summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-14drivers/elog: Remove ELOG_PRERAM configShelley Chen
This change is being done for the following reasons: 1. The CONFIG_ELOG_PRERAM is unused. 2. We need to pull in elog.c into romstage because we are pulling the mrc_cache_stash_data function into romstage. 3. Furquan says that we can rely on the linker to optimize out the unused 4KiB buffer in the early stages of boot, which allows us to get rid of the ELOG_PRERAM config. BUG=b:117884485, b:150502246 BRANCH=None TEST=./util/abuild/abuild -p none -t GOOGLE_NAMI -x -a -v Change-Id: Id76cabc38e41e9bf79e1580a530c871a4ecef4ec Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45303 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14lib/fmap: add ENV_SMM check to setup_preram_cacheJosie Nordrum
Add check in setup_preram_cache to return if ENV_SMM is true. This avoids false warning that post-RAM FMAP is accessed too early caused by ENV_ROMSTAGE_OR_BEFORE evaluation in SMI handler. BUG=b:167321319 BRANCH=None TEST=None Signed-off-by: Josie Nordrum <josienordrum@google.com> Change-Id: I3a4c199c42ee556187d6c4277e8793a36e4d493b Reviewed-on: https://review.coreboot.org/c/coreboot/+/45274 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-09-14soc/intel/common/block: Use pci_dev_request_bus_master for BM enablingSubrata Banik
Enabling Bus Master isn't required by the hardware, so we shouldn't need to enable it at all. However, some payloads do not set this bit before attempting DMA transfers, which results in boot failures. Replace static sata_final() implementation for BM enabling with generic pci_dev_request_bus_master() function. This allows the user to control through Kconfig whether Bus Master should be enabled. TEST=Able to boot to OS from SATA device on CML platform. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: Icd086184fd6fa9c03c806c857f13fad5a9e78a3e Reviewed-on: https://review.coreboot.org/c/coreboot/+/45320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-14soc/intel/{cnl,icl,jsl,tgl}: Clean up chip.hSubrata Banik
Removed unused header files in chip.h Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: Idb9b1ed23df3dbb9dad4d36651064c21a4d913fc Reviewed-on: https://review.coreboot.org/c/coreboot/+/45322 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-14soc/intel/jasperlake: Clean up iomap.h and systemagent.hSubrata Banik
List of changes: 1. Convert inconsistent white space into tab. 2. Group together all MCHBAR offset macros. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: Ief13406b0116ce0f0b7472e5b133b3fac06f6e27 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-14soc/intel/cnl: Add ACPI support for PMC core OS driverMichael Niewöhner
PMC core OS driver (intel_pmc_core.c in linux kernel) provides debug hooks to developers and end users to quickly figure out why their platform is not entering a deeper idle state such as S0ix. Include the common pmc.asl added in commit 957481c. Test: PMC gets detected by Linux kernel module. Change-Id: Ibf7c8ba7449df15c2ca30d23791e17fc878204f2 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45318 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14crossgcc: Fix libcpp to address -Wformat-securityMasanori Ogino
On some systems where the system compiler enables `-Wformat-security -Werror=format-security` options by default, building libcpp fails because the code passes a variable directly as a format string. This change addresses this problem by patching the affected code. Tested with the default compiler of Nixpkgs unstable, GCC 9.3.0 with the options described above enabled by default. Signed-off-by: Masanori Ogino <mogino@acm.org> Change-Id: Ibf3c9e79ce10cd400c9f7ea40dd6de1ab81b50e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45311 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-14util/cbfstool: extend includes in commonlibIdwer Vollering
Certain non-Linux OSes require an include file in different places. Build tested on Linux, FreeBSD. Change-Id: Icd81c2a96c608589ce2ec8f4b883fd4e584776b1 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38648 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14src/include: Drop unneeded empty linesElyes HAOUAS
Change-Id: Ie325541547ea10946f41a8f979d144a06a7e80eb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-09-14soc/amd/picasso: Move sd_emmc_config into emmc_config structRaul E Rangel
I plan on adding another eMMC parameter. This refactor keeps the config contained in a single struct. BUG=b:159823235 TEST=Build test Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I4b57d651ab44d6c1cad661d620bffd4207dfebd4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-09-14mb/google/delbin: Configure DP_HPD as PAD_NC and disable DdiPortHpdRavi Sarawadi
GPP_A19(DP_HPD1) and GPP_A20(DP_HPD2) were configured native function (NF1) without internal pull-down which wrongly presents HPD interrupts. DP_HPD had been removed for EVT design as those events are through eSPI. This change configures GPP_A19 and GPP_A20 to be no connection and disables DdiPort1Hpd and DdiPort2Hpd. BUG=b:162566436 TEST=Booted to kernel and verified no kernel HPD pins assertion message on Delbin board. Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: Ifdef8ee438276678258b75d2fb70c6dfc7ee0a33 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45031 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-09-14mb/google/octopus/variants/fleex: Add G2Touch touchscreen supportJohn Su
BUG=b:167297664 BRANCH=octopus TEST=build fleex, and check touchscreen can work Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I910681c258ff5487830e795a8bd08c66be69b1d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44980 Reviewed-by: Justin TerAvest <teravest@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Henry Sun <henrysun@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14soc/amd/picasso: copy local info to transfer bufKangheui Won
