summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-19configs: Build test experimental x86_64 codePatrick Rudolph
Add additional build config to test qemu-i440fx x86_64 code. Change-Id: I63f7a6e1602728e4d5ff67f9bd702efebe315c16 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31472 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-19mb/emulation/qemu-q35,qemu-i440fx: Add x86_64 supportPatrick Rudolph
* Enable optional x86_64 romstage, postcar and ramstage * Add Kconfig for x86_64 compilation * Add documentation for x86 qemu mainboards * Increase CAR stack as x86_64 uses more than 0x4000 bytes Working: * Boots to Linux * Boots to SeaBIOS * Drops to protected mode at end of ramstage * Enumerates PCI devices * Relocateable ramstage * SMM Change-Id: If2f02a95b2f91ab51043d4e81054354f4a6eb5d5 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29667 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-19cpu/x86/64bit/exit32: Add support for ramstagePatrick Rudolph
When compiled in RAMSTAGE use the segments for ramstage. Allows to call this assembly code in ramstage to exit long mode. The next commit makes use of this. Tested on qemu: Still boots on x86_64. Change-Id: I8beb31866bd15afc206b480b1ba05df995adc402 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44504 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-08-19arch/x86/boot: Jump to payload in protected modePatrick Rudolph
* On ARCH_RAMSTAGE_X86_64 jump to the payload in protected mode. * Add a helper function to jump to arbitrary code in protected mode, similar to the real mode call handler. * Doesn't affect existing x86_32 code. * Add a macro to cast pointer to uint32_t that dies if it would overflow on conversion Tested on QEMU Q35 using SeaBIOS as payload. Tested on Lenovo T410 with additional x86_64 patches. Change-Id: I6552ac30f1b6205e08e16d251328e01ce3fbfd14 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-19cpu/ti/am335x: Move from cpu to soc in treeSam Lewis
The AM335X is a SoC, so should be in the soc tree. This moves all the existing am335x code to soc/ and updates any references. It also adds a soc.c file as required for the ramstage. Change-Id: Ic1ccb0e9b9c24a8b211b723b5f4cc26cdd0eaaab Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-08-19arch/arm: Enable FIT payloadsSam Lewis
Implements fit_payload_arch for the arm (aarch32) architecture, so that FIT images can be used. The implementation is very similar to the existing implementations for arm64 and riscv, and has mostly been lifted from these other ports. TEST: Booted Beaglebone Black (in progress port, to be submitted soon!) with a FIT image containing a 5.4 kernel, dtb and initramfs. Change-Id: I6b50c6f06b83c00a5b3622b5bbafe67130b6d233 Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44377 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-08-19mb/google/volteer: Update settings for trackpad on HalvorJohn Su
Configure gpio settings for trackpad. BUG=b:153680359 TEST=FW_NAME=halvor emerge-volteer coreboot chromeos-bootimage Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I525ba688f71b7a1893bcb64c77e02c8e2506d7b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44524 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-19soc/amd/picasso: log and print GPIO wake eventsAaron Durbin
Capture the GPIO subsystem wake state and add events to the eventlog. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I7f10bf4599ea7928cc87b6b10ac11a7c30e58406 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44535 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-19soc/amd/common: add gpio subsystem event reportingAaron Durbin
In order to log gpio events for wake purposes the state of the gpio subsystem should be snapshotted. Add the ability to capture state of gpio subystem as well as saving up to 16 gpios that indicate their wake status. Likewise, provide the eventlog additions based on state. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I49fca56c87543aa8aad0eb7da5c5cb570c4349d5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44534 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-19soc/amd/picasso: Use cbfs to locate the AMD firmwareMartin Roth
Switch from locating the AMD firmware in the RW_A & RW_B regions with their hardcoded locations to using CBFS to find them. They still need to be at the hardcoded locations so that we can set the location inside the binary, but instead of just setting the pointer directly to them, we now search for them with cbfs. BUG=b:154441227 TEST=Boot & verify that binaries are located in both RW-A & RW-B Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I27b0593e0db7a9e6ba9b0633ac93b4d93954f002 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42831 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-19soc/amd/picasso: Remove now unused #defineMartin Roth
