summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-21soc/intel/skylake: acpi: drop HWP's dependency on EISTMichael Niewöhner
Enhanced Intel SpeedStep Technology (EIST) and Intel Speed Shift Technology (ISST) - also know as HWP - are two independent mechanisms for controlling voltage and frequency based on performance hints. When HWP is enabled, it overrides the software-based EIST. It does not depend on EIST, though, but can be enabled on its own. Break up that currently existing dependency in ACPI generation code. It was tested that HWP can be enabled and gets used by the Linux pstate cpufreq driver. With HWP disabled, the frequency does not decrease, even not in powersave mode. After enabling HWP the frequency changed in relation to the current workload. (Test device: Acer ES1-572) Change-Id: I93d888ddce7b54e91b54e5b4fdd4d9cf16630eda Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44137 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21mb/google/octopus: Clean up LTE power off functionEric Lai
All octopus board share the same power off sequence. Move to smihandler.c instead variant.c. BUG=b:168075958 BRANCH=octopus TEST=build image and verify on the DUT with LTE DB. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I2be5a656fb42fff99c56d21aaa73ed9140caad37 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45436 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21nb/intel/sandybridge: Check ME status only onceAngel Pons
The pre-RAM CBMEM console is tiny. Do not fill it with largely redundant information, when we could instead store more useful raminit debug logs. Change-Id: I3a93fdeb67b0557e876f78b12241b70933ad324d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-21nb/intel/sandybridge: Simplify SPD validity checkAngel Pons
Instead of decoding the entire SPD, just check the memory type directly. Tested on Asus P8Z77-V LX2, still boots. Change-Id: I3afa0ca5aae984895e50fe7b3792192fdd2ee6c6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-21util/autoport: Always output quoted Kconfig stringIru Cai
Change-Id: I2076af9c70b626673a83af9abf464d376cda711b Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-21mb/intel/tglrvp: Enable HECI interfaceJamie Ryu
This is to enable Intel ME communication interface HECI1 by devicetree for PAVP with CSE Lite. PAVP feature is enabled with CSE Lite SKU for Chrome and HECI1 interface is required between kernel and CSE Lite. BUG=None TEST=Build and boot tglrvp. Run lspci and check pcie device 00:16.0 Communication controller: Intel Corporation Device a0e0 Change-Id: I23117fa96503942e6a72765dd3fd1cc762e3f705 Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-21drivers/intel/mipi_camera: Avoid resource leakJohn Zhao
Coverity detects variable dsd going out of scope leaks the storage it points to. Move dsd resource allocation after sanity check for config->nvm_compact to avoid leak. Found-by: Coverity CID 1432727 TEST=Built and boot up to kernel on Volteer. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I86af322dc78845b8b312b6815135336c2c56b4dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/45531 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-21cpu/x86/smm.h: Add function to return the SMM save state revisionArthur Heymans
Change-Id: I3e4450088adbb654050e7420956cf58ee1170a98 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44318 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21mb/google/dedede/var/madoo: Add Wifi SAR for madooDtrain Hsu
Add wifi sar for madoo. Using tablet mode of fw config to decide to load custom wifi sar or not. BUG=b:165105210 TEST=enable CHROMEOS_WIFI_SAR in config of coreboot, emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Ic6128b966c952cdc02a6359c14fa41f22265039a Reviewed-on: https://review.coreboot.org/c/coreboot/+/45439 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-09-21soc/amd/common/block/spi/fch_spi_util.c: Fix read with invalid lengthIgor Bagnucki
Fix function call to invoke 16-bit read in 16-bit api instead of 8-bit read. Signed-off-by: Igor Bagnucki <bagnucki02@gmail.com> Change-Id: Ifd9079fc6446125e0e58402fdb64bc198bb8e381 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-09-21arch/arm: Add support for loading Linux kernelsSam Lewis
Adds support for loading Linux kernels through FIT payloads. This has been implemented as an assembly function in order to simplify dealing with some of the intricacies of loading a kernel (such as needing to jump to the kernel in ARM mode and the kernel ABI). TEST: Booted a FIT image containing a 5.4 kernel and initramfs on the Beaglebone Black. Change-Id: I7dbf9467665ec17447cec73676763844b4be4764 Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-21mb/51nb/x210/gpio: 3/4 Fix PAD_RESET to convert to PAD_NC()Maxim Polyakov
Fix this bit field to convert to target macros PAD_NC() macros. This is part of the patch set "mb/51nb/x210/gpio: Rewrite pad config using intelp2m": CB:43566 - 1/4 Decode raw register values CB:43567 - 2/4 Exclude fields for PAD_CFG CB:43568 - 3/4 Fixes PAD_RESET to convert to PAD_NC() CB:43410 - 4/4 Convert field macros to PAD_CFG Change-Id: I73a3d78457c1e50dc9625a47394e340181516696 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43568 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21mb/51nb/x210/gpio: 2/4 Exclude fields for PAD_CFGMaxim Polyakov
