summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-15soc/intel: Correct comment on HMRFPO_ENABLE HECI commandSridhar Siricilla
Correct comment on HMRFPO_ENABLE flow for CSE Lite SKU. In order to place CSE into SECOVER_MEI_MSG mode, below procedure has to be followed. 1. Ensure CSE boots from RO(BP1). - Set CSE's next boot partition to RO - Issue GLOBAL_RESET HECI command to reset the system 2. Send HMRFPO_ENABLE command to CSE. Further, no reset is required. TEST=Verified on hatch Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I213e02ba3898194fa6c8fe38fab34b5c19f25aa1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41340 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-15mb/google/volteer: Add delay to WWAN GPIO init sequenceAlex Levin
Based on Fibocom HW user manual RESET should be deasserted at least 20ms after the power on pin. The design for the reset pin is open drain connected to a pull up, so it is set to high-Z (configured as GPIO in) after 20ms. BUG=b:152013143 BRANCH=none TEST=traced the signals using a scope to verify timing is met. Signed-off-by: Alex Levin <levinale@chromium.org> Change-Id: I7c947d1bc4cce1f97383a2f2c254986e182661c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41356 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-15acpigen_ps2_keybd: Add keymap for Power keyRajat Jain
Power key is a special non-matrixed key. Chrome /powerd only listens to the keyboard device for this key, so add its keymap. BUG=b:155941390 TEST=Test that power key generates KEY_POWER in linux evtest Change-Id: I570602d9febcb5c17e58761f2004ee88be16c27f Signed-off-by: Rajat Jain <rajatja@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41382 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-14trogdor: Update pull for Sd-card detect pinShaik Sajida Bhanu
Configuring pull for SD-card detect pin. Without this SD-card detection is not working as expected Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org> Change-Id: I77bf355a049224784a160defa6bee66d0f9ceb75 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40534 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-05-14sc7180: GPIO: Add I2S configuration for sc7180vsujithk
Configuring GPIO Pins as I2S mode for Audio speaker. Change-Id: I681aa6d0d57671b0fd9b7bc88de6f2cc202a7af0 Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-05-14samsung/exynos5420: add resources during read_resources()Furquan Shaikh
The chipset code was incorrectly adding memory resources to the domain device after resource allocation occurred. It's not possible to get the correct view of the address space, and it's generally incorrect to not add resources during read_resources(). This change fixes the order by adding resources in read_resources(). Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I49ce6ac88c4cb7cd05ff9d78133593ce97304596 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41374 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-14soc/samsung/exynos5250: add resources during read_resources()Furquan Shaikh
The chipset code was incorrectly adding memory resources to the domain device after resource allocation occurred. It's not possible to get the correct view of the address space, and it's generally incorrect to not add resources during read_resources(). This change fixes the order by adding resources in read_resources(). Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I419be7edf289636b24b9a7d6c390866ade638de3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41373 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-14soc/nvidia/tegra124: add resources during read_resources()Furquan Shaikh
The chipset code was incorrectly adding memory resources to the domain device after resource allocation occurred. It's not possible to get the correct view of the address space, and it's generally incorrect to not add resources during read_resources(). This change fixes the order by adding resources in read_resources(). Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I16f0439679471366723a0084918a20cd95834831 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41372 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-14aspeed/ast2050: Fix when resources are addedFurquan Shaikh
This change moves adding of resources to read_resources() instead of set_resources(). Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I7d5e4aa0fc28dd35f774957ef303d8854aa07913 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41370 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-14soc/amd/stoneyridge: add resources during read_resources()Furquan Shaikh
The chipset code was incorrectly adding memory resources to the domain device after resource allocation occurred. It's not possible to get the correct view of the address space, and it's generally incorrect to not add resources during read_resources(). This change fixes the order by adding resources during read_resources(). Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I532f508936d5ec154cbcb3538949316ae4851105 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41369 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-14nb/intel/i440bx: add resources during read_resources()Furquan Shaikh
The chipset code was incorrectly adding memory resources to the domain device after resource allocation occurred. It's not possible to get the correct view of the address space, and it's generally incorrect to not add resources during read_resources(). This change fixes the order by adding resources in read_resources(). Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I84c1ba8645b548248a8bb8bf5bc4953d3be12475 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41368 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Keith Hui <buurin@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-14nb/intel/sandybridge: add resources during read_resources()Aaron Durbin
The chipset code was incorrectly adding memory resources to the domain device after resource allocation occurred. It's not possible to get the correct view of the address space, and it's generally incorrect to not add resources during read_resources(). Fix the order by hanging the resources off of the host bridge device. Change-Id: I8a7081020be43da055b7de5a56dd97a7b5a9f09c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-05-14mb/google/deltaur: Configure GPIO B11 as PMCALERTAnil Kumar
GPIO B11 pin should be configured as PMCALERT function. This is required for the intergrated USB-C feature to work in the SOC BUG=b:154778458, b:156288164 TEST= build and boot coreboot image on deltan. Test Type-C port enumeration on Chrome OS Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: I8f995901b0a50d2c74f57aba96f86134c9d569e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41378 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-14mb/google/volteer: Enable PCIEXP_HOTPLUG for TCSS TBT/USB4 portsFurquan Shaikh
