summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-22soc/intel/tigerlake: Add definition for PMC EPOCDuncan Laurie
The PMC EPOC register indicates which external crystal oscillator is connected to the PCH. This frequency is important for determining the IP clock of internal PCH devices. Add definitions that allow this register to be read and extract the crystal frequency, and a helper function to extract and return this as the defined enum. BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I959fe507f3dbf93b6176b333a9e725ed09f56328 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40887 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21mb/google/volteer: set DRAM Max Cycle Time to 15Nick Vaccaro
The DRAM Max Cycle Time (tCKmax) for Samsung's K4UBE3D4AA-MGCL DRAM part should be set to 0xF. BUG=b:157178553, b:156555863 TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot a SKU4 volteer to the kernel and run "memtester 6G 100" and verify it completes successfully without error and does not crash. Change-Id: Id95b19fe261e3f57a52a43055acab99af66b14ab Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41634 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21mb/google/volteer: fix error in generic SPDNick Vaccaro
The SPD_LPDDR4X_200b_8bank_1Rx16_16Gb_DDP_4267.spd.hex SPD contained an incorrect SDRAM Max Cycle Time (0 instead of 0x0f). After fixing that error, I noticed that two generic SPDs could be collapsed into one, so I removed one of the duplicate generic SPDs (SPD_LPDDR4X_200b_8bank_1Rx16_16Gb_16Row_DDP_4267.spd.hex), and changed Makefile to collapse volteer's DRAM ID 2 into ID 0. BUG=b:156126658, b:156058720 TEST=Flash and boot a ripto to kernel. Also verified that ripto can boot successfully to the kernel at 4267 MT/sec with FSP built in debug mode with RMT enabled. Change-Id: Ib52bf674ebf91854d3d078015aa640aa7ee98a6f Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41345 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21soc/amd/common/block/gpio: add API for gpio override tablePeichao Wang
This function adds support for gpio_configure_pads_with_override which: 1. Takes as input two GPIO tables -- base config table and override config table 2. Configures each pad in base config by first checking if there is a config available for the pad in override config table. If yes, then uses the one from override config table. Else, uses the base config to configure the pad. BUG=b:153456574 TEST=Build and boot dalboz BRANCH=none Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I07bfe82827d1f7aea9fcc96574d6deab9e91d503 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2153423 Reviewed-by: Furquan Shaikh <furquan@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41576 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21util/amdfwtool: Fix MAX_PSP_ENTRIES valueRob Barnes
Had to increase MAX_PSP_ENTRIES to accommodate the 16 APCBs we have the ability to add. BUG=b:150862063 TEST=Boot Trembyle BRANCH=None Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I64eccfa28839768788f53327caf187a564842162 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2090323 Reviewed-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41580 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21soc/amd/picasso/chip.c: Generate ACPI nodes for PCI Bridge A and BRaul E Rangel
This node is required so we can add child ACPI nodes. BUG=b:147042464 TEST=Boot trembyle and confirm Bus A has a firmware node $ cat /sys/bus/pci/devices/0000\:00\:08.1/firmware_node/path \_SB_.PCI0.PBRA Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I18144a69ed28a913bc9a2523d69edf84a1402e7e Reviewed-on: https://review.coreboot.org/c/coreboot/+/41546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-21soc/amd/picasso/pci_devs: Update pci_devs.h with correct valuesFurquan Shaikh
This is a squash of the following commits. The original values were wrong, and had confusing naming. soc/amd/picasso: Get rid of *_DEVID from pci_devs.h Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Change-Id: I203449499840bf0a6df8bd879fb7d2e75a16b284 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2153714 src/amd/picasso: Update PCI bridge devices Orignal-Change-Id: I1fa9d52ce113eacdc5c9ba31ab46b6428a7d6ca9 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Zork: Reorganizing ACPI and adding PCI bridge configs Signed-off-by: Pranay Shoroff <pshoroff@google.com> Original-Change-Id: I1e2095567525f302dfd0bce8e39001250523180b Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2063536 soc/amd/picasso: Fix soc_acpi_name() to use devfn instead of devid Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Change-Id: I2486e7e0059e0528f53d5a158c9328636563fe93 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2153712 BUG=b:147042464 TEST=Build trembyle and boot to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I91bf7f9edcddf03027f8fdcaadf4e290ece10df5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-05-21ec/google/chromeec/acpi: Add CROS EC CODEC deviceYu-Hsuan Hsu
This is currently used by trembyle. Add it in a common location so other boards can use it. BUG=b:147200751 BRANCH=none TEST=Able to get ec codec on trembyle Change-Id: Ie21cd813b0e3129f1c61d2de199532b25d3c70fa Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2000271 Reviewed-by: Raul E Rangel <rrangel@chromium.org> Reviewed-by: Martin Roth <martinroth@chromium.org> Commit-Queue: Martin Roth <martinroth@chromium.org> Tested-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41575 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21ec/google/chromeec/i2c_tunnel: Fix missing constRaul E Rangel
This was missed in the refactor. BUG=b:157140753 TEST=Built trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I150e0b8a806042ef8001805eaefbce71dc1be0e6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41574 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21nb/intel/sandybridge: Use the new IOSAV struct APIAngel Pons
Now that we have created the IOSAV API, we can put it to good use. Drop all the helper macros and replace them with struct constructs. Tested with BUILD_TIMELESS=1, ASUS P8Z77-V LX2 remains unchanged. Change-Id: Ib366e364df11c9bb240cdfbce418540ec715c634 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41003 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21nb/intel/sandybridge: Drop unused parametersAngel Pons
We now use a static variable to handle the sequence length. Tested on Asus P8Z77-V LX2, still boots. Change-Id: Id3115c14336ea128264bd3945a99c52b9796d115 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-05-21nb/intel/sandybridge: Redefine IOSAV_SUBSEQUENCEAngel Pons