This patch excludes bit fields that must be ignored (1,2) in order to convert current macros to target PAD_CFG_*() macros. The following commands were used for this: ./intelp2m -fld cb -ign -t 1 -file ../../src/mainboard/51nb/x210/gpio.h - ignore RO bit fields; - ignore RX Level/Edge Configuration (bit 26:25) and RX/TX Buffer Disable (bit 9:8) for the native function, because it does not affect the pad in this mode. This is part of the patch set "mb/51nb/x210/gpio: Rewrite pad config using intelp2m": CB:43566 - 1/4 Decode raw register values CB:43567 - 2/4 Exclude fields for PAD_CFG CB:43568 - 3/4 Fixes PAD_RESET to convert to PAD_NC() CB:43410 - 4/4 Convert field macros to PAD_CFG Change-Id: Id0196b20783126c36f8552534b7ec3bd9049a24f Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43567 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21security/tpm/tss/tcg-2.0: add const to marshalling functionsCaveh Jalali
This adds the const qualifier to inputs of marshalling functions as they are intended to be read-only. Change-Id: I099bf46c928733aff2c1d1c134deec35da6309ba Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-21mb/razer/blade_stealth_kbl: 2/3 Exclude fields to match PAD_CFGMaxim Polyakov
This patch excludes bit fields that must be ignored (1,2) in order to convert current macros to target PAD_CFG_*() macros. The following commands were used for this: ./intelp2m -fld cb -ign -t 1 -file ../../src/mainboard/razer/ blade_stealth_kbl/gpio.h - ignore RO bit fields; - ignore RX Level/Edge Configuration (bit 26:25) and RX/TX Buffer Disable (bit 9:8) for the native function, because it does not affect the pad in this mode. This is part of the patch set "mb/razer/blade_stealth_kbl/gpio: Rewrite pad config using intelp2m": CB:43857 - 1/3 Decode raw register values CB:43858 - 2/3 Exclude fields for PAD_CFG CB:43411 - 3/3 Convert field macros to PAD_CFG Change-Id: Ia36c5d0cd449a32d76351a87a33a55196ae78443 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43858 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Mimoja <coreboot@mimoja.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21mb/razer/blade_stealth_kbl: 1/3 Decode raw register valuesMaxim Polyakov
Use the intelp2m utility [1,2] with -adv options to convert the pad configuration format with the raw values of the DW0 and DW1 registers to the format with the bit fields macros: PAD_FUNC(), PAD_RESET(), PAD_TRIG(), PAD_BUF(), PAD_PULL(), etc... ./intelp2m -fld cb -t 1 -file ../../src/mainboard/razer/ blade_stealth_kbl/gpio.h This is part of the patch set "mb/razer/blade_stealth_kbl/gpio: Rewrite pad config using intelp2m": CB:43857 - 1/3 Decode raw register values CB:43858 - 2/3 Exclude fields for PAD_CFG CB:43411 - 3/3 Convert field macros to PAD_CFG Tested with BUILD_TIMELESS=1, Razer Blade Stealth, remains identical. [1] https://github.com/maxpoliak/pch-pads-parser [2] https://review.coreboot.org/c/coreboot/+/35643 Change-Id: I7c4a29f87b56c5ec7e4b74274ae677c4c08c2e8c Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Mimoja <coreboot@mimoja.de>
2020-09-21mb/51nb/x210/gpio: 1/4 Decode raw register valuesMaxim Polyakov
Use the intelp2m utility [1,2] with -fld=cb options to convert the pad configuration format with the raw values of the DW0 and DW1 registers to the format with the bit fields macros: PAD_FUNC(), PAD_RESET(), PAD_TRIG(), PAD_BUF(), PAD_PULL(), etc... ./intelp2m -fld cb -t 1 -file ../../src/mainboard/51nb/x210/gpio.h This is part of the patch set "mb/51nb/x210/gpio: Rewrite pad config using intelp2m": CB:43566 - 1/4 Decode raw register values CB:43567 - 2/4 Exclude fields for PAD_CFG CB:43568 - 3/4 Fixes PAD_RESET to convert to PAD_NC() CB:43410 - 4/4 Convert field macros to PAD_CFG Tested with BUILD_TIMELESS=1, 51NB-X210, remains identical. [1] https://github.com/maxpoliak/pch-pads-parser [2] https://review.coreboot.org/c/coreboot/+/35643 Change-Id: I19282c985cf35a9f99be449915aa9bab7e03472d Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43566 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21util/intelp2m: Check keywords in common codeMaxim Polyakov
TEST = ./intelp2m -n -file inteltool.log; ./intelp2m -fld cb -file inteltool.log; ./intelp2m -fld fsp -file inteltool.log; ./intelp2m -fld raw -file inteltool.log. Before and after the patch, gpio.h is no different. Change-Id: I8af28960e41fcb97f03fe97c42cdddde07b3615a Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45167 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-21volteer: set GSPI CS to deasserted by defaultCaveh Jalali
This sets the state of GSPI chip select to 1 (deasserted) as applied by the FSP during the silicon init phase. GSPI 0 and 1 are set to CS mode manual in the SerialIoGSpiCsMode section which means we need to explicitly configure CS to deasserted in the SerialIoGSpiCsState section. GSPI0 is the CR50 and GSPI1 is the fingerprint sensor. We were running into problems where the normal expected CS toggle sequence to wake up CR50 did not work because CS was already asserted when it was expected to be deasserted, leading to TPM timeouts. BUG=b:168090038 TEST=booted on volteer, no more "TPM flow control failure" messages; verified fingerprint enrollment still works. Change-Id: I47aa5db429d75e66095d58a1eb77963dcfc3b9f3 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45384 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21mb/google/volteer: Add firmware configuration for MAX98373_ALC5682I_I2S_UP4Frank Wu
Add MAX98373_ALC5682I_I2S_UP4 firmware configuration option and configure GPIOs properly for UP4 design. The design is also for Halvor. BUG=b:153680359, b:163382106 TEST=FW_NAME=halvor emerge-volteer coreboot chromeos-bootimage, fw_config value in Halvor: > AUDIO=MAX98373_ALC5682I_I2S_UP4 ectool cbi set 6 0x00000400 4 2 Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: Ie25f278dfbdc2f41a36b70403699a2e3c2234600 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-21soc/intel/xeon_sp: Enable PMC supportRocky Phagura