This change enables PCIEXP_HOTPLUG to support resource allocation for TCSS TBT/USB4 ports. BUG=b:149186922 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I4cb820e83da40434b00198b934453805e35ef1ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/41156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-14soc/intel: Drop ABOVE_4GB_MEM_BASE_SIZE and use cpu_phys_address_size()Furquan Shaikh
This change uses cpu_phys_address_size() to calculate the size of high MMIO region instead of a macro for each SoC. This ensures that the entire range above TOUUD that can be addressed by the CPU is used for MMIO above 4G boundary. Change-Id: I01a1a86c0c65856f9f35185c2f233c58f18f5dfe Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-14soc/intel: Always advertise MMIO window above 4G in ACPI tablesFurquan Shaikh
There should be no harm in advertising the MMIO window above 4G in ACPI tables unconditionally. OS can decide whether or not to use the window. This change removes the config option enable_above_4GB_mmio and instead adds the correct MMIO window (above 4G) details to ACPI tables always. Change-Id: Ie728f6ee7f396918e61b29ade862b57dac36cb08 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41276 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-14soc/intel/common/block/systemagent: Use TOUUD as base for MMIO above 4GFurquan Shaikh
This change sets the base for MMIO above 4G to TOUDD. It matches what is used by resource allocator if MMIO resources are allocated above 4G and also matches the expectation in northbridge.asl. This change also gets rid of the macro ABOVE_4GB_MEM_BASE_ADDRESS since it is now unused. BUG=b:149186922 TEST=Verified that kernel does not complain about MMIO windows above 4G. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ibbbfbdad867735a43cf57c256bf206a3f040f383 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41155 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13mainboard/lenovo/x230: Add ThinkPad x230s as a variantBill XIE
The code is based on autoport and that for X230. Major differences are: - Only one DDR3 slot - HM77 PCH - M.2 socket instead of mini pci-e - no docking - no tpm Tested: - CPU i5-3337U - Slotted DIMM 8GiB - Camera - pci-e and usb2 on M.2 slot with A key for wlan - sata and usb2 (no superspeed components) on M.2 slot with B key for wwan - On board SDHCI connected to pci-e - USB3 ports - libgfxinit-based graphic init - NVRAM options for North and South bridges - Sound - Thinkpad EC - S3 - Linux 4.9 within Debian GNU/Linux stable, loaded from Seabios. Untested: - Touch screen, which is said to work under ubuntu but not debian. Change-Id: Ie537645d5ffaee799e79af2f821f80c3ebd2dfec Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-13mb/google/puff: add a region to cache SPD dataJamie Chen
This patch adds a SPI rom region RW_SPD_CACHE on Puff and it can be used on spd_cache to reduce reading SPD data from SODIMM by smbus. It's for saving the boot time and it can be used to trigger MRC retraining when memory DIMM is changed. BUG=b:146457985 BRANCH=None TEST=Build puff successfully and verified below two items. 1. To change memory DIMM can trigger retraining. 2. one DIMM save the boot time : 158ms two DIMM save the boot time : 265ms Change-Id: I8d07fddf113a767d62394cb31e33b56f22f74351 Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-05-13lib/spd_cache: add spd_cache common codeJamie Chen
This patch adds some spd_cache functions. They are for implementing the spd_cache. It's for reducing the SPD fetch time when device uses SODIMMs. The MRC cache also includes SPD data, but there is no public header file available to decode the struct of MRC. So SPD cache is another solution. BUG=b:146457985 BRANCH=None TEST=Build puff successfully and verified below two items. one DIMM save the boot time : 158ms two DIMM save the boot time : 265ms Change-Id: Ia48aa022fabf8949960a50597185c9d821399522 Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-05-13lib/spd_bin: add get_spd_sn functionJamie Chen
This patch adds the get_spd_sn function. It's for reading SODIMM serial number. In spd_cache implementation it can use to get serial number before reading whole SPD by smbus. BUG=b:146457985 BRANCH=None TEST=Wrote sample code to get the serial number and ran on puff. It can get the serial number correctly. Change-Id: I406bba7cc56debbd9851d430f069e4fb96ec937c Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40414 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13mb/google/volteer/variants/halvor: add two SPD filesNick Vaccaro
Adds SPD_LPDDR4X_556b_1R_32Gb_8GbD_QDP_4267.spd.hex, which will be used initially for the "H9HKNNNCRMBVAR-NEH" SKhynix part as DRAM ID #0. Adds SPD_LPDDR4X_556b_1R_64Gb_16GbD_QDP_4267.spd.hex, which will be used initially for the "MT53E1G64D4SQ-046 WT:A" Micron part as DRAM ID #1. BUG=b:155423877 TEST=none Change-Id: I5580f602cd411e415dafcb36bd1ffa43c4f02f60 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41076 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13src/mainboard: Remove unused 'include <stdlib.h>'Elyes HAOUAS
Found using following commande: diff <(git grep -l '#include <stdlib.h>' -- src/) <(git grep -l ' memalign\|malloc\|free' -- src/) |grep -v vendorcode |grep '<' Change-Id: Ib2ee840a10de5c10d57aa7a75b805ef69dc8da84 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41241 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13mb/google/volteer/variants/volteer: Add three generic SPD filesNick Vaccaro
- Add SPD_LPDDR4X_200b_1R_16Gb_16Row_DDP_4267.spd.hex, initially used for the SKhynix H9HCNNNBKMMLXR-NEE part with DRAM ID #2 - Add SPD_LPDDR4X_200b_2R_64Gb_ODP_4267.spd.hex, initially used for the SKhynix H9HCNNNFAMMLXR-NEE part with DRAM ID #3 - Add SPD_LPDDR4X_200b_2R_32Gb_QDP_4267.spd.hex, initially used for the Micron MT53E1G32D2NP-046 WT:A part with DRAM ID #4 BUG=b:147857288 TEST=none Change-Id: I60d8bb05a4d6d3608adc7de69efc8623d1ca610d Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41126 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13src: Remove unused '#include <stddef.h>'Elyes HAOUAS
Unused includes found using following commande: diff <(git grep -l '#include <stddef.h>' -- src/) <(git grep -l 'size_t\|ssize_t\|wchar_t\|wint_t\|NULL\|DEVTREE_EARLY\|DEVTREE_CONST\ |MAYBE_STATIC_NONZERO\|MAYBE_STATIC_BSS\|zeroptr' -- src/)|grep '<' |grep -v vendor |grep -vF '.h' Change-Id: Ic54b1db995fe7c61b416fa5e1c4022238e4a6ad5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41150 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13src: Remove unused '#include <stdint.h>'Elyes HAOUAS
