summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-09-21mb/google/{poppy,soraka}: Enable LTR for Root portRizwan Qureshi
Enable LTR for Root port 0, where wifi card is connected. BUG=b:65570878 TEST=After enbaling LTR on port 0 on the MB devicetree, No errors reported by AER driver for root port 0. Change-Id: I222a87fe2094c8424760ccf578e32b9ac042f014 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/21548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rajat Jain <rajatja@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-21soc/intel/skylake: Add config for enabling LTR for PCIe Root portRizwan Qureshi
There are a lot errors reported by AER driver for root port 0. The erors are being caused by an unsupported request from the device to the upstream port. Enabling LTR on the root port stops these errors, it is because LTR is enabled on the device side but not on the root port and hence root port was logging the LTR messages from the device as unsupported. The PCIe base spec (v3.1a) section 6.18 also states that: LTR support is discovered and enabled through reporting and control registers described in Chapter 7. Software must not enable LTR in an Endpoint unless the Root Complex and all intermediate Switches indicate support for LTR. Note that it is not required that all Endpoints support LTR to permit enabling LTR in those Endpoints that do support it. When enabling the LTR mechanism in a hierarchy, devices closest to the Root Port must be enabled first. If an LTR Message is received at a Downstream Port that does not support LTR or if LTR is not enabled, the Message must be treated as an Unsupported Request. FSP has a UPD for enabling/disabling LTR on root port, use the same for configuring LTR on PCIe root ports. BUG=b:65570878 TEST=After enbaling LTR on port 0 on the MB devicetree, No errors reported by AER driver for root port 0. Change-Id: Ica97faa78fcd991dad63ae54d2ada82194b4202a Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/21547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-21soc/intel/cannonlake: Remove old soc_get_rtc_failed functionMartin Roth
In coreboot commit bcd0bdabed (soc/intel/cannonlake: add rtc failure checking), the function soc_get_rtc_failed was supposed to be moved, but the old function was not removed, causing a build error. BUG=b:63054105 Change-Id: I31c1966af413df3f5a5492a5dd891a6eb26a1fc4 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-20vboot: reset vbnv in cmos when cmos failure occursAaron Durbin
There's an occasional issue on machines which use CMOS for their vbnv storage. The machine that just powers up from complete G3 would have had their RTC rail not held up. The contents of vbnv in CMOS could pass the crc8 though the values could be bad. In order to fix this introduce two functions: 1. vbnv_init_cmos() 2. vbnv_cmos_failed() At the start of vboot the CMOS is queried for failure. If there is a failure indicated then the vbnv data is restored from flash backup or reset to known values when there is no flash backup. BUG=b:63054105 Change-Id: I8bd6f28f64a116b84a08ce4779cd4dc73c0f2f3d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-20vboot: expose vbnv_reset() functionAaron Durbin
It's helpful to use the common vbnv_reset() function to initialize the vbnv contents when backing store failures occur. Therefore, allow that to happen. BUG=b:63054105 Change-Id: I990639e8c163469733fdab0d3c72e064acc9f8d8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-20southbridge/intel/bd82x6x: refactor rtc failure checkingAaron Durbin
In order to prepare for checking RTC failure in the early boot paths move the rtc failure calculation to early_pch_common.c and add a helper function to determine if failure occurred. BUG=b:63054105 Change-Id: I710d99551cfb6455244f66b47fcbecc790ae770f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21558 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-20southbridge/intel/lynxpoint: refactor rtc failure checkingAaron Durbin
In order to prepare for checking RTC failure in the early boot paths move the rtc failure calculation to pmutil.c and add a helper function to determine if failure occurred. BUG=b:63054105 Change-Id: I368c31b9935c0fa9e8a1be416435dd76f44ec1ec Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-20soc/intel/braswell: refactor rtc failure checkingAaron Durbin
In order to prepare for checking RTC failure in the early boot paths move the rtc failure calculation to pmutil.c and add a helper function to determine if failure occurred. BUG=b:63054105 Change-Id: Ic4bf99dc3a26fbc3bd508e484963b9298ef1b24b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-20soc/intel/baytrail: refactor rtc failure checkingAaron Durbin
In order to prepare for checking RTC failure in the early boot paths move the rtc failure calculation to pmutil.c and add a helper function to determine if failure occurred. BUG=b:63054105 Change-Id: I1d90cc557225ddbba1787bf95eae0de623af487e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21555 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-20soc/intel/skylake: refactor rtc failure checkingAaron Durbin
In order to prepare for checking RTC failure in the early boot paths move the rtc failure calculation to pmutil.c and add a helper function to determine if failure occurred. BUG=b:63054105 Change-Id: I88bf9bdba8c1f3a11bc8301869e3da9f033ec381 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21554 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-20soc/intel/cannonlake: add rtc failure checkingAaron Durbin