This #define wasn't removed when the tests were removed, so get rid of it now. BUG=None TEST=Build Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Ie0005b6ee97037bf3dfb80f0c2408d8bd9ee9633 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44537 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-08-19mb/google/zork: remove unused asl files for dirinbozKevin Chiu
BUG=b:161579679 BRANCH=master TEST=1. emerge-zork coreboot chromeos-bootimage 2. power on proto board successfully Change-Id: I713ac3a47c2d47035affb32e6c604b9af23aa90e Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-19mb/google/zork: Adjust Dirinboz I2C valuesKevin Chiu
BUG=b:164757545 BRANCH=master TEST=1. emerge-zork coreboot chromeos-bootimage 2. power on proto board successfully 3. measure i2c freq by scope is close to 400kHz Change-Id: Icb27ff8a4960caaebc542ee4e507f1611da5a77e Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-18mb/amd/mandolin: enable SoC UARTs 0 and 1 and disable 2 and 3Felix Held
There are only headers for the SoC's UART 0 and 1 on the board. BUG=b:165020060 TEST=Linux only detects UART 0 and 1. Change-Id: I45929f65a5f844ae5cef792b11176f487c80766f Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44530 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18mb/amd/mandolin: select ACPI driver for internal memory mapped UARTsFelix Held
In order for Linux to find and use the SoC's integrated UARTs, they need to be exposed in ACPI. BUG=b:165020060 TEST=Linux detects the SoC's integrated UARTs. Change-Id: Iaa66657b88f62b2067c865c3e1945b7bdbf9be23 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44529 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-18mb/amd/mandolin: use SoC UART for console if LPC UART isn't presentFelix Held
Using the SOC's UART 0 as console requires moving a few resistors on the Mandolin board. BUG=b:165020060 TEST=coreboot console works on SoC UART 0 when AMD_LPC_DEBUG_CARD isn't selected. Change-Id: Idaf73ae84f54028da2182ce42035f9ecd63f4776 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-18mb/google/zork: Clean up bt reset_gpio removalRob Barnes
Clean up of bt reset_gpio removal function. TEST=Boot and observe log showing bt reset_gpio was removed BUG=b:157580724 - Add reset_gpio for Bluetooth Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I1d40ad16dd3c624d4be89d9eea1835cc4e72c03d Reviewed-on: https://review.coreboot.org/c/coreboot/+/44273 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18documentation: Add documentation for Purism Librem MiniMatt DeVillier
Change-Id: Ie5699942f48d2d5b1417f447a9a36b98e4b18156 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42882 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18soc/amd/picasso: fix GPE snapshot stateAaron Durbin
In CB:44488 the cbmem addition was re-filling the object when it should be memcpy()ing from static object. Correct that oversight. The side effect from the previous implementation would be if FSP-M modified the GPE state. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I158a89ae28431896fa9b5789292000fcbf0b066d Reviewed-on: https://review.coreboot.org/c/coreboot/+/44533 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18elog: add ELOG_WAKE_SOURCE_GPIOAaron Durbin
Provide a GPIO-based wake source event for log caputre. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Iaa15178a392f40156d8d10e9aedfd5a1e758eedb Reviewed-on: https://review.coreboot.org/c/coreboot/+/44532 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18mb/google/volteer: Configure DP_HPD as PAD_NC and disable DdiPortHpdJohn Zhao
GPP_A19(DP_HPD1) and GPP_A20(DP_HPD2) were configured native function (NF1) without internal pull-down which wrongly presents HPD interrupts. DP_HPD had been removed for EVT design as those events are through eSPI. This change configures GPP_A19 and GPP_A20 to be no connection and disables DdiPort1Hpd and DdiPort2Hpd. BUG=b:162566436 TEST=Booted to kernel and verified no kernel HPD pins assertion message on Volteer EVT board. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Ia3245741b776b75073d2b43d36c8ea40b476b3ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/44501 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18elog: rename ELOG_WAKE_SOURCE_GPIO to ELOG_WAKE_SOURCE_GPEAaron Durbin
The wake source macro for GPE events was using 'GPIO'. However, current usage is really all GPEs. Therefore, provide clarity in the naming in order to allow for proper GPIO wake events that are separate from the ACPI GPE block. BUG=b:159947207 Change-Id: I27d0ab439c58b1658ed39158eddb1213c24d328f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-18mb/google/dedede: Fix S3 wake using trackpadMeera Ravindranath
