summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-24soc/intel/common/gpio_defs: Remove unused macro for NFMaxim Polyakov
Since the bufdis parameter (bit 9:8 in Pad Configuration DW0 register) does not affect the pad in native function mode, PAD_CFG_NF_BUF_IOSSTATE_IOSTERM() macro is not required to configure the pad. This macro has not been used, so deleting it will not affect anything. Change-Id: Icce6f130308dbe7032b99539f73688bae8ac17e0 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42913 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-24soc/intel/common/gpio_defs: Undo set TxDRxE in GPI_TRIG_OWN()Maxim Polyakov
IO Standby State can use various settings independently of PAD_CFG_GPI_TRIG_OWN (). Instead, use other existing macros to set this parameter: - PAD_CFG_GPI_IOSSTATE_TRIG_OWN() - PAD_CFG_GPI_TRIG_IOS_OWN() Change-Id: I0f5fbd79f892981eb4534f50ac96a7d0c190f59e Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42912 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-24soc/intel/common/gpio_defs: Improve some GPI macrosMaxim Polyakov
The patch updates existing macros for the GPI: - PAD_CFG_GPI_IOSSTATE_IOSTERM() - PAD_CFG_GPI_IOSSTATE() to allow the user to set the RX Level/Edge Configuration (trig) and the Host Software Ownership (own) fields in addition to IO Standby State (iosstate) and IO Standby Termination (iosterm) in the pad configuration using these macros. Change-Id: I8a70a366e816d31720d341a5d26880dc32ff9b8d Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner
2020-07-24soc/amd/picasso/sb: Gate FCH AL2AHB clocksMatt Papageorge
Gate the A-Link to AHB Bridge clocks to save power. These are internal clocks and are unneeded for Raven/Picasso. This was previously performed within the AGESA FSP but this change relocates it into coreboot. BUG=b:154144239 TEST=Check AL2AHB clock gate bits at the end of POST before and after change with HDT. Change-Id: Ifcbc144a8769f8ea440cdd560bab146bf5058cf9 Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42829 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-24superio/common: Avoid NULL pointer dereferenceJohn Zhao
Coverity detects dereferencing a pointer that might be "NULL" when calling report_resource_stored. Add sanity check for dev to prevent NULL pointer dereference. Found-by: Coverity CID 1419488 Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I03efad87ba761e914b47e3294c646335cfbaed24 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-24soc/amd/picasso/fsp_params: add missing newline between functionsFelix Held
Change-Id: If5d798a410f092e0ce99c16c84809b6b2e30cc2e Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43779 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-24soc/amd/picasso/fsp_params: add asserts for descriptor countFelix Held
With the updated FSP UPD headers there are enough DXIO descriptor slots in the UPD, so we can now add asserts to make sure that the mainboard doesn't pass more DXIO/DDI descriptors than the UPD has slots for. This is part of the DXIO/DDI descriptor handling cleanup. BUG=b:158695393 Change-Id: Ia220d5a9d4ff11707b795b04662ff7eead4e2888 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43435 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-24vc/amd/fsp/picasso: update UPD headerFelix Held
A new version of UPD headers generated from the FSP tree. This adds UPDs for downcoring and increases the number of DXIO descriptor slots. BUG=b:161152720 TEST=SATA on Mandolin works now. Cq-Depend: chrome-internal:3175393 Change-Id: I1e27597e22af4df65d206a38b67c4920298b30b2 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43659 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-24mb/ocp/tiogapass: Use macro to configure IIOMaxim Polyakov
Use macros to configure each of the IIO ports instead of an array of some unknown parameters. This will clean up the code and make it easier to read. Tested with BUILD_TIMELESS=1, Tioga Pass, remains identical. Change-Id: I2911992435a6c93624525426d56212f821abb866 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43502 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-24nb/intel/sandybridge: Remove unnecessary `struct sys_info`Angel Pons
It was only used in one function, but its value was never read. Drop it. Change-Id: Ib511352d51d4452d666640d0f52810b06c8d61ce Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43702 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-07-24nb/intel/ironlake: Move southbridge code to ibexpeakAngel Pons
There's no need to set up the southbridge in the northbridge code. Change-Id: I0f80c92aca885812c27a8803c2745844d8dfb939 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-07-24sb/intel/*: Delete invalid commentAngel Pons
Looks like these comments were moved without checking them. They are no longer correct nor useful, so kill them with fire. Change-Id: I3de04b8c03f7c511376dec922a60958ffc3bf6a3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-07-24mb/ocp/deltalake: Send OEM IPMI command for CMOS clear on RTC failureJingle Hsu
When RTC failure is detected, send IPMI OEM command to issue CMOS clear. This is to let the payload (LinuxBoot) handle the IPMI OEM CMOS clear command by resetting RTC data, erasing RW_VPD (TODO) and add a SEL, then reboot the system. Tested=on OCP Delta Lake, after removing RTC battery we can see the above flow can be executed correctly. Signed-off-by: Jingle Hsu <jingle_hsu@wiwynn.com> Change-Id: I27428c02e99040754e15e07782ec1ad8524def2f Reviewed-on: https://review.coreboot.org/c/coreboot/+/43005 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-24mb/ocp/tiogapass: Populate SMBIOS data and set the read PPIN to BMCJohnny Lin
