summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-20mb/google/hatch: Fix Puff variants rom size from 32768 -> 16384 KBEdward O'Callaghan
Originally variants make use of a 32MB chip whereas now they use a 16MB SPI flash. Allow for the coordination of dealing with the transition between phases. V.2: Leave Puff alone at the moment due to the complexity of coordination. BUG=b:153682192 BRANCH=none TEST=none Change-Id: Ic336168ea1a0055c30f718f5540209d2cf69d029 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40897 Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20soc/intel/broadwell: Mask lower 20 bits of TOLUD and TOLM in systemagent.aslFurquan Shaikh
Lower 20bits of TOLUD and TOLM registers include 19 reserved bits and 1 lock bit. If lock bit is set, then systemagent.asl would end up reporting the base address of low MMIO incorrectly i.e. off by 1. This change masks the lower 20 bits of TOLUD and TOM registers when exposing it in the ACPI tables to ensure that the base address of low MMIO region is reported correctly. Change-Id: I11b3ef8deda21930998471ab6e712da4c62f5b02 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41471 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-20soc/intel/broadwell: Update systemagent.asl to ASL2.0 syntaxFurquan Shaikh
This change updates systemagent.asl to use ASL2.0 syntax. This increases the readability of the ASL code. TEST=Verified using --timeless option to abuild that the resulting coreboot.rom is same as without the ASL2.0 syntax changes for auron. Change-Id: I479bb6cb7ed4c9265325c7c8621f03454f21f467 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-20soc/intel/skylake: Mask lower 20 bits of TOLUD and TOLM in systemagent.aslFurquan Shaikh
Lower 20bits of TOLUD and TOLM registers include 19 reserved bits and 1 lock bit. If lock bit is set, then systemagent.asl would end up reporting the base address of low MMIO incorrectly i.e. off by 1. This change masks the lower 20 bits of TOLUD and TOM registers when exposing it in the ACPI tables to ensure that the base address of low MMIO region is reported correctly. Change-Id: I2ff7a30fabb7f77d13acadec1e6e4cb3a45b6139 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-20soc/intel/skylake: Update systemagent.asl to ASL2.0Furquan Shaikh
This change updates systemagent.asl to use ASL2.0 syntax. This increases the readability of the ASL code. TEST=Verified using --timeless option to abuild that the resulting coreboot.rom is same as without the ASL2.0 syntax changes for soraka. Change-Id: If8d8dd50af9a79d30f54e98f7f2fe7ce49188763 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41480 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-20soc/intel/common/block/acpi: Fix error in shift operation for GPCLFurquan Shaikh
CB:41454 updated northbridge.asl to ASL2.0 syntax. During this, GPCL was incorrectly updated to use << (ShiftLeft) instead of >> (ShiftRight). This change fixes the error in GPCL by updating it to use >> (ShiftRight). TEST=Verified using --timeless option to abuild that the resulting coreboot.rom is same as without the ASL2.0 syntax changes for hatch. Change-Id: I36469cb3b0bcc595acf0e43808d6a574986cad68 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41519 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20soc/amd/picasso: Add pcie root complex driverMarshall Dawson
* Declare memory and reserved areas using HOBs for regions above top of low memory. * Copy northbridge_fill_ssdt_generator from stoneyridge. BUG=b:147042464 TEST=Boot trembyle and see PCI resources in the log: PCI: 00:00.0 PCI: 00:00.0 resource base 0 size a0000 align 0 gran 0 limit 0 flags e0004200 index 0 PCI: 00:00.0 resource base a0000 size 20000 align 0 gran 0 limit 0 flags f0000200 index 1 PCI: 00:00.0 resource base c0000 size 40000 align 0 gran 0 limit 0 flags f0004200 index 2 PCI: 00:00.0 resource base 100000 size cd700000 align 0 gran 0 limit 0 flags e0004200 index 3 PCI: 00:00.0 resource base f8000000 size 4000000 align 0 gran 0 limit 0 flags f0000200 index c0010058 PCI: 00:00.0 resource base ce000000 size 2000000 align 0 gran 0 limit 0 flags f0004200 index 4 PCI: 00:00.0 resource base 100000000 size 12f340000 align 0 gran 0 limit 0 flags e0004200 index 5 PCI: 00:00.0 resource base 22f340000 size cc0000 align 0 gran 0 limit 0 flags f0004200 index 6 PCI: 00:00.0 resource base cd800000 size 800000 align 0 gran 0 limit 0 flags f0004200 index 7 PCI: 00:00.0 resource base cd7fe000 size 2000 align 0 gran 0 limit 0 flags f0004200 index 8 PCI: 00:00.0 resource base cc7fe000 size 1000000 align 0 gran 0 limit 0 flags f0004200 index 9 PCI: 00:00.0 resource base 1090000 size b0000 align 0 gran 0 limit 0 flags f0004200 index a Change-Id: I44a4a97765151fbcfe4c5d8de200e3e015aaaf2e Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34424 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20soc/amd/picasso: Add Kconfig option for the PSP bootloader filenameMartin Roth
Add option to change bootloader file. BUG=b:149934526 TEST=Change option and verify new bootloader file is used. Using the amd_blobs I can only boot using PspBootLoader_test_RV_dbg.sbin. Change-Id: Ib6597f7d4ffa0d48aead6974bd7111c987418f20 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2067598 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-20soc/amd/picasso/acpi: Improve PCI Interrupt Link DevicesRaul E Rangel
