aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-09-04mainboard/amd: Add padmelon board codeRichard Spiegel
Padmelon board code was written for Merlin Falcon (family 15h models 60h-6fh), but as the needed binaries are not yet merged (commit 33615), a config HAVE_MERLINFALCON_BINARIES was added. If the binaries are not available, the board defaults to Prairie Falcon, which use the same binaries as Stoney Ridge. Once the binaries are merged, the config will be eliminated. Fan control is done through F81803A SIO, and IRQ/GPIO and other board characteristics are the same regardless of Merlin Falcon or Prairie Falcon. Padmelon board was created to accept Prairie Falcon, Brown Falcon and Merlin Falcon. The requested development was for Merlin Falcon. There are some small spec changes (such as number of memory channels) between SOCs. Brown Falcon was not investigated, Prairie Falcon is very similar to Stoney Ridge. Started from Gardenia code, added changes created by Marc Jones and finally revised against schematic, which added changes to GPIO settings. BUG=none. TEST=Both versions tested and boot to Linux using SeaBIOS. Change-Id: I5a366ddeb4cfebd177a8744f6edb87aecd4787dd Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-09-04Documentation/soc/intel/fsp: Add link for external FSP2.1 specSubrata Banik
Change-Id: I5d1abd6252bda2be09285cd878a483f055abcd7b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35238 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-04mediatek/mt8183: postpone dcxo low power mode settingWeiyi Lu
Consider the association between modem[1] and DCXO, this patch is a fix for eb5e47d("mediatek/mt8183: update dcxo output buffer setting") [2] We should not disable XO_CEL and block the bblpm request when modem is still ON. For power-saving, we still could disable unused XO_CEL and mask request to disable unused power mode when modem is no longer be used. [1] https://review.coreboot.org/c/coreboot/+/32666 [2] https://review.coreboot.org/c/coreboot/+/32323 BRANCH=none TEST=Boots correctly on Krane. Change-Id: I047ebed615e874977ca211aafd52b5551c71b764 Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-09-04Documentation/coding_style.md: Update line length limitAngel Pons
Line length limit was bumped to 96 characters, but the coding style did not reflect such a change. Change-Id: Ifdbb8bc04e49e1fbe9b0c8a642ae814d5a60004a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35215 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-04inteltool: add Lewisburg family C62x chipset PCI IDsMaxim Polyakov
These changes are in accordance with the documentation: [*] page 39, Intel(R) C620 Series Chipset Platform Controller Hub (PCH) Datasheet, May 2019. Document Number: 336067-007US Change-Id: I7a1ae0cc4c5d4b02599dfafd30f4a87b3ce74b74 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34941 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-03security/tpm/tss/tcg-2.0: Use tlcl_get_hash_size_from_algo() for hash sizeFrans Hendriks
mashal_TPMT_HA() uses size of SHA-256 hash. Use tlcll_get_hash_size_from_algo() to determince the hash size. BUG=N/A TEST=Build binary and verified logging on Facebook FBG-1701 Change-Id: I739260e13e9cd10a61d52e13e8741b12ec868d7f Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-09-03mb/google/hatch/var/kindred: Update DRAM IDs for 8G and 16G 3200David Wu
Update DRAM IDs to support 8G and 16G 3200 spds BUG=b:132920013 b:131132486 TEST=FW_NAME=kindred emerge-hatch coreboot chromeos-bootimage Change-Id: I8e55b5e24ee2cefe90472a331e829b073bf0f92a Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-09-03soc/skylake: do not rely on P2SB data to generate DRHDAngel Pons
The P2SB PCI device can be "hidden", which causes all sorts of nightmares and bugs. Moreover, FSP tends to hide it, so finding a good solution to this problem is impossible with FSP into the mix. Since the values for IBDF and HBDF were already hardcoded as FSP parameters, define them as macros and use these values directly to generate the DRHD. Change-Id: I7eb20182380b953a1842083e7a3c67919d6971b9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mimoja <coreboot@mimoja.de> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-09-03soc/intel/common/timer: Fix cosmetic errors as per CB:35148 reviewSubrata Banik
BUG=b:139798422, b:129839774 TEST=Able to build and boot KBL/CML/ICL. Change-Id: I341eec13d275504545511904db0acd23ad34e940 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35234 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-03soc/intel/common/acpi/dptf: Add fan based active cooling for TSR sensorsSumeet Pawnikar
Add fan based active cooling for TSR sensors temperature range. BUG=b:138966929 BRANCH=None TEST=Verified Fan control functionality for TSR sensors on Hatch. Change-Id: I957ae96cf6fa7d2467e73155d64f76a6bd652e31 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-09-02soc/intel/common/timer: Make TSC frequency calculation dynamicallySubrata Banik
