| Age | Commit message (Collapse) | Author |
|---|
|
baytrail: combine SPI configuration in romstage
Reviewed-on: https://chromium-review.googlesource.com/185140
(cherry picked from commit 4e7f0e8ae1138e478ae7106d54719cf05e13b402)
baytrail: lock down registers before handoff
Reviewed-on: https://chromium-review.googlesource.com/185200
(cherry picked from commit 82cce4d2b46ccc554b71efa179b5d95756e2ad5e)
baytrail: invoke SMM finalization on handoff
Reviewed-on: https://chromium-review.googlesource.com/185201
(cherry picked from commit 1b50affb1fdda52a5986c9429713930ed517a86a)
rambi: don't invoke SMM finalization
Reviewed-on: https://chromium-review.googlesource.com/185202
(cherry picked from commit 6eff475dae7f4536eb846ccf6d51fce262b8ffef)
rambi: remove handling of APM_CNT_FINALIZE
Reviewed-on: https://chromium-review.googlesource.com/185203
(cherry picked from commit 9fc310d7e2730466cc7fcc84999502a2d4d08bab)
baytrail: don't increment boot count on S3 resume
Reviewed-on: https://chromium-review.googlesource.com/185381
(cherry picked from commit 940a0fa4df1ce335229eb6f80143b93a84ba358c)
rambi: enable HDA device
Reviewed-on: https://chromium-review.googlesource.com/184574
(cherry picked from commit 334f2a5c7c6540e744b6aaf7e1da0b55e1368196)
baytrail: lock down spi controller according to mainboard
Reviewed-on: https://chromium-review.googlesource.com/185631
(cherry picked from commit 696ece68cb6d522c248e800f168e675e4b4a7317)
rambi: implement mainboard_get_spi_config() to lock dow spi controller
Reviewed-on: https://chromium-review.googlesource.com/185632
(cherry picked from commit 1d9ba15858fd421a4fe5a47f7171273128e89524)
baytrail: introduce ssus_disable_internal_pull()
Reviewed-on: https://chromium-review.googlesource.com/185740
(cherry picked from commit 9d6056dd70b27183dab6a4656f4f9612ae870a4d)
rambi: fix write-protect gpio reading at romstage
Reviewed-on: https://chromium-review.googlesource.com/185741
(cherry picked from commit c64627689b1afec59be6fdab323d5492046f0bc7)
baytrail: DPTF: implement charger current limit
Reviewed-on: https://chromium-review.googlesource.com/185759
(cherry picked from commit 287e8936613a7a83281ff692b20383dacf7fcaf6)
rambi: Enable charger participant and define states
Reviewed-on: https://chromium-review.googlesource.com/185760
(cherry picked from commit 2f62a11927ecf10cb2c76a9f5d368d4050404137)
baytrail: increase command wait timeout
Reviewed-on: https://chromium-review.googlesource.com/185874
(cherry picked from commit 962a79ef72169b5d52fc746d1889d3b652fd9bcc)
baytrail: make caching MRC data more robust
Reviewed-on: https://chromium-review.googlesource.com/185875
(cherry picked from commit b5e10ad47b9e4f330caaee4faf69702f24d6bdd8)
baytrail: upgrade MRC wrapper header
Reviewed-on: https://chromium-review.googlesource.com/186391
(cherry picked from commit 8c1a62f1f4261d4f38aacbbb353c9d6218ec2885)
rambi: instruct MRC to use weaker memory ODT settings
Reviewed-on: https://chromium-review.googlesource.com/186420
(cherry picked from commit b9329126ca08d20ce1d8c5db0fcabd39140c7292)
rambi: Move touch wakeup resource GPIO to separate device
Reviewed-on: https://chromium-review.googlesource.com/186932
(cherry picked from commit ba44e2e04f9469c629cb61a911c8cd339f52b0ef)
baytrail: Set some MSRs related to turbo power
Reviewed-on: https://chromium-review.googlesource.com/186933
(cherry picked from commit 76b25df5a31914ae58d47d17af448216011e425c)
baytrail: change power consumption number for ACPI_C3/C6FS.
Reviewed-on: https://chromium-review.googlesource.com/186934
(cherry picked from commit 5192e2464fbb88ea6fc117070240c9733e34f065)
baytrail: Fix use of ConcatenateResTemplate() in ACPI LPE device
Reviewed-on: https://chromium-review.googlesource.com/186928
(cherry picked from commit 8d1ab5de1d43b0790d140f6d0e36a990a5049ece)
baytrail: Disable P-state HW coordination on 4-core SKU
Reviewed-on: https://chromium-review.googlesource.com/187575
(cherry picked from commit c19c0f1d7cb3cb2635766c186ba9598933424a78)
baytrail: DPTF: Enable mainboard-specific _PDL
Reviewed-on: https://chromium-review.googlesource.com/187576
(cherry picked from commit 5412ac5c07bee22017a0ee6d1e2433917b98ea87)
rambi: Apply DPTF tuning parameters
Reviewed-on: https://chromium-review.googlesource.com/187577
(cherry picked from commit 932a5a3803ceaf430ad2934b371ac0886c25efca)
rambi : change lpe_codec_clk_freq to 19.2
Reviewed-on: https://chromium-review.googlesource.com/187594
(cherry picked from commit f64cb1ae77076ad5ec994670f4a83dc561ea80c4)
Squashed 25 commits for baytrail/rambi.
Change-Id: Ibe628ac974d117a09361f7f3131a488911ddd27d
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6933
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Update the ec_commands header (direct from EC source) and
add support for the new charger current limit interface
which will be used by DPTF.
Change-Id: Ia9a2a84b612a2982dbe996f07a856be6cd53ebdb
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/185758
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 1fcca2d75856ecefd3aeb1c551182aa76d649466)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6925
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Showed up as an error when '--gc-sections' was added as a flag to the
compiler.
Change-Id: I214d3e16a72fca0becc677d7af66097464d64247
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6926
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Default to do native VGA init since this machine is a laptop
and the user would likely want to use it as such. Also, if you
know what this is you know how to turn it off if you want to.
Change-Id: I55f91a48affbd0ec93b0bb0c88c531d15c32ba21
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6903
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
- Enable xhci_default setting in devicetree
- Enable usb_xhci_on_resume setting for PEI
Change-Id: I2a3965a222ce571a2ad43f568fc2d0ecb94a77bc
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180673
(cherry picked from commit c5ef875f6d148964b8ad62a3fe79916c758dbc57)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6908
Tested-by: build bot (Jenkins)
|
|
We have no good reason to be handling the TCO timeout
as an SMI since we aren't doing anything special with it
and clearing the status in the handler prevents the reboot
from actually happening.
Change-Id: I074ac0cfa7230606690e3f0e4c40ebc2a8713635
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180672
(cherry picked from commit 608a2c5768e9300c81b7c72fb8ab7a0c7c142bec)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6907
Tested-by: build bot (Jenkins)
|
|
rambi: Change RAM_ID GPIOs to GPIO_INPUT
Reviewed-on: https://chromium-review.googlesource.com/182934
(cherry picked from commit 8afd981a091a3711ff3b55520fe73f57f7258cc0)
baytrail: initialize rtc device
Reviewed-on: https://chromium-review.googlesource.com/183051
(cherry picked from commit 1b80d71e4942310bd7e83c5565c6a06c30811821)
baytrail: Set SOC power budget values for SdpProfile 2&3
Reviewed-on: https://chromium-review.googlesource.com/183101
(cherry picked from commit 87d49323cac4492c23f910bd7d43b83b3c8a9b55)
baytrail: Set PMC PTPS register correctly
Reviewed-on: https://chromium-review.googlesource.com/183280
(cherry picked from commit 1b520b577f2bf1b124db301f57421665b637f9ad)
baytrail: update to version 809 microcode for c0
Reviewed-on: https://chromium-review.googlesource.com/183256
(cherry picked from commit 8ed0ef4c3bed1196256c691be5b80563b81baa5e)
baytrail: Add a shared GNVS init function
Reviewed-on: https://chromium-review.googlesource.com/183332
(cherry picked from commit 969dffda1d3d0adaee58d604b6eeea13a41a408c)
baytrail: Add basic support for ACPI System Wake Source
Reviewed-on: https://chromium-review.googlesource.com/183333
(cherry picked from commit a6b85ad950fb3a51d12cb91c869420b72b433619)
baytrail: allow configuration of io hole size
Reviewed-on: https://chromium-review.googlesource.com/183269
(cherry picked from commit 95a79aff57ec7bf4bcbf0207a017c9dab10c1919)
baytrail: add in C0 stepping idenitification support.
