summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-20soc/intel/xeon_sp/skx: Clean up FADTAngel Pons
Both `acpi_fill_fadt` and `soc_fill_fadt` set many FADT fields. Since the latter runs later, the values programmed in it overwrite any other values. Drop unused assignments and consolidate everything in a single function. Use `acpi_fill_fadt` as it is mandatory (no weak definition). Change-Id: Ia8248f20dae2b93426f309605bb2076592b08df4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43386 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20sb/intel/i82371eb: Declare reset register in FADTAngel Pons
According to Intel Order Number 290562 (PIIX4 datasheet), 0xcf9 is the reset register, and setting bits 1 and 2 will result in a hard reset. Change-Id: Id5ada6a10b2269d51908c6a5fd7745ef6c33a29a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-20sb/intel/i82801dx: Declare reset register in FADTAngel Pons
According to Intel Document 290744 (ICH4 datasheet), 0xcf9 is the reset register, and setting bits 1 and 2 will result in a hard reset. Change-Id: Id1a532857d9643d222d61c3902faadd471ae2a9a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-20sb/intel/i82801dx: Drop unneeded PM2 settings from FADTAngel Pons
The PM2_CNT register block is not present on this southbridge, as per Intel Document 290744 (ICH4 datasheet). Also, the ACPI specification, version 6.3, section 4.8.1.3 (PM2 Control Register), says: This register block is optional, if not supported its block pointer and length contain a value of zero. Since the FADT struct defaults to zero in coreboot, we don't need to do anything to indicate PM2_CNT is not supported. So, drop unneeded values. Also delete a comment about `pm2_cnt_len`, which said that the right value differs from zero. Looks like that comment was wrong instead. Change-Id: Icbb32f5db7b368c764b3477c40f8ae9c788df5ee Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43383 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20sb/intel/i82371eb: Drop unneeded PM2 settings from FADTAngel Pons
The PM2_CNT register block is not present on this southbridge, according to comments on the code. As per the ACPI specification, version 6.3, section 4.8.1.3 (PM2 Control Register): This register block is optional, if not supported its block pointer and length contain a value of zero. Since the FADT struct defaults to zero in coreboot, we don't need to do anything to indicate PM2_CNT is not supported. So, drop unneeded values. Change-Id: Ib3ff0fd9e0725f61c38e60ba56b95e6e77b0b1ed Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43382 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20amd/{hudson,stoney,picasso}: Drop PM2 settings from FADTAngel Pons
The PM2_CNT register block is no longer needed, as explained in some comments. While they may have been copy-pasted around a lot, they are at least true for Hudson, and it makes sense to assume that they are true for newer chipsets as well. As per the ACPI specification, version 6.3, section 4.8.1.3 (PM2 Control Register): This register block is optional, if not supported its block pointer and length contain a value of zero. Since the FADT struct defaults to zero in coreboot, we don't need to do anything to indicate PM2_CNT is not supported. So, drop unneeded values. Change-Id: Iabc7985c84aabe40ad98fdc9fc6ccbbab0a516c1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43381 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20src: Drop useless PM1b settings from FADTAngel Pons
None of the currently-supported chips has PM1b_EVT nor PM1b_CNT event register blocks. According to the ACPI specification, version 6.3, sections 4.8.1.1 and 4.8.1.2 (PM1 Event/Control Registers): If the PM1b_EVT_BLK is not supported, its pointer contains a value of zero in the FADT. If the PM1b_CNT_BLK is not supported, its pointer contains a value of zero in the FADT. Since the FADT struct defaults to zero in coreboot, we don't need to do anything with PM1b for now. So, drop unneeded writes to PM1b fields. Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of the patch train, both operating systems are able to boot successfully. Change-Id: Iff788b2ff17ba190a8dd9b0b540f1ef059a1a0ea Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43380 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20src: Drop useless GPE1 settings from FADTAngel Pons
None of the currently-supported chips has a GPE1 block. The ACPI spec, version 6.3, section 4.8.1.6 (General-Purpose Event Registers) says: If a generic register block is not supported then its respective block pointer and block length values in the FADT table contain zeros. Since the FADT struct defaults to zero in coreboot, we don't need to do anything with GPE1 for now. So, drop the unneeded writes to GPE1 fields. Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of the patch train, both operating systems are able to boot successfully. Change-Id: Iefc4bbc6e16fac12e0a9324d5a50b20aad59a6cd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43379 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20mb/google/puff: update USB3 gen2 parametersTim Chen
Based on USB3 gen2 SI report to fine tune the parameters for USB3 gen2. BRANCH=none BUG=b:150515720 TEST=build and check the USB3 gen2 register on DUT is correct. Change-Id: I6ec109871d682a1ae2fa4c22fdd6b87ad8a39e9e Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43482 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jamie Chen <jamie.chen@intel.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-07-20soc/intel/cannonlake: Add configs for USB 3.1 Gen2 EV settingsJamie Chen
Add configs for USB 3.1 Gen2 EV settings so that people can set the EV settings per board in device tree. BUG=b:150515720 BRANCH=none TEST=build coreboot and fsp with enabled fw_debug. Flashed to puff and checked the log. All usb configs were set correctly. Signed-off-by: Jamie Chen <jamie.chen@intel.com> Change-Id: Id4860665619095139c329565d433d9eb495cac02 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39448 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20mb/asrock/b85m_pro4: Enable VGA portAngel Pons
