| Age | Commit message (Collapse) | Author |
|---|
|
This makes it so that we always log the generic "system boot" event.
If boot count support has not been implemented, fake it.
BUG=chrome-os-partner:28772
BRANCH=nyan
TEST=booted on Big, ran "mosys eventlog list" and saw
"System boot" event logged with boot count == 0
Original-Change-Id: I729e28feb94546acf6173e7b67990f5b29d02fc7
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/204525
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 2598dc63ddc0d76bcdf9814cadd4c75653fd9832)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ieb4e2e36870e97d9c5f88f0190291863a65a6351
Reviewed-on: http://review.coreboot.org/8142
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
- SPD GPIO table was changed from earlier builds and GPIO67 needs to be
swapped with GPIO69
- Hynix 8GB DRAM is actually x16 and needs updated geometry in the SPD
- Broadwell LPDDR3 at 1333 is not working in P2, remove the workaround
- In order to support both P2A and P2B with one firmware image we need
to read the EC board version and use the right SPD GPIO for bit3
- Touchpad I2C address changed to 0x4a/0x26
BUG=chrome-os-partner:29502
BRANCH=None
TEST=boot on P2A and P2B boards
Original-Change-Id: I4af4161449d904b8dd69c1c4f984b2f41f0dbbbc
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/204818
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 9cc71b68be556dab154fdf3f86914129e5f7a6dc)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ic5ca71dbfd9b9d413b86b2ae2786f39fd78ace1d
Reviewed-on: http://review.coreboot.org/8135
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This adds a block in the SMI handler to call init functions for
drivers which may be used in SMM. A static variable is used to
ensure the init functions are only called once.
BUG=chrome-os-partner:29580
BRANCH=mccloud
TEST=Built and booted on mccloud, system no longer hangs when
pressing power button at the dev mode screen. Also tested on parrot.
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I225f572f7b3072bec2bc06aac3fb50d90a2e30ee
Original-Reviewed-on: https://chromium-review.googlesource.com/204764
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 9315c485deb5f24df753e2d69f4819b2cb6accc2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8d2b21765c35c7ac7746986d5334dca17dcd6861
Reviewed-on: http://review.coreboot.org/8134
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Enable the ACPI Device for the EC ALS.
BUG=chrome-os-partner:24208
BRANCH=None
TEST=build and boot on samus, add acpi-als driver to the kernel
and read /sys/bus/iio/devices/iio:device0/in_illuminance_raw
Original-Change-Id: I9e957464f835d5bd96d4806f896ac60db9dea5dc
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/203744
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit a4f78b0b78c53bc0397d9a21dd8f3fa040f41616)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ib83d6211d323770c9498180a7721d45e4aefca9d
Reviewed-on: http://review.coreboot.org/8133
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The EC can export ALS information if the sensor is attached
to it directly rather than to the host. This adds a basic
ACPI ALS device and implements the required information.
The kernel does not use the _ALR tuple set but it is required
by the ACPI spec so this just adds the sample two point
response curve defined in ACPI 5.0 section 9.2.5.
The EC does not currently send events for lux value changes so
a polling interval of 1 second is defined.
BUG=chrome-os-partner:24208
BRANCH=None
TEST=build and boot on samus, add acpi-als driver to the kernel
and read /sys/bus/iio/devices/iio:device0/in_illuminance_raw
Original-Change-Id: Id29b72a68aa21c1a7c71d5f87223ac010cef0377
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/203743
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 81f44b33b87a6ee3079b8ef6efffacd0eeb0283f)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I5a0ccd30e8b453675beaf7d0363dbfa162bd5b3f
Reviewed-on: http://review.coreboot.org/8132
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
- RAM ID3 moved to GPIO65 to avoid Top Block Swap strap on GPIO66
- LTE_POWER_ON connection removed
BUG=chrome-os-partner:29502
BRANCH=None
TEST=none yet, preparing for new board
Original-Change-Id: I521fe963cbed57ef5f56cfb0e89aec50bfc48b21
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/203186
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 1eb65e058307a172f0af9c27d2d2d87d1b78c514)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ibf16dcfd83242c487232f34a310c9f6b2cb69314
Reviewed-on: http://review.coreboot.org/8131
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The current default memcpy first copies single bytes to align the
amount, then copies the rest as full words. In practice, the start of a
buffer is much more likely to be word-aligned then the end, and aligned
word access are usually more efficient. This patch reorders those
accesses to first copy as many full words as possible and then finish
the rest with byte accesses to optimize this common case.
This fixes a data abort when using USB on ARM without CONFIG_GPL. Due to
some limitations of how DMA memory is set up in coreboot on ARM, it
currently does not support unaligned accesses. (This could be fixed with
a more complicated patch, but it's usually not an issue... unless, of
course, your memcpy happens to be braindead).
Also add word-aligned accesses to memset and memcmp while I'm at it, and
make memcmp's return value standard's compliant.
BUG=chrome-os-partner:24957
TEST=Manual
Original-Change-Id: I2a7bcb35626a05a9a43fcfd99eb958b485d7622a
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/203547
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 05a64d2e107e1675cc3442e6dabe14a341e55673)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I0030ca8a203c97587b0da31a0a5e9e11b0be050f
Reviewed-on: http://review.coreboot.org/8126
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add stub implementation for gdb arm64 support. Currently all functions are kept
empty to enable proper compilation of depthcharge and libpayload. As we get more
clear about context management and stuff, we can add details for gdb as well.
