b:162528867 TEST=Booted to kernel and verified EC RFWU path from ACPI SSDT table. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I3817d93cfdeedf15825dab6c537b151fd063338b Reviewed-on: https://review.coreboot.org/c/coreboot/+/49257 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22ec/google/chromeec: Add RFWU into EC RAM for Retimer firmware updateJohn Zhao
The RFWU byte is defined as Bits[3:0] for port number and Bits[7:4] for operations. The supported operations are: RETIMER_FW_UPDATE_PORT_INFO 0 RETIMER_FW_UPDATE_PD_SUSPEND 1 RETIMER_FW_UPDATE_PD_RESUME 2 RETIMER_FW_UPDATE_GET_MUX 3 RETIMER_FW_UPDATE_SET_USB 4 RETIMER_FW_UPDATE_SET_SAFE 5 RETIMER_FW_UPDATE_SET_TBT 6 RETIMER_FW_UPDATE_DISCONNECT 7 BUG=b:162528867 TEST=Booted to kernel and verified RFWU entry from ACPI DSDT ERAM field. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I1ba04c6357b6fd0cc33ffce33e7e430539bace79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49051 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22drivers/intel/usb4: Enable retimer FW upgrade mux interactionBrandon Breitenstein
In order to update the BB retimers for usb4/tbt they need to be turned on and into TBT mode. Expand the current DSM to allow for the use of an EC RAM byte RFWU to get the current state of each port and whether or not it has a retimer. It also allows Kernel to issue state transitions for the retimer to be put into TBT mode for firmware update. BUG=b:162528867 TEST=Along with work in progress kernel and EC patches, the Retimer firmware update is verified under device attached and no device attached scenarios. Change-Id: I768cfb56790049c231173b0ea0f8e08fe6b64b93 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48630 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-22sconfig: Handle smbios_slot_desc in overridetreeFrans Hendriks
SMBIOS slot information in overrridetree is not overriden if device already exist in devicetree. Add support to handle this information from override. BUG= N/A TEST= Verify generated static.c on Intel Coffee Lake CRB Change-Id: I532436aee1d71b79171463124f7b205c145d5b05 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49738 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22mb/prodrive/hermes: Fix 30 second boot delayPatrick Rudolph
The PMC doesn't response any more due to invalid CNVi GPIO configuration. This caused a 30 second boot delay in FSP-S. Use the same values as FSP-S does. Always disable external I2S BT audio and use NF3 for pad GPP_D5 and GPP_D6. Tested on Prodrive hermes: No boot delay can be observed any more. Change-Id: I6f4a954786ec21512b0dce908d333952e96de048 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49678 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22mb/google/octopus: Garfour override VBT selectionTony Huang
Disable DRRS in VBT to solve panel flick issue SKU ID 49/51 will use vbt_garfour.bin 50/52 will use vbt_garfour_hdmi.bin BUG=b:177783330 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage check /run/debug/i915_drrs_status shows DRRS supported NO. Cq-Depend: chrome-internal:3534569 Change-Id: I5ebb66ec043a6b409dd5abbc31da417f50dbad5c Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49635 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22mb/google/nightfury: Update RAM IDs usageSeunghwan Kim
Add support LP_16G_2133 SPD for nightfury. BUG=None BRANCH=firmware-hatch-12672.B TEST=emerge-hatch coreboot Change-Id: I3709431d8ecb600e25909f456eb0c95db3a3cde2 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49735 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-22types.h: Add a helper macro BITS_PER_BYTEFurquan Shaikh
This change adds a helper macro `BITS_PER_BYTE` so that it doesn't have to be defined in multiple places. Change-Id: Idc344047a5660791eaeb1ce8012910c11f6010ba Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49736 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-22soc/intel/alderlake: Adding Kconfig for ADL_M PCHVarshit Pandya
1. Add SOC_INTEL_ALDERLAKE_PCH_M option in Kconfig 2. Select number of I/O based on PCH Signed-off-by: Varshit Pandya <varshit.b.pandya@intel.com> Change-Id: I38783595e4b85abf5b3bec234ba01667bd9ba754 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49630 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22soc/intel/commmon: Include Alder Lake device IDsVarshit Pandya
Add Alder Lake M specific CPU, System AGent, PCH (Alder Point aka ADP), IGD device IDs. Document Number: 619501, 626817 Signed-off-by: Varshit Pandya <varshit.b.pandya@intel.com> Change-Id: Ib13fe229f9e65eae8967aa20e28e29ac5c319265 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49629 Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22mb/google/volteer/var/elemi: Update dptf parametersWisley Chen
Update DPTF setting from thermal team. BUG=b:177635236 BRANCH=volteer TEST=emerge-volteer coreboot chromeos-bootimage, and verified by thermal team. Change-Id: I87256b5c210ef12c09ef6dd948d80f406ae0500b Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-01-22soc/mediatek/mt8192: pmic: Set efuses manuallyHsin-Hsiung Wang
Some efuse settings would not be applied automatically, so we need set the settings manually. The low power consumption would not be optimal without correct efuse settings. BUG=b:172636735 BRANCH=none TEST=see 'pmic_efuse_setting: Set efuses in 11 msecs' Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Change-Id: Ideb862c3cb0f1fee183804aed74fcf141bf1f5df Reviewed-on: https://review.coreboot.org/c/coreboot/+/49006 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-01-22mb/google/volteer/variants/eldrid: Configure USB2 port for Type-CNick Chen
1. USB2 ports 3 and 8 assigned to Type-C connector 2. USB2 port 3 keep USB2_PORT_SHORT setting and add .type_c flag BUG=b:177481076 TEST=tested on eldrid Signed-off-by: Nick Chen <nick_xr_chen@wistron.corp-partner.google.com> Change-Id: I42a39318a151bdf1f5aeb84bb1992be128cb4a4d Reviewed-on: https://review.coreboot.org/c/coreboot/+/49452 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-22soc/mediatek/mt8183: Fix pq module size configYu-Ping Wu