The PCI interrupt devices were only partially implemented. * Lacked support for _DIS to disable the bus. Something the kernel does while booting. * Lacked support for APIC vs PIC. This means the devices can only be used when using the PIC. By looking at the PMOD variable we can handle both PIC and APIC. This means we can stop hard coding the PCI interrupt numbers in the ACPI tables. * I removed INT[E-H] since they are not used. BUG=b:139429446, b:147042464 BRANCH=none TEST=Boot with both the APIC and PIC and saw that the link devices work as expected: PIC MODE: [ 1.959345] ACPI: PCI Interrupt Link [IRQA] (IRQs 1 3 4 5 *6 7 8 9 10 11 12 14 15) [ 2.007344] ACPI: PCI Interrupt Link [IRQB] (IRQs 1 3 4 5 *6 7 8 9 10 11 12 14 15) [ 2.056344] ACPI: PCI Interrupt Link [IRQC] (IRQs 1 3 4 5 6 7 8 9 10 11 12 *14 15) [ 2.104344] ACPI: PCI Interrupt Link [IRQD] (IRQs 1 3 4 5 6 7 8 9 10 11 12 14 *15) [ 13.752676] PCI Interrupt Link [IRQA] enabled at IRQ 6 [ 13.816755] PCI Interrupt Link [IRQD] enabled at IRQ 15 [ 27.788798] PCI Interrupt Link [IRQB] enabled at IRQ 6 [ 27.852873] PCI Interrupt Link [IRQC] enabled at IRQ 14 APIC MODE: [ 19.311764] ACPI: PCI Interrupt Link [IRQA] (IRQs *16 17 18 19 20 21 22 23) [ 19.374765] ACPI: PCI Interrupt Link [IRQB] (IRQs 16 *17 18 19 20 21 22 23) [ 19.438770] ACPI: PCI Interrupt Link [IRQC] (IRQs 16 17 *18 19 20 21 22 23) [ 19.501764] ACPI: PCI Interrupt Link [IRQD] (IRQs 16 17 18 *19 20 21 22 23) [ 34.719072] PCI Interrupt Link [IRQA] enabled at IRQ 23 [ 34.798994] PCI Interrupt Link [IRQD] enabled at IRQ 22 [ 66.469510] PCI Interrupt Link [IRQB] enabled at IRQ 21 [ 66.542395] PCI Interrupt Link [IRQC] enabled at IRQ 20 Change-Id: I1bb84813b65c89b4b5479602be3e9a9fedb7333d Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2095683 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-05-20soc/amd/picasso/acpi: Move _PIC method to root namespaceRaul E Rangel
The _PIC method sets the interrupt model (PIC or APIC). It needs to be defined at the root level for the kernel to find it. Previously this method was never getting called, so we were always stuck in APIC mode. BUG=b:139429446, b:147042464 BRANCH=none TEST=Saw the method getting called [ 1.251774] ACPI Debug: "PIC MODE: 0000000000000001" Change-Id: Idd5e9646df8d56e7cbec2be8b4016c36d81e5fb8 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2095682 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41437 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-05-20soc/amd/picasso/soc_util: use socket type detectionFelix Held
Remove the Kconfig options for per board socket type selection and use the runtime detection instead. Change-Id: I82cf922661c24e2a529fa4927893727b643660e3 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41518 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20soc/amd/picasso/soc_util: add socket type detection and printingFelix Held
Change-Id: I643a4c5f8a42a5fb0603a1a049545b57d16493a6 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41517 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-19device: Add definitions for SoundWire specificationDuncan Laurie
This header implements structures to describe the properties defined in the SoundWire Discovery and Configuration Specification Version 1.0. By itself this just provides the property definitions, it is then used by the code that generates ACPI device properties and by the controller and codec drivers. A new header for MIPI vendor/device IDs is also added, with the MIPI Alliance board members added by default. This will be used in the same way as pci_ids.h to track devices added to coreboot. BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: Ie9901d26d1efe68edad7c049c98a976c4e4f06f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40883 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-19soc/amd/picasso/romstage: removed unused includeFelix Held
Change-Id: I550599ae5ef9875ce820a4534d21439ff2027585 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41513 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-05-19superio/winbond/w83977tf: Fix iasl warningKeith Hui
The common PnP serial port DSDT code is intentionally included twice for two serial ports with different LDNs. Undefine LDN and the PM register name before redefining for second serial port so iasl doesn't complain. Change-Id: I031905479c66698fb01da028e3f37d923396d2d9 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41095 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-19nb/intel/sandybridge: Do not hardcode resource indicesAngel Pons
Other northbridges use an index variable to assign monotonically incrementing values to each resource. Do it here as well. Change-Id: I8719a1a5973a10531cf11b3307652212cb3d4895 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-19security/tpm/tspi: Fix handling of white space delimited listharshit
The current implementation uses strcmp() without splitting the list and therefore returns false even when the string pointed to by 'name' is a part of 'whitelist'. The patch fixes this problem. Also, update help text of CONFIG_TPM_MEASURED_BOOT_RUNTIME_DATA to space delimited list to align it with the other lists we use. Change-Id: Ifd285162ea6e562a5bb18325a1b767ac2e4276f3 Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41280 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-05-19nb/intel/sandybridge: Correct IOSAV register notesAngel Pons
The IOSAV register descriptions are plagued with errors and nonsense. Using `git blame` to find the culprit... Zoinks! Turns out it was me! Rewrite the comment so that the difference between a sub-sequence and a command is clear. Also, expand the descriptions that could be ambiguous and fix some insane blunders. CKE and ODT fields are per DIMM and rank! As per review comments, also invert the order of bitfield value ranges. Change-Id: Ie384304c565f962fe58baa231c15109eb3d284aa Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-19tests: Add region-test for rdev APIJulius Werner
This patch adds a basic test for the common region and region_device APIs, sanity checking the basic functions and things like overflow-handling. There is certainly more that could be added here, but it's a start. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I4932402f54768557e5b22b16e66220bd90ddebfd Reviewed-on: https://review.coreboot.org/c/coreboot/+/41046 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Jan Dabros Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-19tests: Add <tests/test.h> wrapper header and fix --gc-sectionsJulius Werner
<cmocka.h> requires a few standard headers to be explicitly included before itself or it will throw compilation errors. Having to always include these headers in the right order in every test is cumbersome. Instead, this patch encapsulates the problem in a new <tests/test.h> header that all tests should include (instead of <cmocka.h> directly). Also fix --gc-sections in the test framework which needs to be passed for linking, not for compiling. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I4284d74c8673708e21a5266eb42f7b9ae19a1b12 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41045 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Dabros Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-05-18soc/amd/picasso: add telemetry settingChris Wang