Configure TRACKPAD_INT_ODL pad reset config to DEEP and map PMC_GPE_DW to PMC_GPP values. TEST=System should wake from S3 via trackpad Change-Id: I58ce3720e0fdeefb2c9440bb3006897ef80211ea Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-08-18soc/intel/jasperlake: Fix PMC_GPE_DW mappingMeera Ravindranath
PMC_GPE_DW mapping was not configured correctly and hence coreboot skipped programming Tier 1 GPIOs resulting in failure of S3 wake from Trackpad. TEST=System should wake from S3 via trackpad Change-Id: I59ce3720e0ffeefb2c9440bb300689def80211ea Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-08-18soc/intel/jasperlake: Increase PRERAM_CBMEM_CONSOLE_SIZE to 5KBMeera Ravindranath
Increase the cbmem console size from 3KB to 5KB in order to fix console overflow. Change-Id: Id7eb64feb91ec29df5402b2fb1bac3ff73cc5bb3 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44326 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18crossgcc: Upgrade LLVM to version 10.0.1Elyes HAOUAS
Change-Id: I1d96654fd66a5972c6c5cc24311ca2d889866331 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39921 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18src: Remove unused 'include <delay.h>'Elyes HAOUAS
Change-Id: I6afea5c102299e570378a1656d3dcd329a373399 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44093 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18src: Remove unused 'include <lib.h>'Elyes HAOUAS
Change-Id: Ic09fc4ff4ee5524d89366e28d1d22900dd0c5b4d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18src: Remove unuse '<timestamp.h>Elyes HAOUAS
Change-Id: I4fa03c4576bb0256b73f1d36ca840e120b750a74 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18src: Remove unused '<halt.h>'Elyes HAOUAS
Change-Id: I3037edf89c933f4f136ca61d6a5bce41126ec6b9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18src: Remove unused '<option.h>'Elyes HAOUAS
Change-Id: Icb79d60e9ec70a0780d5231698b88cff1db72c9b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18soc/intel/common/block/pmc/pmclib.c: Remove unused '<pc80/mc146818rtc.h>'Elyes HAOUAS
Change-Id: If7e99e1b1be38694ad2fedb528a5c1725b968943 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44096 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18sb/amd/agesa/hudson: Add missing '#include <stddef.h>'Elyes HAOUAS
size_t needs <stddef.h>. Change-Id: I9ccf526df44dbad8568f75bd0506ac686fdb7860 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43939 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18src: Remove unused 'include <stddef.h>Elyes HAOUAS
Change-Id: Iae1e875b466f8a195653d897efa1b297c61ad0a5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41912 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18src: Remove unused 'include <boot_device.h>'Elyes HAOUAS
Change-Id: I5589fdeade7f69995adf1c983ced13773472be74 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42349 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18sb/intel/lynxpoint/early_pch.c: Use common 'write_pmbase16()'Elyes HAOUAS
Change-Id: I1a70eea8c4f835e5673e75282c9cecb24b150e3d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18src/southbridge/amd/*/*/fadt.c: Use macro for access_sizeElyes HAOUAS
Change-Id: I316abf6626adabeecdf9639712ab3bf64e3cbe83 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18cpu/intel/common: Use macro for access_sizeElyes HAOUAS
Change-Id: I0388ac41403ff03943c91ba19f6527e7d77e0139 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18src/acpi/acpigen.c: Use macro for access_sizeElyes HAOUAS
Change-Id: I677d055b3cd47f760d743a6ecb63cb5738274090 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42727 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18sb/intel/{i82371eb,i82801dx}/fadt.c: Use macro for iapc_boot_archElyes HAOUAS
Change-Id: Ie5e44be06da8a84c9cff42e07af1a7387faad533 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18src: Remove unneded whitespace before tabElyes HAOUAS
Also remove unneded tab in 'picasso/Makefile.c' file. Change-Id: Id25b2d308645c449c205b3a946f89b6b6de62a47 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44441 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18crossgcc: Upgrade CMake to version 3.18.1Elyes HAOUAS
Release Notes: https://cmake.org/cmake/help/v3.18/release/3.18.html Change-Id: I20b75b7c29be838c3c168547bcab25ea5c1af462 Signed-off-by: Griffin98 <griffin98@protonmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18payloads/nvramcui: Fix `make clean`Nico Huber
After `make clean` a new build should not be based on stale artifacts. Hence we have to remove them. Change-Id: I540a83a6c87b843b1c4c9c55990bf3e91fe90d79 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-18payloads/coreinfo: Fix `make clean`Nico Huber