tsc_freq_mhz() had a static table of Intel CPU families and crystal clock, but it is possible to calculate the crystal clock speed dynamically, and this is preferred over hardcoded table. On SKL/KBL/CML CPUID.15h.ecx = nominal core crystal clock = 0 Hz hence we had to use static table to calculate crystal clock. Recommendation is to make use of CPUID.16h where crystal clock frequency was not reported by CPUID.15h to calculate the crystal clock. BUG=b:139798422, b:129839774 TEST=Able to build and boot KBL/CML/ICL. Change-Id: If660a4b8d12e54b39252bce62bcc0ffcc967f5da Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35148 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-02soc/skylake: prevent null pointer dereferencesAngel Pons
Change-Id: Ide10223e7fc37a6c4bfa408234ef3efe1846236a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-02soc/intel/quark: Remove variable set but not usedElyes HAOUAS
Change-Id: I09292c2776309982cfb4d72012991bf7725b75fb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32912 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-02ec/kontron/kempld: Select DRIVERS_UART_8250IONico Huber
Change-Id: I1d0a46b6e4fc3aea403e2adce987de30703358c7 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31366 Reviewed-by: Thomas Heijligen <src@posteo.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-02soc/intel/skylake: enable GMM in devicetreeMaxim Polyakov
Enables Gaussian Mixture Model (GMM) only if the corresponding pci device is enabled in the device tree Tested on Asrock H110M DVS motherboard Change-Id: I21409adf85b70bccc30dd8e12a03ad7921544b3c Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-02mb/facebook/watson: Select no UART on SuperIOPatrick Rudolph
Select NO_UART_ON_SUPERIO as the SoC internal UART is used. The current code is working, so this is just a cosmetic fix to remove some unused options from Kconfig. Change-Id: I206557c397da74b572e669feb1e38f0c8473d0d9 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35151 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-02mediatek/mt8183: Remove unnecessary parenthesesYu-Ping Wu
Parentheses are unnecessary for conditions like '(a == b) || (c == d)'. Change-Id: I0c554bf1577b40286f7a51a8fc5804bdbb7c8bd1 Signed-off-by: Yu-Ping Wu <yupingso@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35142 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Huayang Duan <huayang.duan@mediatek.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-02mb/google/drallion: add memory sku idEric Lai
Drallion will use soldered down memory and use GPP_F12 to GPP_F16 indicates mem_id. BUG=b:139397313 BRANCH=N/A TEST=N/A Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ib5ada54fd2b8f358b59de8089e5405cf3e34825a Reviewed-on: https://review.coreboot.org/c/coreboot/+/35133 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-09-02mb/google/drallion: Enable HDA for drallion platformAamir Bohra
Enable PchHdaIDispCodecDisconnect and PchHdaAudioLinkHda for drallion variants. This is needed with FSP 1263. Signed-off-by: Selma BENSAID <selma.bensaid@intel.com> Change-Id: I13d3dd832c6fbdc2aad5ba578695edb8470806e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35079 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-02arch/ppc64: move misc.c to qemu-power8 as timer.cMarty E. Plummer
Its entirely no-op and is getting in the way of real hardware timers for power9/talos ii. Change-Id: I2d21d4ac3d1a7d3f099ed6ec4faf10079b1ee1d1 Signed-off-by: Marty E. Plummer <hanetzer@startmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35082 Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-02mb/google/hatch/var/helios: Increase touchscreen reset delay to 120msPhilip Chen
As per GT7375P programming guide rev0.4, we want to enforce a delay of 120ms after the reset is completed, before HID_I2C starts. BUG=b:140276418 Signed-off-by: Philip Chen <philipchen@google.com> Change-Id: Id69a9db996bcd9001ef850c50898fbd55327b4df Reviewed-on: https://review.coreboot.org/c/coreboot/+/35158 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-09-02payloads/external/LinuxBoot: Add curl flagMarcello Sylvester Bauer
add --show-error curl flag to see the error message, even on silent mode. Signed-off-by: Marcello Sylvester Bauer <sylvblck@sylv.io> Change-Id: I4ad40718caab60413ffe9c1503a9870cb875dd43 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-02mb/ocp/monolake: use VPD data to configure FSP UPDJonathan Zhang
Summary: This patch calls monolake board specific function to query settings stored in VPD binary blob to configure FSP UPD variable HyperThreading. Test Plan: * Build an OCP MonoLake coreboot image, run following command to initialize RW_VPD and insert HyperThreading key: vpd -f build/coreboot.rom -O -i RW_VPD -s 'HyperThreading=0' * Flash the image to MonoLake, boot and observe following message in boot log: Detected 16 CPU threads If RW_VPD partition does not exist, or if HyperThreading key/value pair does not exist, the boot log has: Detected 32 CPU threads Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I799d27734fe4b67cd1f40cae710151a01562b1b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-09-02drivers/vpd: add framework to search VPD in romstageJonathan Zhang