For pq module size registers such as DISP_AAL_SIZE, the high bits should be HSIZE, while low bits should be VSIZE. Fix the incorrect settings for these registers where width and height are reversed. According to MediaTek, there is no practical impact on mt8183 devices, but it's still nice to get this fixed to avoid future confusion. BUG=b:171167210 TEST=none BRANCH=kukui Change-Id: I4b6aedf9a3ca133fcbe9cb88b99a13d228233e24 Signed-off-by: Yu-Ping Wu <yupingso@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46626 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22mb/emulation/qemu-q35: Account for TSEGArthur Heymans
TSEG is located below TOLUD. The size is configured in ESMRAMC but can also be configured with "-global mch.extended-tseg-mbytes=5" command line argument. Note that the size in ESMRAMC needs to be 'invalid' (3) for this to take action. coreboot will leave TSEG at the default 1MiB. Note that even if TSEG does not end up being used, it is likely a good idea to not put anything there as if SMM gets locked down by something else it will suddenly be inaccessible. Change-Id: I5fd82a42d6602f1369bb3c69556c46f537542705 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-22cpu/intel/haswell: Enable timed MWAIT if supportedAngel Pons
Broadwell code unconditionally enables timed MWAIT, but not all Haswell steppings support it. In preparation for merging Haswell and Broadwell, also enable timed MWAIT on Haswell code, but only if it is supported. Change-Id: I1d11d62f1801d65ae4d5623994fd55fd35e8f34a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46916 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22soc/amd/common/block/smbus: always return SMBus MMIO in get_sm_mmioFelix Held
The old code was broken and register 0x90 didn't even exist any more in the config space of the SMBus PCI device, so just always return the MMIO base address of the SMBus controller. As far as I've seen, no board in tree uses this functionality at the moment. Change-Id: Ib80d5c928da6022427afb8ccc969fb2aac953c2d Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reported-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49121 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-22mb/getac/p470/acpi: Convert 'battery.asl' to ASL 2.0 syntaxElyes HAOUAS
IASL optimizes the code differently, which changes the binary. However, the generated `build/dsdt.dsl` remains identical. Change-Id: Ifcc8bf4022838056bf1fff853eb2027af684064e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45554 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22soc/intel/baytrail,broadwell: Refactor acpi_wake_source()Kyösti Mälkki
Change-Id: I5c277a4b8536fd79bda040d4ada9b0c454399b09 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49356 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22mb/google/kukui: Enable MT8183_DRAM_EMCP for katsuSunway
The katsu project will be using eMCP board design. BUG=b:176271935 TEST=Boots on chromebook katsu successfully. BRANCH=kukui Signed-off-by: Sunway <lisunwei@huaqin.corp-partner.google.com> Change-Id: I733a9a79e2ea6501e26bf79bfce2b1934a295342 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48893 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-22Makefile.inc: Avoid --emit-relocs on RISC-VJulius Werner
There seems to be a bug[1] in the GNU linker for the RISC-V architecture triggered by symbols that are more than 2GB offset from the program counter. My next patch is introducing symbols like that and stuck on this problem. The code path that runs into the issue is only taken when passing the --emit-relocs flag, which is really only needed for building rmodules. Since RISC-V platforms don't use any rmodules at the moment, let's disable the flag on RISC-V until the issue can be fixed in the toolchain. [1]: https://sourceware.org/bugzilla/show_bug.cgi?id=27180 Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I784a506034325c0ba937589416acaafbf80080e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49449 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21soc/amd/cezanne: include LAPIC code and set MAX_CPUS to 16Felix Held
Change-Id: I97c73324900a0677165afa3f5b182a336d534968 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49730 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2021-01-21mb/siemens/chili: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to a bootblock gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Change-Id: Iad40b6315a29e7aea612a3e1a169372d296d1d6c Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49443 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/up/squared: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I357099f797be178543a9e6637335cd0a68633071 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49441 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/kblrvp: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I8b30eb5d70c34ae3e2ed24ab52dd1357a54c5ae7 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49439 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/minnow3: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I0b956427a9cec56d06b03f7f05138f75137b4ea3 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49437 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/leafhill: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: Ibc727302109456eb1d86652c947ce85b3a64c5b2 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49436 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/glkrvp: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I80369ab70d5510cb4f388f3029119e7148361af4 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49435 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/apollolake_rvp: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to a early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: Id6b55d7f3d3fbfc5b55497708f24006614760d03 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49434 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/tglrvp: do UART pad config at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I130fd26944169430a84c3609432b1b5283581c99 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49432 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-21mb/intel/jasperlake_rvp: do UART pad config at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: Ie3878b47b8e20c51b928a38df9ccedf2d50d478e Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49431 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 01:59:51 +0000