After `make clean` a new build should not be based on stale artifacts. Hence we have to remove them. Change-Id: I18292c674986078d991668124193b6aa31234d47 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44179 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-18xeon_sp/cpx: Fix get_system_memory_map to return the correct addressJohnny Lin
Similar to commit b45ed65, the HOB structure is actually a 8 byte address pointing to the HOB data. Tested=Verified the values of the hob fields are the same printed by soc_display_memmap_hob(). Change-Id: I348d3cd80a56e86d22f20fcadf0316b462b86829 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-18cpu/x86/smm/smm_stub: Add x86_64 supportPatrick Rudolph
Enable long mode in SMM handler. x86_32 isn't affected by this change. * Enter long mode * Add 64bit entry to GDT * Use x86_64 SysV ABI calling conventions for C code entry * Change smm_module_params' cpu to size_t as 'push' is native integer * Drop to protected mode after c handler NOTE: This commit does NOT introduce a new security model. It uses the same page tables as the remaining firmware does. This can be a security risk if someone is able to manipulate the page tables stored in ROM at runtime. USE FOR TESTING ONLY! Tested on Lenovo T410 with additional x86_64 patches. Change-Id: I26300492e4be62ddd5d80525022c758a019d63a1 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Eugene Myers <cedarhouse1@comcast.net>
2020-08-18util/intelp2m: Add support for Cannonlake-LP SoCsMatt DeVillier
Add support for Cannonlake-LP SoCs (Whiskeylake-U, Coffeelake-U, Cometlake-U) as a separate parsing profile, copying the existing 'Sunrise' profile and adjusting for differences in reset mapping and GPIO macro generation Test: convert inteltool GPIO log dump into coreboot macros for an out-of-tree CML-U board. Change-Id: I86296697ee892af7aa0818fb608b6d68fad2f307 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-08-18mb/purism/librem_whl: Add new board Librem Mini (WHL-U)Matt DeVillier
Add new librem_whl baseboard and Librem Mini variant. Tested with SeaBIOS, Tianocore, and Heads payloads. All functions working normally except SATA, which is limited via a FSP UPD to 3Gbps until the correct HSIO PHY settings can be determined. https://puri.sm/products/librem-mini/ Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I36af42766f85eb17f86f6ec9b48b87125fb911e6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-18xeon_sp/cpx: Enable ACPI P-state supportJingle Hsu
Implement ACPI P-state support to enable driver acpi_cpufreq. This patch leverages code from the Skylake project. Tested=On OCP Delta Lake cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies 1501000 1500000 1400000 1300000 1200000 1100000 1000000 900000 800000 Change-Id: I3bf3ad7f82fbf196a2134a8138b10176fc8be2cc Signed-off-by: Jingle Hsu <jingle_hsu@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-18soc/intel/jasperlake: Configure IPU based on devicetreeMaulik V Vaghela
FSP enables IPU (Imaging Processing Unit) by default even if its disabled in devicetree. We need to fill FSP upd based on the device enablement in devicetree. BUG=None BRANCH=None TEST=IPU is disabled and doesn't show in lspci. Change-Id: I0f9a40e85427fd88bb12a40770ecf7b939b1d8cd Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-08-18mb/prodrive/hermes: Enable LPSS ACPI driverPatrick Rudolph
Enable the introduced LPSS ACPI uart driver. Tested on Hermes using Linux 5.6: The UART2 appears as /dev/ttyS2. Change-Id: Ic15be4a807012216e52c848120de7e39522f57b7 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-18soc/intel/common: Add support for LPSS UART in ACPI modePatrick Rudolph
Emit ACPI code for LPSS UARTs operating in ACPI mode. In this mode the device vendor ID reads as 0xffff, the PCI devices is still operate. Add ACPI device IDs for APL, GLK, SPT, SPT_H and CNP_H. The mainboard's devicetree needs to be adapted to include the chip driver and the PCI ID when it wouldn't have been hidden. Example: chip soc/intel/common/block/uart device pci 19.2 hidden register "devid" = "PCI_DEVICE_ID_INTEL_CNP_H_UART2" end # UART #2 end Tested on Linux 5.6 with Sunrise Point ACPI ID for UART2. Tested on Windows for all other UARTs. Change-Id: I838d16322be38f5421c1f63b457a0af552e0ed96 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40405 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17soc/amd/common: add GPE event logsAaron Durbin
GPE events were not be recorded in the eventlog. Add those to the eventlog when the status register indicates those events. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Ifb3167fd24f2171b2baf1a65eb81a318eb3e7a86 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-17soc/amd/picasso: snapshot chipset state early in boot sequenceAaron Durbin