Now that libgfxinit has been fixed, trying to enable the Analog port no longer hangs the system, nor fills the monitor with unreadable garbage. Tested with linear framebuffer, displays correctly on a 1920x1080 VGA monitor. Scaling also works when a smaller HDMI monitor is connected as well. Legacy VGA text mode is also functional on either monitor, too. Change-Id: Ie2f88edcb7ed1984adebf2af23195767af13654c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43560 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-203rdparty/libgfxinit: Update submodule pointerAngel Pons
This brings in 4 new commits: * c0db994 common/Makefile.inc: Factor out generation TLAs * 3f86b0b Move `PSR_Off` out of `Power_And_Clocks_Haswell` * 450c24c haswell: Make VGA on FDI work * 3318bf2 Drop generation suffix from `Power_And_Clocks` Change-Id: I023b0c2bb403b3a9c9fe575a78cd2cf2f20b112a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-203rdparty/libhwbase: Update submodule pointerAngel Pons
This brings in 5 new commits: * 69e9086 mutime: Make Sinfo an imported constant * 9f87a10 time: Add T_First constant * 4e22910 Makefile: Adapt $(space) definition * d822df5 Makefile: Delay expansion of `$(ADAFLAGS)` * a3edc6e Makefile: Add `-gnatw_R` to suppress spurious warning Change-Id: I907e66fcf85da256a112a7069a3c551a6d8caaf0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43558 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20vendorcode/intel/fsp: Update Tiger Lake FSP Headers for FSP v3274Srinidhi N Kaushik
Update FSP headers for Tiger Lake platform generated based FSP version 3274. Compared to the current version 3197, v3274 adds most of the legacy UPDs in both FSPM and FSPS. BUG=b:159151231 BRANCH=none TEST=build and boot volteer proto2 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Id3f957aa9d9ad9710a3c930717c22f485699315e Reviewed-on: https://review.coreboot.org/c/coreboot/+/43473 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-19sio/nuvoton/common/early_serial.c: Guard serial enableAngel Pons
If CONSOLE_SERIAL is not set, do not reconfigure the UART LDN. Otherwise, SerialICE stops working when the UART LDN is disabled. Change-Id: Ie3113e6b7b830dfdddc4d7709f00719f29e094bf Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-19soc/intel/common/gpio_defs: Fix coding styleMaxim Polyakov
Tested with BUILD_TIMELESS=1, Kontron COMe-mAL10 on T10-TNI carrierboard does not change. Change-Id: Ib4b4c28153398b6275728b28bda90e527d97e823 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41035 Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Reviewed-by: Michael Niewöhner Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-19mb/qemu-i440fx/memmap: Add warning when falling back to CMOS infosNico Huber
Change-Id: Iefac6fd45791cf6a051450b41046f7e7ebc1dc41 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-19mb/qemu/fw_cfg: Fix return code check for fw_cfg_e820_select()Nico Huber
Change-Id: I22b9eb6ead37dbba6807d145468843bd01c94c84 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43445 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-19mb/qemu/fw_cfg: Add info messages about (not) found filesNico Huber
Print some more information at BIOS_INFO, like our CBFS code does. Change-Id: I1431d569c57634277ea5cf7feb352419db432b44 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43444 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-18Documentation: Add documentation for drivers/intel/dptf chip driverTim Wawrzynczak
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I8915ead08a89dcf95fd92983eca5f85b82916dfd Reviewed-on: https://review.coreboot.org/c/coreboot/+/43533 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-18ec/google/chromeec: Fix oversights in ec_dptf_helpersTim Wawrzynczak
GTSH was 2 instead of 20 (so it's 2 degrees K hysteresis), and TSRD was accidentally defined to take 0 arguments, instead of 1. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I14d28bacf44ac65043060b8579b3fbcec758c56c Reviewed-on: https://review.coreboot.org/c/coreboot/+/43532 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-07-18ec/google/chromeec: Fix \_SB.DPTF._OSCTim Wawrzynczak
The DPTF._OSC method incorrectly assumed that all available UUIDs would be present in the IDSP package, but this is not always the case. Instead of matching an incoming UUID against an index into IDSP, search the IDSP package for the matching UUID. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I718b6abe09152647b14f7c1405b2d0d20035726b Reviewed-on: https://review.coreboot.org/c/coreboot/+/43531 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-07-18mb/google/dedede: Convert static DPTF ASL into devicetree entriesTim Wawrzynczak
Since there is now a mechanism to generate DPTF ACPI tables and methods at runtime, dedede should switch to using that instead of raw ASL files. This patch converts the existing .asl files into devicetree entries. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I6bb6e6e15f50a1e510080e16bbca09dfc5f16b1a Reviewed-on: https://review.coreboot.org/c/coreboot/+/43422 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-18drivers/intel/dptf: Add missing scope operator around TSR optionsTim Wawrzynczak
The previous DPTF patch train missed the proper scope operator around all of the TSR options. Without this, the optional GTSH and/or _STR Methods end up in the wrong scope. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I9298c442c047c5f7f606574d900057a7c004b47f Reviewed-on: https://review.coreboot.org/c/coreboot/+/43458 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-18dptf: Fix scope of TCPU deviceTim Wawrzynczak
In the initial DPTF refactor, the scope of the TCPU device was incorrectly set as \_SB, instead of \_SB.PCI0. However, because of the way that the acpi_inject_dsdt() callback currently works (it injects contents before the dsdt.aml file), the Scope where the TCPU device lives (\_SB.PCI0) doesn't exist yet. Therefore, to avoid playing games with *when* things are defined in the DSDT, switch to defining all of the DPTF devices in the SSDT. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ia4922b4dc6544d79d44d39e6ad18c6ab9fee0fd7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43529 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-18mb/google/volteer: Update DPTF with temp sensor 3Tim Wawrzynczak
