aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-29src/mainboard/{cavium,sifive}: Use $(obj) instead of buildRaul E Rangel
The build directory might not exist in the src dir. BUG=b:112267918 TEST=make what-jenkins-does Change-Id: I2d4fa6cc455592f92070796cd065cd66646d5ba9 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-07-29soc/nvidia/tegra124: Assert divisor is non-zeroJacob Garber
The logic for the calculation of plld.m is rather complicated, so do a sanity check that it is non-zero before doing the division. Change-Id: I60f49b8eed47a3de86713304bde7a4d3f3d935dd Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1260981 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-29vc/cavium/bdk/libdram: Print unknown voltagesJacob Garber
volt_str is used to print information about the RAM configuration in report_common_dimm(), so let's print out "unknown voltage" if the voltage isn't recognized rather than a garbage value. Change-Id: I8e85917fd682e166172fbf10597bde4a8a11dfc7 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1393958, 1393982 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34576 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-29haswell: reinitialize EHCI debug hardware after raminitIru Cai
Tested on Lenovo ThinkPad T440p. Change-Id: I54b0c9dbb64819f0f502783b632470d27ed0b2b1 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34358 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-29util/amdfwtool: Correct fletcher32 algorithmMarshall Dawson
Change the fletcher32 checksum calculation to match PSP and AGESA implementations. The symptom of the failure has only been noted in Picasso's BIOS Directory Table, when a BIOS binary image of different sizes were passed to amdfwtool. The PSP halts the boot process with the bad BDT checksum, and if allowed to continue, AGESA asserts later due to a failed BDT verification. This version has been verified to produce the same result as found at https://en.wikipedia.org/wiki/Fletcher%27s_checksum. TEST=Build apu2, bettong, grunt and verify before/after amdfw.rom is unchanged. Change-Id: I2ba2c49a70aa81c15acaab0be6b4c95e7891234f Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34574 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-29mb/google/octopus: Add keyboard backlight supportWisley Chen
Dorp device support keyboard backlight, so enable it. BUG=b:138413969 BRANCH=octopus TEST=emerge-octopus coreboot Change-Id: If0c7b22b4be2a5d5216404a6944ac887883e9a47 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Marco Chen <marcochen@google.com>
2019-07-29soc/intel/cannonlake: Correct the data type of serial_io_devAamir Bohra
Change-Id: Id974a4bb84b7d5caddece04f93bf4e830d15b576 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34466 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-28sb/intel/common/spi: Fix opmenu setupNico Huber
Remove a spurious reference: the `optype` field is already the pointer we want. Change-Id: I65eb3a519db9037c84750c5d40e3f19a1e360361 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-07-28riscv: Remove unused headersPatrick Rudolph
Change-Id: I4cd03e043e1bc2795b98d6ec2f88efa5b50d872b Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34141 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-28lib: Rewrite qemu-armv7 ramdetectPatrick Rudolph
* Move armv7 RAM dection to a common place * Enable it for all emulated platforms * Use 32bit probe values and restore memory even on failure * Use the new logic on the following boards: ** qemu-armv7 ** qemu-riscv Tested on qemu-system-riscv: Fixes kernel panic due to wrong memory limits reported. Change-Id: I37386c6a95bfc3b7b25aeae32c6e14cff9913513 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33934 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-28util/abuild: Add asserts flag to getoptsMartin Roth
We recently added the --asserts option to set asserts as fatal in abuild but didn't add the flag to getopts, so it gets rejected as an invalid argument. Change-Id: Ic70e9a2bec039955cf62c175875598773ade2d3d Signed-off-by: Martin Roth <martinr@coreboot.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-07-28mainboard/facebook/fbg1701: Add VBT binaryFrans Hendriks
Add VBT 8.0.1038 binary. Panel #10 is modified to support the 1200x1920 LCD panel. This panel is configured as default. LCD and HDMI are working fine. BUG=N/A TEST=booting Facebook FBG1701 Change-Id: If327e4e071df61b02fcec45213c2b700320ef269 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-07-283rdparty/opensbi: Bump versionPatrick Rudolph
Use latest OpenSBI that include support for dynamic firmware loader. That allows us to use OpenSBI similar to BL31 on aarch64: * coreboot loads the payload * coreboot loads OpenSBI ELF right before payload handoff * OpenSBI does platform lockdown and provides runtime services * OpenSBI hands control to already loaded payload The uncompressed compiled OpenSBI code is about 41KiB. Required to boot GNU/Linux on qemu-riscv as some instructions needs to be emulated by SBI. Change-Id: If7ed706bc54a75fb583a8aa46fdd61ae7d18c546 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34139 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-07-26sb/intel/bd82x6x: Add support to disable xHCIPatrick Rudolph