Summary: Added a framework to search VPD in romstage before memory is avilable. vpd_cbmem.c and vpd_premem.c are added for code specific for premem environment and for environment that cbmem can be used. Since global variable is forbidden in romstage. A CAR_GLOBAL variable is defined in vpd.c. This variable holds VPD binary blobs' base address and size from memory mapped flash. The overall flow is: * The CAR variable g_vpd_blob is initialized if it was not, either at romstage (before FSP-M execution in case of FSP UPD customization), or at ramstage. * At ramstage, during CBMEM_INIT, the VPD binary blob contents are copied into CBMEM. * At vpd_find() which may be called at romstage or at ramstage, it sets storage for a local struct vpd_blob variable. * The variable gets contents duplicated from g_vpd_blob, if vpd_find() is called at romstage. * The variable gets contents obtained from CBMEM, if vpd_find() is called at ramstage. Added a call vpd_get_bool(). Given a key/value pair in VPD binary blob, and name of a bool type variable, set the variable value if there is a match. Several checks are in place: * The key/value length needs to be correct. * The key name needs to match. * THe value is either '1' or '0'. Test Plan: * Build an OCP MonoLake coreboot image, flash and run. Tags: Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: Iebdba59419a555147fc40391cf17cc6879d9e1b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-09-02vboot: remove fastboot supportJoel Kitching
Fastboot support in vboot_reference is unused, unmaintained, and produces compile errors when enabled. Since there is no current or planned use cases for fastboot, remove it. BUG=b:124141368, chromium:995172 TEST=make clean && make test-abuild BRANCH=none Change-Id: I06ea816ffb910163ec2c3c456b3c09408c806d0b Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35002 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-02mb/*: Use common IPMI KCS driverPatrick Rudolph
Remove duplicated code and instead use the IPMI KCS driver, which provides the same functionality. Change-Id: I419713c9bef02084cca1ff4cf11c33c2e3e8d3c1 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrey Petrov <anpetrov@fb.com>
2019-09-02drivers/ipmi/ipmi_kcs_ops: Advertise correct register spacingPatrick Rudolph
Advertise the register spacing used by the BMC as set by the Kconfig. Tested on OCP Monolake. Change-Id: Ib926d30f6a0e78fbf613a6f71f765c5f51eee77d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35152 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-09-02security/intel: Add TXT infrastructurePatrick Rudolph
* Add Kconfig to enable TXT * Add possibility to add BIOS and SINIT ACMs * Set default BIOS ACM alignment * Increase FIT space if TXT is enabled The following commits depend on the basic Kconfig infrastructure. Intel TXT isn't supported until all following commits are merged. Change-Id: I5f0f956d2b7ba43d4e7e0062803c6d8ba569a052 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2019-09-01mb/asrock/h110m: rewrite gpio config using macrosMaxim Polyakov
This format of PCH GPIOs configuration, unlike the raw DW0 and DW1 [1] registers values from the inteltool dump, is more understandable and makes the code much cleaner. The pad configuration in this patch was generated using the pch-pads-parser utility [2]. The inteltool dump before and after the patch is identical (see notes) Notes: 1. For some reason, GPIO RX State (RO) for the GPP_F4 and GPP_G10 changed the value to 0, but this doesn't affect the motherboard operation. Perhaps this is because PAD_CFG1_GPIO_DRIVER is set to PAD_CFG_GPI_INT(), and the pad is not actually connected. So far I haven't circuit diagram to check this out. 2. According to the documentation [1], the value 3h for RXEVCFG is implemented as setting 0h. 3. If the available macros from gpio_defs.h [3] can't determine the configuration of the pad, the utility [2] generates common _PAD_CFG_STRUCT() macros [1] page 1429,Intel (R) 100 Series and Intel (R) C230 Series PCH Family Platform Controller Hub (PCH), Datasheet, Vol 2 of 2, February 2019, Document Number: 332691-003EN [2] https://github.com/maxpoliak/pch-pads-parser/tree/stable_1.0 [3] src/soc/intel/common/block/include/intelblocks/gpio_defs.h Change-Id: I01ad4bd29235fbe2b23abce5fbaaa7e63c87f529 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-09-01mb/supermicro/x11ssh: Add Supermicro X11SSH-TFChristian Walter
Add support for the X11SSH-TF which is based on Intel KBL. Working: * SeaBIOS payload * LinuxBoot payload * IPMI of BMC * PCIe, SATA, USB and M.2 ports * RS232 serial * Native graphics init Not working: * TianoCore doesn't work yet as the Aspeed NGI is text mode only. * Intel SGX, due to random crashes in soc/intel/common For more details have a look at the documentation. Please apply those patches as well for good user experience: Ica0c20255f661dd61edc3a7d15646b7447c4658e Signed-off-by: Christian Walter <christian.walter@9elements.com> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Felix Singer <felix.singer@9elements.com> Change-Id: I2edaa4a928de3a065e517c0f20e3302b4b702323 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-08-31arch/x86: Remove WB attribute from 0..CACHE_TMP_RAMTOPKyösti Mälkki
Platforms using postcar are with RELOCATABLE_RAMSTAGE=y. They don't benefit from having low-memory set as writeback-cacheable. This also fixes regression from CB:34893 that caused some random hangs with more recent intel SoCs in ramstage. BUG=b:140250314 Change-Id: Ia66910a6c85286f5c05823b87d48edc7e4ad9541 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-08-30mb/google/octopus/variants/garg: update new SKUKevin Chiu
