summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-07-02nocturne: Do not set 4 LSB of SX9310 CRTL0Gwendal Grignou
These bits start the acquisition process. They should only be set by the driver. BUG=b:74363445 TEST=compile Change-Id: I9e10f5570ac82124f7f4b5cc7aaad27da0c578be Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/27265 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-02nocturne: Fix casing for register definitionGwendal Grignou
Use lower case for hex values. BUG=b:74363445 TEST=compile Change-Id: I24afea58b1a791fac3c87ad397a696f7f6e0d127 Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/27264 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-02mb/google/poppy/variants/nami: Perform PL2 setting for sonaJohn Su
According to sona thermal table, PL2 need to check cpu id. And then set PL2 value. BUG=b:110867809 TEST=The thermal team verify OK Change-Id: I5759fb3c685e3d4eef1be054541f950843d19874 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27260 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-06-30cbfstool: fix FIT entry checksum type value for ucode entriesMatt DeVillier
commit c1072f2 [cbfstool: Update FIT entries in the second bootblock] incorrectly changed the value of type_checksum_valid for microcode entries from FIT_TYPE_MICROCODE to 0, breaking microcode loading on Skylake/FSP1.1 devices (and others?). Correct this by reverting to the previous value. Test: build/boot google/chell, observe FspTempRamInit no longer fails, device boots as expected. Change-Id: Ib2a90137c7d4acf6ecd9f06cb6f856bd7e783676 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27266 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-30soc/intel/skylake: Generate ACPI RMRR tableMatt DeVillier
An ACPI RMRR table is requried for IOMMU to work properly with an iGPU (without using passthrough mode), so create one along with the DRHD DMAR table if the iGPU is present and enabled. Test: build/boot google/chell and purism/librem13v2 with kernel parameter 'intel_iommu=on' but without 'iommu=pt;' observe integrated graphics functional without corruption. Change-Id: I202fb3eb8618f99d41f3d1c5bbb83b2ec982aca4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Youness Alaoui <snifikino@gmail.com>
2018-06-30arch/x86/acpi: Add DMAR RMRR helper functionsMatt DeVillier
Add DMAR RMRR table entry and helper functions, using the existing DRHD functions as a model. As the DRHD device scope (DS) functions aren't DRHD-specific, genericize them to be used with RMRR tables as well. Correct DRHD bar size to match table entry in creator function, as noted in comments from patchset below. Adapted from/supersedes https://review.coreboot.org/25445 Change-Id: I912b1d7244ca4dd911bb6629533d453b1b4a06be Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27269 Reviewed-by: Youness Alaoui <snifikino@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-30Documentation/soc/intel: Add common code design documentMaulik V Vaghela
Add common code design document support Intel SoCs such as Skylake, Cannonlake and Apollolake onwards. Documented items: *Introduction *Design Principle *Common code development and status *Common code structure *Benifits Change-Id: I5ade390cfb41c72f812d5cc4e00e67a5964721de Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/27087 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-06-29mb/google/poppy: Fix bytes 145-146 in nayna_dimm_NT6CL256T32CM SPDT.H. Lin
nayna/NT6CL256T32CM-H1 file change byte 145/146 to be"20" for JEDEC spec BUG=b:79443146,b:109708239 BRANCH=nami TEST=emerge-nami coreboot chromeos-bootimage Test on R69.10825 with mosys Change-Id: Iadc820111f0aed34e5b46d7e23dff44cb5bb811d Signed-off-by: T.H. Lin <t.h_lin@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27275 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-29src/device: Add check for existence and validity of PCIE base address configAamir Bohra
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Change-Id: I89b0e9c927d395ac6d27201e0b3a8658e958518d Reviewed-on: https://review.coreboot.org/27263 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-29soc/intel/baytrail: Fix Kconfig for mrc.bin inclusionArthur Heymans
It used the sandybridge systemagent binary and mentioned that in the help text which is simply wrong and won't work. This copies the nb/intel/haswell/Kconfig to not include an mrc.bin by default. Change-Id: I2e151a66abc6dab710abdbb92c0c28884d88912e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27140 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-29sb/intel/i82801{g,j}x: Automatically generate ACPI PIRQ tablesArthur Heymans
Both southbridges need to be done at once since this southbridge code is used for different northbridges, which fails to compile when done separately. This needs an acpi_name functions in the northbridge code to be defined. TESTED on Intel DG43GT: show correct PIRQ ACPI entries in /sys/firmware/acpi/tables/SSDT. Change-Id: I286d251ddf8fcae27dd07011a1cd62d8f4847683 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-29sb/intel/i82801ix: Use the common ACPI pirq generatorArthur Heymans
For this to work the northbridge and lpc bridge device need acpi_name functions. TESTED on Thinkpad X200, a valid PIRQ routing in SSDT in /sys/firmware/acpi/tables/SSDT Change-Id: I62e520f53fa3f928a8e6f3b3cf33af2acdd53ed9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22980 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-28util/crossgcc: update to gcc 8.1.0 and binutils 2.30Patrick Georgi
Also update patches as necessary. Change-Id: I1e8074954d5d7a4eff590abb7439e9be7d3762aa Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/25997 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-28tianocore: Add more patchesPatrick Rudolph
* Fix building BaseTools in hostgcc v8.1.0+ * Fix buidling tianocore on gcc v7.0.0+ Change-Id: I7e2efea930b27749b1097607ab143ce2f91e79ec Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/27137 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-28crosgcc/patches: Add make patch for GLIBC glob interface v2Martin Roth
Copied from the GNU make repository author Paul Smith <psmith@gnu.org> commit 48c8a116 configure.ac: Support GLIBC glob interface version 2 Change-Id: Id70a2b98dad6349ee56985d8dd6d4f0d87b470e6 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/26939 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-28drivers/intel/fsp2_0: Fix uncountable "information"Elyes HAOUAS