Set FD bit if xHCI is disabled in devicetree. Change-Id: I3d08ded10daea6d86857ebbbf3f8dcc85ebe9df4 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-07-26superio/fintek: Add f81803ARichard Spiegel
Add f81803A plus the capability to control the fan with any fintek SIO. This will be done through a common API, though currently only F81803A will have it implemented. BUG=none. TEST=Tested later with padmelon board. Change-Id: I3d336e76bccc38452b1b1aefef5d4a4f7ee129a8 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-07-26arch/ppc64: Make PPC64 stages select ARCH_PPC64Arthur Heymans
Also don't define the default as this result in spurious lines in the .config. This also cleans up an unused Kconfig file. In the generated config.h CPU_QEMU_POWER8 is gone as expected and ARCH_RAMSTAGE_PPC64 moves a few lines, but the value stays the same. Change-Id: I70b64e49e1ce07b8f30d9bbc493272bdfb3bb0bf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31314 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-26soc/intel/baytrail/Makefile.inc: Sort entriesAngel Pons
Change-Id: Ic35a901c8272928a0389b38a74f4eac74977a080 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-26soc/mediatek/mt8183: Init SSPMErin Lo
Load SSPM firmware and boot up SSPM. BUG=b:80501386 BRANCH=none Test=We can see "SSPM is alive" in ATF stage if SSPM enabled and ipi success Change-Id: I9285034fc8ce38b40134f5eb7b986a663175e620 Signed-off-by: Erin Lo <erin.lo@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31835 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-26soc/nvidia/tegra124: Correct bitwise operatorsJacob Garber
We are treating reg_val like a bit mask, so use bitwise or instead of boolean or, and use |= to enable certain bits instead of overwriting the whole variable. Change-Id: Ia8c0ea5a58e25b3b58ed82caba20f8e49a30fb68 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1287070 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-07-26mb/google/hatch/helios: Update GPIO and device treeTim Wawrzynczak
Based on updated schematics, change polarity of USI_INT, and add the reset and enable GPIOs to the touchscreen ACPI node. The stop GPIO can't be used with the current implementation of _ON, as the way it's wired will cause power sequencing to fail. BUG=b:137133194, b:138240502 BRANCH=none TEST=Compiles, don't have next board rev to test with Change-Id: I1dfb8e649418e4c5e9b897fb4bc11393adc21ea2 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-07-26lib: add string.c to verstagePatrick Georgi
Change-Id: I5aa3bb2c72dcf127d418c989f6b63c9b1f412f08 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-26util/testing: Allow adding abuild options to what-jenkins-doesPatrick Georgi
JENKINS_ABUILD_OPT is passed in abuild's command line Change-Id: I5e7fbb77a3c6592a4414a6c1e3f7556c7e3a824c Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
2019-07-26util/abuild: Add --asserts flagPatrick Georgi
This enables fatal asserts, which can be useful to get better diagnostics by the build tools (both compilers and static analysis.) Change-Id: I1e1653f465fe1f545878d6eec83b8645dc17d9cb Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
2019-07-26util/testing: Factor out abuild options in what-jenkins-doesPatrick Georgi
The abuild command line can vary a lot depending on options and the line became unwieldy (plus, it's on two lines because we run abuild twice), so factor it out into a variable. Change-Id: I102756fb95c93f542d534610bf9737a13ac1ad62 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
2019-07-26libpayload/serial/qcs405: Mark uart console as suchPatrick Georgi
depthcharge prefers knowing where its input comes from BUG=b:137378326 BRANCH=none TEST=ctrl-d / enter to enter dev-mode works now. Change-Id: I74b5be18c3583be17c73950ced93fad883690090 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34451 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-26src/device/oprom: Fix bootsplash display code for optionromsJohanna Schander
So far the bootsplash is only correctly rendered if the framebuffer is set up as 1024x768@16. Different resolutions did not show anything, differnent depth resulted in the distorted images. This commit removes this limit by using the actual framebuffer resolutions and combines the code for x86 and yabel. For the moment the bootsplash is still limited to VGA-OptionROM framebuffer init. It was tested in 1280x1024@32 on the wip razer blade stealth using the intel vgabios. Change-Id: I5ab7b8a0f28badaa16e25dbe807158870d06e26a Signed-off-by: Johanna Schander <coreboot@mimoja.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34537 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-26oprom/yabel: Fix comment to fix the buildKyösti Mälkki
Old comment did not match the pattern required to not flag the fall-through as an error. Change-Id: I2afaca969c295a5dc4389dad0ce898c87bb841a6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-by: Johanna Schander <coreboot@mimoja.de> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-07-25payloads/external/Yabits: Pass XGCCPATHNico Huber
