summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-17soc/amd/picasso: Use read-modify-write for ACP_I2S_PIN_CONFIGFurquan Shaikh
This change uses read-modify-write to update ACP_I2S_PIN_CONFIG instead of a write operation since the other bits in the register are reserved. Change-Id: Ic64e1907858ec293c5f759e627d19c00d748a30e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43503 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17mb/google/zork: Enable ACP_PME_EN and ACP_I2S_WAKE_ENFurquan Shaikh
This change enables ACP_PME_EN and ACP_I2S_WAKE_EN for dalboz and trembyle boards using devicetree settings. BUG=b:161328042,b:146317284 Change-Id: Ie367a9ba878a1892177df874bbcb8005efeb0880 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43496 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-17soc/amd/picasso: Configure ACP_PME_EN and ACP_I2S_WAKE_ENAkshu Agrawal
This change adds support for configuring ACP_PME_EN and ACP_I2S_WAKE_EN using the mainboard setting for `acp_pme_enable` and `acp_i2s_wake_enable` in the devicetree. This is required to get I2S_Wake event on headset jack plug/unplug when using CODEC_GPI pad. BUG=b:146317284,b:161328042 Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Change-Id: I522d7497940f499fbc3181d866f2b44e979bba7a Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/1969104 Reviewed-by: Raul E Rangel <rrangel@chromium.org> Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43495 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16soc/amd/picasso: remove unused fadt_pm_profile devicetree settingFelix Held
commit 56da63c3dc3f50cfac541c779b608e1bae9e635c removed overriding that field in the FADT. Change-Id: I0c8ff9ab125129dc856949c47a3a0c14e4109c73 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43417 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16mb/amd/mandolin: add SATA DXIO descriptor for Dali SKUsFelix Held
Dali supports two SATA ports, but no PCIe alternate function on those pins. Change-Id: I27a13100e80565eb1dade2d703ba3d1f8b5f630f Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43493 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-16mb/amd/mandolin: fix DXIO lane numbersFelix Held
The DXIO descriptors use the logical and not the physical lane numbers, which are different. Change-Id: I7a90056d782d8d32fe34a0f5bdb61c3b61df1af8 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43492 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-16soc/amd/common: Don't get eSPI address from PCI if not on x86Martin Roth
Exclude lpc_get_spibase() on the PSP. This also simplifies the espi_get_bar() function. BUG=b:159811539 TEST=Build & boot trembyle; Verify address in PSP & x86 Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I5927dd40610860b54bb35a7e5b03ddb731597745 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43468 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16soc/amd/picasso: Get rid of VERSTAGE_SIZEMartin Roth
Currently, the code and data in psp_verstage is ~59K. Adding the code to save vbnv to the SPI rom increases that to 66K. Getting rid of VERSTAGE_SIZE allows verstage to grow as it needs to. BUG=b:161366241 TEST=Build & Boot Morphius with VBOOT_VBNV_CMOS_BACKUP_TO_FLASH enabled Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Ic6853b70073f9e781fc10402a2a47c9c8e0d49d3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43486 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16soc/amd/stoneyridge: Remove unused SPI #definesMartin Roth
These #defines are not used, and conflict with #defines in amdblocks/spi.h BUG=None TEST=Build stoney platforms Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I29b77a6b21a4deda6f28f5b057988cf3921540e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-07-16soc/amd/picasso/acpi,mb/{zork,mandolin}: Stop clearing PciExpWakeStatusRaul E Rangel
The kernel already clears this: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/master:src/third_party/kernel/v5.4/drivers/acpi/acpica/hwregs.c;l=390 No reason to have the firmware do it as well. BUG=b:153001807, b:154756391 TEST=Build Trembyle, boot, suspend, and resume and didn't see any ACPI errors. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ia5c79fb95dc885eaef8abc4257b6ba18c1ef1b66 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-16soc/amd/picasso,mb/{zork,mandolin}: Remove invalid UPWS variableRaul E Rangel
PMx0EE is not defined in the Picasso PPR. BUG=b:153001807, b:154756391 TEST=None Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I98caf0cd2d0bdcf19de2b945dcf74f5cf7354769 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-16mb/amd/mandolin/.../sleep.asl: Remove unnecessary variableRaul E Rangel
There is no reason to create a named variable. We can just return the package. BUG=b:153001807, b:154756391 TEST=None Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ic0ca2e6d4fb833c68d29e9948a670ace7c89b6a5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-16libpayload: allow nonblocking delay and more than one delayRonald G Minnich
Extend the local APIC timer delay so that it can be started, and waited for, independently. Add an EOI so that more than one APIC timer interrupt is possible. Previous to this, because there was no EOI, the first timer interrupt the CPU took was also the last it would take -- apic_delay would only work one time. Change-Id: Ib11aeee5b7da81287166ac68fc327e7ae62d1b84 Signed-off-by: Ronald G Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-07-16soc/amd/picasso: Drop mainboard_romstage_entry_s3Furquan Shaikh
mainboard_romstage_entry_s3() was dropped from zork (CB:43476). This function call in picasso does not do anything and hence is being dropped. BUG=b:154351731 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I10e15422d7eef5af9c19737c32e433718b6479d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43477 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16mb/google/zork: Move variant_pcie_gpio_configure() to bootblockFurquan Shaikh