Reviewed-on: https://chromium-review.googlesource.com/183594
(cherry picked from commit 8ad02684b25f2870cdea334fbd081f0ef4467cd4)
baytrail: add option for enabling PS2 mode
Reviewed-on: https://chromium-review.googlesource.com/183595
(cherry picked from commit c92db75de5edc2ff745c1d40155e8b654ad3d49f)
rambi: enable PS2 mode for VNN and VCC
Reviewed-on: https://chromium-review.googlesource.com/183596
(cherry picked from commit 821ce0e72c93adb60404a4dc4ff8c0f6285cbdf9)
baytrail: add config option for disabling slp_x stretching
Reviewed-on: https://chromium-review.googlesource.com/183587
(cherry picked from commit f99804c2649bef436644dd300be2a595659ceece)
rambi: disable slp_x stretching after sus fail
Reviewed-on: https://chromium-review.googlesource.com/183588
(cherry picked from commit 753fadb6b9e90fc8d1c5092d50b20a2826d8d880)
baytrail: ACPI_ENABLE_WAKE_SUS_GPIO macro for ACPI
Reviewed-on: https://chromium-review.googlesource.com/183597
(cherry picked from commit 78775098a87f46b3bb66ade124753a195a5fa906)
rambi: fix trackpad and touchscreen wake sources
Reviewed-on: https://chromium-review.googlesource.com/183598
(cherry picked from commit 3022c82b020f4cafeb5be7978eef6045d1408cd5)
baytrail: Add support for LPE device in ACPI mode
Reviewed-on: https://chromium-review.googlesource.com/184006
(cherry picked from commit 398387ed75a63ce5a6033239ac24b5e1d77c8c9f)
rambi: Add LPE GPIOs for Jack/Mic detect
Reviewed-on: https://chromium-review.googlesource.com/184007
(cherry picked from commit edde584bb23bae1e703481e0f33a1f036373a578)
rambi: Set TSRx passive threshold to 60C
Reviewed-on: https://chromium-review.googlesource.com/184008
(cherry picked from commit 1d6aeb85fd1af64d5f7c564c6709a1cf6daad5ee)
baytrail: DPTF: Add PPCC object for power limit information
Reviewed-on: https://chromium-review.googlesource.com/184158
(cherry picked from commit e9c002c393d8b4904f9d57c5c8e7cf1dfce5049b)
baytrail: DPTF: Add _CRT/_PSV objects for the CPU participant
Reviewed-on: https://chromium-review.googlesource.com/184442
(cherry picked from commit e04c20962aede1aa9e6899bd3072daa82e8613bd)
rambi: Move the CPU passive/critical threshold config to DPTF
Reviewed-on: https://chromium-review.googlesource.com/184443
(cherry picked from commit dda468793143a6d288981b6d7e1cd5ef4514c2ac)
baytrail: Fix XHCI controller reset on resume
Reviewed-on: https://chromium-review.googlesource.com/184500
(cherry picked from commit 0457b5dce1860709fcce1407e42ae83023b463cd)
baytrail: update lpe audio firmware location
Reviewed-on: https://chromium-review.googlesource.com/184481
(cherry picked from commit 0472e6bd45cb069fbe4939c6de499e03c3707ba6)
rambi: Put LPSS devices in ACPI mode
Reviewed-on: https://chromium-review.googlesource.com/184530
(cherry picked from commit 52bec109860b95e2d6260d5433f33d0923a05ce1)
baytrail: initialize HDA device and HDMI codec
Reviewed-on: https://chromium-review.googlesource.com/184710
(cherry picked from commit 393198705034aa9c6935615dda6eba8b6bd5c961)
baytrail: provide GPIO_ACPI_WAKE configuration
Reviewed-on: https://chromium-review.googlesource.com/184718
(cherry picked from commit 44558c3346f5b96cf7b3dcb25a23b4e99855497b)
rambi: configure wake pins as just wake sources
Reviewed-on: https://chromium-review.googlesource.com/184719
(cherry picked from commit ee4620a90a131dce49f96b2da7f0a3bb70b13115)
baytrail: I2C: Add config data to ACPI Device
Reviewed-on: https://chromium-review.googlesource.com/184922
(cherry picked from commit ffb73af007e77faf497fbc3321c8163d18c24ec8)
Squashed 28 commits for rambi and baytrail.
Change-Id: If6060681bb5dc9432a54e6f3c6af9d8080debad8
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6916
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
There's no reason to keep maintaining support on this mainboard, since nobody has one.
Change-Id: I5c7c8ea4640170ba231fec82a94a54ee1876b845
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/180503
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit e291d82acbc8bf0d1372e11ac100a7dd340a0040)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6913
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Add a Kconfig variable so that driver code knows whether
or not to use dual-output reads.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I31d23bfedd91521d719378ec573e33b381ebd2c5
Reviewed-on: https://chromium-review.googlesource.com/177834
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit de6869a3350041c6823427787971efc9fcf469b8)
tegra124: implement x2 mode for SPI transfers on CBFS media
This implements x2 mode when reading CBFS media over SPI.
In theory this effectively doubles our throughput, though the initial
results were almost negligibly better. Using a logic analyzer we see
a pattern of 12 clocks, ~70ns delay, 4 clocks, ~310ns delay. So if we
want to see further gains here then we'll probably need to tune AHB
arbitration and utilization to eliminate bubbles/stalls when copying
from APB DMA.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I33d6ae30923fc42b4dc7103d029085985472cf3e
Reviewed-on: https://chromium-review.googlesource.com/177835
Reviewed-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 29289223362b12e84da5cbb130f285c6b9d314cc)
nyan: turn on dual-output reads for SPI flash
Nyan's SPI chip is capable of dual-output reads, so let's use it.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I51a97c05aa25442d8ddcc4e3e35a2507d91a64df
Reviewed-on: https://chromium-review.googlesource.com/177836
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 62de0889a9cfc5686800645d05e21e272e4beb5c)
Squashed three commits to enable dual output spi reads for nyan.
Also fixed the spi_xfer interface that has been updated to use bytes
instead of bits.
Change-Id: I750a177576175b297f61e1b10eac6db15e75aa6e
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6909
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Change-Id: I602f970e0ee2fd634a74fd4c25358c2e78ca58f9
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/179536
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
(cherry picked from commit 02b0583e632f1ba53557f8cfe4293ad4ed29ff4d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6910
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This functionality is already available for ARM, so lets add it to x86 as
well. We'll want to be able to hook exceptions when running as a remote GDB
target.
Change-Id: I42f640b08eb9eb86a1bcab3c327f7780191a2eb5
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/179601
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 5b8cf0c9f70a7e14766a2b095e6739a8d6321a34)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6898
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This function returns the number of microseconds scaled from the number of raw
timer ticks. It accepts a base parameter which is subtracted from the current
time, which makes it easy to keep track of relative times.
Change-Id: I55f2f9e90c0e12cda430bbe88b044f12b0b563c8
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/179600
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 4dd549e18d170dbf918c5b4b11bbe1f4e99b6695)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6897
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The aarch64 is not really an arm variant, it's sufficiently
different that it can be considered (for purposes of cbfs, certainly)
to be a new architecture.
Add a constant in cbfs.h and strings to correspond to it.
Note that with the new cbfstool support that we added earlier,
the actual use of aarch64 ELF files actually "just works" (at
least when tested earlier).
Change-Id: Ib4900900d99c9aae6eef858d8ee097709368c4d4
Reviewed-on: https://chromium-review.googlesource.com/180221
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit f836e14695827b2667804bc1058e08ec7b297921)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6896
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Patch 12b121f3fef61d introduced an off-by-one error in the offsets of the
PMU register struct, which put both the newly added register and the
PSHOLD that comes after it in the wrong place. This patch corrects the
offsets (5420 had already been correct).
Change-Id: I1d9d31a6a73ee91890824e94fbd247d5feb4f6ae
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179411
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 5fdc74bc18bcb1066a0ce3ba94829af1b175173b)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6892
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The xmalloc wrapper checks whether the malloc succeeded, and if not stops
execution and prints a message. xmalloc always returns a valid pointer. The
xzalloc wrapper does the same thing, but also zeroes the memory before
returning it.
Old-Change-Id: I00e7de04a5c368ab3603530b98bd3e3596e10632
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/178001
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 4029796d4f66601e33ae3038dbfc3299f56baf89)
libpayload: malloc: Fix xmalloc() for zero byte allocations
The C standard considers it legal to return a NULL pointer for zero
length memory allocations, and our malloc implementation does in fact
make use of that. xmalloc() and xzmalloc() should therefore not consider
this case a failure.
Also fixed a minor formatting issue.
Old-Change-Id: Ib9b75df9458ce2ba75fd0bc0af9814a3323298eb
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178725
Reviewed-by: Mike Frysinger <vapier@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 3033437e9d89c6072464860ea50ea27dcb76fe54)
Squashed 2 libpayload malloc related commits.
Change-Id: I682ef5f4aad58c93ae2be40e2edc1fd29e5d0438
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6890
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
This is essentially a revert of commit 10bd772d. The CAR_MIGRATE
mechanism is only useful to migrate variables from a special region
(e.g. cache as RAM) into DRAM-backed CBMEM between different parts of
the romstage (it does not persist into ramstage). Since ARM devices use
SRAM for which there is no reason to become inaccessible in later parts
of the romstage, this mechanism isn't useful for them. Removing it makes
the romstage.ld script much simpler, which has the nice side-effect of
putting the BSS at the end of the memory image (so that cbfstool can
actually figure out that it doesn't need to be part of the ROM image).
Old-Change-Id: I50e91d8bd51b5deb19446d9da48699edecbef6ea
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176761
Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit ebfd698e57c902e2f39a0cfc1bc2b02665e47ec6)
console: Make cbmem depend on x86.
The cbmem implementation isn't supported on anything other than x86 right now
and actually causes memory corruption on ARM machines. Until that's fixed, this
will prevent people from turning it on and causing hard to track down errors.
Old-Change-Id: I00e8aacf008acfe2f76d4eab82570f7c1cc89cab
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/191107
Reviewed-by: Julius Werner <jwerner@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit e54f16e346a7f2c66d802fb78a6b24e53b732b83)
Squashed two related commits for cbmem support on arm.
Change-Id: I2be48cea348ee5dc8ca3632d743500aa111bab08
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6888
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
If a programming error is detected, die can be used to print a message and
stop execution similar to failing an assert. There's also a "die_if" function
which is conditional.
die functions, like asserts, should be used to trap programming errors and not
when the hardware does something wrong. If all code was written perfectly, no
die function would ever be called. In other words, it would be appropriate to
use die if a function was called with a value that was out of bounds or if
malloc failed. It wouldn't be appropriate if an external device doesn't
respond.
In the future, the die family of functions might print a stack trace or show
other debugging info.