Pass `XGCCPATH` instead of individual programs as that is what the Makefile expects. Change-Id: I3267ec5259e9d37b2f3b0b8c126d173fc8b5a3ca Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-25xcompile: Store XGCCPATHNico Huber
It can be useful to pass along to external projects, e.g. payloads. Change-Id: I61c7bb162e2737a562cbef08b32ebbafd9cf1cb0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34555 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-25crossgcc: Add nasm to toolchainMartin Roth
Tianocore payload uses nasm. Supply it in the coreboot toolchain instead of relying on system version. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I086cbe6c46f7c09b2a7a83e177b32fd1bdf99266 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33024 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-25crossgcc: Upgrade CMake to 3.15.0Elyes HAOUAS
Changes: https://cmake.org/cmake/help/v3.15/release/3.15.html Change-Id: Ic9db9050bec45d33d56ee53e3692276494f306de Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33053 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-25crossgcc: Upgrade acpica to version 20190703Elyes HAOUAS
Changes: https://acpica.org/node/171 Change-Id: I3883718623e4a23a901a446f738a9e8c988d8433 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-25crossgcc: Upgrade Expat to version 2.2.7Elyes HAOUAS
Change-Id: If3611494228a9228b0b323038ba1e884a1bde10f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33825 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-25crossgcc: Upgrade Python to version 3.7.4Elyes HAOUAS
Change-Id: I2d4a93fa43cf662685d4c439bcff04e338d51375 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32077 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-25crossgcc: Upgrade GDB to version 8.3Elyes HAOUAS
Change-Id: I7a85ad171fa259e0dcb0019941d735ef41511737 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32754 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-25ec/google/wilco: Hide wilco symbols when unusedElyes HAOUAS
This cleans up .config file from unused wilco symbols. Change-Id: I813d3fe57b97e2c1ba67e1e3674de256c2529029 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34539 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-25soc/intel/fsp_broadwell_de: Fix use of config_of()Kyösti Mälkki
Change-Id: I96d423720fbe67c067373436ad250edf37939e99 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-25soc/intel: Guard remaining SA_DEV_ROOT definitionKyösti Mälkki
Prevent implicit cast to pointers. The compiler doesn't warn about the conversion from integer to pointer without a cast, because SA_DEV_ROOT is literally '0' and there seems to be an exception for that conversion. Change-Id: I64fc156e3b9f578414ad03a00edb7cf3e33205c1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-25soc/intel/broadwell: Fix case of SA_DEV_ROOTKyösti Mälkki
Commit 71756c2 soc/intel: Expand SA_DEV_ROOT for ramstage removed SA_DEV_ROOT expanding to device pointer. We missed the case here, use __SIMPLE_DEVICE__ instead for the file. Change-Id: I4331298837afa3b8c8321da610f99f8f5fa54737 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-25mb/purism/librem_skl: use SOC_INTEL_COMMON_BLOCK_HDA_VERBMatt DeVillier
Remove old hda_verb.c code copied from intel/kblrvp7, as it's been superseded by the common block HDA implementation. Fixes a null pointer error preventing the HDA codecs from being initialized, as found in Coverity CID 1403651. Test: build/boot Librem 13v2, verify functional audio Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I2fd5363aad027f215f93964bc6a85f00fea86c88 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34531 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-25mb/getac/p470: Remove unneeded whitespacesElyes HAOUAS
Change-Id: I8e36dc1553faa618aa852c06861029b4c0bdb27a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-07-25soc/{qualcomm,rockchip}: Use 'include <stdlib.h>' when appropriateElyes HAOUAS
Also including <types.h>, is supposed to provide stdint and stddef. Change-Id: Iab605f6be4a48c10fa5aae7a1222520149ad1392 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33691 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-25soc/mediatek: Use 'include <stdlib.h>' when appropriateElyes HAOUAS
Also including <types.h>, is supposed to provide stdint and stddef. Change-Id: Id6d881055826044d04843ba165641131b9111342 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-25soc/nvidia: Use 'include <stdlib.h>' when appropriateElyes HAOUAS
Also including <types.h>, is supposed to provide stdint and stddef. Change-Id: I812d468c68b31917da5d406e2fb3b84bc6331b69 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-25soc/qualcomm/ipq806x: Remove unnecessary allocationJacob Garber