Change-Id: I91e13a786b12328f1d9200f76788faa19847bbe7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-28nocturne: Fix uid and desc for sx9310Enrico Granata
This commit changes the uid and desc fields for the sx9310 entries in the devicetree to be unique, and correctly identify the position of the respective sensors. Change-Id: I501df7d3349fdebc9673c9815f5b1b2458abac6e Signed-off-by: Enrico Granata <egranata@chromium.org> Reviewed-on: https://review.coreboot.org/27248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
2018-06-28amd/common/pi: Remove AGESA support files from bootblockMarshall Dawson
The stoneyridge bootblock no longer makes AGESA calls. Remove the support files from the bootblock build. TEST=boot Grunt Change-Id: I14d2336d5fb766a1acf5e812337ae0ab3ca4a6c1 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/27255 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-28amd/common/pi: Remove obsolete heapmanager workaroundMarshall Dawson
Remove residual code that allowed successful building of the heapmanager code. Now that stoneyridge no longer makes AGESA calls in bootblock, it is safe to elimate the workaround. BUG=b:74518368 TEST=boot Grunt Change-Id: Ie169a691a177bcd8283c31c8188ce28bcbce82af Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/27254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-28mb/*/*/cmos.layout: Fix coding styleElyes HAOUAS
Change-Id: I4f82482595b0e6c6159c6e1c66158bc18b061f04 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27216 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-28fsp_broadwell_de: Add ability to set PCIe completion timeoutDavid Hendricks
This enables the user to set the completion timeout value in PCI Express Device Control 2 register via devicetree.cb. Based on corebootBDE-270-iou-complto.patch in Arista EOS 4.20 release. Change-Id: If0527899bc2047d0e57c11f7801768d07f9a5179 Signed-off-by: David Hendricks <dhendricks@fb.com> Reviewed-on: https://review.coreboot.org/26225 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-06-28arch/x86: include verstage.c only when verstage is a separate stageArthur Heymans
Change-Id: Ia75205001f2443cb8221a0762f182aae01ee615e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/26924 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-28soc/intel/skylake: clear MCA before booting to OSPratik Prajapati
mca_configure needs to be called for each core before booting to OS, else OS would keep dumping MCEs Change-Id: I95ca46fda7be65d74714bdb344e339922cbb6305 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/26392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-06-28intel/common: change mca_configure API's defPratik Prajapati
add an unused param so that mca_configure can be called by mp_run_on_all_cpus to run it on all cores. Change-Id: I2395ee7fbedc829f040959b0021967f800693eeb Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/26391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-06-28devicetree: Add method to delete property by namePatrick Rudolph
Will be used on Cavium SoC to delete devicetree entries that aren't available with the board/configuration. Change-Id: I7c58a2411206bca62d0e96fa627530e937383ac9 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/26693 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-06-28smm: Add canary to end of stack and die() if a stack overflow occursRaul E Rangel
If CPU 0's stack grows to large, it will overflow into CPU 1's stack. If CPU 0 is handling the interrupt then CPU 1 should be in an idle loop. When the stack overflow occurs it will override the return pointer for CPU 1, so when CPU 0 unlocks the SMI lock, CPU 1 will attempt to return to a random address. This method is not foolproof. If code allocates some stack variables that overlap with the canary, and if the variables are never set, then the canary will not be overwritten, but it will have been skipped. We could mitigate this by adding a larger canary value if we wanted. I chose to use the stack bottom pointer value as the canary value because: * It will change per CPU stack. * Doesn't require hard coding a value that must be shared between the .S and .c. * Passing the expected canary value as a parameter felt like overkill. We can explore adding other methods of signaling that a stack overflow had occurred in a follow up. I limited die() to debug only because otherwise it would be very hard to track down. TEST=built on grunt with a small and large stack size. Then verified that one causes a stack overflow and the other does not. Stack overflow message: canary 0x0 != 0xcdeafc00 SMM Handler caused a stack overflow Change-Id: I0184de7e3bfb84e0f74e1fa6a307633541f55612 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27229 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-28mediatek/mt8183: Remove the stub flash driver that planned to use eMMCTristan Shieh
The stub flash driver is a temporary hack that planned to adapt eMMC to SPI flash. Remove the hack since SPI flash is what we really expect. BUG=b:80501386 BRANCH=none TEST=Boots fine on Kukui Change-Id: If29869461fc8c2efe26bb8c901737ee85935d27f Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/27114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2018-06-28mb/google/poppy/variants/nautilus: Use GPP_B20 to determine SKUSeunghwan Kim
We would use GPP_B20 instead of board id to determine nautilus SKU. BUG=b:80052672 BRANCH=poppy TEST=Verified the new coreboot could determine SKU correctly Change-Id: I1978b544eef7a184a3da191306ee32d862fa8c36 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27220 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-28mb/google/octopus: Create bobba variantJustin TerAvest
This creates a bobba variant for octopus. The devicetree overrides are copied from fleex, otherwise everything just defaults to baseboard settings. BUG=b:110781720 TEST=None Change-Id: Ic30c6b0d955ce26f4a9f40cd7fef1c429ab950fc Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/27223 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-28mb/google/poppy/variants/nocturne: Update TSR sensor infoSumeet Pawnikar
This patch updates TSR sensor info with appropriate names. Also, updates Charger effect with correct TSR sensor mapping. BUG=None BRANCH=None TEST=Build coreboot for Nocturne board. Change-Id: Ia3bbc78f8d823e88a91265e0d55c5ac2a4ea31a9 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/27210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-06-28vboot: Fix linking error with USE_OPTION_TABLE enabledPatrick Rudolph