For Garg EVT build, add new SKU ID below: SKU4 LTE DB, touch: SKU ID - 18 SKU5,6 Convertible, 2A2C, Touch, Stylus, rear camera: SKU ID - 37 BUG=b:134854577 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: Iea1d17efb9a5f274f8eefb2aaa683e75ab5de7d2 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-08-30mb/google/kahlee/variants/careena: override DRAM SPD tableKevin Chiu
override DRAM SPD and add new 4 DRAM: Samsung (TH) K4AAG165WA-BCTD Hynix (TG) H5ANAG6NCMR-XNC Micron (TF) MT40A1G16RC-062E:B Samsung (TH) K4AAG165WA-BCWE BUG=b:139912383 BRANCH=master TEST=emerge-grunt coreboot chromeos-bootimage extract spd.bin and confirm 4 new SPD was added. Change-Id: Ie1b2c1bae5ffe9f3a6a6560348f6e1b117ffd457 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35149 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-08-30google/buddy: adjust CID for realtek audio codecMatt DeVillier
Adjust CID to allow for Windows driver to attach without breaking functionality under Linux. Same change made as to google/cyan (which uses same Realtek RT5650 codec) in commit 607d72b. Test: build/boot Windowns 10 on google/buddy, observe audio drivers correctly attached to codec and Intel SST devices. Change-Id: I839acc8427ee9b5c425885858a513e9b0b9d0f93 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30564 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-30ipq40xx: Increase CBFS and RAMSTAGE sizeKan Yan
Increase CBFS and RAMSTAGE size to accommodate larger binary component. BUG=b:77641795 TEST=Build and test on Gale. BRANCH=none Change-Id: I25f7121221ab2bb66dfedbc4a66e06976d88cef5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: e4d3d2d078d0a8f705afe2b6c741118727614bf0 Original-Change-Id: I6ad16c0073a683cb66d5ae8a46b8990f3346f183 Original-Signed-off-by: Kan Yan <kyan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/1366388 Original-Reviewed-by: Zhihong Yu <zhihongyu@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35134 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-30Kconfig: Write tmp files into same directory as target filesRaul E Rangel
This removes the need for COREBOOT_BUILD_DIR in Kconfig. Since the original files will be replaced with the tmp file, the parent directory already needs to be writable. Before this change, the tmp files would be created in the CWD (src) if COREBOOT_BUILD_DIR was not specified. BUG=b:112267918 TEST=emerge-grunt coreboot and verified no tmp files were created in the src directory. Change-Id: Icdaf2ff3dd1ec98813b75ef55b96e38e1ca19ec7 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34244 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-30kconfig: Use config's full path when generating tmp fileRaul E Rangel
If KCONFIG_CONFIG is set to a full path, we should generate the tmp file in the same directory instead of the current working directory. BUG=b:112267918 TEST=emerge-grunt coreboot and verified with print statements that the correct path was used. Change-Id: Ia21e930a9b0a693f851c34bcde26b34886cbe902 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34243 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-08-30ec/google/chromeec: Add config option for eSPIMartin Roth
The Intel platforms using eSPI EC communication have just been enabling the EC_GOOGLE_CHROMEEC_LPC option for simplicity. This does basically the same, but at least marks it as eSPI in Kconfig for clarity. BUG=b:140055300 TEST=Build tested only. Change-Id: Ib56ec9d1dc204809a05c846494ff0e0d69cf70ea Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35128 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-30soc/intel/skl/acpi: add description for missing PCIe portsMaxim Polyakov
According to the documentation, Sunrise PCH-H [1,2] and Lewisburg PCH [3] supports up to 16 PCIe ports. However, ACPI contains a description for only 12 ports. This patch adds ACPI code for missing ports [1] page 182, Intel (R) 100 Series and Intel (R) C230 Series PCH Family Platform Controller Hub (PCH), Datasheet, Vol 1 of 2, December 2018, Document Number: 332690-005EN [2] page 180, Intel (R) 200 Series and Intel (R) Z370 Series PCH Family Platform Controller Hub (PCH), Datasheet, Vol 1 of 2, October 2017, Document Number: 335192-003 [3] page 39, Intel(R) C620 Series Chipset Platform Controller Hub (PCH) Datasheet, May 2019. Document Number: 336067-007US Change-Id: I954870136e0c8e5ff5d7ff623c7a6432b829abaf Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-30soc/intel/skylake: Remove duplicated PCI IdMaxim Polyakov
Removes PCI_DEVICE_ID_INTEL_SKL_ID_DT because this PCI Id duplicates PCI_DEVICE_ID_INTEL_SKL_ID_S_4 (0x191f) Change-Id: I028a22d6a42c040f5991a03def3e410f515c1c7f Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35121 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-30mb/google/drallion: change servo board debug to UART 0Eric Lai
Drallion will change debug port UART from 2 to 0. Followed HW schematic to modify it. BUG=b:139095062 BRANCH=N/A TEST=Build without error Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ib2bcded8de3c9fb2c0a4ccbd002b1f219bccceb5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-08-30mb/google/hatch: Add settings for noise mitgationDtrain Hsu