We added transfer_info_struct to contain various information about memory region we pass from PSP to x86 in commit 0c12abe462. This should be at the start of transfer region but we only manipulated it as local variable and didn't put data into the region, resulting garbage data for transfer_info when x86 tries to read it. Copy the content of local variable to beginning of _transfer_buffer before requesting transfer to PSP so coreboot on x86 can access it. BUG=b:159220781 BRANCH=zork TEST=check transfer_info_struct is correctly populated on romstage Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I14bc34e6af501240a6f633db3999a7759e88d60b Reviewed-on: https://review.coreboot.org/c/coreboot/+/44751 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14include/superio/hwm5_conf.h: Fix copy-pasted commentsAngel Pons
Comments say `port`, but the actual function signature uses `base`. Change-Id: I28a2f24a9701aec2fb990ca2f38e5f2794e15f0c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45226 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14mb/google/dedede/var/boten: Add audio configurationKarthikeyan Ramasubramanian
Add configuration for ALC5682 headphone jack and ALC1015 speaker amplifier. Also turn on the HDA PCI device. BUG=b:161667665 TEST=Build the boten board and verified the audio functionality. Change-Id: I835db854543e6282c102c86a7073b432fd89d0a5 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44920 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14sb/intel/lynxpoint/acpi: Do not determine PCH type at runtimeAngel Pons
Both PCH types are very different, and mixing the code for both together isn't useful. Make `ISLP` return a constant, so that IASL can fold it. Change-Id: I6222d6661115d444d4dad0217c2d376dc551465c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45048 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14sb/intel/lynxpoint: Do not determine PCH type at runtimeAngel Pons
Both PCH types are very different, and mixing the code for both together isn't useful. First of all, inline `pch_is_lp` to return a constant. This allows the compiler to optimize out unused code, which results in smaller executables. For the Asrock B85M Pro4, it's about 2.5 KiB less. Subsequent commits will further split the southbridge code. Change-Id: Iba904acf64096478d1b76ffd05a076f0203502f8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45047 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14mb/ocp/deltalake: Drop redundant `select FSP_CAR`Angel Pons
This is selected by Xeon SP Kconfig already. Change-Id: If1ef7f86b27d7be74912c9ad1f9c1efbda6233e5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2020-09-14soc/intel/xeon_sp/cpx: display FSP_PREV_BOOT_ERR_SRC_HOBJonathan Zhang
Before MRC code execution, FSP interrogates EMCA MSR registers and other registers to see if there are fatal errors happened during previous boot session. If there are, error records are saved into FSP_PREV_BOOT_ERR_SRC_HOB. When the value of Length field of FSP_PREV_BOOT_ERR_SRC_HOB is 2, that means the HOB does not contain any valid error record. TESTED=Injects MCE error through cscript, reboot into OS, check boot log: 0x75904d70, 0x00000400 bytes: HOB_TYPE_GUID_EXTENSION 5138b5c5-9369-48ec-5b9738a2f7096675: FSP_PREV_BOOT_ERR_SRC_HOB_GUID ================ PREV_BOOT_ERR_SRC HOB DATA ================ hob: 0x75904d88, Length: 0x42 MCBANK ERR INFO: Segment: 0, Socket: 0, ApicId: 0x0 McBankNum: 0x3 McBankStatus: 0xfe00000000800400 McBankAddr: 0xf0ff McBankMisc: 0xfffffff0 MCBANK ERR INFO: Segment: 0, Socket: 0, ApicId: 0x0 McBankNum: 0x4 McBankStatus: 0xfe00000000800400 McBankAddr: 0xfff0 McBankMisc: 0xfffffff0 0x75904d88: 42 00 01 00 00 00 00 00 03 00 00 04 80 00 00 00 B............... 0x75904d98: 00 fe ff f0 00 00 00 00 00 00 f0 ff ff ff 00 00 ................ 0x75904da8: 00 00 01 00 00 00 00 00 04 00 00 04 80 00 00 00 ................ 0x75904db8: 00 fe f0 ff 00 00 00 00 00 00 f0 ff ff ff 00 00 ................ 0x75904dc8: 00 00 Change-Id: Idbace4c2500440b3c1cf2628dd921ca1a989ae81 Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44974 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14src/vendorcode/intel/fsp/fsp2_0/cpx-sp: add prev boot error info HOB header fileJonathan Zhang
PREV_BOOT_ERR_SRC_HOB is generated by CPX-SP FSP by interrogating error status registered (such as MCA MSRs) to list fatal errors happened during the previous boot session. The header file supports 3 different error source types. CPX-SP FSP supports only McBankType. Change-Id: I9b88af17075b98e88c7e94e55fea37627ec03cd0 Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44973 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14coreinfo: Use SPDX license identifiersJacob Garber
- Remove copyright notices and add authors to AUTHORS - Use SPDX license identifiers for all files - Add coreinfo to the license header lint Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: Ib0c5328a4027849b1eda4f57141a898335230726 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45178 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-14mb/google/volteer: Fix GPP_E12 definitionCaveh Jalali
GPP_E12 should not be defined in the baseboard as its use is determined by the variant. For legacy reasons, we still have GPP_E12 defined in early_gpio but should not. Malefor and volteer* have the same GPP_E12 definition, but that is a misconfiguration. I think that was a copy-paste that slipped through the reviews. BUG=b:157597158 TEST=volteer2 boots to the OS Change-Id: Ic3ef864827aa94b0b96e335565119f3d5d008837 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45197 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-09-14mb/google/volteer/var/voxel: Update DPTF parameters and TCC offsetDavid Wu
