Age | Commit message (Collapse) | Author |
|
this and re-commiting so that the history and comments are correct.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3284 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
rdtsc.h shouldn't be included unless we really need it (and use it).
Trivial.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3283 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
doing a
pci_write_config8.
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3282 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3281 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
payloads assume
Coreboot initializes it. Coreboot v3 already does it.
Signed-off-by: Aaron Lwe <aaron.lwe@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3280 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
- W83627THF is strapped to 0x4e, not 0x2e
- there's no device 9 on PCI-E x1 bus, it should be device 0
- add mptable entries for AGR slot, based on info in user manual
- enable floppy drive controller so that some legacy VGA ROMs will work
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3279 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
buildrom and this bit was forgotten during r3092.
This is a trivial patch.
Signed-off-by: Ward Vandewege <ward@gnu.org>
Acked-by: Ward Vandewege <ward@gnu.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3278 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Two bits indicate OK and BAD for each operation PROBE READ ERASE WRITE.
8 bits out of 32 are in use now. No bits set means nothing has been tested.
For chips with at least one operation that is not tested or not working, the
user is asked to email a report to a special email adress so that the table
can be updated.
All chips are TEST_UNTESTED for now.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3277 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
for both serial ports, making it challenging to use COM2 for the early
console.
Enable the traditional I/O ranges 0x3f8 for COM1 and 0x2f8 for COM2.
Signed-off-by: Ed Swierk <eswierk@arastra.com>
Acked-by: Joseph Smith <joe@settoplinux.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3276 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Bari Ari <bari@onelabs.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3275 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
devices, because they need an unlock command first.
For this reason, ST M50FLW support is moved to a
new HW support module, because any change in jedec.c
would bear the risk to cause problems with the already
supported devices.
It's already tested with ST M50FLW080A; the other
chips of this family i dont have available, so i couldnt
test it.
Signed-off-by: Claus Gindhart <claus.gindhart@kontron.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3274 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
flashchips table. The read pointer was already checked properly.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3273 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Add a gettimeofday() implementation - it works pretty well, but it
drifts a little bit so its not very suitable for keeping time. It
works best to track changes in time over small periods of time.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3272 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
This was causing the returned counter value to be one more then it
should be when printing a single character.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Ward Vandewege <ward@gnu.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3271 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
The qemu keyboard controller defaults to using scancode set 2, we use set 1.
Turn on the translate mode in the keyboard controller to force the issue.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3270 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Apparently the previous version worked on luck. Fix the allocation
and add parens to better guide the compiler. Also, halt() if
the heap is poisoned (like by an overrun). Finally, fix calloc()
so that it actually works.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3269 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3268 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
The FAM10 code takes up more space in the uncompressed "ROMCC" portion
of coreboot. Also, It is still growing as features are added.
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3267 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
This doesn't save any space for me but it is the right thing to allow GCC to
optimize.
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3266 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
0xfec00000, this is reserved for APIC.
Signed-off-by: Aaron Lwe <aaron.lwe@gmail.com>
Acked-by: Joseph Smith <joe@settoplinux.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3265 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3264 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Peter did a nice job cleaning up my initial patch. Thanks!
Signed-off-by: Marc Jones <marc.jones@amd.com>
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Marc Jones <marc.jones@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3263 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Disabling it should help performance.
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3262 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
is based on amd-lx800/cs5536.
Tutorial: http://www.coreboot.org/IEI_LX_800_Build_Tutorial
Signed-off-by: Nikolay Petukhov <nikolay.petukhov@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3261 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
layout option, as well as areas, whose flash contents already contain the
desired data, will be skipped.
These ensures absolute data security of critical areas (BIOS boot block),
e.g. against a sudden power off or a CPU hangup during flashing. As a
nice side effect, it speeds up the flash process, if the BIOS to be flashed
is very similar to the version in flash.
Signed-off-by: Claus Gindhart <claus.gindhart@kontron.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3260 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
needs 172 more bytes, give it 512 and hope that's enough for a while.
Trivial.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3259 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3258 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Myles
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ward Vandewege <ward@gnu.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3257 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
white space in the s2892 and s2891 mptable.c files.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ward Vandewege <ward@gnu.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3256 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ward Vandewege <ward@gnu.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3255 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
This chip seems to be very similar to the SMSC DME1737, for coreboot
purposes it might even work without any code changes.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3254 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
secondary controller was ok). There were two problems: the master sata
controller was not being initialized, and the irqs for the secondary ports on
both controllers were not being set in the mptable.
Thanks for Jonathan Kollasch for all the help figuring out the IRQ problem.