In order to prepare for checking RTC failure in the early boot paths move the rtc failure calculation to pmutil.c and add a helper function to determine if failure occurred. In addition actually provide soc_get_rtc_failed() which properly indicates to the common code that RTC failure did occur in the cmos_init() path. BUG=b:63054105 Change-Id: I9dcb9377c758b226ee7bcc572caf11b7b2095425 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-20soc/intel/broadwell: refactor rtc failure checkingAaron Durbin
In order to prepare for checking RTC failure in the early boot paths move the rtc failure calculation to pmutil.c and add a helper function to determine if failure occurred. BUG=b:63054105 Change-Id: Ia0a38f00d2a5c7270e24bdd35ecab7fbba1016d4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-20soc/intel/apollolake: refactor rtc failure checkingAaron Durbin
In order to prepare for checking RTC failure in the early boot paths move the rtc failure calculation to pmutil.c and add a helper function to determine if failure occurred. BUG=b:63054105 Change-Id: I1b02028a1830ff9b28b23da7a4a1fd343f329f0d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-20vboot: introduce vbnv_init()Aaron Durbin
Add vbnv_init() which is responsible for doing any vbnv initialization and reading the vbnv contents. Having this function allows for putting vbnv backing store specific support in the main vboot logic path. BUG=b:63054105 Change-Id: Id8f0344e5de5338417ae2e353ae473d6909c860a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21550 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-20vboot: remove init_vbnv_cmos()Aaron Durbin
Instead of having each potential caller deal with the differences of cmos_init() and init_vbnv_cmos() when VBOOT is enabled put the correct logic within the callee, cmos_init(), for handling the vbnv in CMOS. The internal __cmos_init() routine returns when the CMOS area was cleared. BUG=b:63054105 Change-Id: Ia124bcd61d3ac03e899a4ecf3645fc4b7a558f03 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21549 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-20google/kahlee: Prevent AGESA memory clearMarc Jones
The Linux Pstore area must not be cleared on a reboot. Set the option to not clear the memory in AGESA. BUG=b:64193190 BRANCH=none TEST=Memory clear isn't called in AGESA. Change-Id: I9b8286ade718fa80bf3badd478ab9a7df643ab98 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/21596 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-20google/kahee: Fix number of memory channelsMarc Jones
Kahlee has a single memory channel, not two. This corrects DMI type 17 reporting and the memory clear functions. BUG=b:65403853, b:64193190 BRANCH=none TEST=AGESA DMI reports the correct number of DIMMs. Change-Id: Ic263d2677a480448beaf3850391b1a3d4ed38657 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/21595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-20util/cbfstool: Add "expand" command to make CBFS span an fmap regionPatrick Georgi
vboot images come with multiple regions carrying CBFS file systems. To expedite hashing (from slow flash memory), the FW_MAIN_* regions are truncated since they typically have pretty large unused space at the end that is of no interest. For test purposes it can be useful to re-engage that space, so add a command that creates a new empty file entry covering that area (except for the last 4 bytes for the master header pointer, as usual). BUG=b:65853903 BRANCH=none TEST=`cbfstool test.bin expand -r FW_MAIN_A` creates a new empty file of the expected size on a Chrome OS firmware image. Change-Id: I160c8529ce4bfcc28685166b6d9035ade4f6f1d1 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21598 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-20util/docker: Update coreboot-sdk dockerfileMartin Roth
- Fix typo in comment - Aphabetize package list and put each package on a single line - Add environment variables into coreboot user's .bashrc file - Add openssl, qemu, and shellcheck to installed packages Change-Id: I37771be5d3ecaa61d76d99e689b422144a6d7dc6 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/21582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Chris Ching <chingcodes@chromium.org>
2017-09-20util/lint: update checkpatch & spelling.txt to upstream versionsMartin Roth
- Update checkpatch.pl to version 0547fa58 (checkpatch: add 6 missing types to --list-types) - Update spelling.txt to version d9f91f8 (scripts/spelling.txt: add a bunch more spelling mistakes) - Fix an additional unescaped left brace in a regex - causes warnings in new versions of perl. Change-Id: Ic443099e90a46280f18d58799afc72d00dc83793 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/21581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Chris Ching <chingcodes@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-09-20device/dram/ddr2.c: Improve error returning and debug outputArthur Heymans
This patch outputs decoding errors with BIOS_WARNING instead of depending on CONFIG_DEBUG_RAM_SETUP. Returns SPD_STATUS_INVALID on invalid settings for tRR, bcd and tCK and doesn't try to create a valid setting if an invalid setting is detected. Change-Id: Iee434d1fa1a9d911cc3683b88b260881ed6434ea Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/21480 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-09-20nb/i945/raminit: Use common ddr2 decode functionsArthur Heymans
