summaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2010-09-01Add support for dumping GPIOS on Intel ICH10R. This information comes from th...Warren Turkal
2010-08-31SMC_CONFIG is needed before the device tree is ready and some peopleJens Rottmann
2010-08-31Make ALIX.2D3 support 2D2 as well.Jens Rottmann
2010-08-31Get Byte65/66 for register manufacture ID code. RegMan1Present willZheng Bao
2010-08-30Make yabel work for non-zero bus numbers. The link_num is not the bus number.Myles Watson
2010-08-30We call this cache as ram everywhere, so let's call it the same in KconfigStefan Reinauer
2010-08-30Fix intel mtarvon compilation by switching it over to CAR.Stefan Reinauer
2010-08-30Restructured all vendors' Kconfig files to no longer source the boards'Jens Rottmann
2010-08-30This file was missing from r5751.Andreas Schultz
2010-08-30Support for Lanner EM-8510 BoardAndreas Schultz
2010-08-30Rework i855GM/i855GME supportAndreas Schultz
2010-08-30mPGA479M Sockets can take Intel Mobile Celeron.Andreas Schultz
2010-08-30Multi-DIMMS on AMD ddr2 MCT channel B fixed.Kerry She
2010-08-30Multi-DIMMS on AMD ddr3 MCT channel B works.Kerry She
2010-08-30Trivial syntax correction of AMD mct_ddr3 dir.Kerry She
2010-08-28fix compilation of hello.elf example payload.Stefan Reinauer
2010-08-27drop three unneeded config variables:Jens Rottmann
2010-08-26Remove unused mainboard_config definitions. Trivial.Myles Watson
2010-08-26CONFIG_DEBUG_RAM_SETUP and CONFIG_DEBUG_SMBUS are only available if the board /Jens Rottmann
2010-08-26One of my boards needs this mini delay in order to survive ram initialization.Stefan Reinauer
2010-08-26kontron 986lcd-m: Fix compilation if there is no oprom execution at all...Stefan Reinauer
2010-08-25Fix i945 based boardsStefan Reinauer
2010-08-24* Adds support for PC Engines Alix.2D(1)3 board to Coreboot.Aurelien Guillaume
2010-08-23mark unused variables in x86emu as unused. gcc has a mechanism for this.Stefan Reinauer
2010-08-22Fix up some copyrightsWang Qing Pei
2010-08-22I've checked Revision Guide for AMD Family10h processors (#41322) revXavi Drudis Ferran
2010-08-22RB_C3 should also apply the workaround for errata 354, according toXavi Drudis Ferran
2010-08-22RB_C3 and HY-D0 should also apply the workaround for errata 344, according toXavi Drudis Ferran
2010-08-22documented workaround erratum 414, seeXavi Drudis Ferran
2010-08-22documented workaround erratum 372, seeXavi Drudis Ferran
2010-08-22Complete code for errata 343. Revision Guide for AMD Family10hXavi Drudis Ferran
2010-08-22Include RB_C3 in erratum 346Xavi Drudis Ferran
2010-08-22Add RB_C3 to AMD_FAM10_ALL so that it gets its MSR right for mtrs, ht, etc.Xavi Drudis Ferran
2010-08-22Add suport for normal register dumping on ite8510E/TE/GAnders Juel Jensen
2010-08-22Add another port to find ite8510 on.Anders Juel Jensen
2010-08-22Add support for non LDN register/device naming.Anders Juel Jensen
2010-08-22The LDFLAGS = -lz is needed to compile on slackware.Anders Juel Jensen
2010-08-20Remove a couple of warnings. Trivial.Myles Watson
2010-08-20Add support for the HP DL145 G1, based on the Tyan s2881.Oskar Enoksson
2010-08-18libpayload: fix garbage on screen with Geode-LX VGAJens Rottmann
2010-08-18The attached file add pa78vm5 dev3 detection function to avoid the building e...Wang Qing Pei
2010-08-17Attached patch removes unnecessary IRQ routing info (for ACPI, mptable etc ne...Rudolf Marek
2010-08-17Correct for size_t would be %zx, but coreboot's printf doesn't support this.Jens Rottmann
2010-08-17Commit (non-working!) Jetway PA78VM5 mainboard Wang Qing Pei
2010-08-17Support for Fintek F71863FG. This might need some work on the copyrightWang Qing Pei
2010-08-17image parsing for getpirMarc Bertens
2010-08-17Another AMD 780/700 mainboard: Gigabyte MA78GM-US2HWang Qing Pei
2010-08-17Tilapila supports both dual slot and single slot. The difference should beWang Qing Pei
2010-08-17Add support for Gigabyte MA785GMT mainboard.Wang Qing Pei
2010-08-17fix nokia ip530 Kconfig, missed on last check-inStefan Reinauer