While the DPTF refactor was in progress, TSR3 was added to volteer's dptf.asl file, and I forgot to update the devicetree with TSR3 as well. Also missed a swap in the passive policies of TSR0 and TSR1. This patch fixes those. BUG=b:149722146 TEST=boot volteer, dump SSDT & DSDT, verify TSR3._STA returns 0xF Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I71bc798492ec45bb1e2f8d779e6829db52ef4499 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Deepika Punyamurtula <deepika.punyamurtula@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-07-17mb/google/zork/var/vilboz: Use AMDI1015 HID for I2S machine deviceFurquan Shaikh
Vilboz requires a different HID than rest of the zork variants. Hence, this change sets the HID to AMDI1015 for I2S machine device in vilboz overridetree.cb. BUG=b:157708581 Change-Id: Ibae343f21cf8f0c782dc8a461f69172bf0da7eba Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43545 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17soc/amd/picasso: Drop the addition of I2S machine device from ACP driverFurquan Shaikh
I2S machine device has its own driver now. So, this change drops the support for adding I2S machine device ACPI node from ACP driver. BUG=b:157708581 Change-Id: I9069d92ae991e05fddcc7d45a2fd21e98c3b0de8 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-17mb/google/zork: Switch to using newly added i2s_machine_dev driverFurquan Shaikh
This change switches zork devices to use the newly added i2s_machine_dev driver in devicetree rather than passing dmic_select_gpio in SoC config. BUG=b:157708581 Change-Id: I76c633694cbfb454c081ab2a4af4765bfbbae16b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-17soc/amd/picasso: Add .scan_bus operation for ACP deviceFurquan Shaikh
This change adds `.scan_bus` device operation for ACP device to allow mainboards to add devices under it. BUG=b:157708581 Change-Id: I088bf81d7c7c5f59ade1d2f0dd24e5fc2b1ff876 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43542 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17drivers/amd/i2s_machine_dev: Add a driver for AMD I2S machine deviceFurquan Shaikh
This change adds a new driver for AMD I2S machine device. Currently, this device is added as part of `acp_fill_ssdt()` in Picasso, but with addition of this driver, this device can be added just like any other device in the devicetree. BUG=b:157708581 Change-Id: I49d1a867d7941397acca1054632b6ad855a021de Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43541 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-17device: Increase DEVICE_PATH_MAX to 40Furquan Shaikh
This change increases the maximum length of device path string to 40 characters to accommodate growing hierarchy of devices. TEST=Ensured that "\_SB.PCI0.LPCB.EC0.CREC.TUN0.RT58" is correctly added to SSDT. Change-Id: Id2ef71a32b26e366b56c652942a247de4889544a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43540 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-17mb/asrock/b85m_pro4: Select MAINBOARD_USES_IFD_GBE_REGIONAngel Pons
This board uses the in-PCH GbE controller, and its IFD has a GbE region. Change-Id: Ifc09640b2ebd613d3d5566a13b50d36c11e3c346 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43522 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17soc/amd/common/gpio: Add macro for PAD_NCFurquan Shaikh
This change adds a macro `PAD_NC` for configuring no-connect pads. This configures the pad as input with pull-down. Change-Id: I47c41c88ccfebe2c5dd9a24f85a120af9c8f56b5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43521 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-17mb/amd/mandolin: Drop mainboard.aslFurquan Shaikh
This change drops mainboard.asl from zork because none of the objects defined in it are used. Change-Id: I879b5614fb5d12c4814ee52f840a000744a7aab9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43520 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17mb/google/zork: Drop mainboard.aslFurquan Shaikh
This change drops mainboard.asl from zork because none of the objects defined in it are used. BUG=b:153879530 Change-Id: If5440bcbce39b4461b44acaec69561663b1ea329 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43519 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17soc/amd/picasso: Drop _INI and OSFL methodsFurquan Shaikh
This change drops _INI and OSFL methods under \_SB since they are not doing anything useful. _INI only calls OSFL and OSFL initializes OSVR if not already initialized and returns OSVR value. However, OSVR is not used anywhere and hence both these functions can be dropped. BUG=b:153879530 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I4f3e1c93a855006cc115087fded20bfb76c1133e Reviewed-on: https://review.coreboot.org/c/coreboot/+/43515 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17soc/amd/picasso: Move PMOD global variable to globalnvs.aslFurquan Shaikh
Global variable `PMOD` that stores the interrupt mode used by OS is required by all mainboards. This change moves the variable definition to globalnvs.asl under picasso. Additionally, ACPI spec says that BIOS should assume interrupt mode as PIC until _PIC() method is called by OS. Thus, this change also updates the default value of PMOD as 0 i.e. PIC mode. BUG=b:153879530 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I731c03d965882281a7a23f55894451210ba72274 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43514 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17soc/amd/picasso: Drop empty method CIRQFurquan Shaikh
This change drops empty method CIRQ() from pci_int.asl. BUG=b:153879530 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ib342dcbc52cfacbd73a8a50ee087d97562d94c97 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43513 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17mb/google/zork: correct wake gpe value for gpio 9Aaron Durbin