BUG=None
BRANCH=None
TEST=Compiles successfully for rush
Original-Change-Id: I0a8729671ab0764d424c0e3d50af86433d05b1e8
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/204877
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit d24e5c26b56a9882b3450b1e4988b56c3d73efd1)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9b7d3d7060dd827ef4a46865e0f9a2b4e063d07d
Reviewed-on: http://review.coreboot.org/8125
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=None
BRANCH=None
TEST=Compiles successfully
Original-Change-Id: I2569cadf2d34f7211892f100ba715486d824b921
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/204611
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit dd9e06e41da043a48b469a011c010a10a1a3b25a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I37fbc8cfea0870e7167ffa47dd63fc548e18c82e
Reviewed-on: http://review.coreboot.org/8124
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Fix baseaddr typecast to allow use in 32- and 64-bit systems
BUG=None
BRANCH=None
TEST=Compiles successfully for rush
Original-Change-Id: Ie5ded744d75a0ae4d1428d04ff2478bdfe54d146
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/204424
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit b56814fe5fc7d3a2fdfb324d4baafb27a9d3ffd6)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Icedc1c819e39b92a0dd92e98f848e15b3039dfbe
Reviewed-on: http://review.coreboot.org/8123
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Correct function names to make them consistent with depthcharge calling
convention
BUG=None
BRANCH=None
TEST=Compiles successfully for rush
Original-Change-Id: I0fd8f7f929c3fe268710362d1fc19f9e15c4a23b
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/204423
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 36008e728b840d85bb98225c7bb1420b993181de)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I4b446da8f2c273385ee885c4870966e18ba2a7a6
Reviewed-on: http://review.coreboot.org/8122
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This is required for proper compilation of libpayload and depthcharge
BUG=None
BRANCH=None
TEST=libpayload compiles successfully for rush
Original-Change-Id: I305b58b978fd335e20abd7664c3ee2a6c1ea8384
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/204422
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit eef115c2371c6f7259bf808e0448f24a5b3491ab)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Icd6a5b8a0bdb125de4913fc82be8cb2a5aef5dc9
Reviewed-on: http://review.coreboot.org/8120
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch adds the ability to attach a GDB host through the UART to a
running payload. Libpayload implements a small stub that can parse and
respond to the GDB remote protocol and provide the required primitives
(reading/writing registers/memory, etc.) to allow GDB to control
execution.
The goal of this implementation is to be as small and uninvasive as
possible. It implements only the minimum amount of primitives required,
and relies on GDB's impressive workaround capabilities (such as
emulating breakpoints by temporarily replacing instructions) for the
more complicated features. This way, a relatively tiny amount of code on
the firmware side opens a vast range of capabilities to the user, not
just in debugging but also in remote-controlling the firmware to change
its behavior (e.g. through GDBs ability to modify variables and call
functions).
By default, a system with the REMOTEGDB Kconfig will only trap into GDB
when executing halt() (including the calls from die_if(), assert(), and
exception handlers). In addition, payloads can manually call gdb_enter()
if desired. It will print a final "Ready for GDB connection." on the
serial, detach the normal serial output driver and wait for the commands
that GDB starts sending on attach.
Based on original implementation by Gabe Black <gabeblack@chromium.org>.
BUG=chrome-os-partner:18390
TEST=Boot a GDB enabled image in recovery mode (or get it to hit a
halt()), close your terminal, execute '<toolchain>-gdb --symbols
/build/<board>/firmware/depthcharge_gdb/depthcharge.elf --directory
~/trunk/src/third_party/coreboot/payloads/libpayload --directory
~/trunk/src/platform/depthcharge --directory
~/trunk/src/platform/vboot_reference --ex "target remote
<cpu_uart_pty>"' and behold the magic.
(You can also SIGSTOP your terminal's parent shell and the terminal
itself, and SIGCONT them in reverse order after GDB exits. More
convenient wrapper tools to do all this automatically coming soon.)
Original-Change-Id: Ib440d1804126cdfdac4a8801f5015b4487e25269
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/202563
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 9c4a642c7be2faf122fef39bdfaddd64aec68b77)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9238b4eb19d3ab2c98e4e1c5946cd7d252ca3c3b
Reviewed-on: http://review.coreboot.org/8119
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There have been leaks of GPL code into libpayload for a while now, for
new features or improvements that require third party code with no
adequate alternative among BSD-licensed software. It seems silly and
counter-productive to keep holding back features and performance
improvements from libpayload for a use-case (proprietary payloads) that
doesn't even seem to be implemented anywhere to date. Open-source
payloads should not need to suffer to appease commercial ones.
Instead, this patch introduces a new Kconfig option to explicitly allow
inclusion of GPL code. It will use Kconfig dependencies and/or Makefile
rules to ensure that no GPL code can end up in the final payload if that
option is unset, allowing proprietary payloads to keep working with the
existing BSD-licensed feature set. New features and patches (that are
sufficiently separate and self-contained to allow guarding through this
config option) can choose whether to import GPL code, and need to depend
on this option if they do.
Also clean up all (known) existing uses of GPL code to depend on the new
option, add some recent third-party imports to the LICENSES file, and
relicense the selfboot.c files to BSD with permission of the author.
BUG=chrome-os-partner:24957
TEST=Compiled Falco and Nyan_Big both with and without the new option,
disassembled output binaries to ensure that memcpy() looks as expected.
Original-Change-Id: I6e3a75b1a8e46291c75a876844c7a01f7d3f2a0e
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/203513
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit d8e5a9fdf583b5ac861f34baea6a16c4d8536512)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I446fef028264c793b946dd9f765e446bf708b4db
Reviewed-on: http://review.coreboot.org/8118
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch makes some slight changes to the exception hook interface.
The old code provides a different handler hook for every exception
type... however, in practice all those hook functions often need to look
very similar, so this creates more boilerplate than it removes. The new
interface just allows for a single hook with the exception type passed
as an argument, and the consumer can signal whether the exception was
handled through the return value. (Right now this still only supports
one consumer, but it could easily be extended to walk through a list of
hooks if the need arises.)