unused includes of <stdin.h> found using following commande: diff <(git grep -l '#include <stdint.h>' -- src/) <(git grep -l 'int8_t\|uint8_t\|int16_t\|uint16_t\|int32_t\|uint32_t\|int64_t\| uint64_t\|intptr_t\|uintptr_t\|intmax_t\|uintmax_t\|s8\|u8\|s16\| u16\|s32\|u32\|s64\|u64\|INT8_MIN\|INT8_MAX\|UINT8_MAX\|INT16_MIN\ |INT16_MAX\|UINT16_MAX\|INT32_MIN\|INT32_MAX\|UINT32_MAX\|INT64_MIN\ |INT64_MAX\|UINT64_MAX\|INTMAX_MIN\|INTMAX_MAX\|UINTMAX_MAX' -- src/) |grep '<' |grep -v vendor |grep -vF '.h' Change-Id: Icb9b54c6abfb18d1e263665981968a4d7cccabeb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41148 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13ec/lenovo/h8: Reintroduce h8_mb_init() for specific boardsBill XIE
Mainboard specific dock-init mechanism introduced https://review.coreboot.org/c/coreboot/+/36093 works on most boards, but https://ticket.coreboot.org/issues/256 shows that some boards (e.g. x201 and t410) need communication with h8 EC to enable or disable dock, (in dock_connect() and dock_disconnect() respectively) so they must be done after the h8 EC is brought up, which is not garanteed in the above mainboard specific dock-init mechanism. This time, a hook function h8_mb_init() will be called at the end of h8_enable(). (in place of the ancient h8_mainboard_init_dock() removed in CB:36093) Its default implementation is a weak empty function, but could be overrided with a strong one for boards needing to perform actions which should be done after h8 EC is brought up. This should fix the regression detected in https://ticket.coreboot.org/issues/256 Change-Id: I3674fbfeab2ea2cd2a4453a8e77521157d553388 Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-05-13soc/amd/picasso: Enable eSPI capability for PicassoFurquan Shaikh
This change selects SOC_AMD_COMMON_BLOCK_HAS_ESPI which enables the capability for using eSPI on Picasso. Additionally, it also calls espi_setup() and espi_configure_decodes() if mainboard enables use of eSPI and skips LPC decodes in that case. BUG=b:153675913,b:154445472 Change-Id: I4876f1bff4305a23e8ccc48a2d0d3b64cdc9703d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-05-13soc/amd/picasso: Use lpc_early_init() from common lpc driverFurquan Shaikh
This change uses lpc_early_init() for enabling and configuring LPC using the common block LPC driver. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I65784b481ae598bf3a85392ae4fe281aac974097 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41273 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13soc/amd/common/block: Add support for configuring eSPI connection to slaveFurquan Shaikh
This change adds a helper function espi_setup() which allows SoCs to configure connection to slave. Most of the configuration is dependent upon mainboard settings in espi_config done as part of the device tree. The general flow for setup involves the following steps: 1. Set initial configuration (lowest operating frequency and single mode). 2. Perform in-band reset and set initial configuration since the settings would be lost by the reset. 3. Read slave capabilities. 4. Set slave configuration based on mainboard settings. 5. Perform eSPI host controller configuration to match the slave configuration and set polarities for VW interrupts. 6. Perform VW channel setup and deassert PLTRST#. 7. Perform peripheral channel setup. 8. Perform OOB channel setup. 9. Perform flash channel setup. 10. Enable subtractive decoding if requested by mainboard. BUG=b:153675913 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I872ec09cd92e9bb53f22e38d2773f3491355279e Reviewed-on: https://review.coreboot.org/c/coreboot/+/41272 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13mb/google/volteer: move SPD files to variant directoriesNick Vaccaro
Memory SPD files for each variant are now stored in the variant's mb/google/volteer/variants/<variant_name>/spd directory instead of storing them in mb/google/volteer/spd. This change moves SPDs to where they are needed and changes the makefile to look for them in their new locations. BUG=b:156126658 TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot a proto2 SKU4 to the kernel. Change-Id: I759c979027477a2a4c5489a6b12278799488d6e7 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41184 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13soc/mediatek: improve ca53 frequency change procedureWeiyi Lu
To change frequency, the SOC PLL team suggests procedure below: First, we need to enable the intermediate clock and switch the ca53 clock source to the intermediate clock. Second, disable the armpll_ll clock output. Third, raise armpll_ll frequency and enable the clock output. The last, switch the ca53 clock source back to armpll_ll and disable the intermediate clock. BUG=b:154451241 BRANCH=jacuzzi TEST=Boots correctly on Jacuzzi. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Change-Id: Ib9556ba340da272fb62588f45851c93373cfa919 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41077 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13espi_debug: Use switch case instead of if-elseFurquan Shaikh
This change updates espi_debug.c to use switch case instead of if-else for operating frequency and i/o mode prints. This is done to address the review comments received on CB:41254. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I4f323b79f030818e2daa983d4f17ddf7a3192171 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41346 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13Remove new additions of "this file is part of" linesFurquan Shaikh
CB:41194 got rid of "this file is part of" lines. However, there are some changes that landed right around the same time including those lines. This change uses the following command to drop the lines from new files: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ic3c1d717416f6b7e946f84748e2b260552c06a1b Reviewed-on: https://review.coreboot.org/c/coreboot/+/41342 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13soc/amd/picasso: Mark FCH MMIO addresses as non-postedRaul E Rangel
Immediately following FSP-S, update the data fabric routing registers to make the region between HPET and LAPIC as non-posted. If AGESA is modified to do this, we can delete data_fabric_util.c. If AGESA is modified to not program the registers, then we can simplify data_fabric_set_mmio_np(). BUG=b:147042464, b:156296146 TEST=boot trembyle Change-Id: Idbafaac158f5a4c533d2d88db79bb4d6244e5355 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41268 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13soc/amd/picasso: Add data fabric pci_devsRaul E Rangel
The device ids are already defined in include/device/pci_ids.h as PCI_DEVICE_ID_AMD_FAM17H_DF*. BUG=b:147042464 TEST=Build trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ic68a1067e5976af972592d7352c40a5c66dbeb8c Reviewed-on: https://review.coreboot.org/c/coreboot/+/41267 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-13soc/amd/picasso: Add data fabric register definitionsRaul E Rangel