Old-Change-Id: I653fc8cb0b4e459522f1b86f7fac280836d57916
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/178000
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 59df109d56a0f5346562de9b3124666a4443adf0)
libpayload: Fix the license in some files which were accidentally made GPL.
Some files were accidentally made GPL when they were added to libpayload. This
change changes them over to a BSD license to be in line with the intended
license of libpayload.
Old-Change-Id: Ia95ac4951b173dcb93cb489705680e7313df3c92
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/182202
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 5f47600e50e82de226f2fa6ea81d4a3d1c56277b)
Squashed the initial patch for "die" functions and a later update to
the license header.
Change-Id: I3a62cd820e676f4458e61808733d81edd3d76e87
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6889
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Change-Id: Ie4b58b739ea411035b1801348e3e73e607299846
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6900
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
board_status shows that truncation of few KiB is pretty common.
So bump this value.
Change-Id: I78a16974846a59ee4eae782380e6d01d2fa324f2
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6902
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
X230 has 12 MiB flash. SPI controller supports up to 2 x 16 MiB of flash
but address map limits this to 16MiB.
Change-Id: Icc39c3c8d45d2d14e437bdfce920f8b4b039789d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5133
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I6e63abd9491a76e362347b7616e00104305827ee
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6691
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: Idc8135911549ac39c28932065897ca6643c13656
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6690
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I80b7facfb9cc9f642dd1c766884dc23da1aab2c8
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6800
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This patch adds stub implementations of exception_init() to all archs
so that it can be called from src/lib/hardwaremain.c. It also moves/adds
all other invocations of exception_init() (which needs to be rerun in
every stage) close to console_init(), in the hopes that it will be less
likely overlooked when creating future boards. Also added (an
ineffective) one to the armv4 bootblock implementations for consistency
and in case we want to implement it later.
Change-Id: Iecad10172d25f6c1fc54b0fec8165d7ef60e3414
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176764
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 2960623f4a59d841a13793ee906db8d1b1c16c5d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6884
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
"Hey guys, I have this awesome idea! How about we put a huge array
filled with 0xa5 into the data segment of our uncompressed romstage
for no particular reason? Give our SPI driver something to do so it
doesn't get too bored, you know?"
Guess it pays off to just hexdump our image and sanity-check it top to
bottom every once in a while...
Also reduces the size because 8K is crazy just to print a bunch of
registers (256 bytes ought to be enough for anybody).
Old-Change-Id: Icec0a711a1b5140d2ebcd98338ec638a4b6262fa
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176762
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 61c360a1c3f445535c9ff383a389e643cfe4527c)
arm: Remove exception_test()
The exception_test() mechanism might have been useful when exceptions
were first implemented, but now that they are pretty stable it's really
not necessary anymore (especially not on every single boot in production
Chromebooks). It forces a simple unaligned access, and as we start
having exceptions in stages that might not have paging turned on yet,
it's better to remove that completely.
Also removed the duplicated implementations of SCTLR-stuff and switched
to the existing ones in cache.h.
Old-Change-Id: I85e66269f5e2f2dfd3e8aaaa18441493514b62f8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/177101
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit d0706b848572fbea26e0e432ec5827503b9603c9)
Squashed 2 exception related commits.
Change-Id: Id2c115ee39a0732c375472afc0194436e2f5e069
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6885
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
tegra124: Set Tx FIFO threshold value to recommended setting
Reviewed-on: https://chromium-review.googlesource.com/175200
(cherry picked from commit c8f086711c6ae2db70fc8e0d84b54f5952fbe0ad)
tegra124: add CLK_X definitions
Reviewed-on: https://chromium-review.googlesource.com/175220
(cherry picked from commit 3f8a844bd2f151e06d82d1a7fac4492c6bc9417d)
tegra124: fix incorrect struct member in clk_rst.h
Reviewed-on: https://chromium-review.googlesource.com/175270
(cherry picked from commit 967193d5984a086c297988caa580b61cb4d0414c)
tegra124: add the _x clocks to clock_enable_clear_reset
Reviewed-on: https://chromium-review.googlesource.com/175539
(cherry picked from commit df4c515d73b02061e5c98f51efd50e04b10d63f5)
tegra124: add clock support code for graphics.
Reviewed-on: https://chromium-review.googlesource.com/175162
(cherry picked from commit b8eb6ab4cdc5a583636c10fa05f947a244f94819)
tegra124: Clean up some #defines for DMA
Reviewed-on: https://chromium-review.googlesource.com/175631
(cherry picked from commit 1a0a900f2d060916c9878781b82113b16a7945d9)
tegra124: enable flow control for APBDMA in SPI driver
Reviewed-on: https://chromium-review.googlesource.com/175630
(cherry picked from commit 873e6f9e95f6cb0162fa06216682fbc71ab0202d)
nyan: move clock setup for the display out of dca_init
Reviewed-on: https://chromium-review.googlesource.com/175656
(cherry picked from commit 32dd9947a60298ff9488c911629802c257ed6afc)
tegra124: more display PLL setup and clock hardcode removal.
Reviewed-on: https://chromium-review.googlesource.com/175732
(cherry picked from commit 80402876b5daa9e9389fd4fab5f539d89c37fa7f)
tegra124: move dp.c from tegra to tegra124
Reviewed-on: https://chromium-review.googlesource.com/175830
(cherry picked from commit e98be569b0ba7f4d565ce677343a317db08344e0)
tegra124: clean up tabbing; nyan: add a comment and setting to devicetree.cb
Reviewed-on: https://chromium-review.googlesource.com/175889
(cherry picked from commit 4e513196b0014c5a82079f3aa87c2efbeb645484)
tegra: get rid of struct members that are not used
Reviewed-on: https://chromium-review.googlesource.com/176023
(cherry picked from commit 032b8a0c9fe0152ebc27344e93128865ecb918a6)
tegra124: Increase SCLK (AVP) to 300MHz
Reviewed-on: https://chromium-review.googlesource.com/175489
(cherry picked from commit 7e082f2c2f030950d652f1f87f637e15dee38552)
tegra124: Address old main CPU starting review feedback.
Reviewed-on: https://chromium-review.googlesource.com/175933
(cherry picked from commit 1d76ac71bd839dff9198e65132ec25212dd55ffd)
tegra124: Revise clock source configuration for irregular peripherals.
Reviewed-on: https://chromium-review.googlesource.com/176109
(cherry picked from commit 1021c215190602a2b8c1ab97d6c8313d89597d99)
nyan: add timestamps in romstage
Reviewed-on: https://chromium-review.googlesource.com/176172
(cherry picked from commit cd626aa10b56cd4da6ebda36fe487e44b08f3935)
tegra124: Allow enabling clock output for external peripherals.
Reviewed-on: https://chromium-review.googlesource.com/176108
(cherry picked from commit ea9fb6393ee80da77c9fbc30f605859c7009c9ed)
nyan: Enable and configure clocks for I2S and audio codec.
Reviewed-on: https://chromium-review.googlesource.com/176104
(cherry picked from commit 1fb659b3e73285ff8218c0f229734edd3b979ca4)
tegra124: Fix typo in pinmux name.
Reviewed-on: https://chromium-review.googlesource.com/176215
(cherry picked from commit c7915ad41a3f1d1452aa6d6d287aaa8eb9e85c34)
nyan: Add pinmux settings for audio peripherals.
Reviewed-on: https://chromium-review.googlesource.com/176212
(cherry picked from commit 37412f3201590e47a06d4678fa833164d370b41c)
nyan: De-array-ify the PMIC setup code.
Reviewed-on: https://chromium-review.googlesource.com/176903
(cherry picked from commit 86ab1ce9fbf6d5362af1ee37de1394412366f247)
nyan: Add a kconfig for building for the original nyans in pixel cases.
Reviewed-on: https://chromium-review.googlesource.com/176904
(cherry picked from commit 1d05fd5bc40d727826510ec81496ce4a49e257ed)
nyan: Set the CPU voltage differently depending on which PMIC is in use.
Reviewed-on: https://chromium-review.googlesource.com/176905
(cherry picked from commit 31507f6a575220737ee5683b312cd162600f89cc)
nyan: Increase the CPU voltage to 1.2V.
Reviewed-on: https://chromium-review.googlesource.com/176906
(cherry picked from commit fe4795e66b515c2523df09a8800ecac9a3f63557)
tegra124: Flesh out/tidy up the flow controller constants.
Reviewed-on: https://chromium-review.googlesource.com/177085
(cherry picked from commit b50d315506a5ab9c81b6bbaf8cf580dbb3e78794)
tegra124: When leaving the bootblock/AVP, really stop the AVP.
Reviewed-on: https://chromium-review.googlesource.com/177086
(cherry picked from commit 06c10df889d4d935bc99792df860d93766ae44dd)
nyan: Set SPI4 speed to 33MHz
Reviewed-on: https://chromium-review.googlesource.com/177038
(cherry picked from commit c98de65482fabdb5c76944fe3bf762191b3a0a55)
nyan: Do console_init() in romstage
Reviewed-on: https://chromium-review.googlesource.com/176763
(cherry picked from commit 0bec32e09eab28bc5ea49b7896a8b6f489143b03)
nyan: Add a prompt to the CONFIG_NYAN_IN_A_PIXEL option.
Reviewed-on: https://chromium-review.googlesource.com/177486
(cherry picked from commit 7cbb801d000dac4b39f76266ebef2585fe48faba)
nyan: Separate the SDRAM BCT config for the two nyans, and turn down norrin.
Reviewed-on: https://chromium-review.googlesource.com/177487
(cherry picked from commit 6b119685f6626d79d924af9f856ebb90af45a73f)
tegra124: Bump up HCLK and PCLK
Reviewed-on: https://chromium-review.googlesource.com/177563
(cherry picked from commit c25337dac8c3ecdd8ffe5b4d11acebb216132405)
nyan: Add some code for reading the board ID.