While all ports work reliably under a recent kernel (2.6.24), sata is about
half as fast as under the proprietary bios, according to bonnie++. That still
needs fixing...
Signed-off-by: Ward Vandewege <ward@gnu.org>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3253 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Pstate intialization has moved to early init because it requires a warm reset.
Add CPUID setup and disable SMM access to late initialization.
Much of this code is leftover from porting from K8.
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3252 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
initialize them.
Supports single and split plane systems. Set P0 on all cores for best performance.
All APs will be in hlt(C1).
The platform warm rest logic has been updated to alway reset for HT and FID/VID setup. It is not optional anymore.
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3251 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
In addition, AP microcode is now updated in early initialization to support errata settings that require it.
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3250 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Add early MSR and PCI register initialization.
This fixes many default setting as well as erratas.
Some CPU core functions were moved from the HT init and platform specific code
to the generic Fam10 CPU code.
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3249 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
This fixes many default setting as well as erratas.
Some CPU core functions were moved from the HT init and platform specific code to the generic Fam10 CPU code.
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3248 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
It displays the coreboot printk buffer in RAM and let's you scroll through it.
This feature is only available for coreboot v3 though, as v2 doesn't have a
printk-buffer feature, yet.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3247 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3246 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
This solves the multiple keystroke issue that popped up recently.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3245 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
generic SMSC support, and corrects a small typo.
With this patch, coreboot v2 on a mainboard with SCH3112 has been
demonstrated to correctly use the serial port. No other chip
functions were tested.
Signed-off-by: Christopher Kilgour <techie@whiterocker.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3244 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
a bit less awkward (pun intended).
Signed-off-by: Ed Swierk <eswierk@arastra.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3243 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
checking for --build-id, if the user has specified one by setting CC
in the environment; there's no point in checking the native linker in
this case.
Signed-off-by: Ed Swierk <eswierk@arastra.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3242 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3241 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3240 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
into the payloads/external/tint directory.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3239 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Ulf Jordan <jordan@chalmers.se>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3238 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3237 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Use a simple one-liner for each of the functions. You can surely optimize
the code some more, but I chose not to do that in order to keep it readable.
When compiling with -Os the size differences are minimal.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3236 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
of functions while we're at it.
hex2bin() now also supports upper-case input characters.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3235 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
- Use _FOO_H include guard format everywhere.
- Add missing speaker.c prototypes to libpayload.h.
- Consistently use short form u8/u16/u32 instead of uint8_t et. al.
- kcofig: Use 'depends on' instead of 'depends', which seems deprecated.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3234 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Add a Geode video driver in lieu of VGA on Geode LX devices
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3233 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
recomendations.
Changes include the following:
fix > 4GB dqs tests
fix channel interleaving
ecc memory scrub updates
MC tristating updates
debug print changes
fix memory hoisting across nodes -
The DRAM Hole Address Register is set via devx in each node, but the Node
number <-> DRAM Base mapping and the Node number <-> DstNode mapping is
set in Node 0. The memmap is setup on node0 and copied to the other nodes
later. so dev, not devx. The bug was the hole was always being set on the
first node.
Signed-off-by: Marc Jones (marc.jones@amd.com)
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3232 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
The Geode video driver will require a number of support functions,
including udelay(), PCI bus walking and MSRs. This adds those functions
in preparation for the actual code.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3231 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Add a framework for multiple video console drivers. This is to prepare
for the Geode driver.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3230 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Slight tweak to to the install target to avoid copying .svn
files. Trivial self ack.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3229 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3228 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
easily for other payloads. Also, add a 'distclean' target (trivial).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3227 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
libpayload uses a ton of flags and other scary gcc and ld options. These
wrappers hide most of that from the user, so that using libpayload is as
easy as lpgcc -o hello hello.c
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3226 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3225 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
- Properly set LINES and COLS, needed for a real curses application.
- Implement notimeout() and wtimeout(), which are trivial.
- Implement a dummy flushinp() for now as it's needed by a curses
application I'm porting, will be replaced by something useful later.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3224 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Implement a timeout option for getchar() to return after so many
milliseconds. Also implement the same thing for curses using
the halfdelay() function.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3223 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3222 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Ed Swierk <eswierk@arastra.com>
Acked-by: Joseph Smith <joe@smittys.pointclark.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3221 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
patch.
Signed-off-by: Marc Jones (marc.jones@amd.com)
Acked-by: Marc Jones (marc.jones@amd.com)
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3220 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
This field is rarely used (and not used in the LX tables).
There is not a good reason to mask off non-exclusive IRQs.