GPIO_9 is associated with gevent 22. Correct all the misconfigurations and use macros for clarity as to what bit offset is being used instead of open coding things. BUG=b:161205804 Change-Id: Ic4cfd62763d72d12a55f89585f24e07df6af0f4f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43516 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17soc/amd/picasso: Use read-modify-write for ACP_I2S_PIN_CONFIGFurquan Shaikh
This change uses read-modify-write to update ACP_I2S_PIN_CONFIG instead of a write operation since the other bits in the register are reserved. Change-Id: Ic64e1907858ec293c5f759e627d19c00d748a30e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43503 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17mb/google/zork: Enable ACP_PME_EN and ACP_I2S_WAKE_ENFurquan Shaikh
This change enables ACP_PME_EN and ACP_I2S_WAKE_EN for dalboz and trembyle boards using devicetree settings. BUG=b:161328042,b:146317284 Change-Id: Ie367a9ba878a1892177df874bbcb8005efeb0880 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43496 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17soc/amd/picasso: Configure ACP_PME_EN and ACP_I2S_WAKE_ENAkshu Agrawal
This change adds support for configuring ACP_PME_EN and ACP_I2S_WAKE_EN using the mainboard setting for `acp_pme_enable` and `acp_i2s_wake_enable` in the devicetree. This is required to get I2S_Wake event on headset jack plug/unplug when using CODEC_GPI pad. BUG=b:146317284,b:161328042 Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Change-Id: I522d7497940f499fbc3181d866f2b44e979bba7a Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/1969104 Reviewed-by: Raul E Rangel <rrangel@chromium.org> Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43495 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16soc/amd/picasso: remove unused fadt_pm_profile devicetree settingFelix Held
commit 56da63c3dc3f50cfac541c779b608e1bae9e635c removed overriding that field in the FADT. Change-Id: I0c8ff9ab125129dc856949c47a3a0c14e4109c73 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43417 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16mb/amd/mandolin: add SATA DXIO descriptor for Dali SKUsFelix Held
Dali supports two SATA ports, but no PCIe alternate function on those pins. Change-Id: I27a13100e80565eb1dade2d703ba3d1f8b5f630f Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43493 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-16mb/amd/mandolin: fix DXIO lane numbersFelix Held
The DXIO descriptors use the logical and not the physical lane numbers, which are different. Change-Id: I7a90056d782d8d32fe34a0f5bdb61c3b61df1af8 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43492 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-16soc/amd/common: Don't get eSPI address from PCI if not on x86Martin Roth
Exclude lpc_get_spibase() on the PSP. This also simplifies the espi_get_bar() function. BUG=b:159811539 TEST=Build & boot trembyle; Verify address in PSP & x86 Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I5927dd40610860b54bb35a7e5b03ddb731597745 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43468 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16soc/amd/picasso: Get rid of VERSTAGE_SIZEMartin Roth
Currently, the code and data in psp_verstage is ~59K. Adding the code to save vbnv to the SPI rom increases that to 66K. Getting rid of VERSTAGE_SIZE allows verstage to grow as it needs to. BUG=b:161366241 TEST=Build & Boot Morphius with VBOOT_VBNV_CMOS_BACKUP_TO_FLASH enabled Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Ic6853b70073f9e781fc10402a2a47c9c8e0d49d3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43486 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16soc/amd/stoneyridge: Remove unused SPI #definesMartin Roth
These #defines are not used, and conflict with #defines in amdblocks/spi.h BUG=None TEST=Build stoney platforms Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I29b77a6b21a4deda6f28f5b057988cf3921540e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-07-16soc/amd/picasso/acpi,mb/{zork,mandolin}: Stop clearing PciExpWakeStatusRaul E Rangel
The kernel already clears this: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/master:src/third_party/kernel/v5.4/drivers/acpi/acpica/hwregs.c;l=390 No reason to have the firmware do it as well. BUG=b:153001807, b:154756391 TEST=Build Trembyle, boot, suspend, and resume and didn't see any ACPI errors. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ia5c79fb95dc885eaef8abc4257b6ba18c1ef1b66 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-16soc/amd/picasso,mb/{zork,mandolin}: Remove invalid UPWS variableRaul E Rangel
PMx0EE is not defined in the Picasso PPR. BUG=b:153001807, b:154756391 TEST=None Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I98caf0cd2d0bdcf19de2b945dcf74f5cf7354769 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-16mb/amd/mandolin/.../sleep.asl: Remove unnecessary variableRaul E Rangel
There is no reason to create a named variable. We can just return the package. BUG=b:153001807, b:154756391 TEST=None Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ic0ca2e6d4fb833c68d29e9948a670ace7c89b6a5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-16libpayload: allow nonblocking delay and more than one delayRonald G Minnich
Extend the local APIC timer delay so that it can be started, and waited for, independently. Add an EOI so that more than one APIC timer interrupt is possible. Previous to this, because there was no EOI, the first timer interrupt the CPU took was also the last it would take -- apic_delay would only work one time. Change-Id: Ib11aeee5b7da81287166ac68fc327e7ae62d1b84 Signed-off-by: Ronald G Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-07-16soc/amd/picasso: Drop mainboard_romstage_entry_s3Furquan Shaikh