Reviewed-on: https://chromium-review.googlesource.com/177488
(cherry picked from commit 5fccbce99e7db312e2e3caf806c438c9b04c0a8f)
nyan: Use the board ID to decide how to initialize the PMIC.
Reviewed-on: https://chromium-review.googlesource.com/177489
(cherry picked from commit 677bdb9df55248da3a0c6be0089098f6d6807d3c)
nyan: Create kconfig variables for each SDRAM config.
Reviewed-on: https://chromium-review.googlesource.com/177580
(cherry picked from commit d7ddcf262a321f06289c4f2b2a6b43982dd96377)
tegra124: Mux some unused pins away from UARTA, and pull up the serial RX line.
Reviewed-on: https://chromium-review.googlesource.com/177637
(cherry picked from commit bd533cc109b0acf3495b04fa6622e250ba454fe9)
tegra124: Initialize the MCR when setting up the UART.
Reviewed-on: https://chromium-review.googlesource.com/177638
(cherry picked from commit 38c84786fc3e8fab913aebca176ac7b038cb0be6)
tegra124: fix SPI AHB burst length
Reviewed-on: https://chromium-review.googlesource.com/177564
(cherry picked from commit f29235263202c9b4a3dbb65da5727c8eefe44315)
tegra124: remove unneeded debug print in SPI code
Reviewed-on: https://chromium-review.googlesource.com/177833
(cherry picked from commit 34a50040268dbde1c326d315f8042a3905ddfb06)
nyan: Set up the SOC and TPM reset pin.
Reviewed-on: https://chromium-review.googlesource.com/177965
(cherry picked from commit b81a5bd15a2979ee009b9f7bc4a39a304e6a759a)
tegra124: Allow some time for packets to appear in Rx FIFO
Reviewed-on: https://chromium-review.googlesource.com/177832
(cherry picked from commit 8f70a25b1eea865a448525749ac18393f5b9ad84)
nyan: PMIC: Slam default init values for SDOs/LDOs in AS3722
Reviewed-on: https://chromium-review.googlesource.com/178226
(cherry picked from commit c536b0d82fd6fffbc0e2448e0d19d3f06df5d86a)
nyan: change devicetree for the new display settings.
Reviewed-on: https://chromium-review.googlesource.com/177958
(cherry picked from commit 43abed730f222c8a685c250a58c981268994a65d)
nyan: Switch USB VBUS GPIOs from outputs to pulled-up inputs
Reviewed-on: https://chromium-review.googlesource.com/178914
(cherry picked from commit e47b6a609b9d23694a466b56960d9d14ca5d6242)
Tegra124: nyan: Disable VPR
Reviewed-on: https://chromium-review.googlesource.com/179327
(cherry picked from commit 441aa276446141f1b92ed8fb98c9578597487f4d)
tegra124: norrin: fix display issue
Reviewed-on: https://chromium-review.googlesource.com/179745
(cherry picked from commit c1c1ae69f6058ed901f532e2c532d1e6ba1f81fb)
tegra124: Add iRAM layout information.
Reviewed-on: https://chromium-review.googlesource.com/179814
(cherry picked from commit d00f135c93a52ad4dced2edecb74e2dfc54bb2fa)
tegra124: Run bootblock and ROM stage out of DRAM.
Reviewed-on: https://chromium-review.googlesource.com/179822
(cherry picked from commit 2d3ec06ec39a489d02e798bb22bce4d7465b20ce)
nyan: clean up a comment regarding video
Reviewed-on: https://chromium-review.googlesource.com/180161
(cherry picked from commit 03b5e88a66b9c96df2ef3d9ce5ba4a62a8bb2447)
tegra124: norrin: the first step to clean up display code
Reviewed-on: https://chromium-review.googlesource.com/180135
(cherry picked from commit 9d0c12dfef28a1161604df9b3fcc113049b2747d)
Squashed 49 commits for tegra124/nyan.
Change-Id: Id67bfee725e703d3e2d8ac17f40844dc193e901d
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6883
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Ib3e09644c0ee71aacb067adaa85653d151b52078
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6840
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I80f1e27268d0be58514d110611fd3c18cbe81829
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6895
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I804aff0fa53609e5fc70301053f075aa54b9bde5
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6893
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Add the option to coreboot to set the SeaBIOS buffers below 0xC0000.
This is a requirement on the Intel Rangeley processor
because it is designed so that only the processor can write
the higher memory areas. This prevents USB and SATA from bus-mastering
into the buffers when they're set in the typical 0xE0000 area.
This will be set to Y unless defaulted to N by the mainboard or
chipset.
Push the SeaBIOS buffers down to 0x90000 segment for Mohon Peak
Change-Id: I15638605d1c66a2277d4b852796db89978551a34
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/6364
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This patch removes the -ffixed-r8 CFLAG from the coreboot and libpayload
Makefiles. This seems to be a relic from U-Boot, which uses that
register to keep it's global data structure pointer. There's no reason
for us to throw away a perfectly fine register on this already pretty
constrained architecture.
Also removed a config.h inclusion from the Makefile because that should
really be done inside the C files.
Change-Id: Ia176c0f323c1be07cddf88fa5488788786a27cdf
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/177110
Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 2a81112abde284ba09020db6afa363169911a7f6)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6880
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
In the process of rewriting cbfstool for ARM and using
a new internal API a regression was introduced that would
silently let you add an ARM payload into an x86 CBFS image
and the other way around. This patch fixes cbfstool to
produce an error in that case again.
Change-Id: I37ee65a467d9658d0846c2cf43b582e285f1a8f8
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/176711
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 8f74f3f5227e440ae46b59f8fd692f679f3ada2d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6879
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Print a space after a full stop.
Change-Id: Ic7d0522ae35079b64ce61956d06ea59843ef9d80
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/176756
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit c7ff63038b6888b17a96783b1169c5f335022b24)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6878
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Change-Id: I09a8fe94b33c3cc1da62f7a5a527944638bd6f0c
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6877
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Upon S3 resume, the machine powers off due to the ME not being awake yet.
Change-Id: I0255dd0fa6b4cb3b539e11a69a618c770c44f4b0
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6876
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Tegra124: SDMMC: Configure base clock frequency.
Reviewed-on: https://chromium-review.googlesource.com/173841
(cherry picked from commit d3157e9a380cfb018cc69a1f23f277c3c5b680a6)
Tegra124: SDMMC: Configure pinmux for MMC 3/4.
Reviewed-on: https://chromium-review.googlesource.com/174011
(cherry picked from commit 55af9a86a56d6bc0ce9bcff4fd5226a60ae2033b)
tegra124: Move DMA-related #defines and definitions to header
Reviewed-on: https://chromium-review.googlesource.com/174444
(cherry picked from commit 9d917927a5b7151958289469b9049ac91efa41e3)
tegra124: Assign console address for kernel.
Reviewed-on: https://chromium-review.googlesource.com/174486
(cherry picked from commit 36e9370f30bd173879958d164156997841ec4e9c)
nyan: Fix up the gpio indices in chromeos.c.
Reviewed-on: https://chromium-review.googlesource.com/174418
(cherry picked from commit fba4ae1080c19f11abe1205b871ada14db996c61)
Nyan: turn on the backlight.
Reviewed-on: https://chromium-review.googlesource.com/174533
(cherry picked from commit 12649c9611981dd8d6567ba0238c8b8247c52215)
tegra124: Fix the disp1 source field.
Reviewed-on: https://chromium-review.googlesource.com/174701
(cherry picked from commit eed380e09075e1eef0bde7d1bb15c4343f30bfe0)
nyan: set up the aux channel i2c interface
Reviewed-on: https://chromium-review.googlesource.com/174620
(cherry picked from commit ea81cb44a1c11cd78643c69ac818304cd393749e)
tegra124: fix typos in the clock code.
Reviewed-on: https://chromium-review.googlesource.com/174684
(cherry picked from commit 72365c33693db4eb6e01032938221f592b7e5a02)
tegra124: Revamp clock source/divisor configuration
Reviewed-on: https://chromium-review.googlesource.com/174804
(cherry picked from commit 3f31a634f69595bcc6a473301d1492c97a767809)
tegra: Add gpio_output_open_drain() function
Reviewed-on: https://chromium-review.googlesource.com/174650
(cherry picked from commit bc1c28926810e722e9b82339ea0585d083e3fa8c)
tegra124: add nvidia-generated files
Reviewed-on: https://chromium-review.googlesource.com/174610
(cherry picked from commit 7706f3200f7fc11b7a443f336bff6a37afa94652)
nyan: Ignore the dev mode GPIO.
Reviewed-on: https://chromium-review.googlesource.com/174837
(cherry picked from commit 9513e608f3063fdb3e9d8bd04e6e5fe35a5bfcee)
Tegra124: Add support for the ARM architectural timer.
Reviewed-on: https://chromium-review.googlesource.com/174835
(cherry picked from commit 25a91fcf7e79cc450caa59bc6b65f954bb96ac6c)
nyan: Initialize the ARM architectural timer in the RAM stage.
Reviewed-on: https://chromium-review.googlesource.com/174836
(cherry picked from commit 581f592c12de91c0cf8279ede2850e38dd0cd2e8)
tegra124: nyan: Move mainboard level clock stuff into the mainboard source.
Reviewed-on: https://chromium-review.googlesource.com/174843
(cherry picked from commit 5ab100b0bad22814261f9b755b59394562c9145a)
tegra124: add some explanatory text about U7.1 computations.
Reviewed-on: https://chromium-review.googlesource.com/173910
(cherry picked from commit 822cad0ceeceeb5160c8216e05eec13fd04a6413)
Set the EC SPI clock source to PLLP and divide down to around 5MHz
Reviewed-on: https://chromium-review.googlesource.com/173954
(cherry picked from commit c0e22d76d3887ca1f727443a47db38dec12c0b74)
nyan: Move non-essential configuration out of bootblock and into ram stage.