Previously the chipset state was snapshotted very late in the boot (ramstage). Instead start gathering the state early in romstage prior to calling any FSP routines so there's a clean snapshot. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Id41686e6cdf5bebc9633b514b4121b0447f9be2d Reviewed-on: https://review.coreboot.org/c/coreboot/+/44488 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-17soc/amd/stoneyridge: remove unused soc_power_reg objectAaron Durbin
Now that no one is consuming this object, remove its definition. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Ib5aeec1733b6c9fa49569e30c4c369f70af0939c Reviewed-on: https://review.coreboot.org/c/coreboot/+/44487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-17soc/amd/picasso: remove unused soc_power_reg objectAaron Durbin
Now that no one is consuming this object, remove its definition. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I60e4a9bfdf2752923f46a35aaab7034f9fa9b309 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-17soc/amd/common: removed unused functionsAaron Durbin
Now that all users of the functions manipulating global state and using soc-specific objects are removed remove those functions. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I18c4c8b0c7852dde8cf0b6b3f11e43e15c3ce155 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-17soc/amd/picasso: use new ACPI helper functions from commonAaron Durbin
Transition the current call sequence to using the newly added common ACPI helper functions. Semantically, the expectations are that this sequence is the equivalent of previous acpi_clear_pm1_status(). However, in subsequent patches picasso will be snapshotting state way sooner than ramstage. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I34e2ba7c5cd123b98c39291537e74175ec043e85 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-17soc/amd/stoneyridge: use new ACPI helper functions from commonAaron Durbin
Transition the current call sequence to using the newly added common ACPI helper functions. Semantically, the expectations are that this sequence is the equivalent of previous acpi_clear_pm1_status(). BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Id3ae19013c68d2c97b084046f600596ecc462374 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44483 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-17soc/amd/common: add acpi_fill_gnvs()Aaron Durbin
In order to reduce code duplication provide an acpi_fill_gnvs() helper function. Intent is to move stoneyridge and picasso over to using this common implementation instead of duplicating it. BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I21c6e2c24eaf42f31ae57c05df7f633d7dc266d9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44482 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-17soc/amd/common: add single function ACPI PM1 GPE helpersAaron Durbin
The existing code in common/block/acpi is mixing multiple operations: saving things to cbmem in common code but then soc code uses that information, reliant upon soc-specific struct soc_power_reg object, and only saving/snapshotting ACPI registers very deep in ramstage. To unwind the above provide some functions that are more targeted: - Add struct acpi_pm_gpe_state object - Add acpi_fill_pm_gpe_state() - Add acpi_pm_gpe_add_events_print_events() - Add acpi_clear_pm_gpe_status() BUG=b:159947207 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Ia7afed2861343802b3c78728784f7cfaf6f53f62 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-17crossgcc: Enable GCC to get asan shadow offset at runtimeHarshit Sharma
Unlike Linux kernel which has a static shadow region layout, we have multiple stages in coreboot and thus require a different shadow offset address. Unfortunately, GCC currently only supports adding a static shadow offset at compile time using -fasan-shadow-offset flag. For this reason, we enable GCC to determine asan shadow offset address at runtime using a callback function named __asan_shadow_offset(). This supersedes the need to specify this address at compile time. GCC then makes use of this shadow offset to protect stack buffers by inserting red zones around them. Some other benefits of having this GCC patch are: a. We can place the shadow region in a separate linker section with all its advantages like automatic fit insurance. This ensures if a platform doesn't have enough memory space to hold shadow region, the build will fail. (However, if we use a fixed shadow offset on a platform that actually doesn't have enough memory, it may still build without any errors.) b. We don't modify the memory layout compared to the current one, as we are placing the shadow region at the end of the space already occupied by the program. c. We can be much more flexible later if needed (thinking of other stages like bootblock). d. Since we are appending the shadow buffer to the region already occupied, we make efficient use of the limited memory available which is highly beneficial when using cache as ram. Further, we have made sure that if you compile you tree with ASan enabled but missed this patch, it will end up in the following compilation error: "invalid --param name 'asan-use-shadow-offset-callback'" So, you cannot accidentally enable the feature without having your compiler patched. Change-Id: I401631938532a406a6d41e77c6c9716b6b2bf48d Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-08-17vc/amd/agesa/f15tn: add 933 MHz to GfxMemClockFrequencyDefinitionTableMike Banon