1. Set tcc offset to 5 degree celsius 2. Apply the DPTF parameters received from the thermal team. BUG=b:167523658 TEST=build and verify by thermal team Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I01a6fc5bd959798c8dd423df3907c69c883733e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-14mb/google/volteer: Refactor baseboard devicetreeTim Wawrzynczak
Clean up the DPTF section of the baseboard devicetree; this makes overrides simpler, as not necessarily all of the fields need to be overridden. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Iad46fd02f7602c9419d7c3674b0d2b6f5add9a93 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45179 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-14mb/google/dedede/variants/drawcia: Increase PL2 value from 15W to 20WSumeet R Pawnikar
Jasper Lake SoC supports PL2 (Power Limit2) as 20W. Increase PL2 value from 15W to 20W. BRANCH=None BUG=b:166656373 TEST=Built and tested on drawlat system Change-Id: I82d6792907bb1c88cc9dd57d1eaeda8421c12fb2 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45162 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14soc/intel/tigerlake: Increase PRERAM_CBMEM_CONSOLE_SIZE to 8KBAnil Kumar
This patch increases PRERAM_CBMEM_CONSOLE_SIZE from 5KB to 8KB to fix cbmem buffer overflow issue. Bug=None Branch=None Test=Boot TGLRVP and check cbmem -c | grep 'CBFS: Locating' lists all stages Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: I2393cc83008211be8e6a2ca7a1e41a7e9d92caf0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45183 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14mb/google/volteer: Add error handlingJohn Zhao
Coverity detects missing error handling after calling function tlcl_lib_init. This change checks the function tlcl_lib_init return value and handles error properly. Found-by: Coverity CID 1432491 TEST=None Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Ife38b1450451cb25e5479760d640375db153e499 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-14mb/google/volteer: Enable EC software syncDavid Wu
Enable EC software sync for terrador and todor BUG=None TEST=emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I8c463eadd19d99dc04923f7400560cf7ba4b8101 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-09-14soc/intel/tigerlake: Select USE_CAR_NEM_ENHANCED_V2 for tigerlakeShreesh Chhabbi
Selects Cache QoS mask MSR programming flow for Tigerlake SoC. BUG=b:145958015 TEST= Build and boot to Chrome OS on TGL-UP3 RVP. Recipe used: 1. Patch https://review.coreboot.org/c/coreboot/+/43494 that implements calculation of CQOS mask dynamically based on stack size usage & incorporates Tigerlake SoC specific programming flow. 2. QS Engineering Microcode based on 0x56 Official Microcode with LLC CQOS change. 3. QS SoC Part Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Change-Id: I602d93eb4f8243ec49993b00691140d9a6cf5733 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-14soc/intel/common/cpu: Update COS mask calculation for NEM enhanced modeAamir Bohra
Update the COS mask calculation to accomodate the RW data as per SoC configuration. Currently only one way is allocated for RW data and configured for non-eviction. For earlier platform this served fine, and could accomodate a RW data up to 256Kb. Starting TGL and JSL, the DCACHE_RAM_SIZE is configured for 512Kb, which cannot be mapped to a single way. Hence update the number of ways to be configured for non- eviction as per total LLC size. The total LLC size/ number of ways gives the way size. DCACHE_RAM_SIZE/ way size gives the number of ways that need to be configured for non- eviction, instead of harcoding it to 1. TGL uses MSR IA32_CR_SF_QOS_MASK_1(0x1891) and IA32_CR_SF_QOS_MASK_2(0x1892) as COS mask selection register and hence needs to be progarmmed accordingly. Also JSL and TGL platforms the COS mask selection is mapped to bit 32:33 of MSR IA32_PQR_ASSOC(0xC8F) and need to be updated in edx(maps 63:32) before MSR write instead of eax(maps 31:0). This implementation corrects that as well. BUG=b:149273819 TEST= Boot waddledoo(JSL), hatch(CML), Volteer(TGL)with NEM enhanced CAR configuration. Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Change-Id: I54e047161853bfc70516c1d607aa479e68836d04 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-13utils/docker/coreboot-sdk: Update python to python2, add python3Martin Roth
The latest debian image needs the python2 package specified instead of just 'python'. Also add python3 to the builder as we'll probably be getting python3 scripts before too long. Change-Id: Iceea3981b1e219141bf06ad0b559cdbf1c98b360 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45265 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-09-13libpayload: malloc: Fix realloc for overlapping buffersYu-Ping Wu
The current realloc() works by freeing the origin buffer, allocating a new one, and copying the data over. It's true that free() won't touch the actual memory. However, the alloc() following it will potentially modify the memory that belongs to the old buffer in order to create a new free block (right after the newly allocated block). This causes 8 bytes (HDRSIZE) to be overwritten before being copied to the new buffer. To fix the problem, we must create the header of the new free block after the data is copied. In this patch, the content of alloc() is split into two functions: 1. find_free_block(): Find a free block with large enough size, without touching the memory 2. use_block(): Update the header of the newly allocated block, and create the header of the new free block right after it Then, inside realloc(), call memmove() call right after find_free_block() while before use_block(). BUG=b:165439970 TEST=emerge-puff libpayload TEST=Puff boots TEST=Verified realloc() correctly copied data when buffers overlapped Change-Id: I9418320a26820909144890300ddfb09ec2570f43 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45284 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-13soc/amd/picasso/chip: fix typo in acp_pme_enableFelix Held
