| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: I9c41cccf9058c48006b247aca705a3f869ae82a6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5524
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This enables the ACPI SMI command port in the FADT table, and sets up
the hardware accordingly. If we have SMI enabled, then we don't set
the SCI_EN bit at boot, causing the OS to send the ACPI_ENABLE
command, as required by the ACPI spec. This gives us a chance to hook
into the mainboard_smi_apmc() handler.
Change-Id: Ib4c63d55b3132578dcae48bfe2092d4ea35821dd
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5511
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
Change-Id: Ifc368974a7a0dc0756431654fb89668e3846801a
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5502
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This sets up the infrastructure to handle SMIs generated by the Hudson
southbridge. An API for interfacing to mainboard handlers is not
defined at this point. A few functions are defined to allow mainboard
code to enable SMIs from GEVENT pins. These are the only functions which
I expect to be needed anytime in the foreseeable future.
SMIs are always acknowledged and cleared, as not clearing an SMI will
cause us to re-enter the SMI, effectively bricking the machine if a
southbridge-generated SMI without a handler occurs.
Change-Id: Ibceb21ac5423eb134d3eb7d24800280b183f7619
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5494
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Tested-by: build bot (Jenkins)
|
|
This is a small implementation which uses only MSRs and rdtsc, without
relying on northbridge or other system hardware. It's SMM safe in that
it only reads registers, and doesn't modify the state of the hardware.
Change-Id: Ifa02ca73455b382f830c9b30b80b4f1bb18706b4
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5501
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This is the minimal setup needed to be able to execute SMI handlers.
Only support for ASEG handlers is added, which should be sufficient
for Trinity (up to 4 cores).
There are a few hacks which need to be introduced in generic code in
order to make this work properly, but these hacks are self-contained.
They are a not a result of any special needs of this CPU, but rather
from a poorly designed infrastructure. Comments are added to explain
how such code could be refactored in the future.
Change-Id: Iefd4ae17cf0206cae8848cadba3a12cbe3b2f8b6
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5493
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
The MMIO region is set up by AGESA very early on, so we can use it to
access the PM register space in ramstage. 16-bit accessors are also
provided to simplify some setup tasks. 16-bit accesses are not
possible via PIO.
The pm2_iowrite/read accessors are removed, as they are not used.
Change-Id: Ie7967b5086eb004525c39721338c6495aedc8165
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5503
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
Change-Id: I45084ffe84fef4dd43acea843d7c93a81c255472
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5523
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
|
|
Not used with AGESA vendorcode.
Change-Id: I4de7e49d513a1bc8d6d4da1eea630b9eedf5de80
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5522
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
|
|
Not used with AGESA vendorcode.
Change-Id: I1c4e1dea8836143334d336f99afcee2ca326b0c9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5521
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
|
|
Not used with AGESA vendorcode.
Change-Id: Ic9a0513641bf76d748bb106675bccc33c7abe21e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5520
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Not used with AGESA vendorcode.
Change-Id: Ie99abf5bcffd740e2e7ed6d78937ab32935ef214
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5519
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
This config option is fam10 only.
Change-Id: I7f4619d2d4e7e7695a8ee691d879df2748f1c0c7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5518
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
There are 3 steps to enable the IMC fan control:
1. Enable fan control related registers on Hudson using oem_fan_control().
2. Set EcStruct.
3. Enable thermal zone using enable_imc_thermal_zone().
I have tested on Thatcher.
Change-Id: I959721b4fd8787ac0824f9f873efd4788682eedb
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Reviewed-on: http://review.coreboot.org/5359
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: Iabcb26229401b03ad4ba2df0f78eee08f379aa03
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5172
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Also strip down the config that's set since these are actually
SeaBIOS options, not FILO...
Change-Id: I5dbe6255996f9e115699ff2a83fb3450533520ee
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4647
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
In some cases the build system tried to build main.c before
copying the various "shipped" files (lex/yacc output) where
the place the compiler expects them.
Make the dependency explicit.
Change-Id: Iacef5292aadb9fe7bc967aa4ab5ee6c9fe4df3d7
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5510
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Other toolchains just don't cut it.
Change-Id: I7a0bdf60d89b5166c9a22c9e9f3f326b28f777b8
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4584
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I8da04df024a31c780b924a586d056a5351845153
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4773
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Also pass V=1 to the configuration step, if requested.