Instead of directly writing values to the IOSAV registers, use a struct and some helper functions to provide a cleaner interface for the IOSAV. Having IOSAV_SUBSEQUENCE refer to a static function is weird, but we will remove this macro in a follow-up that does not change the binary. Tested on Asus P8Z77-V LX2, still boots. Change-Id: I73f13c18a739c5586a7415966f9017c2335fdfd1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40980 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-05-21nb/intel/sandybridge: Truncate IOSAV subseq gapsAngel Pons
We set bit 15 of IOSAV_n_SUBSEQ_CTRL three times, but it is reserved. Since this bitfield is five bits wide, manually truncate the values so that bit 15 does not get set. Tested on Asus P8Z77-V LX2, still boots. Change-Id: Ib61b026b016b0d22e164f8817158ec5093f6bb9e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-05-21nb/intel/sandybridge: Replace macros with functionsAngel Pons
Turn `iosav_run_queue` and `iosav_run_once` into functions. Inlining them does not have any effect, as the resulting binary is identical. Tested on Asus P8Z77-V LX2, still boots. Change-Id: I7844814eeedad9b1d24f833a77c90902fa926bfe Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40983 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-05-21nb/intel/sandybridge: Refactor IOSAV_RUN_ONCEAngel Pons
Turn it into a macro that looks like a function, and add another, more generic `iosav_run_queue` that covers all current use-cases. They will be replaced with functions in a follow-up to preserve reproducibility. Tested with BUILD_TIMELESS=1, ASUS P8Z77-V LX2 remains unchanged. Change-Id: I07b260b5fb111c1408ff75316dc0735a9e642ac9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-05-21nb/intel/sandybridge: Refactor IOSAV_SUBSEQUENCE againAngel Pons
To replace the register writes with assignments to struct fields, we would need to have the values as parameters of a single macro. So, split the raw value of `IOSAV_n_SP_CMD_CTRL_ch` in two parts. Note that the single command that sets bit 17 is likely wrong, but it will be fixed after refactoring. For now, we'll treat it as part of `ranksel`. Move the parameters of `ADDR_UPDATE` into the top-level IOSAV macro. Hopefully, this will be enough to replace the underlying implementation. Line length limits are not for review. Breaking the lines unnecessarily complicates search and replace operations, and wil be taken care of in subsequent commits. Tested with BUILD_TIMELESS=1, ASUS P8Z77-V LX2 remains unchanged. Change-Id: I404edbd5d90ddc2a6993f39f552480d1ef24e153 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40978 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-05-21vc/amd/fsp/picasso: Rename the fsp_ddi and fsp_pcie descriptorsRaul E Rangel
This change was missed when I ported over fsp_params.c. BUG=b:157140753 TEST=Boot trembyle to OS Fixes: 89e51e61781 ("soc/amd/picasso: Allow mainboard to provide pci ddi descriptors") Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Icdb6aebe5a3be7174170bdf37a1f379f02dcc5a5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41579 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-05-21soc/amd/picasso: Add APOB NV back for non-S3Marshall Dawson
New information indicates the PSP expects the APOB NV region populated for all types of boot, and this is not a feature only used for S3. Switch over to using the MRC_CACHE flash region. Remove the Kconfig symbols for the APOB_NV base and size. Override the MRC_CACHE_SETTINGS_CACHE_SIZE to ensure the default maintains the minimum required size. Use the generated (or mainboard-specified) fmap.fmd file as an input for amdfwtool and properly match the flash region. Change the original naming for the APOB destination, which matched the PSP spec's field name, to PSP_APOB_DESTINATION. This should be more intuitive for a source code reader. The APOB address is the location in DRAM where the PSP puts its output block. BUG=b:147042464, b:153675914 TEST=Boot trembyle Original-Change-Id: Ia5ba8646deec2bd282df930f471738723063eef8 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2080375 Original-Change-Id: I972d66f1817f86ff0b689f011c0c44c3fe7c8ef7 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2053312 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I4550766ece462b65a6bfe6f1b747343e08e53fe5 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38703 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-21soc/amd/picasso/soc_util: change return type of soc_is_*Felix Held
All callers just check for zero/non-zero. Change-Id: I795763ce882d879d12c97b71e7a0b35423378c36 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-05-21soc/amd/picasso/include/soc_util: add include guardsFelix Held
Change-Id: I2de16eaa88baace28afa30345b7762353a48ab87 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41558 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21soc/amd/picasso/southbridge: add missing soc/i2c.h includeFelix Held
soc/i2c.h gets included indirectly via chip.h and removing the chip.h in 73716d0e924080ea32274a265a8de04e009c3676 broke the build. chip.h got added back, but including soc/i2c.h directly fixes the underlying issue. Change-Id: Ic84f7b6b4447b7c335a51dc604daf8924851e555 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-21soc/intel/tigerlake: Make audio devices scan the busDuncan Laurie
The audio devices are currently set to enable static devices at their own level, but in order to supported nested SoundWire devices these drivers must instead use scan_static_bus. Without this change the device tree code will not look at children of these devices. After this change the audio device can have nested devices: device pci 1f.3 on chip drivers/intel/soundwire device generic 0 on end end end BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: Ibb716fbd9ffdc45f2c4bbe5e81f420ec2b13483c Reviewed-on: https://review.coreboot.org/c/coreboot/+/40886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-21acpi/device: Add a helper function to write SoundWire _ADRDuncan Laurie
This change adds a help function to write a SoundWire ACPI address object that conforms to the SoundWire DisCo Specification Version 1.0 The SoundWire address structure is defined in include/device/soundwire.h and provides the properties that are used to form the _ADR object. BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I6efbf52ce20b53f96d69efe2bf004b98dbe06552 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40885 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21acpi/soundwire: Add functions to generate SoundWire propertiesDuncan Laurie