Also move the excepton state from an argument to a global. This avoids a
lot of boilerplate since some consumers need to change the state from
many places, so they would have to pass the same pointer around many
times. It also removes the false suggestion that the exception state was
not global and you could have multiple copies of it (which the exception
core doesn't support for any architecture).
On the ARM side, the exception state is separated from the exception
stack for easier access. (This requires some assembly changes, and I
threw in a few comments and corrected the immediate sigils from '$' to
the official '#' while I'm there.) Since the exception state is now both
stored and loaded through an indirection pointer, this allows for some
very limited reentrance (you could point it to a different struct while
handling an exception, and while you still won't be able to return to
the outer-level exception from there, you could at least swap out the
pointer and return back to System Mode in one go).
BUG=chrome-os-partner:18390
TEST=Made sure normal exceptions still get dumped correctly on both
archs.
Original-Change-Id: I5d9a934fab7c14ccb2c9d7ee4b3465c825521fa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/202562
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 97542110f0b385b9b8d89675866e65db8ca32aeb)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
*** Squashed to prevent build failures. ***
libpayload: align arm64 with new exception handling model
The exception handling was previously updated, however the
arm64 changes raced with hat one. Make the arm64 align with
the new model. Without these changes compilation will fail.
BUG=None
BRANCH=None
TEST=Can build libpayload for rush.
Original-Change-Id: I320b39a57b985d1f87446ea7757955664f8dba8f
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/204402
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 0080df41b311ef20f9214b386fa4e38ee54aa1a1)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9a0bb3848cf5286f9f4bb08172a9f4a15278348e
Reviewed-on: http://review.coreboot.org/8117
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch adds a console_kill_output_driver() function, which can
remove a previously registered output driver. This is mostly useful when
you overlay some output channel over another, such as when the GDB stub
takes direct control of the UART (and thus has to get rid of the
existing serial output driver).
BUG=chrome-os-partner:18390
TEST=None
Original-Change-Id: I6fce95c22fd15cd321ca6b2d6fbc4e3902b1eac3
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/202561
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 87680a246429d24e99b7b477b743c357f73b752c)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I50001cee4582c962ceedc215d59238867a6ae95a
Reviewed-on: http://review.coreboot.org/8116
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Basic support for arm64 is enabled in libpayload.
Features added:
1) mem* operations in assembly.
2) Basic exception handling and support for testing exceptions.
3) Caching support.
Tested with arm64-generic board compilation.
BUG=None
BRANCH=None
TEST=Compilation successful
Original-Change-Id: I4e86301f9c6383abc078e2b70071fb84bd6e4741
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/187067
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit a70d13f3d225535843ab352290eab2e1ec7a9b4b)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ie3affe6a2bdd4fed3058de739d4c6aa573e5b251
Reviewed-on: http://review.coreboot.org/8063
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This marks the bottom chunk of memory, which is used by various IP
blocks, as reserved so that Depthcharge does not attempt to wipe it.
BUG=chrome-os-partner:30067
BRANCH=storm
TEST=Built and booted for storm, depthcharge shows:
Wipe memory regions:
[0x00000041500000, 0x00000051000000)
[0x000000510006a0, 0x00000053000000)
[0x00000054141260, 0x0000007fffd000)
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I8f782f16d13620b705e1b3fbeca21dc8705b7e77
Original-Reviewed-on: https://chromium-review.googlesource.com/206516
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit f66f553f1594c481a74b7f40b4b1088600b1a70a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I82d118abc86052f5e32f6195a4efd04fe315be5a
Reviewed-on: http://review.coreboot.org/8149
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
BUG=chrome-os-partner:29871
BRANCH=storm
TEST=builds and boots (sort of)
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I82e1792152d17d689e129c9941e8972221bde366
Original-Reviewed-on: https://chromium-review.googlesource.com/206011
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 8995fde9bdfb8af8fb86525fd67a61614881f78e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ice4a5382903b0ab6e085c39d05c46601373080eb
Reviewed-on: http://review.coreboot.org/8148
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The actual storm device has a single USB interface, which needs to be
explicitly turned on using GPIO51.
BUG=chrome-os-partner:29871
TEST=verified that depthcharge finds and boots a kernel from USB stick
Original-Change-Id: Iaf868812c96e1e3289b9403855c4cc8f87c1e368
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/205329
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org>
(cherry picked from commit aa22376ffac22309a298dfa844e7f61c97d57d3e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ic0f34622e61a65a0540c0f3fca26fb057fa85fb7
Reviewed-on: http://review.coreboot.org/8147
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Storm devices use more recent Spansion flash, add its description to
the table of supported devices.
BUG=chrome-os-partner:29871
TEST=the updated firmware boots all the way to depthcharge
Original-Change-Id: I81661c01ae679d49918e40d940b8d348f3081f9a
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/205182
Original-Reviewed-by: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit ea7bb1cf65b7130164b869fef09c55138100206b)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I1e0136a5c575951b4e464aab0f380f19e886a84f
Reviewed-on: http://review.coreboot.org/8146
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Because we had no stack on romcc boards, we had a separate, not as
powerful clone of printk: print_*.
Back in the day, like more than half a decade ago, we migrated a lot
of boards to printk, but we never cleaned up the existing code to be
consistent. Instead, we worked around the problem with a very messy
console.h (nowadays the mess is hidden in romstage_console.c and
early_print.h)
This patch cleans up the generic code pieces to use printk() on all
non-ROMCC boards.