Change-Id: If8b413d65d6bac34efab63614d039d74d920c8db
Reviewed-on: http://review.coreboot.org/5492
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This causes coreboot to call the keyboard initialization code for the
KBC. This is only needed for payloads which do not initialize the
keyboard.
Change-Id: Id0bb77f2a8115fafc0cd6165a8431a7e07f0fac1
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5514
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Following the same reasoning as commit
ee905a8 vendorcode/amd/agesa/fam15tn: Build as a static library
Since AGESA is stage-independent, we can build it just once, and use
the resulting static library in both rom and ram stages.
Change-Id: I8b78c462f4963fbb3a40d739196529fffedccb4c
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5441
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Following the rational of:
5188d40 jetway/nf81-t56n-lf: Use hexdump() for dumping ACPI tables
Use "Debugging -> Output verbose ACPI debug messages" in menuconfig to
toggle.
Change-Id: Ibf03ef916a789d0f049190755213ba93191d4662
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5507
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Turns out we have a CONFIG_DEBUG_ACPI definition under:
Debugging -> Output verbose ACPI debug messages
Hence, let us make use of this definition.
Change-Id: I1b673feb6d9b2ee51c832a1cef159cd80e5c3517
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5506
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Keep under 80 colums and Doxygen'ify inline documentation somewhat.
Strip some whitespace bulk while here and refactor a little as to line
wrap.
Additionally, following the reasoning of:
0b2fa34 hp/pavilion_m6_1035dx/buildOpts.c: Remove commented out tables
remove some fluff from buildOpts.c
Change-Id: Icb38f087724d3e3511df1d554a620eb637ce286a
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5481
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Try to conform to some kind of standard/consensus for prototype
location. Correct headers while here.
Change-Id: Ie99b1801fa42ddefb9f25d54f326ba7131bd7089
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5499
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Just like in commit
* 1d87dac hp/pavilion_m6_1035dx: Sanitize #includes
Include AGESA headers specifying the path relative to AGESA_ROOT. The
path is specified relative to AGESA_ROOT as opposed to src/ since this
code may include headers from different AGESA families, depending on
the board.
Change-Id: Ide38cc34e207a8b617d1d319fd9c17a785f55833
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5423
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Up until now, we were building AGESA by specifying each AGESA source
file and adding it to the list of romstage and ramstage source files.
As a result, we were compiling each AGESA source twice, despite the
fact that it does not depend on the stage we're in.
Since AGESA is stage-independent, we can build it just once, and use
the resulting static library in both rom and ram stages.
We still keep the practice of specifying every single AGESA directory
as an include dir and adding the AGESA CFLAGS to our global CFLAGS;
this is needed due to the way AGESA builds.
Change-Id: I9b23264129d1c08cb67cabc31d15a68d43ed7624
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5430
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Change-Id: I07725b71508c8b08451022307ae934c1b227f7f9
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5491
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Use hexdump() instead of a local implementation for dumping ACPI_TABLES.
Change-Id: I20354a4f9dff4105de5af696bb9da4a4f6cca788
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5466
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Not all boards which use the AMD Hudson southbridge have IDE. However,
the southbridge's asl included an 'ide.asl' file which had to be
present in $(mainboard_dir)/acpi.
Address this issue by removing the inclusion of 'ide.asl' from the
southbridge 'fch.asl' and remove 'ide.asl' from Hudson boards, none
of which have IDE.
If future hudosn board will come with IDE, the device can be declared
in the PCIO scope of dsdt.asl, right below the inclusion of 'fch.asl'.
Change-Id: Ie2efb7ebf8f5b527e26d7aaaeafbd3053a9a6b28
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5459
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Follow along hudson, cut out "SLP_TYP type was 0" excessively filling
the buffer. We could make this conditional on non-zero?
Change-Id: Iffd4c146b2ac4f57dbc3a011a683c92b6e132e39
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5495
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The EC is now set to ACPI mode, and properly generates SCIs on
external events. This fixes the issue where battery notifications were
not working.
The keyboard matrix type is also explicitly set up.
Change-Id: Ib6f0d23984d4ed1320340282469b8325c83547d1
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5471
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Not all boards which use the AMD cimx/sb800 southbridge have IDE.