Enable acoustic noise mitgation for hatch platform, the slow slew rates are fast time dived by 8 and disable Fast PKG C State Ramp(IA, GT, SA). BUG=b:131779678 TEST=waveform test and reduce the noise level. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I49e834825b3f1e5bf02f9523d7caa93b544c9d17 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35005 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-08-30arm64: Rename arm_tf.c/h to bl31.c/hJulius Werner
This patch renames arm_tf.c and arm_tf.h to bl31.c and bl31.h, respectively. That name is closer to the terminology used in most functions related to Trusted Firmware, and it removes the annoying auto-completion clash between arm64/arm_tf.c and arm64/armv8. Change-Id: I2741e2bce9d079b1025f82ecb3bb78a02fe39ed5 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-08-30mb/google/hatch: Add 16G 3200 generic SPD fileShelley Chen
BUG=b:139792883 BRANCH=None TEST=None Change-Id: I22974b015a40fb7ae592e182cf5da83a8252c031 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35138 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-08-30intel/quark: Use common romstage entryKyösti Mälkki
Change-Id: Ifb2adcdef7265d43cb2bf6886f126f1a17bf08a0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35146 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-30intel/quark: Select NO_SMMKyösti Mälkki
SoC was unintentionally flagged with SMM_TSEG when default values were assigned. Change-Id: I83202316f41ead66c7f69cad68dafaeccd09df66 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35145 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-30intel/quark: Remove extra steps on entry to romstageKyösti Mälkki
Change-Id: I9297d5b4f7c8ed703fb8772739531cdd7d5ca5f0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34965 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-29arch/arm64: Make ARM64 stages select ARCH_ARM64Arthur Heymans
Also don't define the default as this result in spurious lines in the .config. The only difference in config.h is on boards with the Nvidia tegra210 SOC that now select ARCH_ARM64, because its ramstage runs in that mode. The resulting binary is identical however. Change-Id: Iaa9cd902281e51f823717f6ea4c72e5736fefb31 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31315 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-29arch/arm: Make ARM stages select ARCH_ARMArthur Heymans
This removes the need to select ARCH_ARM in SOC Kconfig Also don't define the default as this result in spurious lines in the .config. Change-Id: I1ed4a71599641db606510e5304b9f0acf9b7eb88 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31313 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-29intel/fsp_broadwell_de: Move and rename smm_lock()Kyösti Mälkki
There will be inlined smm_lock() that would conflict with this special case. Change-Id: I6752cbcf4775f9c013f0b16033b40beb2c503f81 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34874 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-29mb/google/drallion: Update memory mapBernardo Perez Priego
This will enable to optionally inject ISH binaries into coreboot. BUG:b:139820063 TEST='compile successfully' Change-Id: I38659460726a3f647cda3bc3efd442f18aea24f0 Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-08-29mb/google/drallion: Correct drallion HWID and add HWID for variantsMathew King
The current HWID for drallion is reported as invalid by chrome, generate new valid HWID with the following command and taking last 4 digits. `printf "%d\n" 0x$(crc32 <(echo -n '$1'))` BUG=b:140013681 Change-Id: I410d37fc3f3372e9420d674b65f2c9a704b670f2 Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35104 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-08-29Documentation/acpi: Add new document on adding ACPI devices to devicetreeTim Wawrzynczak
Change-Id: I9636e65f7d2499b06b1d71e5f8d09c528b850027 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35080 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-08-29arch/x86: Fix clearing .bss sectionKyösti Mälkki
Using stosl clears 4 bytes at a time. Change-Id: Ie54fcfcb7e5a2a5a88d988476aa69b2a163e919c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35139 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-08-29arch/x86: remove weak car_stage_entry() symbolAaron Durbin
Many (if not all) platforms have moved to using consistent boot flow constructs where a weak car_stage_entry() is no longer necessary to avoid the complexity of handling the numerous and different boot flow combinations. The weak symbol is just causing issues so remove it. Change-Id: I7e7897c0609aac8eef96a08bb789374b2403956d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35135 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-29intel/fsp_broadwell_de: Use smm_subregion()Kyösti Mälkki
Tested on OCP/Wedge100s: No error is visible in console output, still boots to OS. Change-Id: I986bbe978d3f68693b2d4538ccbcc11cdbd23c6a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34745 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-29soc/intel/fsp_broadwell_de: Implement SystemAgent TSEG functionsPatrick Rudolph