Signed-off-by: Marc Jones(marc.jones@amd.com)
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3219 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
southbridges.
It also keeps the boot processes from rebooting through out the coreboot process.
Signed-off-by: Joseph Smith <joe@smittys.pointclark.net>
Acked-by: Corey Osgood <corey.osgood@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3218 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Following on the previous code to streamline the libpayload init code,
this removes the now unneeded stack structures.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3217 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Until now, the build would break, and even if it didn't the ELF would
triple-fault in QEMU.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3216 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
interpret whitespace as macro argument delimiter. Since the code is
preprocessed by gcc and the tokenizer may insert whitespace, that can
fail. http://sourceware.org/bugzilla/show_bug.cgi?id=669
The same change was committed in r3044 to the AMD CAR code.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3215 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
coreinfo features / modules will consume (trivial).
The measurements were done with libpayload r3213 (but compiled with -Os),
and coreinfo r3211 (also compiled with -Os).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3214 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
They're generally useful for lots of stuff, but especially for converting
to/from the compact 160 bit (20 byte) representation of SHA-1 hashes to
the "hex" representation (same as 'sha1sum' output), which is 40 bytes long.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3213 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3212 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
by not deleting build/config.h during 'make clean' (only in 'make distclean').
Also, change the default behaviour of 'make' from asking the user to
run 'make config' (or similar) to actually _run_ 'make config' without
asking questions. It's always possible to explicitly invoke
'make menuconfig' or 'make xconfig' and so on, of course.
Finally, make _all_ targets (allyesconfig, randconfig, and so on)
generate a build/config.h file, as we always #include it.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3211 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
This is also taken from the HelenOS project.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3210 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
"off" in Config.lb should cause the PCI device not to respond to
configuration requests.
Replace the existing code that I naively copied from esb6300 with
something that actually works on the 3100.
Signed-off-by: Ed Swierk <eswierk@arastra.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3209 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Joseph Smith <joe@smittys.pointclark.net>
Acked-by: Corey Osgood <corey.osgood@gmail.com>
Acked-by: Ed Swierk <eswierk@arastra.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3208 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Ed Swierk <eswierk@arastra.com>
Acked-by: Ed Swierk <eswierk@arastra.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3207 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
There are no boards that use the i82801DB (ICH4). The code does NOT work.
Signed-off-by: Joseph Smith <joe@smittys.pointclark.net>
Acked-by: Corey Osgood <corey.osgood@gmail.com>
Acked-by: Ed Swierk <eswierk@arastra.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3206 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
pci_locate_device() to locate the SMBus controller and LPC bridge
devices on the PCI bus. Since these devices are always located at a
fixed PCI bus:device:function, the code can be simplified by
hardcoding the devices.
Signed-off-by: Ed Swierk <eswierk@arastra.com>
Acked-by: Corey Osgood <corey.osgood@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3205 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Let the linker figure out the correct address and just CALL the
start_main entry point.
Signed-off-by: Klaus Schnass <dev@stuffit.at>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3204 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
displaying the current date/time in the lower-right corner (optional).
Also, only build/use coreinfo modules which were selected in kconfig. This
makes coreinfo truly modular, and you can save quite a bit of ROM space
by disabling unwanted parts of coreinfo.
Finally, simplify the Makefile a bit by getting rid of MODULES (and only
using OBJECTS).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3203 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
upper 128 bytes of NVRAM (if enabled).
For most chipsets this means using I/O ports 0x72/0x73, but at least
on some VIA chipsets (I tested the VIA VT8237R on actual hardware)
these ports won't work and you have to use 0x74/0x75. Thus, make this
a Kconfig option for now.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3202 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3201 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3200 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3199 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
the system automatically unless software resets the timer
periodically. The extra reboot extends boot time by several seconds.
The attached patch adds a function to the Intel 3100 southbridge code
that halts the TCO timer, thus preventing this extra reboot, and calls
the function early in the boot process on the Mt. Arvon board.
It also fixes a bug in the LPC device initialization -- the ACPI BAR
enable flag is bit 7, not bit 4.
Signed-off-by: Ed Swierk <eswierk@arastra.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3198 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Kenji Noguchi <tokyo246@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3197 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
You can see this by executing commands like this:
grep -r pci_assign_irqs coreboot/src/*
This basically AMD/LX based boards: pcengines/alix1c,
digitallogic/msm800sev, artecgroup/dbe61, amd/norwich, amd/db800.
Also for AMD/GX1 based boards need a patch
[http://www.pengutronix.de/software/ptxdist/temporary-src/references/geode-5530.patch]
for the right IRQ setup.