However, the southbridge's asl included an 'ide.asl' file which had to
be present in $(mainboard_dir)/acpi.
Address this issue by including ide.asl only in boards which have IDE,
and remove it from all other cimx/sb800 boards.
Change-Id: I57fcb4db9f85234b05ae1705ef81a576c478cee6
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5460
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Serialize methods against the construction of same (named) objects by
competing threads. See ACPICA BZ 909 for further details.
This change fixes issues that show up with the Ubuntu firmware test
suite (fwts) ACPI table sanity checker.
Change-Id: I49e3050a2a5aece6f031122b0211c056938d1a89
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5458
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Following the same reasoning as in commit
* 1d87dac hp/pavilion_m6_1035dx: Sanitize #includes
include AGESA files with a path relative to AGESA_ROOT. We cannot
with more than one generation of AGESA, hence the path being relative
to AGESA_ROOT.
Change-Id: If15c4cbfd42e0264264fdb3e8c426a47609ad41f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5426
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Try to use void and uint*_t type specifiers in place of VOID and UINT*
respectively. Use const in place of CONST type modifier. Remove some
useless type casts.
A few unneeded comments containing the AGESA redefenied types are also
removed.
Change-Id: I4bff96a222507fc35333488331c3f35ef1158132
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5486
Tested-by: build bot (Jenkins)
|
|
Replace usage of AGESA poor reinvention of memset/memcpy functions with
the usual standard ones.
Change-Id: Ibfe9ee253d57140b06a4fca6b47b2051308ad012
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5484
Tested-by: build bot (Jenkins)
|
|
This is sufficient to at least allow linux to recognize the lid switch
and read its state correctly.
Change-Id: Id5bd92466c72559f263c7ca8d23cbc741377a762
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5464
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Only the WLAN control pin and the lid switch input are declared, as
those are the only pins whose function is known and tested.
Change-Id: Ia5871882884ba9bb6d63418b34e33f92ead669eb
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5463
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Hook in the EC ASL code. This provides just enough information for the
OS to be able to read the battery information.
EC notifications (_Qxx) do not yet work, and it is unclear if the
issue is in the ACPI code, or if the EC is not set up properly. Thus,
the OS must boot with the battery inserted in order to be able to read
its status.
The _L03 ACPI method is also removed, as the EC SCI uses this event.
Change-Id: I85cbaeb9c77e60bd1c68d928412f897de50c6329
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5445
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
The GP15 ACPI object was used to get the state of the lid. However
GP15 is specific to certain Intel chipsets, and will not always be in
the ACPI namespace. Instead of hardcoding this object, let the
mainboard define it.
Also, document the ACPI interface for the EC.
Change-Id: I02a2eb3116af61ea5701f84507327aa40218597a
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5444
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Otherwise we generate a recursive dependency because
CPU_AMD_AGESA depends on the per-family configurations
while those only exist if CPU_AMD_AGESA is selected.
Change-Id: Ic08d517ff4ca8bb76afc1574b55c54b28ec3f1b0
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5490
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
These are the .h and .c files from Intel that support interaction
with the FSP. These have been modified from the FSP distribution
only to strip trailing whitespace.
Intel® Firmware Support Package for Intel® Atom™ Processor C2000
Product Family (Formerly Rangeley)
"Intel® Firmware Support Package (Intel® FSP) provides key
programming information for initializing Intel® silicon and can be
easily integrated into a boot loader of the developer’s choice.
It is easy to adopt, scalable to design, reduces time-to-market, and
is economical to build."
http://www.intel.com/fsp
Change-Id: I9ed94cb92909c3681cc88bf10b85a9ba25e8fc55
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/5457
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
These are the .h and .c files from Intel that support interaction
with the FSP. These have been modified from the FSP distribution
only to strip trailing whitespace.
Intel® Atom™ processor E3800 product family (formerly Bay Trail)
"Intel® Firmware Support Package (Intel® FSP) provides key
programming information for initializing Intel® silicon and can be
easily integrated into a boot loader of the developer’s choice.