Fix a linking problem with VBOOT and USE_OPTION_TABLE enabled. Make use of cbfs_locate_file_in_region() and always search the cmos_layout.bin in the 'COREBOOT' region. With this change applied there's no need to include the vboot_locator in SMM any more, we can't break NVRAM with different CMOS layouts, and we keep VBOOT and non VBOOT behaviour the same. Only include cmos_layout.bin and cmos.default in RO region. Add notes explaining the decisions. Tested on Intel Sandybridge, builds and boots with vboot enabled. Change-Id: I10ae94d7936581bbb5ea49384122062bd4934ea5 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/26863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-28soc/intel/common/block: Move p2sb common functions into block/p2sbSubrata Banik
This patch cleans soc/intel/{apollolake/cannonlake/skylake} by moving common soc code into common/block/p2sb. BUG=b:78109109 BRANCH=none TEST=Build and boot KBL/CNL/APL platform. Change-Id: Ie9fd933d155b3fcd0d616b41cdf042cefe2c649a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-28Documentation: Add Gigabyte to list of mainboardsAngel Pons
Gigabyte was not in the list of vendors in the mainboard-specific documentation. This made a newly added mainboard page difficult to locate. This commit adds Gigabyte and links said mainboard in the mainboard-specific documentation main page. Change-Id: I8839e1c1176fbdc3dd9da616f68c58e8e1cf1b16 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/27045 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-06-28soc/intel/apollolake: Remove dead filesFurquan Shaikh
Change a86d1b8 (soc/intel/common: Add SMM common code for Intel Platforms) moved APL to use common SMM code. However, smi.c and smm.h files under soc/intel/apollolake/ were not removed. This change removes the dead files since they are not used anymore. BUG=b:110836465 Change-Id: I1ff213372521fd47e2335de6a4b438d16c74ecd3 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27252 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-28soc/intel/common: Disable GPEs just before enabling SMIsFurquan Shaikh
Call to pmc_disable_all_gpe is required before enabling SMIs to ensure that we do not end up in a recursive SMI handler loop as mentioned in change 74145f7 (intel/common/pmc: Disable all GPEs during pmc_init). Thus, this call was added at the end of pmc_fill_power_state as we want to ensure that all the GPE registers are backed up before being cleared for identifying the wake source in ramstage. This resulted in a side-effect on APL where pmc_fixup_power_state was called much later in the boot process. Even though we have got rid of pmc_fixup_power_state, this change moves the call to pmc_disable_all_gpe to happen just before enabling SMIs. This helps to keep the disabling of GPEs logically before the enabling of SMIs and any clean ups that happen in pmc or soc-specific code should not affect the state of GPEs. BUG=b:110836465 TEST=Verified that wake sources are correctly identified on KBL and APL. Also, no SMI handler issues observed when resuming. Change-Id: I122a8118edcec117f25beee71a23c0a44ae862ed Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-28soc/intel/common/block/pmc: Get rid of pmc_fixup_power_stateFurquan Shaikh
Now that APL does not need pmc_fixup_power_state, this function can be removed from the PMC common code as well. BUG=b:110836465 Change-Id: I94de41f3e52228bca4b7a5579afe5a23719429be Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-28soc/intel/apollolake: Remove call to pmc_fixup_power_stateFurquan Shaikh
On APL, call to pmc_fixup_power_state was added because GPE0_EN registers did not have the right bits set on resume from S3 -- this was a result of GPE_CFG registers getting reset to their default state on resume. GPE_CFG registers are programmed as part of pmc_gpe_init which was previously done only in ramstage. However, with change a673d1c (soc/intel/apollolake: Initialize GPEs in bootblock), call to pmc_gpe_init was added to bootblock which means that GPE_CFG registers will have the right state by the time control reaches romstage where pmc_fill_power_state is called. Thus, call to pmc_fixup_power_state is totally redundant and in fact leads to side-effects because of the call to pmc_disable_all_gpe at the end of pmc_fill_power_state. BUG=b:110836465 TEST=Verified on yorp that wake source is correctly identified on resume from S3. Change-Id: Ia63ddbe381ce8a59736c231d745fd71d008d5d92 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27249 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-27smm: Switch from %edx to %ebxRaul E Rangel
%edx gets clobbered before the c handler is invoked. This is just a cleanup cl to make the next cl look clean. BUG=b:80539294 TEST=verified SMI still works on grunt. Change-Id: I21bf41ed4fdeaaa8737c883f202a39cb57c2b517 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27228 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-27smm: Push a null stack base pointerRaul E Rangel
When generating a backtrace we need an indicator when we have hit the beginning of the stack. The i386 ABI states that %ebp points to the next stack frame. NULL can be used to indicate the end of the stack. We could add a NULL return pointer at %ebp+4, but I decided to omit it since a NULL stack pointer can be used as an indicator that there is no return pointer. BUG=b:80539294 TEST=built and tested on grunt Change-Id: I8a48114d31a5c716335d264fa4fe4da41dc5bf11 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27226 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-27smm: Make local variables relative to ebpRaul E Rangel
This reduces the cognitive overhead of referencing locals via esp since it changes with every push. BUG=b:80539294 TEST=built and booted on grunt. Change-Id: Ib7eb98ce3483d4fc803696c1b2496d8384317536 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27225 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-06-27smm: Clear SMRAM when debuggingRaul E Rangel
This makes it easier to spot unused RAM. BUG=b:80539294 TEST=built and tested on grunt. Verified unused memory was set to 0xcdcdcdcd Change-Id: I335eaf642bd8526f31819eaac95ce80c2df3c300 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-06-27mb/google/*: Add a few VBT filesMatt DeVillier
These files are directly extracted from the vendor firmware Change-Id: I1f05c913872c5d2d8c8279d89eac52fd4bf4e35e Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27222 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-27drivers/intel/fsp1_1: Fix vbt_len typeMatt DeVillier