PMC support was not enabled on Xeon_sp platforms. This involves turning on SOC_INTEL_COMMON_BLOCK_PMC and then adding the proper hooks in SOC specific code. This patch leverages code from the Skylake project and adds the bare minimum hooks to leverage PMC common code. Most importantly this enables power management registers located in the PMC device (under ACPI_BASE_ADDRESS). Access to this device is also needed for SMM setup and handling. TEST=build for Tiogapass and enable the following Kconfig options: select SOC_INTEL_COMMON_BLOCK_PMC select ACPI_INTEL_HARDWARE_SLEEP_VALUES select CPU_INTEL_COMMON_SMM Boot the system and ensure pmbase is programmed. (Look for pmbase in debug messages). Secondly check that SMIs are enabled by looking at the debug messages (search for "Enabling SMIs") and verifying in HW by reading IO port 0x530. Change-Id: I6d57a8282a8b6dc4314f156c39deb09535575cbd Signed-off-by: Rocky Phagura <rphagura@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-09-21soc/intel/xeon_sp/cpx: search IIO_UDS HOB once when creating DMAR tableJonathan Zhang
IIO_UDS HOB was searched several times during the creation of DMAR table. Reduce it to only once to improve boot time. Both DRHD and ATSR subtable creations involve addition of PCIe bridge device entries, combine the functions with acpi_create_dmar_ds_pci_br_for_port(). When looping through ports to create PCIe bridge device entries, use MAX_PORTS intead of NUMBER_PORTS_PER_SOCKET to improve boot time. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I469cd8473c50e105daeda6c5607592ae7cef6032 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45376 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-09-21soc/intel/xeon_sp/cpx: remove DMAR_X2APIC_OPT_OUT flagJonathan Zhang
CPX-SP processor supports X2APIC. Remove DMAR_X2APIC_OPT_OUT flag from DMAR table. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I63c9feda74c7abb591eac991cb98cdcad8afc158 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45375 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21nb/intel/ironlake: Clean up cosmetics of early ME functionsAngel Pons
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical. Change-Id: Ic766345b58c59f3d3c3570741c0eb0ad4e53ed79 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-09-21nb/intel/ironlake: Clean up `send_heci_uma_message` signatureAngel Pons
The only raminfo field it needs is `memory_reserved_for_heci_mb`. So, pass in that value directly. As it's read-only, make it const as well. Change-Id: Ib5d4604e6c1c9bc77df9adfead93b6028d536a3d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45365 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21nb/intel/ironlake: Reduce the scope of `heci_uma_addr`Angel Pons
There's no need to have it in raminfo. Also, bump MRC_CACHE_VERSION. Change-Id: Ida48ec4f50c880fe48d88d016acd3737a0650f80 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45364 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21nb/intel/sandybridge: Drop unnecessary `gma.h`Angel Pons
It only contains prototypes for the long-gone native graphics init. Tested with BUILD_TIMELESS=1, Lenovo ThinkPad X230 remains identical. Change-Id: I9413abb8e49496ada60dcdf801a1f8a03be38d2e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45360 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21nb/intel/sandybridge: Put DMIBAR/EPBAR registers into separate filesAngel Pons
Tested with BUILD_TIMELESS=1, Lenovo ThinkPad X230 remains identical. Change-Id: I836df4675f4886635973c0c75f5981c9ef17d84b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45359 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21nb/intel/sandybridge: Move register headers into a subfolderAngel Pons
Move all files with register definitions into a `registers` subfolder. Subsequent commits will move the remaining registers into this folder. Tested with BUILD_TIMELESS=1, Lenovo ThinkPad X230 remains identical. Change-Id: Ie525e755f32599db97af7969fc7fbb36a5d826b6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45358 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21nb/intel/sandybridge: Clean up DMIBAR/EPBAR registersAngel Pons
Several registers have been copy-pasted from i945 and do not exist on Sandy Bridge. Moreover, other register definitions were missing. Use the newly-added definitions in existing code, in place of numerical offsets. Tested with BUILD_TIMELESS=1, Lenovo ThinkPad X230 remains identical. Change-Id: I9ad849f57bc68256a2a87ffdc856c4b521e35892 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45357 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21nb/intel/sandybridge: Introduce memmap.hAngel Pons
Move all memory map definitions into a separate header. Tested with BUILD_TIMELESS=1, Lenovo ThinkPad X230 remains identical. Change-Id: I7f2ff2a5cee8bf12e5dca74ff9f0b1a44e26cded Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45356 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21mb/google/volteer: fw_config: Add fields for keyboard featuresDuncan Laurie
Add newly defined fields for presence of keyboard backlight and number pad to the firmware configuration table. We don't have a need to use these in coreboot (yet) but this keeps the bit definitions in sync. BUG=b:166707536 TEST=abuild -t google/volteer Change-Id: I066e445f7d0be056e45737d2c538be1850ae85aa Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45346 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-21soc/intel/jsl: Use the common code to set the PchPmPwrCycDurV Sowmya
This patch uses the common code to avoid violating the PCH EDS recommendation for the PchPmPwrCycDur setting. Change-Id: I8aba558082ff5bbe2c5b12e0e623c013548e6481 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45030 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21soc/intel/cnl: Use the common code to set the PchPmPwrCycDurV Sowmya