This simplifies computing dram timings a lot. This removes computation of rank size based on columns, rows, banks,... and uses the information in SPD byte 31. The result of this is that dimms with multiple asymmetric ranks are not supported anymore. These however are very rare and most likely never tested on this platform. This also uses i2c block read instead of byte read to speed up the raminit. The result is less time is being spend reading SPDs. It still keeps smbus read byte as a backup if i2c block read were to fail. Change-Id: I97c93939d11807752797785dd88c70b43a236ee3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-09-20board_status: Tell user where to find output when results are uploadedDavid Hendricks
If results are uploaded the temporary directory in which they are stored gets deleted, yet we currently point to the deleted directory in the output. This patch fixes it so that we point to the actual location in the local repository where uploaded results are found. Change-Id: I1f42c3296ec1d19fcfa4911307e07e67de289895 Signed-off-by: David Hendricks <david.hendricks@gmail.com> Reviewed-on: https://review.coreboot.org/21415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-20soc/intel/cannonlake: Add PMC pci driversLijian Zhao
Add PMC pci driver on top of PMC common code, also include pmc init code reference from skylake. Change-Id: I95895a3e26cdebd98a4e54720bd4730542707d7e Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-20nb/intel/i945/early_init.c: Replace numbers with macrosElyes HAOUAS
Change-Id: I270d17a2eff2c6664bf936425a6ed344be3feabe Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/21524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-09-19mainboard/intel/cannonlake_rvp: Add PCI, PCIE IRQs to DSDT tableBora Guvendik
Change-Id: Id0b2b9e9ae2755ed89cee337a1a085fc4e95b073 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/21531 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-19soc/intel/cannonlake: Add PCIE IRQsBora Guvendik
Change-Id: Iea99baaa58d2212e7d09a19aaac9d303226f7c5e Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/21530 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-19soc/intel/common/block: Add pci device id for CNL-YBora Guvendik
Change-Id: I2820a39a34a80d066ca5cb364f67dbde0203803e Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/21561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-19AGESA binaryPI: Clean up amdfamXX.h includeKyösti Mälkki
Change-Id: Iba8b8d33e1f10e28745234988d97d4fafd04c798 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-09-19ec/quanta/it8518: add missing HID to SIO deviceMatt DeVillier
The ACPI spec requires devices with children to have an HID, and Windows enforces this strictly. Without the SIO device having an HID, Windows will not detect the attached PS2 keyboard and trackpad. Therefore, add the proper HID. TEST: boot Windows on google/stout, observe PS2 keyboard and trackpad detected and functional. Change-Id: I61d7341c15483f8e1fe0e485a25591ceb92eaae1 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21580 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-19ec/quanta/it8518: correct ACPI battery data fed into ToString()Matt DeVillier
ToString() requires the input buffer data to be null-terminated, but the data returned by the EC is not, leading Windows to fail to report any battery data at all. Correct this by concatenating a null terminator (0x00) to the end of the buffer data before inputting to ToString() where needed TEST: boot Windows on google/stout, observe battery data reported correctly. Change-Id: I974afcd6ff1c617301d0897d6bd1fe14200aa3b9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21579 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-19ec/purism/librem: fix battery present rateMatt DeVillier
EC ACPI code is calculating the drain rate, but does not store it in the battery status package before returning it. Correct this omission, and set the drain rate to a preset minimum if calculated value is less. Taken from vendor firmware ACPI dump. Change-Id: I52837d5879112ab3103976bda28906fac8f880ec Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Youness Alaoui <snifikino@gmail.com>
2017-09-19sb/intel/bd82x6x: Add awareness of ME's Alt Disable ModeNathaniel Roach
me_cleaner now allows setting a bit in the PCH straps - AltMeDisable tells the ME to stop execution after BUP - disabling the 30 minute watchdog - but also "breaking" the ME. The ME reports opmode = 2. This means the ME will not respond when we wait for an acknowledgement about the DRAM being ready. The current code waits 5 seconds for a response, that in this case, never comes. If the ME is reporting opmode 2, don't delay or wait for a response from the ME. Tested on my X220, this patch fixed the five seconds before the payload executed. Verified using the timestamp patch. Change-Id: Ifdda6b2dbb8ae3a650be6d5df6c60475a3fa74aa Signed-off-by: Nathaniel Roach <nroach44@gmail.com> Reviewed-on: https://review.coreboot.org/21466 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-09-19amd/stoneyridge: Add northbridge definitionsMarshall Dawson
Begin adding D18F1 definitions to northbridge.h. Change-Id: I4fa2f9a4af8fbb3c2919ffb5dca34cbe333bc958 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-17ifdtool: Refactor some codeBill XIE