This change uses the previously added SoundWire definitions to provide functions that generate ACPI Device Properties for SoundWire controllers and codecs. A SoundWire controller driver should populate `struct soundwire_controller` and pass it to soundwire_gen_controller(). This will add all of the defined master links provided by the controller. A SoundWire codec driver should populate the necessary members in struct soundwire_codec and pass it to soundwire_gen_codec(). Several properties are optional and depend on whether the codec itself supports certain features and behaviors. The goal of this interface is to handle all of the properties defined in the SoundWire Discovery and Configuration Specification Version 1.0 so that controller and codec drivers do not need to all have code for writing standard properties. Both of these functions also provide a callback method for adding custom properties that are not defined by the SoundWire DisCo Specification. These properties may be required by OS drivers but are outside of the scope of the SoundWire specification itself. This code is tested with controller, codec, and mainboard implementations in subsequent commits. BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: Ib185eaacf3c4914087497ed65479a772c155502b Reviewed-on: https://review.coreboot.org/c/coreboot/+/40884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-21mb/lenovo/x230: Turn X230 into a variantBill XIE
Other variants would be added later. Change-Id: Ic6af14f0aa7a6f7378048f3c38d5713c18950366 Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41509 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21Revert "mainboard/lenovo/x230: Add ThinkPad x230s as a variant"Bill XIE
This reverts commit 6b95507ec5b087658178a325bdc68570bc48bb20, in order to recommit and review it again. Change-Id: Id4ddf99200f77016a48d02a8421d080cea492aae Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41504 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20google/trogdor: Fix ram_code and sku_id strappingsJulius Werner
I'm not quite sure what happened when we first added the code for Trogdor strappings but something clearly seems to be wrong. First of all, on newer schematics the RAM_ID_1 pin is actually pin 19, not pin 91. It only used to be 91 on rev0. Whether that was an intentional change or someone just swapped the digits on accident at some point, we're not quite sure anymore, but it seems to be 19 going forward so that is what we should be programming. (ram_code wasn't used for anything on Trogdor rev0 so we don't care about adding backwards-compatibility for that.) The sku_id pins are also somewhat out of whack: first of all, a new SKU_ID_2 pin was added for rev1 that wasn't there on rev0. Second, SKU_ID_0 is not GPIO_114. In fact, it has never been GPIO_114. I have no idea how that number got there. Anyway, fix it. (Like with the ram_code, SKU IDs were also not used for rev0 so we won't make this backwards-compatible.) Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ia14ec74ec2f16ce2661f89d0d597a5477297ab69 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philip Chen <philipchen@google.com>
2020-05-20mb/purism/librem_skl: select GFX_GMA_IGNORE_PRESENCE_STRAPSMatt DeVillier
Some Librem 13v4's don't have the presence straps connected, leading libgfxinit to fail to init the internal display. Select GFX_GMA_IGNORE_PRESENCE_STRAPS since all SKL/KBL Librems have an internal display so there's no adverse effect. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: Ib9d281b7d495c4f9a5c6fc5fdb8042b0fcbda745 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41417 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20drivers/intel/gma: Add override for presence strapsMatt DeVillier
A handful of boards do not properly implement the presence straps, leading libgfxinit to fail to detect an attached display. Add an override, defaulting to N, which can be set for affected boards. Add a section to the documentation detailing the option and its usage. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I43c61d67147878887658b23d90fb1c0b91e7a2af Reviewed-on: https://review.coreboot.org/c/coreboot/+/41416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-05-203rdparty/libgfxinit: Update submodule pointerMatt DeVillier
Update libgfxinit submodule pointer to pull in handling for presence straps bypass and some minor cleanup. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: Id4a903383f32f352aa3595bd72bc5f6f0777171c Reviewed-on: https://review.coreboot.org/c/coreboot/+/41515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-20drivers/intel/gma: License libgfxinit glue code under GPL v2Nico Huber
Change-Id: I7a78e16512369cbaada4399dbb855ade358ff046 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41521 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
2020-05-20mb/google/endeavour: chrontel: fix interrupt and compat stringJeff Chase
The devicetree declares the chrontel interrupt as GpioInt so the GPIO needs to be configured as such instead of routing directly to APIC. Also update the compatible string to conform to kernel standards. BUG=b:146576073 TEST=install ch7322 driver; send commands using cec-ctl and verify that the interrupt handler is called. Change-Id: I737d951db135c53deb0f3cb956f0d0f275082251 Signed-off-by: Jeff Chase <jnchase@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-20tigerlake: enable DPTF functionality for volteerSumeet R Pawnikar
Enable DPTF functionality for volteer platform BRANCH=None BUG=b:149722146 TEST=Built and tested on volteer system Change-Id: I385fb409ccd291d97369295ff99f21c9430880f9 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41427 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20soc/intel/tigerlake: Add TCSS devices to soc_acpi_name()Duncan Laurie
Add ACPI device names for TCSS devices which were not already defined which match those declared in the DSDT at acpi/tcss.asl. Change-Id: I6a79da7dd78c73345986c12d6ffe467cd4322e05 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-20soc/mediatek/mt8183: Set CA and DQ vref range to correct valueHuayang Duan
The CA vref should alway select range[1]. But in fast calibration flow, we missed the range selection and caused the CA vref to use the range[0] value. The DQ vref should select correct range that corresponds to current frequency, that is for 1600Mbps, 2400Mbps to select range[1], for 3200Mbps and 3600Mbps to select range[0]. Refer to the 'JESD209-4 - Low Power Double Data Rate 4X(LPDDR4X).pdf', used MR12 to set Vref(CA) levels, used MR14 to set VREF(DQ) levels. MR12 range[0] values from 15.0% to 44.9%, range[1] values from 32.9% to 62.9%, MR14 range[0] and range[1] values same as MR12. BUG=b:153614919 BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: Ie7680b1bf0c29c946d18e3b27626ce6f31c4216b Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40525 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20drivers/emulation/qemu/bochs: Rewrite driverPatrick Rudolph
Support MMIO mapped BOCHS interface supported since qemu 3.0. This allows to use multiple virtual GPUs by specifying: qemu -device bochs-display -device bochs-display ... Tested on qemu. std, qxl, vmware and multiple bochs displays are working fine. Change-Id: Ib0eba4815942625ce4859946efccca500301bb65 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Himanshu Sahdev <sahdev.himan@gmail.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2020-05-20soc/intel/tigerlake: Move pmc_soc_set_afterg3_en to pmutilTim Wawrzynczak