mainboard_romstage_entry_s3() was dropped from zork (CB:43476). This function call in picasso does not do anything and hence is being dropped. BUG=b:154351731 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I10e15422d7eef5af9c19737c32e433718b6479d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43477 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16mb/google/zork: Move variant_pcie_gpio_configure() to bootblockFurquan Shaikh
On zork, bootblock is part of RW firmware in non-recovery mode, so PCIe GPIOs can be configured early on in bootblock rather than waiting until romstage. This change moves the call to variant_pcie_gpio_configure() to happen in bootblock and drops romstage.c file. BUG=b:154351731 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ic515304f35fe5623d58d6000efcb11fb9039e137 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43476 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16mb/google/zork: Drop variant_romstage_gpio_table()Furquan Shaikh
gpio_set_stage_rom table is now configuring only PCIe related GPIOs in romstage. This change moves the configuration of PCIe related GPIOs to variant_pcie_gpio_configure() to keep all the configuration for WiFi and non-WiFi PCIe pads in one place. It also drops the function variant_romstage_gpio_table() as it is unused. BUG=b:154351731 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ib1c41ba141dce6b52b6e0a250a3aa07c296068aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/43475 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16mb/google/zork: Drop redundant romstage GPIO tableFurquan Shaikh
Now that the power and reset GPIO configuration for non-PCIe devices is dropped from romstage GPIO table, the tables for pre-v3 and v3 version of schematics are exactly same. So, this change drops the duplicate table and also removes the check for v3 schematics when configuring the pads in romstage. BUG=b:154351731 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I67ca9f587c3f47912393ebaf38badcc9d76cc393 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-16mb/google/zork: Drop power and reset control in romstage for dalbozFurquan Shaikh
This change drops power and reset control for non PCIe devices in romstage for dalboz reference as this is not required. +---------------------------------------------------------------------------------------+ | GPIO| Net name | External| Internal| Domain| State at reset | State on S3 resume | | # | | Pull | Pull | | | | +---------------------------------------------------------------------------------------+ | 5 | PEN_POWER_EN | 100K PD | PD | S5 | Powered off | Powered on | | | | | | | (because of | (since power is not| | | | | | | internal PD) | disabled when | | | | | | | | entering S3) | +---------------------------------------------------------------------------------------+ | 6 |EN_PWR_TOUCHPAD| 499K PD | PU | S5 | Powered on | Powered on | | | | | | | (because of | (since trackpad | | | | | | | internal PU) | is wake source) | +---------------------------------------------------------------------------------------+ | 68 | EMMC_RESET_L | 100K PU | PD | S0 | Asserted | Asserted | | | | | | | (because of | (because of | | | | | | | internal PD) | internal PD) | +---------------------------------------------------------------------------------------+ | 76 | EN_PWR_CAMERA | 499K PD | PD | S0 | Powered off | Powered off | | | | | | | (because of | (because of | | | | | | | internal PD) | internal PD) | +---------------------------------------------------------------------------------------+ | 140 | USI_RESET | 10K PD | PD | S0 | Deasserted | Deasserted | | | | | | | (because of | (because of | | | | | | | internal PD) | internal PD) | +---------------------------------------------------------------------------------------+ | 141 | USB_HUB_RST_L | 10K PU | PD | S0 | Asserted | Asserted | | | | | | | (because of | (because of | | | | | | | internal PD) | internal PD) | +---------------------------------------------------------------------------------------+ +---------------------------------------------------------------------------------------+ | 67 |EN_PWR_TOUCHPAD| 10K PU | PD | S0 | Powered off | Powered off | | |_PS2 (pre-V3) | | | | (because of | (because of | | | | | | | internal PD) | internal PD) | +---------------------------------------------------------------------------------------+ GPIO_140 starts deasserted out of reset and S3 resume, but gets asserted in ramstage since it is eventually deasserted by OS using ACPI methods. BUG=b:154351731 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ie792a5a9d6420763ff10d1e475c094b6ee514888 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-16mb/google/zork: Drop power and reset control in romstage for trembyleFurquan Shaikh
This change drops power and reset control for non PCIe devices in romstage as this is not required. +---------------------+--------------------------------------------+--------------------+ | GPIO| Net name | External| Internal| Domain| State at reset | State on S3 resume | | # | | Pull | Pull | | | | +---------------------------------------------------------------------------------------+ | 5 | PEN_POWER_EN | 100K PD | PD | S5 | Powered off | Powered on | | | | | | | (because of | (since power is not| | | | | | | internal PD) | disabled when | | | | | | | | entering S3) | +---------------------------------------------------------------------------------------+ | 13 |EN_PWR_TOUCHPAD| 499K PD | PU | S5 | Powered on | Powered on | | |_PS2 | | | | (because of | (since trackpad | | | | | | | internal PU) | is wake source) | +---------------------------------------------------------------------------------------+ | 68 | EMMC_RESET_L | 100K PU | PD | S0 | Asserted | Asserted | | | | | | | (because of | (because of | | | | | | | internal PD) | internal PD) | +---------------------------------------------------------------------------------------+ | 76 | EN_PWR_CAMERA | 499K PD | PD | S0 | Powered off | Powered off | | | | | | | (because of | (because of | | | | | | | internal PD) | internal PD) | +---------------------------------------------------------------------------------------+ | 140 | USI_RESET | 10K PD | PD | S0 | Deasserted | Deasserted | | | | | | | (because of | (because of | | | | | | | internal PD) | internal PD) | +---------------------------------------------------------------------------------------+ +---------------------------------------------------------------------------------------+ | 67 |EN_PWR_TOUCHPAD| 10K PU | PD | S0 | Powered off | Powered off | | |_PS2 (pre-V3) | | | | (because of | (because of | | | | | | | internal PD) | internal PD) | | | | | | | | | +-----+---------------+---------+---------+-------+----------------+--------------------+ GPIO_140 starts deasserted out of reset and S3 resume, but gets asserted in ramstage since it is eventually deasserted by OS using ACPI methods. BUG=b:154351731 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ieadc62f1a13857209cf0a62f204efb9278e0e97d Reviewed-on: https://review.coreboot.org/c/coreboot/+/43462 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-16mb/google/zork: Keep USI_RST asserted in ramstageFurquan Shaikh
This change keeps USI_RST(GPIO_140) asserted in ramstage since it gets deasserted by OS using ACPI methods. BUG=b:160854397 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I8feced788e471a0efb2358d42b2146df04fb7a0c Reviewed-on: https://review.coreboot.org/c/coreboot/+/43461 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16mb/google/zork: Keep pen power enabled in sleep stateFurquan Shaikh
This change keeps pen power enabled in sleep state to allow it to charge in S3. BUG=b:155422911 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I6190496653878327f34a01f6a743db474d32e929 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43452 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16Revert "mb/ocp/deltalake: Select IPMI OCP to send POST start/end command"Philipp Deppenwiese
This reverts commit a5ca4a0c75237093f1a4d90f30c0c932e5fcd05d. Reason for revert: Breaks coreboot tree because of non existent kconfig symbol Change-Id: Ib8f55dc2f6444690945bc2dc64baad5d0c39cdf4 Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43069 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-16soc/intel/common/block/pmc: Select PMC on mainboard basisTim Chu
Currently the common soc code automatically selects POWER_STATE_DEFAULT_ON_AFTER_FAILURE which making other mainboard options unselectable. However, there're some cases that power state should change to different states after reapplying power. Make POWER_STATE_DEFAULT_ON_AFTER_FAILURE default y but do not select it in soc code so that we can disable it and select other options in the mainboard code. Tested on OCP Delta Lake. Signed-off-by: Tim Chu <Tim.Chu@quantatw.com> Change-Id: Ifa853d81ee9477d2440ceaa67b2bd6b863ee52c2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43338 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-16mb/ocp/deltalake: Select IPMI OCP to send POST start/end commandTimChu
Implement sending POST start/end command to BMC. TEST=Read POST command log in OpenBMC, if command received successfully, message may show as below, root@bmc-oob:~# cat /var/log/messages |grep -i "POST" 2020 May 28 13:21:22 bmc-oob. user.info fby3-v2020.20.2: ipmid: POST Start Event for Payload#1 2020 May 28 13:21:25 bmc-oob. user.info fby3-v2020.20.2: ipmid: POST End Event for Payload#1 root@bmc-oob:~# Signed-off-by: TimChu <Tim.Chu@quantatw.com> Change-Id: I38b512ee97c0eda6ba54482a448ef9ffc27b4ddb Reviewed-on: https://review.coreboot.org/c/coreboot/+/41993 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16mb/ocp/deltalake: Config PCH PCIe ports in devicetreeMorgan Jang
Tested on OCP Delta Lake with lspci checking if PCIe speed is changed are expected. Change-Id: I189027c403814d68db2b7c5f41fc254a293fe3a1 Signed-off-by: Morgan Jang <Morgan_Jang@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-07-16Documentation: Remove mention of manual checkpatch.pl invocationPatrick Georgi
We typically call checkpatch.pl through make lint which properly adds the option to tell checkpatch that our lines may be 96 columns long. However there's one mention of calling checkpatch directly and that confuses people with complaints about overly long lines that exceed 80 columns. The lint test that runs checkpatch (and with the right options) can also be used on a per-directory basis, so offer that instead. Change-Id: If21e925d2d2394c876724a44b0e23c9b2744c56b Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-16mb/google/kukui: Add new config 'willow'Sheng-Liang Pan
New board introduced to Kukui family. BUG=b:159194582 TEST=None BRANCH=kukui Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Icc6bcbd006008a05303693e481a54636f0645887 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43318 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16google/trogdor: Remove GPIO_AP_SUSPEND_LJulius Werner
This pin has been removed from recent revisions (or at least moved to a pin that's not controlled like a normal GPIO). It has also never been used on older ones (I think?). The same GPIO is now used as a SKU ID pin, so make sure we're not incorrectly configuring it as an output (although sku_id() overrides that later anyway, but it's still incorrect). BUG=b:160754995 Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I6e0d56e230d0bef172d7b78cc48263e9b6f059de Reviewed-on: https://review.coreboot.org/c/coreboot/+/43471 Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Philip Chen <philipchen@google.com> Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16mb/google/zork: Remove redundant PCI info from overridetreesRob Barnes
This information is redundant since it's already specified in baseboard/devicetree_trembyle.cb or baseboard/devicetree_dalboz.cb domain 0 is still required because sconfig uses it as an identity anchor to match devicetree and overridetree. BUG=b:157580724 TEST=Boot zork, usb functional Change-Id: I3c3c1c2410166b99599d7343fae3ee756f4da321 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43437 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15util/mb/google: add template files for dalboz and trembylePaul Fagerburg