Add find_fcba(), find_frba(), find_fmba(), find_fpsba() and find_fmsba() to replace those copy-pasted addressings. This commit is one separated from the original I6d05418c. Change-Id: I98965711e4cb9792e5cc86cc4c1035559e0274f5 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/21511 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-09-17ifdtool: redesign some structuresBill XIE
Redesign some array-like structures as true arrays, and rewrite functions to dump them as loops. This commit is one separated from the original I6d05418c. Change-Id: I161c9a2ae83d26e658d67d0804e943fff95fe076 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/21510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-09-17ifdtool: merge region_filenames with region_name(s)Bill XIE
There is no reason to keep a separate region_filenames array, so I merge it into region_name(s). This commit is one separated from the original I6d05418c. Change-Id: I38489c6d3b3c161e9b0281188e6cdd0b62e38335 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/21509 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-17ifdtool: Const-correct and redesign some functionsBill XIE
Const-correct some functions which do not write back, and use pointers to access existing region_t variables. The last changeset is dismantled this time. This commit is only focused on const-correctness. Change-Id: I6d05418c8b32fa31dcd038a3e56f9aefe13fa9c4 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/21288 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-17board_status: Add option to set cbmem pathDavid Hendricks
This allows the user to specify a custom path for cbmem on the DUT. Change-Id: I2c28737d6efaae238fd6831cd3d00b2142b39a4c Signed-off-by: David Hendricks <david.hendricks@gmail.com> Reviewed-on: https://review.coreboot.org/21565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-17cpu/x86/sipi_vector.S: Use correct op suffixDamien Zammit
clang wont compile `cmp` asm opcode because it's ambiguous, use the correct op suffix `cmpl` Change-Id: I82da5a9065b382e182dc7d502c7dca2fc717543b Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/21359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-17via/cn700: Fix clang error with missing mainDamien Zammit
According to clang, main has no prototype for bcom/winnetp680 so add it into corresponding raminit.h Change-Id: I8a55267901986757a4fa88ee13460ffbed3eeadc Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/21356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-16mb/google/poppy: Add lens_focus property for OV13858 camera moduleV Sowmya
Add lens_focus property with reference to VCM device for OV13858 camera module to register the corresponding v4l2 sub-device asynchronously. BUG=b:64133998 BRANCH=none TEST=Build and boot soraka. Dump DSDT and verified that it has the required entries and verified the camera functionality. Change-Id: Ib22403f668dd07d6b9226fe2c22b533223b69473 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/21512 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-16google/lulu,gandof: set kb backlight on bootMatt DeVillier
Set keyboard backlight to 75% on boot, except when resuming from S3. This enables the backlight at a reasonable level prior to the OS driver taking over, providing early proof-of-life and enhanced usability in grub etc. Uses same method as other google boards with a keyboard backlight (chell, link, samus). 75% value determined based on user feedback. TEST: boot google/lulu,gandof boards, observe keyboard backlight enabled in pre-OS environment. Change-Id: I7ed59289419af21764b1b5bd0a534d3b630c6c6b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-16soc/intel/common: smm.h: Fix copyright yearJonathan Neuschäfer
Intel obviously didn't exist in 201 :-) Change-Id: I230d3b92ec6832fcea056fd3d099147002274d73 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-16payloads/external: Clone GRUB2 over HTTPSJonathan Neuschäfer
Since the git:// protocol is unencrypted and unauthenticated, there's a security risk associated with using it: A man-in-the-middle attacker could replace e.g. the master branch with malicious code. Mitigate this risk somewhat by cloning GRUB2 via HTTPS. Change-Id: Ice8f8d108e7dfa1a1ecd58d9735944fa9570ace8 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-09-16google/reks: add new board as variant of cyan baseboardMatt DeVillier
Add support for google/reks (Lenovo Chromebook N22/N42) as a variant of the cyan Braswell basebaseboard. - Add board-specific code as the new reks variant - Add new I2C touchscreen device and SPD files to the baseboard for potential reuse by other variants Sourced from Chromium branch firmware-reks-7287.133.B, commit 7d812d4: Revert "Revert "soc/intel/braswell: Populate NVS SCC BAR1"" Change-Id: Iac9e2b5661aa33e12927f4cb84ebaee36522a385 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21128 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-16google/edgar: add new board as variant of cyan baseboardMatt DeVillier
Add support for google/edgar (Acer Chromebook 14 CB3-431) as a variant of the cyan Braswell basebaseboard. - Add board-specific code as the new edgar variant - Add common code to the baseboard which will apply to all variants other than cyan Sourced from Chromium branch firmware-edgar-7287.167.B, commit 2319742: Edgar: Add Micron MT52L256M32D1PF-107 SPD data Change-Id: I58548cbbc85828f37c0023e8aa9e09bdca612659 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-16mainboard/intel/glkrvp: Add support for audioHannah Williams