It is easy to adopt, scalable to design, reduces time-to-market, and
is economical to build."
http://www.intel.com/fsp
Change-Id: I0fa64dbaf640493cdb5e670e8d213a49d9e7dcfb
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/5456
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
These are the .h and .c files from Intel that support interaction
with the FSP. These have been modified from the FSP distribution
only to strip trailing whitespace.
Intel® Firmware Support Package for Intel® Xeon® E3-1125C v2,
E3-1105C v2, Intel® Pentium® Processor B925C, and Intel® Core™
i3-3115C Processors for Communications Infrastructure with
Intel® Communications Chipset 89xx Series Platform Controller Hub
(formerly Crystal Forest Refresh: Ivy Bridge Gladden and Cave Creek
"Intel® Firmware Support Package (Intel® FSP) provides key
programming information for initializing Intel® silicon and can be
easily integrated into a boot loader of the developer’s choice.
It is easy to adopt, scalable to design, reduces time-to-market, and
is economical to build."
http://www.intel.com/fsp
Change-Id: Ib76e89b2d2f6407cf55a5a664da989c7a7e0eb23
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/5455
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Other FSPs have more than just the initial fsphob.c source file.
Add any .c files in the srx directory to the ramstage build.
Change-Id: I5118bdcca44935b579809c4fc9566ab7914a6e4b
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/5454
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
GP0e does not fit into the naming scheme of the field units surrounding
this field unit definition. Also the keys for e and 3 are close to each
other supporting the theory that this is indeed a typo.
Change-Id: I43cf288fe1e0240b33971073c1aa8a1db5762e31
Reported-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5483
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The ROM address range is set up in the LPC PCI device, register 0x6c.
Coreboot already sets that up correctly in the bootblock, however
AGESA overrides that to 0xffffff00, which will always map the ROM from
0xff000000. This may conflict with other devices which are assigned
address space in that range.
If a device is assigned a range between 0xff000000 and the real ROM
base, accesses to that device will be diverted to the system ROM,
regardless of how other BARs are set up. Since we already need to set
up the ROM address range in the bootblock, before calling AGESA, just
remove the override from AGESA.
Note that not all AGESA versions override this mapping.
Change-Id: I592e5d087ed830c9604a04a356912c7654ce56d2
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5467
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
According ACPI specification:
"""
The \_PIC optional method is used to report to the BIOS the current
interrupt model used by the OS. The argument passed into the method
signifies the interrupt model OSPM has chosen, PIC mode, APIC mode,
or SAPIC mode. Notice that calling this method is optional for OSPM.
If the method is never called, the BIOS must assume PIC mode.
Arguments: (1)
Arg0 – An Integer containing a code for the current interrupt model:
0 –PIC mode
1 –APIC mode
2 –SAPIC mode
"""
In current configuration with default value of interrupt model
PMOD equal 1 (APIC mode), Linux can't boot with "noapic" option.
Kernel never call _PIC method and PMOD stays equal 1, indicatind
that APIC routing objects should be evaluated. This mix of PIC
and APIC leads to boot fail.
Change default value of interrupt model PMOD to 0, for correct
"noapic" boot.
Change-Id: I7fa6f0c24802751202ed2e7f13411001a600e772
Signed-off-by: Konstantin Aladyshev <aladyshev@nicevt.ru>
Reviewed-on: http://review.coreboot.org/5473
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Step 2: change the Lenovo X230 code to adapt it to the new board's
hardware with the great guidance from Vladimir (phcoder) to find the
correct GPIO's.
The machine has:
- Chipset: Intel QM77
- GPU's: Intel Integrated HD Graphics
: Discrete NVIDIA NVS 5400M (1 GB VRAM) with Optimus Technology
Change-Id: Iee12c3edc22df4a7935b7fb7ff4a320c21c4239b
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5391
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Step 1: copy all files unmodified from Lenovo X230. This makes it much
easier later to see how the two boards actually and deliberately differ
when porting bugfixes from one to the other.
Change-Id: I3151c7848440ea6c240b959379a8eb369d35f3de
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5390
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I61e55601676c0825815d6520a874ccade8942379
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/5362
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The SerialIO DwordIo() definition is fixed up before returning
it in the serialio device _CRS method, so the values that are set
in the raw ASL are not actually used.
However modern versions of IASL do not like that the RangeLength is
set to zero and will fail to compile. Set this value to 1 to make
IASL stop complaining, but the real value is still fixed up in _CRS
so this has no real effect on the end result.