pmc.c was included in the SMM object, but only needed the one function, pmc_soc_set_afterg3_en. pmutil.c was already doing power management- related functionality, and was included in SMM, so moving pmc_soc_set_afterg3_en to pmutil.c allows pmc.c to be removed from the SMM build. Change-Id: I87f65fd10d35f1f75516e804501d5319b81a0383 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41407 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20soc/intel/tigerlake: Move PMC PCI resources under PMC deviceTim Wawrzynczak
Historically in coreboot, the PMC's fixed PCI resources were described by the System Agent (the MMIO resource), and eSPI/LPC (the I/O resource). This patch moves both of those to a new Intel SoC-specific function, soc_pmc_read_resources(). On TGL, this new function takes care of providing the MMIO and I/O resources for the PMC. BUG=b:156388055 TEST=verified on volteer that the resource allocator is aware of and does not touch these two resources: ("PCI: 00:1f.2 resource base fe000000 size 10000 align 0 gran 0 limit 0 flags f0000200 index 0 PCI: 00:1f.2 resource base 1800 size 100 align 0 gran 0 limit 18ff flags c0000100 index 1") Also verify that the MEM resource is described in the coreboot table: ("BIOS-e820: [mem 0x00000000fe000000-0x00000000fe00ffff] reserved") Verified the memory range is also untouchable from Linux: ("system 00:00: [mem 0xfe000000-0xffffffff] could not be reserved") Change-Id: Ia7c6ae849aefaf549fb682416a87320907fb3fe3 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41385 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20device/pci_device: Add notion of "hidden" PCI devicesTim Wawrzynczak
On some SoCs, there are PCI devices that may get hidden from PCI enumeration by platform firmware. Because the Vendor ID reads back as 0xffffffff, it appears that there is no PCI device located at that BDF. However, because the device does exist, designers may wish to hang its PCI resources off of a real __pci_driver, as well as have it participate in ACPI table generation. This patch extends the semantics of the 'hidden' keyword in devicetree.cb. If a device now uses 'hidden' instead of 'on', then it will be assumed during PCI enumeration that the device indeed does exist, and it will not be removed as a "leftover device." This allows child devices to be enumerated correctly and also PCI resources can be designated from the {read,set}_resources callbacks. It should be noted that as of this commit, there are precisely 0 devices using 'hidden' in their devicetree.cb files, so this should be a safe thing to do. Later patches will begin moving PCI resources from random places (typically hung off of fixed SA and LPC) into the PMC device (procedure will vary per- platform). Change-Id: I16c2d3e1d1433343e63dfc16856cff69cd815e2a Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-20mb/google/volteer: Fix camera dsdt config for ov2740Daniel Kang
Link frequency and a format was not correct for volteer proto 2 ov2740 user-facing camera. The link frequency is calculated in the following way. (max frame width * max frame height * max fps * data format in bps / number of lanes / data rate) + max 35% of overhead For ov2740, (1920 * 1080 * 60 * 10 / 2 / 2) = 311Mhz. 360Mhz after adding 18% of overhead. BUG=b:148428976 BRANCH=none TEST=Build and boot volteer proto 2 board. Start a camera app and check user-facing camera functionalities. Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Change-Id: I3b51826e123dec394c1b4eb9a1c5b64b8b11459e Reviewed-on: https://review.coreboot.org/c/coreboot/+/41157 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Dossym Nurmukhanov <dossym@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20tigerlake: update processor power limits configurationSumeet R Pawnikar
Update processor power limit configuration parameters based on common code base support for Intel Tigerlake SoC based platforms. BRANCH=None BUG=None TEST=Built and tested on volteer system Change-Id: Iccd387d78bb45ca3de73f531a901d1d3f793d7bd Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39345 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20icelake: remove unused processor power limits configurationSumeet R Pawnikar
Remove unused processor power limit configuration parameter and function call based on common code base support for Intel Icelake SoC based platform. BRANCH=None BUG=None TEST=Built for icelake based dragonegg board. Change-Id: Id8923f2c176092b6f7acfbfb079587f88258dce8 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41236 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20mainboard/volteer: Update Aux settings for Port 0Brandon Breitenstein
On Volteer port 0 (MB PORT) does not have a retimer so the port needs to be configured for the SOC to handle Aux orientation flipping. This requires 2 changes setting the TcssAuxOri UPD to 1 for port 0 (Bit 0) and configuring AUXP and AUXN GPIOs to Native Function 6 so SOC can control the orientation BUG=b:145220205 BRANCH=NONE TEST=booted Volteer proto 2 and verified that the AUX channels flip when the cable is flipped Change-Id: Ic81adc24d10322cc305bf0fa4c38514468ea0942 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-05-20soc/tigerlake: Add devicetree configurability for IomTypeCPortPadCfgBrandon Breitenstein
In order for the SOC to be able to control the Aux line orientation for Type-C ports that do not have a retimer, the IomTypeCPortPadCfg UPD needs to be configurable through devicetree to correctly set the GPIO pins that the SOC should use to flip orientation. BUG=b:145220205 BRANCH=NONE TEST=booted Volteer proto 2 and verified that the AUX channels flip when the cable is flipped Change-Id: I2e48adb624c7922170eafb8dfcaed680f008936e Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40244 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20mb/google/volteer: Enable EARLY_EC_SYNCCaveh Jalali
This enables EC software sync in romstage. BUG=b:148259137 TEST=verified EC is updated in romstage using coreboot serial console logs. Change-Id: Ibb97c1d57220f7fd74131a5aee450b1ab4b1c982 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41078 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20mb/google/deltaur: Remove WLAN PCIE settingEric Lai
Deltaur uses CNVi WLAN module, this setting is not required. BUG=none TEST=WiFi is functional in OS. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Idb23e271074c8d1e111c559695d4169af5e0d3cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/41495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-20mb/google/deltaur: Add tcss.aslEric Lai