This fix is required to avoid the division-by-zero error described at https://mail.coreboot.org/pipermail/coreboot/2014-March/077418.html while trying to run the DDR3 memory at 1866 MT/s (933 MHz). With this fix in place, ASUS A88XM-E boots fine with RAM at 1866 MT/s. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I8e7d00e362879b1247ecf2ab828936268bf9075f Reviewed-on: https://review.coreboot.org/c/coreboot/+/40485 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17nb/amd/agesa: read 256 bytes to SPD buffer instead of 128Mike Banon
Required for adding the XMP profiles support. SPD buffer is already 256 bytes at AMD AGESA vendorcode, so this is fine. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I7340b110477a4cc1ecb1c239181436e51952568f Reviewed-on: https://review.coreboot.org/c/coreboot/+/40484 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17soc/intel/skylake/acpi.c: Name devices on secondary busBenjamin Doron
Naming a device allows an ACPI _ROM method to be written for it. GPUs may require this to make the configuration data contained within available to an OS driver. This may be required for GPUs that do not contain their vBIOS, or perhaps the drivers require it in this form/fashion. Working on an Acer Aspire VN7-572G (Skylake-U). nouveau successfully obtains the vBIOS via ACPI (kernel 5.7.11). Change-Id: Ida87aebf8fdf341ab350c2bb3704d2ef695cf8f0 Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-08-17soc/intel/tigerlake: Allow fine grained control of S0iX statesJes Klinke
Expose devicetree parameter to enable/disable each individual substate. See https://review.coreboot.org/c/coreboot/+/43741 for context. TEST=util/abuild/abuild -t GOOGLE_VOLTEER -c max -x BUG=b:154333137 Change-Id: I8a0cf820e20961486813067c6945fe07bc4899f7 Signed-off-by: jbk@chromium.org Reviewed-on: https://review.coreboot.org/c/coreboot/+/44355 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17mb/google/volteer: Make devicetree default as Aux Orientation retimer controlledBrandon Breitenstein
With new board designs being introduced it does not make sense for the default devicetree setting to be retimer disabled on port 0 for Aux Orientation. Change the default to be Aux Orintation retimer controlled on all ports and move the SOC controlled overrides to the corresponding overridetree files. BUG=NONE BRANCH=NONE TEST=Built image for delbin and verified that port 0 flip is working. Change-Id: I5ff59493472db096c027d223f2fd61545dc935e2 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
2020-08-17mb/google/zork: Switch to normal read mode for EM100Furquan Shaikh
This change sets the EFS config for SPI read mode to normal read mode when using em100. With this, the boot is stable again without any random hangs in PSP. BUG=b:164429022 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I4cd3673dcc44a61905719a57f734df2fb9f4e6e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-17mb/intel/jasperlake_rvp: Configure GPIOs related to UFCPandya, Varshit B
This change configures user facing camera related GPIOs as per schematics. 1. GPP_D5 pwr_en 2. GPP_B14 reset 3. GPP_E0 clock 4. GPP_D12 I2C4b 5. GPP_D13 I2C4b Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Change-Id: I026c16f73cf597614efaea3e0f0ab1e2cfe1e211 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44416 Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17Makefile.inc: Remove redundant warning flagElyes HAOUAS
'-Wstrict-aliasing' is turned on by '-Wall'. '-Wstrict-aliasing' is only active when -fstrict-aliasing is active, so add it. 'BUILD_TIMELESS=1' on gigabyte/ga-945gcm-s2l gives the same binary. Change-Id: I51eb8241389f13d2659aef0a3b4b376ce9c651cf Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44216 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17crossgcc: Upgrade IASL to version 20200717Elyes HAOUAS
Summary of changes: https://acpica.org/node/183 Change-Id: Ib325fa5c37c32702c572ab56c99e1f8f785cbe53 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43554 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-17crossgcc: Upgrade Python to version 3.8.5Elyes HAOUAS
Change-Id: I660994ece28f04d97de2fe3a074ebcf93fb4d2f4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39148 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17crossgcc: Upgrade nasm to version 2.15.03Elyes HAOUAS