Type of vbt_len should be size_t, change to fix compiler error Change-Id: I22798fa0edb98fcb9acc1b2dd52f34a61bc511e9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-27cpu/intel/p4-netburst: skip caching rom on model_fxxArthur Heymans
An unidentified combination of speculative reads and branch predictions inside WRPROT-cacheable memory can cause invalidation of cachelines and loss of stack on models based on NetBurst microarchitecture. Therefore disable WRPROT region entirely for all family F models. As an extreme example, just changing the location of a constant string passed to printk() has been witnessed to make a the boot fail early on in romstage. Change-Id: I1df84ad55e2d8d6d4e8dca10125131b5f525f0d7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27133 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-06-27x86/car: Replace reference of copy_and_run locationKyösti Mälkki
For cases with POSTCAR_STAGE=y this reference pulled in the implementation of run_ramstage() which we would not call. Using _program results with the same region being marked as WRPROT-cacheble. Change-Id: Ie1eaf6f5bb8baa13e946112c4fc3d854dbf750a3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/27232 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Keith Hui <buurin@gmail.com>
2018-06-27lib/rmodule: Fix indentationKyösti Mälkki
Change-Id: Ieb809a078356f696afd813c39c65da1d7c7482c8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/27231 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-27stage_cache: Disable when APCI S3 is not possibleKyösti Mälkki
Don't consume CBMEM for stage cache when we would never use it. Change-Id: I606e0457ff3085822554c4041fc56f0d28cc9c2d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/27230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-26arm64: Reimplement mmu_disable() in assemblyJulius Werner
Disabling the MMU with proper cache behavior is a bit tricky on ARM64: you can flush the cache first and then disable the MMU (like we have been doing), but then you run the risk of having new cache lines allocated in the tiny window between the two, which may or may not become a problem when those get flushed at a later point (on some platforms certain memory regions "go away" at certain points in a way that makes the CPU very unhappy if it ever issues a write cycle to them again afterwards). The obvious alternative is to first disable the MMU and then flush the cache, ensuring that every memory access after the flush already has the non-cacheable attribute. But we can't just flip the order around in the C code that we have because then those accesses in the tiny window in-between will go straight to memory, so loads may yield the wrong result or stores may get overwritten again by the later cache flush. In the end, this all shouldn't really be a problem because we can do both operations purely from registers without doing any explicit memory accesses in-between. We just have to reimplement the function in assembly to make sure the compiler doesn't insert any stack accesses at the wrong points. Change-Id: Ic552960c91400dadae6f130b2521a696eeb4c0b1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-26arm64: Switch remaining uses of __ASSEMBLY__ to __ASSEMBLER__Julius Werner
Some arm64 files that were imported from other projects use the __ASSEMBLY__ macro to test whether a header is included from a C or an assembly file. This patch switches them to the coreboot standard __ASSEMBLER__, which has the advantage of being a GCC builtin so that the including file doesn't have to supply it explicitly. Change-Id: I1023f72dd13857b14ce060388e97c658e748928f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-26arm64: Drop dead file stage_entry.SJulius Werner
This file has been dead since commit 7dcf9d51 (arm64: tegra132: tegra210: Remove old arm64/stage_entry.S), I just forgot to remove it. Change-Id: I0dd6666371036ecd42c1b256dbbe22a01ae959b8 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-26cheza: Fix Kconfig TPM itemsT Michael Turney
TPM config items added upstream before ready SPI/TPM is not functional on Cheza yet Change-Id: I302e00014dc31279fe2574765763ecdbf326b449 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/27213 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-26util/crossgcc: Allow building a new gcc against new binutils with -DPatrick Georgi
With -D, the newly built toolchain isn't installed into $prefix/... but into $DESTDIR/$prefix/... while being built for $prefix alone. This is useful for distributions, but it breaks down when the build host already has the toolchain installed in $prefix without proper build isolation (cf. gentoo): In such cases libgcc etc are built using the new compiler (as gcc's build system is smart enough to state the path explicitly), but that compiler then uses its regular algorithm to determine the path to as, ld, ... That makes it use the tools from $prefix, which might differ in formats (assembly, certain object file flags, ...): nds32le-elf in particular has rather unstable formats still, and so new compilers can't work with old binutils. The approach to deal with this is to take an unused path that's specified by gcc's build system ($out/gcc/$arch/$version) and symlink it to the new toolchain - these explicitly given directories take precedence over the default search path, and so the new binutils are used. Change-Id: Ia9a262e73f56cd486a2ae07422b598c205a03aed Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/27241 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-26mb/google/octopus: Enable logging of EC wake sources in S0ixFurquan Shaikh
This change adds GSMI callback elog_gsmi_cb_mainboard_log_wake_source to enable logging of EC wake events in S0ix. BUG=b:79449585 TEST=Verified that S0ix entry/exit events are added to eventlog: =========== Lid open ================ 62 | 2018-06-25 14:02:36 | S0ix Enter 63 | 2018-06-25 14:02:56 | S0ix Exit 64 | 2018-06-25 14:03:26 | Wake Source | GPE # | 15 65 | 2018-06-25 14:03:32 | Wake Source | GPE # | 65 66 | 2018-06-25 14:03:37 | EC Event | Lid Open Change-Id: Icc8cd3624966ff66d2cf189871e452cf650cec40 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27235 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-26soc/intel/apollolake: Enable logging for wake sources in S0ixFurquan Shaikh