The bus variable doesn't live outside the scope of this function, and is only used as a convenient way for passing the pointers to all the sub-functions, so it doesn't need to be allocated. Put it on the stack instead. Change-Id: I4370d77445952731d20f7d9a91803612f4d21aef Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1294801 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-25soc/intel/cannonlake: Split the "internal PME" wake-up into more detailPaul Fagerburg
The "internal PME" wake-up source could be from integrated LAN, HD audio/audio DSP, SATA, XHCI, CNVi, or an ME maskable host wake. chromium:1680839 adds USB port details to the wake-up when the XHCI causes the wake-up. Expand the logging for wake-up details to identify and log the other wake-up sources with more details. Note that wake on Integrated LAN (GbE), SATA, and ME Maskable Host Wake are not in use on Hatch, so these will not be tested. BUG=b:128936450 BRANCH=none TEST=``FW_NAME=hatch emerge-hatch chromeos-ec depthcharge vboot_reference libpayload coreboot-private-files intel-cmlfsp coreboot-private-files-hatch coreboot chromeos-bootimage`` Ensure /build/hatch/firmware/image-hatch.serial.bin has been built. Program image-hatch.serial.bin into the DUT using flashrom. Switch the DUT to the console (Ctrl-Alt-F2, or use the AP console via servo). XHCI USB 2.0 * Plug a USB keyboard into a USB-A port * ``powerd_dbus_suspend`` * Verify low power mode by issuing the ``powerinfo`` command on the EC console (via servo). Expect to see ``power state 4 = S0ix``. * Press a key on the USB keyboard * ``mosys eventlog list`` shows: 12 | 2019-06-26 14:52:23 | S0ix Enter 13 | 2019-06-26 14:53:07 | S0ix Exit 14 | 2019-06-26 14:53:07 | Wake Source | PME - XHCI (USB 2.0 port) | 3 15 | 2019-06-26 14:53:07 | Wake Source | GPE # | 109 CNVi (connected to Wi-Fi): * Enable wake on disconnect via ``iw phy0 wowlan enable disconnect`` * Set up a hotspot on an Android phone * Connect the Chromebook to th hotspot * ``powerd_dbus_suspend`` * Verify low power mode by issuing the ``powerinfo`` command on the EC console (via servo). Expect to see ``power state 4 = S0ix``. * Turn off the hotspot on the phone * ``mosys eventlog list`` shows: 8 | 2019-07-11 10:58:17 | S0ix Enter 9 | 2019-07-11 10:59:17 | S0ix Exit 10 | 2019-07-11 10:59:17 | Wake Source | PME - WIFI | 0 11 | 2019-07-11 10:59:17 | Wake Source | GPE # | 109 XHCI USB 3.0 * TBD HD Audio * TBD Change-Id: I2c71f6a56b4e1658a7427f67fa78af773b97ec7f Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34289 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-25mb/google/poppy/variant/nami: add sku ids of bardRen Kuo
add two sku ids of bard: 0x1009CE0 0x1009CE2 BUG=b:137892804 TEST=emerge-nami coreboot Change-Id: I299ccb36739d83e38f37e0b2cbba44c34343c975 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-25soc/nvidia/tegra210: Prevent unintended sign extensionJacob Garber
The perennial problem with u16 << 16 strikes again - the u16 is implicitly promoted to an int before the shift, which will then become negative if the highest bit of the u16 was set. Normally this isn't much of a problem, but in this case tegra_dsi_writel() expects a 64 bit integer for that argument, and so it will be sign-extended to a very large unsigned integer if it is negative. Cast bytes to a u32 beforehand to prevent the implicit promotion and thus this problem. Change-Id: Iaf0fb1040ccafafde0093e9bb192c802b86cb2ac Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1294800 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34529 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-25soc/nvidia/tegra210: Add null pointer checkJacob Garber
Check that tx is not null before accessing it, similar to the previous if statements. Change-Id: I820cb670026bb12a54c63227aa04e778fd49c66a Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1294805 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34530 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-25soc/rockchip/rk3399: Use 64 bits in multiplicationJacob Garber
This multiplication is of the form u64 = u32 * u32. Despite being stored in a 64 bit variable, the intermediate value is still calculated using 32 bit math, which could possibly overflow. Cast one of the variables to a u64 to ensure it uses 64 bit math instead to avoid this. Change-Id: Ib08624812e933fdca5a51150ab36d3be49383326 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1375443 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-25mb/*/chromeos.c: Remove some ENV_RAMSTAGE and __SIMPLE_DEVICE__Kyösti Mälkki
Use explicit simple PCI config accessors here. Change-Id: Ifa3814fdd7795479ca5fdbfc4deb3fe8db9805f3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-25soc/intel/icelake: Add ENABLE_DISPLAY_OVER_EXT_PCIE_GFX kconfigSubrata Banik
This patch creates new kconfig option to bring display over external PCI based GFX card. This kconfig to select required kconfig which are not default selected by VGA_ROM_RUN to launch legacy oprom from pci based GFX card. Change-Id: I8ebde69e38defbe3321eb5e5bbd632c209ae2cd8 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33738 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2019-07-24Documentation/releases: Make sure lists look like lists in markdownPatrick Georgi