Change-Id: Iceb888e54dd4d627c12d078915108a11f45b1a2d
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5182
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Removing `-Wno-unused-but-set-variable` from `CFLAGS` results in the error
below, when building for example the HP DL145 GL1.
CC southbridge/amd/amd8111/acpi.ramstage.o
src/southbridge/amd/amd8111/acpi.c: In function 'acpi_init':
src/southbridge/amd/amd8111/acpi.c:100:11: error: variable 'dword' set but not used [-Werror=unused-but-set-variable]
Removing the variable `dword` fixes this error.
The read is left in the code, as I do not know if it has an effect or
not.
Change-Id: I9957cef3a996c5974c275423c9de63ccf230974e
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5315
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Do this for symmetry with romstage_console.c.
Change-Id: If17acfc3da07b1dbefa87162c3c7168deb7b354a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5330
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
No longer needed as wrap_putchar() survives SMM relocation to TSEG.
Change-Id: I6143844b0b9902ef63baf3e5781a5dc4f54234be
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5335
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
We do not need ROMCC support here and using wrappers for
console_tx_byte we can simplify this code.
Change-Id: I7f3b5acdfd0bde1d832b16418339dd5e232627e7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5334
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This gives us completely transparent low-level function to transmit
data.
Change-Id: I706791ff43d80a36a7252a4da0e6f3af92520db7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5336
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Do not expose console_tx_flush() to ChromeOS as that function
is part of lower-level implementation.
Change-Id: I1e31662da88a60e83f8e5d307a4b53441c130aab
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5347
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: I7bdc468bc3f74516abb2c583bdb5b6d7555d987c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5333
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: I6c50e47d9d2d0d1f42beee477e49b2a0054d1786
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5332
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Splitting the version prompt satisfies some requirements ROMCC
sets for the order in which we include source files. Also GDB
stub will need console hardware before entering main().
Change-Id: Ibb445a2f8cfb440d9dd69cade5f0ea41fb606f50
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5331
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This driver is only a thin shell for uart8250mem and we could extend it
with further compatible PCI IDs from other vendors/brands.
Change-Id: Ic115b1baa0be0dbaa81e4a17a2e466019d3f4a67
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5329
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
None of the PCI bridge management here is specific to the PCI UART
device/function. Also the Kconfig variable defaults are not globally
valid, fill samsung/lumpy with working values.
Change-Id: Id22631412379af1d6bf62c996357d36d7ec47ca3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5237
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Option DRIVERS_UART builds with support for UART hardware.
Option CONSOLE_SERIAL enables the console output for UART.
Those x86 boards that do not have serial port on SuperIO should select
NO_UART_ON_SUPERIO to disable 8250 UART for the default configuration.
Removes:
CONSOLE_SERIAL_UART
HAVE_UART_IO_MAPPED
HAVE_UART_MEMORY_MAPPED
Renames:
CONSOLE_SERIAL8250 -> DRIVERS_UART_8250IO
CONSOLE_SERIAL8250MEM -> DRIVERS_UART_8250MEM
Change-Id: Id3afa05f85c0d6849746886db8b6c2ed6c846b61
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5311
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Also fixes the reported baudrate to take get_option() into account.
Change-Id: Ieadad70b00df02a530b0ccb6fa4e1b51526089f3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5310
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Prepare low-level register access to take UART base address as a
parameter. This is done to support a list of base addresses defined
in the platform.
Change-Id: Ie630e55f2562f099b0ba9eb94b08c92d26dfdf2e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5309
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I0b40c9811115b204f1cae70546d236049c1b3d30
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5431
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Follow same reasoning as:
12fd779 hp/pavilion_m6_1035dx: Simplify agesawrapper_amdinitcpuio()
Use coreboot variants for PCI and MSR access over AGESA's.
Change-Id: Ic0d8bbd0faf6423605567564ad216b79e1331cc9
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5472
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I7ffa8e8f807e7d8a778eb80c12a0dc984bdb3f8b
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5470
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I181da410490a92760ae1328a4286e805f5388886
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5462
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
_PIC method should be declared under root scope (\_PIC),
otherwise Linux kernel doesn't use it.