1. Populate SMBIOS data from OCP_DMI driver read from FRU 2. Set the read PPIN MSR for CPU0 and CPU1 to BMC, selecting PARALLEL_MP_AP_WORK to enable OCP DMI driver to read remote socket PPIN. Tested on OCP Tioga Pass. Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Change-Id: Ie11ab68267438ea9c669c809985c0c2d7578280e Reviewed-on: https://review.coreboot.org/c/coreboot/+/40524 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-24mb/google/octopus/variants/garg: update Garfour SKU IDTony Huang
SKUID 51 - Garfour EVT (non-touch, TypeA DB) 52 - Garfour DVT (touch, HDMI DB) BUG=b:161554087 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: I3cb17c2b665c303da210817a531c869c6324b249 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Henry Sun <henrysun@google.com>
2020-07-23mb/google/zork: Don't expose reset GPIO for touchscreen to OSRaul E Rangel
The Raydium ACPI entry currently provides a reset GPIO and an _ON/_OFF method to the kernel. These are contradictory. The ownership of the GPIO should be mutually exclusive between either the OS or the FW. Since we have two methods exposed this causes the OS to reset the TS twice. Once using the _ON method, and once using the GPIO. Additionally the _ON method is waiting for 20ms after reset while the OS driver uses a 50ms delay. The Raydium TS datasheet specifies 20ms for FW ready time, so the OS driver is adding additional padding. The reference design has a 32ms rise time on the reset line. So without this patch, the OS tries to reset the TS using the _ON method and it waits for 20ms. This is not enough time for the reset line to reach high, let alone account for the FW ready time. The OS driver then tries to reset the device by toggling the GPIO. It waits 50ms which is still 2ms less than required. This CL removes the GPIO from being exported in the _CRS so the OS driver won't try and reset the device. It also increases the reset delay by 32ms to account for the rise time. This isn't a complete fix. I think that the slow rise time is causing some kind of metastability in the TS reset hardware. Using a script to bind and unbind the TS driver, the TS device becomes unresponsive after ~200 iterations. The only way to reset the device is to power cycle. The TS power is also not currently controlled by the power resource. This means that we have no guarantee over when the reset line is toggled. This will lead to issues while spending and resuming. BUG=b:160854397 TEST=Boot trembyle and make sure TS works. Suspend/Resume trembyle 300+ times. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I23131be5d7109eed660a8bd6e2c156c015aa3c4e Reviewed-on: https://review.coreboot.org/c/coreboot/+/43467 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-23mb/google/zork/variants/dalboz: Use HS200 for eMMCEric Peers
Earlier versions of Dalboz did not correctly handle HS400. One fix was to add stitching vias, but these boards did not have them. b/156539551 Another possible fix is to add tuning parameters including drive strength, but that is still a WIP. b/158959725 This should correct OS load failures in the meantime by running the bus slower. BUG=b:158845662 TEST=build, flash, boot sku 0x5a80000c to OS BRANCH=None Signed-off-by: Eric Peers <epeers@google.com> Change-Id: Ia3e7a641bde04c5a7be29bf91c38dd8c110ed17a Reviewed-on: https://review.coreboot.org/c/coreboot/+/43572 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-23zork: Create dirinboz variantKevin Chiu
Create the dirinboz variant of the dalboz reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.1.1). BUG=b:161579679 BRANCH=master TEST=util/abuild/abuild -p none -t google/zork -x -a make sure the build includes GOOGLE_DIRINBOZ Change-Id: I33c03080ffbe0bca61acf4144417b9f5fff6389f Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43601 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-07-23mb/google/arcada: Enable bayhub 720 on ArcadaMark Hsieh
Add PCIe-eMMC bridge bayhub 720 on Arcada to the devicetree. BUG=b:157971972 BRANCH=sarien TEST=local build and boot from SATA/PCIe-eMMC storage successfully Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I7e925730e57806e7398684dffd0d3bd1f4f9deeb Reviewed-on: https://review.coreboot.org/c/coreboot/+/43669 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-23mb/google/sarien: Enable bayhub 720 on SarienIvy Jian
Add PCIe-eMMC bridge bayhub 720 on Sarien. BUG=b:157971972 BRANCH=sarien TEST=local build and boot from storage successfully Change-Id: I28f40a420d51f476487655548f386cfbdc2e5329 Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42740 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Mathew King <mathewk@chromium.org>
2020-07-23mb/google/dedede/var/waddledoo: Configure stop delay for SiS TSKarthikeyan Ramasubramanian
Reset the Touchscreen (TS) and disable the stop GPIO (report switch) at the same time. Add a delay of 100 ms after disabling the stop GPIO. This will ensure the required delay is inserted for both reset and stop disable GPIOs simultaneously. BUG=b:152936541 TEST=Build and boot the waddledoo mainboard. Ensure that the SiS Touchscreen is functional. Change-Id: Icbfb5e07a28ab72b1ff696ad1183a6c2173dcaac Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43453 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-23mb/google/dedede/var/drawcia: Generate SPD ID for supported partsKarthikeyan Ramasubramanian
Add supported memory parts in the mem_list_variant.txt and generate the SPD ID for the parts. The memory parts being added are: H9HCNNNBKMMLXR-NEE K4U6E3S4AA-MGCR BUG=None TEST=Build the drawcia board. Change-Id: Id05c0b2a87b64bfedc761949cbc8ad6cf7dd73a5 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43505 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-23mb/google/zork: Fix Goodix touchscreen ACPI nodeFurquan Shaikh