On zork, bootblock is part of RW firmware in non-recovery mode, so PCIe GPIOs can be configured early on in bootblock rather than waiting until romstage. This change moves the call to variant_pcie_gpio_configure() to happen in bootblock and drops romstage.c file. BUG=b:154351731 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ic515304f35fe5623d58d6000efcb11fb9039e137 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43476 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16mb/google/zork: Drop variant_romstage_gpio_table()Furquan Shaikh
gpio_set_stage_rom table is now configuring only PCIe related GPIOs in romstage. This change moves the configuration of PCIe related GPIOs to variant_pcie_gpio_configure() to keep all the configuration for WiFi and non-WiFi PCIe pads in one place. It also drops the function variant_romstage_gpio_table() as it is unused. BUG=b:154351731 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ib1c41ba141dce6b52b6e0a250a3aa07c296068aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/43475 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16mb/google/zork: Drop redundant romstage GPIO tableFurquan Shaikh
Now that the power and reset GPIO configuration for non-PCIe devices is dropped from romstage GPIO table, the tables for pre-v3 and v3 version of schematics are exactly same. So, this change drops the duplicate table and also removes the check for v3 schematics when configuring the pads in romstage. BUG=b:154351731 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I67ca9f587c3f47912393ebaf38badcc9d76cc393 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-16mb/google/zork: Drop power and reset control in romstage for dalbozFurquan Shaikh
This change drops power and reset control for non PCIe devices in romstage for dalboz reference as this is not required. +---------------------------------------------------------------------------------------+ | GPIO| Net name | External| Internal| Domain| State at reset | State on S3 resume | | # | | Pull | Pull | | | | +---------------------------------------------------------------------------------------+ | 5 | PEN_POWER_EN | 100K PD | PD | S5 | Powered off | Powered on | | | | | | | (because of | (since power is not| | | | | | | internal PD) | disabled when | | | | | | | | entering S3) | +---------------------------------------------------------------------------------------+ | 6 |EN_PWR_TOUCHPAD| 499K PD | PU | S5 | Powered on | Powered on | | | | | | | (because of | (since trackpad | | | | | | | internal PU) | is wake source) | +---------------------------------------------------------------------------------------+ | 68 | EMMC_RESET_L | 100K PU | PD | S0 | Asserted | Asserted | | | | | | | (because of | (because of | | | | | | | internal PD) | internal PD) | +---------------------------------------------------------------------------------------+ | 76 | EN_PWR_CAMERA | 499K PD | PD | S0 | Powered off | Powered off | | | | | | | (because of | (because of | | | | | | | internal PD) | internal PD) | +---------------------------------------------------------------------------------------+ | 140 | USI_RESET | 10K PD | PD | S0 | Deasserted | Deasserted | | | | | | | (because of | (because of | | | | | | | internal PD) | internal PD) | +---------------------------------------------------------------------------------------+ | 141 | USB_HUB_RST_L | 10K PU | PD | S0 | Asserted | Asserted | | | | | | | (because of | (because of | | | | | | | internal PD) | internal PD) | +---------------------------------------------------------------------------------------+ +---------------------------------------------------------------------------------------+ | 67 |EN_PWR_TOUCHPAD| 10K PU | PD | S0 | Powered off | Powered off | | |_PS2 (pre-V3) | | | | (because of | (because of | | | | | | | internal PD) | internal PD) | +---------------------------------------------------------------------------------------+ GPIO_140 starts deasserted out of reset and S3 resume, but gets asserted in ramstage since it is eventually deasserted by OS using ACPI methods. BUG=b:154351731 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ie792a5a9d6420763ff10d1e475c094b6ee514888 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-16mb/google/zork: Drop power and reset control in romstage for trembyleFurquan Shaikh
This change drops power and reset control for non PCIe devices in romstage as this is not required. +---------------------+--------------------------------------------+--------------------+ | GPIO| Net name | External| Internal| Domain| State at reset | State on S3 resume | | # | | Pull | Pull | | | | +---------------------------------------------------------------------------------------+ | 5 | PEN_POWER_EN | 100K PD | PD | S5 | Powered off | Powered on | | | | | | | (because of | (since power is not| | | | | | | internal PD) | disabled when | | | | | | | | entering S3) | +---------------------------------------------------------------------------------------+ | 13 |EN_PWR_TOUCHPAD| 499K PD | PU | S5 | Powered on | Powered on | | |_PS2 | | | | (because of | (since trackpad | | | | | | | internal PU) | is wake source) | +---------------------------------------------------------------------------------------+ | 68 | EMMC_RESET_L | 100K PU | PD | S0 | Asserted | Asserted | | | | | | | (because of | (because of | | | | | | | internal PD) | internal PD) | +---------------------------------------------------------------------------------------+ | 76 | EN_PWR_CAMERA | 499K PD | PD | S0 | Powered off | Powered off | | | | | | | (because of | (because of | | | | | | | internal PD) | internal PD) | +---------------------------------------------------------------------------------------+ | 140 | USI_RESET | 10K PD | PD | S0 | Deasserted | Deasserted | | | | | | | (because of | (because of | | | | | | | internal PD) | internal PD) | +---------------------------------------------------------------------------------------+ +---------------------------------------------------------------------------------------+ | 67 |EN_PWR_TOUCHPAD| 10K PU | PD | S0 | Powered off | Powered off | | |_PS2 (pre-V3) | | | | (because of | (because of | | | | | | | internal PD) | internal PD) | | | | | | | | | +-----+---------------+---------+---------+-------+----------------+--------------------+ GPIO_140 starts deasserted out of reset and S3 resume, but gets asserted in ramstage since it is eventually deasserted by OS using ACPI methods. BUG=b:154351731 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ieadc62f1a13857209cf0a62f204efb9278e0e97d Reviewed-on: https://review.coreboot.org/c/coreboot/+/43462 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-16mb/google/zork: Keep USI_RST asserted in ramstageFurquan Shaikh