These are used to setup the data fabric. Definitions came from 55570-B1 Rev 3.14 - PPR for AMD Family 17h Model 18h BUG=b:147042464 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib51f6e2fd304da9948d6625608af71f25b974854 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41266 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13soc/amd/picasso: Delete northbridgeMarshall Dawson
Family 17h devices are designed with a new internal architecture, frequently referred to as the data fabric. Although designed to behave somewhat like the older integrated northbridge designs, the D18Fx definitions are completely new. The previous northbridge.c was copied from stoneyridge which is completely different. Change-Id: Id70cbda99657249179fb8cf5e461dd6a37ec9153 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41265 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13soc/amd/picasso: Extract reset flags from northbridge.hRaul E Rangel
These are not northbridge functions. BUG=b:147042464 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ia9e7d4c7554788a9fdbfdb90e6ead60060cc4c30 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41264 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13soc/amd/picasso: Move ACP register to acp.hRaul E Rangel
This is a device specific register, not a northbridge register. BUG=b:147042464 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I97b63571e336f541dcb274e4c8c608f6fc59ff42 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41263 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13soc/amd/picasso: Move acpi_fill_mcfgRaul E Rangel
Move this with the other acpi functions. BUG=b:147042464 TEST=build trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I24bd5c7d7c90968759ac745012e7bbc47f0ef6a8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41262 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13soc/amd/common/block/psp: Remove unused northbridge headerRaul E Rangel
BUG=b:147042464 TEST=Build trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5df618f69a7dcca47b9733efb3699b37fd171e90 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41261 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13mb/google/volteer: Enable keyboard backlight featureAngel Pons
This enables the keyboard backlight feature in ACPI for volteer. BUG=b:156326050 TEST=Verified 'KBLT' shows up in the DSDT ACPI table. Change-Id: Id1b1bb059368b0cc36cb06e6cdb8b989060a1dde Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41281 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-05-13mb/google/dedede/variants/waddledoo: Modify ELAN touchscreen slave addressIan Feng
Modify ELAN EKTH6918 USI touchscreen slave address to 0x10. BUG=b:152936745 TEST="emerge-dedede coreboot chromeos-bootimage", build successful. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I999967b0f37c82ff7811e3b6117baab795a11195 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-13mb/google/octopus/variants/foob: Disable xHCI compliance modeTommie
When any USB image disk is connected to the DUT through HUAWEI/APPLE Dongle, press Ctrl + u on the dev screen, it cannot boot from USB. We found the SS hub cannot be enumerated. So disable xHCI compliance mode. BRANCH=octopus BUG=b:155347573 TEST=Confirm successful boot from USB Change-Id: Iea4a3df156da0627336f7d6c1e03837b6cf0e7f2 Signed-off-by: tong.lin <tong.lin@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40905 Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13soc/amd/common/block/spi: Include mmio.h in fch_spi_ctrl.cFurquan Shaikh
fch_spi_ctrl.c uses read*()/write*() functions which are declared in arch/mmio.h. This change includes the file arch/mmio.h in fch_spi_ctrl.c. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I6540004512af1f59f5fb300a3a4818b87ad94bfa Reviewed-on: https://review.coreboot.org/c/coreboot/+/41271 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-05-13soc/amd/common/block/lpc: Add helper function lpc_early_init()Furquan Shaikh
This change adds a helper function lpc_early_init() which does the following things: 1. Enables LPC controller 2. Disables any LPC decodes (These can be set up later by SoC or mainboard as required). 3. Sets SPI base so that MMIO base for SPI and eSPI controllers is initialized. BUG=b:153675913 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I016f29339466c3fee92fe9b62a13d72297c29b8e Reviewed-on: https://review.coreboot.org/c/coreboot/+/41257 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-05-12util/sconfig: Add LPC and ESPI busesRaul E Rangel
Picasso has an LPC and eSPI bridge on the same PCI DEVFN. They can both be active at the same time. This adds a way to specify which devices belong on which bus. i.e., device pci 14.3 on # - D14F3 bridge device espi 0 on chip ec/google/chromeec device pnp 0c09.0 on end end end device lpc 0 on end end BUG=b:154445472 TEST=Built trembyle and saw static.c contained the espi bus. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I0c2f40813c05680f72e5f30cbb13617e8f994841 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-12soc/intel/skylake: Add ability to set root port ASPMWim Vervoorn
The default setting of the root port ASPM configuration can be overridden from the device tree by using a non zero value. BUG=N/A TEST=tested on facebook monolith Change-Id: I85c545d5eacb10f43b94228f1caf1163028645e0 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-05-12soc/intel/tigerlake: Correct IRQ interruptWonkyu Kim
Current Interrupt setting use 2nd parameters as device function number. - Correct as interrupt pin number according to _PRT package format. {Address, pin, Source, Source index} - Use irq number directly rather than irq definition as its number is not for PCI device. The issue found while enabling GBE and GBE interrupt is not working without this change. Reference - ACPI spec 6.2.13 _PRT - FSP reference code: https://github.com/otcshare/CCG-TGL-Generic-SiC/blob/TGL.3163.01/ ClientOneSiliconPkg/IpBlock/Itss/LibraryPrivate/PeiItssPolicyLib/ PeiItssPolicyLibVer2.c - BIOS reference code: https://github.com/otcshare/CCG-TGL-Generic-Full/blob/master/ TigerLakeBoardPkg/Acpi/AcpiTables/Dsdt/PciTree.asl TEST=boot to OS with GBE enabled and check GBE interrupt Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I8084b30c668c155ebabbee90b5f70054813b328e Reviewed-on: https://review.coreboot.org/c/coreboot/+/41153 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12southbridge/intel/common: Add Process CallChristian Walter