This change does the following: a. USI_REPORT_EN is no longer set to high in coreboot. Instead GPIO_144 is exposed as stop_gpio in ACPI to allow OS to control this pad as required. b. Appropriate delays are added for power-down sequencing: - Delay after REPORT_EN is disabled - 1ms - Delay after RESET is asserted - 1ms BUG=b:159501288 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: If4d12fa0d4f4e5123d8fdccdabda996dcafa4523 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-23mb/google/zork/var/morphius: Change hid and desc for Goodix touchscreenFurquan Shaikh
Morphius uses Goodix touchscreen and not G2 touchscreen. This change updates hid and desc properties in devicetree accordingly. BUG=b:159501288 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I2527fa5409bb127ac225c6fb2a5f1bc24895f6cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/43700 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-23mb/google/zork: Drop TODO for GPIO_91Furquan Shaikh
GPIO_91 is added to ACPI using the device tree entry for codec. So, this change drops the TODO from GPIO table. Change-Id: I9c2e91465ab554126531f8512028360ae5fb316d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-23mb/google/zork: Configure all pads in ramstage for dalboz referenceFurquan Shaikh
This change configures all missing pads in ramstage for dalboz reference. This ensures that the state of all pads is set correctly for the payload/OS. Also, all the pads for the platform are configured in baseboard gpio table in ramstage to ensure that variants can override any pads if required. BUG=b:154351731 Change-Id: Ia30da908d3827177a7b3594ffba38bff81018ab9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-23mb/google/zork: Configure all pads in ramstage for trembyle referenceFurquan Shaikh
This change configures all missing pads in ramstage for trembyle reference. This ensures that the state of all pads is set correctly for the payload/OS. Also, all the pads for the platform are configured in baseboard gpio table in ramstage to ensure that variants can override any pads if required. BUG=b:154351731 Change-Id: Idd827b6a4f995546493596f22249f8699bdf526b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-23mb/google/zork: Remove unnecessary PULL_UP from early_gpio_tableFurquan Shaikh
This change drops PULL_UP configured on pads in early_gpio table since these pads have external pulls. BUG=b:154351731 Change-Id: Id270e7b4f83dfa942655f513776a3b1c15c9678d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43696 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-23soc/amd/common/gpio: Fix definition of GPIO_INT_ENABLE_STATUS_DELIVERYFurquan Shaikh
This change fixes the definition of `GPIO_INT_ENABLE_STATUS_DELIVERY` to use `GPIO_INT_ENABLE_DELIVERY` instead of `GPIO_INT_ENABLE_STATUS_DELIVERY`. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I64d912200779875cf121cec4476fd39de74c0223 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-23amd/picasso: rename PCIe descriptor to DXIO descriptorFelix Held
Most of the DXIO descriptors are used to configure PCIe engines and lanes, but on Picasso system some of the DXIO lanes can also be configured as SATA or XGBE ports. Change-Id: I28da1b21cf0de1813d87a6873b8d4ef3c1e0e9dd Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43675 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-23vc/amd/fsp/picasso: add logical to lane number in port descriptor structFelix Held
The lane numbers in the PCIe/DXIO descriptor are the logical and not the physical ones, so add logical to the corresponding field names of the fsp_pcie_descriptor struct. Change-Id: I7037fed225119218e87593932815aff815e83ff8 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-23mb/google/kukui: Add new configs 'esche' and 'burnet'Kevin Chiu
new boards introduced to Kukui family. esche: clamshell burnet: 360 convertible BUG=b:161768221 BRANCH=master TEST=emerge-jacuzzi coreboot Change-Id: I2245c34533549bb94c58938fee5778b8a03e2767 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-07-23mb/prodrive/hermes: Update VBT fileChristian Walter
Update .vbt file to support two DP outputs. Change-Id: Ifd4163aafe4ef3070d04a72a4699303af72c5102 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-23MAINTAINERS: Add Jeremy Soller for ec/system76 and mb/system76Jeremy Soller
I currently maintain System76 coreboot support. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: I4240618c9d9846c3b9e30db4d5ac725e1ca2a09c Reviewed-on: https://review.coreboot.org/c/coreboot/+/43674 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-23ec/system76_ec: add support for System76 ECJeremy Soller
This adds ACPI code for System76 EC and converts system76/lemp9 to use EC_SYSTEM76_EC. Tested on system76/lemp9. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: I1f693268d94b693b6764e4a3baf4c3180689f3be Reviewed-on: https://review.coreboot.org/c/coreboot/+/43612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Michael Niewöhner
2020-07-23mb/ocp/deltalake: Add ipmi POST start command in romstageTimChu
Add function to send POST start command to BMC. This function is used in romstage and the POST end command will be sent in u-root. TEST=Read POST command log in OpenBMC, if command received successfully, message may show as below, root@bmc-oob:~# cat /var/log/messages |grep -i "POST" 2020 Jul 15 16:36:11 bmc-oob. user.info fby3-v2020.23.1: ipmid: POST Start Event for Payload#2 root@bmc-oob:~# Signed-off-by: TimChu <Tim.Chu@quantatw.com> Change-Id: Ide0e2a52876db555ed8b5e919215e85731fd80ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/41605 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-23mb/ocp/deltalake: Implement SMBIOS type 9 -- system slots by SKUMorgan Jang
Create SMBIOS type 9 by getting PCIe config from BMC. TEST=Check SMBIOS type 9 is created correctly on different SKUs Change-Id: Ifd2031b91c960ff2add8807247271eb7c38a0bf2 Signed-off-by: Morgan Jang <Morgan_Jang@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42280 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-23soc/intel/xeon_sp/cpx: display SystemMemoryMapHob fieldsJonathan Zhang