Our two remaining ROMCC boards are fixed up in this commit:
bifferos/bifferboard and dmp/vortex86ex.
Change-Id: I16676eeabe5c892c8e3c9f3c0cd3bae2e8fd74b6
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8115
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Andrew Wu <arw@dmp.com.tw>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
- Remove @param command for #define - this isn't valid.
- Rename duplicate @section names - All of the renamed @sections
have other @section names in the same file.
- Remove blank @brief and @param commands - Doxygen seems to REALLY
dislike this...
- Add a missing @param name.
Change-Id: Iba99ec68b37bbb5c375b7256363d16228031d771
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8175
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
- Join doxygen file command with the file description
- Give extended file location so doxygen knows which early_sbmus.h
the file is. (I don't get this either, but it fixes the warning)
Change-Id: Ia91fb1ac1e9687e1a5a5cb5234696b3c24d4cd24
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8174
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Take unused reverse eng function out of build by wrapping in #if 0.
Change-Id: I816b3ea08a8858fc03e4455c1d7711265e63cba4
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8167
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Remove 'read_mchbar8_bypass()' as 'read_mchbar8()' does the same
thing and 'read_mchbar8_bypass()' is unused.
Change-Id: I0dc2325e6205c38b63e5200c408ece65e4f938dc
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8166
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This convenience API was never used.
Change-Id: If2a99967e7f8c02e9029f7766aeef1e1a1f3dd16
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8108
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Ide09e129fd9400eb20f9b7bb3cd0e5d6d271e372
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/8176
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Missing base may have enabled SMI for all GPI inputs.
Change-Id: I1157afaccccb17d325a4efdb1f270a27f9a299ab
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8169
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
- @todo has to be lowercase for doxygen
- Fix some parameters that had changed in the code.
- The @file entries needed to be more specific.
Change-Id: Icdce08735f581609cd25cce41e986c71435368a4
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8154
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This is a doxygen target I'm using for cleaning up the coreboot doxygen
output. It runs in about a minute instead of.... a lot longer, and
only generates documentation for the coreboot/src directory, excluding
vendorcode.
It was requested that the comments be stripped to make it easier to
read. This was done through the following command (split for gerrit):
head -n 1 Doxyfile.coreboot_simple > Doxyfile.tmp ;
cat Doxyfile.coreboot_simple | sed 's|^\s*#.*$||' | sed '/^$/d' | sed 's|[[:space:]]\+$||' >> Doxyfile.tmp ;
mv Doxyfile.tmp Doxyfile.coreboot_simple
I'm including the command here because any time the file is updated
with the doxygen wizard, it will need to be run again. It might be
desirable to turn this into a script in the documentation directory.
Change-Id: Ic0cbbcd21aa647e80a037481546bdcd2aab8949e
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8068
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
- Add missing parameter names in several files
- remove parameter types in several files
- remove lines from doxygen documentation. These should be outside the
doxygen comments.
- Some of the comments shouldn't have been doxygen style. Turn these
into regular non-doxygen comments.
Change-Id: Ieccfe237385efee007b48308d58eb0a6a12f5bfa
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8153
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I3bb5dc23885af8c992456ee5e4bd374cd4b813bf
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/8049
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Remove useless comment pretaining to abusing pragma's for old
GCC/GDB interaction issues.
Change-Id: Ic83a0285ac947a23699a81a82b89de08a47ab052
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8017
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This file will have CBMEM init hooks API one day.
Change-Id: I0c31495d4217a5eb235b13e6d8e8c99a87a3b840
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8031
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Because we had no stack on romcc boards, we had a separate, not as
powerful clone of printk: print_*. Back in the day, like more than
half a decade ago, we migrated a lot of boards to printk, but we never
cleaned up the existing code to be consistent. instead, we worked around
the problem with a very messy console.h (nowadays the mess is hidden in
romstage_console.c and early_print.h)
This patch cleans up the mainboard code to use printk() on all non-ROMCC
boards.
Change-Id: I2383f24343fc2041fef4af65d717d754ad58425e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8111
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Because we had no stack on romcc boards, we had a separate, not as
powerful clone of printk: print_*. Back in the day, like more than
half a decade ago, we migrated a lot of boards to printk, but we never
cleaned up the existing code to be consistent. instead, we worked around
the problem with a very messy console.h (nowadays the mess is hidden in
romstage_console.c and early_print.h)
This patch cleans up the cpu code to use printk() on all non-ROMCC
boards.
Change-Id: I233c53300f9a74bce4b828fc4074501a77f7b593
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8114
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Because we had no stack on romcc boards, we had a separate, not as
powerful clone of printk: print_*. Back in the day, like more than
half a decade ago, we migrated a lot of boards to printk, but we never
cleaned up the existing code to be consistent. instead, we worked around
the problem with a very messy console.h (nowadays the mess is hidden in
romstage_console.c and early_print.h)
This patch cleans up the southbridge code to use printk() on all non-ROMCC
boards.
Change-Id: I312406257e66bbdc3940e206b5256460559a2c98
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8110
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Because we had no stack on romcc boards, we had a separate, not as
powerful clone of printk: print_*. Back in the day, like more than
half a decade ago, we migrated a lot of boards to printk, but we never
cleaned up the existing code to be consistent. instead, we worked around
the problem with a very messy console.h (nowadays the mess is hidden in
romstage_console.c and early_print.h)
This patch cleans up the northbridge code to use printk() on all non-ROMCC
boards.
Change-Id: I4a36cd965c58aae65d74ce1e697dc0d0f58f47a1
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/7856
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Because we had no stack on romcc boards, we had a separate, not as
powerful clone of printk: print_*. Back in the day, like more than
half a decade ago, we migrated a lot of boards to printk, but we never
cleaned up the existing code to be consistent. instead, we worked around
the problem with a very messy console.h (nowadays the mess is hidden in
romstage_console.c and early_print.h)
This patch cleans up the superio code to use printk() on all non-ROMCC
boards.