Change-Id: I4b38595cef72053f82216df43f3667abed4c1989 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42855 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17crossgcc: Upgrade binutils to version 2.35Elyes HAOUAS
Using "MAKEINFO = @MAKEINFO@", it fails to compile, so binutils-2.35_no-makeinfo.patch will change that to "MAKEINFO = true" Change-Id: I0ad01e5da34c96fee6a9b1a63897a9fb28471c75 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38666 Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17crossgcc: Update MPFR to version 4.1.0Elyes HAOUAS
Changes: https://www.mpfr.org/mpfr-current/#changes Change-Id: I1df2c952229056b44d4c618cebe774ea27b55bd1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43360 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17crossgcc: Upgrade GMP to v6.2.0Elyes HAOUAS
gmp_freebsd-configure.patch is integrated in upstream so we don't need it anymore. Changes: https://gmplib.org/gmp6.2 Change-Id: I8404872f1b65e9173c1fcbd24d7da7bdd7937503 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38465 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Idwer Vollering <vidwer@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17src: Use PCI_BASE_ADDRESS_* macros instead of magic numbersElyes HAOUAS
Change-Id: Id3390c5ac6a9517ffc2d202f41802e6f4d2e314c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44371 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17{soc/intel/common,sb/intel/lynxpoint}/hda_verb.c: Reduce differencesElyes HAOUAS
Change-Id: Ie63d7671eb19f0d4c4f67dfe242193e7949afdea Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-17{sb/intel/*/azalia.c,device/azalia_device.c}: Reduce differencesElyes HAOUAS
Remaining notable differences at function 'codec_detect(u8 *base)'. Change-Id: Ia64e0ba10f145cf2eae0cb2ff4951b1455963d5d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44370 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-17sb/intel/ibexpeak: Use <device/azalia_device.h> registersElyes HAOUAS
Change-Id: Ic257a11ec2a2f8b1809ed40ae0f9468574dfd009 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44131 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17sb/intel/i82801jx: Use <device/azalia_device.h> registersElyes HAOUAS
Change-Id: Ic661a1339892dad668ad3f9e68cab70bf380505f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44130 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17sb/intel/i82801ix: Use <device/azalia_device.h> registersElyes HAOUAS
Change-Id: Id6c2c7b474ad8f57294bae67c33b2dd26a6a95ad Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44129 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17sb/intel/i82801gx: Use <device/azalia_device.h> registersElyes HAOUAS
Change-Id: I1a5b0b9db0cc3847693934de20b5d27605617637 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44128 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17sb/intel/bd82x6x: Use <device/azalia_device.h> registersElyes HAOUAS
Change-Id: I1e30dd7b300d7975e7a89fbe1e66aaf7affd1702 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44127 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17sb/intel/lynxpoint: Use <device/azalia_device.h> registersElyes HAOUAS
Change-Id: Ib4929e3213676056ff3f8116d226fd38132baa28 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44126 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17device/azalia_device.c: Use <device/azalia_device.h> registersElyes HAOUAS
Change-Id: Ia0ba6c2f76221123acd3c5303b0a018c651f3617 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44125 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17soc/intel/common: Move common HDA registers to <device/azalia_device.h>Elyes HAOUAS
Change-Id: I9ea191e5076e2f055405dc34d46dbbb8cfb0015e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44106 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17mb/google/dedede/var/magolor: Generate SPD ID for supported partsRen Kuo
Add supported memory parts in the mem_list_variant.txt and generate the SPD ID for the parts. The memory parts being added are: MT53E512M32D2NP-046 WT:E K4U6E3S4AA-MGCR H9HCNNNBKMMLXR-NEE MT53E1G32D2NP-046 WT:A K4UBE3D4AA-MGCR And also remove the deprecated by cl#43989 https://review.coreboot.org/c/coreboot/+/43989 BUG=None TEST=Build the magolor board Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: I3348b7fbeff038b85e7d3c9137517e05a35bf3dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/44408 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17mb/tglrvp: Update SPD files for HynixAnil Kumar