SystemMemoryMapHob is necessary for SMBIOS type 17 among other things. It is a fairly large structure, so the pointer to the data instead of the structure itself, is included in the HOB. Use pointer to SystemMemoryMapHob structure to interpret SystemMemoryHob HOB body. Adjust the structure definition to match with CPX-SP ww28 release. Display more fields to ensure the structure definition is correct. TEST=Boot DeltaLake server, and check field values of SystemMemoryMapHob to make sure they are correct: 0x7590a090, 0x00000020 bytes: HOB_TYPE_GUID_EXTENSION f8870015-6994-4b98-95a2bd56da91c07f: FSP_SYSTEM_MEMORYMAP_HOB_GUID ================== MEMORY MAP HOB DATA ================== hob: 0x777f7000, structure size: 0x6c88 lowMemBase: 0x0, lowMemSize: 0x20, highMemBase: 0x40, highMemSize: 0x5d0 memSize: 0x600, memFreq: 0xb76 NumChPerMC: 3 SystemMemoryMapElement Entries: 2, entry size: 16 memory_map 0 BaseAddress: 0x0, ElementSize: 0x20, Type: 0x1 memory_map 1 BaseAddress: 0x40, ElementSize: 0x5d0, Type: 0x1 BiosFisVersion: 0x0 MmiohBase: 0x80000 0x777f7000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ ... Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I271bcbd6030276b8fcd99d5b4f2c93f034dd9b52 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43336 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-23libpayload: cbgfx: Add draw_line()Yu-Ping Wu
Add a function draw_line() to draw either a horizontal or vertical line segment. Theoretically a horizontal line can also be drawn by calling draw_rounded_box() with dim_rel.x being the line length and dim_rel.y being the line width. However, due to the truncation in integer division when converting relative coordinates to absolute ones, this will potentially produce inconsistent line widths, depending on the value of pos_rel.y. It is guaranteed that draw_line() will produce consistent line widths, regardless of the position of the line. Also, when the thickness argument is zero, this function is able to draw a line with 1-pixel width, which is not achievable by draw_rounded_box(). BRANCH=puff BUG=b:146399181, b:161424726 TEST=emerge-puff libpayload Change-Id: I2d50414c4bfed343516197da9bb50791c89ba4c2 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com>
2020-07-23mb/intel/jasperlake_rvp: Enable CSE Firmware Lite SKU for JSLRVPKrishna Prasad Bhat
This patch enables CSE Lite SKU for jasperlake rvp. BUG=b:160201335 BRANCH=None TEST=Build and boot jasperlake rvp with CSE Lite SKU. Cq-Depend: chrome-internal:3142530 Change-Id: I60039ffb1f24cf98f55e83d8c8649745598aa43a Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40571 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-23mb/intel/jasperlake_rvp: Skip CPU Replacement Check for jasperlake rvpKrishna Prasad Bhat
This patch enables the SkipCpuReplacementCheck config for jasperlake rvp to avoid the forced MRC training with the soldered down SOC. BUG=b:160201335 BRANCH=None TEST=Build and verify on jasperlake rvp with CSE Lite SKU. Cq-Depend: chrome-internal:3142530 Change-Id: I40fb9a25170e8db3c63a71428ba459160a918961 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43146 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-23mb/google/dedede: Enable the CSE Lite SKU for dededeV Sowmya
This patch enables the CSE Lite SKU for the dedede baseboard. BUG=b:160201335 TEST=Build and boot waddledoo with CSE Lite SKU. Cq-Depend: chrome-internal:3142530 Change-Id: I24d7d715d55524807af0127aa4a346a008164b8c Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41818 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2020-07-23mb/google/dedede: Skip the CPU replacement check for dededeV Sowmya
This patches enables the SkipCpuReplacementCheck config for the dedede baseboard to avoid the forced MRC training for all its variants with the soldered down SOC. BUG=b:160201335 TEST=Build and verify CSE Lite SKU on Waddledoo. Cq-Depend: chrome-internal:3142530 Change-Id: I611e66f74a3b9b090ab5e0d836231643d3f919dc Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2020-07-23soc/intel/jasperlake: Add the SkipCpuReplacementCheck configurationV Sowmya
Add SkipCpuReplacementCheck config to control the FSPM UPD used for skipping the CPU replacementment check to avoid the forced MRC training for the platforms with soldered down SOC. BUG=b:160201335 TEST=Build and verify CSE Lite SKU on Waddleddo. Cq-Depend: chrome-internal:3142530 Change-Id: I63fcdab3686322406cf7c24fc26cbb535cc58c8d Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2020-07-22sb/intel/i82801jx/hdaudio.c: Rename to `azalia.c`Angel Pons
Other Intel southbridges use this name for the HD audio codec. Change-Id: Ic96797e6c2028f082130211bb5f4270391f866c5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43681 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-22sb/intel/i82801ix/hdaudio.c: Rename to `azalia.c`Angel Pons
Other Intel southbridges use this name for the HD audio codec. Change-Id: I50dbf0a079944b7fa6cfd6622c0626bc9139af85 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43680 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-22sb/intel/i82801ix/sata.c: Use `probe_resource`Angel Pons
It is impossible for `find_resource` to return NULL, it dies instead. Change-Id: If8e26f768383e741100e3690322db3dabeec1922 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-22ec/google/chromeec: Fix Coverity Scan error (BAD_SHIFT)Tim Wawrzynczak
A recent Coverity scan found an issue with the way the EC_HOST_EVENT_MASK macro was being used. It was being passed values between 0 and 63, but since it is doing basically (1ULL << (value - 1)), this caused a shift of -1 when `i` is 0 and also doesn't reach the 63rd bit of the mask. This is fixed by incrementing the start and end conditions of the loop by 1, so the event mask ranges from bits 0 to 63, instead of -1 to 62. Found-by: Coverity CID 1430218 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I6a7cfa64545f3d313de24407f0a91b48368f2a8a Reviewed-on: https://review.coreboot.org/c/coreboot/+/43460 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-07-22soc/intel/jasperlake: Move tco_configure to bootblockTim Wawrzynczak