2010-08-17libpayload: Add function to fix CMOS checksum.Stefan Reinauer
2010-08-17Whatever happened here,... The DEC Tulip is a network card, no bridge of anyStefan Reinauer
2010-08-17Add support for the Intel NM10 (a variant of ICH7) and ICH8 southbridges.Corey Osgood
2010-08-17Add support for Fintek F81216D/DG/ADStefan Reinauer
2010-08-17Clarify comment a bitPatrick Georgi
2010-08-17Add support for the Nuvoton NCT5571D. This chip acts nothing like the otherCorey Osgood
2010-08-17Look for actual framebuffer size instead of hardcoding UMARudolf Marek
2010-08-17Fix warnings (that become errors) in AMDHT for certain configurations (unused...Xavi Drudis Ferran
2010-08-17Feature of lane reversal of AMD RS780 is tested.Zheng Bao
2010-08-16White space changes for s2881 device tree.Myles Watson
2010-08-16sconfig parser:Stefan Reinauer
2010-08-16Fix strcmp and strncmp. They failed in several important scenariosPatrick Georgi
2010-08-16Add #define that states the libpci interface version we implementPatrick Georgi
2010-08-16Call mainboard init functions.Myles Watson
2010-08-15Gigabyte dual bios mainboard will always reboot, caused by the superio. Wang Qing Pei
2010-08-14My forgotten CAR cleanup patch...Stefan Reinauer
2010-08-14My old mcp55 azalia fix from May 2010. Was never checked in.Stefan Reinauer
2010-08-14bootblock_prologue.c (not a .c file!) and i386/init/crt0_prologue.inc wereStefan Reinauer
2010-08-14clean up comment in entry32.incStefan Reinauer
2010-08-13Build 8151 for s2885. Trivial.Myles Watson
2010-08-13Add support for OHCI controllers and prelimiary support for xHCI (USB3) contr...Patrick Georgi
2010-08-10Superiotool support for the IT8500 embedded controller.Donald Huang
2010-08-09Some chips do not require enter/exit sequences. This causes them to beDavid Hendricks
2010-08-09make sconfig parser regeneration menu selectableStefan Reinauer
2010-08-09Fix build error introduced in r5868.Patrick Georgi
2010-08-09non-root devices are not supposed to be accessed outside of static.c except byStefan Reinauer
2010-08-05Change default path and configuration for Coreinfo.Myles Watson
2010-08-05The number of cores is got by reading the bit 15,13,12 of [0,24,3,e8].Zheng Bao
2010-08-04Remove warnings from USB debug console code.Myles Watson
2010-08-03Drop the USE_PRINTK_IN_CAR option. It's a bogus decision to make for any user /Stefan Reinauer
2010-08-03VGA code needs to be refactored before it can be compiled conditionally.Myles Watson
2010-08-02Build VGA code conditionally to avoid errors when using SeaBIOS.Myles Watson
2010-08-02Adds id for ITE IT8707F to superiotool.Mattias Mattsson
2010-08-01make early_mtrr_init() invisible for cache as ram targets as it breaks them.Stefan Reinauer
2010-08-01Clarify a comment on an old hack, remove the call to early_mtrr_initCorey Osgood
2010-08-01- fix SMM code relocation raceStefan Reinauer
2010-08-01add i945GSE to inteltoolBjörn Busse
2010-08-01Update my old, no longer active email addressesCorey Osgood
2010-07-29Add support for the Intel Atom D400/500- and N400-series integrated Corey Osgood
2010-07-29Resolved the bug of filo+libpayload building. The bug is if libpayload is ins...Cai Bai Yin
2010-07-28Let Geode GX2 use geode_post_code.h just like Geode LXNils Jacobs
2010-07-27Add src/cpu/amd/model_gx2/cache_as_ram.inc missing from r5669Nils Jacobs
2010-07-26This patch converts the Geode GX2 boards to CAR.Nils Jacobs
2010-07-26Make include paths more consistent. Fixes compilation errors for me.Myles Watson
2010-07-22Superiotool support for Nuvoton WPCE775x/NPCE781x.David Hendricks
2010-07-16Add support for the console over Ethernet (through PCI NE2000).Rudolf Marek
2010-07-15Trivial: Improve error reporting of sconfig slightly by reporting the line nu...Patrick Georgi
2010-07-09become more standard with libpayload headers. PATH_MAX belongs in limits.h,Stefan Reinauer
2010-07-09Trivial -Werror fix.Cristi M
2010-07-09Trivial fix to make CONFIG_BOOTBLOCK_NORMAL switch compile again.Myles Watson
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 21:36:05 +0000