summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-01-14nb/intel/pineview: Select 1M TSEGArthur Heymans
With the only valid GTT setting being 1M, TSEG_BASE can only be aligned to TSEG_SIZE if it is also 1M. This alignment requirement comes from the desire to use SMRR to protect the SMM RAM. Tested on Foxconn D41S. Change-Id: Ibd879529923a1676f2e78500797a52d8a37b8eef Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30869 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-14cpu/intel/gen1/smmrelocate: Check for sanity on SMRRArthur Heymans
This happens when TSEG is found to be unaligned. Change-Id: Id0c078a880dddb55857af2bca233cf4dee91250a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30709 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14cpu/intel/car/non-evict: Update microcode in CAR setupArthur Heymans
On CPU's with a non eviction mode we cache the whole ROM to speed up finding the microcode updates, remove the caching to fill in the non eviction mode and then turn on caching the whole ROM again to speed executing XIP code in flash. Change-Id: Ib7f36678913e0ba8ef1305bca2c482f375b23eaf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30682 Reviewed-on: https://review.coreboot.org/c/30813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-14/src/mb/google/poppy/variants/atlas: Revise SPK resetGaggery Tsai
This patch revises the pad reset config of speaker reset GPIO pin from RSMRST to PLTRST. Audio engineer suggested to reset the amps with warm reset. BUG=b:122441567 BRANCH=None TEST=warm & cold reset & suspend_stress_test -c 10 and ensure the speakers are working well. Change-Id: I87c554b186b068da93e1662a97afaf01dddae0ef Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/c/30866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-14mb/intel/coffeelake_rvp: Update mainboard UART KconfigWonkyu Kim
Update mainboard UART Kconfig for Whiskylake RVP. TEST=Build and test on Whiskylake RVP. By default we can still get console from cbmem, and enable CONSOLE_SERIAL can get logs from UART port2. Select other Coffeelake RVPs and check CONSOLE_SERIAL is enabled. Change-Id: Ic56c019a12b467e5bede5648098d3fb82b56ba7e Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-on: https://review.coreboot.org/c/30861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-14nb/intel/pineview: Move the boilerplate mainboard_romstage_entryArthur Heymans
The mainboard_romstage_entry function is mostly boilerplate, so move it to a common location and provide mainboard specific callbacks. Change-Id: I33cf1d6a60d272f490f41205ec725dee8b00242b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-14nb/intel/{i945,pineview}: Remove unused functionArthur Heymans
Change-Id: I6ca83bde61f231b9f79c90af1d6c1cfa1a027768 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-14mb/google/octopus/variants: Configure PLT_RST_L pad IOSSTATE maskedJohn Zhao
PLT_RST_L was asserted twice at boot-up and a glitch was observed when coming out of suspend mode. Configure PLT_RST_L pad IOSSTATE from HIZCRx1 to be masked. BRANCH=octopus BUG=b:117302959 TEST=Verified no glitch on PLT_RST_L at S3 and PLT_RST_L stays high 3.3v during S0ix. Change-Id: I8c23aadda72be54fb45e67aab2bc8ed51e473bae Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30815 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14arch/x86: Enforce CPU stack alignmentKyösti Mälkki
When rmodule is loaded CPU stack alignment is only guaranteed to 4kiB. Implementation of cpu_info() requires that each CPU sees its stack aligned to CONFIG_STACK_SIZE. Add one spare CPU for the stack reserve, such that alignment can be enforced runtime. Change-Id: Ie04956c64df0dc7bb156002d3d4f2629f92b340e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/26302 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14mb/google/octopus/variants: Disable xHCI compliance modeJohn Zhao
Some usb devices exhibits signal loss which causes xHCI entering compliance mode. The resolution is to disable xHCI compliance mode. BRANCH=octopus BUG=b:115699781 TEST=Verified usb operation successfully. Change-Id: I41fecaa43f4b1588a0e4bbfc465d595feb54dd24 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30817 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14soc/intel/apollolake: Add option to disable xHCI Link Compliance ModeJohn Zhao