Add telemetry setting for SDLE testing BUG=b:147570294 TEST=Build Morphius and check the setting was been applied Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If4bb75eeaaa68b2c5a6a36c28c34fb338be65851 Reviewed-on: https://chromium-review.googlesource.com/2056885 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com> Tested-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-18soc/amd/picasso/romstage: add missing types.h includeFelix Held
Change-Id: I26f15e7bd2f65e94ed1c2771bd8504114bfcda48 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-05-18src: Remove unused 'include <string.h>'Elyes HAOUAS
Unused includes found using following commande: diff <(git grep -l '#include <string.h>' -- src/) <(git grep -l 'memcpy\|memmove\|memset\|memcmp\|memchr\|strdup\|strconcat\|strnlen\|strlen\|strchr\|strncpy\|strcpy\|strcmp\|strncmp\|strspn\|strcspn\|atol\|strrchr\|skip_atoi\|STRINGIFY' -- src/) |grep -v vendorcode |grep '<' Change-Id: Ibaeec213b6019dfa9c45e3424b38af0e094d0c51 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-05-18mb/lenovo/{x230, t430s}: add H8_HAS_PRIMARY_FN_KEYS for {x230s, t431s}Bill XIE
X230s and T431s have keyboard similar to the one found on t440p, so H8_HAS_PRIMARY_FN_KEYS and related cmos options may apply to them. Tested on both X230s and T431s. Change-Id: I234820b92093acdd64ff60cae39015547b6e981e Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41403 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18soc/amd/picasso/Makefile: Use apcb_tool to generate APCBs from SPDsRaul E Rangel
BUG=b:147042464 TEST=Boot trembyle to OS Signed-off-by: Rob Barnes <robbarnes@google.com> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ife48d5268230f70c6a6f4a56c1f0d05b6c924891 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41381 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18util/apcb: Add apcb_edit toolRob Barnes
On the Picasso architecture, the PSP is responsible for setting up DRAM before releasing the x86. The APCB (AGESA PSP Configuration Block) contains multiple SPDs and the GPIO numbers used to select the correct SPD. Since the source to build the APCBs is not public, it can't be built as part of the coreboot build. To work around this problem, we use a template APCB and inject the relevant information. BUG=b:147042464 Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I88a09743f8e8a184c47071ee5e417f5b6bdb7467 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2123799 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-18src: Remove unused 'include <lib.h>'Elyes HAOUAS
Change-Id: Iad5540e791075270453a136a058823c28647f93a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-05-18mb/google/{parrot,stout}: Remove unused 'include <elog.h>'Elyes HAOUAS
Change-Id: I7c6f47f03f1c83658f4364f81f6436d7b2f4f377 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-183rdparty/libgfxinit: Update submodule pointer, againBill XIE
6b95507ec5b087658178a325bdc68570bc48bb20 has mistakenly reverted the submodule pointer of 3rdparty/libgfxinit to cdbfce27, canceling c844d14ca5081b2cb2f1036bdf0c2112405342d1. This commit sets it back, recovering c844d14c. Change-Id: Ib594e40a39ea83dd2238becb287f2516e7c54046 Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41400 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18libpayload: Fix definitions of minimum integer valuesYu-Ping Wu
Fix incorrectly defined constants INT16_MIN, INT32_MIN and INT64_MIN, which recursively call themselves. BRANCH=none BUG=none TEST=emerge-nami libpayload Change-Id: I1fa8402d318393de2e02f1e632ab78b6ec0768e8 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41391 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Joel Kitching <kitching@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18soc/intel/tigerlake: Add FSP UPD TcssDma0En and TcssDma1EnJohn Zhao
This adds FSP UPD TcssDma0En and TcssDma1En for configuration. BUG=:b:146624360 TEST=Built and booted on Volteer. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I04af970f74ab9dfe84f9c0c09ec2098e0093fa57 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41383 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-05-18vendorcode/intel/fsp: Update Tiger Lake FSP Headers for FSP v3163Srinidhi N Kaushik
Update FSP headers for Tiger Lake platform generated based FSP version 3163, which includes below additional UPDs: FSPM: TcssDma0En TcssDma1En FSPS: PchFivrExtV1p05RailEnabledStates PchFivrExtV1p05RailSupportedVoltageStates PchFivrExtVnnRailEnabledStates PchFivrExtVnnRailSupportedVoltageStates PchFivrExtVnnRailSxVoltage PchFivrExtV1p05RailIccMaximum CstateLatencyControl5TimeUnit VmdEnable BUG=none BRANCH=none TEST=build and boot ripto/volteer Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Icc893073629df59aef60162bed126d1f4b936e90 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41377 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18util/cbfstool: fix buffer over-readPhilipp Bartsch
Fix unterminated array. When looking for a type not specified in filetypes (cbfs.h:204), the loop in lookup_name_by_type (cbfs_image.c:60) will run into a buffer over-read. Found-by: AFL++ 2.64d rev 1317433 Signed-off-by: Philipp Bartsch <phil@grmr.de> Change-Id: Ib82bb92e82b09fa1e26b9ca34529ec7b98e8f7b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41421 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18soc/amd/picasso: Switch to using amd_blobsRaul E Rangel
BUG=b:147042464 TEST=build trembyle and boot to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ie6ac8b0701ac27733dd9724873664f5f17fcfa29 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41435 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-18soc/amd/picasso: only link soc_util in ramstageFelix Held
No code that was or will be upstreamed uses functionality from soc_util in romstage, so only compile and link it for ramstage. This also allows to fix the SoC type detection in a follow-up patch using information that FPS-M will be providing in a HOB. BUG=b:153779573 Change-Id: If96e53608eadd562f6de5a0c370b89e84e43d049 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-18device/pci_device: Remove useless pci_bus_ops_pciTim Wawrzynczak