Add bullet points for to achieve that. Change-Id: Iea6811147ddad4e6e3372ca1ccd8fdaf8bb5cb77 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-24Documentation/releases: Also mention RELOCATABLE_RAMSTAGE in deprecationsPatrick Georgi
We plan to retire that symbol after 4.11 as well, with relocatable ramstage becoming the normal mode of operation. Change-Id: I36029215e5c8726f7dcc268bddc0d2b0161e3c40 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34500 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-07-24device: Default to VESA/linear framebuffer for ChromeOSNico Huber
Building for ChromeOS implies the use of Depthcharge which doesn't support legacy text mode. Change-Id: I7fd82bfed1e59de2de75419cfaea6f0c19cfdf5e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34483 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-24soc/intel/common: Set controller state to active in GSPI initMeera Ravindranath
Set the controller state to D0 during the GSPI sequence,this ensures the controller is up and active. BUG=b:135941367 TEST=Verify no timeouts seen during GSPI controller enumeration sequence for CML and ICL platforms. Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I2f95059453ca5565a38650b147590ece4d8bf5ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/34449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2019-07-24soc/intel/common: Set controller state to active in uart initUsha P
Set the controller state to D0 during the uart init sequence, this ensures the controller is up and active. One more argument struct device *dev has been added to uart_lpss_init function for the same. BUG=b:135941367 TEST=Verify no timeouts seen during UART controller enumeration sequence in CML and ICL platforms. Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I0187267670e1dea3e1d5e83d0b29967724d6063e Reviewed-on: https://review.coreboot.org/c/coreboot/+/34447 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-233rdparty/blobs: Update submoduleJulius Werner
Uprev the 3rdparty/blobs submodule to the newest HEAD, which contains the SSPM binary for MT8183 platforms ( https://review.coreboot.org/c/blobs/+/32698 ). Change-Id: I8a4dfa7eaace1ea473f5970596c3201342e48927 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34494 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-23include/spi-generic: Append unit to macro namesUwe Poeche
This patch appends a unit (milliseconds) to time-out macro names for better understanding the code which is using the macros. Change-Id: Ibc4beda2660a83fd5f0ed325b2ee3148c6d96639 Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34384 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-23sb/intel/common/spi: Increase flash erase timeoutUwe Poeche
This patch provides an increased timeout (60ms -> 1s) for SPI HW-sequencing flash erase operations. Without that the erase for MRC cache writing on siemens/mc_bdx1 sometimes goes wrong because the timeout stops waiting for flash cycle completion. It was found during continuous integration. Investigation showed that the used flash type takes sporadic (e.g. 5% of the test cycles) more time for completion of erasing operation if the ambient temperature increases. The measured time values are in range of data sheet of SPI flash. 60ms is a typical value. So increasing the value is necessary. tested on siemens/bdx1; measured time values with increased ambient temperature of flash were always smaller than worst case value of 1s. Change-Id: Id50636f9ed834ffd7810946798b300e58b2c14d2 Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-23include/spi-generic: move common flash timeoutsUwe Poeche
This patch moves SPI_FLASH time-outs from spi/spi_flash_internal.h for SPI SW-sequencing to include/spi-generic.h to provide also for SPI HW-sequencing. tested on siemens/bdx1 and checked if all includes of spi_flash_internal.h on other places provide an include of spi-generic.h before Change-Id: I837f1a027b836996bc42389bdf7dbab7f0e9db09 Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-23mb/google/octopus/variants/fleex: Remove gpio NC setting for enabling I2C0Frank Wu
Enable I2C0 in fleex then verify EMR function successfully BUG=b:135968368 BRANCH=octopus TEST=EMR function working normally with I2C0 in Grob360S. Change-Id: I784ff32418bc839bcec14fbfd7236f708828690e Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-07-23vboot: relocate call to vboot_save_recovery_reason_vbnvJoel Kitching
Relocate call to vboot_save_recovery_reason_vbnv and rename vb2_clear_recovery_reason_vbnv for consistency. BUG=b:124141368, b:124192753 TEST=make clean && make test-abuild BRANCH=none Change-Id: I111cc23cf3d4b16fdb058dd395ac17a97f23a53f Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-23vboot: deprecate vboot_handoff structureJoel Kitching
vboot_handoff is no longer used in coreboot, and is not needed in CBMEM or cbtable. BUG=b:124141368, b:124192753 TEST=make clean && make runtests BRANCH=none Change-Id: I782d53f969dc9ae2775e3060371d06e7bf8e1af6 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33536 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-23util/*/Makefile: Rename -W to -WextraJacob Garber