Change-Id: I23fc307f1346cdb7adaaeccfafe17d9205e909ac
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8113
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
This code is unused, and the same functionality is in superiotool
already.
Change-Id: I7bf667e2e2bfc8fdedcdbe09bf420abf47b1ee97
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8112
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
console_tx_byte() is defined in stream.h, not console.h. This will cause
problems later, when untangling more ROMCC and console code. Hence, fix
the issue beforehand.
Change-Id: If4e04bd6c69b630912414676950157d06c364d74
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8121
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
It's unused.
Change-Id: Iad3e7aa0f777392c9d65b9fcdd3c1666af31723a
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/7883
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This adds a UART driver for the ipq8064 controller. It still does not
quite work in the receive direction - the receive FIFO returns read
data in 32 bit chunks, which means that 4 keys need to be pressed
before a character pops out of the driver (and it reports it as a
single character).
This issue is being addressed separately, the driver is being checked
in to facilitate concurrent development.
BUG=chrome-os-partner:27784, chrome-os-partner:29313
TEST=with deptcharge modifications in place, the AP148 board comes up
to the depthcharge prompt:
Starting depthcharge on storm...
Original-Change-Id: Ief2cfcca73494be5c4147881144470078adcefb8
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/202045
Original-Reviewed-by: Deepa Dinamani <deepad@codeaurora.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 4499318fb9a4e663c504d7c41380ccf2aa89da29)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I3e07d7568c20c0e570222971ff219de3a6d9b7cc
Reviewed-on: http://review.coreboot.org/8061
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Some drivers being ported to depthcharge use io bit manipulation
macros. The libpayload include file seems the most appropriate place
to keep these macros in. There is no common io.h file across
architectures, the x86 version could be added later if required.
BUG=chrome-os-partner:27784
TEST=observed ipq806x SPI driver deptcharge port (WIP) compile properly.
Original-Change-Id: I33f3be072faefce293c871f7e3bc3b2e6bc38ffe
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/202559
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org>
(cherry picked from commit ad18a605b4d0ec3251c1614e7358b42aa6b5c45a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8656e12af20ce4cf11d771942e8fe7d4eb2a560d
Reviewed-on: http://review.coreboot.org/8062
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This adds some assembly code to clear .bss segment. It might have been
already cleared by the loader, but it is not guaranteed. This also
helps when the program is loaded by the debugger.
BUG=none
TEST=observed that .bss is now initialized when the program is
restarted. Verified correct boundaries of the segment.
Original-Change-Id: I0aed0070da53881e4cf8c27049459040c006e765
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/201784
Original-Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org>
(cherry picked from commit c89ecee5ddfc33a438d4d1926d3756a48f3c2576)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ic0c33d2a8ad22cd23b3ccb73c603cb14ae2aab29
Reviewed-on: http://review.coreboot.org/8060
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This reverts commit 9270553fff23462fcb298f154296319bf3639d15.
Change-Id: I195f721ce7a18aac6c1aa6f4e0f9284455d531b0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8138
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Somewhere along the line, the sb_cfg parameter name was changed to
config, but this wasn't carried into the documentation or the function
prototypes everywhere.
Change-Id: Iccb0829c2f50370dddb70af915a6759316c4727a
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/8098
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Doxygen gives an error when processing #defines inside doxygen comments.
Normal comments are ignored. The choice for this fix was to make this
a standard comment starting with '/*' instead of '/**', or to make the
comment not a #define.
Change-Id: I97fbbcea6f045d80ec7c0ab5e196d57e5da16d86
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/8099
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
These files were trying to document the parameters, but didn't have
the syntax quite right. Change the comments from @varname to
@param varname as required by doxygen.
Change-Id: I63662094d3f1686e3e35b61925b580eb06e72e28
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/8100
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Remove variable types from the param declaration.
Change-Id: Ia6a3d36fcf01d7a52bb1a31cfdb47d88bf612d79
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/8097
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
The doxygen parameter names in the comments no longer matched the
functions they were attached to. Doxygen complains about extra
parameter comments and uncommented parameters in the functions.
Change-Id: I21b8a951f8d8d04b07c3779000eeaf1e69fed463
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/8101
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
These comments are left over and are not relevent in the coreboot
code, but created a new section titled "Release Content" in the
doxygen documentation produced by the coreboot code. In an effort
to clean up the output, I'm removing these doxygen comments.
Change-Id: I4d7be3313a2ab6c140b4f3afe70dffc4abba7bca
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/8069
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The FSP uses a lot of UEFI HOB (Hand Off Block) functions for reporting
and passing information to coreboot. These seem to me like they should
be in their own file, so I'm splitting them out of fsp_util.c. I'll
be adding a couple more functions in the next patch.
These functions should all be compliant to the Hand Off Block spec.
Change-Id: Ie8bbc0a9277b9484f13dd077b3a52e424a8600fe
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/8065
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Re-factor to_flash_offset() into 'spi_flash.h' header. Motivated by
Clang complaining that the function 'to_flash_offset' is unused.
Change-Id: Ic75fd2fb4edc5e434c199ebd10c7384d197e0c63
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7519
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
As `#ifndef` and not `#if` is used in the check for
include guards, setting it to 1 is not needed.
Change-Id: Iaa6c0f807b9e99ad3c9551abe4ab1627e5505d67
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8103
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: build bot (Jenkins)
|
|
Use 'delay.h' header rather than directly including 'delay.c'
source. N.B. Some amdfam10 and K8 boards are not included in
this changeset since unrelated issues are woven in there.