The struct (formerly assigned to default_pci_ops_bus.ops_pci) only contained a NULL (well, 0) pointer for the set_subsystem callback, but usage of that callback is guarded with NULL checks when it is used, therefore it can be removed. TEST=still compiles Change-Id: I3943c8ae73b95e744a317264d7ceb8929cb28341 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41432 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18broadwell: update processor power limits configurationSumeet R Pawnikar
Update processor power limit configuration parameters based on common code base support for Intel Broadwell SoC based platforms. BRANCH=None BUG=None TEST=Build for broadwell based platform Change-Id: I97e38a533e74a122b6809e20a10f6e425827ab9c Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-18mb/portwell/m107: Remove direct 'include <soc/gpio.h>'Elyes HAOUAS
Don't directly include <soc/gpio.h>. All code using GPIO features should always and only include <gpio.h>, which should indirectly include the SoC-specific <soc/gpio.h>. Change-Id: I78f1e250570f1b395c61115d4a872b24b3d58f69 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-05-18mb/facebook/fbg1701: Remove direct 'include <soc/gpio.h>'Elyes HAOUAS
Don't directly include <soc/gpio.h>. All code using GPIO features should always and only include <gpio.h>, which should indirectly include the SoC-specific <soc/gpio.h>. Change-Id: Id2663398b9f069ab1f60d63016ea7aa080f66d20 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-05-18mb/google/hatch: Add Mushu variant specific DPTF parametersJohn Su
The change applies the DPTF parameters received from thermal team. 1. Set PL1 Max to 25W 2. Set PL2 Max to 44W 3. Update Temp sensor parameters BUG=b:152011093 BRANCH=none TEST=build and verified by thermal team Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I225897832b02f9de6221053b68fbdba30f8b199a Reviewed-on: https://review.coreboot.org/c/coreboot/+/41165 Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18soc/intel/jasperlake: Add function to display ME firmware status infoKrishna Prasad Bhat
Add function to display ME Host Firmware Status registers. Make use of print_me_fw_version() from CSE lib to print ME firmware version information. Add manufacturing mode field in HFSTS1 register for JSL in place of, spi_protection_mode in TGL. BUG=None BRANCH=None TEST=Build and boot jslrvp. In coreboot logs, ME info can be seen. ME: Version: 13.5.0.7049 ME: HFSTS1 : 0x90006255 ME: HFSTS2 : 0x82100136 ME: HFSTS3 : 0x00000020 ME: HFSTS4 : 0x00004800 ME: HFSTS5 : 0x00000000 ME: HFSTS6 : 0x00400006 ME: Manufacturing Mode : YES ME: FW Partition Table : OK ME: Bringup Loader Failure : NO ME: Firmware Init Complete : YES ME: Boot Options Present : NO ME: Update In Progress : NO ME: D0i3 Support : YES ME: Low Power State Enabled : NO ME: CPU Replaced : YES ME: CPU Replacement Valid : YES ME: Current Working State : 5 ME: Current Operation State : 1 ME: Current Operation Mode : 0 ME: Error Code : 6 ME: CPU Debug Disabled : YES ME: TXT Support : NO Change-Id: Ic6b1c9410db8f06ac24fd997772b2ede04264bee Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-18mb/google/deltaur: Remove DSP settingEric Lai
Deltaur does not use DSP so remove the DSP setting. BUG=b:155360937 TEST=Recording and playing are working fine in OS. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I01c076806448fc73980ec02e7558ccf082723d92 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41423 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-18mb/google/deltaur: Add audio verb tableEric Lai
Add audio verb table provided by vendor. BUG=b:156447983 TEST=Have beep sound when run "devbeep" in CLI. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I807d84de1677459ea027e645488f485b0ac7b2ac Reviewed-on: https://review.coreboot.org/c/coreboot/+/41401 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18mb/google/deltaur: Update audio settingEric Lai
Deltaur uses HDA codec so we need to set iDisplay Audio Codec disconnection and enable HdaAudioLink, otherwise the HDA codec won't respond to commands to execute HDA verbs. BUG=b:156447983 TEST=No timeout error when run "devbeep" in CLI. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I15d2895866abcf68963c9732ed5d05f32096fc92 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41397 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18soc/intel/tigerlake: Add PchHdaIDispCodecDisconnect overrideEric Lai
This is a missing config override in fspm_upd. iDisplay Audio Codec disconnection 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable. BUG=b:156447983 TEST=None Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ifbbc22d14e06713009c550cbe8a7292de64e1fdc Reviewed-on: https://review.coreboot.org/c/coreboot/+/41394 Reviewed-by: Kane Chen <kane.chen@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18mb/google/dedede: update SPD name based on DRAM characteristicMarco Chen
The index of DRAM_STRAPS indicates to a specific DRAM characteristic instead of a DRAM part number therefore update the existing DRAM SPD binary to the naming by DRAM characteristic. BUG=b:152019429 BRANCH=None TEST=build the image and verify that coreboot log shows the correct SPD info Change-Id: I8ffcf156f37a465209740c5e2a34effb5f1f5d5c Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-18skylake: update processor power limits configurationSumeet R Pawnikar
Update processor power limit configuration parameters based on common code base support for Intel Skylake SoC based platforms. BRANCH=None BUG=None TEST=Built and tested on nami system Change-Id: Idc82f3d2f805b92fb3005d2f49098e55cb142e45 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-18Remove new additions of "this file is part of" linesElyes HAOUAS
Change-Id: I96dfa5b531842afcf774dd33c2dfa532b5d329c6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-05-18util/autoport/bd82x6x.go: Drop unused includesElyes HAOUAS
Change-Id: Ifc0bf18dedc112e346062e0e0e988ac102991bb8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40826 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18soc/intel/common/block/smbus: Use i2c read eeprom to speedup SPD readWim Vervoorn