Similar to CB:43313 (SHA bb50c672278), it seems possible for the same problem to come up on jasperlake. Again, it should be harmless to configure the TCO device earlier in the boot flow. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: If95e46124660b4ed457434f727c9f9f7b02b0327 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43539 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-22soc/intel/cannonlake: Move tco_configure to bootblockTim Wawrzynczak
Similar to CB:43313 (SHA bb50c672278), it seems possible for the same problem to come up on cannonlake. Again, it should be harmless to configure the TCO device earlier in the boot flow. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ib8883d27b2a0994a67ec5e044a692a2e853fd680 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43538 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-22mb/google/zork: Modify Woomax variantKane Chen
Update Woomax configuration including GPIO, memory SPD table, I2C devices and USB type C. BUG=b:158343602 BRANCH=None TEST=emerge-zork coreboot Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I55ba995d9438551d45cb9e17f92b5089ccf4a5fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/43497 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-22nb/intel/i945: Put names to northbridge PCI devicesAngel Pons
Tested with BUILD_TIMELESS=1, Getac P470 does not change. Change-Id: I0d51f48f0c1e37c41322a0eda49806925d9d194d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42285 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-22mainboard/amd/mandolin: describe where the two HDA codecs resideFelix Held
Change-Id: I99b062e4ce1cf862ea03b0edb6ea843df5f8f2b2 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-22mb/ocp/deltalake: Unset POWER_STATE_DEFAULT_ON_AFTER_FAILURETim Chu
Change PCH power policy. Set default of POWER_STATE_DEFAULT_ON_AFTER_FAILURE to n in order to change power state to S5 when power is reapplied after power failure. TEST=Base on CB:42289, CB:43338 and build for Deltalake. The following Kconfig options must be selected: select SOC_INTEL_COMMON_BLOCK_PMC select ACPI_INTEL_HARDWARE_SLEEP_VALUES select CPU_INTEL_COMMON_SMM Boot the system and check the last bit of GEN_PMCON_B is set to 1 through ITP with command: pch.pm_dump Signed-off-by: Tim Chu <Tim.Chu@quantatw.com> Change-Id: I4d4f14bdfc18740976171fd5d369b2d79a916dc4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42976 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-22mb/ocp/deltalake: Set FSP log level and add default values if VPD variables ↵Johnny Lin
are not found 1. Read VPD variable 'fsp_log_level' to decide FSP log level. 2. Define the default values when the VPD variables cannot be found, put all the values to vpd.h for better documentation and maintenance. Tested=On OCP DeltaLake, the fsp_log_level can be changed from the VPD variable. Change-Id: I44cd59ed0c942c31aaf95ed0c8ac78eb7d661123 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43606 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-22vc/amd/fsp/picasso: mark remaining UPD header structs as __packedFelix Held
Change-Id: I5a97de69bfda201e039587c67037bfb93ca16c15 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43658 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-22sb/intel/i82801jx: Drop `docking_supported`Angel Pons
The three mainboards using this southbridge are desktop boards, which are not dockable. The Dell Precision M6400 laptop is dockable, but even though it has an Eaglelake MCH, it uses an i82801ix southbridge instead. So, one could still port that laptop to coreboot after this change! :P Also, drop the now-unnecessary `chip` and `dev` variables. Change-Id: Ic9ab497c91d66032929190cde22d59a208887f50 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-22sb/intel/i82801jx: Drop `c3_latency`Angel Pons
The three mainboards using this southbridge do not define it. Note that the default value of zero might be wrong, so add a FIXME comment. Change-Id: Id16bb12a4628daf311bddf7e4701fc480d6b18e5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-22Doc/tutorial/part1.md: Show how to list toolchain targetsDavid Hendricks
Change-Id: I276ea0a6b52b55b8772c76f48f7a0fb149af6e78 Signed-off-by: David Hendricks <david.hendricks@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43518 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-22mb/google/kukui: revise config structure for Jacuzzi followersHung-Te Lin
There are more Jacuzzi followers coming and we want to have a simplified way of adding new boards. Now, detachable and tablets should select BOARD_GOOGLE_KUKUI_COMMON and clamshells should select BOARD_GOOGLE_JACUZZI_COMMON. BUG=None TEST=make menuconfig; make -j # for kukui, krane, jacuzzi, juniper BRANCH=kukui Change-Id: Ifc1eb6a3792f46c5db6b5346902f1114955b28ae Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-07-21mb/google/dedede: Create madoo variantIan Feng
Create the madoo variant of the waddledoo reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.1.1). BUG=b:161191394 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_MADOO Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I6d3f611606f86036d67be9c8b0fda833ab61ecc1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-07-21soc/intel/tigerlake: Select PLATFORM_USES_FSP2_2Subrata Banik
This patch performs below operations 1. Add support for FSP 2.2 2. Set EnableMultiPhaseSiliconInit to ensure bootloader can call FspMultiPhaseSiInit() API. 3. Provide placeholder to perform require chipset programming (example TCSS) before calling FspMultiPhaseSiInit() API. Change-Id: I15252d2db3f8e75d430b84e86cc5141225a3f981 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41729 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-07-21mb/googlz/zork: Drop unnecessary PULL_UPs in variant overridesFurquan Shaikh