Change-Id: Ibc0c0e560d8eedaf5c3150f95ba72fe5dd8d6f3a
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8086
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Fix system include paths to be consistent. Chipset support is
part of the Coreboot 'system' and hence 'non-local' (i.e., in
the same directory or context). One possible product of this, is
to perhaps allow future work to do pre-compiled headers (PCH) on
the buildbot for faster build times. However, this currently just
makes mainboard's consistent.
Change-Id: I2f3fd8a3d7864926461c960ca619bff635d7dea5
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8085
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Provide proper Makefile and Kconfig components so
that this superio is built as object code. Select
superio component in mainboard Kconfig's to bring
in the link-time symbols and thereby removing the
need for .c inclusion.
N.B. The LPC47N207 Super I/O does not physically exist
on these boards. The Super I/O is found on external LPC
debug card hardware and so should really be made selectable.
However, this is beyond the scope of this specific fix, that
rids us of .c inclusions in romstage.c
Change-Id: I451c3a81c4b5beca1ed65e27467a7393d2521dae
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8084
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Cherry-pick from chromium and adjusted for added boards
and changed directory layout for arch/arm.
Timestamp implementation for ARMv7
Abstract the use of rdtsc() and make the timestamps
uint64_t in the generic code.
The ARM implementation uses the monotonic timer.
Original-Signed-off-by: Stefan Reinauer <reinauer@google.com>
BRANCH=none
BUG=chrome-os-partner:18637
TEST=See cbmem print timestamps
Original-Change-Id: Id377ba570094c44e6895ae75f8d6578c8865ea62
Original-Reviewed-on: https://gerrit.chromium.org/gerrit/63793
(cherry-picked from commit cc1a75e059020a39146e25b9198b0d58aa03924c)
Change-Id: Ic51fb78ddd05ba81906d9c3b35043fa14fbbed75
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8020
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The hp/abm board is used in network/server applications.
Notes:
- The hp/abm board is headless and therefore does not define
CONFIG_GFXUMA, and does not require a video bios.
- The micro USB connector on the board edge is connected to COM4
(i.e. I/O=2E8h). Coreboot needs to be configured to use Index=3.
- If you are using SeaBIOS it would also need to be configured to
use the UART at I/O=2E8h.
- This board has been tested with headless installed versions of
Ubuntu 12.10 and Fedora 19.
Change-Id: I60bde98411c40a184c8d053199bac8d04df8ab07
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6116
Tested-by: build bot (Jenkins)
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
|
|
Change-Id: I8dcb3912976d7381421dc41ee30e7c7652e6c28a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6115
Tested-by: build bot (Jenkins)
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
|
|
This is just bit-rotting and its likely this will continue to rot
by the time someone notices it exits it will be too late (i.e., today).
Change-Id: I40ef2cd8e3d563079b086f51dabab0960a0a13b3
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8087
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
- Remove types from the param declarations.
- list needed to be uppercase.
Change-Id: I8b9ed78908e5d3e1d99e7ba2ea9013be109b8e27
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/8072
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
Remove PeiServices param for OemInitEarly - it doesn't exist in the
function.
Change-Id: I338aeb4128126f6e541815dc09bf8d23678081c8
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/8073
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
- Move @def BIOS_SIZE description to the next line
- SB_GEN2 changed to SB_GPP_GEN2
- Move the SIO_HWM_BASE_ADDRESS description to the next line
Change-Id: Ia3496b0108484f557627304553461932a100dfa5
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/8071
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Correct the param to match the functions.
Change-Id: Id002c549a6ba6a7be4fa5eee396769eaa2510698
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/8074
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
- @v & @i need to be @param v & @param i
- add the @file command
Change-Id: Ib4fb609629bc2dfcf1869bdf7a4d4cd9fea283cc
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/8075
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
This doxygen directive was creating a top level modules section, which
had the vx900_int15 code as its only member. I do think that breaking
the code into documented sections is a good plan, but in an effort to
clean up the output, I'm removing this for now.
Change-Id: I3f7e2f704136ebbd1961c5946bac4c2edbd6a371
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/8070
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The doxygen output looks better with the coreboot logo,
so I'm adding the 2k png from the wiki to the documentation
directory to use in the doxygen build.
Change-Id: I95ca67fb311e0b39a12ad9c5a1a53a99f7fec2d9
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/8067
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Remove dead debug code, we have superiotool for this reason.
Restructure file to be consistent with other superio's thereby
avoiding forward declarations of functions.
Change-Id: I44272b4e30a2bc8c3a719df17b837432cd38429c
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8083
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Remove dead debug code, we have superiotool for this reason.
Restructure file to be consistent with other superio's thereby
avoiding forward declarations of functions.
Change-Id: Ief60d3f54c508cbb7795b284b59710d2c0e3018b
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8082
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Id3d5f2a120c0a933c031102f206829305da20f0c
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8081
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I4a3639c05231eacd016ec3873330f9844befd448
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8080
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I344f2a8d2ae5f6f3fa04d79773ee1c59de69e425
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8079
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I2efb7ab4b69bcd127b2faf54277dc229c9dcf3ea
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8078
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Id156ca3c9a14c5bcc4d6cdb8434ca8efdac3139a
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8077
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Ia45bc7a880d0dab57c56a0452858cd26626f09df
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8076
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I83db9b189e672b0e1f25bc42b73639c375bea3e5
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8054
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Id6d9efc93fdaff63dcaab50712ac9be35ccb42a7
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8053
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This brings mainboard up to being consistent tree-wide now for
all superio header path inclusions.