This change keeps USI_RST(GPIO_140) asserted in ramstage since it gets deasserted by OS using ACPI methods. BUG=b:160854397 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I8feced788e471a0efb2358d42b2146df04fb7a0c Reviewed-on: https://review.coreboot.org/c/coreboot/+/43461 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16mb/google/zork: Keep pen power enabled in sleep stateFurquan Shaikh
This change keeps pen power enabled in sleep state to allow it to charge in S3. BUG=b:155422911 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I6190496653878327f34a01f6a743db474d32e929 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43452 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16Revert "mb/ocp/deltalake: Select IPMI OCP to send POST start/end command"Philipp Deppenwiese
This reverts commit a5ca4a0c75237093f1a4d90f30c0c932e5fcd05d. Reason for revert: Breaks coreboot tree because of non existent kconfig symbol Change-Id: Ib8f55dc2f6444690945bc2dc64baad5d0c39cdf4 Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43069 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-16soc/intel/common/block/pmc: Select PMC on mainboard basisTim Chu
Currently the common soc code automatically selects POWER_STATE_DEFAULT_ON_AFTER_FAILURE which making other mainboard options unselectable. However, there're some cases that power state should change to different states after reapplying power. Make POWER_STATE_DEFAULT_ON_AFTER_FAILURE default y but do not select it in soc code so that we can disable it and select other options in the mainboard code. Tested on OCP Delta Lake. Signed-off-by: Tim Chu <Tim.Chu@quantatw.com> Change-Id: Ifa853d81ee9477d2440ceaa67b2bd6b863ee52c2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43338 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-16mb/ocp/deltalake: Select IPMI OCP to send POST start/end commandTimChu
Implement sending POST start/end command to BMC. TEST=Read POST command log in OpenBMC, if command received successfully, message may show as below, root@bmc-oob:~# cat /var/log/messages |grep -i "POST" 2020 May 28 13:21:22 bmc-oob. user.info fby3-v2020.20.2: ipmid: POST Start Event for Payload#1 2020 May 28 13:21:25 bmc-oob. user.info fby3-v2020.20.2: ipmid: POST End Event for Payload#1 root@bmc-oob:~# Signed-off-by: TimChu <Tim.Chu@quantatw.com> Change-Id: I38b512ee97c0eda6ba54482a448ef9ffc27b4ddb Reviewed-on: https://review.coreboot.org/c/coreboot/+/41993 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16mb/ocp/deltalake: Config PCH PCIe ports in devicetreeMorgan Jang
Tested on OCP Delta Lake with lspci checking if PCIe speed is changed are expected. Change-Id: I189027c403814d68db2b7c5f41fc254a293fe3a1 Signed-off-by: Morgan Jang <Morgan_Jang@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-07-16Documentation: Remove mention of manual checkpatch.pl invocationPatrick Georgi
We typically call checkpatch.pl through make lint which properly adds the option to tell checkpatch that our lines may be 96 columns long. However there's one mention of calling checkpatch directly and that confuses people with complaints about overly long lines that exceed 80 columns. The lint test that runs checkpatch (and with the right options) can also be used on a per-directory basis, so offer that instead. Change-Id: If21e925d2d2394c876724a44b0e23c9b2744c56b Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-16mb/google/kukui: Add new config 'willow'Sheng-Liang Pan
New board introduced to Kukui family. BUG=b:159194582 TEST=None BRANCH=kukui Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Icc6bcbd006008a05303693e481a54636f0645887 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43318 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16google/trogdor: Remove GPIO_AP_SUSPEND_LJulius Werner
This pin has been removed from recent revisions (or at least moved to a pin that's not controlled like a normal GPIO). It has also never been used on older ones (I think?). The same GPIO is now used as a SKU ID pin, so make sure we're not incorrectly configuring it as an output (although sku_id() overrides that later anyway, but it's still incorrect). BUG=b:160754995 Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I6e0d56e230d0bef172d7b78cc48263e9b6f059de Reviewed-on: https://review.coreboot.org/c/coreboot/+/43471 Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Philip Chen <philipchen@google.com> Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16mb/google/zork: Remove redundant PCI info from overridetreesRob Barnes
This information is redundant since it's already specified in baseboard/devicetree_trembyle.cb or baseboard/devicetree_dalboz.cb domain 0 is still required because sconfig uses it as an identity anchor to match devicetree and overridetree. BUG=b:157580724 TEST=Boot zork, usb functional Change-Id: I3c3c1c2410166b99599d7343fae3ee756f4da321 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43437 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15util/mb/google: add template files for dalboz and trembylePaul Fagerburg