Reading the SPD using the SMBUS routines takes a long time because each byte or word is access seperately. Allow using the i2c read eeprom routines to read the SPD. By doing this the start address is only sent once per page. The time required to read a DDR4 SPD is reduced from 200 msec to 50 msec. BUG=N/A TEST=tested on facebook monolith Change-Id: I44e18b8ba72e1b2321f83402a6a055e2be6f940c Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40942 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-05-18mb/facebookmonolith: Update root port settingsWim Vervoorn
Update monolith root port settings to match those of the original BIOS. MaxPayload is set to 256 bytes, ASPM is disabled and LTR and Advanced Error reporting are enabled. BUG=N/A TEST=tested on facebook monolith Change-Id: Idf6e706d45cf1ea1aee4a75a6d0eb130b21db927 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-05-18soc/mediatek: dsi: adjust hfp_byte and hbp_byte if too smallPaul Ma
If panel has too small hfp or hbp, hfp_byte or hbp_byte may become very small value or negative value. When very small value or negative value is used, the panel will be scrolling or distorted. This patch adjusts their values so that they are greater than the minimum value and keep total of them unchanged. DSI transfer HBP or HFP, There are some extra packet. ex. packet header(4byte) and eof(2byte) and (next)hs packet header(4 byte). the hfp_byte = HFP * BPP - packet header(4byte) and eof(2byte) and (next)hs packet header(4 byte). So the min hfp_byte is 2 when HFP = 4. This is equivalent to the Linux kernel DSI change in: https://chromium-review.googlesource.com/c/chromiumos/third_party/ kernel/+/2186872 BUG=b:144824303 BRANCH=kukui TEST=boot damu board with panel CMN N120ACA-EA1 (12" panel and its hbp only 6), the panel can display without scrolling or distortions. Signed-off-by: Paul Ma <magf@bitland.corp-partner.google.com> Change-Id: I608c01d41ae93c8d5094647bbf3e0ae4a23d814c Reviewed-on: https://review.coreboot.org/c/coreboot/+/41163 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18jasperlake: update processor power limits configurationSumeet R Pawnikar
Update processor power limit configuration parameters based on common code base support for Intel Jasperlake SoC based platforms. BRANCH=None BUG=None TEST=Built for jasperlake system Change-Id: I9b725d041dcb8847f83ec103e58b9571b4c596ac Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-18soc/intel/common: add processor power limits control supportSumeet R Pawnikar
Add processor power limits control support under common code. BRANCH=None BUG=None TEST=Built and checked this entry on Volteer system, cat /sys/class/powercap/intel-rapl/intel-rapl\:0/* Change-Id: I41fd95949aa2b02828aa2d13d29b962cb579904a Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39346 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-18soc/amd/picasso: Set VERSTAGE_ADDR for picassoRaul E Rangel
By default ROMSTAGE_ADDR and VERSTAGE_ADDR are set to 0x2000000. This causes problems in a non-xip environment because when verstage loads romstage, it overrides it's memory. So pick a different offset for verstage. BUG=b:147042464 TEST=Boot verstage on trembyle and see OS boot. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I2464db6f3769bd23d250588b341d1c9e44f10d21 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41367 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18arch/x86/early_ram.ld: Add vboot work bufferRaul E Rangel
This is required to enable VBOOT_STARTS_IN_BOOTBLOCK and VBOOT_SEPARATE_VERSTAGE for picasso. BUG=b:147042464 TEST=Boot verstage on picasso Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ic3e261a6919a78760d567be9cc684494a5aeab6d Reviewed-on: https://review.coreboot.org/c/coreboot/+/41366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-18mb/ripto: Update ALC5682 headset interrupt configurationsShaunak Saha
As per schematics configure headset interrupt as edge both for ripto and volteer baseboard. BUG=b:147085988 BRANCH=none TEST=Build and boot ripto board. Test that jack functionality is working fine and also confirm with evtest. Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Change-Id: I8e1625140ccf55db8cb0fe3c039f1c31c01069b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
2020-05-18soc/intel/tigerlake: Fix wrong operation region for CPU to PCH methodJohn Zhao
CPU to PCH method refers to PCH ACPI operation region which was wrongly defined as SystemIO. This causes ACPI AE_LIMIT error from PM _DSW method. Change the operation region from SystemIO to SystemMemory to resolve this execution failure. BUG=b:140290596 TEST=Built and booted to kernel. _DSW method executes successfully without ACPI AE_LIMIT error. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I3965c3d891f7d3cf4a448edc0c3f7e7749a905a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41365 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-05-18util/release: Check that HEAD isn't used as referencePatrick Georgi
genrelnotes moves the tree between commits and so a relative location like HEAD isn't stable. Since I ran into the HEAD issue while preparing for two consecutive releases, let's guard against it. Change-Id: I70c6812cdfe0d0671b3d653744a062d9920a2394 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41339 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18util/release: Improve reporting of required toolsPatrick Georgi
genrelnotes checks for cloc, git and rename but only reported about needing the first two, so mention `rename` in missing message. Change-Id: If91d759fc68760fd89b98756ac5b19ac3589c197 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41338 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-18Documentation: Fix 4.12 release notes, improve checklistPatrick Georgi
Since I seem to forget to remove "Upcoming" in the release notes every single time, and others might as well, fix it here and also tell future release managers to take care of that. Change-Id: I8ffe34f25e954621bdd635e115a8b1a914df9c27 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41337 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-18nb/intel/sandybridge: Use or-based logic for RANKSELAngel Pons