Change-Id: I29b6ca60191507ac8edf99fdf173617bd6446934
Signed-off-by: Konstantin Aladyshev <aladyshev@nicevt.ru>
Reviewed-on: http://review.coreboot.org/5478
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
TRIVIAL. Rather than using the AGESA functions for PCI and MSR access,
use the coreboot variants, which are cleaner and more readable.
Change-Id: I4f24820606900e16f0d159df019f4560f1592489
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5468
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
This fixes a double free crash that occurs when a call to
cbfs_image_from_file() fails in cbfs_extract() and falls though to
cbfs_image_delete() with a NULL-pointer.
To reproduce the crash pass the following arguments where the files
passed, in fact, do not exist. As follows:
./cbfstool build/coreboot.rom extract -n config -f /tmp/config.txt
Change-Id: I2213ff175d0703705a0ec10271b30bb26b6f8d0a
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5353
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Introduce the tunable CONFIG_SEABIOS_THREAD_OPTIONROMS.
Change-Id: Ifd4d9fca7316eb739ff184e54bdc1cdb0262f0c6
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/5443
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This removes ominous "PCI: xx:xx.x not found" messages from coreboot
console.
Change-Id: I13a6f2497c04464e8dd0c4c5e7f40a1582f7f26c
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5461
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Based on the same reasoning as this commit:
1d87dac hp/pavilion_m6_1035dx: Sanitize #includes
Change-Id: I383f79b5392ee1ca244e403f755213fa7b32c0af
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/5420
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
The previous SBxxx generations were setting up LPC bridge based
on the PNP resources. Implement it also for AGESA Hudson.
The AGESA itself opens one big region DFLT_SIO_PME_BASE_ADDRESS
(512 bytes). Make the code smart enough to detect already used
region and if any resource fits into AGESA defined region, do nothing.
Change-Id: I718d034bc4c778697a7bd0506d4550c8f5a43159
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Reviewed-on: http://review.coreboot.org/4497
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Following the same reasoning as commit
d304331 superio/fintek/f81865f: Avoid .c includes
Clean up the early_serial #include directives in mainboard/romstage
code.
Change-Id: I1f7c20ac7841874125b6bfcd9f9db25d96355881
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5449
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Following the same reasoning as commit
1d87dac hp/pavilion_m6_1035dx: Sanitize #includes
Clean up the #include directives in this board support.
Change-Id: I97b73a349ca7e49b413d7c04900f25076488dde4
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5414
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Following the same reasoning as commit
d304331 superio/fintek/f81865f: Avoid .c includes
Clean up the early_serial #include directives in mainboard/romstage
code.
Change-Id: I14c438968bfed917977862efd8a393ec48cb04c9
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5446
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Following the same reasoning as commit
d304331 superio/fintek/f81865f: Avoid .c includes
Clean up the early_serial #include directives in mainboard/romstage
code.
Change-Id: Ib3a12fb8160729008bdaa8026365675a11325da0
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5448
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Needed types were being guarded by CONFIG_CHROMEOS_RAMOOPS.
Expose those unconditionally.
BUG=None
BRANCH=None
TEST=None
Change-Id: Ie858c746307ad3669eab5c35bf219e1a58da2382
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/188714
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5453
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This is useful, for example, when using stage-independent code, as it
allows us to compile that code only once. It's also useful for vendor
code which needs wonky compiler definitions and include paths which
we'd rather not include in the other files.
Subsequent patches will make use of this when lib-izing AGESA.
Change-Id: Ifb0c5d353bf09d23864270b9eefb6b75fd86e6cb
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5425
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
|
|
There were a number of things wrong with the includes. First, The
includes did not use paths to AGESA files, thus relying on the
compiler include paths to find the correct file. This made it unclear
where the file included was located, and whether it was local, under
vendorcode, or under a different directory. Instead, use full paths
for each non-local include.
Second, the local includes were mixed with the rest, making it unclear
which file is local and which one is not. Keep the local includes at
the top. This also prevents us from polluting the namespace of local
headers, with library definitions, and allows us to catch if we missed
an otherwise needed external header.
Thirdly, alphabetize the order of includes where possible.