-W is the old name for -Wextra, so let's rename it to be consistent with the rest of the utility Makefiles. Change-Id: I0e50f13d2617b785d343707fc895516574164562 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34455 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-23libpayload/libc: Use size_t for lengths and indicesJacob Garber
size_t is the natural integer type for strlen() and array indices, and this fixes several integer conversion and sign comparison warnings. Change-Id: I5658b19f990de4596a602b36d9533b1ca96ad947 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33794 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-23libpayload/libc: Tidy utf16le_to_asciiJacob Garber
- Constify the string argument - Change int to size_t, which is what xmalloc expects Change-Id: I8b5a13319ded4025f883760f2b6d4d7a9ad9fb8b Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-23libpayload/libc: Correct strlcat return valueJacob Garber
The documented return value for strlcat is horribly wrong, as is the return value itself. It should not return the number of appended bytes, but rather the length of the concatenated string. From the man page: The strlcpy() and strlcat() functions return the total length of the string they tried to create. For strlcpy() that means the length of src. For strlcat() that means the initial length of dst plus the length of src. While this may seem somewhat confusing, it was done to make truncation detection simple. This change is more likely to fix existing code than break it, since anyone who uses the return value of strlcat will almost certainly rely on the standard behaviour rather than investigate coreboot's source code to see that we have a quirky version. Change-Id: I4421305af85bce88d12d6fdc2eea6807ccdcf449 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-23src/lib/hexdump: Use size_t for indicesElyes HAOUAS
Spotted out using -Wconversion gcc warning option. Change-Id: I29a7ae8c499bb1e8ab7c8741b2dfb7663d82a362 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
2019-07-23mb/google/hatch: Add FP MCU to helios device treePhilip Chen
BUG=b:136606255 Change-Id: I8fa29dc96e7a066f6708ede6b7bee2382c7008cb Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-23mediatek/mt8183: Add md power-off flowYanjie Jiang
SRCCLKENA holds 26M clock, which will fail suspend/resume, and the SRCCLKENA is not used by mt8183, so we can simply release it for suspend/resume to work. BUG=b:80501386 BRANCH=none Test=Boots correctly on Kukui, suspend test pass. Change-Id: Ib6e11faeb6936a1dd6bbe8b1a8b612446bf51082 Signed-off-by: Yanjie.jiang <yanjie.jiang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32666 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-22Documentation: Add 4.10/4.11 release notesPatrick Georgi
For 4.11 that's obviously just the release notes template. Change-Id: I44c15bcaedf1367d745c533cc0a4acebdd2f812e Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-07-22soc/mediatek/mt8183: Support SSPMErin Lo
SSPM is "Secure System Power Manager" that provides power control in secure domain. The initialization flow is to load SSPM firmware to its SRAM space and then enable. BUG=b:80501386 BRANCH=none Test=Build pass Change-Id: I4ae6034454326f5115cd3948819adc448b67fb1c Signed-off-by: Erin Lo <erin.lo@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31516 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-22soc/intel/broadwell: Change variable back to u32Jacob Garber
commit bde6d309df (x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointer) accidentally changed the type of reg32 to a u8 *, so change it back to a u32. Change-Id: If6beff17ed3ddf85889aba5f41d1ba112cd74075 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1402160 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-21mediatek/mt8183: support more EMCP LPDDR4X DDR bootupHuayang Duan
Support SANDISK SDADA4CR-128G, SAMSUNG KMDP6001DA-B425, KMDV6001DA-B620 EMCP LPDDR4X DDR bootup. BUG=b:80501386 BRANCH=none TEST=Boots correctly on EMCP DRAM Change-Id: I7de4c9a27282d3d00f51adf46dcb3d2f3984bfff Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-07-21mb/google/kukui: Introduce a new 'Jacuzzi' familyHung-Te Lin
The 'Jacuzzi' is a different base board that will share most of Kukui design. For AP firmware, there will be only a few changes expected, mostly in display (for MIPI bridge) and EC/keyboard so we want to create it as variants inside Kukui folder, not forking a new directory. BUG=b:137517228 TEST=make menuconfig; select 'krane' and build; select 'jacuzzi' and build. Change-Id: Ic2b04e01628dc3db40f79f9bbdd5cc77d9466753 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34344 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-21mediatek/mt8183: Calibrate RTC eosc clockRan Bi
Calibrate RTC eosc clock which will be used when RTC goes into low power state. BUG=b:133872611 BRANCH=none TEST=Boots correctly on Kukui Change-Id: Ie8fd6f4cffdcf7cf410ce48343378a017923789c Signed-off-by: Ran Bi <ran.bi@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-07-21src/cpu/intel: Add sanity check for cpu turbo mode capabilityJohn Zhao