This change drops the pulls configured on override GPIOs as they already have external pull-ups. Also, pads which are unused are configured as PAD_NC. BUG=b:154351731 Change-Id: I8da5d51af25bbe2694c21ecb0868c9cc387243cb Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-07-21sb/intel/lynxpoint/me_9.x.c: Add spaces around `=`Angel Pons
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical. Change-Id: I1baa731335a9c543c7d31b9aadc8758806750c64 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42629 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21mb/system76/lemp9: drop FSP_M_XIPMichael Niewöhner
Drop FSP_M_XIP since it's selected by the soc already. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I999d369be395de08d4ab7f115fedf4b7fa10eb34 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43635 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-07-21mb/system76/lemp9: drop ONBOARD_VGA_IS_PRIMARYMichael Niewöhner
Drop config ONBOARD_VGA_IS_PRIMARY as it's only needed for mainboards with multiple graphics devices. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I6525c65af3dcfc96ea3d68a1388432179e9ac43d Reviewed-on: https://review.coreboot.org/c/coreboot/+/43636 Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21configs/config.stm: Correct config file nameAngel Pons
Otherwise, Jenkins doesn't pick up the file, and STM doesn't get build-tested. Change-Id: I7cf23c8352f82b2672c7ff25efba0057b8e059cd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eugene Myers <cedarhouse1@comcast.net> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2020-07-21mb/lenovo/t430/gma-mainboard.ads: Replace with GPLv2+ equivalentPeter Lemenkov
Replace it with t430s/gma-mainboard.ads which is licensed under more flexible terms (GPL-2.0-only vs. GPL-2.0-or-later). Apart from licensing terms these files are identical. This makes diff between boards smaller. Change-Id: I633702d363134654e71e35404237d75b499f089a Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-07-21mb/lenovo/t420/gma-mainboard.ads: Replace with GPLv2+ equivalentPeter Lemenkov
Replace it with t420s/gma-mainboard.ads which is licensed under more flexible terms (GPL-2.0-only vs. GPL-2.0-or-later). Apart from licensing terms these files are identical. This makes diff between boards smaller. Change-Id: I5393a603b5a4cd353149c1fa9e3e29020946b962 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-07-21security/intel/stm: Add missing <stdbool.h>Angel Pons
Jenkins does not build `config.stm` because the file name lacks the mainboard name. So, the code was not being build-tested, and it does not build because several files lacked the definition for `bool`. Add the missing #include directives. Renaming the config file so that Jenkins build-tests it is done in a follow-up. Change-Id: Idf012b7ace0648027ef6e901d821ca6682cee198 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43622 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Eugene Myers <cedarhouse1@comcast.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21src: Use ACPI macrosElyes HAOUAS
Change-Id: I2cf11b784299708f02fd749dcb887b6d25f86f5b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-21soc/intel/baytrail: Add new CPUID 0x30679Mate Kukri
This ID is reported by newer mfg date SOCs. Needed for newer GBYT4 boards. Change-Id: I6af746d66a15f67553de1dc1c925e5cb0b181898 Signed-off-by: Mate Kukri <kukri.mate@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-21mb/biostar: Add TH61-ITX portMate Kukri
- CPU: only tested with a Xeon E3-1220 (Sandy Bridge) - RAM: native raminit tested (4G+4G, 8G+8G) - USB: both chipset and ASMedia USB3 work, tested in SeaBIOS and Linux (5.4) - LAN: tested in Linux - SATA: all 4 ports work, tested in SeaBIOS and Linux - iGPU: I can't test it as I only have a Xeon for this socket - PEG: tested with an nVidia GT210, initialized by SeaBIOS - PS2 keyboard and mouse combo port: no devices to test with - Front panel header: tested, works - Audio: tested, works - Diagnostic LEDs: TBD Change-Id: I9fd3c0b148b694fcb8e728cc17f0bd45eb5af9f2 Signed-off-by: Mate Kukri <kukri.mate@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43165 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21e7505/i82801dx: Use common code for early SMBusAngel Pons
While it looks different, the early SMBus code for this southbridge is still the same. In addition, this code was not checking the vendor ID before. It is assumed that adding this check does not pose a problem. Change-Id: I95ae4db399ce5592cefca82fa75f349220023b8c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42006 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21i945/pineview/x4x/i82801gx: Use common code for early SMBusAngel Pons
The early SMBus code for this southbridge checked if the PCI device ID is valid. However, we can't easily do that in common code, and we should not attempt to do so either: if a SMBus device behaves differently, then it should not be using the common code anyway. Since this southbridge is used with two different northbridges, we need to update both of them. Plus, x4x raminit no longer needs to know which southbridge it is paired with, since both i82801gx and i82801jx use the common early SMBus code, so we drop some preprocessor around includes. Change-Id: Ic60a3f89bda6000fbe646461f05240c1b09db6e9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42005 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21gm45/i82801ix: Use common code for early SMBusAngel Pons