Add tcss.asl to support TCSS power management. For the detail please refer cb:39785. BUG=none TEST=Check TBT PCIe root ports: 00:07.0/00:07.1/00:07.2/00:07.3 /sys/bus/pci/devices/bus:device:func/power suspend and active time can increase. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I432f3d6643de13b08c07e47f799c0ecdfe047de6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41506 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20soc/intel/jasperlake: Add ACPI method to get GPIO PCR PIDAamir Bohra
Add method acpi method GPID to return the GPIO PCR port ID. This method is further planned to be used for GPIO power management configuration. TEST=Build waddledoo board Change-Id: Ic45b40bbe39e303cddcc82e0e848786b7311ab64 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41501 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-20soc/intel/common/acpi: Remove gpio community rangeAamir Bohra
Remove hardcoded gpio community range, since it might differ across the SOCs. Change-Id: I79c10669f6096537d466d1abd356d58a50fcb8f5 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41500 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-20driver/i2c/max98390: Fix build error related to max98390 driverSeunghwan Kim
Fix coreboot build error with adding this driver BUG=b:149443429 BRANCH=None TEST=built without errors Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Change-Id: I2d76ec72ca6ae9ac54ab05f15ea92beb645acd5c Reviewed-on: https://review.coreboot.org/c/coreboot/+/41496 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-20mb/google/deltaur: Add low power idle tableEric Lai
Add low power idle table to notify EC system is entering s0ix. BUG=none TEST=Power button and keyboard backlight are off when suspending. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Icf4dffe2bd289c15854bbad914c3b34b307254ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/41494 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20superio/winbond/w83977tf: Scope UART configuration defines more locallyPatrick Georgi
By undefining the configuration after use we're sure that nobody else comes to depend on it without us noticing. Change-Id: I7c5cfd58be643d6431989fc69cf3b397920590b9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41530 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-20Documentation: Encourage documentation with code changesPatrick Georgi
The resource allocator woes post-4.12 release showed room for improvement on both discussion and documentation. To encourage this (and encourage reviewers to look out for issues in that space), extend the review guidelines so that they encourage to more clearly document the reason for a change with the change (commit message or our documentation) and also to loop in the mailing list. Change-Id: I1962dba3fe7e1a01fa4c8b0058297c7d050cb7b7 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41493 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-20mb/google/hatch: Fix Puff variants rom size from 32768 -> 16384 KBEdward O'Callaghan
Originally variants make use of a 32MB chip whereas now they use a 16MB SPI flash. Allow for the coordination of dealing with the transition between phases. V.2: Leave Puff alone at the moment due to the complexity of coordination. BUG=b:153682192 BRANCH=none TEST=none Change-Id: Ic336168ea1a0055c30f718f5540209d2cf69d029 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40897 Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20soc/intel/broadwell: Mask lower 20 bits of TOLUD and TOLM in systemagent.aslFurquan Shaikh
Lower 20bits of TOLUD and TOLM registers include 19 reserved bits and 1 lock bit. If lock bit is set, then systemagent.asl would end up reporting the base address of low MMIO incorrectly i.e. off by 1. This change masks the lower 20 bits of TOLUD and TOM registers when exposing it in the ACPI tables to ensure that the base address of low MMIO region is reported correctly. Change-Id: I11b3ef8deda21930998471ab6e712da4c62f5b02 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41471 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-20soc/intel/broadwell: Update systemagent.asl to ASL2.0 syntaxFurquan Shaikh
This change updates systemagent.asl to use ASL2.0 syntax. This increases the readability of the ASL code. TEST=Verified using --timeless option to abuild that the resulting coreboot.rom is same as without the ASL2.0 syntax changes for auron. Change-Id: I479bb6cb7ed4c9265325c7c8621f03454f21f467 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-20soc/intel/skylake: Mask lower 20 bits of TOLUD and TOLM in systemagent.aslFurquan Shaikh
Lower 20bits of TOLUD and TOLM registers include 19 reserved bits and 1 lock bit. If lock bit is set, then systemagent.asl would end up reporting the base address of low MMIO incorrectly i.e. off by 1. This change masks the lower 20 bits of TOLUD and TOM registers when exposing it in the ACPI tables to ensure that the base address of low MMIO region is reported correctly. Change-Id: I2ff7a30fabb7f77d13acadec1e6e4cb3a45b6139 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-20soc/intel/skylake: Update systemagent.asl to ASL2.0Furquan Shaikh
This change updates systemagent.asl to use ASL2.0 syntax. This increases the readability of the ASL code. TEST=Verified using --timeless option to abuild that the resulting coreboot.rom is same as without the ASL2.0 syntax changes for soraka. Change-Id: If8d8dd50af9a79d30f54e98f7f2fe7ce49188763 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41480 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-20soc/intel/common/block/acpi: Fix error in shift operation for GPCLFurquan Shaikh
CB:41454 updated northbridge.asl to ASL2.0 syntax. During this, GPCL was incorrectly updated to use << (ShiftLeft) instead of >> (ShiftRight). This change fixes the error in GPCL by updating it to use >> (ShiftRight). TEST=Verified using --timeless option to abuild that the resulting coreboot.rom is same as without the ASL2.0 syntax changes for hatch. Change-Id: I36469cb3b0bcc595acf0e43808d6a574986cad68 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41519 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20soc/amd/picasso: Add pcie root complex driverMarshall Dawson