This patch adds the below: 1) Add correct SSP endpoint config for spk and headset 2) Update GPIO config for jack detection 3) Update GPIO config for I2S pins TEST=sound card binds TEST=cross checked SSDT entries from /sys/firmware/acpi/tables/ TEST=Jack interrupt works Change-Id: I32022ddacd79917730080889c040f842e0c9e6b9 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/19799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-16soc/intel/apollolake: Leave Hda enabled for GLKHannah Williams
Audio was disabled during initial stages, this patch enables back. It was disabled to unblock other validation tests. TEST=lspci lists audio controller Change-Id: I5d3872e86623763e20ee6464897f47792c731642 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/21529 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-16device/dram/ddr2: Fix decoding tRRArthur Heymans
Bit 7 is set on all options so only the default option in the switch statement is returned. Change-Id: I6a698ec9c15a2611a34c5965edf93638553775f0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/21457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-15mainboard/intel/cannonlake: Add ec entry into flashmapLijian Zhao
Add EC entries into chromeos.fmd file. BRANCH=None BUG=None TEST=Flash image and confirm system can get out of reset successfully. System will not be able to reach reset vector if flash map described in coreboot does not match intel flash map generated from fit. Change-Id: Ic18ce59941b4ff8171fe661d332e3e521d988341 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21526 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-15util/scripts/cross-repo-cherrypick: improve cros-side rewritePatrick Georgi
Sometimes the BUG/BRANCH/TEST metadata isn't separated by a newline from the later git/gerrit metadata, which messes up further processing. Add that newline to minimize the amount of human intervention required. Change-Id: I37171bf6764b64e0ab0e81297a03f4d8b7744256 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21534 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-15soc/amd/stoneyridge: Improve code qualityRichard Spiegel
Remove empty functions. In function pointer structure "device_operations", replace the 0 equality by NULL equality. Files: hda.c, sata.c and usb.c Change-Id: I9f8dc7681ab2e651872e69a8b2e990e59ebe80c9 Signed-off-by: Richard Spiegel <richard.spiegel@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/21522 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-15mb/google/poppy: enable AER for PCIe root port 0Rizwan Qureshi
Enable PCIe Advanced Error Reporting for PCIe root port 0. BUG=b:64798078 TEST="lspci" shows that AER is enabled in the capabilities list. Change-Id: I8a818a9539b8d4f103d551ffd59713c9bbbc13ce Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/21425 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-15soc/intel/skylake: Move UNCORE PRMRR base and mask defines.Pratik Prajapati
UNCORE PRMRR BASE and MASK MSRs are not common, so move to SOC specific header file and rename the #define to start with MSR_* Change-Id: I799c43f0b7a9eec5b3b69ab0f5100935c7f3f170 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21247 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-15soc/intel/common/sgx: use SOC specific API to get PRMRR base and maskPratik Prajapati
Use soc_get_uncore_prmmr_base_and_mask() API to get PRMRR base and mask. Change-Id: I2fd96607c4f5fed97e38087b60d47d6daacc7646 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21246 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-15soc/intel/common/sgx: Define and use soc_fill_sgx_param()Pratik Prajapati
To remove chip.h dependency from SGX common code - Create API soc_fill_sgx_param() and use it in sgx.c - Implement same API for skylake/kabylake - define sgx_param structure Also include intelblocks/sgx.h instead of soc/msr.h Change-Id: I358f0817bec5dd6cd147a645675b5688969a04e0 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-15MAINTAINERS: Remove extra unnecessary spaceSumeet Pawnikar
Remove extra unnecessary space at end of line. Change-Id: I27688c3b8df71b875f1dc1020465d838756362be Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/21521 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-15MAINTAINERS: Add Julius as LZ4 maintainerJulius Werner
I imported the LZ4 compression code and want to keep an eye on it to ensure that our sources stay in sync with upstream. Change-Id: I249ce24f6630d66d451d993198cd267478e5743e Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/21488 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-15MAINTAINERS: Add INTEL FSP DENVERTON-NS SOC & HARCUVAR CRBMariusz Szafranski
Add Intel FSP Atom C3000 SoC ("Denverton" and "Denverton-NS") and Harcuvar CRB to the list. Change-Id: I1c4bfd0900e8d425b95b5ef6c541b1e988846667 Signed-off-by: Mariusz Szafranski <mariuszx.szafranski@intel.com> Reviewed-on: https://review.coreboot.org/21515 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
2017-09-15google/cyan: convert to variant configurationMatt DeVillier