Now that Zork is using upstream coreboot, we need the template files in the main branch. BUG=b:157570490 TEST=n/a Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Change-Id: I6cab4ab0b414473e0a759dce81df9872a40d3f26 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43419 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15cbgfx: Add blend functions to calculate transparencyShelley Chen
Up until now we have no way of adding transparency into our firmware screens. Add set_blend() and clear_blend() functions to store alpha value and rgb values to calculate alpha blending in calculate_colors(). BUG=b:144969091,b:160839199 BRANCH=puff TEST=dut-control power_state:rec press ctrl-d Ensure background is dimmed when dialog pops up Change-Id: I95468f27836d34ab80392727d726a69c09dc168e Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-07-15util/board-status: Reject logs with unknown timestampsPaul Menzel
Check the output of `cbmem -t` for unknown timestamps. If present, ask the user to rebuild `cbmem`. Change-Id: Ief7aa1a698f10d9721964ad1bee057fcd9f4aa40 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-07-15payloads/depthcharge: Makefile: resolve fail of concurrent buildMichael Niewöhner
Resolve missing dependency to fix concurrent building. Resolves: https://ticket.coreboot.org/issues/271 Change-Id: Idbd9155e01fcc4571a61f1bba5b2b4a446036da0 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43407 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-07-15mb/google/dedede: Enable SIS touchscreen for WaddledeeKarthikeyan Ramasubramanian
Add SiS9813 USI touchscreen support. BUG=b:160129126 TEST="emerge-dedede coreboot chromeos-bootimage", build successful. Change-Id: I42fdc5e8243d2c70c953b2f516c10f84a041c035 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43304 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15security/vboot: ensure that NVMEM is saved on every kernel space writeJett Rink
If the AP actually needs to write to the TPM, then it is important and the TPM should commit those changes to NVMEM immediately in case there is an unexpected power loss (e.g. from a USB-C port partner reset upon cold reboot request). BRANCH=none BUG=b:160913048 TEST=Verify that puff will no longer reboot loop when coreboot writes a new Hmir (Hash mirror) in the TPM Change-Id: I9597a55891d11bdf040d70f38b4c5a59c7888b8a Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43414 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15mb/google/volteer: Enable SATA Port Dito ConfigShaunak Saha
Enable SataPortsEnableDitoConfig for port 1. BUG=b:151163106 BRANCH=None TEST=Build and boot volteer. Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Change-Id: I552faaa0e7172e77208025cf4251bb848cc90709 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42415 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15soc/intel/tigerlake: Hook up SATA Port Enable DITO UPDsShaunak Saha
SataPortsEnableDitoConfig Enable DEVSLP Idle Timeout settings DmVal and DitoVal. SataPortsDmVal and SataPortsDitoVal helps to determine when to enter Device Sleep. Device Sleep enables the host bus adapter (HBA) to assert the DEVSLP signal as soon as there are no commands outstanding to the device and the port specific Device Sleep idle timer has expired. Device Sleep Idle Timeout values (PxDEVSLP.DITO and PxDEVSLP.DM) are port specific timeout values used by the HBA for determining when to assert the DEVSLP signal. They provides a mechanism for the HBA to apply a programmable amount of hysteresis so as to prevent the HBA from asserting the DEVSLP signal too quickly which may result in undesirable latencies. This patch is created based on Intel Tiger Lake Processor PCH Datasheet with Document number:575857 and Chapter number:12. * PxDEVSLP.DM -> SataPortsDmVal: Enable SATA Port DmVal DITO multiplier. Default is 15. * PxDEVSLP.DITO -> SataPortsDitoVal: Enable SATA Port DmVal DEVSLP Idle Timeout (DITO), Default is 625ms. BUG=b:151163106 BRANCH=None TEST=Build and boot volteer and TGL RVP. Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Change-Id: I6a824524738a9e0609f54bea9d892b4a42a1d3db Reviewed-on: https://review.coreboot.org/c/coreboot/+/42214 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15soc/amd/picasso/acpi: Delete unused and invalid OperationRegionsRaul E Rangel
0xc50, 0xc52, 0xc6f don't exist on Picasso. The PCI config space registers define SATA and OHCI which are at the wrong bus locations. I just remove the whole section since it's not used. We never access the PCIe Error region, or the PM2 region either. BUG=b:153001807, b:154756391 TEST=Build Trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I98aee09770f1df9f553c94580c1ee00c06a9cec1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-15soc/amd/picasso/acpi: Remove old AOAC register definitionsRaul E Rangel
We no longer need this code. It's been added differently in CB:42473. BUG=b:153001807, b:154756391 TEST=Build Trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I6fe1e465f137ba6afbf9f0dbce501b5fc845e210 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43426 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-15soc/amd/picasso/acpi: Remove invalid and unnecessary devicesRaul E Rangel
These devices are not referenced by anything else. BUG=b:153001807, b:154756391 TEST=None Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I6ea3c326247dce095b5ac1706dbc37f8b215a21e Reviewed-on: https://review.coreboot.org/c/coreboot/+/43425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-15mb/google/zork/.../sleep.asl: Remove unnecessary variableRaul E Rangel
There is no reason to create a named variable. We can just return the package. BUG=b:153001807, b:154756391 TEST=None Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I4f8f0362adf5ea5f026d0ba5ac6ac917fa160142 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43423 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-15PCI IDs: Add PCI ID for JSL DPTF/DTT PCI deviceTim Wawrzynczak