* Declare memory and reserved areas using HOBs for regions above top of low memory. * Copy northbridge_fill_ssdt_generator from stoneyridge. BUG=b:147042464 TEST=Boot trembyle and see PCI resources in the log: PCI: 00:00.0 PCI: 00:00.0 resource base 0 size a0000 align 0 gran 0 limit 0 flags e0004200 index 0 PCI: 00:00.0 resource base a0000 size 20000 align 0 gran 0 limit 0 flags f0000200 index 1 PCI: 00:00.0 resource base c0000 size 40000 align 0 gran 0 limit 0 flags f0004200 index 2 PCI: 00:00.0 resource base 100000 size cd700000 align 0 gran 0 limit 0 flags e0004200 index 3 PCI: 00:00.0 resource base f8000000 size 4000000 align 0 gran 0 limit 0 flags f0000200 index c0010058 PCI: 00:00.0 resource base ce000000 size 2000000 align 0 gran 0 limit 0 flags f0004200 index 4 PCI: 00:00.0 resource base 100000000 size 12f340000 align 0 gran 0 limit 0 flags e0004200 index 5 PCI: 00:00.0 resource base 22f340000 size cc0000 align 0 gran 0 limit 0 flags f0004200 index 6 PCI: 00:00.0 resource base cd800000 size 800000 align 0 gran 0 limit 0 flags f0004200 index 7 PCI: 00:00.0 resource base cd7fe000 size 2000 align 0 gran 0 limit 0 flags f0004200 index 8 PCI: 00:00.0 resource base cc7fe000 size 1000000 align 0 gran 0 limit 0 flags f0004200 index 9 PCI: 00:00.0 resource base 1090000 size b0000 align 0 gran 0 limit 0 flags f0004200 index a Change-Id: I44a4a97765151fbcfe4c5d8de200e3e015aaaf2e Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34424 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20soc/amd/picasso: Add Kconfig option for the PSP bootloader filenameMartin Roth
Add option to change bootloader file. BUG=b:149934526 TEST=Change option and verify new bootloader file is used. Using the amd_blobs I can only boot using PspBootLoader_test_RV_dbg.sbin. Change-Id: Ib6597f7d4ffa0d48aead6974bd7111c987418f20 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2067598 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-20soc/amd/picasso/acpi: Improve PCI Interrupt Link DevicesRaul E Rangel
The PCI interrupt devices were only partially implemented. * Lacked support for _DIS to disable the bus. Something the kernel does while booting. * Lacked support for APIC vs PIC. This means the devices can only be used when using the PIC. By looking at the PMOD variable we can handle both PIC and APIC. This means we can stop hard coding the PCI interrupt numbers in the ACPI tables. * I removed INT[E-H] since they are not used. BUG=b:139429446, b:147042464 BRANCH=none TEST=Boot with both the APIC and PIC and saw that the link devices work as expected: PIC MODE: [ 1.959345] ACPI: PCI Interrupt Link [IRQA] (IRQs 1 3 4 5 *6 7 8 9 10 11 12 14 15) [ 2.007344] ACPI: PCI Interrupt Link [IRQB] (IRQs 1 3 4 5 *6 7 8 9 10 11 12 14 15) [ 2.056344] ACPI: PCI Interrupt Link [IRQC] (IRQs 1 3 4 5 6 7 8 9 10 11 12 *14 15) [ 2.104344] ACPI: PCI Interrupt Link [IRQD] (IRQs 1 3 4 5 6 7 8 9 10 11 12 14 *15) [ 13.752676] PCI Interrupt Link [IRQA] enabled at IRQ 6 [ 13.816755] PCI Interrupt Link [IRQD] enabled at IRQ 15 [ 27.788798] PCI Interrupt Link [IRQB] enabled at IRQ 6 [ 27.852873] PCI Interrupt Link [IRQC] enabled at IRQ 14 APIC MODE: [ 19.311764] ACPI: PCI Interrupt Link [IRQA] (IRQs *16 17 18 19 20 21 22 23) [ 19.374765] ACPI: PCI Interrupt Link [IRQB] (IRQs 16 *17 18 19 20 21 22 23) [ 19.438770] ACPI: PCI Interrupt Link [IRQC] (IRQs 16 17 *18 19 20 21 22 23) [ 19.501764] ACPI: PCI Interrupt Link [IRQD] (IRQs 16 17 18 *19 20 21 22 23) [ 34.719072] PCI Interrupt Link [IRQA] enabled at IRQ 23 [ 34.798994] PCI Interrupt Link [IRQD] enabled at IRQ 22 [ 66.469510] PCI Interrupt Link [IRQB] enabled at IRQ 21 [ 66.542395] PCI Interrupt Link [IRQC] enabled at IRQ 20 Change-Id: I1bb84813b65c89b4b5479602be3e9a9fedb7333d Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2095683 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-05-20soc/amd/picasso/acpi: Move _PIC method to root namespaceRaul E Rangel
The _PIC method sets the interrupt model (PIC or APIC). It needs to be defined at the root level for the kernel to find it. Previously this method was never getting called, so we were always stuck in APIC mode. BUG=b:139429446, b:147042464 BRANCH=none TEST=Saw the method getting called [ 1.251774] ACPI Debug: "PIC MODE: 0000000000000001" Change-Id: Idd5e9646df8d56e7cbec2be8b4016c36d81e5fb8 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2095682 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41437 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-05-20soc/amd/picasso/soc_util: use socket type detectionFelix Held
Remove the Kconfig options for per board socket type selection and use the runtime detection instead. Change-Id: I82cf922661c24e2a529fa4927893727b643660e3 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41518 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20soc/amd/picasso/soc_util: add socket type detection and printingFelix Held
Change-Id: I643a4c5f8a42a5fb0603a1a049545b57d16493a6 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41517 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-19device: Add definitions for SoundWire specificationDuncan Laurie
This header implements structures to describe the properties defined in the SoundWire Discovery and Configuration Specification Version 1.0. By itself this just provides the property definitions, it is then used by the code that generates ACPI device properties and by the controller and codec drivers. A new header for MIPI vendor/device IDs is also added, with the MIPI Alliance board members added by default. This will be used in the same way as pci_ids.h to track devices added to coreboot. BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: Ie9901d26d1efe68edad7c049c98a976c4e4f06f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40883 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-19soc/amd/picasso/romstage: removed unused includeFelix Held
Change-Id: I550599ae5ef9875ce820a4534d21439ff2027585 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41513 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-05-19superio/winbond/w83977tf: Fix iasl warningKeith Hui
The common PnP serial port DSDT code is intentionally included twice for two serial ports with different LDNs. Undefine LDN and the PM register name before redefining for second serial port so iasl doesn't complain. Change-Id: I031905479c66698fb01da028e3f37d923396d2d9 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41095 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-19nb/intel/sandybridge: Do not hardcode resource indicesAngel Pons
Other northbridges use an index variable to assign monotonically incrementing values to each resource. Do it here as well. Change-Id: I8719a1a5973a10531cf11b3307652212cb3d4895 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-19security/tpm/tspi: Fix handling of white space delimited listharshit
The current implementation uses strcmp() without splitting the list and therefore returns false even when the string pointed to by 'name' is a part of 'whitelist'. The patch fixes this problem. Also, update help text of CONFIG_TPM_MEASURED_BOOT_RUNTIME_DATA to space delimited list to align it with the other lists we use. Change-Id: Ifd285162ea6e562a5bb18325a1b767ac2e4276f3 Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41280 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-05-19nb/intel/sandybridge: Correct IOSAV register notesAngel Pons