Reviewed-on: https://chromium-review.googlesource.com/174844
(cherry picked from commit dad7f68c76f7b83edacd8b22c9dbd3f0ff027397)
tegra124: clocks: Save some IOs in clock_enable_clear_reset.
Reviewed-on: https://chromium-review.googlesource.com/174845
(cherry picked from commit 81b977a2758d42471667e2cbe31f160dfda5bca4)
tegra124: re-write SPI driver w/ full duplex support
Reviewed-on: https://chromium-review.googlesource.com/174446
(cherry picked from commit 51c9a34240d6a068780a7d1c27b032b56b2d3e54)
tegra124: move SPI-related structures from .c to .h
Reviewed-on: https://chromium-review.googlesource.com/174637
(cherry picked from commit 36760a4463c2c33f494ca7ea5a36810fa4502058)
tegra124: add frame header info to SPI channel struct
Reviewed-on: https://chromium-review.googlesource.com/174638
(cherry picked from commit e24773eb946e2c4cb5e828f055d45d92bd1a4f9f)
tegra124: re-factor tegra_spi_init()
Reviewed-on: https://chromium-review.googlesource.com/174639
(cherry picked from commit 88354b996459a702c36604f5f92c24e63df8de7e)
nyan: Set CrOS EC frame header parameters for SPI
Reviewed-on: https://chromium-review.googlesource.com/174710
(cherry picked from commit 29173ba5863eebb2864a8384435cde2f0d5ca233)
tegra124: Add Rx frame header support to SPI code
Reviewed-on: https://chromium-review.googlesource.com/174711
(cherry picked from commit 1d1630e770804649ef74d31db194d3bde9968832)
tegra124: add support for the Serial Output Resource (sor)
Reviewed-on: https://chromium-review.googlesource.com/174612
(cherry picked from commit 3eebd10afea4498380582e04560af89126911ed9)
nyan: tegra124: Enable I, D and L2 caches in romstage.
Reviewed-on: https://chromium-review.googlesource.com/173777
(cherry picked from commit 74512b7ecfbd50f01a25677307084699ee8c6007)
tegra and tegra124: Bring up graphics
Reviewed-on: https://chromium-review.googlesource.com/174613
(cherry picked from commit 7e944208a176cdac44a31e2a9961c8bd5dc4ece8)
nyan: Move the DMA memory region.
Reviewed-on: https://chromium-review.googlesource.com/174953
(cherry picked from commit c66e22859252eaebceb07a3118ac61f4cf6289eb)
tegra124: Increase CBFS cache buffer size
Reviewed-on: https://chromium-review.googlesource.com/174950
(cherry picked from commit 6dbb4e5f0d66c68df45ac73e3f223b856b715026)
tegra124: Add USB PLL, PHY and EHCI setup code
Reviewed-on: https://chromium-review.googlesource.com/174651
(cherry picked from commit ecd5c398ff6748a7d40089019471357b58d3a6ea)
tegra124: add in some undocument clock source and PLL registers
Reviewed-on: https://chromium-review.googlesource.com/174948
(cherry picked from commit 73fcc4981da6e4415b514eaafb42bc265ab0cd9a)
tegra124: small cleanups of the code
Reviewed-on: https://chromium-review.googlesource.com/174995
(cherry picked from commit 7256aba07e9567ef8d73f05e1f80c4d45fd57bda)
Squashed 34 commits for tegra124 / nyan support.
Change-Id: I050c7ad962e0d24550b0b33c9318e89c80d01f00
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6870
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The google mainboards were updated to unconditionally include
chromeos.c except for panther.
Change-Id: I35bbd56326ee0f94ee542bae28f9c23980e9a9ed
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6874
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Currently there is no way to enable or disable VMX during runtime using
CMOS/NVRAM. It is only possible to configure it during build time by
setting the Kconfig option `CONFIG_ENABLE_VMX`. So update the comment
accordingly.
Change-Id: I4e3294cb39a40cf30d294fd566bc97420592262f
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/6228
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: Ie3a843a76ebf9f5d825e14c4359fb3ecaa052e38
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6809
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
As introduced in:
1783a3c ivybridge: LVDS gfx init.
The panel on the T530 is a AUO B156HW01 V.4, 40 pin LVDS (2 ch, 6-bit).
Tx parameters derived from datasheet table.
Change-Id: I2e3b56a2a3d1ede08a704b839cc11fe6d685cf5b
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6395
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
We now have Native raminit for both sandy/ivybridge introduced in:
7686a56 sandy/ivybridge: Native raminit.
Let us make good use of this support over using the Intel MRC blob to
initialise memory.
USB RCBA configuration data taken between base of 0x3500 up to 0x3600
from `inteltool -r`.
Remark: Note the current port is poorly tested at the moment and I am the
sole maintainer, however one less blob invites more interest for better
support. More to come hopefully.
Change-Id: I41d0ef8303dfd369c5565b823e68a6bee09c44f5
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6394
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
Change-Id: Iaccaf5246e7ac5da2b51dd915c3f3ef807fc6467
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6875
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <gaumless@gmail.com>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Fixes "Discharge rate invalid message" and fwts error.
Change-Id: I51f9d819f164552567d75f83c95ba7523e97343e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6793
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I45885905f0adaa8f0ad9137d7034e6f7a0dc43de
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/175356
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 7fe642543a8de249e13c3d63c3302a20910c247d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6859
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
nyan: Clock setup.
Reviewed-on: https://chromium-review.googlesource.com/172106
(cherry picked from commit 3697b6454c0aceebcf735436de90ba2441c9b7b1)
tegra124: Call into the mainboard bootblock init if one exists.
Reviewed-on: https://chromium-review.googlesource.com/172581
(cherry picked from commit 3a0cd48a0d1a9ce6b32ed614cd81fb81f5f82aec)
nyan: Add a mainboard specific bootblock.
Reviewed-on: https://chromium-review.googlesource.com/172582
(cherry picked from commit a83d065d660a26fe71ed79879c25f84a1b669f69)
nyan: tegra124: Redestribute the clock code between the mainboard and soc.
Reviewed-on: https://chromium-review.googlesource.com/172583
(cherry picked from commit ea703137fc37befa7d5a65afc982e298a0daca1b)
nyan: Initialize the i2c pins and controllers.
Reviewed-on: https://chromium-review.googlesource.com/172584
(cherry picked from commit 9c10a3074ef834688fea46c03551c2e3e54e44a8)
nyan: Initialize the PMIC.
Reviewed-on: https://chromium-review.googlesource.com/172585
(cherry picked from commit f6be8b0e607e05b73b5e4a84afcf04c879eee88a)
tegra124: add a chip.h and use it in NYAN
Reviewed-on: https://chromium-review.googlesource.com/172773
(cherry picked from commit 4dd5f1f091f2dcae5ce38203bb86c62994609f8f)
tegra: Reorder GPIO register accesses to avoid glitching
Reviewed-on: https://chromium-review.googlesource.com/172730
(cherry picked from commit 61bedbf0f839e19b284d21af2ad10f2ff15e17d5)
tegra: Turn GPIO wrappers into macros to make them easier to write
Reviewed-on: https://chromium-review.googlesource.com/172731
(cherry picked from commit 94550fdfa5a8005d2e6a313041de212ab7ac470c)
tegra: Change GPIO functions to allow variable arguments
Reviewed-on: https://chromium-review.googlesource.com/172916
(cherry picked from commit e95ccd984f718a04b6067ff6ad5049a2cd74466d)
tegra124: Implement starting up the main CPUs.
Reviewed-on: https://chromium-review.googlesource.com/172917
(cherry picked from commit 7c5169a197310e18a3df0f176c499669e3c2bda3)
tegra: Simplify the I2C constants.
Reviewed-on: https://chromium-review.googlesource.com/172953
(cherry picked from commit 130a07c86dfa5ba5ac4580f29db927c91f045c76)
tegra124: Fix SPI base addresses
Reviewed-on: https://chromium-review.googlesource.com/173322
(cherry picked from commit da808e46919ebd3b9f2377a5889f0d5f10b92357)
tegra124: Scrub the clock constants.
Reviewed-on: https://chromium-review.googlesource.com/172954
(cherry picked from commit 9305ff0696a6d556a97f928b8683770833a309a4)
tegra124: add DMA support
Reviewed-on: https://chromium-review.googlesource.com/172951
(cherry picked from commit 4d2a5a56b922ac37d2326d7b139697567aac37b8)
tegra124: add basic SPI driver
Reviewed-on: https://chromium-review.googlesource.com/172952
(cherry picked from commit 5f861f13c7fd2dd881f3cbd0f1b4d4a9994ce429)
tegra124: Add an assembly stub which is run first on the main CPUs.
Reviewed-on: https://chromium-review.googlesource.com/173541
(cherry picked from commit e142b9572a89f43fe984c4fc87e3203f380ff4de)
nyan: tegra124: Set up dynamic cbmem.
Reviewed-on: https://chromium-review.googlesource.com/173542
(cherry picked from commit b6e1a70103446abb5c3440f145617e6566879c6f)
tegra124: Add an soc.c which sets up the chip operations and memory resource.