This PCI ID is required in order for JSL devices to perform SSDT generation for DPTF. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I42209d15bc4f1654814465ce1412576f7349dddc Reviewed-on: https://review.coreboot.org/c/coreboot/+/43421 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15util/intelmetool: Fix error messageEvgeny Zinoviev
Add a missing space to the message. Change-Id: I7d4042ebb587af8558294fb4961100b43910fd4a Signed-off-by: Evgeny Zinoviev <me@ch1p.io> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-07-15mainboard: Drop optional and empty ACPI \_BFS methodsAngel Pons
The ACPI specification, version 2.0 says: _BFS is an optional control method. So, remove them. They have been copy-pasted around quite a bit, and do not do anything useful. Plus, it's deprecated in later ACPI versions. Change-Id: I9ef21f231dd6051d410ac3a0fe554908409c2fa7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43443 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15amd/picasso: rework DXIO and DDI UPD handlingFelix Held
Turning the DXIO and DDI descriptor fields in the FSP_S_CONFIG struct into arrays allows to properly iterate over the fields. BUG=b:158695393 TEST=Mandolin still boots. Change-Id: I85debe4d52399e933768b89b665ff10c9f7779f8 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43434 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15vc/amd/fsp/picasso: replace #pragma pack(1) with __packed attributeFelix Held
Forgetting to add the #pragma pack() at the end of the header file can lead to hard to debug breakage, so get rid of the #pragma pack usage and add a __packed to the structs that need to be packed which has less possibly unwanted side effects. Since commit d44221f9c8f3686e040ff9481829315068b321a3 coreboot always includes commonlib/compiler.h which provides __packed. TEST=Timeless build results in identical binary. Change-Id: Icc53168f4fbc3a63a859f686b18e7023d225f8d2 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-15mb/lippert/frontrunner-af: Drop commented-out Kconfig symbolAngel Pons
Drop it before it grows moss. Change-Id: I0b4f5487cca3c864ba531cc6c78a20c2682fc43d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43287 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15mb/google/zork: Change SPI fast speed to 66mhzRob Barnes
Morphius cannot support 100Mhz fast SPI causing it to not boot. Downgrade all zork boards to fast=66mhz and normal=33mhz to be safe. BUG=b:161233767 TEST=Boot morphius Change-Id: I7744dd0cb8dede985fbdc28a64385e0bc4048402 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43459 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Eric Peers <epeers@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-15mb/google/oak: Add new DRAM modules for oakwuxy
Add DRAM support for oak: Samsung K4E6E304ED-4GB # 1001 Nanya NT6CL512T32AM-H0-4GB # 1010 BUG=b:157702981 BRANCH=oak TEST=emerge-hana chromeos-ec coreboot chromeos-bootimage depthcharge, update FW to DUTs,these DUTs can pass 'memtester' test over 48 hours. Signed-off-by: Xingyu Wu <wuxy@bitland.corp-partner.google.com> Change-Id: I95eb51debac905145f16b83c9b74a2bd31dbef45 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-07-14mb/hatch: Fix Puff baseboard missing mainboard symbolsEdward O'Callaghan
Fix a missing CONFIG_ prefix in Makefile. BUG=b:161154280 BRANCH=puff TEST=builds Change-Id: I177fcd830a8a03a8db1910bfbfd784a60dc08e11 Spotted-by: Ryan Lin. Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43438 Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14soc/intel/skylake: Move `acpi_fill_fadt` to fadt.cAngel Pons
Intel southbridges do this. Change-Id: I8ecf3c0b0c822185ca66bae1bd65b0cf24512a49 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-07-14soc/intel/braswell: Move `acpi_fill_fadt` to fadt.cAngel Pons
Intel southbridges do this. Also make `acpi_sci_irq` non-static as it is needed outside acpi.c with this change. Change-Id: I2fd2ec5a3029dc1bd1fa65dc3d1af5505f1f1dad Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43377 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-07-14soc/intel/baytrail: Move `acpi_fill_fadt` to fadt.cAngel Pons
Intel southbridges do this. Also make `acpi_sci_irq` non-static as it is needed outside acpi.c with this change. Change-Id: I702988493e3b29d807a75c70485baaa2ff6d1aa2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43376 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-07-14soc/intel/broadwell: Move `acpi_fill_fadt` to fadt.cAngel Pons
Intel southbridges do this. Change-Id: Id120e4a6b42168de58c396439593900a00d7e757 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-07-14sb/intel/lynxpoint: Move `acpi_fill_fadt` to fadt.cAngel Pons
Other Intel southbridges do this. Change-Id: I9b0c8be34e01b617352da4ff8ff37f4b44a4b334 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-07-14sb/intel/bd82x6x: Move `acpi_fill_fadt` to fadt.cAngel Pons
Other Intel southbridges do this. Change-Id: I6ae78696b0fa2d91dd2c6de0a3ef28e08d85e93b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43373 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-07-14sb/intel/ibexpeak: Move `acpi_fill_fadt` to fadt.cAngel Pons
Other Intel southbridges do this. Change-Id: I8306295fb87776aab5ed0e56e1a9c480c65fe3c6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43372 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-07-14soc/amd/common/block/include/amdblocks/acpi.h: Add missing <types.h>Elyes HAOUAS
BIT(x) needs <types.h> Change-Id: I5dc0d45567ae9879a7e12f2ccc48929d2abc9456 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-14arch/x86/postcar_loader: Remove unused 'include <cpu/cpu.h>'Elyes HAOUAS
Change-Id: I5a36f5729a1a5ad5819ebb3c46b775ba52237d65 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42080 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14cpu/intel/model_1067x: Drop <cpu/x86/mp.h> includeElyes HAOUAS