This patch uses the common code to avoid violating the PCH EDS recommendation for the PchPmPwrCycDur setting. Change-Id: Id418480bc779d56ff5586516d9bd99ca15133203 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45029 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21Documentation: Add ASan documentationHarshit Sharma
Change-Id: I710ea495798597189941620c7e48fd5aa7476781 Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-09-20mb/system76/lemp9: move LPC options to the devicetreeMichael Niewöhner
Change-Id: I7b7acdc51c848541fb39926bc8de1115c026dd05 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45496 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-20mb/system76/lemp9: correct CBFS_SIZEMichael Niewöhner
The BIOS region size is 0xc00000, not 0xa00000. Correct this. Change-Id: I88cb0d4b9a590a32672054aa0db7f9a92070ff6d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45504 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-09-20mb/system76/lemp9: enable SATA ALPM capabilityMichael Niewöhner
Enable SATA Link Power Management capability to be able to save power. TEST: /sys/class/scsi_host/host*/link_power_management_policy exists. Change-Id: I88de28cfb266af3fcd6e498a08a24b46c992cb9d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45492 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-20mb/system76/lemp9: drop disabled options from devicetreeMichael Niewöhner
Drop all options with zero-value, since they already default to 0. Change-Id: I2a1a91778e83dc49c6dcf2d518cd3591f7ec4cfa Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45491 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-20mb/google/zork: update morphius dptc clamshell/tablet mode settingKevin Chiu
clamshell/tablet: Slow_ppt_limit(W) 20 Fast_ppt_limit(W) 24 Slow_ppt_time_constant 5 Stapm_time_constant 200 Sustained_power_limit(W) 12 clamshell: Temperature limit(C') 100 tablet: Temperature limit(C') 70 BUG=b:157943445 BRANCH=zork TEST=1. emerge-zork coreboot 2. change mode and check "thermctl_limit" will change Change-Id: I1eda1411766e446b673046236f7cc4015696521f Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45520 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-20soc/amd/picasso: Add THERMCTL_LIMIT DPTC parameter supportKevin Chiu
Add THERMCTL_LIMIT (die temperature limit) DPTC parameter for clamshell/tablet mode. BUG=b:157943445 BRANCH=zork TEST=build Change-Id: Id193a74210c92d1e45ed4824ee9c0fc9ceaa5e3a Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-20lint: check for misuse of Kconfig SUBSYSTEM_*_IDMichael Niewöhner
Check that nobody misuses the Kconfigs SUBSYSTEM_*_ID. They are meant to be used for overriding the devicetree subsystem ids locally but shall not be added to a board's Kconfig. Instead, the devicetree option `subsystemid` should be used. Add a linter script for this that finds and warns about such misuse. Also add a note in the Kconfigs' description. TEST=CB:45513 Change-Id: I21c021c718154f1396f795a555af47a76d6efe03 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45513 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-20soc/amd/picasso: Fix typo of Kconfig settingZheng Bao
USE_PSPSCUREOS -> USE_PSPSECUREOS. Change-Id: I5c89975cc317cb93e79509e885010d14a79dd7e1 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45285 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-09-19mb/system76/lemp9: move subsystem id from Kconfig to devicetreeMichael Niewöhner
Change-Id: I21e7e53787b115f50093d7caa72285ce480cef52 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-19mb/up/squared: move subsystem id from Kconfig to devicetreeMichael Niewöhner
Change-Id: Icf62a73ee568d9369c53bd767bd4cfb736ea76f1 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-19soc/intel/common/block/cse: Refactor cse_request_global_reset() functionSubrata Banik
List of changes: 1. Check if CSE is enabled from devicetree.cb 2. Create helper function cse_request_reset() 3. Modify caller function argument cse_request_global_reset() Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I3668b473bec8d51f847908d11e2e25c485ec7a97 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45341 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-19apollolake boards: Enable CSE in devicetreeSubrata Banik
Enable CSE PCI device Bus 0: Device 0x0f: Function 0x00 to let Intel common cse block code can use this device. Calling me_read_config32(offset) function from ramstage: Without this CL : HECI: Global Reset(Type:1) Command BUG: me_read_config32 requests hidden 00:0f.0 PCI: dev is NULL! With this CL : HECI: Global Reset(Type:1) Command HECI: Global Reset success! Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I97d221ae52b4b03ecd859d708847ad77fe4bf465 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-19libpayload: free: Separate NULL check out for clarityHsuan Ting Chen
Separate the validity check of calling free(NULL) for clarity. BUG=b:168441735 TEST=emerge-puff libpayload Change-Id: I0dc355553410bbe59e658945fb40c05f5f709380 Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-09-18sconfig: Add function for parse+override of treeDuncan Laurie
Extract the steps to parse and override a devicetree into a function so it can be used multiple times without copying the same logic. Change-Id: I4e496a223757beb22e3bd678eb6115968bd32529 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-09-18trogdor: Move EN_PP3300_DX_EDP for CoachzJulius Werner