This change adds GSMI callback elog_gsmi_cb_platform_log_wake_source to enable wake source logging from S0ix on APL/GLK. Additionally, elog.c is added to smm stage. BUG=b:79449585 TEST=Verified that S0ix entry/exit events are added to eventlog: =========== Power button ============ 59 | 2018-06-25 14:01:11 | S0ix Enter 60 | 2018-06-25 14:01:30 | S0ix Exit 61 | 2018-06-25 14:02:00 | Wake Source | Power Button | 0 =========== Lid open ================ 62 | 2018-06-25 14:02:36 | S0ix Enter 63 | 2018-06-25 14:02:56 | S0ix Exit 64 | 2018-06-25 14:03:26 | Wake Source | GPE # | 15 65 | 2018-06-25 14:03:32 | Wake Source | GPE # | 65 66 | 2018-06-25 14:03:37 | EC Event | Lid Open =========== Trackpad ================ 67 | 2018-06-25 14:04:20 | S0ix Enter 68 | 2018-06-25 14:04:33 | S0ix Exit 69 | 2018-06-25 14:05:03 | Wake Source | GPE # | 15 70 | 2018-06-25 14:05:08 | Wake Source | GPE # | 66 Change-Id: I005de58c73d00dc9d7e64f1459f6d786792b94db Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27234 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-26soc/amd/stoneyridge/southbridge.c: Fix get_index_bit limit checkRichard Spiegel
Limit is the maximum number of bits to be tested, however it's being checked against the number of bytes of uint32_t. when it should be number of bits. Create a macro to provide the number of bits, and use it instead of sizeof. BUG=b:75996437 TEST=Add debug messages to see code passing beyond the check, build and boot grunt, check that it passed the limit check, remove debug code. Change-Id: Id1dfda26d789183b346b20c37fec923d996b80db Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27162 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-06-26opencellular/rotundu: Add mainboard supportHong Gan
Adds Open Cellular rotundu mainboard supports. Working: - 2x Ethernet support - MSATA support - CPU init - Memory init - USB support - EMMC but disabled Not working: - TPM support Create directory structure and Kconfig files for OpenCellular Rotundu and copy sources from intel/minnowmax. Change-Id: I391d4bdd485f4bf5396c764fe3f11d98369593e4 Signed-off-by: Hong Gan <hgan@fb.com> Signed-off-by: David Hendricks <dhendricks@fb.com> Reviewed-on: https://review.coreboot.org/22894 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-06-26facebook/watson: Initial commitDavid Hendricks
This adds another camelbackmountain_fsp derivative, along with a .fmd file for the board. For now it's been tested to build and boot. Change-Id: I9e8804264967c19f6b51fc44575b0db36f600f88 Signed-off-by: David Hendricks <dhendricks@fb.com> Reviewed-on: https://review.coreboot.org/25884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-06-26cbfstool: Update FIT entries in the second bootblockRizwan Qureshi
Once a second bootblock has been added using topswap (-j) option, Update the entries in second FIT using -j option with update-fit command. Additionally add a -q option which allows to insert the address of a FMAP region (which should hold a microcode) as the first entry in the second FIT. BUG=None BRANCH=None TEST= Create ROM images with -j options and update FIT using -q option. example: ./build/util/cbfstool/cbfstool coreboot.tmp create \ -M build/fmap.fmap -r COREBOOT,FW_MAIN_A,FW_MAIN_B,RW_LEGACY build/util/cbfstool/cbfstool coreboot.tmp add \ -f build/cbfs/fallback/bootblock.bin -n bootblock -t \ bootblock -b -49152 -j 0x10000 build/util/cbfstool/cbfstool coreboot.tmp add-master-header -j 0x10000 build/util/cbfstool/cbfstool coreboot.tmp add -f build/cpu_microcode_blob.bin \ -n cpu_microcode_blob.bin -t microcode -r COREBOOT -a 16 build/util/cbfstool/cbfstool coreboot.tmp. update-fit \ -n cpu_microcode_blob.bin -x 4 -j 0x10000 -q FW_MAIN_A Also try the failure scenarion by providing invalid topswap size. Change-Id: I9a417031c279038903cdf1761a791f2da0fe8644 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/26836 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-26cbfstool: add an option for creating a topswap bootblockRizwan Qureshi
Add an option '-j' which takes the size of topswap boundary. This option serves both as a bool and a size for creating a second bootblock to be used with topswap feature in Intel CPUs. '-j' is also used in conjunction with add-master-header to update the location of cbfs master header in the second bootblock. BUG=None BRANHC=None TEST=add bootblock entry to the image with -j option specifying different topswap sizes and also use the -j option for add-master-header. Change-Id: I3e455dc8b7f54e55f2229491695cf4218d9cfef8 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/22537 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-25mb/google/kahlee/variants/grunt: Select low-power mode for BayHub720Simon Glass
Put the PCIe clock pins in power-saving mode for the BayHub eMMC bridge to save power. This requires use of an additional register (Misc control register 2) and another bit in the existing 'protect' register. The naming of bit 0 of that register is incorrect, based on the latest datasheet (14 June 2018) so fix that too. BUG=b:73726008 BRANCH=none TEST=boot without this patch: iotools mem_read32 0xfed80e00 0x0046ffff With this patch: $ iotools mem_read32 0xfed80e00 0x00463fff Also see that the PCIe clock stops when eMMC is idle and can be started by starting disk activity. Change-Id: I5ad1467b2e2e151215d2dfd2ce48cd4a451fe480 Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-on: https://review.coreboot.org/26515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-06-25util/abuild: Enable abuild to compile a single variantFurquan Shaikh
There are many boards in coreboot which support multiple variants. When abuild is used to compile a single target, it builds all its variants. If a target has 5 variants, then abuild takes nearly 10x the time to compile all variants of the target. This change adds an option -b/--board-variant to enable abuild to compile only a single variant of the target. TEST=Verified: 1. abuild builds all variants of the target if -b option is not provided. 2. abuild builds a single variant if -b option is provided. 3. abuild prints appropriate error message if invalid variant name is provided. Change-Id: I3781568c6409c5ec2610a8386a21d86037428e7f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27215 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-25mb/google/octopus: Use the newly added override devicetree featureFurquan Shaikh