Found using: diff <(git grep -l 'include <cpu/x86/mp.h>' -- src) <(git grep -l 'CACHELINE_SIZE\|cpu_info\|mfence\|mfence\|mp_ops\|mp_init_with_smm\|MP_RUN_ON_ALL_CPUS\|mp_run_on_aps\|mp_run_on_all_cpus\|mp_park_aps\|smm_initiate_relocation_parallel\|smm_initiate_relocation' -- src/) |grep '<' Change-Id: Ib721e667144d6803261f3761a077570e0e27391d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-07-14src: Drop unused <cpu/x86/tsc.h> includeElyes HAOUAS
Found using: diff <(git grep -l '#include <cpu/x86/tsc.h>' -- src/) <(git grep -l 'TSC_SYNC\|tsc_struct\|rdtsc\|tsc_t\|multiply_to_tsc\|rdtscll\|tsc_to_uint64\|tsc_freq_mhz\|tsc_constant_rate' -- src/)|grep '<' Change-Id: Id090e232a96323adb8d9a24b81f7ae5669248f57 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42393 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14src: Remove unused 'include <cpu/x86/msr.h>'Elyes HAOUAS
Found using: diff <(git grep -l '#include <cpu/x86/msr.h>' -- src/) <(git grep -l 'IA32_EFER\|EFER_\|TSC_MSR\|IA32_\|FEATURE_CONTROL_LOCK_BIT\|FEATURE_ENABLE_VMX\|SMRR_ENABLE\|CPUID_\|SGX_GLOBAL_ENABLE\|PLATFORM_INFO_SET_TDP\|SMBASE_RO_MSR\|MCG_CTL_P\|MCA_BANKS_MASK\|FAST_STRINGS_ENABLE_BIT\|SPEED_STEP_ENABLE_BIT\|ENERGY_POLICY_\|SMRR_PHYSMASK_\|MCA_STATUS_\|VMX_BASIC_HI_DUAL_MONITOR\|MC0_ADDR\|MC0_MISC\|MC0_CTL_MASK\|msr_struct\|msrinit_struct\|soc_msr_read\|soc_msr_write\|rdmsr\|wrmsr\|mca_valid\|mca_over\|mca_uc\|mca_en\|mca_miscv\|mca_addrv\|mca_pcc\|mca_idv\|mca_cecc\|mca_uecc\|mca_defd\|mca_poison\|mca_sublink\|mca_err_code\|mca_err_extcode\|MCA_ERRCODE_\|MCA_BANK_\|MCA_ERRTYPE_\|mca_err_type\|msr_set_bit\|msr_t\|msrinit_t' -- src/) |grep '<' Change-Id: I45a41e77e5269969280e9f95cfc0effe7f117a40 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41969 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14src/drivers/usb/gadget.c: Add missing includeElyes HAOUAS
Replace unused <stddef.h> with missing <stdint.h>. Change-Id: I1ca111a30153526c3915bf393208fb2b4c569c01 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43347 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14soc/intel/baytrail/northcluster.c: Add missing includeElyes HAOUAS
Replace unused <stddef.h> with missing <stdint.h>. Change-Id: I85745c331c81a419cef4547fc1c67bde1e202e8f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43346 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14soc/intel/baytrail/romstage/pmc.c: Add missing includeElyes HAOUAS
Replace unused <stddef.h> with missing <stdint.h>. Change-Id: If8384f4fea66e26d7377311e7bd8379c7848a26f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43345 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14soc/intel/baytrail/romstage/raminit.c: Add missing includeElyes HAOUAS
Replace unused <stddef.h> with missing <stdint.h>. Change-Id: I659a067e3b737dc7efe5bdadfd88207cd4d7175d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43344 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14soc/intel/braswell/romstage/romstage.c: Add missing includeElyes HAOUAS
Replace unused <stddef.h> with missing <stdint.h>. Change-Id: I43b8ba5849de30e2ee253382ef85b17f2d0ae589 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43343 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14soc/rockchip/rk3399/display.c: Add missing includeElyes HAOUAS
Replace unused <stddef.h> with missing <stdint.h>. Change-Id: Ibdde8fb5ec5bf7d25facd78064a7837d24fa2c8a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43342 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14src/drivers/usb/ehci_debug.c: Add missing includeElyes HAOUAS
Replace unused <stddef.h> with missing <stdint.h>. This is needed for 'u64'. Change-Id: Ie99c27bd6a7d982bba9a93342f3e3b83a1c09e8d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43341 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-14src: Remove unused 'include <stdint.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <stdint.h>' -- src/) <(git grep -l 'int8_t\|int16_t\|int32_t\|int64_t\|intptr_t\|intmax_t\|s8\|u8\|s16\|u16\|s32\|u32\|s64\|u64\|INT8_MIN\|INT8_MAX\|INT16_MIN\|INT16_MAX\|INT32_MIN\|INT32_MAX\|INT64_MIN\|INT64_MAX\|INTMAX_MIN\|INTMAX_MAX' -- src/) |grep -v vendorcode |grep '<' Change-Id: I5e14bf4887c7d2644a64f4d58c6d8763eb74d2ed Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41827 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14src/acpi/soundwire.c: Add missing <stddef.h>Elyes HAOUAS
size_t needs <stddef.h>. Replace unused <stdint.h> with <stddef.h>. Change-Id: Ib9ab5555adeeddd9eea7a93dbb166d8479eca42e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43340 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14src: Remove unused 'include <types.h>'Elyes HAOUAS
Files found using: diff <(git grep -l '#include <types.h>' -- src/) <(git grep -l 'BIT(\|size_t\|wchar_t\|wint_t\|NULL\|DEVTREE_EARLY\|DEVTREE_CONST\|MAYBE_STATIC_NONZERO\|zeroptr\|int8_t\|int16_t\|int32_t\|int64_t\|intptr_t\|intmax_t\|s8\|u8\|s16\|u16\|s32\|u32\|s64\|u64\|INT8_MIN\|INT8_MAX\|INT16_MIN\|INT16_MAX\|INT32_MIN\|INT32_MAX\|INT64_MIN\|INT64_MAX\|INTMAX_MIN\|INTMAX_MAX\|bool\|true\|false\|cb_err\|CB_SUCCESS\|CB_ERR\|CB_ERR_ARG\|CB_CMOS_\|CB_KBD_\|CB_I2C_\|cb_err_t\|DIV_ROUND_CLOSEST\|container_of\|__unused\|alloca(\|ARRAY_SIZE\|ALIGN\|ALIGN_UP\|ALIGN_DOWN\|IS_ALIGNED\|__CMP_UNSAFE\|MIN_UNSAFE\|MAX_UNSAFE\|__CMP_SAFE\|__CMP\|MIN(\|MAX(\|ABS(\|IS_POWER_OF_2\|POWER_OF_2\|DIV_ROUND_UP\|SWAP(\|KiB\|MiB\|GiB\|KHz\|MHz\|GHz\|offsetof(\|check_member\|member_size' -- src/)|grep -v vendor |grep '<' Change-Id: I5d99d844cc58d80acb505d98da9d3ec76319b2eb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41677 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14src: Remove unused 'include <string.h>'Elyes HAOUAS
Found using: diff <(git grep -l '#include <string.h>' -- src/) <(git grep -l 'STRINGIFY\|memcpy\|memmove\|memset\|memcmp\|memchr\|strdup\|strconcat\|strnlen\|strlen\|strchr\|strncpy\|strcpy\|strcmp\|strncmp\|strspn\|strcspn\|strtok_r\|strtok\|atol\|strrchr\|skip_atoi\|snprintf' -- src/) |grep -v vendorcode |grep '<' Change-Id: I12802d0a6254b2fa39d59f485008bb2012f7b32d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41913 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14mb/google/zork: Add USB to baseboard devicetreeRob Barnes