It is proper to check cpu turbo mode capability after it is selected to be enabled. If processor exhibits the presence of hardware support for turbo, turbo global state will be updated with TURBO_ENABLE. Otherwise, TURBO_UNAVAILABLE is applied to turbo global state. TEST=Validated turbo state on GLK and WHL devices. Change-Id: Ib1bc37fb339b4a0bb6a7cdc6cd4391575b22b55a Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34145 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-21MAINTAINERS: Add Portwell M107 maintainersFrans Hendriks
Add maintainers to Portwell PQ-M107 boards. BUG=N/A TEST=N/A Change-Id: I9171a9dd56bba7cc4836a7d2c2e314b910229cb9 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34445 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-07-21soc/intel: Expand SA_DEV_ROOT for ramstageKyösti Mälkki
We do not want to disguise somewhat complex function calls as simple macros. Change-Id: I298f7f9a1c6a64cfba454e919eeaedc7bb2d4801 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-21soc/intel: Change file to __SIMPLE_DEVICE__Kyösti Mälkki
All the PCI accesses in the file are now accessed without SA_DEV_ROOT expanding to function call. Change-Id: I30d331e9c18a486ea971e8397a6e20a0f82d5f84 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-21soc/intel: Fix chip_info for PCH_DEV_PMCKyösti Mälkki
Since PCH_DEVFN_PMC device is a PCI device that may be hidden from enumeration, use SA_DEVFN_ROOT instead to locate the SOC configuration. Change-Id: I4b5195827fb32ec1dbd0bd6c9e243f4f9a4775ca Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34327 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-21util/cbfstool/flashmap: Fix memory leaks on failureJacob Garber
Fix several memory leaks on failed printing or tests. These don't matter much, but it keeps Coverity happy. Change-Id: Ie750acb50ae1590c3aea533338a8827c03459c1a Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 130245{1,2,3} Reviewed-on: https://review.coreboot.org/c/coreboot/+/34412 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-21mb/google/hatch: Remove hatch_whlPhilip Chen
Hatch_whl variant is deprecated. BUG=b:137180390 Change-Id: I88fa201398ad5fb70da48d022f1ae86fecafa660 Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34432 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-21mainboard/google/kahlee: create treeya variantChris Wang
This is based on the grunt variant. BUG=b:135551210 BRANCH=none TEST=emerge-grunt coreboot chromeos-bootimage Ensure that image-treeya.*.bin are created Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I40f3c9de87350777b02dd91d8c5b9dbe2eb9f6b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34435 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-21soc/intel/common: gpio_defs: set trig to disable in PAD_CFG_GPO*Maxim Polyakov
According to the documentation [1], by default the RX Level/Edge Trig Configuration set to disable (2h = Drive '0') for each pad. Since this setting doesn't matter for the GPO pad, there is no need to change the default value for such pads. The patch updates PAD_CFG_GPO* macros to set trig to disable. It also resolves some problems of creating the PCH/SoC pads configuration based on information from the inteltool dump [2,3] [1] page 1429,Intel (R) 100 Series and Intel (R) C230 Series PCH Family Platform Controller Hub (PCH), Datasheet, Vol 2 of 2, February 2019, Document Number: 332691-003EN https://www.intel.com/content/dam/www/public/us/en/documents/ datasheets/100-series-chipset-datasheet-vol-2.pdf [2] https://review.coreboot.org/c/coreboot/+/34337 [3] https://github.com/maxpoliak/pch-pads-parser/issues/1 Change-Id: I39ba83ffaad57656f31147fc72d7a708e5f61163 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-21soc/intel/common: add PAD_CFG_NF_BUF_TRIG macroMaxim Polyakov
In the case there is no the circuit diagram for motherboard, the PCH/SoC GPIOs config is based on information from the inteltool dump. However, available macros from gpio_defs.h can't define the pad configuration from this dump: 0x0440: 0x0000002084000500 GPP_A8 CLKRUN# 0x0448: 0x0000102184000600 GPP_A9 CLKOUT_LPC0 0x0450: 0x0000102284000600 GPP_A10 CLKOUT_LPC1 To convert these raw DW0/DW1 register values to macros, the following parameters must be set: func - pad function, pull - termination, rst - pad reset config, trig - rx level/edge configuration, bufdis - rx/tx (in/output) buffer disable. The patch resolves the above problem by adding a new macro for the native function configuration: PAD_CFG_NF_BUF_TRIG(pad, pull, rst, func, bufdis, trig) These changes were tested on Asrock H110M-DVS motherboard [2]. It also resolves the problem of automatically creating pads configuration [3,4] [1] page 1429,Intel (R) 100 Series and Intel (R) C230 Series PCH Family Platform Controller Hub (PCH), Datasheet, Vol 2 of 2, February 2019, Document Number: 332691-003EN https://www.intel.com/content/dam/www/public/us/en/documents/ datasheets/100-series-chipset-datasheet-vol-2.pdf [2] https://review.coreboot.org/c/coreboot/+/33565 [3] https://github.com/maxpoliak/pch-pads-parser/issues/1 [4] https://github.com/maxpoliak/pch-pads-parser/commit/215d303 Change-Id: If9fe50ff9a680633db6228564345200c0e1ee3ea Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34337 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-21mb/google/hatch/var/kindred: Implement variant_devtree_update()David Wu