Reviewed-on: https://chromium-review.googlesource.com/173543
(cherry picked from commit af49a5bd1f589cf053c4808510138aae26e20db4)
tegra124: extend chip.h to include video settings
Reviewed-on: https://chromium-review.googlesource.com/173600
(cherry picked from commit 87687633a2116f58fad7333b3b639cee9089ad29)
tegra124 and nyan: fill in the devicetree a bit more, add defines
Reviewed-on: https://chromium-review.googlesource.com/173684
(cherry picked from commit c107eaca3dea42be89f61690d0d6cb2181acb147)
tegra124: clean-ups for SPI driver
Reviewed-on: https://chromium-review.googlesource.com/173599
(cherry picked from commit 1e2f9fd442ea336bf0663c3c8ea51f771e21beb7)
tegra124: add a #define for DMA alignment size
Reviewed-on: https://chromium-review.googlesource.com/173638
(cherry picked from commit f9dc2a8d8016fa7db974fb6cb01c3275e26832af)
tegra124: Add FIFO transmit functions to SPI driver
Reviewed-on: https://chromium-review.googlesource.com/173639
(cherry picked from commit 97e61f36ad96ce2f9b12a7ef765ee73d3f4285f7)
tegra124: clean-ups for DMA driver
Reviewed-on: https://chromium-review.googlesource.com/173598
(cherry picked from commit 750c0a5d6942748dd21f3a3f884ad94a561e86e0)
tegra124: early display and display code.
Reviewed-on: https://chromium-review.googlesource.com/173622
(cherry picked from commit 651c7ab96b1f136865e4673a120de7afc1218558)
tegra124: Move transfer size handling to spi_xfer()
Reviewed-on: https://chromium-review.googlesource.com/173680
(cherry picked from commit 4a9b7b47b3c09d70063ea843054ffef98f554621)
tegra124: strict error detection and reporting for SPI
Reviewed-on: https://chromium-review.googlesource.com/173681
(cherry picked from commit c056fa954e1dab40a56faec6c50385763a2eb010)
tegra124: add thread-friendly delays to SPI driver
Reviewed-on: https://chromium-review.googlesource.com/173648
(cherry picked from commit c1a321c8f61942801627f895c5db74c518e2aa8e)
Tegra124: Take the SPI1 controller out of reset and enable its clock.
Reviewed-on: https://chromium-review.googlesource.com/173787
(cherry picked from commit c026a3fb861e157f1e17a121fc2ef70b903f36f2)
tegra124: add two more clock setting values
Reviewed-on: https://chromium-review.googlesource.com/173772
(cherry picked from commit 7d79d7dd9f0c1fd7127a7ba41652d809ccff7a57)
nyan: Set up the ChromeOS related GPIOs and SPI bus 1 which goes to the EC.
Reviewed-on: https://chromium-review.googlesource.com/173788
(cherry picked from commit ff172bfe30f75983a1e8efa2ead0a4519583d0a8)
tegra124: Add some stub functions to the Tegra SPI driver.
Reviewed-on: https://chromium-review.googlesource.com/173789
(cherry picked from commit 8bc527aa4afd301c046b0e844c7fa400630af0d2)
tegra124: Build source files into the various stges needed by CONFIG_CHROMEOS.
Reviewed-on: https://chromium-review.googlesource.com/173790
(cherry picked from commit 86a6423b668ca912295c47d8c6e3ef6c6f8c6084)
nyan: Implement the code which reads GPIOs for ChromeOS.
Reviewed-on: https://chromium-review.googlesource.com/173791
(cherry picked from commit 4c394dfbce762574fc79edcb6e4ac6bf346e48a3)
nyan: Enable the CHROMEOS and ChromeOS EC related kconfig options.
Reviewed-on: https://chromium-review.googlesource.com/173792
(cherry picked from commit 2845a4487159aa4b1dba58d977f52c449574fc8e)
Tegra124: SDMMC: Take the SDMMC 3 and 4 out of reset and ungate their clocks.
Reviewed-on: https://chromium-review.googlesource.com/173793
(cherry picked from commit c238b87bcd9d35afd828476d6ee88322ac5d0f88)
tegra124: fix clear_fifo_status() in SPI driver
Reviewed-on: https://chromium-review.googlesource.com/173738
(cherry picked from commit f415d2c0aaffc0f1a3592551a2db782d538f8f4f)
ARM: Include stdint.h in cpu.h.
Reviewed-on: https://chromium-review.googlesource.com/173774
(cherry picked from commit f1930faea3f14b2a2560a6c4058ef38532b6f1a6)
tegra124: When setting up the main CPU, set its CPSR appropriately.
Reviewed-on: https://chromium-review.googlesource.com/173775
(cherry picked from commit bc2ba9c15cfd22aeaca4f80b1d13a8b5e0178ead)
tegra124: fix wrong names in clk_rst.h
Reviewed-on: https://chromium-review.googlesource.com/173955
(cherry picked from commit 19dd9c85e4a3d1f77b23828bcbdd4bd8c2688b8d)
tegra124: Fix up the PLLX divider table.
Reviewed-on: https://chromium-review.googlesource.com/173778
(cherry picked from commit 3362cf3a7d6f5eaec879dda42323345922f6df17)
tegra124: clock: Get rid of cpcon and dccon.
Reviewed-on: https://chromium-review.googlesource.com/173779
(cherry picked from commit 08626ffac4a7e9ea3d4738af87e9e4cced7be2c7)
Tegra124: SPI: Set and unset CS in spi_claim_bus and spi_release_bus.
Reviewed-on: https://chromium-review.googlesource.com/173953
(cherry picked from commit a2df8f3a9c9c54c62d6ff37d3baff1d30ee6d355)
armv7: expose dcache_line_bytes() in cache API
Reviewed-on: https://chromium-review.googlesource.com/173975
(cherry picked from commit 6727f65702c7668fcb33848b4113bc3d3cc04e12)
libpayload: expose dcache_line_bytes() in ARM cache API
Reviewed-on: https://chromium-review.googlesource.com/174099
(cherry picked from commit 9387b02dff85b42944d95c3bccf59059c93fb4a9)
armv4: add a stub for dcache_line_bytes()
Reviewed-on: https://chromium-review.googlesource.com/173976
(cherry picked from commit 924f61ea895b9268c716791466637009bbac6469)
tegra124: Base early UART on CLK_M to enable debugging of PLL init code
Reviewed-on: https://chromium-review.googlesource.com/174339
(cherry picked from commit 8d9387432f0a0d9b257b040304238e543cced1aa)
tegra124: Add additional PLLs and redesign the divisor table
Reviewed-on: https://chromium-review.googlesource.com/174380
(cherry picked from commit f6a5f5c4562f1ca733505717c175be00413f2384)
Squashed 49 commits for tegra124/nyan that included a lot of churn on
different pieces.
Change-Id: I00e8f5b74e835e01b28ca2e9c4af3709c9363d56
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6869
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Change-Id: I3d664ab575bf9c49a7bff9a395fbab96748430d0
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6802
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
|
|
This fixes the ACPI interrupt storm on Parrot that happens when
closing the lid or entering suspend by lid close (seen in
/sys/firmware/acpi/interrupts/gpe1F). This patch inverts the interrupt
trigger level every time the interrupt is received so that it doesn't fire
until the next state change. http://askubuntu.com/questions/310196
is a good example of what this is trying to solve.
Change-Id: I8b095914e9330c3217a4ceb058613fa952f4a234
Signed-off-by: Andrew Litt <ajlitt@splunge.net>
Reviewed-on: http://review.coreboot.org/6858
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Unlike in old style CBMEM, dynamic CBMEM does not have a
hand-calculated, hard-coded size, so allow up to 144K of
space for ACPI tables.
Change-Id: Id9dd7447c46d5fe7ed581be753d70e59add05320
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/6795
Tested-by: build bot (Jenkins)
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
During Vladimir's ACPI cleanups, this was moved into the mainboard's
enable stage, which will prevent the VGA option rom from executing
correctly. Move it to the finalize stage to make sure it runs after
all initialize functions have been called.
Change-Id: I0fcca4d4a95f89382f377ce923f82ecb71467fd8
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/6845
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The bootblock and romstage UART consoles were being built in based only on
whether or not the bootblock and romstage consoles were selected, ignoring
whether serial console support was compiled in generally.
Change-Id: I3866519c422a990c44ced66885108eff24894563
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/172580
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit a4f2dd4902a05884693e6e350b6be29276d16981)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6862
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The pins for the UART had been configured manually using hardcoded offsets and
values. Now that we have pinmux functions for that sort of thing, we should
use that instead. This also provides a very simple test for the pinmux code.
Ultimately this code should be wrapped in a function which handles setting up
any of the UARTs which is appropriately parameterized and which would be
called from the bootblock main instead of being in it, but for now this is
sufficient.
Old-Change-Id: I69e36fa5fc9b6f3f5ef7f1be3e9f18cdbfdd7fe9
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171807
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit d29e655b68143e86199ab1d74f89e125b16b67cc)
tegra124: Call the set_avp_clock_to_clkm function in the bootblock.
We had a hardcoded version of the set_avp_clock_to_clkm function in the
bootblock, and we had to use it until now because the real version uses
udelay, and until now that hadn't been implemented. Also, replace the delay
loop in the hacky_hardcoded_uart_setup_function with a call to the real thing.
Old-Change-Id: I6df9421bcad484e0855c67649683d474d78e4883
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/172045
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 4c6dd4c7cade7d922a258e0371e43972bce77249)
Squashed two tegra124 bootblock related commits.
Change-Id: I0ce6321a04b11b7f1250ef3816fe46732777988d
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6861
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
The TPM driver expects to call i2c_read with zero address length. The i2c
driver wasn't prepared to handle that particularly in the case of reads
because it expected to send an address before switching over to read mode for
the data. This change also fixes up the read and write calls to consistently
be read32 and write32 instead of readl and writel.
Change-Id: I33dee89b83d4cd9d3e1b90e84b40e761bb8d4de4
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/175966
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit cf686269424ea938d6f953d0f76103182eb71297)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6857
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The 8GB variant is x16 with 11 column bits and 4Gb density.