Add functionality to use process call cycle. It can be used to write/read data to/from e.g. EEPROM attached to SMBus Controller via I2C. Tested on: * C246 Change-Id: Ifdac6cf70a4ce744601f5d152a83d2125ea88360 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39875 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12device/pci_device: Extract pci_domain_set_resources from SOCRaul E Rangel
pci_domain_set_resources is duplicated in all the SOCs. This change promotes the duplicated function. Picasso was adding it again in the northbridge patch. I decided to promote the function instead of duplicating it. BUG=b:147042464 TEST=Build and boot trembyle. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Iba9661ac2c3a1803783d5aa32404143c9144aea5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-12soc/intel/jasperlake: Remove deprecated UPDsRonak Kanabar
IedSize and EnableC6Dram are removed in JSL FSP v2114 so remove them from 'fsp_params.c'. BUG=155054804 BRANCH=None TEST=Build and boot JSLRVP Change-Id: I47bd3f87bdb59625098c0d734695f02d738f8bbd Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41239 Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12soc/intel/jasperlake: Add SATA related UPDs configurationRonak Kanabar
This patch control SATA related UPDs based on the devicetree configuration as per each board's requirement. BUG=b:155595624 BRANCH=None TEST=Build, boot JSLRVP, Verified UPD values from FSP log Change-Id: I4f7e7508b8cd483508293ee3e7b760574d8f025f Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-05-12mb/intel/jasperlake_rvp: Remove SataEnable deviceetree configRonak Kanabar
SataEnable UPD override will be filled using devicetree pci device status check. Change-Id: I957dfcf139acd4f4dd5723bc1b010ec45ec91651 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41227 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12soc/amd/common/block/lpc: Configure io/mmio windows differently for LPC and eSPIFurquan Shaikh
This change updates lpc_enable_children_resources() to configure IO and MMIO resources differently depending upon whether the mainboard wants to setup decode windows for LPC or eSPI. BUG=b:154445472,b:153675913 Change-Id: Ie8803e934f39388aeb6e3cbd7157664cb357ab23 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-05-12soc/amd/common/block/lpc: Provide an option to use static eSPI BARFurquan Shaikh
This change provides a helper function espi_update_static_bar() that informs the eSPI common driver about the static BAR to use for eSPI controller instead of reading the SPIBASE. This is required to support the case of verstage running on PSP. BUG=b:153675913 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I1f11bb2e29ea0acd71ba6984e42573cfe914e5d7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41256 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-05-12soc/intel/tigerlake: Control SATA and DMI power optimizationShaunak Saha
FSP provides the UPD's for SATA and DMI power optimization. In this patch we are adding the soc's config support to set those power optimization bits in FSP. By default those optimizations are enabled. To disable those we need to set the DmiPwrOptimizeDisable and SataPwrOptimizeDisable to 1 in devicetree. BUG=b:151162424 BRANCH=None TEST=Build and boot volteer and TGL RVP. Change-Id: Iefc5e7e48d69dccae43dc595dff2f824e53f5749 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40005 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-12soc/amd/common/block/lpc: Add helpers for managing eSPI decodeFurquan Shaikh
This change adds the following helper functions for eSPI decode: 1. espi_open_io_window() - Open generic IO window decoded by eSPI 2. espi_open_mmio_window() - Open generic MMIO window decoded by eSPI 3. espi_configure_decodes() - Configures standard and generic I/O windows using the espi configuration provided by mainboard in device tree. BUG=b:153675913,b:154445472 Change-Id: Idb49ef0477280eb46ecad65131d4cd7357618941 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41073 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12soc/amd/common/block: Add header file for eSPI register definitionsFurquan Shaikh
This change adds eSPI register definitions for I/O and MMIO decode using eSPI on AMD SoCs. Additionally, it also adds a macro to define the offset of ESPI MMIO base from SPI MMIO base. BUG=b:153675913 Change-Id: Ifb70ae0c63cc823334a1d851faf4dda6d1c1fc1a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-12espi: Add support for debug helper to print slave capabilitiesFurquan Shaikh
This change adds a Kconfig option to enable eSPI debugging that pulls in a helper function to print slave capabilities. BUG=b:153675913 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I8ff250fe85dfa9370bf93ce3c7e2de5c069bf9e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-12espi: Add some helper functions for espi capability checkFurquan Shaikh
This change adds helper functions that can be used to check support for different slave capabilities. BUG=b:153675913 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ic66b06f9efcafd0eda4c6029fa67489de76bbed4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41253 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-12espi: Add definitions for eSPI VW index messsagesFurquan Shaikh
This change adds eSPI VW index message definitions as per per Enhanced Serial Peripheral Interface Base Specification (document # 327432-004 Revision 1.0) Chapter 5 "Transaction Layer". BUG=b:153675913 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I5c04d4de222e16d3b8e2a5fb2fc4107ea278a35b Reviewed-on: https://review.coreboot.org/c/coreboot/+/41252 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12espi: Add definitions for eSPI slave registersFurquan Shaikh
This change adds eSPI slave register definitions as per Enhanced Serial Peripheral Interface Base Specification (document # 327432-004 Revision 1.0) Chapter 7 "Slave Registers". BUG=b:153675913 Change-Id: Icee53817476b7d50ff26e64bbc2c3f5afb19a7cd Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41071 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-05-12soc/amd/common/block/lpc: Set LPC_IO_PORT_DECODE_ENABLE to 0 when disabling ↵Furquan Shaikh
decodes This change sets LPC_IO_PORT_DECODE_ENABLE to 0 as part of lpc_disable_decodes() to ensure that the I/O port decodes are also disabled. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I1474f561997f2ee1231bd0fcaab4d4d4e98ff923 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-12soc/amd/picasso: Use SPI configuration support from common block SPI driverFurquan Shaikh
This change switches to using the common block SPI driver for performing early SPI initialization and for re-configuring SPI speed and mode after FSP-S has run. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ia3186ce59b66c2f44522a94fa52659b4942649b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-05-12soc/amd/picasso: Add support for using common SoC configurationFurquan Shaikh