This patch updates the display power enable GPIO which moved from 30 to 52 for Coachz. Veterans of this project know that there's no point trying to ask *why* this change was necessary -- the pins move in mysterious ways and all we can do is watch and wonder. Pin 30 is now used for a new camera reset GPIO... surely, there must have been some excellent reason why that pin couldn't just have become pin 52 instead. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I00ad6a6249df66006b4f2b953a0a2449bd478f6d Reviewed-on: https://review.coreboot.org/c/coreboot/+/45306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Philip Chen <philipchen@google.com>
2020-09-18sconfig: Switch to getoptDuncan Laurie
Instead of positional arguments switch sconfig to use getopt and pass the arguments as options in the build system. This will make it easier to add additional options. Change-Id: I431633781e80362e086c000b7108191b5b01aa9d Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-18mb/google/octopus/variants/fleex: support LTE power sequenceEric Lai
GPIOs related to power sequence are GPIO_67 - EN_PP3300 GPIO_117 - FULL_CARD_POWER_ON_OFF GPIO_161 - PLT_RST_LTE_L 1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161 2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67 3. Power reset: - keep GPIO_67 and GPIO_117 high and - pull down GPIO_161 for 30ms then release it. BUG=b:168075958 BRANCH=octopus TEST=build image and verify on the DUT with LTE DB. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I9b56ef8ff346c1d4edd5aad04d4a7396c4702ffc Reviewed-on: https://review.coreboot.org/c/coreboot/+/45193 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-18mb/google/volteer: Remove redundant GPIO decls in EldridTim Wawrzynczak
GPP_A19 and GPP_A20 are already declared as NC in the baseboard. Change-Id: I02f5751a70b51a197320b865d18da3a4ffeb87f7 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45485 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-18drivers/genesyslogic/gl9755: Add driver for Genesys Logic GL9755Ben Chuang
The device is a PCIe Gen2 to SD 4.0 card reader controller to be used in the Chromebook. The datasheet name is GL9755S and the revision is 05. The patch sets LTR value. Signed-off-by: Ben Chuang <benchuanggli@gmail.com> Change-Id: I16048dde348be248c748d50ca4a8a62c8a781430 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45062 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-18mb/google/volteer/eldrid: Add option to enable WiFi SAR configsMalik_Hsu
This change adds a user selectable option to enable all WiFi SAR configs that apply to volteer BUG=b:168169690 TEST=1. cros-workon-volteer start coreboot-private-files-baseboard-volteer 2. USE="project_eldrid" emerge-volteer chromeos-config coreboot-private-files-baseboard-volteer 3. check wifi_sar-eldrid.hex in coreboot-private/3rdparty/blobs/baseboard-volteer Change-Id: I6b74cd2b34ebb99cc59d456e28fd7ab2399d71d0 Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45233 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-18util/rockchip: Port make_idb.py to python3Yilin Yang
BUG=chromium:1023662 TEST=buildbot pass TEST=1. Use python2 script 2. Run `emerge-kevin coreboot` twice, so we get bootblock.bin.1 and bootblock.bin.2 3. Run `xxd` on these two bootblock so we get bootblock.bin.1.hex and bootblock.bin.2.hex 4. `diff bootblock.bin.1.hex bootblock.bin.2.hex` and record the difference. (at least, the time info changes) 5. Migrate to python3 6. Similar steps, we get bootblock.bin.py3.hex 7. `diff bootblock.bin.1.hex bootblock.bin.py3.hex`, the difference is similar. (time info, git hash changes) Signed-off-by: Yilin Yang <kerker@google.com> Change-Id: I04253084ec9b65310c52598b629390051cd2172b Reviewed-on: https://review.coreboot.org/c/coreboot/+/45447 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-18superio/nuvoton: Inline `nuvoton_hwm_select_bank`Angel Pons
There's no need to place a single-line function in its own compilation unit, and then guard it behind a Kconfig symbol. This also allows using this function in stages other than ramstage. Change-Id: I103a4ea4cef24844d382854c9358bbb37d229e04 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42130 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-18src/include: Add PnP/HWM unset_and_set functionsAngel Pons
RMW (read/modify/write) ops on PnP devices has never been so simple. The semantics also allow the compiler to emit valid warnings if the input parameters would overflow, which are silenced when the cast is placed outside of the function. Change-Id: Ica01211af2a9a00aed98880844a836f6b7957b14 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42134 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-18util/exynos: Port *_cksum.py to python3Yilin Yang
BUG=chromium:1023662 TEST=1. Create a tiny file `in.txt` as input 2. Run `fixed_cksum.py in.txt out.txt 20` with py2 and py3 version, the output is the same 3. Run `variable_cksum.py in.txt out.txt` with py2 and py3 version, the output is the same Signed-off-by: Yilin Yang <kerker@google.com> Change-Id: I9428269dfb826a3a95fffef9ea3f7c1a7107ef84 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45460 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-09-18util/mtkheader: Port gen-bl-img.py to python3Yilin Yang
BUG=chromium:1023662 TEST=1. Use python2 script 2. Run `emerge-asurada coreboot` twice, so we get bootblock.bin.1 and bootblock.bin.2 3. Run `xxd` on these two bootblock so we get bootblock.bin.1.hex and bootblock.bin.2.hex 4. `diff bootblock.bin.1.hex bootblock.bin.2.hex` and record the difference. (at least, the time info changes) 5. Migrate to python3 6. Similar steps, we get bootblock.bin.py3.hex 7. `diff bootblock.bin.1.hex bootblock.bin.py3.hex`, the difference is similar. Signed-off-by: Yilin Yang <kerker@google.com> Change-Id: I788e7c9b09257142728a0f76df8c2ccc72bf6b3b Reviewed-on: https://review.coreboot.org/c/coreboot/+/45440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-09-18libpayload: cbgfx: Fix 'equals' counter for Lanczos resamplingYu-Ping Wu