That devicetree setting is about the Audio Co-Processor and not ACPI. BRANCH=zork Change-Id: I7f376371ee094392d4434340c77f0fc8d0d8e4e1 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-09-13soc/amd/picasso/aoac: make AOAC device number unsignedFelix Held
The AOAC device number is never negative, so make it unsigned. BRANCH=zork Change-Id: I3e0d15a646f02da5767504471961d5d9f8f28bea Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45308 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-13soc/amd/picasso/uart: make AOAC device ID in uart_enable unsignedFelix Held
This change is separate from CB:45308 to only have the directly UART- related changes in this patch train. BRANCH=zork Change-Id: Ie587fdbd1e6229c1374fce3568c6a361577dc6c4 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45310 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-13soc/amd/picasso/uart: add missing types.h includeFelix Held
BRANCH=zork Change-Id: I51923d72a2ad8dceeef11e15fb6765262dd514d9 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-12soc/intel/common/block/*/Kconfig: Guard options with if-blocksAngel Pons
The usual structure of these files is a global enable symbol, usually followed by an if-block which contains all other dependent symbols. Use this instead of having a `depends on` line to each symbol. Guard all symbols, even if they originally were not guarded, since they don't do anything useful unless the global enable option is selected. Change-Id: If5347187b07a46192f0063011ab197b5047f555f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45043 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-12Update vboot submodule to upstream masterIdwer Vollering
Updating from commit id fefcaa65: vboot: adjust VB2_SECDATA_KERNEL_FLAGS in non-recovery path to commit id 4bb06cc1: COIL: Change denylist to blocklist This brings in 20 new commmits. Signed-off-by: Idwer Vollering <vidwer@gmail.com> Change-Id: I0efef2f0ab6ecb89c8132cca2bd4ab7f71e85ced Reviewed-on: https://review.coreboot.org/c/coreboot/+/45299 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-12soc/intel/denverton_ns/uart_debug: include header for uart_platform_baseFelix Held
Include console/uart.h for the declaration of uart_platform_base instead of declaring the function in the source file. Change-Id: Ib72d8884f27e93cec058dbcda404dd6908de1981 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-12include/console/uart: make index parameter unsignedFelix Held
The UART index is never negative, so make it unsigned and drop the checks for the index to be non-negative. Change-Id: I64bd60bd2a3b82552cb3ac6524792b9ac6c09a94 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-12soc/amd/picasso/uart: make index parameters unsignedFelix Held
The UART index is never negative, so make it unsigned and drop the check for the index to be non-negative. BRANCH=zork Change-Id: I38b5dad87f8af4fbe8ee1d919230efe48f68686c Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-12mb/ocp/deltalake: Enable TPM2Christian Walter
Change-Id: I6eaaf80dd2bd69096574ab967ec0c6738b05903b Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45268 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-12cpu/intel/model_1067x: enable PECIMichael Büchler
This is required for Super I/Os to be able to read the CPU temperature through PECI. On 45nm Core 2 CPUs (Wolfdale, Yorkfield) it is not enabled by default. This is probably related to erratum AW67 "Enabling PECI via the PECI_CTL MSR incorrectly writes CPUID_FEATURE_MASK1 MSR". The suggested workaround is "Do not initialize PECI before processor update is loaded". Since coreboot performs microcode updates before running this code it should not cause any trouble. It was tested on a Core 2 Duo E8400, stepping E0. PECI is already enabled by default on older (65nm) CPUs. Tested: Pentium Dual-Core E2160. See commit edac28ce65e48d6b2a0a2421d046a4fe4b2bf589 for the same change on cpu/intel/model_6fx. Signed-off-by: Michael Büchler <michael.buechler@posteo.net> Change-Id: I5a3ec033bd816665af4ecc82f7b167857cd7c1b6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-09-11mb/msi/ms7721: Use PNP_IDX_EN instead of magic numberElyes HAOUAS
Change-Id: Ica66ad6da61376f64f9d24de015f84d250327d66 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-09-11mb/ibase/mb899: Use 'PNP_IDX_*' macros instead of magic numberElyes HAOUAS
Change-Id: I1e543f8ff701fa20eaaee601ef54f0b056e61909 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44832 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-09-11mb/kontron/ktqm77: Use 'PNP_IDX_*' instead of magic numbersElyes HAOUAS
Change-Id: Ic4f51a59524bacb374d90c5620f810e96d7b8eb2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44839 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-09-11strongbad / coachz : Add Initial SupportBob Moragues
BUG=b:162409909 BUG=b:164196066 BRANCH=NONE TEST=Verify build of strongbad target Signed-off-by: Bob Moragues <moragues@chromium.org> Change-Id: If83bd2c8f25fdd3c9625f40121e55c3c922a66fe Reviewed-on: https://review.coreboot.org/c/coreboot/+/45276 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-11mb/kontron/986lcd-m: Use ''PNP_IDX_*' instead of magic numbersElyes HAOUAS
Change-Id: Ic7c1b4defa8c65ed739b1cf3861087cd53cd997c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-09-11mb/biostar/am1ml: Use 'PNP_IDX_*' instead of magic numbersElyes HAOUAS
Change-Id: I5eaf33558e14f63045928215d88d2ad2554fdbf2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44836 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-09-11src/superio: Use 'PNP_IDX_*' macros instead of magic numbersElyes HAOUAS