Now that Zork is using upstream coreboot, we need the template files in the main branch. BUG=b:157570490 TEST=n/a Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Change-Id: I6cab4ab0b414473e0a759dce81df9872a40d3f26 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43419 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15cbgfx: Add blend functions to calculate transparencyShelley Chen
Up until now we have no way of adding transparency into our firmware screens. Add set_blend() and clear_blend() functions to store alpha value and rgb values to calculate alpha blending in calculate_colors(). BUG=b:144969091,b:160839199 BRANCH=puff TEST=dut-control power_state:rec press ctrl-d Ensure background is dimmed when dialog pops up Change-Id: I95468f27836d34ab80392727d726a69c09dc168e Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-07-15util/board-status: Reject logs with unknown timestampsPaul Menzel
Check the output of `cbmem -t` for unknown timestamps. If present, ask the user to rebuild `cbmem`. Change-Id: Ief7aa1a698f10d9721964ad1bee057fcd9f4aa40 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-07-15payloads/depthcharge: Makefile: resolve fail of concurrent buildMichael Niewöhner
Resolve missing dependency to fix concurrent building. Resolves: https://ticket.coreboot.org/issues/271 Change-Id: Idbd9155e01fcc4571a61f1bba5b2b4a446036da0 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43407 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-07-15mb/google/dedede: Enable SIS touchscreen for WaddledeeKarthikeyan Ramasubramanian
Add SiS9813 USI touchscreen support. BUG=b:160129126 TEST="emerge-dedede coreboot chromeos-bootimage", build successful. Change-Id: I42fdc5e8243d2c70c953b2f516c10f84a041c035 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43304 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15security/vboot: ensure that NVMEM is saved on every kernel space writeJett Rink
If the AP actually needs to write to the TPM, then it is important and the TPM should commit those changes to NVMEM immediately in case there is an unexpected power loss (e.g. from a USB-C port partner reset upon cold reboot request). BRANCH=none BUG=b:160913048 TEST=Verify that puff will no longer reboot loop when coreboot writes a new Hmir (Hash mirror) in the TPM Change-Id: I9597a55891d11bdf040d70f38b4c5a59c7888b8a Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43414 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15mb/google/volteer: Enable SATA Port Dito ConfigShaunak Saha
Enable SataPortsEnableDitoConfig for port 1. BUG=b:151163106 BRANCH=None TEST=Build and boot volteer. Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Change-Id: I552faaa0e7172e77208025cf4251bb848cc90709 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42415 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15soc/intel/tigerlake: Hook up SATA Port Enable DITO UPDsShaunak Saha
SataPortsEnableDitoConfig Enable DEVSLP Idle Timeout settings DmVal and DitoVal. SataPortsDmVal and SataPortsDitoVal helps to determine when to enter Device Sleep. Device Sleep enables the host bus adapter (HBA) to assert the DEVSLP signal as soon as there are no commands outstanding to the device and the port specific Device Sleep idle timer has expired. Device Sleep Idle Timeout values (PxDEVSLP.DITO and PxDEVSLP.DM) are port specific timeout values used by the HBA for determining when to assert the DEVSLP signal. They provides a mechanism for the HBA to apply a programmable amount of hysteresis so as to prevent the HBA from asserting the DEVSLP signal too quickly which may result in undesirable latencies. This patch is created based on Intel Tiger Lake Processor PCH Datasheet with Document number:575857 and Chapter number:12. * PxDEVSLP.DM -> SataPortsDmVal: Enable SATA Port DmVal DITO multiplier. Default is 15. * PxDEVSLP.DITO -> SataPortsDitoVal: Enable SATA Port DmVal DEVSLP Idle Timeout (DITO), Default is 625ms. BUG=b:151163106 BRANCH=None TEST=Build and boot volteer and TGL RVP. Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Change-Id: I6a824524738a9e0609f54bea9d892b4a42a1d3db Reviewed-on: https://review.coreboot.org/c/coreboot/+/42214 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15soc/amd/picasso/acpi: Delete unused and invalid OperationRegionsRaul E Rangel
0xc50, 0xc52, 0xc6f don't exist on Picasso. The PCI config space registers define SATA and OHCI which are at the wrong bus locations. I just remove the whole section since it's not used. We never access the PCIe Error region, or the PM2 region either. BUG=b:153001807, b:154756391 TEST=Build Trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I98aee09770f1df9f553c94580c1ee00c06a9cec1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-15soc/amd/picasso/acpi: Remove old AOAC register definitionsRaul E Rangel
We no longer need this code. It's been added differently in CB:42473. BUG=b:153001807, b:154756391 TEST=Build Trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I6fe1e465f137ba6afbf9f0dbce501b5fc845e210 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43426 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-15soc/amd/picasso/acpi: Remove invalid and unnecessary devicesRaul E Rangel
These devices are not referenced by anything else. BUG=b:153001807, b:154756391 TEST=None Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I6ea3c326247dce095b5ac1706dbc37f8b215a21e Reviewed-on: https://review.coreboot.org/c/coreboot/+/43425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-15mb/google/zork/.../sleep.asl: Remove unnecessary variableRaul E Rangel
There is no reason to create a named variable. We can just return the package. BUG=b:153001807, b:154756391 TEST=None Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I4f8f0362adf5ea5f026d0ba5ac6ac917fa160142 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43423 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-15PCI IDs: Add PCI ID for JSL DPTF/DTT PCI deviceTim Wawrzynczak
This PCI ID is required in order for JSL devices to perform SSDT generation for DPTF. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I42209d15bc4f1654814465ce1412576f7349dddc Reviewed-on: https://review.coreboot.org/c/coreboot/+/43421 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15util/intelmetool: Fix error messageEvgeny Zinoviev