AMD/GX1 based boards is: advantech/pcm-5820, asi/mb_5blmp, axus/tc320,
bcom/winnet100, eaglelion/5bcm, iei/nova4899r, iei/juki-511p.
I have two ideas.
1. Delete duplicate code from AMD/LX based boards.
2. Add IRQ routing for AMD/GX1 boards in coreboot.
The pirq.patch for IRQ routing logically consist from of two parts:
First part of pirq.patch independent from type chipsets and assign IRQ for
ever PCI device. It part based on AMD/LX write_pirq_routing_table() function.
Second part of pirq.patch depends of type chipset and set PIRQx lines
in interrupt router. This part supports only CS5530/5536 interrupt routers.
IRQ routing functionality is included through PIRQ_ROUTE in Config.lb.
Tested on iei/juki-511p(cs5530a), iei/pcisa-lx(cs5536) and also on
TeleVideo TC7020, see
http://www.coreboot.org/pipermail/coreboot/2007-December/027973.html.
Signed-off-by: Nikolay Petukhov <nikolay.petukhov@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3196 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Somewhere characters are getting sign-extended, meaning that the
attributes of the drawing chars (>= 128) are wrong. Cast the value
before sending it to VGA.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3195 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
This decreases the size of the superiotool binary from ca. 1.1 MB to 600 KB.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3194 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Joseph Smith <joe@smittys.pointclark.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3193 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
bcd2dec()/dec2bcd() functions we'll need for (among other things)
converting some date/time parameters in CMOS.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3192 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
- Show PCI IDs as 4-digit numbers always.
- Cosmetic changes to make UI look more consistent.
- Drop MODULE_COUNT #define and use ARRAY_SIZE() where needed.
- Small fix to improve build system (create build/ when not there).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3191 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
strange reason (broken curses/VGA display, maybe others).
It'll be re-enabled when we fixed that.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3190 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Jon Dufresne <jon.dufresne@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3189 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
supported features configurable later (currently unused). Store all
build files and results (coreinfo.elf) in build/ now.
I'm self-acking this as (though non-"trivial") it doesn't affect coreinfo
in its functionality, this is more or less a "cosmetic" change to the
build interface ("make" -> "make menuconfig && make").
This is a kconfig checkout from the Linux kernel (where kconfig is being
actively maintained) from 03/2008. The hash identifying the last commit
to kconfig is 587c90616a5b44e6ccfac38e64d4fecee51d588c.
The amount of changes to kconfig itself has been kept as small as possible
to keep the diff small and to ease updating/porting to newer kconfig versions.
The following changes were performed on the upstream Linux kconfig:
- s/kernel/coreinfo/, and s/Linux/coreinfo/ in various strings.
- Consistently use the env. variable KERNELVERSION in all kconfig
interfaces -- e.g. config/menuconfig/gconfig/xconfig -- as version number.
- Hardcode our paths/filenames in some places (could be improved upstream).
- Always write .config and build/config.h, no matter which kconfig
interface is used (config/menuconfig/gconfig/xconfig). We want to
include build/config.h in our code.
- Adapt the kconfig Makefile for our purposes (build/ directory, rules, etc).
In addition, a few items in the coreinfo Makefile are needed for this to work.
This kconfig setup is successfully tested with all targets from 'make help':
config - Update current config utilising a line-oriented program
menuconfig - Update current config utilising a menu based program
xconfig - Update current config utilising a QT based front-end
gconfig - Update current config utilising a GTK based front-end
oldconfig - Update current config utilising a provided .config as base
silentoldconfig - Same as oldconfig, but quietly
randconfig - New config with random answer to all options
defconfig - New config with default answer to all options
allmodconfig - New config selecting modules when possible
allyesconfig - New config where all options are accepted with yes
allnoconfig - New config where all options are answered with no
For 'make defconfig' to work you have to do (which we don't need in coreinfo):
$ mkdir configs; touch configs/defconfig
You can also use 'make foo_defconfig' in which case kconfig will use a
file called 'configs/foo_defconfig' as basis.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3188 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Also, disable header() for now, as it's not being used.
Here are some stats on size differences:
- ls
23820 coreinfo.old.elf
23564 coreinfo.new.elf
- size *elf
text data bss dec hex filename
15199 2468 181904 199571 30b93 coreinfo.old.elf
14934 2468 181912 199314 30a92 coreinfo.new.elf
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3187 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
VGA cursor position register.
Have vga_scroll_up() and vga_clear_line() present row/column
arguments to the VIDEO() macro in the right order.
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
-This line, and those below, will be ignored--
M libpayload/drivers/vga.c
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3186 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3185 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|