Add USB ports, USB user-facing camera and USB bluetooth to devicetree. USB ports 4 and 5 are duplicated for picasso and dali. BUG=b:158096224 TEST=Boot Trembyle and Dalboz, Dump acpi tables Change-Id: Icf8628d91e27a3afdc5fd67a53b44089c809da87 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-14mb/google/zork: Split devicetree between baseboardsRob Barnes
Split zork baseboard devicetree between dalboz and trembyle. The devicetree is simply duplicated, no other changes in this commit. BUG=b:158096224 TEST=Build coreboot for zork Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I5b26770790092c69db9567fa4337edd21a6ed809 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-14mb/google/hatch: Set SA slow slew rate to 1/2 for jinlon/dratiniWisley Chen
Screen flickered on VT2 on some devices after idle a period of time. Remove SSR (1/8) setting for SA to default SSR (1/2), screen flicking issue disappeared, and didn't affect acoustic noise much. Because CB:38212 (commit eae254e) caused this issue. BUG=b:160754994 TEST=build dratini, observe that screen flick issue disapppered Change-Id: I9e81c2f15dd6babfa360eee213fc4ab6310c7455 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43284 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14mainboard/volteer: Enable SaGv for volteer2, delbin & voxelShreesh Chhabbi
SaGv needs to be enabled for only QS. On ES2, we are seeing system instability. BUG=b:159198381 TEST=Tested for boot. Power and performance tests were run with volteer2 with qs setup. System showed stability. Tested for boot stability on on delbin. Change-Id: I1bce3b9f837fb19ba5a20ae31750a73474a86788 Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42483 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-07-14mb/google/kukui: Add new configs 'Cerise' and 'Stern'xuxinxiong
New boards introduced to Kukui family. BUG=b:160854400 TEST=make # select Cerise and Stern BRANCH=kukui Change-Id: I5841d57c0891d5191dd96097b90da889855b56c8 Signed-off-by: xuxinxiong <xuxinxiong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43320 Reviewed-by: Zhaoyou Hong <hongzhaoyou@huaqin.corp-partner.google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Chen-Tsung Hsieh <chentsung@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14sb/intel/lynxpoint: Define SerialIO devfnsAngel Pons
This reduces differences with Broadwell. Tested with BUILD_TIMELESS=1, Google Panther remains identical. Change-Id: I81c34fd03a176d0575f2fbd254052d90f2b38487 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2020-07-14mb/google/volteer: config QS silicon devices for CSE LITENick Vaccaro
Configure volteer2 and delbin, the two variants currently using preQS or QS silicon, to use CSE Lite. BUG=b:158140797 TEST=cd to volteer's asset_generation folder, execute "./gen_all_variant_images.sh" and verify that all variant images are produced. Change-Id: I5e444529b090d82094b9da0df2648ea4cdb2888e Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-07-13soc/amd/picasso: supply SMBIOS type 17Rob Barnes
Extract DRAM info from AMD_FSP_DMI_HOB and store it as mem_info in cbmem with id CBMEM_ID_MEMINFO. Subsquently extract mem_info objects from cbmem to build SMBIOS type 17 tables. BUG=b:148277751,b:160947978 TEST=dmidecode -t 17 BRANCH=none Change-Id: Iacedbb017d19516674070f89ba0aa217f55383e3 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-07-13mb/google/zork: Fix check for variant_uses_v3_schematics()Furquan Shaikh
CB:43224 ("mb/google/zork: Add helpers for v3 schematics and wifi power enable") added helper functions for determining if a board uses v3 schematics. However, it introduced a regression by adding a wrong check for variant_uses_v3_schematics() in variant_audio_update(). This change fixes the check to ensure that dmic_gpio is updated when variant is not using v3 schematics. BUG=b:161141258,b:161128964 TEST=Verified on trembyle that trackpad works again (it was broken because of the regression). Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I0e6ad844f68cface7b545f1547bd94470c30dde4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43415 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-13mb/google/zork: Create Woomax variantKane Chen
Create the woomax variant of the zork reference board by copying the template(coreboot-zork/util/mainboard/google/trembyle) files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.1.1). BUG=b:158343602 BRANCH=None TEST=emerge-zork coreboot Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I0bb8ce1851f4064d24e48fd8957e2f9fe1e80b53 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42680 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-12mb/google/beltino/bootblock.c: Drop unused includeAngel Pons
Change-Id: I2994b8bf5521b539a9f3585a3221452b1807837a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-07-12mb/google/zork: Update SPI mode to 100MHz, 1-2-2Martin Roth
Change SPI speed from 66MHz, mode 1-1-2 to 100MHz mode 1-2-2. “1-2-2" means command, address and data are transmitted through 1 wire, 2 wire and 2 wire, respectively. BUG=b:160603142 TEST=Boot on trembyle, verify register settings. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I14f96e3c085126c70e64ef3a3f5b7b54ce6cbffe Reviewed-on: https://review.coreboot.org/c/coreboot/+/43306 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Rob Barnes <robbarnes@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12soc/intel/baytrail: Add dedicated devices for MMC and MMC 4.5 controllerMate Kukri
- Correctly detect device 17h as the MMC 4.5 controller - Support detection of the "old" MMC controller at device 10h Signed-off-by: Mate Kukri <kukri.mate@gmail.com> Change-Id: I9f0007b1cf01df09f775c088397c3b9c846908c3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-07-12soc/intel/gpio: Convert PAD_CFG0_ROUTE_* to PAD_IRQ_ROUTE()Maxim Polyakov