Now that sconfig is able to support variant-specific override trees, this change updates octopus boards to use this feature. Following devices are moved from baseboard devicetree to variant specific devicetree: 1. Touchscreen 2. Trackpad 3. Digitizer 4. Audio codec BUG=b:80081934 TEST=Verified that the right devices show up in static.c for each variant. Change-Id: I8df0cdf4dbcd7613aa4ef4042c272eca2915da9e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27219 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-25util/sconfig: Get rid of ops from struct deviceFurquan Shaikh
"ops" field was used in device structure only to add default_dev_ops_root for root device. It was always set to NULL for all other devices. This change gets rid of ops field from struct device and instead hardcodes default_dev_ops_root in pass1 for root device. BUG=b:80081934 TEST=Verified that static.c generated with and without this change is exactly the same. Change-Id: I0848788610c2ed27274daf4920de3068a9784d4c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27209 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-25util/sconfig: Add support for overriding base tree properties/nodeFurquan Shaikh
This change adds support to allow variants to override the devices and properties in base device tree by providing an override device tree. It works as follows: 1. Both base and override device trees are parsed from provided input files. 2. Walk through the trees in lockstep fashion using depth-first traversal checking if a node in override tree has a matching node in base tree. - If matching node is found, then update the properties of base node using the override node. Continue walking the children of the nodes. - If matching node is not found, then copy the entire override subtree of the node under the current base parent. In addition to that, chip instance pointers of the nodes in override tree need to be updated if they were pointing to the override parents chip instance. Since chip always expects a device to be present, it leads to a side-effect that overriding chip registers requires that a device is always provided for the chip in the override tree as well. BUG=b:80081934 Change-Id: I6604e4f8abe3fc48240e942fea32da96031e1e46 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27206 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-25Kconfig: Add new config for OVERRIDE_DEVICETREEFurquan Shaikh
This change adds a new config option OVERRIDE_DEVICETREE that allows variants to provide an override devicetree file to override the registers and/or add new devices on top of the ones provided by baseboard devicetree using CONFIG_DEVICETREE. BUG=b:80081934 Change-Id: Ica046b7e0d70d0f1e8d94da714d1e62032277916 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/26691 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-25mb/google/poppy/variants/nami: Prevent leakage with touchscreen on PantheonCrystal Lin
We found GPP_C3 keeps high when system in S0ix mode. It caused 1.8V leakage. To fix this problem, add GPP_C3 into config for Pantheon Synaptics touchscreen. BUG=b:78436458 BRANCH=None TEST=Let DUT in S0ix mode and check GPP_C3 is normal. Change-Id: Idb2dab93178af1dae54265e49522b473b69a35af Signed-off-by: Crystal Lin <crystal_lin@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27177 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-25util/sconfig: Enable parsing of override device treeFurquan Shaikh
This change allows sconfig utility to accept an extra optional parameter to specify override device tree that can be used to override the properties or add new devices in addition to that provided by base device tree. This is helpful for variants that share most of the devicetree but have to override certain registers or add some devices which might not be applicable to base devicetree. In order to support the override devicetree, following changes are made in this CL: 1. override_root_dev and override_root_bus are provided. 2. main() function is updated to accept an optional argument. 3. If override device file is provided, then parse_devicetree is called for override_devtree as well. This change in itself does not provide the override feature. It is only a small step towards the final goal. The override devicetree parsed by sconfig is currently unused. BUG=b:80081934 Change-Id: I477e038c8922ae1a9ed5d8bf22a5f927a19a69c7 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/26689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-25mb/google/octopus/variants/baseboard: Update DPTF parametersSumeet Pawnikar
This patch updates DPTF parameters for Octopus baseboard. BUG=b:79779737 BRANCH=None TEST=Build coreboot for Octopus board. Change-Id: I1456b7b9ee9e02491c66b0709c710e1a7ec08cc5 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/27027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-25nb/lenovo/t400: Enable libgfxinitArthur Heymans
Change-Id: I243c22c83a5575c2e1500cc869c41691c4fba415 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-06-25mb/google/nami: Enable xDCIShelley Chen
This change enables xDCI controller on nami. BUG=b:110443736 BRANCH=None TEST=None Change-Id: Ieb63e0d65ac1a142c151a3f93afe306b80a5d99a Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/27181 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-25util/lint/checkpatch_json: Fix checkpatch output keyword match stringNaresh G Solanki
From checkpatch output, look for keywords starting with 'ERROR:' & 'WARNING:' . Also check for keywork ': FILE:' instead of the same without the colon (:). BUG=None BRANCH=None TEST=Check if patch https://review.coreboot.org/#/c/coreboot/+/22537/21 is processed & json output is generated properly. Change-Id: Ib690ab34a1ffabc4f83642634fd34beea16a64dc Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/27170 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-25sb/intel/common/firmware: Enable me_cleaner for NehalemNicola Corna
Recent patches in coreboot have fixed the freeze issues related to the use of me_cleaner on Nehalem. However, at least on the Lenovo X201, with me_cleaner some PCIe devices (like the SATA and USB controllers) disappear. In particular, setting the AltMeDisable bit ("-S" or "-s" flag) makes them disappear completely, while unsetting it makes them disappear only during cold boots. This kind of behaviour was already observed by Youness Alaoui on the Purism Librem laptops ([1]), and it seems related to some required board-specific PCIe configuration in the ME's MFS partition. For this reason, on the Lenovo X201, "-w EFFS" has been added to the me_cleaner arguments, which whitelists the MFS-equivalent partition for ME generation 2. This fixes all the issues, and the PCIe devices work as expected. [1] https://puri.sm/posts/deep-dive-into-intel-me-disablement/ Change-Id: Ie77a80d2cb4945cf1c984bdb0fb1cc2f18e82ebc Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/27178 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-25intel/skylake: nhlt: Add capture config for echo ref stream for Max98373 CodecSathyanarayana Nujella