The current initialization of the 'equals' counter is incorrect, so that when 'equals >= SSZ * SSZ', the pixels in the sample array might not be all the same, leading to a wrong pixel value being set in the framebuffer. The 'equals' counter stores the number of latest pixels that were exactly equal. Within the for loop of 'ox', the sample array is updated in a column-based order, and the 'equals' counter is updated accordingly. However, the 'equals' counter is initialized in a row-based order, which causes it to be set too large than it should be. Consider the example where sample[sx][sy] are initially: [X X X A A A] // sy = 0 [X X X B B B] [X X X B B B] [X X X B B B] [X X X B B B] [X X X B B B] // sy = SSZ Then, the correct implementation will initialize 'equals' to be 15, with last_equal being B. Suppose all of the remaining pixels are B. Then, at the end of the 'while (fpfloor(ixfp) > ix)' loop when ix = 4, or equivalently after 4 more columns of sample are updated, 'equals' will be 15 + 6 * 4 = 39, which is greater than SSZ * SSZ = 36, but we can see there are still 2 A's in the sample: [B B B B A A] [B B B B B B] [B B B B B B] [B B B B B B] [B B B B B B] [B B B B B B] Therefore, we must also initialize the 'equals' counter in a column-based order. BUG=b:167739127 TEST=emerge-puff libpayload TEST=Character 'k' is rendered correctly on puff BRANCH=zork Change-Id: Ibc91ad1af85adcf093eff40797cd54f32f57111d Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45235 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-17soc/intel/cannonlake: add missing special function padsMichael Niewöhner
The following parameters do nothing else than configuring the corresponding pads to native mode: - DdiPortEdp - DdiPort*Hpd - DdiPort*Ddc - GpioDdp* - SpiGpioAssign - I2c*GpioAssign - SerialIoUartDebugEnable - Gp*GpioAssign - Uart*GpioAssign - GpioEnableHdaLink - AudioLinkDmic* - AudioLinkSsp* - GpioEnableHdaSspMasterClock - AudioLinkSndw* - SmbAlertEnable Add the missing special function gpio pad groups for CNL, to be able to configure them via gpio.h instead having to set various FSP parameters. The groups and names are documented in the PCH EDS, in Linux (linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places. Also, see soc/intel/tigerlake for reference. Change-Id: Ia3bc1df1a14dbca7c7213577cb2d5b98bb0acf64 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-09-17mb/system76/lemp9: update power limitsJeremy Soller
Tested on lemp9, power limits are adjusted from the previously low values to the values the thermal system can handle. This was determined by increasing the values and running the system at 100% CPU utilization until thermal throttling occured and the chassis temperature became uncomfortable. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: I5e176e9d98376f8e2dc415e4397efc456869e72d Reviewed-on: https://review.coreboot.org/c/coreboot/+/43624 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17mb/system76/lemp9: disable PCH DMIC, which is not wiredMichael Niewöhner
The microphone is wired to the audio codec, not to the PCH. Disable the DMIC interface. Change-Id: I4128a694c1a66d3c2c2d1cb831fcca3487160f8f Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45133 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17soc/intel/cannonlake: rename "RSVD" GPIOs to their correct namesMichael Niewöhner
The names of the GPIO_RSVD_* are documented in the PCH EDS, in Linux (linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places. Also, see soc/intel/tigerlake for reference. Change-Id: I59df09c8fd464e75f918455aa1972765abc51459 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-09-17mb/system76/lemp9: skip FSP init of UART2Jeremy Soller
This UART is already initialized by coreboot for the console, it does not need to be initialized by the FSP. Tested on lemp9. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: I7c299fd7cf6fe53d1f500a899a14e63e51ad6266 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-17nb/intel/haswell: Put DMIBAR/EPBAR registers into separate filesAngel Pons
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: Ib68d8b88b0d79cb33d42f9e21cfb0e57abae75e8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45355 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/haswell: Move register headers into a subfolderAngel Pons
Move all files with register definitions into a `registers` subfolder. Subsequent commits will move the remaining registers into this folder. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I143b3c829be44a39e14902255cd4bb13bf02f0c1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45354 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/x4x: Clean up TPM-related codeAngel Pons
Perform the read to the TPM base address using <arch/mmio.h> functions. Remove dead variable assignment and rename TPM base address macro. Tested with BUILD_TIMELESS=1. Asus P5QL PRO remains identical. Change-Id: I11d737903c57fce768b760fe717564dae8879ad0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-09-17nb/intel/pineview: Guard DMIBAR/EPBAR macro parametersAngel Pons
Add brackets around the parameters to avoid operation order problems. Tested with BUILD_TIMELESS=1, Foxconn D41S remains identical. Change-Id: I347466f56d3d5fb3793b3a25e4a825c844e50d42 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45386 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-09-17nb/intel/pineview/iomap.h: Rename to memmap.hAngel Pons
It primarily contains definitions for MMIO windows. Change-Id: I8cd639c8c7d400a5bfd73735113dd27dd6f948e6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-09-17nb/intel/ironlake: Do not re-read ME UMA sizeAngel Pons