NO_RANKSEL was introduced because it appeared less often and it did not cause any lines to become too long. To simplify macro transmutation, add the RANKSEL opposite and keep NO_RANKSEL as a no-op to ease replacement. Line length limits are not for review. Breaking the lines unnecessarily complicates search and replace operations, and wil be taken care of in subsequent commits. Tested with BUILD_TIMELESS=1, ASUS P8Z77-V LX2 remains unchanged. Change-Id: I5d7aad59fc79840da7de2e9421b84834a6024eb9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40977 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18nb/intel/sandybridge: Program IOSAV with macrosAngel Pons
This is a temporary solution to simplify refactoring verification. Programming a subsequence involves writing a group of four registers. Abstract this into a "program subsequence" operation. This eliminates register write noise, which should improve the readability of the code. To replace the register writes with assignments to struct fields, we would need to have the values as parameters of a single macro. So, unroll SUBSEQ_CTRL and SP_CMD_ADDR into parameters of IOSAV_SUBSEQUENCE. Line length limits are not for review. Breaking the lines unnecessarily complicates search and replace operations, and wil be taken care of in subsequent commits. Tested with BUILD_TIMELESS=1, ASUS P8Z77-V LX2 remains unchanged. Change-Id: I23f7706ba8a87c1c26f9d40a50b6d47dcf95106a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40971 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-05-18nb/intel/sandybridge: Add and use BROADCAST_CH for IOSAVAngel Pons
We have a single IOSAV sequence that is broadcast across all channels. Introduce the BROADCAST_CH macro, so that we can use the per-channel register definitions. Treating all IOSAV sequence writes the same eases the refactoring done in subsequent commits. Also, drop the broadcast register definitions for the IOSAV commands, as they are now obsolete. Line length limits are not for review. Breaking the lines unnecessarily complicates search and replace operations, and wil be taken care of in subsequent commits. Tested with BUILD_TIMELESS=1, ASUS P8Z77-V LX2 remains unchanged. Change-Id: I2dbb100fcad68d128e92b1bc9321fc1e53b748c9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40976 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18nb/intel: Const'ify pci_devfn_t devicesElyes HAOUAS
Change-Id: Ib470523200929868280f57bb0cc82b038d2fedf6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-18x86/include/arch/mmio.h: Convert to 96 characters line lengthElyes HAOUAS
Change-Id: I93d0ef6db417904c345fe7b76730bcb70ba25089 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41361 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18mainboard/*/*/*.cb: Remove leading blank lines from SPDX headerElyes HAOUAS
Change-Id: Ia0dbf7b946d42bda11b904a9caff5a402b553b33 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-18mainboard/*/*/Kconfig*: Remove leading blank lines from SPDX headerElyes HAOUAS
Change-Id: I7089b29e881d74d31477e2df1c5fa043fe353343 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41358 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18src: Remove leading blank lines from SPDX headerElyes HAOUAS
Change-Id: I8a207e30a73d10fe67c0474ff11324ae99e2cec6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41360 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18driver/i2c/max98390: Correct included file pathSeunghwan Kim
Fix coreboot build error with adding this driver BUG=b:149443429 BRANCH=None TEST=built without errors Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Change-Id: I46bced77a50903c16239a5162d144697e9d704a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41389 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-173rdparty/amd_blobs: Update with Picasso imagesMarshall Dawson
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: Ie886815ed354762ea52fd6a76169cf25576f8852 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-05-17sb/intel/lynxpoint/lp_gpio.h: Include stdint.hAngel Pons
The struct definition makes use of types defined in that header. Change-Id: I1d989298b8bf6266905330491c136874be7f5e28 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-17drivers/xgi: Remove dead codeAngel Pons
This was used by the now-gone Asus KFSN4-DRE mainboard. Drop it. Change-Id: Id00c883ed0f80e7af96fdf3f6e2985dd5b227831 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41402 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-17mb/asus/p2b: Remove variant validation guards from DSDTKeith Hui
With conversion to variant structure complete, remove temporary guards inserted to help validate the move. With this change, all P2B family boards (currently p2b and p2b-ls) share the same S-state declarations. TEST=No apparent ACPI regression observed on p2b-ls. Change-Id: Ibd6e49adeae2a42800ee5bfd74b3850eb19843a5 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-17soc/intel/common: Rename cse_is_hfs3_fw_sku_custom()Sridhar Siricilla
Rename cse_is_hfs3_fw_sku_custom() to cse_is_hfs3_fw_sku_lite() and rename custom_bp.c to cse_lite.c. Also, rename all CSE Custom SKU references to CSE Lite SKU. TEST=Verified on hatch Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I20654bc14f0da8d21e31a4183df7a2e34394f34e Reviewed-on: https://review.coreboot.org/c/coreboot/+/41341 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2020-05-17soc/intel/common/block/acpi: Mask lower 20 bits of TOLUDFurquan Shaikh
Lower 20bits of TOLUD register include 19 reserved bits and 1 lock bit. If lock bit is set, then northbridge.asl was reporting the base address of low MMIO incorrectly i.e. off by 1. This resulted in Linux kernel complaining that the MMIO window allocated to the device at the base of low MMIO is incorrect: pci 0000:00:1c.0: can't claim BAR 8 [mem 0x7fc00000-0x7fcfffff]: no compatible brw pci 0000:00:1c.0: [mem 0x7fc00000-0x7fcfffff] clipped to [mem 0x7fc00001-0x7fcfff] pci 0000:00:1c.0: bridge window [mem 0x7fc00001-0x7fcfffff] This change masks the lower 20 bits of TOLUD register when exposing it in the ACPI tables to ensure that the base address of low MMIO region is reported correctly. TEST=Verified that kernel dmesg no longer complains about the BAR at base of low MMIO. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I4849367d5fa03d70c50dc97c7e84454a65d1887a Reviewed-on: https://review.coreboot.org/c/coreboot/+/41455 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-17soc/intel/common/block/acpi: Update northbridge.asl to ASL2.0 syntaxFurquan Shaikh