During Speaker playback, quad Channel I/V feedback data is captured from SSP0 Rx. Out of these 4-channels, Stereo V-Sense data needs to be given as echo ref stream. So, adding stereo capture config to max98373_capture_formats. BUG=b:110074225 TEST='Audio playback and Capture Stereo echo ref data' Change-Id: I6fe619ece94d5011caffe37ef10b48f956938db9 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/27182 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-24drivers/i2c/alps: Get rid of i2c/alps driverFurquan Shaikh
i2c/alps driver implementation is an exact copy of the i2c/hid driver with only the addition of ALPS0001_HID. This can be supported by the i2c/hid driver using the hid field in devicetree which is what glkrvp mainboard does. So, this change removes the i2c/alps driver which is anyways unused. Change-Id: I60761c384f3d800532b2b346272da7be28b77acd Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-24drivers/i2c/sx9310: Check for config not being NULL before using itFurquan Shaikh
This change fixes the issue reported by Coverity CID 1393576 to ensure that config is checked for NULL before it is actually used. Change-Id: I5f0cd2bf2437fc640f4cf8d8203a971daf1f8d17 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27207 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Enrico Granata <egranata@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-23mb/asus/p8h61-m_pro: Add new mainboardAngel Pons
Tested with GRUB 2.02 as a payload, booting Arch Linux as well as Debian. This code is based on the output of autoport as well as other mainboards supported in coreboot already. Working: - Serial port I/O - S3 suspend/resume. Untested with SeaBIOS since it failed to resume on a similar board. It is likely to be due to low memory corruption, but I have not worked on it. - USB ports and headers - USB3 ports attached to the ASM1042 controller. SeaBIOS can boot from them, and it is likely GRUB can detect devices on those ports as well. The chip has a small SPI flash nearby, which seems to hold an Option ROM. - Gigabit Ethernet - Integrated graphics (libgfxinit) - VGA BIOS for integrated graphics init - PCIe x16 graphics - PCIe x1 - SATA controller - Hardware Monitor - Fan Control (fancontrol on linux works well) - Native raminit - flashrom, using the internal programmer. Tested with coreboot, as well as with the vendor firmware. - NVRAM settings. Only debug_level has been tested. Untested: - DVI port. It can detect a "fake" display, that is, an EEPROM connected to the DVI port. Thus, gma-mainboard.ads has been setup accordingly. - PS/2 port. - Audio: Only rear output (green) has been tested. - EHCI debug. - Parallel port header. - Non-Linux OSes - ACPI thermal zone and fan control (probably not working) Not working: - Booting from devices attached to the ASM1061 controller. Devices on ports work fine once Linux has loaded. - Any SATA devices with Tianocore (payload issue) Change-Id: I7e89ebe43a2e1ff0308f4876e98bbf2f5a0d85f2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/26419 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-23nb/intel/i945: Remove dead codeElyes HAOUAS
Regarding "Intel 945G/945GZ/945GC/945P/945PL Express Chipset Family", Document Number: 307502-005, page 91, if Channel B is empty, all of the C1DRBs are programmed with the same value as C0DRB3. Mobile 945 express chipset datasheet doesn't mention this specific case. Change-Id: Ic26103aac7f920e5696b445e125d33405df4f43b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27204 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-23mb/google/poppy/variants/atlas: Add two new Samsung memory optionsCaveh Jalali
- add K4E6E304EC-EGCF and K4EBE304EC-EGCF to memory strapping table BUG=b:110498646 BRANCH=none TEST=none Change-Id: Iddacdf1e1d0e2bae0c6168c86e54f5f602cd9d19 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27184 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-23mb/google/poppy/variants/atlas: add GPIO for bluetooth enableCaveh Jalali
This configures a GPIO pin for enabling/disabling bluetooth on the next version of the atlas board. The default is for bluetooth to be enabled at this point. BUG=b:110614620,b:110613353 BRANCH=none TEST=none Change-Id: I4ba940e89b1dc03548b7ab44b8f84dc9a3097acb Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27185 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-23soc/intel/cannonlake: Disable UART_DEBUG by defaultSubrata Banik
This patch ensures serial debug is not enabled by default on Cannonlake platform. Change-Id: Id925c8c73971a027e45ea3c61e878f134bc9feff Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/27205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-22mb/google/poppy/variants/nami: Fix non-working thermal sensor QT2 PSVJohn Su
Modify DPTF TRT parameters to solve thermal sensor QT2 PSV problem. BUG=b:109941652 TEST=The thermal team verify OK Change-Id: Id9d39d8282712a0341fea10f74c0e40bb1ac9d7c Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-22mb/google/octopus: Update GBB_FLAG_DISABLE_EC_SOFTWARE_SYNCFurquan Shaikh
Move GBB_FLAG_DISABLE_EC_SOFTWARE_SYNC under each variant config and select it for bip and fleex only. Functional change in this CL is that EC SW sync will be enabled for phaser. BUG=b:110523400 Change-Id: If6f37c6b2ee71130b9ed5b10ce92fb23fa1c39fc Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27179 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-22sdm845: increase SRAM for bootblockT Michael Turney
Bootblock has grown beyond 32K, grow to 40K Change-Id: Iedc52151e223ebf4ff5b35a419b5378a6f1c661b Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/26760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-06-22libpayload: cheza - fix config for chromium chroot buildT Michael Turney
Add CONFIG_LP_CHROMEOS to configuration file Change-Id: I528dee96cf5052b99b8f7573010d98fd80680688 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/26711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-22drivers/fsp1_1: fix VBT Loading by using GMA common functionMatt DeVillier