Change-Id: I2f8d6d9e8b6e84bb6c2b4e73b0fbeca476130d05 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-09-11mb/google/dedede/var/drawcia: Remove debug statement with NULL pointerKarthikeyan Ramasubramanian
The debug statement to print WiFi SAR file can potentially have a NULL pointer. Also the debug statement does not add much value. Hence remove the debug statement. BUG=b:165613510 TEST=Build and boot the drawcia board to OS. Change-Id: I710240f5e965f523fb8ac55a67880e1cbf9abd48 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-11sconfig: Allow to link devices to other device's driversNico Huber
Rarely, the driver of one device needs to know about another device that can be anywhere in the device hierarchy. Current applications boil down to EEPROMs that store information that is consumed by some code (e.g. MAC address). The idea is to give device nodes in the `devicetree.cb` an alias that can later be used to link it to a device driver's `config` structure. The driver has to declare a field of type `struct device *`, e.g. struct some_chip_driver_config { DEVTREE_CONST struct device *needed_eeprom; }; In the devicetree, the referenced device gets an alias, e.g. device i2c 0x50 alias my_eeprom on end The author of the devicetree is free to choose any alias name that is unique in the devicetree. Later, when configuring the driver the alias can be used to link the device with the field of a driver's config: chip some/chip/driver use my_eeprom as needed_eeprom end Override devices can add an alias if it does not exist, but cannot change the alias for a device that already exists. Alias names are checked for conflicts both in the base tree and in the override tree. References are resolved after the tree is parsed so aliases and references do not need to be in a specific order in the tree. Change-Id: I058a319f9b968924fbef9485a96c9e3f900a3ee8 Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35456 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-11src/ec: Drop unneeded empty linesElyes HAOUAS
Change-Id: I1955390fcceeb42ecb644ac74541b7e9dd25320f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-09-11mb/google/dedede/var/drawcia: Add Wifi SAR for drawciaWisley Chen
drawman/drawlat/drawcia share the same coreboot, and only drawcia is convertible. Use tablet mode of fw config to decide to load custom wifi sar or not. BUG=b:165613510 TEST=enable CHROMEOS_WIFI_SAR in config of coreboot, emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage. Change-Id: Ibcd498021e63d0a172c71c3d94b60b3a25973467 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-09-11mb/google/dedede: Enable FW_CONFIGWisley Chen
Enable FW_CONFIG and add tablet mode field in devicetree BUG=b:165613510 TEST=emerge-dedede coreboot Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Change-Id: I55e4c0d0b4aa2337c01773006d0b485fdcd91654 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-09-11mb/google/dedede: Add option to enable WiFi SAR configsWisley Chen
BUG=b:165613510 TEST=emerge-dedede coreboot Change-Id: Ic575889fd9b726a710abff78e1ecc8427b668d5d Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-09-11mb/google/zork: Add woomax memory ID 0Rob Barnes
Woomax needs memory ID 0 to map to MT40A512M16TB-062E:J. BUG=b:165611555 TEST=None Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: Ibbcef6be382bd6649c93cfe92427f124dd137112 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45264 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-11soc/amd/picasso: Fix TSC frequency calculationNikolai Vyssotski
Fix TSC frequency calculation per Picasso PPR. This code was copied from Stoney and was incorrect for Picasso. BUG=b:163423984 TEST=verify Dalboz TSC to be 1GHz BRANCH=zork Change-Id: Ibe3f49c7d295e7336ee042da2b94823171b6eb55 Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-09-11vc/amd/fsp/picasso: Fix FSP-S UPD header file formattingFelix Held
Use one tab instead of 8 spaces at the beginning of the lines added in commit 39a8040ddc551306d823d52a459fdb5dd717b2fe. Change-Id: I8d7553e1b41dbbbdabd7392028a51e3a0f79c97a Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45257 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-09-11soc/amd/common/espi_util: clarify espi_open_io_windowFelix Held
Calling espi_open_generic_io_window in espi_open_io_window depends on the condition in the preceding if statement, so move the command into an else block to make it more obvious that this is the case. TEST=Timeless build results in identical image. Change-Id: I3039817afd79c30a2df2f2f54e7848f52dc2c487 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44353 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-09-11soc/intel/tigerlake: Clean up systemagent.hSubrata Banik
List of changes: 1. Convert inconsistent white space into tab. 2. Group together all MCHBAR offset macros. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I82fc362589389081b1b1856524a972b780af9a13 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45256 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-11device: Fix incompatible-pointer-types build errorSubrata Banik
The build error `incompatible-pointer-types` occurs while using `pci_dev_request_bus_master` as part of device ops Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I3b1ce85b8db1ddf9ac860415edbe64694b91b3d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45122 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-11mb/google/volteer/variants/volteer2: route GPP_F14 via APICAlex Levin
GPP_F14 should be configured to be routed via APIC and not SCI. BUG=b:162528549 TEST=verified on a volteer2 Signed-off-by: Alex Levin <levinale@google.com> Change-Id: I7f2c7af230dd75b3cb3806e2b186725d49da9e68 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45279 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-10trogdor: Strappings_update_final3.1_second_thisistherealone.patchJulius Werner