This change updates northbridge.asl to use ASL2.0 syntax. This increases the readability of the ASL code. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: If8eabb6b934b74e69cdf4e18981082028399244d Reviewed-on: https://review.coreboot.org/c/coreboot/+/41454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-16Revert "device: Enable resource allocator to use multiple ranges"Furquan Shaikh
This reverts commit 3b02006afe8a85477dafa1bd149f1f0dba02afc7. Reason for revert: Resource allocator patches need to be reverted until the AMD chipsets can be fixed to handle the resource allocation flow correctly. BUG=b:149186922 Change-Id: Id9872b90482319748b4f3ba2e0de2185d5c50667 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41413 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Mike Banon <mikebdp2@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-16Revert "device: Enable resource allocation above 4G boundary"Furquan Shaikh
This reverts commit 44ae0eacb82259243bf844a3fe5ad24a7821e997. Reason for revert: Resource allocator patches need to be reverted until the AMD chipsets can be fixed to handle the resource allocation flow correctly. BUG=b:149186922 Change-Id: I90f3eac2d23b5f59ab356ae48ed94d14c7405774 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41412 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Mike Banon <mikebdp2@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-16Revert "pciexp_device: Add option to allocate prefetch memory above 4G boundary"Furquan Shaikh
This reverts commit dcbf6454b6d2d9b3627a14126ef20ed4b9c7d954. Reason for revert: Resource allocator patches need to be reverted until the AMD chipsets can be fixed to handle the resource allocation flow correctly. Change-Id: I58c9fff1a18ea1c9941e29c2c6e60e338c517c30 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Mike Banon <mikebdp2@gmail.com>
2020-05-16Revert "mb/google/volteer: Enable PCIEXP_HOTPLUG for TCSS TBT/USB4 ports"Furquan Shaikh
This reverts commit 2412924bc7646fc22b2cb1b9108413fa3e849082. Reason for revert: Resource allocator patches need to be reverted until the AMD chipsets can be fixed to handle the resource allocation flow correctly. BUG=b:149186922 Change-Id: Iea6db8cc0cb5a0e81d176ed3199c91dcd02d1859 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41411 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Mike Banon <mikebdp2@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-16mb/dell/optiplex_9010: Add Dell OptiPlex 9010 SFF supportMichał Żygowski
Based on the autoport. The OptiPlex 9010 comes in four different sizes: MT, DT, SFF and USFF. Tested on SFF only. The other PCBs are slightly different, but they are designed with intercompatibility in mind. With small devicetree overrides it should work on OptiPlex 7010 and other OptiPlex 9010 variants as well. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I88d65cae30d08ca727d86d930707c2be25a527cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/40351 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-16superio/smsc/sch5545: add support for SMSC SCH5545Michał Żygowski
The SMSC SCH5545 is very similar to the publicly available datasheet for the SCH5627. TEST=use PS2 keyboard and mouse, serial port, runtime registers and Embedded Memory Interface on Dell Optiplex 9010 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: If8a60d5802675f09b08014ed583d2d8afa29fc04 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40350 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-15drivers/i2c/designware: Check if the device is poweredRaul E Rangel
If the device doesn't return a valid component type, that means the device is non-functional. The dw_i2c_regs had invalid offsets for the version field. I got the correct value from the DesignWare DW_apb_i2c Databook v2.02a. It also matches what the Picasso PPR says. I also print out the version field of the controller. BUG=b:153001807 BRANCH=none TEST=Tested on PSP where I2C is non functional. Also tested on trembyle and verified i2c was initialized. Saw the following in the logs I2C bus 2 version 0x3132322a Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: If5527972508e0f4b35cc9ecdb1491b1ce85ff3af Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2144540 Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40870 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-15soc/intel: Correct comment on HMRFPO_ENABLE HECI commandSridhar Siricilla
Correct comment on HMRFPO_ENABLE flow for CSE Lite SKU. In order to place CSE into SECOVER_MEI_MSG mode, below procedure has to be followed. 1. Ensure CSE boots from RO(BP1). - Set CSE's next boot partition to RO - Issue GLOBAL_RESET HECI command to reset the system 2. Send HMRFPO_ENABLE command to CSE. Further, no reset is required. TEST=Verified on hatch Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I213e02ba3898194fa6c8fe38fab34b5c19f25aa1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41340 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-15mb/google/volteer: Add delay to WWAN GPIO init sequenceAlex Levin
Based on Fibocom HW user manual RESET should be deasserted at least 20ms after the power on pin. The design for the reset pin is open drain connected to a pull up, so it is set to high-Z (configured as GPIO in) after 20ms. BUG=b:152013143 BRANCH=none TEST=traced the signals using a scope to verify timing is met. Signed-off-by: Alex Levin <levinale@chromium.org> Change-Id: I7c947d1bc4cce1f97383a2f2c254986e182661c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41356 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-15acpigen_ps2_keybd: Add keymap for Power keyRajat Jain
Power key is a special non-matrixed key. Chrome /powerd only listens to the keyboard device for this key, so add its keymap. BUG=b:155941390 TEST=Test that power key generates KEY_POWER in linux evtest Change-Id: I570602d9febcb5c17e58761f2004ee88be16c27f Signed-off-by: Rajat Jain <rajatja@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41382 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-14trogdor: Update pull for Sd-card detect pinShaik Sajida Bhanu