Implement sa_get_tseg_base and sa_get_tseg_size. Used by Intel TXT and the new SMM API. Tested on OCP/Wedge100S. Change-Id: I22123cbf8d65b25a77fbf72ae8411b23b10c13b4 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33418 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-08-28arch/x86: Drop weak attribute on stage_cacheKyösti Mälkki
There are no more cases that need to override this. Change-Id: Iafa94af19eae00cc5be5d4ff7454066558e3c74f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34741 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-28intel/broadwell: Use smm_subregion()Kyösti Mälkki
Change-Id: I95f1685f9b74f68fd6cb681a614e52b8e0748216 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34738 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-28intel/haswell: Use smm_subregion()Kyösti Mälkki
Change-Id: Idfb13ab03d4d4ae764bdda62a29848db9d8dcd81 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34737 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-28intel/haswell,broadwell: Rename EMRR to PRMRRKyösti Mälkki
The MSRs were already named as PRMRR in broadwell, just mismatching with the rest of the code. All later devices use the names PRMRR and UNCORE_PRMRR for these MSRs. Reflect the name change in structures and local variables. Change-Id: Id825ba2c083d0def641dd9bf02d3b671d85b1e35 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34825 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-28intel/smm/gen1: Use smm_subregion()Kyösti Mälkki
Change-Id: I371ed41f485b3143e47f091681198d6674928897 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34740 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-28intel/braswell: Use smm_subregion()Kyösti Mälkki
Change-Id: I4af661f68c158cbed591fe017d4bc25239bddd37 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34758 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-28intel/fsp_baytrail: Use smm_subregion()Kyösti Mälkki
Change-Id: I4e9de9c7f5decd784d881e5a733e995522be5226 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34757 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-28google/rambi,intel/baytrail: Simplified romstage flowKyösti Mälkki
Change-Id: I99440539d7b7586df66395776dcd0b4f72f66818 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34964 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-28soc/intel: Move fill_postcar_frame to memmap.cKyösti Mälkki
Change-Id: I84b1fad52d623a879f00c3f721f480f58d7d6d8a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34894 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Guckian Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-28Makefile: Pass .xcompile into genbuild_hRaul E Rangel
I'm moving the .xcompile file into the $(obj) directory so we can leave the source pristine. We need to pass the location of .xcompile into genbuild_h.sh. BUG=b:112267918 TEST=Ran genbuild_h with and without an .xcompile and verified it was passed. Change-Id: I8b3a75b478fad92a0b09246f0a00b0580f8c4aef Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34240 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-08-28what-jenkins-does: Use abuild's -Z optionPatrick Georgi
This reduces disk usage during builds by removing all object files and other intermediate files directly after a build instead of waiting for the entire build to pass. Change-Id: Ic2feecd58658e8bac8c6e7a851737784e35b83ef Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35112 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-28abuild: Add -Z / --clean-somewhat optionPatrick Georgi
This option removes everything in the build tree but coreboot.rom, config.build, config.h and make.log - a useful subset of the tree for further testing. Change-Id: I27e559d8d7dc90d8fe5c4ed8e25249e202e5da36 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35136 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-28mb/google/hatch/variants: Increase touchscreen reset delay to 120msSumeet Pawnikar
During boot sequence sometime touchscreen reset keeps failing. Also, kernel dmesg shows "dmesg:i2c_hid i2c-GDIX0000:00: failed to reset device" message. This adds around 4 more seconds to the boot sequence. Setting the appropriate delay of 120ms between enable and reset for Goodix Touchscreen helps to synchronize and address this failure. This value is 120 ms as per Goodix Spec. BUG=b:138413748 BRANCH=None TEST=Built and tested on Hatch system Change-Id: I15005c568f285ec7bad9a0bec4498e2fdd20782b Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34626 Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-28arch/x86/postcar: unexpose postcar_commit_mtrrs() symbolAaron Durbin
postcar_commit_mtrrs() isn't used outside the postcar_loader compilation unit. Make it static to reduce API surface area. Additionally the return value was not being utilized. Modify the return type to be void to align with the current usage. Change-Id: If07f34467941d00de731489867e485cfff80ea63 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35130 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-08-28google/leon: Add DRIVERS_I2C_RTD2132Kyösti Mälkki
This is LVDS bridge, I assume this was lost while upstreaming or converting boards to variants. Change-Id: I816a6b4035c4e935150cc77089c4224eee719c10 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35106 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2019-08-28lenovo/t431s,w530: Add DRIVERS_RICOH_RCE822Kyösti Mälkki