As with other macros, convert PAD_CFG0_ROUTE_* to PAD_IRQ_ROUTE() to make the code in gpio_defs.h cleaner. Tested with BUILD_TIMELESS=1, Kontron COMe-mAL10 on T10-TNI carrierboard does not change. Change-Id: Iadc9c4b3c96ae04c56d060cb060737a8eba7f165 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41034 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12soc/intel/gpio: Convert PAD_CFG0_RX_POL_* to PAD_RX_POL()Maxim Polyakov
Converts PAD_CFG0_RX_POL_* macros to PAD_RX_POL() to make the code cleaner and reduce the length of the macro. Tested with BUILD_TIMELESS=1, Kontron COMe-mAL10 on T10-TNI carrierboard does not change. Change-Id: I09a048fd38ccb994f53c8829c549bc2b368fa546 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41033 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12intel/gpio: Convert PAD_CFG0_TRIG_* to PAD_TRIG()Maxim Polyakov
Converts PAD_CFG0_TRIG_ * macros to PAD_TRIG() to make the code cleaner and reduce the length of the macro, which is often used. Tested with BUILD_TIMELESS=1, Kontron COMe-mAL10 & T10-TNI carrierboard does not change. Change-Id: I9e1b4118fd6c6f0d58ee38a743aa8c27535f0dd9 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41032 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12mb/intel/tglrvp: Add SMI handler for tglrvpJohn Zhao
This change adds SMI handler for SCI, S3/S5 wake up and LID closed events on tglrvp platform. TEST=Built image and booted to kernel. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I0bc72f164e86f1921e0cad39f9749e8e3be0778f Reviewed-on: https://review.coreboot.org/c/coreboot/+/42957 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-07-12mb/intel/tglrvp: Add EC_HOST_EVENT_USB_MUX for tglrvpJohn Zhao
This change allows EC to change state of host-controlled USB MUX. TEST=Built image and booted to kernel. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Ia7c331157b1b4039e42c373f5b130a66f7594458 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42955 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12payloads/external: fix depthcharge build from sourceSelma BENSAID
Signed-off-by: Selma BENSAID <selma.bensaid@intel.com> Change-Id: I17ae7450a9641268fe392bed0f24846abc8e6f56 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43203 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12superio/nuvoton: Avoid NULL pointer dereferenceJohn Zhao
Coverity detects dereferencing a pointer that might be "NULL" when calling acpigen_write_scope. Add sanity check for scope to prevent NULL pointer dereference. Found-by: Coverity CID 1420207 Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Icc253c63aadef1c0ecb116a38b608f64f80abc79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42839 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-07-12mb/prodrive/hermes: Deselect PCIEXP_CLK_PM and L1_SUB_STATEChristian Walter
Set default of PCIEXP_CLK_PM and PCIEXP_L1_SUB_STATE to n as this breaks booting Windows with a PCIE NVIDIA. Change-Id: Ie8768b91c27c4159f9b3c7f94699134a82decea0 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43179 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-07-12soc/intel/common/block/pcie: Select ASPM on mainboard basisChristian Walter
Current the common soc code automatically selects PCIEXP_CLK_PM and PCIEXP_L1_SUB_STATE which breaks booting Windows with a PCIE NVIDIA graphics card attached on mainboards that do not have a CLKREQ# signal. This is commonly used on server and workstations boards where the additional power savings of L1 substate are not required. Make the PCIEXP_CLK_PM and PCIEXP_L1_SUB_STATE default y but do not select it anymore by the soc code, thus we can disable it in the mainboard code. Tested on CFL with Windows 10. Change-Id: I025e13d6d8183256647e4c034e31bafa235f7eb7 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41696 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12mb/google/volteer: Convert static ASL files to new DPTF implementationTim Wawrzynczak
This patch converts the current DPTF policies from static ASL files into the new SSDT-based DPTF implementation. All settings are intended to be copied exactly. Change-Id: I964c53afbd503d47a07b982672425f0e7a986a3f Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41895 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12mb/google/dedede: Add ability to provide override GPIO tableKarthikeyan Ramasubramanian
For variants with slightly different GPIO configuration, add support to pass an override GPIO configuration table. BUG=None TEST=Build and boot the waddledee mainboard. Change-Id: I2f1c6dc2ea5499bff96a471c4461339ef01ee19a Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43279 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-07-12mb/ocp/deltalake: Pull POST complete pin low before booting payloadJohnny Lin
Delta Lake uses GPIO pin GPP_B20 for POST complete event, BIOS needs to pull this pin low for BIC (Bridge IC) to start reading sensors. Tested=On Delta Lake oBMC, bic-util slotx --get_gpio to confirm the pin is low. Change-Id: I7e05f8a7caead8ee0632af4ff60ccd8b2412b3dd Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43162 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-07-12tests: Improve test_skip_atoi() in /lib/string-test test caseAnna Karas
Confirm that the pointer is updated to point behind the parsed number. Signed-off-by: Anna Karas <aka@semihalf.com> Change-Id: If75a51056229904612c6a9ea20db4182d1935009 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-12tests: Move the console stubs to a dedicated directoryAnna Karas
Move the console functions definitions out from lib/b64_decode code to a dedicated directory. Signed-off-by: Anna Karas <aka@semihalf.com> Change-Id: I22a6a592f0d4d509f19920f4ad2b18e8ed83a03e Reviewed-on: https://review.coreboot.org/c/coreboot/+/43285 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 22:36:25 +0000