Setup cyan to be the baseboard for other Google Braswell boards, to be added in subsequent commits: - Keep code common to all Google Braswell boards in the baseboard, and separate out the board-specific bits into the new cyan variant. - Define the I2C ACPI devices such that they can be easily reused for other variants. - Switch the trackpad/touchscreen interrupts from edge to level, for better performance/compatibility, as was done with all previous Google boards. - Add code to the baseboard to allow optional variant-specific parameters to be used for both memory and silicon init. - Remove superfluous includes, replace some hardcoded values with variables, and correct typos/formatting errors. Change-Id: Iabbbad16efa9cfa79338f4e94d0771779900d8d9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21126 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-14mainboard/intel/cannonlake_rvp-u: Configure USB portsPratik Prajapati
Configure USB2, USB3 and Type-C ports for CannonLake-U RVP Change-Id: Id875063721ccb62ad4b5187c81f6abf44bf93f74 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21482 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-14mainboard/intel/cannonlake_rvp-y: Configure USB portsPratik Prajapati
Configure USB2, USB3 and Type-C ports for CannonLake-Y RVP Change-Id: Ic3b6b481cb33bfefb267910a5e649877d900d109 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-14src/soc/intel/cannonlake: Define USB configuration paramsPratik Prajapati
Define USB2, USB3 and Type-C configuration for CannonLake. Change-Id: I42243950366d672e886158eb1934350f47b4ff1f Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-14siemens/mc_apl1: Add delay to wait for legacy devicesWerner Zeh
There are old legacy onboard devices which are too slow for a coreboot boot with log level BIOS_ERR. In this case coreboot is so fast that these devices do not have enough time to become visible on the PCI bus and this in turn leads to missing resource allocation for this devices. The most generic way to work around this problem on existing hardware is to introduce a delay right before the PCI enumeration starts. The needed delay time depends on the hardware and will therefore be get from hwinfo. Change-Id: Ia91babc81e3a347bbc498c3def97b2ea70e10922 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/21518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2017-09-14timestamp: Add function to get time since bootWerner Zeh
Add a function to retrieve the elapsed time since boot. For that purpose use the base time in the timestamp table among with the current timestamp at call time of the function. So more precise the returned time is the elapsed time since the timestamp was initialized scaled in microseconds. This was chosen to get a reliable value even on platforms where the TSC might not be reset on software reset or warm start. Change-Id: Ib93ad89078645c0ebe256048cb48f9622c90451f Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/21516 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-14soc/intel/skylake: Implement UNCORE PRMRR get base and mask APIPratik Prajapati
Implement soc_get_uncore_prmmr_base_and_mask() API for SKL/KBL Change-Id: I880d3d88138809cdf030507877079cbea52a0d97 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21245 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-14soc/intel/apollolake: Implement UNCORE PRMRR get base and mask APIPratik Prajapati
Implement soc_get_uncore_prmmr_base_and_mask() API for APL/GLK Change-Id: I57df1f0e8ff984f32de4efdc6ebd68be501b4799 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21244 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-14intel/common/systemagent: Add API to get SOC specific PRMRR base and maskPratik Prajapati
Implement weak definition and SOC specific code would implement actual definition. Change-Id: I5e787a2603aaa475cb5c61558cc31ec0afcb4a8b Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21243 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-14device: acpi_name() should take a const struct deviceAaron Durbin
There's no reason to mutate the struct device when determining the ACPI name for a device. Adjust the function pointer signature and the respective implementations to use const struct device. Change-Id: If5e1f4de36a53646616581b01f47c4e86822c42e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-09-14usbdebug: Fix init and add support for postcarKyösti Mälkki
It was originally designed such that if usbdebug_init() was called before cbmem_initialize(), it would fetch the already-initialized state from CBMEM. This changed when cbmem_find() behaviour changed to require cbmem_initialize() to be called first. As a result, ramstage had to reinitialize all of the EHCI controller and USB endpoints on entry. This was slow, specially with AMD hardware where one can scan USB ports to probe for the debug dongle. For postcar and ramstage, move usbdebug entry such that it is triggered from CBMEM_INIT_HOOK instead of console_init(). Side-effect of this is usbdebug console shows 'coreboot-xxx ... starting...' line only for romstage. Initialisation for usbdebug is never done in postcar. If you have USBDEBUG_IN_ROMSTAGE=n, postcar will not have console output on usb either. While at it, fix also some other __PRE_RAM__ cases to ENV_ROMSTAGE and alike. Change-Id: If8ab973321a801abc5529f3ff68c5dccae9512ad Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21443 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-13soc/intel/cannonlake: Add serialio device configLijian Zhao
Add SerialIO device mode configuration, device mode definition mirrored from FSP. Change-Id: I7009120d69646cf60cb5a622e438ae1eeb6498cf Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21411 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-13AGESA buildsystem: Reduce include path exposureKyösti Mälkki