Device is present in devicetree but not included in the build. Change-Id: I8555d94902e94c623d8fbe6f1a4ffe7637988530 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35105 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-28soc/intel/cnl: Add CML IGD IDsMeera Ravindranath
BUG=b:139798422 TEST=Build and boot CMLRVP. Change-Id: Ib79995606f6da12bfa7aa5c1a1dbc0b972bb1688 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Signed-off-by: Usha P <usha.p@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
2019-08-28mb/google/hatch: Enable Override DLLs for KindredJamie Chen
Enable SOC_INTEL_COMMON_MMC_OVERRIDE for Kindred BUG=b:136784418 BRANCH=none TEST=Boot to OS 100 times on Kindred proto 1 board. Change-Id: I390d237b9119ae42f4b0bb802bf9857552af78bf Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-28soc/intel/common/block: Provide mmc.c for setting dll registersKane Chen
Currently, we don't have UPDs to set emmc settings per mainboard on CML. This code change is to create mmc.c to provide interface to override dll settings per mainboard. Notice: set_mmc_dll function will override the dll values in FSP. BUG=b:131401116 BRANCH=none TEST=Boot to OS and confirm the dll values have been overridden. Change-Id: Ib3c72b9851f41585ec099d8ae83a721af87ed383 Signed-off-by: Kane Chen <kane.chen@intel.com> Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35040 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-28mb/google/hatch: Override DLL values for KindredJamie Chen
New emmc DLL values for Kindred BUG=b:136784418 BRANCH=none TEST=Boot to OS 100 times on Kindred proto 1 board. Change-Id: I52acb445c47fcdb9b60512dd501d810b1ae4dc10 Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35041 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-28Makefile: Move the .xcompile rule out of the if !NOCOMPILE blockRaul E Rangel
Generating the .xcompile file should be possible even without a config. BUG=b:112267918 TEST=Ran make and verified .xcompile was created Change-Id: I8075f71e6e3e2c150378818eeff2858c36b35843 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-08-28AUTHORS: Move src/arch/ppc64 copyrights into AUTHORS fileMartin Roth
As discussed on the mailing list and voted upon, the coreboot project is going to move the majority of copyrights out of the headers and into an AUTHORS file. This will happen a bit at a time, as we'll be unifying license headers at the same time. Additional changes in this patch: - Move descriptions below the license header Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I51d5b1f01ff47ed752761116e3f32cb9e168584f Reviewed-on: https://review.coreboot.org/c/coreboot/+/34637 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-28mb/google/drallion: remove GBE fileEric Lai
Drallion doesn't have on board LAN, remove GBE bin file config. BUG=b:139906731 TEST=emerge-drallion coreboot chromeos-bootimage and check image-drallion.bin not include GBE region Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ifbc295afd8d875b5098b0ce75252b51523a5c76e Reviewed-on: https://review.coreboot.org/c/coreboot/+/35114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-08-28mb/google/drallion: add dummy SPD fileEric Lai
Drallion will use soldered down memory. Add dummy spd file. BUG=b:139397313 BRANCH=N/A TEST=Build and check cbfs has the dummy spd.bin Change-Id: Ife59c2dd689d72b117f30e832a3ce7eed4fa4220 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35113 Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-28mb/google/poppy/variant/nami: add sku ids of bard/ekkoRen Kuo
add sku ids of bard/ekko BUG=b:139886622 TEST=emerge-nami coreboot Change-Id: Iabc3d587c3839e4a3121cea8504c50e2dc4f9699 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35115 Reviewed-by: Vincent Wang <vwang@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: YH Lin <yueherngl@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-27intel/baytrail: Use smm_subregion()Kyösti Mälkki
Change-Id: Ic2677bcf9f2f79c4db725ebcf342a8575ee7bc38 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34739 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-27intel/baytrail: Reorganize romstage.cKyösti Mälkki
Done just for future review convenience. Change-Id: I9cfb0a8177c8ca18947ef0109550a36aa4333383 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34910 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-27smsc/superio/sio1007: Fix header nameKyösti Mälkki
The file chip.h has a special purpose for defining the configuration structure used in static devicetree. Change-Id: If0289c29ca72768009c1b7166311bc4c3cee4171 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-08-27soc/intel/fsp_broadwell_de: Add ACPI HPET tableJohnny Lin
Tested on Mono Lake TEST=Note the kernel log: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter Change-Id: Idae9a7d3d4233037214d6203996bf44fe5f3a845 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35027 Reviewed-by: Johnny Lin Reviewed-by: Andrey Petrov <anpetrov@fb.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-27soc/intel/{apl,cnl,dnv,icl,skl} : Use common cpu/intel/car/romstage.c codeSubrata Banik