Apparently what I thought was lazor-rev2 is actually lazor-rev3 and nobody is really sure what lazor-rev4 is going to be at this point or how we proceed from there. What seems to be somewhat agreed upon is that for now all Lazor revisions use the "old" GPIO mapping and it's not very clear if that's ever going to change for Lazor, so let's take the revision restriction out from Lazor for now. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I4939ccfd8464da6e72b5e01a58489b8c80f5b4df Reviewed-on: https://review.coreboot.org/c/coreboot/+/45225 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Philip Chen <philipchen@google.com>
2020-09-10soc/amd/picasso: Move APCB generation out of picassoRob Barnes
Move APCB generation out of the picasso makefile and into the mainboard makefile. APCB generation tends to be mainboard specific and does not belong in the soc makefile. BUG=b:168099242 TEST=Build mandolin and check for APCB in coreboot binary Build and boot ezkinil Change-Id: Ib85ad94e515f2ffad58aafe06c1f1d4043e9303c Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45222 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-10lib/Makefile.inc: fix hex-to-bin conversion of SPD filesMichael Niewöhner
This fixes the hex-to-bin conversion command, used to generated binary SPD files from hexdumps. An issue that only appeared on one of my systems, where conversion of '01 02 03' to binary resulted in \x01\x32\x03 instead of \x01\x02\x03: for c in 01 02 03; do printf $(printf '\%o' 0x$c); done | xxd -g 1 00000000: 01 32 03 .2. The reason for this was that the syntax in lib/Makefile.inc is wrong, because the backslash must be escaped due to chaining two printf commands. Change-Id: I36b0efac81977e95d3cc4f189c3ae418379fe315 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45207 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-10util/abuild: Remove symbols that don't exist anymore in KconfigPatrick Georgi
Bayou and OpenBIOS aren't supported by the coreboot build system anymore, so remove these mentions. Change-Id: Ibdf6fdc776068041cb468fdbf5b56b06f85c2d4b Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-10soc/amd/picasso: Add MADT entry for GNB IOAPICJason Glenesk
Add the missing entry using new Kconfig symbol for IOAPIC ID. coreboot will always enable the GNB IOAPIC. Cq-Depend: chrome-internal:3247431, chrome-internal:3253044 BUG=b:167421913, b:166519072 TEST=Boot fully to morphius board with and without amd_iommu kernel parameter. Dump MADT and IVRS tables. Cross check ioapic entries in MADT against IVRS. BRANCH=Zork Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Change-Id: Ic4a2e9b71dba948e8a4907e5f97131426d8a4a3e Reviewed-on: https://review.coreboot.org/c/coreboot/+/45056 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-10soc/amd/picasso: Assign IOAPIC IDs, GNB APIC base with FSPMarshall Dawson
Add Kconfig symbols for the FCH and GNB IOAPIC IDs, then pass the info to FSP to keep it in sync with coreboot. Do the same for the northbridge's IOAPIC base address. Use the new values where needed, and reserve the resources consumed by the GNB IOAPIC. BUG=b:167421913, b:166519072 TEST=Boot Morphius and verify settings BRANCH=Zork Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I57d3d6b2ebd8b5d511dbcb4324ea065cc3111a2d Reviewed-on: https://review.coreboot.org/c/coreboot/+/45115 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-10vc/amd/fsp/picasso: Sync FSP-S UPD header fileMarshall Dawson
Sync the UPD definitions with the latest auto-generated files. Definitions and usage will be updated in a subsequent FSP Integration Guide. Cq-Depend: chrome-internal:3247431 BUG=b:167421913, b:166519072, b:159664044 TEST=Boot morphius BRANCH=Zork Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: Ic85e1f457c8932d933d8645738de68319dbf375a Reviewed-on: https://review.coreboot.org/c/coreboot/+/45113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-09-10mb/google/asurada: Add config for hayatoYu-Ping Wu
BUG=b:163789704 TEST=emerge-asurada coreboot BRANCH=none Change-Id: I1a5928fb81356aaf040534e1675933a504aa9f95 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45163 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-10soc/mediatek: Drop unneeded empty linesElyes HAOUAS
Change-Id: Ia419de14614a7a1b583e0870e9ca2fcdc8cf815a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-09-10mb/siemens/mc_apl2/gpio: Fix code styleMaxim Polyakov
Use the 96 character limit for pad macros. Change-Id: I03fd2f9309c04628c46e3473bed280edc57e215c Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2020-09-10mb/siemens/mc_apl2/gpio: Undo set DRIVER for GPOMaxim Polyakov
GPIO Driver mode is used for configuration interrupt routing for external devices through GPI. But there is no point in configuring this for GPO. This patch replaces the PAD_CFG_GPO_GPIO_DRIVER macro with others that do not set the corresponding bit in the Host Software Pad Ownership register. Change-Id: I406a08e526a6c655f38e4c0a355957c98e93881c Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2020-09-10vendorcode/intel/fsp/alderlake: Fix FSPS_ARCH_UPD redefinition issueSubrata Banik
FSPS_ARCH_UPD struct is part of edk2-stable202005 branch (FspApi.h) hence local definition of FSPS_ARCH_UPD inside FspsUpd.h is causing compilation issue. Change-Id: Id5b3637d9ab6d87aab6da810f9c83d3258900a29 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-09-10soc/intel/alderlake: Rename pch_init() codeSubrata Banik