It has been read twice already, so don't read it a third time. Change-Id: I56ec3a10246f6ebe8074e7b8c164bda6b90eee87 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45363 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-09-17nb/intel/ironlake: Drop some unused function parametersAngel Pons
Some of the HECI functions do not need raminfo at all. Change-Id: If0720fa87e5e18820db77a1b61bcdb42ecc538fb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-09-17nb/intel/ironlake: Drop `heci_bar` field from raminitAngel Pons
This field is only written to, never read. Drop it from raminfo. Also, bump MRC_CACHE_VERSION as the saved data layout has changed. Change-Id: I83d6e69addff996e2f18472d3e1d4f7b9ba974fd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45361 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-09-17nb/intel/haswell: Clean up register definitionsAngel Pons
Several registers have been copy-pasted from i945 and do not exist on Haswell. Moreover, other register definitions were missing. Although most of them are unused, native platform init may eventually use them. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I6b3a47b2af406da6b030d417f14a2f4d394aa9c8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45353 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/haswell: Guard DMIBAR/EPBAR macro parametersAngel Pons
Add brackets around the parameters to avoid operation order problems. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I5e1a02ba2ebf468f0d80b7f1838766280b6b7b22 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45352 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/haswell: Introduce memmap.hAngel Pons
Move all memory map definitions into a separate header. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: Ib275f9ad8ca9ff343604c9e8cbb130c74ddad54f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45351 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/sandybridge: Drop `void *` cast in `MCHBAR32`Angel Pons
This changes the binary for the native raminit code path. Tested on Asus P8Z77-V LX2, still boots with native raminit. Change-Id: Ie8f1205a64e5264cb909d67c1dd402c18a6241ad Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45350 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17Update amd_blobs submodule to upstream masterMatt Papageorge
Updating from commit id 3bd9078: 2020-08-12 17:03:38 -0600 - (picasso: Update PSP to 0.8.6.7B) to commit id e393a88: 2020-09-16 14:32:50 +0000 - (Update SMU firmware for Picasso, Pollock and Dali) This brings in 1 new commits. Change-Id: I1e317cf6ef4803577e9b353fb3313d001db228d7 Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45455 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/sandybridge: Drop casts from DEFAULT_{MCHBAR,DMIBAR}Angel Pons
This allows us to drop some casts to uintptr_t around the tree. The MCHBAR32 macro still needs a cast to preserve reproducibility. Only the native raminit path needs the cast, the MRC path does not. Tested with BUILD_TIMELESS=1, these boards remain identical: - Lenovo ThinkPad X230 - Dell OptiPlex 9010 - Roda RW11 (with MRC raminit) Change-Id: I8ca1c35e2c1f1b4f0d83bd7bb080b8667dbe3cb3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45349 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/sandybridge: Drop invalid `DEFAULT_RCBABASE` macroAngel Pons
RCBA is located in the PCH. Replace all instances with the already-defined `DEFAULT_RCBA` macro, which is equivalent. Change-Id: I4b92737820b126d32da09b69e09675464aa22e31 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45348 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17nb/intel/ironlake: Drop invalid `DEFAULT_RCBABASE` macroAngel Pons
This macro is unused, and RCBA is located in the PCH. Drop it. Change-Id: Id7c095496360bbe96dc2a36dcc557a1481c02c31 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45347 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17mb/system76/lemp9: move HDA options into devicetreeMichael Niewöhner
Change-Id: Id4fc12896f89739d0ee2a47a42173693921da14e Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45132 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17mb/volteer: Select USE_CAR_NEM_ENHANCED_V2 for Tigerlake QS basedShreesh Chhabbi
platforms BUG=b:145958015 TEST= Build Volteer coreboot and boot on Volteer Proto 2 and Delbin. Cq-Depend:chrome-internal-review:3249528 Change-Id: I0ff896424ab23dba43075c44eb9b2c2c480ccbfb Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-09-17mb/google/volteer/variants/eldrid: Configure DP_HPD as PAD_NCnick_xr_chen
GPP_A19(DP_HPD1) and GPP_A20(DP_HPD2) were configured native function (NF1) without internal pull-down which wrongly presents HPD interrupts. This change configures GPP_A19 and GPP_A20 to be no connection and disables DdiPort1Hpd and DdiPort2Hpd. BUG=b:165893624, b:168090618 Signed-off-by: nick_xr_chen <nick_xr_chen@wistron.corp-partner.google.com> Change-Id: I31b25be1c9248debf855435c7b688b358e2cd57e Reviewed-on: https://review.coreboot.org/c/coreboot/+/45246 Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17src: Remove redundant <device/pnp_type.h>Elyes HAOUAS
When <device/pnp.h> is needed, it is supposed to provide <device/pnp_type.h>. Change-Id: I0e479e2abdb6cfb8633840db2222ce5397fe7d55 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45403 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17src: Remove redundant <device/pnp_def.h>Elyes HAOUAS
When <device/pnp.h> is needed, it is supposed to provide <device/pnp_def.h>. So remove redundant <device/pnp_def.h> includes. I'll remove also <device/pnp_type.h> in a separate patch. Change-Id: Ib9903ae456c32db4ba346020659c17c27a939e89 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45316 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-09-17soc/amd/picasso: Clean up legacy UART configRob Barnes