- Increase DDR Frquency limit to support data rate 4266 Mbps Bug=None Test=Build and boot on tglrvp hardware; $dmidecode --type 17 reflects memory Speed = 4266 Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: I8185ebbaa32a01fee104bc0b757fc4adb58bba97 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44149 Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.corp-partner.google.com> Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17mb/up/squared: Increase MAX_CPUS from 2 to 4Reto Buerki
The board also supports Atom processors, which have four physical cores. Signed-off-by: Reto Buerki <reet@codelabs.ch> Change-Id: I98a3da660052eb7ad2f18b0c7fc0e67a609eac54 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44439 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-08-17mb/google/zork: adjust i2c2 data hold time for TPKevin Chiu
current setting got 0.278us which is less than the min 0.3us. increase i2c2 data hold time for TP. BUG=b:163613330 BRANCH=master TEST=1. emerge-zork coreboot chromeos-bootimage 2. data hold time measured by scope: 0.3805us Change-Id: I2d564983383c17ed43cc5cc5aaff0fcd67ce6928 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-17mb/google/volteer: Define stop_gpio for goodix touch screenCaveh Jalali
This applies to the goodix touch screen on both the volteer and volteer2 variants: Define GPP_E3 as the stop_gpio for the touch screen "Report_Switch" signal. Goodix defines a 1ms (minimum) delay after stop off. In addition, no longer drive this GPIO high by default as it is now controlled by the kernel through ACPI. BUG=b:153705232 TEST=touch screen still functional on volteer; confirmed timings with scope (VDD, RESET, REPORT_SWITCH) Change-Id: I3ead9cf79812d08c4917be4585ed273050465a9b Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-17payloads/seabios: Update stable version to 1.14.0Elyes HAOUAS
see https://seabios.org/Releases Change-Id: I20e57314b867581f41921178ff1ffcbaa50a0843 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2020-08-17mb/intel/jasperlake_rvp: Re-organize the FMAP layoutKarthikeyan Ramasubramanian
More space is required in the COREBOOT CBFS to accommodate some features. Currently no alternate firmware is stuffed into RW_LEGACY CBFS and has ~1 MB of unused space. Borrow some space from RW_LEGACY CBFS and extend the RO_SECTION. Even within RO_SECTION, GBB requires only 12 KiB. So adjust the GBB region accordingly and extend the COREBOOT CBFS. BUG=b:162159386 TEST=Build the JSLRVP mainboard. Change-Id: Ia8bb381c31ddf76f3211f9d4ac5c8c18c27834b7 Signed-off-by: Karthikeyan Ramasubramanain <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44283 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-08-17sb/intel/lynxpoint/smihandler.c: Remove dead assignmentElyes HAOUAS
Also remove unused 'data'. Change-Id: Icaae8a986cd375e2b67f05883688847e1a174082 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44288 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17drivers/intel/fsp2_0/hand_off_block: Remove dead decrementElyes HAOUAS
Value stored to 'size' is never read. Also drop unused parameter. Change-Id: If3e96ac90f06966ee408964e0748730bc237ec19 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-17mb/hp: select TPM and TPM1 for all EliteBook laptopsIru Cai
All the Sandy/Ivy Bridge EliteBook and ProBook laptops currently supported by coreboot and on review all support TPM 1.2 according the maintenance and service guide manuals of these laptops. So select the Kconfig options of TPM and TPM 1.2 and add the entry of it to the common device tree. The device tree C source files of 8460p generated by sconfig before and after this change are compared. All the device nodes still exist with nodes under LPC having different device number. Tested with 2560p, which still works without problems, and the TPM can be detected and used in the system. Change-Id: Ic6158d3346a55e3d09c0a4ced9fd141b9a6c4256 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-17mainboard: Add HP EliteBook 2560pIru Cai
Most of the code is generated by autoport. The laptop works well under coreboot with SeaBIOS 1.13.0 payload, running Arch Linux with kernel 5.4.39 and 5.6.11. Change-Id: I126916e201fb8e4b9067f2dececebfb5bae6df73 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41159 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-17cpu/Makefile.inc: Clean up non-existing directory inclusionArthur Heymans
The Allwinner code has been removed from the master branch for quite some time now. Change-Id: I9e5fd267140c180ae145d12b325cc489725f9ad0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44316 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17lib/imd_cbmem.c: Add a helper function to indicate that cbmem is readyArthur Heymans
This can be used in romstage in particular to know if dram is ready. Change-Id: I0231ab9c0b78a69faa762e0a97378bf0b50eebaf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38736 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>