This change adds support for using common SoC configuration by adding soc_amd_common_config to soc_amd_picasso_config and helper function to return pointer to the structure to amd common block code. Change-Id: I8bd4eac3b19c9ded2d9a3e95ac077f014730f9d1 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41249 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-12soc/amd/common/block/spi: Add support for common SPI configurationFurquan Shaikh
This change adds support for following SPI configuration functions to common block SPI driver and exposes them to be used by SoC: 1. fch_spi_early_init(): Sets up SPI ROM base, enables SPI ROM, enables prefetching, disables 4dw burst mode and sets SPI speed and mode. 2. fch_spi_config_modes(): This allows SoC to configure SPI speed and mode. It uses SPI settings from soc_amd_common_config to configure the speed and mode. These functions expect SoC to include soc_amd_common_config in SoC chip config and mainboard to configure these settings in device tree. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ia4f231bab69e8450005dd6abe7a8e014d5eb7261 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41248 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12Doc/mb/lenovo: Fix broken linkAngel Pons
Change-Id: Iafa7e0f3734042e35e8b4ea440baf1c3c3d147e9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-05-12pciexp_device: Add option to allocate prefetch memory above 4G boundaryFurquan Shaikh
This change adds a Kconfig option to request allocation of prefetch memory for hotplug devices above the 4G boundary. In order to select this option by default and still allow users to disable this if required, another option is added to request allocation of prefetch memory below 4G boundary which defaults to n but can be overriden by mainboards. Without this change, if the number of pciexp bridges supporting hot-plug is more than 4 or if the reserved prefetch memory size for hot-plug cases was increased, then the resource allocator would fail to satisfy the resource requirement below 4G boundary. BUG=b:149186922 TEST=Enabled resource allocation above 4G for prefetch memory on volteer and verified that it gets allocated above 4G boundary. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I061d935eef9fcda352230b03b5cf14e467924e50 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39489 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12pci_device: Extend PCI domain limit to 64-bitFurquan Shaikh
This change updates the resource limit for PCI domain to allow resource allocation above 4G boundary. The resource limit is set to the highest physical address for the CPU. BUG=b:149186922 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Idfcc9a390d309886ee2b7880b29502c740e6578e Reviewed-on: https://review.coreboot.org/c/coreboot/+/39488 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12device: Enable resource allocation above 4G boundaryFurquan Shaikh
This change adds support for allocating resources above the 4G boundary by making use of memranges for resource windows enabled in the previous CL. It adds a new resource flag IORESOURCE_ABOVE_4G which is used in the following ways: a) Downstream device resources can set this flag to indicate that they would like to have their resource allocation above the 4G boundary. These semantics will have to be enabled in the drivers managing the devices. It can also be extended to be enabled via devicetree. This flag is automatically propagated by the resource allocator from downstream devices to the upstream bridges in pass 1. It is done to ensure that the resource allocator has a global view of downstream requirements during pass 2 at domain level. b) Bridges have a single resource window for each of mem and prefmem resource types. Thus, if any downstream resource of the bridge requests allocation above 4G boundary, all the other downstream resources of the same type under the bridge will be allocated above 4G boundary. c) During pass 2, resource allocator at domain level splits IORESOURCE_MEM into two different memory ranges -- one for the window below 4G and other above 4G. Resource allocation happens separately for each of these windows. d) At the bridge level, there is no extra logic required since the resource will live entirely above or below the 4G boundary. Hence, all downstream devices of any bridge will fall within the window allocated to the bridge resource. To handle this case separately from that of domain, initializing of memranges for a bridge is done differently than the domain. Limitation: Resources of a given type at the bridge or downstream devices cannot live both above and below 4G boundary. Thus, if a bridge has some downstream resources requesting allocation for a given type above 4G boundary and other resources of the same type requesting allocation below 4G boundary, then all these resources of the same type get allocated above 4G boundary. BUG=b:149186922 TEST=Verified that resources get allocated above the 4G boundary correctly on volteer. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I7fb2a75cc280a307300d29ddabaebfc49175548f Reviewed-on: https://review.coreboot.org/c/coreboot/+/39487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-12device: Enable resource allocator to use multiple rangesFurquan Shaikh
This change updates the resource allocator in coreboot to allow using multiple ranges for resource allocation rather than restricting available window to a single base/limit pair. This is done in preparation to allow 64-bit resource allocation. Following changes are made as part of this: a) Resource allocator still makes 2 passes at the entire tree. The first pass is to gather the resource requirements of each device under each domain. It walks recursively in DFS fashion to gather the requirements of the leaf devices and propagates this back up to the downstream bridges of the domain. Domain is special in the sense that it has fixed resource ranges. Hence, the resource requirements from the downstream devices have no effect on the domain resource windows. This results in domain resource limits being unmodified after the first pass. b) Once the requirements for all the devices under the domain are gathered, resource allocator walks a second time to allocate resources to downstream devices as per the requirements. Here, instead of maintaining a single window for allocating resources, it creates a list of memranges starting with the resource window at domain and then applying constraints to create holes for any fixed resources. This ensures that there is no overlap with fixed resources under the domain. c) Domain does not differentiate between mem and prefmem. Since they are allocated space from the same resource window at the domain level, it