This change provides an implementation of variant_devtree_update() for kindred that disable eMMC controller when SKU ID = 1 or 3 BUG=b:132918661 TEST=Verify eMMC is disabled when SKU ID = 1 or 3 Change-Id: I8ccb4dae54f223881e0ced9e034bf45b994cc6f2 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-07-21mb/google/hatch: expose get_board_sku() as globalDavid Wu
BUG=None TEST=emerge-hatch coreboot chromeos-bootimage Change-Id: I217e13acd337034554ff055e8bf5011558d1f8bf Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-21mb/google/hatch: Add support for variant_devtree_update()David Wu
This change adds support for variant_devtree_update() that allows variant to update device tree. BUG=None TEST=emerge-hatch coreboot chromeos-bootimage Change-Id: I0e9ad360b6c02c83fe49387ce7bc66d56448ffb9 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34399 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-21mb/google/eve: Enable wake from MKBP events in S3Aseda Aboagye
We would like to wake eve up in suspend from an MKBP event. This commit simply enables MKBP events to wake the system in suspend using the existing host event interface. There is an accompanying series of patches in the EC firmware for eve that will allow a MKBP wake mask to be configured. BUG=chromium:786721 BRANCH=firmware-eve-9584.B TEST=Build and flash eve, generate MKBP events on the EC and verify that the system wakes up in suspend. Change-Id: I75b05c83a4204d55df11589299a7488d04bbd073 Signed-off-by: Aseda Aboagye <aaboagye@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34454 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-21soc/intel/skylake: Enable Energy/Performance Bias controlMatthew Garrett
Bit 18 of MSR_POWER_CTL is documented as reserved, but we're setting it on Haswell in order to enable EPB. It seems to work on SKL/KBL as well, so do it there too. Signed-off-by: Matthew Garrett <mjg59@google.com> Change-Id: I83da1a57a04dac206cc67f2c256d0c102965abc2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34458 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-21soc/amd/picasso: Remove dead SPD size Kconfig symbolMarshall Dawson
DIMM_SPD_SIZE is no longer used and should have been removed in 78025f6 "soc/amd/picasso: Remove all AGESA references". Change-Id: Iae15998835e4d8afdb44cca77d2c9009b7e3947a Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-21soc/amd/picasso: Enable stage cache only with ACPI resumeMarshall Dawson
Make the option match the change in I7c3b3ec. "stoneyridge/Kconfig: Enable stage cache based on HAVE_ACPI_RESUME" Change-Id: I7fa13428ec0119b61f429116a52986067e833bdf Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34418 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-21pci_ids: Add AMD Family 17h host bridgeMarshall Dawson
Add the ID for Picasso's D0F0. Change-Id: Id83dfecd628a6ee67bf61e390569da6cfc455a7d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34417 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-21nb/amd/trinity: Rename PCI ID of the IOMMUMarshall Dawson
Make the Trinity IOMMU ID naming consistent with other products. Change-Id: Id5a03d44a2ca21061bb22f9e61b26e42d91f9d96 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-07-21pci_ids: Reorder AMD internal northbridge and IOMMU IDsMarshall Dawson
Put the devices in Family/Model order instead of a mostly chronological order. Change-Id: I425736012b3bb68c9e0b417e90ff5261d1193aba Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-21soc/amd: Move SPI base alignment define into commonMarshall Dawson
The decision to leave the alignment in stoneyridge was driven because of a spec difference with picasso. AMD has checked the design materials and has confirmed there was no change. TEST=Build Grunt successfully BUG=b:130343127 Change-Id: If3a1d5a41dc175c9733fd09ad28627962646daf9 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34414 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-21libpayload: Enable -Wimplicit-fallthroughJacob Garber
Add comments to intentional fall throughs and enable the warning. Change-Id: I93e071c4fb139fa6e9cd8a1bfb5800f5f4eac50b Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-20mb/,sb/intel/i82801gx: Merge `ide_legacy_combined` into `sata_mode`Nico Huber
Functional changes were already done in 5eb81bed2e (sb/intel/i82801gx: Detect if the southbridge supports AHCI) but we forgot to update the `chip.h` and devicetrees. Change-Id: I0e25f54ead8f5bbc6041d31347038e800787b624 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34462 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-16 11:00:53 +0000