Rename the pch_init function to bootblock_pch_init to maintain the parity with previous generation SoC code block. Refer to commit 1201696. Change-Id: Id2a89b2f64b58079062d79e07efbdcfad7ed3d2d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45189 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-10soc/intel/tigerlake: Maintain consistent tab in iomap.hSubrata Banik
This patch converts inconsistent white space into tab. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: If5e191b92e3e53b43335136ef51bc62589b955a0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-09-10sc7180: Add display hardware pipe line initializationVinod Polimera
Add sc7180 display hardware pipeline programming support and invoke the display initialization from soc_init. Changes in V1: - added display init required check. - added edid read function using i2c communication. - added sn65dsi86 bridge driver to init bridge. - moved display initialization to mainboard file. Changes in V2: - moved diplay init sequence to mainboard file - moved edid read function to bridge driver. - calculated timing paramters using edid parameters. - removed command mode config code. - moved bridge driver to drivers/ti. - seperated out bridge and soc code with mainboard file as interface. Changes in V3: - add GPIO selection at runtime based on boardid. - add vbif register struct overlay. Changes in V4: - update gpio config for lazor board. Change-Id: I7d5e3f1781c48759553243abeb3d694f76cd008e Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39615 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-10sc7180: Add support for sn65dsi86 bridgeVinod Polimera
Add sn65dsi86 bridge driver to enable the eDP bridge. Datasheet used : https://www.ti.com/lit/ds/sllseh2b/sllseh2b.pdf Changes in V1: - fix the dp lanes using mask - separate out the refclk and hpd config to init function Change-Id: I36a68f3241f0ba316c261a73c2f6d30fe6c3ccdc Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-10sc7180: Add display dsi interface programmingVinod Polimera
This change adds support for sc7180 dsi interface host programming. Changes in V1: - remove dual dsi config code. - update register access using struct overlays. - remove dsc config & command mode code. Changes in V2: - remove dsi read and write functions. - remove target and panel related code. Changes in V3: - move prototypes to headers. - define macros for constants. Changes in V4: - define register bits instead of hardcoded values. Change-Id: Ie64354ce8bc2a64b891fb9478fbca38d6ec4c321 Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39614 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-10sc7180: enable bl31T Michael Turney
Developer/Reviewer, be aware of this patch from Napali: https://review.coreboot.org/c/coreboot/+/28014/44 Change-Id: Ia961ee0e30478e21fd786ce464655977449df510 Signed-off-by: Ashwin Kumar <ashk@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35504 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-09soc/intel/common/block/imc: Drop unused codeAngel Pons
Nothing uses this code anymore. Change-Id: I5da1020597c126a40b015beb6e43fb0168aa330f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45046 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
2020-09-09sc7180: Add display 10nm phy & pll programming supportVinod Polimera
Adds basic headers as well as source required for display dsi 10nm phy & pll programming. Changes in V1: - add struct overlays to model hardware registers. - remove typedef structures. - remove dead code such as dual dsi,split config etc. Changes in V2: - remove panel related header files. - update the bitclock calculation using edid parameters. - add phy timing calculation function. - update copyright license. Changes in V3: - update the mdss clock structure. - remove dsi_phy_configinfo_type struct. - remove unused struct fields. Changes in V4: - update clock apis. - remove unused structures. Change-Id: I8ff400922ae594f558cf73a5aaa433a3a93347c2 Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-09sc7180: clock: Add display external clock in corebootTaniya Das
Add support for display external clock in coreboot for SC7180. Tested: Display clocks are configured. Change-Id: Ida222890252b80db738fa1f685b212b3f7c6e689 Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-09trogdor: Change Memlayout to increase QcLib region from 512 to 596kBAshwin Kumar
Change-Id: I49008ea9bc6254c745352b2e8ee965ddc2e8e5e4 Signed-off-by: Ashwin Kumar <ashk@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-09sc7180: GPIO: Add I2S configuration for google/trogdorvsujithk
Configure GPIO pins as I2S mode for audio speaker. The audio speaker does not work on Trogdor revision 1, as the layout was changed. Developer/Reviewer reference, be aware of this issue: https://partnerissuetracker.corp.google.com/issues/146533652 Change-Id: Ia4bbfea591a3231640b53e64f0e4e9d43c4437a3 Signed-off-by: vsujithk <vsujithk@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-09trogdor: SoC makefile blob supportashk
Following blobs will includes with SoC makefile: * AOP * BOOT * QTISECLIB * QCSEC * QUPV3FW Change-Id: I85a20ef31ec91c6f22221d16fd4c3097c5cb97d1 Signed-off-by: Ashwin Kumar <ashk@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-09mb/google/volteer/var/trondo: Add memory parts and generate DRAM IDsDavid Wu
Add memory parts and generate DRAM IDs for trondo. BUG=None TEST=FW_NAME=trondo emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I2e89ecaf73a30595ed48ac9ce94ccbd4bb7ed3c2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45164 Reviewed-by: Michael Niewöhner Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-09drivers/ipmi: Add CONFIG_IPMI_KCS_TIMEOUT_MS for IPMI KCS timeout valueJohnny Lin