Configuring pull for SD-card detect pin. Without this SD-card detection is not working as expected Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org> Change-Id: I77bf355a049224784a160defa6bee66d0f9ceb75 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40534 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-05-14sc7180: GPIO: Add I2S configuration for sc7180vsujithk
Configuring GPIO Pins as I2S mode for Audio speaker. Change-Id: I681aa6d0d57671b0fd9b7bc88de6f2cc202a7af0 Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-05-14samsung/exynos5420: add resources during read_resources()Furquan Shaikh
The chipset code was incorrectly adding memory resources to the domain device after resource allocation occurred. It's not possible to get the correct view of the address space, and it's generally incorrect to not add resources during read_resources(). This change fixes the order by adding resources in read_resources(). Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I49ce6ac88c4cb7cd05ff9d78133593ce97304596 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41374 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-14soc/samsung/exynos5250: add resources during read_resources()Furquan Shaikh
The chipset code was incorrectly adding memory resources to the domain device after resource allocation occurred. It's not possible to get the correct view of the address space, and it's generally incorrect to not add resources during read_resources(). This change fixes the order by adding resources in read_resources(). Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I419be7edf289636b24b9a7d6c390866ade638de3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41373 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-14soc/nvidia/tegra124: add resources during read_resources()Furquan Shaikh
The chipset code was incorrectly adding memory resources to the domain device after resource allocation occurred. It's not possible to get the correct view of the address space, and it's generally incorrect to not add resources during read_resources(). This change fixes the order by adding resources in read_resources(). Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I16f0439679471366723a0084918a20cd95834831 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41372 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-14aspeed/ast2050: Fix when resources are addedFurquan Shaikh
This change moves adding of resources to read_resources() instead of set_resources(). Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I7d5e4aa0fc28dd35f774957ef303d8854aa07913 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41370 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-14soc/amd/stoneyridge: add resources during read_resources()Furquan Shaikh
The chipset code was incorrectly adding memory resources to the domain device after resource allocation occurred. It's not possible to get the correct view of the address space, and it's generally incorrect to not add resources during read_resources(). This change fixes the order by adding resources during read_resources(). Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I532f508936d5ec154cbcb3538949316ae4851105 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41369 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-14nb/intel/i440bx: add resources during read_resources()Furquan Shaikh
The chipset code was incorrectly adding memory resources to the domain device after resource allocation occurred. It's not possible to get the correct view of the address space, and it's generally incorrect to not add resources during read_resources(). This change fixes the order by adding resources in read_resources(). Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I84c1ba8645b548248a8bb8bf5bc4953d3be12475 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41368 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Keith Hui <buurin@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-14nb/intel/sandybridge: add resources during read_resources()Aaron Durbin
The chipset code was incorrectly adding memory resources to the domain device after resource allocation occurred. It's not possible to get the correct view of the address space, and it's generally incorrect to not add resources during read_resources(). Fix the order by hanging the resources off of the host bridge device. Change-Id: I8a7081020be43da055b7de5a56dd97a7b5a9f09c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-05-14mb/google/deltaur: Configure GPIO B11 as PMCALERTAnil Kumar
GPIO B11 pin should be configured as PMCALERT function. This is required for the intergrated USB-C feature to work in the SOC BUG=b:154778458, b:156288164 TEST= build and boot coreboot image on deltan. Test Type-C port enumeration on Chrome OS Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: I8f995901b0a50d2c74f57aba96f86134c9d569e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41378 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-14mb/google/volteer: Enable PCIEXP_HOTPLUG for TCSS TBT/USB4 portsFurquan Shaikh
This change enables PCIEXP_HOTPLUG to support resource allocation for TCSS TBT/USB4 ports. BUG=b:149186922 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I4cb820e83da40434b00198b934453805e35ef1ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/41156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-14soc/intel: Drop ABOVE_4GB_MEM_BASE_SIZE and use cpu_phys_address_size()Furquan Shaikh
This change uses cpu_phys_address_size() to calculate the size of high MMIO region instead of a macro for each SoC. This ensures that the entire range above TOUUD that can be addressed by the CPU is used for MMIO above 4G boundary. Change-Id: I01a1a86c0c65856f9f35185c2f233c58f18f5dfe Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-14soc/intel: Always advertise MMIO window above 4G in ACPI tablesFurquan Shaikh
There should be no harm in advertising the MMIO window above 4G in ACPI tables unconditionally. OS can decide whether or not to use the window. This change removes the config option enable_above_4GB_mmio and instead adds the correct MMIO window (above 4G) details to ACPI tables always. Change-Id: Ie728f6ee7f396918e61b29ade862b57dac36cb08 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41276 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 01:37:32 +0000