Clean up configuration of the legacy UART and add Kconfig options for the mapping between UART and legacy I/O decode. BUG=b:143283592 BUG=b:153675918 TEST=Linux detects an additional legacy serial port for each active MMIO one if PICASSO_UART_LEGACY is selected. BRANCH=zork Signed-off-by: Rob Barnes <robbarnes@google.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id08ff6428d4019303ebb6e44e13aba480cf1fde2 Reviewed-on: https://chromium-review.googlesource.com/2037891 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40322 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-09-17soc/intel/cannonlake: fix GPIO community numbering in ACPIMichael Niewöhner
This corrects the GPIO community numbers in CNL-LP ACPI code. Change-Id: I9f13a28d3e8f427859570a4d209304ae8444efd9 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45209 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17soc/intel/common/block/chip: Refactor chip_get_common_soc_structure()Subrata Banik
Found-by: Klocwork, Pointer soc_config is used uninitialized. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I7e2aa4ef23a68a2ec2ba9d55cf890a7f81e3e278 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-17soc/intel/common/block: Add NULL check for 'ctx' pointerSubrata Banik
Found-by: Klocwork, Avoid NULL pointer (ctx) dereference. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I16015b538112e0b125b4a5e145c26263c456953c Reviewed-on: https://review.coreboot.org/c/coreboot/+/45411 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17soc/mediatek/mt8192: Init PLL in bootblockCK Hu
Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: If16d244e07d9f369efd991132587a92e38200b45 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-09-17soc/mediatek/mt8192: Add mtcmos init supportWeiyi Lu
Using common mtcmos code to power on audio and display modules in SOC. TEST=Boots correctly on MT8192EVB. Passes the status check at the end of mtcmos_power_on() Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Change-Id: Ie7bff831eecfc2b4d315a577f6ff86befc483eab Reviewed-on: https://review.coreboot.org/c/coreboot/+/45394 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17mb/google/zork: Add dptc interface support for morphiusChris Wang
Add dptc interface in devicetree for morphius. Set the STAPM parameters for tablet mode: dptc_enable = 1 dptc_fast_ppt_limit = 24000 dptc_slow_ppt_limit = 20000 dptc_sustained_power_limit = 6000 BUG=b:157943445 BRANCH=zork TEST=Build. check the setting changed. Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I4dac4b7e5157ad7ad407f42a6fc6b06eefbf3291 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45153 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-17ec/google/chromeec: Add dptc interface supportChris Wang
add the dptc interface support when system in tablet mode. In some FP5/FT5 platform, which will have different power or thermal parameters depends on different form factor. BUG=b:157943445 BRANCH=Zork TEST=Build. check the setting changed. Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I2be7942132cea474237f531021ad4fd9856b5050 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44265 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17soc/amd/picasso: add dptc supportChris Wang
add dptc support for different power parameter on tablet/clamshell mode The BIOS may choose to adjust power and/or thermal parameters at its own discretion. The DPTC interface(DPTCi) ALIB Function adds flexibility by allowing the BIOS to request power state changes independently of specific events. BUG=b:157943445 BRANCH=none TEST=Build.Generated ASL code from SSDT by acipgen_dptci().check the setting changed. Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: Icae94103f254f8fdb84e6ee0f5404fb09fa97b2d Reviewed-on: https://review.coreboot.org/c/coreboot/+/43408 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-16soc/intel/common/block: Do not die if PRMRR size unsupportedAngel Pons
If a given PRMRR size is not supported, do NOT brick people's devices. We don't do that when PRMRRs aren't even supported anyway. Change-Id: Ib917be873aedbc5e789bb0894fca335b5ee9e2c2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45373 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2020-09-16region_file_update_data_arr: Modify region_file with array of buffersShelley Chen
Add region_file_update_data_arr, which has the same functionality as region_file_update_data, but accepts mutliple data buffers. This is useful for when we have the mrc_metadata and data in non-contiguous addresses, which is the case when we bypass the storing of mrc_cache data into the cbmem. BUG=b:150502246 BRANCH=None TEST=reboot from ec console. Make sure memory training happens. reboot from ec console. Make sure that we don't do training again. Change-Id: Ia530f7d428b9b07ce3a73e348016038d9daf4c15 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45407 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-16soc/amd/picasso/data_fabric: make register number parameter unsignedFelix Held
The register number is always non-negative, so it should be an unsigned type. Change-Id: I6b6df5a41fe58efc53eaa87c01b88426ea8daa6e Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-16soc/amd/picasso/data_fabric: include types.hFelix Held
data_fabric.c uses types from stdint.h, but doesn't include stdint.h directly, so replace the inclusion of stdbool.h with types.h which includes both stdbool.h and stdint.h. Change-Id: I4c1ea444e50218cf19fc8fff499929336265bd03 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 13:39:32 +0000