Remove AGESA_AUTOINCLUDES -list from coreboot proper CPPFLAGS. Couple individual directories are now manually added to complete builds. Change-Id: I2595b87641c70e34e49fedf11b42f4961b0842dd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-13AGESA vendorcode: Remove AGESA_ENTRY_INIT_RECOVERYKyösti Mälkki
Deprecated and not used in our builds. Change-Id: I01773bb62b1599d18ad51d6f444abec46faec942 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-13AGESA vendorcode: Move PlatformInstall.hKyösti Mälkki
All thse Option.*Install.h files are about configuring what eventually is referenced in the final libagesa build. It's self-contained so isolate these together with PlatformInstall.h to hide them from rest of the build. Change-Id: Id9d90a3366bafc1ad01434599d2ae1302887d88c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-13mb/google/soraka: Update DPTF parametersWisley Chen
Cloned from baseboard/dptf.asl and update the parameters for soraka. 1. Update DPTF CPU/TSR0/TSR1/TSR2 passive/critial trigger points. CPU: passive point:85, critial point:100 TSR0: passive point:55, critial point:65 TSR1: passive point:58, critial point:70 TSR2: passive point:60, critial point:75 TSR3: passive point:60, critial point:75 2. Set PL1 Max to 7W, and PL1 Min 4.5W 3. Change sampling period of thermal relationship table (TRT) setting CPU: 5 seconds TSR0: 30 seconds TSR1: 30 seconds TSR2: 8 seconds TSR3: 8 Seconds BUG=b:65467566 TEST=build, boot on soraka, and verified by thermal team. Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Change-Id: I6af93fa358a037df2088213ee4df5e2cfd047590 Reviewed-on: https://review.coreboot.org/21453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-13agesa/f15tn: Remove unnecessary logic opDamien Zammit
One liner that fixes a warning with clang Change-Id: I4d7dfaa5fcf0e95acd650e4c129e0899b5d68f09 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/21361 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-09-13rmodtool: Increase limit on number of symbolsDamien Zammit
An internal index `i` was previously allocated as Elf64_Half which is uint16_t. Bumping to uint64_t increases the number of allowed symbols and prevents a segfault in processing a larger ramstage.debug file. Also introduce a separate counter for the number of sections. Change-Id: I9ad2f64c452cef2e7bf957f766600891cb5ae798 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/21360 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-09-13amd/stoneyridge: Remove duplicate PCI definitionsMarshall Dawson
There were two copies of the same definitions in the file. Change-Id: Iafb10476f32505f6b4ad7b5ba6fa5de2c4648836 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-09-13fsp1_0/fsp_util: Rename global symbol find_fspDamien Zammit
To avoid error with symbol redefinition (using clang): src/drivers/intel/fsp1_0/fsp_util.c:111:22: error: invalid symbol redefinition ".global find_fsp\n\t" Rename the asm global symbol to find_fsp_bypass_prologue and fix jmp. Change-Id: I84c152f9a580fdfc40e9f6e998d2d6484b7f47df Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/21353 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-13mb/google/soraka: Fine-tune USB 2.0 port4Wisley Chen
Fine tune usb 2.0 strength for port 4 to pass eye diagram. BUG=b:65306272 TEST=build on soraka, measure usb2.0 eye diagram, and result is pass. Change-Id: I2c79e96e2e3dea1364d7b71af19b57f4c9307fcb Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/21403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-13nb/intel/i945/raminit.c: Replace numbers with macrosElyes HAOUAS
Use macro instead of numbers Change-Id: Ife1aff0a5cf311881b3a11533b71a74c518a633f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/21472 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-09-13amd/stoneyridge: Remove multi-node supportMarshall Dawson
The Stoney Ridge APU can never be used in a multi-node system. Reduce the feature set to a single node. Remove the static variables for each D18Fn device and replace the routines with coreboot config read and write functions. Strip down domain_set_resources() to consider only a single node. A follow-on patch will further simplify this. Change-Id: I1982b3fbf8dbb44ca75112c57afa59a2b4e4cf5a Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-09-13amd/stoneyridge: Simplify SB link routingMarshall Dawson
Remove the check for the southbridge link from Stoney Ridge. The APU is an SoC which can never be installed in a multi-node system. It is pointless to detect and remember the sblink value, which is set by hardware and comes up 0. The BKDG marks this as a reserved field vs. documentation for multi-node-capable Family 15h devices. Because there is only one option for SB link now, relocate the register write done by set_vga_enable_reg() and remove the function. Change-Id: Ie4ce6b5aa847a184534224db302437ff8d37c14b Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-13amd/stoneyridge: Remove CONFIG_LOGICAL_CPUS setupMarshall Dawson
Delete the check for sibling cores and the programming of CPUID HTT and CmpLegacy back-door bits. The code has no effect on modern Family 15h APUs. The bits being modified come up set out of reset. Change-Id: Ida76863d84109b49ce6b12c71bad5b44331a2ff9 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21493 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-13amd/stoneyridge: Remove PSP BAR init from cpu initMarshall Dawson