Change-Id: I22c543291beabb83c16d912ea0a490be6ca4e03c
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5412
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
For romstage, console_init() was called twice. The one in dock_connect()
should have done only UART programming and not touch CBMEM console and/or
USBDEBUG when those are enabled.
Second case where dock_connect() is called is in SMI handler.
If DEBUG_SMI is not enabled, console_init() does nothing in SMM.
If DEBUG_SMI is enabled, console_init() is already called every time when
enterining SMM.
Change-Id: Ib3a842442cb7a5be9d6b71682cd6f368930af886
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5433
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Clang does not like inline functions defined in C files with prototypes
in headers. Rather Clang expects inline function bodies to be in headers
if they are to be used out of scope. Since inline is purely advisory to
the compiler, drop its usage here.
Change-Id: I08a7a3d2cdf841ffbab10c017c75917768aac209
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5429
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
|
|
In some cases the cbmem console can be larger than the default
mapping size of 1MiB. Therefore, add the ability to do a mapping
that is larger than the default mapping using map_memory_size().
The console printing code will unconditionally map the console based
on the size it finds in the cbmem entry.
Change-Id: I016420576b9523ce81195160ae86ad16952b761c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5440
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Following the same reasoning as commit
d304331 superio/fintek/f81865f: Avoid .c includes
Clean up the early_serial #include directives in mainboard/romstage code.
Change-Id: I3577ca3f761fb699dc51141a02e1f853bf1f1a21
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5417
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Following the same reasoning as commit
d304331 superio/fintek/f81865f: Avoid .c includes
Clean up the early_serial #include directives in mainboard/romstage code.
Change-Id: Id8a1a2e8c87add636af1506598c2669d72dc3238
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5437
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Following the same reasoning as commit
d304331 superio/fintek/f81865f: Avoid .c includes
Clean up the early_serial #include directives in mainboard/romstage code.
Change-Id: Ia021229154dc90b830a314f3adc2a0dd444bd68d
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5436
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Following the same reasoning as commit
d304331 superio/fintek/f81865f: Avoid .c includes
Clean up the early_serial #include directives in mainboard/romstage code.
Change-Id: I863c16634873224c17e43100271e9b91419724d0
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5435
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Following the same reasoning as commit
d304331 superio/fintek/f81865f: Avoid .c includes
Clean up the early_serial #include directives in mainboard/romstage code.
Change-Id: Ibf743f7a5dd4a424a4513014fc9a896b87ecf3b1
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5434
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The timer_fsb variable was not correctly being accessed in the
presence of cache-as-ram. The cache-as-ram backing store could
be torn down but then udelay() could be called causing hangs from
accessing variables that have unknown values.
Instead change the timer_fsb variable to g_timer_fsb and obtain
the value through a local access method that does the correct things
to obtain the correct value.
Change-Id: Ia3e30808498cbe4a7f6f116c17a8cf1240a807a3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5411
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
|
|
Use of CAR_GLOBAL is not safe after CAR is torn down, unless the
board properly implements EARLY_CBMEM_INIT.
Flag vulnerable boards that only do cbmem_recovery() in romstage on S3
resume and implementation with Intel FSP that invalidates cache before
we have a chance to copy the contents.
Change-Id: Iecd10dee9b73ab3f1f66826950fa0945675ff39f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5419
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
It's _local_
Change-Id: I5624e240ffe486763b25b14b218e69362c488f50
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5432
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
We should not be #include .c files, instead link early_serial into
romstage and provide a prototype.
Change-Id: Ia9277169ce1592e1fc72f8849f0982741daec567
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5416
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
This step needs to be done before calling any MMC functionality.
Change-Id: I88763072c8a541ddba794e79fb55e82eb2f187a9
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4745
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
This was a pathetically easy port, where all the components are
already supported. This is basically a verbatim copy of amd/parmer.
The EC is an ENE KB932, which is a part that does surprisingly little
for an EC. This also means we need almost no code to get it working.
I've "select"ed the EC in Kconfig, which is the only difference from
parmer, although the keyboard worked fine without it.
I haven't coupled in the ACPI code from the EC yet, so battery level
is not readable from the OS. Hotkeys work except for brightness
control, and the CapsLock LED blinks at regular intervals instead of
following the CapsLock key.
Change-Id: Idfec6f848b99a52e73eac22d516f3550477ad822
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5409
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