considers all resource requests from downstream devices of the domain independent of the prefetch type. d) Once resource allocation is done at the domain level, resource allocator walks down the downstream bridges and continues the same process until it reaches the leaves. Bridges have separate windows for mem and prefmem. Hence, unlike domain, the resource allocator at bridge level ensures that downstream requirements are satisfied by taking prefetch type into consideration. e) This whole 2-pass process is performed for every domain in the system under the assumption that domains do not have overlapping address spaces. Noticeable differences from previous resource allocator: a) Changes in print logs observed due to flows being slightly different. b) Base, limit and size of domain resources are no longer updated based on downstream requirements. c) Memranges are used instead of a single base/limit pair for determining resource allocation. d) Previously, if a resource request did not fit in the available base/limit window, then the resource would be allocated over DRAM or any other address space defeating the principle of "no overlap". With this change, any time a resource cannot fit in the available ranges, it complains and ensures that the resource is effectively disabled by setting base same as the limit. e) Resource allocator no longer looks at multiple links to determine the right bus for a resource. None of the current boards have multiple buses under any downstream device of the domain. The only device with multiple links seems to be the cpu cluster device for some AMD platforms. BUG=b:149186922 TEST=Verified that resource allocation looks correct based on addresses assigned on Volteer. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ia1f089877c62e119c6a994a10809c9cc0050ec9a Reviewed-on: https://review.coreboot.org/c/coreboot/+/39486 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12inteltool: fix dumping of Lynx Point LP and Wildcat Point PM registersIru Cai
Currently inteltool uses the addresses and names of the PCH of previous generations. It's wrong for Lynx Point LP and Wildcat Point. The addresses and names of the I/O registers can be found in "Mobile 4th Generation Intel Core Processor Family I/O Datasheet" (Document Number: 329003-003) for Lynx Point LP and "Mobile 5th Generation Intel Core Processor Family I/O, Intel Core M Processor Family I/O, Mobile Intel Pentium Processor Family I/O, and Mobile Intel Celeron Processor Family I/O Datasheet" (Document Number: 330837-004) for Wildcat Point. Change-Id: If6ba718ccff077aa89affec89018bd7923527466 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40273 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12Documentation/getting_started: Fix typoPaul Menzel
Change-Id: I41571c45719dfade49a021b6bafe80afdcb7b581 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-05-12soc/intel/skl: Drop weak mainboard_memory_init_paramsAngel Pons
We should not need that. Change-Id: Ic0181a300670ed7ee999dafedac79f3f89bfbee9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Michael Niewöhner
2020-05-12Revert "sb/intel/common/acpi: Add more Windows versions"Nico Huber
This reverts commit cc805d9dd64ca2d3c8de2b2de2ea7c53b387ff8f. Advertising certain Windows versions triggers different paths in the OS. As there may also be device specific quirks in the OS, such changes need to be tested thoroughly on all affected devices. There was at least one very subtle regression introduced by this. When Linux sees "Windows 2012" support advertised, it disables the `acpi_video` backlight controls, at least on devices with Intel IGD. Without user-space handling the ACPI events, keyboard backlight controls stop working. Moreover, the commit message didn't state any reason for this change. Why was it merged? Change-Id: I722075f8e8f836b039fb8b8277e665fb49dac8f4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-12Revert "mb/{lenovo/x201,packardbell/ms2290}/acpi: Use GOS method"Nico Huber
This reverts commit b3100775ae29caebd068db8f6209561abda2fb0c. This was part of a series that moved things to common code and causes regressions. Change-Id: I239906e498c8352e6880408744f176a8aeb13dc8 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-12nb/intel/i440bx: Drop mainboard_enable_serial()Keith Hui
All boards using this northbridge now enable serial in bootblock, so this is no longer needed. Change-Id: I6baf2de81870dbba2a7f1abb3f1fdd6716d64511 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41048 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12soc/amd/common/block/lpc: Split lpc_set_spibase() into two functionsFurquan Shaikh
This change splits lpc_set_spibase() into two separate functions: lpc_set_spibase() - Sets MMIO base address for SPI controller and eSPI controller (if supported by platforms) lpc_enable_spi_rom() - Enables SPI ROM This split is done to allow setting of MMIO base independent of ROM enable bits. On platforms like Picasso, eSPI base is determined by the same register and hence eSPI can set the BAR without having to touch the enable bits. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I3f270ba1745b4bb8a403f00cd069a02e21d444be Reviewed-on: https://review.coreboot.org/c/coreboot/+/41247 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-05-12soc/amd/common/block: Add support for common config for AMD SoCsFurquan Shaikh
This change adds support for struct soc_amd_common_config that allows multiple AMD SoCs to share common configuration. This can then be used by common/block drivers to get the required configuration from device tree. It also provides function declaration for soc_get_common_config() that needs to be provided by SoCs making use of the common configuration structure. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Idb0d797525414c99894a8e4ede65469381db7794 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41246 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12Documentation/releases: Update for 4.12Patrick Georgi
Fill in some blanks for 4.12, mark it done, add template for 4.13. Also update the list of vboot supported boards. Change-Id: Id6b663f13367eb40e66af30aadd33991c8dd635c Signed-off-by: Patrick Georgi <patrick@georgi.software> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41259 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-12nb/intel/sandybridge: Reorder IOSAV writesAngel Pons
We only write to the IOSAV LFSR registers twice, but we do so between the writes to the other four IOSAV per-subsequence registers. Since we know that the IOSAV is sleeping when we program the subsequences, we might as well do the two oddball LFSR register writes after we have programmed the always-written-to group of four registers. That way, subsequent changes can reproducibly replace the four writes with a single macro. Tested on Asus P8Z77-V LX2, still boots. Change-Id: If7bb14a9862a53a3eba565d17401347dcc9ffbe9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40973 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12nb/intel/sandybridge: Reorder register writeAngel Pons