With the current timeout of 1000 cycles of 100 microsecond would see timeout occurs on OCP Delta Lake if the log level is set to values smaller than 8. Because the prink(BIOS_SPEW, ..) in ipmi_kcs_status() creates delay and avoid the problem, but after setting the log level to 4 we see some timeout occurs. The unit is millisecond and the default value is set to 5000 according to IPMI spec v2.0 rev 1.1 Sec. 9.15, a five-second timeout or greater is recommended. Tested=On OCP Delta Lake, with log level 4 cannot observe timeout occurs. Change-Id: I42ede1d9200bb5d0dbb455d2ff66e2816f10e86b Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45103 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-09mb/google/volteer/variants/eldrid: add memory.c for ddr4 supportnick_xr_chen
Add new memory.c to support DDR4 memory types. Use the new meminit_ddr() and variant_memory_sku() for eldrid variant code on memory.c The initial settings override the baseboard from volteer and fine tune gpio.c and overridetree.cb on eldrid's configuration. BUG=b:161772961 TEST='emerge-volteer coreboot chromeos-bootimage' and verify that Eldrid can boots. NOTE that tests the ddr4 side of the implementation. Change-Id: I2c7b30093a8d85bac5aba5b83768af5eb36c4f70 Signed-off-by: Nick Chen <nick_xr_chen@wistron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44632 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-09-093rdparty: Add submodule intel-sec-toolsPhilipp Deppenwiese
Project: https://github.com/9elements/converged-security-suite License: BSD-3 Tooling for Intel platform security features Change-Id: I7421b30eb38e64cf6b77b7e1c485c5700728997b Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45170 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-09soc/ti/am335x: Fix MLO buildSam Lewis
Allows the AM335X to boot from the coreboot generated MLO by: - Fixing the load address in the MLO header to be the start of SRAM - Fixing the way that the bootblock size is calculated (which is embedded into the MLO so that the MLO knows how much to load into SRAM). The previous method relied on parsing cbfstool output - the output has changed format since this was originally written so this no longer works. Directly using the filesize of the built binary is probably a more stable way of doing this. As part of this, the start addresses of SRAM and DRAM were fixed to be consistent with the AM335x Technical Reference Manual (spruh73, rev Q). TEST: Booted Beaglebone Black from MLO placed at offset 0x00 on an SD card Change-Id: I514d7cda65ddcbf27e78286dc6857c9e81ce6f9e Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44381 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-09mb/ti/beaglebone: Init UART in early initSam Lewis
The console is initialized before mainboard_init, so the peripheral should be initialized in bootblock_mainboard_early_init rather than bootblock_mainboard_init. Change-Id: I9f4ba29798eb0b1efea76f5ade4a234fb35a2f83 Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-09-09soc/intel/common/block/uart/Kconfig: Drop unused symbolsAngel Pons
They are not referenced anywhere. Change-Id: Iff2d3b0063da5796e0bff1ada08b0a544c3f9a5a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-09-09util/mb/google: Update dalboz/trembyle templateRob Barnes
- Fix relative path to spd folder. - Add spd folder with empty files. BUG=None TEST=None Change-Id: Iae88ff9c8255f60544312f0eeadf1ce617437baf Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-09-09util/spd_tools: Support comments in mem_parts_usedRob Barnes
Allow comments prefixed with '#' in mem_parts_used csv file. BUG=None TEST=Run gen_part_id with mem_parts_used file containing comments Change-Id: Ia9e274d45aa06dea7a3a5f8cd1c8ee2b23398876 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-09soc/intel/xeon_sp: Select CPU_INTEL_COMMONAngel Pons
This is an intermediate step to have SOC_INTEL_COMMON_BLOCK_CPU select CPU_INTEL_COMMON directly, to avoid dependency problems. Tested with BUILD_TIMELESS=1: Without including the config file in the coreboot.rom, both OCP Tioga Pass and Delta Lake remain identical. Change-Id: I565e75869be730e7c2fe7114b829941bc9890e6c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45041 Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-09drivers/aspeed/common: Support disabled P2A bridgePatrick Rudolph
This ports Linux commit 71f677a91046599ece96ebab21df956ce909c456 "Handle configuration without P2A bridge". Quote: The ast driver configures a window to enable access into BMC memory space in order to read some configuration registers. If this window is disabled, which it can be from the BMC side, the ast driver can't function. Closing this window is a necessity for security if a machine's host side and BMC side are controlled by different parties; i.e. a cloud provider offering machines "bare metal". P2A stands for primary to AHB. Tested on Prodrive Hermes, which uses an AST2500. The machine still boots, has a high resolution framebuffer working in EDK2, and its boot time has been reduced by 2.5 seconds as it no longer runs into a timeout due to disabled P2A bridge. Change-Id: I3293dc35ae89c010154e02eff904ec3a68c96683 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45137 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-09-09soc/intel/cannonlake: Add PCIe ports on PCH-HPatrick Rudolph
Fixes complains about missing INT configuration by the pciexp kernel modules. Tested with Linux 5.5 on Prodrive Hermes. Change-Id: I277f592cd8d2c86a9c7ba4b34d3f703f7d593582 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-09apollolake: Define MAX_CPUS at SoC scopeAngel Pons
The three Intel Apollo Lake boards (apl_rvp, leafhill and minnow3) do not define MAX_CPUS, which would then default to 1. Since this is most likely an oversight, use the same value as other Apollo Lake boards. To ensure this does not happen again, factor out MAX_CPUS to SoC scope. Change-Id: I5ed98a6b592c8010b59eca7ff773ae1ccc4cd7b1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45144 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>