Change-Id: I3aa647aba88dbc928fefd826cbd01e4fa8273660
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176640
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit d18462f6fc0d40328e9619525240778ea6b1a426)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6856
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Drop a lot of u-boot-isms and share common TIS API
between I2C driver and LPC driver.
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Change-Id: I43be8eea0acbdaef58ef256a2bc5336b83368a0e
Reviewed-on: https://chromium-review.googlesource.com/175670
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 3fc8515b9dcef66998658e1aa5c020d22509810c)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6855
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Forgot an asterisk and everything goes to hell. Sorry about that.
Change-Id: I6b2503ca3ea0f80d4e4e5d8b8c0e986fec5db2c9
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/173587
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: David James <davidjames@chromium.org>
(cherry picked from commit 2a357560a697b56cc6022a4dd3dda47b33568d83)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6854
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The dump_td() debug function in the EHCI stack incorrectly masks the
amount of transferred bytes on output... the actual field is 15 bits
wide (30:16). Let's just use the mask constant we already have for all
the other code.
Change-Id: I28c6f0ec75cc613e38d53b670645d19bf9ffe1b9
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174986
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 570077da7f16bbe2204b4a80790e4bd8fe1a2bd7)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6853
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Move NFC_INT to GPIO9
Swap CODEC_INT to GPIO46 and WLAN_DISABLE_L to GPIO42
Swap ACCEL_INT to GPIO45 and PP1800_CODEC_EN to GPIO43
Enable PP1800_CODEC_EN, CODEC_LDOENA, CODEC_RESET_L
Old-Change-Id: I5547d34f1b7953808375aa5fe5e0a9640ae7e05e
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175291
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 5bb4bc59e37ee4fe9a0556e08a53402c822e5bd6)
samus: Misc fixes from proto1b bringup
- NFC interrupt is expected in the kernel as a GPIO now,
so set it back to that type
- NFC FW update GPIO should be low
- Accel/Codec interrupts were still set as GPIO type,
they should be set as PIRQ type
Old-Change-Id: I354c848ae7b158943f4745872b82a49e17e67e2f
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176513
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 75a0944f320c80618f12732a23344ce40010a688)
Squashed two small patches for samus.
Change-Id: I7ec56191fe2b7f19e470df175ad0bbe320a442f5
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6852
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Old-Change-Id: Icdde4cf5e1abb3ae1ad14279ebc129919ba30074
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/170837
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit e9d87534ccacb42d508f1902786470798a2dbaea)
nyan: Add a "special-class" for aggregating BCT files into bct.cfg.
The config file which cbootimage processes to create a BCT could come from
multiple different files, individually selected based on config options,
and/or split up into different files for organizational purposes. This change
adds a special-class which collects those files and concatenates them all
together in a bct.cfg which can be processed more easily by other parts of the
build.
While the BCT files themselves are potentially very board specific, for
instance ones that hold memory timing information, this bit of code which
collects them is not. It has to be in each board file instead of alongside the
CPU, however, to ensure that the special class is set up before another
Makefile tries to use it. If we end up with lots of Tegra based boards which
duplicate this code over and over, we might want to revisit how this works.
Old-Change-Id: I58e1373434f89e69298990ea4643a19d8afdc309
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/170922
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 3ae44178b7084037a75e16ce161b1432abf4246a)
nyan: Add bct files for nyan.
There's a config option which selects between the emmc and spi config files
depending on what the firmware is intended to boot from. These are copied from
the files installed by the tegra-bct-nyan ebuild, except that the spi config
file has been modified so that there's only one copy of the BCT and so that it
only has one configuration. This is to save space in the final image.
Old-Change-Id: Ibf1b895bb3ed060d394fc6ffcec67b6972bb21e3
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/170923
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 6bbcffe04e8ae73c86bc05c577a67f909857e1c0)
Squashed three commits required to get nyan building since some patches
were out of order. Added a select to the nyan mainboard Kconfig to have
a rom size of 1024K to match the saved config on the chromium side.
Change-Id: I346dbb02d216adfea9707e40adf0a4d1e0fabf36
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6669
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Add rules for building the nvidia-cbootimage utility and add dependencies
to the tegra124 platform.
Change-Id: Ia9f26981bccd217fe79e1b5dd432ee7da868d22a
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6851
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
ExpressCard is connected to PCIe port 4.
Change-Id: I0cffabd9d9435d24a7e9c178c2f96fb1a9390320
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6850
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Replace codec config copied form T530 with dumped values from T520
/sys/class/sound/card0/hdaudioC0D0/init_pin_configs.
Intel Azalia HDMI is always enabled, but DP isn't connected to a
connector.
Change-Id: Iabdae4a6669ff429d5769a1bb0c0fb1abc12ba82
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6849
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I67f321583211efd9ed917276cc3989c6dc4ac649
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6848
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
This just updates a comment which refers to "board_init_f". We use
bootblock main() in coreboot.
Change-Id: I4cb6b3c11f163b67fe48de495d13dce88710efc0
Reviewed-on: https://chromium-review.googlesource.com/172095
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 65139f29682cedca8dfb58b3dfe67eab64299064)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6791
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Install the BL1 and set up the checksum in the Makefile instead of relying on
post processing. Import the exynos checksum script, split it in two and
simplify it significantly. Stop putting the CBFS header in the midst of the
bootblock so that it can be checksummed before CBFS is put together. Stop
saving space for it and leaving an anchor in the bootblock which nobody looks
for.
Change-Id: Icbb5a5914ece60b2827433b6dc29d80db996ea6c
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/179229
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit aa3a416705517c0a6ddfdeb19905ac8cafb33df1)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6834
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
All this version does is define asmlinkage to be nothing. It's required by the
threading header file which is brought in by the timer implementation which I
think is the hook for thread switching.
Change-Id: Id57261d7c2c5ff8be00b0ad71bf7aaa9f3e24c1d
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171801
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit e00379f54802066fd3e0685b291cdec289078055)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6831
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The bootblock for the tegra124 runs on the AVP coprocessor which uses the
ARMv4 architecture. Switch it over to that architecture.
Change-Id: Ie527bbff938e6148c58727d448f9c2e6862da872
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171402
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit c1aa76b7607ee40ff848628971a97eea5393aebe)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6784
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: build bot (Jenkins)
|
|
This is needed for the tegra124's bootblock and includes enough implementation
to support that use. No caching is supported, although there are function
prototypes and stub implementations to satisfy includes and linking.
Change-Id: Ib79dde8c30eda98b3e823cba2ff6115a610bb2e8
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171401
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 221dc76b3ce4c1d73851c432333e091e1c60f0cb)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6783
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I7cf47a16928436734df29af951f987db9cf9530d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6847
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
As a first step towards removing hardcodes from the FUI support,
change the haswell call to i915_lightup to panel_lightup, and pass the
intel_dp * as a parameter. Get rid of the scalar arguments and make
them part of intel_dp. Get rid of file-scope variables and use the
ones in the intel_dp struct. In falco, use functions that peppy
uses. Drop slippy support for FUI, it's a dead board; if this is ok
I'll remove the files next.
And, incidentally, fix the broken RGBX constant and change it to BGRX.
Change-Id: I46ef5a9ed8433382d042066ee3542af04cfc319a
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/174932
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit 1e1ed410b445c8e2b7411e163d9d6f61499dc3f6)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6833
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
It's time to start cleaning up the falco graphics code, but it needs
to have its own files, not slippy's.
Change-Id: I7dbe27eafbf247b5c7806819bf0059d8b10e842c
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/172501
Tested-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 262a0c16a39871d14972a92bff2dbc24de2ca3f0)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6832
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Nothing is connected to this port.
Change-Id: If3e466a3053fa694a511c2335c16381f77f56f47
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174089
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 5ddb6a444d5c3141868eaf618ecb014b0262a796)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6827
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I73a8e56559c7ffdaab39a5c19311221c91565004
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6830
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
- GPIO29 is no longer connected so we don't need the SMI workaround
on the entry to sleep states.
- Disable touchscreen wake source until the kernel driver is working
so it does not wake immediately.
- Update a few GPIOs and disable the codec for now as it is leaking
into the 1.8V DDR rail.
Change-Id: Ia67b17eb4a097627befd8f39aadc939da1bf3d40
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174122
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 0fdc9a83a434378499f825d072ce0adba5ffda59)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6829
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The LPDDR3 memory is x32 and dual rank with 14 row bits.
In addition the memory is actually elpida, even though
they are owned by micron it is confusing to label it as such.
And the ram strap options were inverted from what I expected
so the memory table needs to be updated.
Change-Id: Ia29a23e8140d884fb84f940806f041b40562aab9
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174121
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 0d63d36b8035165f95db798ed40488519e622a65)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6828
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Ib7b6688982e9f74cffe40d11d4a9ec69acd55d37
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174088
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 41624b073fb59b1372ee5a8eba3ed64c7e633311)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6826
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: Ia835f16b156949f1841210c4a469223d5df28a54
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174087
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 8e51d1d74cdcadde9cbf10e8321d601b099c46bc)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6825
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There are ARM systems which are essentially heterogeneous multicores where
some cores implement a different ARM architecture version than other cores. A
specific example is the tegra124 which boots on an ARMv4 coprocessor while
most code, including most of the firmware, runs on the main ARMv7 core. To
support SOCs like this, the plan is to generalize the ARM architecture so that
all versions are available, and an SOC/CPU can then select what architecture
variant should be used for each component of the firmware; bootblock,
romstage, and ramstage.
Old-Change-Id: I22e048c3bc72bd56371e14200942e436c1e312c2
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171338
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 8423a41529da0ff67fb9873be1e2beb30b09ae2d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
ARM: Split out ARMv7 code and make it possible to have other arch versions.
We don't always want to use ARMv7 code when building for ARM, so we should
separate out the ARMv7 code so it can be excluded, and also make it possible
to include code for some other version of the architecture instead, all per
build component for cases where we need more than one architecture version
at a time.