This patch includes common romstage code to setup the console and load postcar. Fix booting regression issue on all latest IA-SOC introduced by CB:34893 Change-Id: I9da592960f20ed9742ff696198dbc028ef519ddf Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-27libpayload/usb: add USB 3.1 GEN2 supportEric Lai
USB 3.1 GEN2 report speed type 4, add into speed enum. BUG=b:139787920 BRANCH=N/A TEST=Build libpayload and depthcharge on sarien and boot with USB GEN2 HUB with USB disk. Check ultra speed device in cbmem log. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ia0ef12b2f0d91bf0d0db766bbc9019de1614a4f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35023 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-27AUTHORS: Move src/arch/mips copyrights into AUTHORS fileMartin Roth
As discussed on the mailing list and voted upon, the coreboot project is going to move the majority of copyrights out of the headers and into an AUTHORS file. This will happen a bit at a time, as we'll be unifying license headers at the same time. Additional changes in this patch: - Remove comments saying that a file is based on another file from the coreboot project. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: If61689db67c58f0d66ab96ca749bfcd589935ce2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34607 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-27build system: add kconfig/toada to tools listPatrick Georgi
Without this, we're lacking a serialization point in abuild when doing parallel builds. This manifests in parallel attempts to write the toada binary, which fails. Change-Id: Id6ebbb3750284225670608e4927d80c4eea96afb Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35107 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2019-08-26intel/car: Use common TS_START_ROMSTAGEKyösti Mälkki
This timestamp also got unintentionally removed from some boards as they were transformed to use common romstage entry. Change-Id: I12be278a674f9a2ea073b170a223c41c7fc01a94 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34970 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-26x86: Introduce RESET_VECTOR_IN_RAM optionMartin Roth
Create a new Kconfig symbol that allows an x86 device to begin execution when its reset vector is in DRAM and not at the traditional 0xfffffff0. The implementation will follow later, this is just to setup various ENV_xxx definitions correctly for the build environment. Change-Id: I098ecf8bf200550db1e15f178f7661c1ac516dc5 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35004 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-26arch/x86: Simplify <arch/early_variables.h>Kyösti Mälkki
This enables the use of .bss section for ENV_BOOTBLOCK and ENV_VERSTAGE even with CAR_GLOBAL_MIGRATION=y. In practice, boards with CAR_GLOBAL_MIGRATION=y currently build with romcc-bootblock so they will not be using .bss. Change-Id: Ie9dc14f3e528d3e4f48304f4d7de50df448a8af6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-26what-jenkins-does: keep essential artifacts aroundsPatrick Georgi
Keep for every board: coreboot.rom, config.h, config.build That way these can be used in follow-up jobs. Change-Id: I5ca5cb84ab1bcffbc92a972980cd0769ebf02462 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-08-26emulation/qemu-x86: Rename memory.c to memmap.cKyösti Mälkki
Change-Id: I311423cb565485236f89bd6043155aaf6296a031 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34974 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-26emulation/qemu-x86: Use common romstage codeKyösti Mälkki
This provides stack guards with checking and common entry into postcar. Change-Id: If0729721f0165187946107eb98e8bc754f28e517 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34973 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-26lib/bootblock: Add simplified entry with basetimeKyösti Mälkki
This allows for minor optimization as num_timestamps becomes a constant zero for a function with local scope. The loop with calls to timestamp_add() gets removed from bootblock. Change-Id: Id230075c0e76fe377b6ea8c8ddf8318e07d29b91 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34972 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-26soc/intel: Use common romstage codeKyösti Mälkki
This provides stack guards with checking and common entry into postcar. The code in cpu/intel/car/romstage.c is candidate for becoming architectural so function prototype is moved to <arch/romstage.h>. Change-Id: I4c5a9789e7cf3f7f49a4a33e21dac894320a9639 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34893 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-26arch/non-x86: Use ENV_ROMSTAGE_OR_BEFOREKyösti Mälkki
Change-Id: I9dbf0fc14516f766fd164c7308906456f2865e89 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34982 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-26Add definition for ENV_ROMSTAGE_OR_BEFORE to <rules.h>Kyösti Mälkki
ENV_ROMSTAGE_OR_BEFORE is a direct replacement for testing defined(__PRE_RAM__) as a true statement instead of with the help of the preprocessor. Note that for x86, due to existence of ENV_POSTCAR and ENV_SMM, ENV_ROMSTAGE_OR_BEFORE and ENV_RAMSTAGE are not the inverse of each other. Change-Id: Ibd2292f922ccb9e79d10ca9bc35797048d174287 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34939 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-19 20:44:38 +0000