The early SMBus code for this southbridge checked if the PCI device ID is valid. However, we can't easily do that in common code, and we should not attempt to do so either: if a SMBus device behaves differently, then it should not be using the common code anyway. Change-Id: I5c21e091e437d23a173ddcf35d4f1efada6194cb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42004 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21x4x/i82801jx: Use common code for early SMBusAngel Pons
The early SMBus code for this chipset was not checking the vendor ID before. It is assumed that adding this check does not pose a problem. Change-Id: I0c36c8cd8aca8db860b1edafd29d4f2dbaa2c822 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42003 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21sb/intel/lynxpoint: Use common code for early SMBusAngel Pons
Looks like no one uses early SMBus for now, but that may change someday. Change-Id: I42971662a279860a8c2e058fcb194fe5eba7c740 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42001 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21sandybridge/bd82x6x: Use common code for early SMBusAngel Pons
Change-Id: I95b82f3d733db2a46096205f23ed85aaff021e28 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42000 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21ironlake/ibexpeak: Move early_smbus.c to common codeAngel Pons
We will update the other platforms to use this common code in susbsequent commits. While we are at it, reflow a broken line, define the SMBus PCI device in the header and fix whitespace. Change-Id: I1fdff2feead4165f02b24cb948d8c03318969014 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41999 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21device/cardbus_device.c: Drop `cardbus_size_bridge_resource`Angel Pons
It does nothing useful anymore. Drop it before it grows moss. Change-Id: I5f95376fe2a38eda5d819c53edb85ef11ab7a0f1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43591 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21soc/intel/xeon_sp/cpx: remove unused gpio.hMaxim Polyakov
This file does not contain useful information and is not used to build the image. The common GPIO driver from soc/intel/common uses layout in lewisburg_pch_gpio_defs.h [1,2] file, which is correct for all chipsets from the Lewisburg family: C621, C621A, C622, C624, C625, C626, C627, C627A, C628, C629, C629A [3] [1] src/soc/intel/xeon_sp/include/soc/lewisburg_pch_gpio_defs.h [2] https://review.coreboot.org/c/coreboot/+/39425 [3] Intel document #547817 Change-Id: I1f3ac4afff9e628890df8cec075fd3e42a590172 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43535 Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Reviewed-by: Bryant Ou <bryant.ou.q@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21inteltool/gpio: Add support for new Lewisburg chipsetsMaxim Polyakov
- Add SKUs and Super SKUs of new Lewisburg series chipsets: C621A, C627A, C629A [1]. - These changes allow the utility to generate the GPIO config registers dump. [1] https://review.coreboot.org/c/coreboot/+/40395 Change-Id: I9b63c0a3860a901e58af0c0d5184361661bab5e3 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43534 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21util/inteltool: add missing L0 and L1 pads for LewisburgMaxim Polyakov
The description for L0 and L1 was missed in the datasheet, however, configuration registers for these pads are present. In addition, the chipset contains the "GPP_L0/CSME_INTR_IN" and "GPP_L1/CSME_INTR_OUT" pads in a circuit diagram. Use all available information to add a description for the missed pads. Change-Id: I7a0488c26b3df9de1adc037d94ae290837d65dd8 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40044 Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-21libpayload/xhci: Try harder to read 32-bit caps at onceNico Huber
With commit 287cf6c7d1 (lp/drivers/usb: Work around QEMU XHCI register issue) we restructured our capability register accesses because the compiler used the wrong access size. While we do use only 32-bit types now, a compiler may still try to be clever and optimize things in unexpected ways. So we add an explicit read32() now. For instance for the 8-bit MaxPorts field, in the most significant bits of `capreg + 4`, our read + mask + shift ((cap)->hciparams1 & 0xff000000) >> 24 was turned into a single 8-bit read instruction by GCC on x86: 31: 0f b6 52 07 movzbl 0x7(%edx),%edx Change-Id: I76accd0ef718e70ca46807eb06a9177c3afd99f1 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-07-20google/trogdor: Remove write_protect_stateEric Lai
This is no longer used for chromeos.c. BUG=b:160752610 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I9a716a88ff9811fff46abca229be15522733bfef Reviewed-on: https://review.coreboot.org/c/coreboot/+/43472 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-07-20drivers/intel/gma/Kconfig: Avoid dependency hell when ignoring strapsAngel Pons
Unconditionally selecting `GFX_GMA_IGNORE_PRESENCE_STRAPS` creates a hard dependency on `MAINBOARD_USE_LIBGFXINIT`, which is undesired. Move it out of the `if GFX_GMA` block to break this unwanted dependency. TEST=Build for Librem 13v4 with no graphics init successfully. Change-Id: I53e132c209c065068f20959fa1a6f5195f5fe766 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-20sb/intel: Define CONFIG_FIXED_SMBUS_IO_BASEAngel Pons
Make it default to 0x400, which is what the touched southbridges use. Change-Id: I95cb1730d5bf6f596ed1ca8e7dba40b6a9e882fe Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-20mb/google/dedede: Update link frequency and end point structure for OV9734Pandya, Varshit B
1. Update Link frequency to 180 Mhz 2. Set data-lanes to 1 and 3. Update the clock-lane used by sensor BUG=b:155285666 BRANCH=None TEST=Build and able to capture image using user facing camera. Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Change-Id: I164cb6af1003de561be8ce640e7653b7bcb3a22f Reviewed-on: https://review.coreboot.org/c/coreboot/+/42679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-07-20mb/amd/mandolin: Delete sleep.aslRaul E Rangel