The IOSAV register descriptions are plagued with errors and nonsense. Using `git blame` to find the culprit... Zoinks! Turns out it was me! Rewrite the comment so that the difference between a sub-sequence and a command is clear. Also, expand the descriptions that could be ambiguous and fix some insane blunders. CKE and ODT fields are per DIMM and rank! As per review comments, also invert the order of bitfield value ranges. Change-Id: Ie384304c565f962fe58baa231c15109eb3d284aa Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-19tests: Add region-test for rdev APIJulius Werner
This patch adds a basic test for the common region and region_device APIs, sanity checking the basic functions and things like overflow-handling. There is certainly more that could be added here, but it's a start. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I4932402f54768557e5b22b16e66220bd90ddebfd Reviewed-on: https://review.coreboot.org/c/coreboot/+/41046 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Jan Dabros Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-19tests: Add <tests/test.h> wrapper header and fix --gc-sectionsJulius Werner
<cmocka.h> requires a few standard headers to be explicitly included before itself or it will throw compilation errors. Having to always include these headers in the right order in every test is cumbersome. Instead, this patch encapsulates the problem in a new <tests/test.h> header that all tests should include (instead of <cmocka.h> directly). Also fix --gc-sections in the test framework which needs to be passed for linking, not for compiling. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I4284d74c8673708e21a5266eb42f7b9ae19a1b12 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41045 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Dabros Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-05-18soc/amd/picasso: add telemetry settingChris Wang
Add telemetry setting for SDLE testing BUG=b:147570294 TEST=Build Morphius and check the setting was been applied Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If4bb75eeaaa68b2c5a6a36c28c34fb338be65851 Reviewed-on: https://chromium-review.googlesource.com/2056885 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com> Tested-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-18soc/amd/picasso/romstage: add missing types.h includeFelix Held
Change-Id: I26f15e7bd2f65e94ed1c2771bd8504114bfcda48 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-05-18src: Remove unused 'include <string.h>'Elyes HAOUAS
Unused includes found using following commande: diff <(git grep -l '#include <string.h>' -- src/) <(git grep -l 'memcpy\|memmove\|memset\|memcmp\|memchr\|strdup\|strconcat\|strnlen\|strlen\|strchr\|strncpy\|strcpy\|strcmp\|strncmp\|strspn\|strcspn\|atol\|strrchr\|skip_atoi\|STRINGIFY' -- src/) |grep -v vendorcode |grep '<' Change-Id: Ibaeec213b6019dfa9c45e3424b38af0e094d0c51 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-05-18mb/lenovo/{x230, t430s}: add H8_HAS_PRIMARY_FN_KEYS for {x230s, t431s}Bill XIE
X230s and T431s have keyboard similar to the one found on t440p, so H8_HAS_PRIMARY_FN_KEYS and related cmos options may apply to them. Tested on both X230s and T431s. Change-Id: I234820b92093acdd64ff60cae39015547b6e981e Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41403 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18soc/amd/picasso/Makefile: Use apcb_tool to generate APCBs from SPDsRaul E Rangel
BUG=b:147042464 TEST=Boot trembyle to OS Signed-off-by: Rob Barnes <robbarnes@google.com> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ife48d5268230f70c6a6f4a56c1f0d05b6c924891 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41381 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18util/apcb: Add apcb_edit toolRob Barnes
On the Picasso architecture, the PSP is responsible for setting up DRAM before releasing the x86. The APCB (AGESA PSP Configuration Block) contains multiple SPDs and the GPIO numbers used to select the correct SPD. Since the source to build the APCBs is not public, it can't be built as part of the coreboot build. To work around this problem, we use a template APCB and inject the relevant information. BUG=b:147042464 Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I88a09743f8e8a184c47071ee5e417f5b6bdb7467 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2123799 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-18src: Remove unused 'include <lib.h>'Elyes HAOUAS
Change-Id: Iad5540e791075270453a136a058823c28647f93a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-05-18mb/google/{parrot,stout}: Remove unused 'include <elog.h>'Elyes HAOUAS
Change-Id: I7c6f47f03f1c83658f4364f81f6436d7b2f4f377 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-183rdparty/libgfxinit: Update submodule pointer, againBill XIE
6b95507ec5b087658178a325bdc68570bc48bb20 has mistakenly reverted the submodule pointer of 3rdparty/libgfxinit to cdbfce27, canceling c844d14ca5081b2cb2f1036bdf0c2112405342d1. This commit sets it back, recovering c844d14c. Change-Id: Ib594e40a39ea83dd2238becb287f2516e7c54046 Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41400 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18libpayload: Fix definitions of minimum integer valuesYu-Ping Wu
Fix incorrectly defined constants INT16_MIN, INT32_MIN and INT64_MIN, which recursively call themselves. BRANCH=none BUG=none TEST=emerge-nami libpayload Change-Id: I1fa8402d318393de2e02f1e632ab78b6ec0768e8 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41391 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Joel Kitching <kitching@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18soc/intel/tigerlake: Add FSP UPD TcssDma0En and TcssDma1EnJohn Zhao
This adds FSP UPD TcssDma0En and TcssDma1En for configuration. BUG=:b:146624360 TEST=Built and booted on Volteer. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I04af970f74ab9dfe84f9c0c09ec2098e0093fa57 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41383 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-05-18vendorcode/intel/fsp: Update Tiger Lake FSP Headers for FSP v3163Srinidhi N Kaushik
Update FSP headers for Tiger Lake platform generated based FSP version 3163, which includes below additional UPDs: FSPM: TcssDma0En TcssDma1En FSPS: PchFivrExtV1p05RailEnabledStates PchFivrExtV1p05RailSupportedVoltageStates PchFivrExtVnnRailEnabledStates PchFivrExtVnnRailSupportedVoltageStates PchFivrExtVnnRailSxVoltage PchFivrExtV1p05RailIccMaximum CstateLatencyControl5TimeUnit VmdEnable BUG=none BRANCH=none TEST=build and boot ripto/volteer Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Icc893073629df59aef60162bed126d1f4b936e90 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41377 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18util/cbfstool: fix buffer over-readPhilipp Bartsch