The tegra124 bootblock will ultimately need to be ARMv4, but until we have
some ARMv4 code to switch over to we can leave it set to ARMv7.
Old-Change-Id: Ia982c91057fac9c252397b7c866224f103761cc7
Reviewed-on: https://chromium-review.googlesource.com/171400
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 799514e6060aa97acdcf081b5c48f965be134483)
Squashed two related patches for splitting ARM support into general
ARM support and ARMv7 specific pieces.
Change-Id: Ic6511507953a2223c87c55f90252c4a4e1dd6010
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6782
Tested-by: build bot (Jenkins)
|
|
Change-Id: I3ad8eed42255db426987065190c197baead40673
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6836
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Windows bugchecks on this for a while, so we ifndef'd the free() call out.
Now some Linuxes (depending on their glibc) also fail on it, so just
remove the call altogether at the cost of some leaked memory (couple
hundred kilobytes) because tracking down the precise fix is too hard.
In case someone wants to fix it, valgrind sees the issues, so
revert this change and work on romcc's memory management until valgrind
is happy.
To get a fix in, provide a good explanation why your change is actually
the right way to fix it - for silencing valgrind, this change will do.
Change-Id: Iae3f847e09a0d7bcb8bb4f50983a1b0727570b23
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6846
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
This approach avoids having same basic tables 150-lines mantra over 100 times
in codebase.
Change-Id: I76fb2fbcb9ca0654f2e5fd5d90bd62392165777c
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6801
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Change-Id: I9366dded98bf15f6da44ce893dd10698ba09fd55
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6820
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
SMI1 is being written to but never read from.
Change-Id: I82c0800713e3093eb1317b5e1f6f228771134857
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6808
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This reduces disk use and simplifies using abuild on
a ramdisk.
Change-Id: I3fb8d273dcbb5008fa9cfaa9465a59e3bbcb974b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6835
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I3d694e5b3092d78bce89f6baa7b2dedffddf3012
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6807
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: Ic044bf155bfcf93fa7cf3afd7287b7d0b615ef6d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6839
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I3463d0c283793547b00a7628f27f2f1777c21238
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6838
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Ie605efdda3b486ae6ef780266e6c651e41bb5392
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6837
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Create a new mainboard based on the AMD DB-FT3 development board
(Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3
and DB-FT3b mainboards are identical except for the soldered-down
SoC device. The new AMD DB-FT3b development board (Olive Hill+)
features:
* Mini-ITX form factor
* 2x DisplayPort
* 1x VGA
* Integrated Realtek RTL8111-compatible Ethernet
* 2x USB 3.0 ports
* 2x USB 2.0 externally-accessible ports
* 2x USB 2.0 internally-accessible ports (via headers)
* micro LPC header
* Integrated platform security processor
* 2x Full-size DDR3 DIMM support (1 channel)
* Realtek ALC272 HD audio
* 2x SATA ports
* 1x SD card slot
* 1x PCIe (x4) slot
* 1x mini-PCIe slot
* 8-pin programming header
Eliminate the extraneous headers included in PlatformGnbPcie.
BiosCallOuts normally has a bunch of extraneous references to the
mainboard name. Rather than correct the spelling of a bunch of
instances, just get rid of them.
For the most part, use the Olive Hill ACPI definitions since the
DB-FT3b board ("Olive Hill+") and Olive Hill are the same board
with different processors.
Change some function prototypes for functions without parameters
to void instead of AGESA's VOID. There are no parameters for
these functions, so there is no real reason to use VOID.
S3 and fan control are not supported. HD audio is not working.
Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/6681
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
The Linux trampoline code does not set up the segment descriptors for
__BOOT_CS and __BOOT_DS as described in the Linux kernel
documentation:
... a GDT must be loaded with the descriptors for selectors
__BOOT_CS(0x10) and __BOOT_DS(0x18); both descriptors must be 4G
flat segment; __BOOT_CS must have execute/read permission, and
__BOOT_DS must have read/write permission;
This is not a problem when launching a Linux payload from coreboot, as
coreboot configures the segment descriptors at selectors 0x10 and
0x18. Coreboot configures these selectors in the ramstage to match
what the Linux kernel expects (see
coreboot/src/arch/x86/lib/c_start.S).
When the cbfs payload is launched in other environments, SeaBIOS for
example, the segment descriptors are configured differently and the
cbfs Linux payload does not work.
If the cbfs Linux payload is to be used in multiple environments
should the trampoline needs to take care of the descriptors that Linux
requires.
This patch updates the Linux trampoline code to configure the 4G flat
descriptors that Linux expects. The configuration is borrowed from
the descriptor configs in coreboot/src/arch/x86/lib/c_start.S for
selectors 0x10 and 0x18.
The linux_trampoline code is slightly refractored by defining the
trampoline entry address, 0x40000, as TRAMPOLINE_ENTRY_LOC. This
definition is moved into a separate header file, linux_trampoline.h.
This header file is now included by both the trampoline assembly
language code and the trampoline loader C code.
The trampoline assembly language code can now use TRAMPOLINE_ENTRY_LOC
as scratch space for the sgdt CPU instruction.
Testing Done:
Verified the Linux payload is booted correctly in the following
environments:
1. Coreboot -> Linux Payload
2. Coreboot -> SeaBIOS -> Linux Payload: (previously did not work)
Change-Id: I888f74ff43073a6b7318f6713a8d4ecb804c0162
Signed-off-by: Curt Brune <curt@cumulusnetworks.com>
Reviewed-on: http://review.coreboot.org/6796
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This target does (pretty much) exactly the same what jenkins
is doing on our build nodes:
- complete abuild run of our tree with a given payload
- building all libpayload configs we ship
- building the cbmem utility
In fact at some point we could tell jenkins to just run this command.
For debugging, pass along V and Q variables so inner make processes
are slightly more noisy on demand.
Change-Id: Ib515170603a151cc3c3b10c743f1468a9875dbdc
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6797
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Ubuntu's HDMI audio has noise and echo. Disable NoSnoopEnable can
resolve this issue. The posted amd_late_init.c northbridge code
is missing a test for Steppe Eagle northbridges. See coreboot Gerrit
change 3934, commit ID 4ca721399c (AMD Olive Hill: Disable
NoSnoopEnable to fix HDMI audio corruptions with Ubuntu).
Change-Id: I89894d0ce4ad72ea16d61b445edb9e67920bca24
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/6822
Tested-by: build bot (Jenkins)
Reviewed-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This patch represents a major overhaul of the USB enumeration code in
order to make it cleaner and much more robust to weird or malicious
devices. The main improvement is that it correctly parses the USB
descriptors even if there are unknown descriptors interspersed within,
which is perfectly legal and in particular present on all SuperSpeed
devices (due to the SuperSpeed Endpoint Companion Descriptor).
In addition, it gets rid of the really whacky and special cased
get_descriptor() function, which would read every descriptor twice
whether it made sense or not. The new code makes the callers allocate
descriptor memory and only read stuff twice when it's really necessary
(i.e. the device and configuration descriptors).
Finally, it also moves some more responsibilities into the
controller-specific set_address() function in order to make sure things
are initialized at the same stage for all controllers. In the new model
it initializes the device entry (which zeroes the endpoint array), sets
up endpoint 0 (including MPS), sets the device address and finally
returns the whole usbdev_t structure with that address correctly set.
Note that this should make SuperSpeed devices work, but SuperSpeed hubs
are a wholly different story and would require a custom hub driver
(since the hub descriptor and port status formats are different for USB
3.0 ports, and the whole issue about the same hub showing up as two
different devices on two different ports might present additional
challenges). The stack currently just issues a warning and refuses to
initialize this part of the hub, which means that 3.0 devices connected
through a 3.0 hub may not work correctly.
Change-Id: Ie0b82dca23b7a750658ccc1a85f9daae5fbc20e1
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170666
Reviewed-by: Kees Cook <keescook@chromium.org>
(cherry picked from commit ecec80e062f7efe32a9a17479dcf8cb678a4a98b)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6780
Tested-by: build bot (Jenkins)
|
|
We had brought this code in from the kernel but found it best to
use mainboard- or chipset specific versions. Firmware should
strive to be as non-generic as possible.
Change-Id: Ic1ca746cc52c3f9ea4de6895f2b32946229beada
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/172625
Tested-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit 7dba0dfd25bf9e367f9e5128b15edb018e958c3a)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6779
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This patch removes the confusing concept of a special "xhci_speed" with
a different numeric value from the usual speed used throughout the USB
core (except for the places directly interacting with the xHC, which are
explicitly marked). It also moves the MPS0 decoding function into the
core and moves some definitions around in preparation of later changes
that will make the stack SuperSpeed-ready. It makes both set_address
implementations share a constant for the specification-defined
SetAddress() recovery delay and removes pointless additional delays from
the non-XHCI version.
Change-Id: I422379d05d4a502b12dae183504e5231add5466a
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170664
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit f160d4439c0d7cea1d2e6b97207935d61dcbb2f2)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6776
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
git can do lots of things by itself, no need to parse
its output and redo that.
Change-Id: Id2cdd2ea8d34c1ba2b0abddc88e1f3260d74f47d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6798
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I9b3c9109b01e348259e64e93a4397212216ab152
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6799
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Change-Id: I97ccd08a5e7f094908ed3a85ddae53b158124995
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6823
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I12ce0dda823d7733c473ed5ef3b0470d95d794ae
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6805
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Checked by comparing binaries and seeing no differences other than
build info.
Change-Id: Ie702c540a18b50d6da0379f7c4e65adf3e4f18d4
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6819
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Not referenced anywhere.
Change-Id: I6529f2ecbc34a2fa9ca720fea1224670eb98bdcd
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6815
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