Remove the step of setting PSP BAR3 from cpu_dev_ops .init. The BAR is configured in romstage by AmdInitPost(). Change-Id: I7e77fad3abdcb6482f1b9d849e5922a426dff5f5 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21492 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-13amd/stoneyridge: Make cbmem_top SMM awareMarshall Dawson
Make the default for SMM_TSEG_SIZE depend on SMM_TSEG in addition to HAVE_SMI_HANDLER. Change the value returned by cbmem_top() to carve out a range to be used by TSEG. The SMM Mask register has a granularity of 128KB but align the value to 16MB to keep down the number of variable MTRRs required. Change-Id: I54ffc10108862b7d022fbbd92bf97525b349df27 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-13util/lint: Exclude external payloads from coreboot lowercase checkMartin Roth
Change-Id: I70bbf37fad67fd9bda5724811f4bbdcc53779a42 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-09-13arch/x86: Fix typo with MTRRKyösti Mälkki
Change-Id: I67a470c2c2a659d5355fdd0939d0572c1ff3e291 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-09-13soc/intel/cannonlake: Add ramstage uart debug supportLijian Zhao
Use fixed resources for LPSS uart devices for debugging purpose. BUG=NONE BRANCH=NONE TEST=Boot up with coreboot rom, without this changes, serial log will stop print anything during PCI resourcre setup as MMIO address of UART will be re-assigned. Change-Id: Ib773e01d5f5358f13297400075d6920793200b88 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21412 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-13asus/p2b-ls,asus/p3b-f: Move to EARLY_CBMEM_INITKeith Hui
These two boards have been boot tested with EARLY_CBMEM_INIT and is good to go. Change-Id: I2e69901ed83502894f6794b3c1d7bab9aab95e51 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/21351 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-09-13intel/i440bx: Implement EARLY_CBMEM_INIT supportKeith Hui
Implement cbmem_top() required for cbmem support in romstage. Boot tested on asus/p2b-ls. Boards to move to this setup in followup patches. Change-Id: I432f145a5343c1bb5f2b0de3b6b88f57124d1bd9 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/20977 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-09-13google/snappy: Update EC keyboard backlight flag by SKU IDKevin Chiu
Set AP SKU ID by ec command EC_CMD_SET_SKU_ID to update EC keyboard backlight flag. BUG=b:65359225 BRANCH=reef TEST=emerge-snappy coreboot Change-Id: I1153aa0b89250c55f311dd93a01fcef47afd7292 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/21400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-13ec/google: Add command to set APU SKU ID to ECKevin Chiu
EC needs to have command to set SKU ID from APU to support specific feature (ex: keyboard backlight) for variant board. BUG=b:65359225 BRANCH=reef TEST=emerge-snappy coreboot Change-Id: I8cd3b8f646d4134d6bfff2869f6df2d9c615c157 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/21504 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-13vendorcode/siemens: Add LegacyDelay to hwilibWerner Zeh
Add a new parameter to hwilib called LegacyDelay. It will be used to define a delay time to wait for legacy devices if coreboot is too fast for old and slow onboard devices. Change-Id: Id0386fdea0ecfb3c1ff6ec1c456071246529950a Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/21517 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-09-13sb/intel/bd82x6x: Add time-stamp around ME DRAM updateNathaniel Roach
Add a timestamp before and after waiting for the ME to acknowledge the DRAM being ready. This allows easier debugging during use of me_cleaner and/or alternate ME images. Change-Id: Ie228e12a75d373b4f406b3595e1fb1aab41aa5df Signed-off-by: Nathaniel Roach <nroach44@gmail.com> Reviewed-on: https://review.coreboot.org/21465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-09-13intel/common/acpi: Use UART_BASE_0_ADDR macro for LPSS UARTV Sowmya
This patch fixes the build issue by replacing UART_DEBUG_BASE_ADDRESS macro with UART_BASE_0_ADDR macro to configure LPSS UART base adress for ACPI debug prints. TEST= Build and boot soraka and fetch the ASL debug prints. Change-Id: Ib31174701c56c88829ae0e725b546b66ea1ed16d Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/21513 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-13mainboard/intel/cannonlake_rvp: Include ChromeOS supportLijian Zhao
Add ChromeOS support for cannonlake_rvp platform. Change-Id: Ia02407da8ab4aac2c2c33a7796fc71aea12e2925 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21281 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-13mainboard/intel/cannonlake_rvp: Add dummy DSDT tableLijian Zhao
Add dummy ACPI DSDT table for cannonlake rvp platform. Change-Id: If45c2a7da7f5b20ddd3d56bf9d7f68a85d2f791d Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-13soc/intel/cannonlake: Add common ACPI support for CNLLijian Zhao
Basic ACPI support for CNL on top of common ACPI, which will establish a root of FADT table, fill MADT entry, create gnvs field, record wake status and convert device names into DSDT dev definitions. Change-Id: Ibc16d2afdd3cb9bad2ecb85cf320c88504409707 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21076 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 00:38:09 +0000