Reorder the order of the operands in three register writes, so that replacing them with macros in a follow-up does not change the binary. Tested on Asus P8Z77-V LX2, still boots. Change-Id: I44aee9c0f49770586de322ee7f44c3609dbadd0b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40972 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12trogdor: Add support for rev1Julius Werner
This patch implements the pin changes needed for Trogdor rev1. Unfortunately, coreboot has to get the EC and TPM SPI busses compiled into Kconfig, so we cannot really build a single image that runs on both revisions. Introduce a Kconfig to handle this instead. Change-Id: I2e48dc4565682c12089b6cf92c29f4cef4d61bb8 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11sc7180: clock: Add support to bump CPU levelsTaniya Das
Add support to configure the Silver and L3 PLLs and switch the APSS GFMUX to use the PLL to speed up the boot cores. Tested: CPU speed frequency validated for speed bump Change-Id: Iafd3b618fb72e0e8cc8dd297e4a3e16b83550883 Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-05-11sc7180: Adjust memory allocations per upstream commentsT Michael Turney
Update memory regions, etc. Change-Id: If852fe4465fb431809570be6cdccff3ad9d9f4f0 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39362 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11trogdor: QCSDI loading depends on VB2_GBB_FLAG_RUNNING_FAFT setting flagAshwin Kumar
Change-Id: I63f35c94bc6c60934ace5fe0fd9176443059b354 Signed-off-by: Ashwin Kumar <ashk@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36518 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11trogdor: Latch GPIO interrupt supportrbokka
Required for TPM IRQ. Change-Id: I8198213cf2808be5291620892185b1e534263e3f Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38714 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11trogdor: mainboard reference all QUPv3 FW driversT Michael Turney
Change-Id: I8ff5dd63fac28ffa558aec71e79a6de87d7885e0 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37306 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11sc7180: Fix for hang during DMA transfer in SPI-NOR flash driversatya priya
Transfer sequence used by SPI-Flash application present in CB/DC. 1. Assert CS through GPIO 2. Data transfer through QSPI (involves construction of command descriptor for multiple read/write transfers) 3. De-assert CS through GPIO. With above sequence, in DMA mode we dont have the support for read transfers that are not preceded by write transfer in QSPI controller. Ex: "write read read read" sequence results in hang during DMA transfer, where as "write read write read" sequence has no issue. As we have application controlling CS through GPIO, we are making fragment bit "set" for all transfers, which keeps CS in asserted state although the ideal way to operate CS is through QSPI controller. Change-Id: Ia45ab793ad05861b88e99a320b1ee9f10707def7 Signed-off-by: satya priya <skakit@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39807 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11soc/amd/common/block/lpc: Reorganize LPC enable resourcesFurquan Shaikh
This change moves all the logic for setting up decode windows for LPC under configure_child_lpc_windows() which is called from lpc_enable_children_resources(). This is in preparation to configure decode windows for eSPI differently if mainboard decides to use eSPI instead of LPC. Side-effect of this change is that the IO decode registers are written after each child device resources are considered. BUG=b:154445472 Change-Id: Ib8275bc4ce51cd8afd390901ac723ce71c7a9148 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41070 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11soc/amd/common/block/lpc: Add config options for eSPIFurquan Shaikh
eSPI on Picasso is configured using the LPC bridge configuration registers. This change enables config options to allow SoC to select if it supports eSPI (SOC_AMD_COMMON_BLOCK_HAS_ESPI) and mainboard to select if it wants to use eSPI instead of LPC for talking to legacy devices and embedded controllers (SOC_AMD_COMMON_BLOCK_USE_ESPI). BUG=b:154445472 Change-Id: I15e9eb25706e09393c019eea4d61b66f17490be6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41069 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11LICENSES: Fix up retained copyright linesPatrick Georgi
One author put their name on a separate line from the rest of the Copyright statement, so copy it in. Change-Id: I041bc60079a238f59bb23556a80398052744fd5c Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41231 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11LICENSES: retain copyright noticesPatrick Georgi
BSD and MIT style licenses require to "retain" the copyright notice. LICENSES/retained-copyrights.txt serves that purpose and was generated using: git log -p $(git grep -l "SPDX.*\(BSD\|MIT\)") |egrep -i "^-.*(copyright|\(c\).*(19|20))" | sed -e 's,^[-/#* ]*,,g' |egrep -v "(Redistributions|DISCLAIMED|PROVIDED|LIABLE|Neither|BSD-style|above copyright notice|list of conditions)" |sort -u > LICENSES/retained-copyrights.txt Change-Id: I45142b4e6acc54aeb4c8918e0367fb48e6b11604 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41222 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11util/nvramtool: Remove license boiler plate from DISCLAIMER file, tooPatrick Georgi
Change-Id: I7ce0f08efaddb07a5d5f484d313068e5db3c7e2e Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41220 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11util/qualcomm/scripts: use SPDX headerPatrick Georgi
Change-Id: Ife2d84bac1973a10139db2a1489b7ea54360eee1 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41219 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11util/cbfstool: Add SPDX header to generated linux_trampoline code, tooPatrick Georgi
Change-Id: Id84244bb0c54326ea27be8801246fdeff039fb63 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41218 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11util: Use SPDX headersPatrick Georgi
Change-Id: I2858fdf74e782f425d56653491cdebe83c185d19 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-11soc/intel/quark: Revamp file headersPatrick Georgi
Remove license boiler plate in favor of SPDX headers. Where there's valuable additional information, fix up formatting. Change-Id: I801f27bd1a2b9defd5672a52c3a06eb1a12a9302 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41207 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 14:31:56 +0000