Add a missing space to the message. Change-Id: I7d4042ebb587af8558294fb4961100b43910fd4a Signed-off-by: Evgeny Zinoviev <me@ch1p.io> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-07-15mainboard: Drop optional and empty ACPI \_BFS methodsAngel Pons
The ACPI specification, version 2.0 says: _BFS is an optional control method. So, remove them. They have been copy-pasted around quite a bit, and do not do anything useful. Plus, it's deprecated in later ACPI versions. Change-Id: I9ef21f231dd6051d410ac3a0fe554908409c2fa7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43443 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15amd/picasso: rework DXIO and DDI UPD handlingFelix Held
Turning the DXIO and DDI descriptor fields in the FSP_S_CONFIG struct into arrays allows to properly iterate over the fields. BUG=b:158695393 TEST=Mandolin still boots. Change-Id: I85debe4d52399e933768b89b665ff10c9f7779f8 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43434 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15vc/amd/fsp/picasso: replace #pragma pack(1) with __packed attributeFelix Held
Forgetting to add the #pragma pack() at the end of the header file can lead to hard to debug breakage, so get rid of the #pragma pack usage and add a __packed to the structs that need to be packed which has less possibly unwanted side effects. Since commit d44221f9c8f3686e040ff9481829315068b321a3 coreboot always includes commonlib/compiler.h which provides __packed. TEST=Timeless build results in identical binary. Change-Id: Icc53168f4fbc3a63a859f686b18e7023d225f8d2 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-15mb/lippert/frontrunner-af: Drop commented-out Kconfig symbolAngel Pons
Drop it before it grows moss. Change-Id: I0b4f5487cca3c864ba531cc6c78a20c2682fc43d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43287 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15mb/google/zork: Change SPI fast speed to 66mhzRob Barnes
Morphius cannot support 100Mhz fast SPI causing it to not boot. Downgrade all zork boards to fast=66mhz and normal=33mhz to be safe. BUG=b:161233767 TEST=Boot morphius Change-Id: I7744dd0cb8dede985fbdc28a64385e0bc4048402 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43459 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Eric Peers <epeers@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15mb/google/oak: Add new DRAM modules for oakwuxy
Add DRAM support for oak: Samsung K4E6E304ED-4GB # 1001 Nanya NT6CL512T32AM-H0-4GB # 1010 BUG=b:157702981 BRANCH=oak TEST=emerge-hana chromeos-ec coreboot chromeos-bootimage depthcharge, update FW to DUTs,these DUTs can pass 'memtester' test over 48 hours. Signed-off-by: Xingyu Wu <wuxy@bitland.corp-partner.google.com> Change-Id: I95eb51debac905145f16b83c9b74a2bd31dbef45 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-07-14mb/hatch: Fix Puff baseboard missing mainboard symbolsEdward O'Callaghan
Fix a missing CONFIG_ prefix in Makefile. BUG=b:161154280 BRANCH=puff TEST=builds Change-Id: I177fcd830a8a03a8db1910bfbfd784a60dc08e11 Spotted-by: Ryan Lin. Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43438 Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14soc/intel/skylake: Move `acpi_fill_fadt` to fadt.cAngel Pons
Intel southbridges do this. Change-Id: I8ecf3c0b0c822185ca66bae1bd65b0cf24512a49 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-07-14soc/intel/braswell: Move `acpi_fill_fadt` to fadt.cAngel Pons
Intel southbridges do this. Also make `acpi_sci_irq` non-static as it is needed outside acpi.c with this change. Change-Id: I2fd2ec5a3029dc1bd1fa65dc3d1af5505f1f1dad Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43377 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-07-14soc/intel/baytrail: Move `acpi_fill_fadt` to fadt.cAngel Pons
Intel southbridges do this. Also make `acpi_sci_irq` non-static as it is needed outside acpi.c with this change. Change-Id: I702988493e3b29d807a75c70485baaa2ff6d1aa2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43376 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-07-14soc/intel/broadwell: Move `acpi_fill_fadt` to fadt.cAngel Pons
Intel southbridges do this. Change-Id: Id120e4a6b42168de58c396439593900a00d7e757 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-07-14sb/intel/lynxpoint: Move `acpi_fill_fadt` to fadt.cAngel Pons
Other Intel southbridges do this. Change-Id: I9b0c8be34e01b617352da4ff8ff37f4b44a4b334 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-07-14sb/intel/bd82x6x: Move `acpi_fill_fadt` to fadt.cAngel Pons
Other Intel southbridges do this. Change-Id: I6ae78696b0fa2d91dd2c6de0a3ef28e08d85e93b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43373 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-07-14sb/intel/ibexpeak: Move `acpi_fill_fadt` to fadt.cAngel Pons
Other Intel southbridges do this. Change-Id: I8306295fb87776aab5ed0e56e1a9c480c65fe3c6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43372 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-07-14soc/amd/common/block/include/amdblocks/acpi.h: Add missing <types.h>Elyes HAOUAS
BIT(x) needs <types.h> Change-Id: I5dc0d45567ae9879a7e12f2ccc48929d2abc9456 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-14arch/x86/postcar_loader: Remove unused 'include <cpu/cpu.h>'Elyes HAOUAS
Change-Id: I5a36f5729a1a5ad5819ebb3c46b775ba52237d65 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42080 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14cpu/intel/model_1067x: Drop <cpu/x86/mp.h> includeElyes HAOUAS
Found using: diff <(git grep -l 'include <cpu/x86/mp.h>' -- src) <(git grep -l 'CACHELINE_SIZE\|cpu_info\|mfence\|mfence\|mp_ops\|mp_init_with_smm\|MP_RUN_ON_ALL_CPUS\|mp_run_on_aps\|mp_run_on_all_cpus\|mp_park_aps\|smm_initiate_relocation_parallel\|smm_initiate_relocation' -- src/) |grep '<' Change-Id: Ib721e667144d6803261f3761a077570e0e27391d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 13:06:06 +0000