Change-Id: I00a806ce209ba363c62e3ddd49db9bf599f32149
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/8052
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This explicitly casts CONFIG_SYS_SDRAM_BASE to an unsigned type so
we don't get compilation errors when increasing CONFIG_DRAM_SIZE_MB.
BUG=chrome-os-partner:29871
BRANCH=storm
TEST=compilation no longer fails with DRAM_SIZE set to 1024
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I9717c39d87682d43ec4e7a4042d9b559a1d7eedb
Original-Reviewed-on: https://chromium-review.googlesource.com/206010
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 178db896346ae8cbc5ddec5373a83688f32c62ba)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I68c11d398820684ad928bdfdd74f7a6885247333
Reviewed-on: http://review.coreboot.org/8059
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Libpayload libc requires timer clock frequency to be at least 1MHz.
Ipq8064 code presently provides a single option of 32kHz. Pretend to
be running at 1 MHz without additional accuracy.
This is a hack which will be reverted as soon as the SOC is configured
to supply a faster running clock.
BUG=chrome-os-partner:27784, chrome-os-partner:28880
TEST=with other changes depthcharge boots to the CLI console
Original-Change-Id: I80ec6652bc5693a549668cd6e824e9cf5c26b182
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/201342
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 466a59967b13986099106f8b44924648c1e6e6cd)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I113689191db70710e7a45ccd02d672f482343e35
Reviewed-on: http://review.coreboot.org/8004
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
The earlier compilation warning fix (chromium 7e4aa17) incorrectly
assumed that selfboot() is a function defined in the cbfs driver.
This is a commonly available function, it should not come from cbfs.h.
BUG=none
TEST=the following build command succeeds:
rambi storm nyan_big
Original-Change-Id: I3ef49d849168ad9dc24589cbd9ce7382052345bd
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/201386
(cherry picked from commit d5090e8410530f41b9fd33e2caa1d8aa25438105)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8404fb52112b391982f954a6d06fe4b451dfcb8a
Reviewed-on: http://review.coreboot.org/8003
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
When the IPQ SPI driver was ported to coreboot, a few GPIO related
definitions ended up in a wrong include file. Move them to the proper
place and get rid of duplicated definition of GPIO_OUT.
BUG=chrome-os-partner:27784, chrome-os-partner:29871
TEST=proto0 still boots with the new firmware
Original-Change-Id: I4b06067a71c85efaf0e48f29e232f83fd1f725a8
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/205328
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org>
(cherry picked from commit df73bb0023f5eaf5594ef41b3632c4402ebf126c)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I109e62e3bfc9bd15640ff697be7634f42435a3e4
Reviewed-on: http://review.coreboot.org/8058
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Depthcharge clears up all unused DRAM before starting Linux, and does
not know the translation table location. Instead of adding an
exclusion term to the memory wipe descriptor let's move the table to
the top of IMEM, it is also likely to be a good location in the
future, when EFS is introduced.
BUG=chrome-os-partner:27782
TEST=manual
. built and ran firmware on ap148
Original-Change-Id: I76546438d243076dda4d0eb3f784e0b5a8a1fa22
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/203624
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 4250f8574d6cc0bbec5ba0411f22d801f034afb8)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I12cd74e3d318b878e7703414a7ddaaed0812cb7a
Reviewed-on: http://review.coreboot.org/8057
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
This patch adds code to initialize the two DWC3 USB host controllers and
their associated PHYs to the IPQ806x SoC (closely imitating the existing
DWC3 implementation for Exynos5), and uses them to initialize USB on the
Storm mainboard.
BUG=chrome-os-partner:29375
TEST=Hack up netboot to get around missing SPI flash, load a file over
TFTP. Hack a storage read into the storage attach function, dump the
data and confirm that it looks right. Enable USB debugging and confirm
3.0 devices get enumerated at SuperSpeed (mostly).
Original-Change-Id: Iaf7b96bef994081ca222b7de9d8e8c49751d3f1d
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/202157
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
(cherry picked from commit 6349e7281d5accb1247acb0537a48fa3a5e1bf97)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I749d265d45c6a807a7559bd4df2490a6eb8067af
Reviewed-on: http://review.coreboot.org/8056
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Hynix 2GB/4GB configs have been fine-tuned.
Kingston 2GB config is new, uses RAMCODE 0x6.
BUG=none
TEST=emerge-nyan_big coreboot-nyan_big OK. Flashed to my
Big 2GB system (PVT1/SKU1) and it booted OK.
BRANCH=nyan_big
Original-Change-Id: I8a23a5568ef84d5befc13623f78bce664130f314
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/203305
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit e47d18d8cff50f46d0a14715b6750f7aa6d0da82)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I363db37d6a63d9f5c578e68a0149259657e1ebfd
Reviewed-on: http://review.coreboot.org/8045
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
For some panels, the plld can't provide the pixel clock that
the panels wants, so we give it a good enough one. And we
should calculate the dp/dc settings by the real pixel clock.
BRANCH=nyan
BUG=chrome-os-partner:29489
TEST=Verified the panels N116BGE-EA2(Nyan) and N133BGE-EAB(Big).
No screen flicker is observed. No sor dp fifo underflow found.
Original-Change-Id: I037b2bd5f5e9bb8b15ab6f47a84ac7ef2e207779
Original-Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/203358
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit d320f0c6b54ea8ca84206447b223da76ac5f771b)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I772bb8e7a40cc462c72ba0fb9657c63ed2e0d0ac
Reviewed-on: http://review.coreboot.org/8044
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add XN/PXN bits to prevent cpu from fetching speculative instructions
on noncacheable region.