Fix unterminated array. When looking for a type not specified in filetypes (cbfs.h:204), the loop in lookup_name_by_type (cbfs_image.c:60) will run into a buffer over-read. Found-by: AFL++ 2.64d rev 1317433 Signed-off-by: Philipp Bartsch <phil@grmr.de> Change-Id: Ib82bb92e82b09fa1e26b9ca34529ec7b98e8f7b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41421 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18soc/amd/picasso: Switch to using amd_blobsRaul E Rangel
BUG=b:147042464 TEST=build trembyle and boot to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ie6ac8b0701ac27733dd9724873664f5f17fcfa29 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41435 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-18soc/amd/picasso: only link soc_util in ramstageFelix Held
No code that was or will be upstreamed uses functionality from soc_util in romstage, so only compile and link it for ramstage. This also allows to fix the SoC type detection in a follow-up patch using information that FPS-M will be providing in a HOB. BUG=b:153779573 Change-Id: If96e53608eadd562f6de5a0c370b89e84e43d049 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-18device/pci_device: Remove useless pci_bus_ops_pciTim Wawrzynczak
The struct (formerly assigned to default_pci_ops_bus.ops_pci) only contained a NULL (well, 0) pointer for the set_subsystem callback, but usage of that callback is guarded with NULL checks when it is used, therefore it can be removed. TEST=still compiles Change-Id: I3943c8ae73b95e744a317264d7ceb8929cb28341 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41432 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18broadwell: update processor power limits configurationSumeet R Pawnikar
Update processor power limit configuration parameters based on common code base support for Intel Broadwell SoC based platforms. BRANCH=None BUG=None TEST=Build for broadwell based platform Change-Id: I97e38a533e74a122b6809e20a10f6e425827ab9c Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-18mb/portwell/m107: Remove direct 'include <soc/gpio.h>'Elyes HAOUAS
Don't directly include <soc/gpio.h>. All code using GPIO features should always and only include <gpio.h>, which should indirectly include the SoC-specific <soc/gpio.h>. Change-Id: I78f1e250570f1b395c61115d4a872b24b3d58f69 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-05-18mb/facebook/fbg1701: Remove direct 'include <soc/gpio.h>'Elyes HAOUAS
Don't directly include <soc/gpio.h>. All code using GPIO features should always and only include <gpio.h>, which should indirectly include the SoC-specific <soc/gpio.h>. Change-Id: Id2663398b9f069ab1f60d63016ea7aa080f66d20 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-05-18mb/google/hatch: Add Mushu variant specific DPTF parametersJohn Su
The change applies the DPTF parameters received from thermal team. 1. Set PL1 Max to 25W 2. Set PL2 Max to 44W 3. Update Temp sensor parameters BUG=b:152011093 BRANCH=none TEST=build and verified by thermal team Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I225897832b02f9de6221053b68fbdba30f8b199a Reviewed-on: https://review.coreboot.org/c/coreboot/+/41165 Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18soc/intel/jasperlake: Add function to display ME firmware status infoKrishna Prasad Bhat
Add function to display ME Host Firmware Status registers. Make use of print_me_fw_version() from CSE lib to print ME firmware version information. Add manufacturing mode field in HFSTS1 register for JSL in place of, spi_protection_mode in TGL. BUG=None BRANCH=None TEST=Build and boot jslrvp. In coreboot logs, ME info can be seen. ME: Version: 13.5.0.7049 ME: HFSTS1 : 0x90006255 ME: HFSTS2 : 0x82100136 ME: HFSTS3 : 0x00000020 ME: HFSTS4 : 0x00004800 ME: HFSTS5 : 0x00000000 ME: HFSTS6 : 0x00400006 ME: Manufacturing Mode : YES ME: FW Partition Table : OK ME: Bringup Loader Failure : NO ME: Firmware Init Complete : YES ME: Boot Options Present : NO ME: Update In Progress : NO ME: D0i3 Support : YES ME: Low Power State Enabled : NO ME: CPU Replaced : YES ME: CPU Replacement Valid : YES ME: Current Working State : 5 ME: Current Operation State : 1 ME: Current Operation Mode : 0 ME: Error Code : 6 ME: CPU Debug Disabled : YES ME: TXT Support : NO Change-Id: Ic6b1c9410db8f06ac24fd997772b2ede04264bee Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-18mb/google/deltaur: Remove DSP settingEric Lai
Deltaur does not use DSP so remove the DSP setting. BUG=b:155360937 TEST=Recording and playing are working fine in OS. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I01c076806448fc73980ec02e7558ccf082723d92 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41423 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-18mb/google/deltaur: Add audio verb tableEric Lai
Add audio verb table provided by vendor. BUG=b:156447983 TEST=Have beep sound when run "devbeep" in CLI. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I807d84de1677459ea027e645488f485b0ac7b2ac Reviewed-on: https://review.coreboot.org/c/coreboot/+/41401 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18mb/google/deltaur: Update audio settingEric Lai
Deltaur uses HDA codec so we need to set iDisplay Audio Codec disconnection and enable HdaAudioLink, otherwise the HDA codec won't respond to commands to execute HDA verbs. BUG=b:156447983 TEST=No timeout error when run "devbeep" in CLI. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I15d2895866abcf68963c9732ed5d05f32096fc92 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41397 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18soc/intel/tigerlake: Add PchHdaIDispCodecDisconnect overrideEric Lai
This is a missing config override in fspm_upd. iDisplay Audio Codec disconnection 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable. BUG=b:156447983 TEST=None Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ifbbc22d14e06713009c550cbe8a7292de64e1fdc Reviewed-on: https://review.coreboot.org/c/coreboot/+/41394 Reviewed-by: Kane Chen <kane.chen@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18mb/google/dedede: update SPD name based on DRAM characteristicMarco Chen
The index of DRAM_STRAPS indicates to a specific DRAM characteristic instead of a DRAM part number therefore update the existing DRAM SPD binary to the naming by DRAM characteristic. BUG=b:152019429 BRANCH=None TEST=build the image and verify that coreboot log shows the correct SPD info Change-Id: I8ffcf156f37a465209740c5e2a34effb5f1f5d5c Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-18skylake: update processor power limits configurationSumeet R Pawnikar
Update processor power limit configuration parameters based on common code base support for Intel Skylake SoC based platforms. BRANCH=None BUG=None TEST=Built and tested on nami system Change-Id: Idc82f3d2f805b92fb3005d2f49098e55cb142e45 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 02:40:05 +0000