These methods are empty and the kernel treats these as optional. BUG=b:153001807, b:154756391 TEST=none Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ic8ee8fb6b6bcd04c653ab77cdc5e746a8cbd0c4a Reviewed-on: https://review.coreboot.org/c/coreboot/+/43466 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20mb/google/zork: Delete sleep.aslRaul E Rangel
These methods are empty and the kernel treats these as optional. BUG=b:153001807, b:154756391 TEST=Suspend and resume trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5f2b375c1186951f95b7ac44dc7158a0299013a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43465 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20mb/google/zork: Drop unnecessary PULL_UPs for dalboz referenceFurquan Shaikh
This change drops internal pulls for dalboz reference configured on pads which already have external pull-ups in hardware. GPIO_0(PWR_BTN_L): Pulled up to PP3300_A GPIO_2(WAKE_L): Pulled up to PP3300_A GPIO_10: Unused. Changed to PAD_NC. GPIO_11(EC_IN_RW_OD): Pulled up to PP3300_A GPIO_12(USI_INT_ODL): Pulled up to PP3300_A GPIO_16(USB_OC0_L): Pulled up to PP3300_A GPIO_17(USB_OC1_L): Pulled up to PP3300_A GPIO_21(EMMC_CMD): Pulled up to PP1800_S0 GPIO_22(EC_FCH_SCI_ODL): Pulled up to PP3300_A GPIO_31(EC_AP_INT_ODL): Pulled up to PP1800_A GPIO_32: Unused. Changed to PAD_NC. GPIO_113(I2C2_SCL): Pulled up to PP3300_S0 GPIO_114(I2C2_SDA): Pulled up to PP3300_S0 GPIO_129(KBRST_L): Pulled up to PP1800_S0 GPIO_92(CLK_REQ0_L): Pulled up to PP3300_S0 GPIO_115(CLK_REQ1_L): Pulled up to PP3300_S0 GPIO_116(CLK_REQ2_L): Pulled up to PP3300_S0 BUG=b:154351731 Change-Id: I62e9dbac7a55efa1e055983a7c126168ee516151 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43555 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-20mb/google/zork: Drop unnecessary PULL_UPs for trembyle referenceFurquan Shaikh
This change drops internal pulls for trembyle reference configured on pads which already have external pull-ups in hardware. GPIO_0(PWR_BTN_L): Pulled up to PP3300_A GPIO_2(WAKE_L): Pulled up to PP3300_A GPIO_10: Unused. Changed to PAD_NC. GPIO_12(USI_INT_ODL): Pulled up to PP3300_A GPIO_16(USB_OC0_L): Pulled up to PP3300_A GPIO_17(USB_OC1_L): Pulled up to PP3300_A GPIO_21(EMMC_CMD): Pulled up to PP3300_A GPIO_22(EC_FCH_SCI_ODL): Pulled up to PP3300_A GPIO_31(EC_AP_INT_ODL): Pulled up to PP1800_A GPIO_90: Unused. Changed to PAD_NC. GPIO_113(I2C2_SCL): Pulled up to PP3300_S0 GPIO_114(I2C2_SDA): Pulled up to PP3300_S0 GPIO_129(KBRST_L): Pulled up to PP1800_S0 GPIO_130(EC_IN_RW_OD): Pulled up to PP3300_S0 GPIO_92(CLK_REQ0_L): Pulled up to PP3300_S0 GPIO_115(CLK_REQ1_L): Pulled up to PP3300_S0 GPIO_132(CLK_REQ4_L): Pulled up to PP3300_S0 BUG=b:154351731 Change-Id: Id84b801e019eede7ef543c24aac968f3ef99b3fd Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43526 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20src: Report word-sized access for PM1a_EVTAngel Pons
According to the ACPI specification, version 6.3: Accesses to the PM1 status registers are done through byte or word accesses. The same is said about the PM1 Enable registers. Therefore, reporting dword-sized access is wrong and means nothing anyway. Since some other platforms use word-sized access, use word everywhere for consistency. Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of the patch train, both operating systems are able to boot successfully. Change-Id: I6f85c9a4126f37ab2a193c3ab50a6c8e62cf6515 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43432 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-20sb/intel/i82801dx/fadt.c: Use ACPI_ADDRESS_SPACE_IOAngel Pons
Tested with BUILD_TIMELESS=1, AOpen DXPL Plus-U remains identical. Change-Id: I80ec4d0d6a8ec0dc02b377cfa3f3b5f0362dbb6c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-07-20sb/intel/bd82x6x/fadt.c: Use definitions instead of numbersAngel Pons
Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 does not change. Change-Id: I2212a6dd4b02ac8fdcf1eafbab0226ad9faa825e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-07-20sb/intel/ibexpeak/fadt.c: Use definitions instead of numbersAngel Pons
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 does not change. Change-Id: If0ee1b65a1be67ee9f5f832f076c365017a14e6a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-07-20src: Make HAVE_CF9_RESET set the FADT reset registerAngel Pons
All supported x86 chips select HAVE_CF9_RESET, and also use 0xcf9 as reset register in FADT. How unsurprising. We might as well use that information to automatically fill in the FADT accordingly. So, do it. To avoid having x86-specific code under arch-agnostic `acpi/`, create a new optional `arch_fill_fadt` function, and override it for x86 systems. Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of the patch train, both operating systems are able to boot successfully. Change-Id: Ib436b04aafd66c3ddfa205b870c1e95afb3e846d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-07-20src: Drop useless cache flush settings in FADTAngel Pons
They are ignored if the ACPI_FADT_WBINVD flag is set, which is required on current ACPI versions and only maintained for ACPI 1.0 compatibility. Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of the patch train, both operating systems are able to boot successfully. Change-Id: Ief1219542ba71d18153b64180e0ff60bd1e7687b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-07-20soc/amd/stoneyridge: Select HAVE_CF9_RESETAngel Pons
Looks like some preparation is needed before reset. However, Picasso also needs some special handling and still selects this option without selecting HAVE_CF9_RESET_PREPARE. So, just add HAVE_CF9_RESET for now. Change-Id: I0c6da9a43a28dbee916fd6bda9ae380ebd619edf Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43388 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 15:52:43 +0000