Commit 77034fa [intel/common: compress VBT] compressed vbt.bin in CBFS, but only changed the loader in soc/intel/common, forgetting the separate one used by FSP 1.1. As the soc/intel/common loader has now been rolled into the one in drivers/intel/gma, replace the VBT loader used by FSP 1.1 with the GMA one. Also, remove 2 now-unused header files. Test: build/boot google/chell, observe display initialized prior to OS load, no FSP warning in cbmem console due to invalid VBT signature. Change-Id: Iba882ee4d9e83dcd88bdf7dd2f5591f66005a3fe Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-22mb/google/poppy/variants/nocturne: Hook up the SX9310 proximity sensor.Enrico Granata
Change-Id: I7358ee34df873098a86d692cc8a909b0ec5023a8 Signed-off-by: Enrico Granata <egranata@chromium.org> Reviewed-on: https://review.coreboot.org/27172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-22drivers/i2c: Add a driver for Semtech SX9310Enrico Granata
This adds a new driver for the SX9310 proximity detector device. The purpose of this is to enable the device's calibration information to be stored in firmware, and then transferred over to the kernel via ACPI. This device has more than 10 individual configuration parameters, so they would not fit in the generic driver's properties table. Change-Id: Id8c434eec9fe2da731e142442503a12e88db2236 Signed-off-by: Enrico Granata <egranata@chromium.org> Reviewed-on: https://review.coreboot.org/27173 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-22cbfstool/fit.c: Fix for older CPUs without total_size in mcu_headerArthur Heymans
Some older CPUs have a fixed size of 2048 bytes for microcode total size. Change-Id: Ia50c087af41b0df14b607ce3c3b4eabc602e8738 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27090 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-22soc/intel/cannonlake: Remove DMA support for PTTSubrata Banik
Alternative buffer communication support for PTT is no longer needed for CNL onwards and coreboot does not need to reserve additional 4KiB memory for PTT support. Change-Id: I11993cef77fd5e879eedabc1ed344f91f8257c90 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/27176 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-22soc/intel/common/block/cpu: Add option to skip coreboot AP initSubrata Banik
SoC users from IOTG team is looking forward for a solution to skip coreboot AP initialization flow and make use of FSPS-UPD to perform AP reset. TEST=Assign use_fsp_mp_init=1 to ensure coreboot is not bringing APs out of reset. Change-Id: Ibc8cd411e802fb682436a933073922b2693ba994 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21inteltool: Add PCI IDs for the C220 PCH seriesqeed
Adds missing PCI IDs to allow tool to dump the C220 PCH (8 series) southbridge. Intel Document 328904 is the datasheet for this PCH. Change-Id: I07a8f2e9cb0ee8677c8fe2c51881147ed81c1a35 Signed-off-by: Quan Tran <qeed.quan@gmail.com> Reviewed-on: https://review.coreboot.org/27168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-21tianocore: Fix RPM package namePatrick Rudolph
The packge uuid-devel doesn't provide the required files, but libuuid-devel does. Change-Id: I61d537e4f1fca0d7172c129a75e13aa58452763f Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/27136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-21soc/intel/apollolake: unify definition for spi base addressBora Guvendik
Use SPI_BASE_ADDRESS instead of PRERAM_SPI_BASE_ADDRESS like big core in order make common code implementation straightforward. Change-Id: Ibcb013fc95de29234253e89c9ca100cc468d44f6 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/27097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21soc/intel/common: Make infrastructure ready for Intel common stage filesSubrata Banik
Select all Kconfig belongs into Intel SoC Family basecode/stage files and include required headers from include/intelbasecode/ files. BUG=None BRANCH=none TEST=Code is compiling with cannonlake configurations and also booting on cannonlake RVP. Change-Id: Iac99b4346e8bf6e260b00be9fefede5ad7b3e778 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/25734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-21sb/intel/i82801xx: Use common RCBA MACROsArthur Heymans
Change-Id: I61fb3b01ff15ba2da2ee938addfa630c282c9870 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-21sb/intel/common/rcba_pirq.c: Use common RCBA acces MACROsArthur Heymans
Change-Id: I2fe8d8388cb96e42af4f9be251a41cceeb2e4710 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27042 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21sb/intel/common: Make RCBA manipulation MACROs commonArthur Heymans
No Change in BUILD_TIMELESS. Change-Id: I634526269d45ebdc6c31cdc28d9ec846b397211d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-21Revert "sb/intel/{bd82x6,ibexpeak}: Move RCBA macros to a common location"Arthur Heymans
In the end it does not look like RCBA register offsets are fully compatible over southbridges. This reverts commit d2d2aef6a3222af909183fb96dc7bc908fac3cd4. Is squashed with revert of "sb/intel/common: Fix conflicting OIC register definition" 8aaa00401b68e5c5b6c07b0984e3e7c3027e3c2f. Change-Id: Icbf4db8590e60573c8c11385835e0231cf8d63e6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27038 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-21util/abuild: Fix building when not in coreboot root dirArthur Heymans
Change-Id: Ibe54096f275a05bda745ae2cc76c0109281c0c4b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-21soc/amd/stoneyridge/southbridge.c: Store PM related registers in cbmemRichard Spiegel
PM registers used for generating SWS values are being stored in a static variable within southbridge.c. In order to have it available for any source involved in building the platform, move the storage to cbmem, using id CBMEM_ID_POWER_STATE. Also add a variable that informs from which state the system is waking from, extracted from register ACPI_PM1_CNT_BLK. This variable will later be useful in detecting failed S3 resume. BUG=b:80119811 TEST=Add code to print SWS parameters and state it's waking from. Build and boot grunt, suspend and resume, check output for valid values. Remove the print code. Change-Id: Ib27a743b7e7f8c94918caf7ba5efd473f4054986 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27109 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 14:47:10 +0000