BUG=chrome-os-partner:28568
BRANCH=nyan
TEST=Build and run reboot tests on nyan_big
Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Change-Id: I0cd2ad5a47a467ef609d30d42cd300b5ca45b77b
Original-Reviewed-on: https://chromium-review.googlesource.com/203447
Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Commit-Queue: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit c3d585bdfcbe9330e5c6f51d1fcf45aec9f26755)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Icf552e2f1ba20255915b24b4f96a179a2e7d08fe
Reviewed-on: http://review.coreboot.org/8043
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
CrOS devices with Chromeos EC need only use hostevent to communicate
recovery assertion to the BIOS. This CL removes wired GPIO from
determining recovery as it appears under certain conditions (cold
reset) the internal PU on the AP isn't strong enough and therefore the
value is sometimes seen as asserted.
BRANCH=none
BUG=chrome-os-partner:29333
TEST=compiles & BIOS no longer responds to rec_mode GPIO during boot.
Original-Change-Id: Ib220cfa5f5bfe7193d555bfd32c0444b063d00f2
Original-Signed-off-by: Todd Broch <tbroch@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/202996
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
(cherry picked from commit d9927bcd67b0fb069fde231314e654d727092282)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I6e086cbabc884f18deb2791a0f897e332b31032f
Reviewed-on: http://review.coreboot.org/8042
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This is still using the 32kHz timer coreboot uses. A finer granularity
timer implementation for 806x is in the works.
BUG=chrome-os-partner:27784,chrome-os-partner:28880
TEST=none yet.
Original-Change-Id: Iae206749000d45040090df48199c8d86d76bbae5
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/198021
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 8f49f752ab8f84b7c5dc189238732360e8d2aae2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia150c974e5b66939de0b007cf7c1308c187f3289
Reviewed-on: http://review.coreboot.org/8002
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
- Put SSD into reset on transition to S3/S5 to prevent leakage
- Fix GPIO number for wlan disable used in smihandler
- Enable generic hub driver in libpayload
- Fix comment in devicetree about S0ix
BUG=chrome-os-partner:28502
BRANCH=None
TEST=Build and boot on samus
Original-Change-Id: Idce566d0f22622d36697be54ab51cacb576c5d6d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/203185
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit c0dd822babee3d766eff1735687d14e63380f702)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Idc2da99fce817aaf893f031ffbb4ac4a2ade31b0
Reviewed-on: http://review.coreboot.org/8048
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
XHCI driver was not enabled in libpayload and some ports were
disabled that should be enabled.
The Chrome OS GPIOs also need to be reported as 0xFFFFFFFF to
properly indicate unused so crossystem does not attempt to
export GPIO number 255 in the kernel and trigger a warning.
BUG=chrome-os-partner:28234
TEST=Build and boot on wtm2
Original-Change-Id: Ib5727ef6e618c959640b200757cfa13f95c7cb0f
Original-CSigned-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-CReviewed-on: https://chromium-review.googlesource.com/203184
Original-CReviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 328362469b00c9467908a7d18a031fee73753def)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I91ef865c44d3c73b0d74c9eaf1fbf2fb5e894434
Reviewed-on: http://review.coreboot.org/8047
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Both DDI ports may be used on this board so it needs to be
able to detect a device on either port.
BUG=chrome-os-partner:28234
TEST=None (needs hardware)
Original-Change-Id: I5fc5ec3fe887fb51e7bdeae43c8297580e0ba6d6
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/202358
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 574bb6ac5d33c98f0214d6c738af24172164f4a1)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I57613fcea10af0fecaf0f2ad6a83ca011c650099
Reviewed-on: http://review.coreboot.org/8046
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
- Update GPIO map
- Update SPD for new memory and 4-bit table decode
- Enable USB3 port 3 and 4 (shared with PCIe port 1)
- Enable PCIe port 3 and disable port 1
- Enable SerialIO ACPI mode for devices
- Disable S0ix for now to prevent use of C10
- Special handling for memory with broadwell CPU
BUG=chrome-os-partner:28234
TEST=Boot on P1.9
Original-Change-Id: If6adcc2ea76f1af7613b715133483d7661e94dd8
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/201083
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 35835eaed3e098597e46f602fbd646cfbb899355)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Icb03808da6d92705bbc411d155c25de57c4409c6
Reviewed-on: http://review.coreboot.org/8007
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Put all the SPD related information in one place including
the onboard SPD sources and the board specific parsing.
BUG=chrome-os-partner:28234
TEST=Build and boot on samus
Original-Change-Id: If5cd826ecc9cc856008b7c29aa3cfade5ae7f685
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/201082
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit f40e447cee84ebd04ab8a57250d0f56f508d52f2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9c10b08c3e640642e3c75696a233051bb34a2123
Reviewed-on: http://review.coreboot.org/8006
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Convert wtm2 board to use the broadwell soc chipset.
BUG=chrome-os-partner:28234
TEST=Build and boot on wtm2 with haswell and broadwell
CQ-DEPEND=CL:201067
CQ-DEPEND=CL:*164226
Original-Change-Id: Ifb0db15cc23a3b66430b32b2ad3f8ab2fb03c4c3
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/201070
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit e1073c6e34ab2d436faf46dde5f6b3bf99692866)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I925b91a8de980b1768f03eaee915a7fd91fbdbda
Reviewed-on: http://review.coreboot.org/8001
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Ibeaf6de9505bc6f1e7358a4cfc80228dff7ddb69
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Found-by: Coverity Scan
Reviewed-on: http://review.coreboot.org/7978
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
With commands typically shorter than the buffer they're
copied to, copy cmdlen bytes, cut off by the buffer limit.
Change-Id: Ia9d2663bd145eff4538084ac1ef8850cfbcea924
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Found-by: Coverity Scan
Reviewed-on: http://review.coreboot.org/7977
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