Provide options to disable xHCI Link Compliance Mode. Default is FALSE to not disable Compliance Mode. Set TRUE to disable Compliance Mode. BRANCH=octopus BUG=b:115699781 TEST=Verified booting to kernel. Change-Id: I2a486bc4c1a8578cfd7ac3d17103e889eaa25fe4 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30816 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14mb/google/hatch: Use USB2 Port 10 for BT over CnViAamir Bohra
Integrated BT controller in CnVi uses USB port 10 for communication. BUG=b:122552619 TEST=lsusb shows BT device Change-Id: Iad1ca0e9419b534f50a3ce3fdcbd660caf8efb5c Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30809 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14mb/lenovo/[xtz]60: Introduce and use RCBA64 macroPeter Lemenkov
Change-Id: I85ca631dfb01acb92dd1ac38dff07215114cab8c Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/30802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-14mb/lenovo/*/romstage: Use macros instead of magic numbersPeter Lemenkov
Apparently coreboot still uses magic numbers instead of macros in some Lenovo mainboards. Let's use macros instead. Note that IOTR[0123] is a 64-bit width variable. Change-Id: Icf185c77ede5a258fe37be9e772be6804d014b57 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/29208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-14sb/intel: Use common RCBA MACROsPeter Lemenkov
This commit follows up on commit 2e464cf3 with Change-Id I61fb3b01ff15ba2da2ee938addfa630c282c9870. Change-Id: Iaf06d347e2da5680816b17f49523ac1a687798ba Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/29236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: David Guckian Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-14soc/intel/fsp_broadwell_de: Move early_mainboard_romstage_entry()Patrick Rudolph
Move early_mainboard_romstage_entry before console_init. Allows to setup a SuperIO, if any, for serial console. Change-Id: I370263a6197a4c0c805352f07fedddbee1b8e247 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30828 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-14intel/fsp1_0: Add option to select FSP debug levelPatrick Rudolph
Useful for debugging FSP. Change-Id: I06e837cf1b051c55a531c3361e94fa1449bc8526 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
2019-01-14soc/intel/fsp_broadwell_de: Fix uartPatrick Rudolph
* Disable FSP serial output if not CONSOLE_SERIAL Tested on wedge100s. Change-Id: Idd825d2d6eb423452d3e81265860205980f6aa5b Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30706 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-14AGESA binaryPI: Consolidate ACPI for IMCKyösti Mälkki
Change-Id: Ieff6041f3c9ad02f9cebae0ec83d0898abb0d601 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/18538 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14AGESA binaryPI: Remove unused IMC ACPI methods IMSP and IMWKKyösti Mälkki
Note that IMC must sleep while SPI writes are in progress. Instead of using these ACPI methods, flashrom currently does raw IO to achieve the same. Change-Id: Ifca4e8328c54d1074b4799ddecfece24607214db Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/18537 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14binaryPI: Remove ACPI for IMC we don't runKyösti Mälkki
IMC is used on some of the AMD reference designs, so do not touch them yet. Change-Id: I6a58ab53d4a800d4c0c2026e50826122ece2c59f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/21190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-01-14AGESA: Remove ACPI for IMC we don't runKyösti Mälkki
IMC is used on some of the AMD reference designs, so do not touch them yet. Change-Id: Iae21e0294f0155f07fb4f4348ebc5b3120d50fd1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/18536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-01-14AGESA/PI: replace HUDSON_DISABLE_IMC with HUDSON_IMC_ENABLEMike Banon
Only a few boards are using IMC for the onboard fan control, so regarding the availability of IMC selection it should be opt-in, not opt-out. Also, select HUDSON_IMC_ENABLE for Gizmo 2 because Gizmo 2 could use IMC for the onboard fan control. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I3590b13c3b155405d61e373daf1bd82ca8e3bd16 Reviewed-on: https://review.coreboot.org/c/30756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-14drivers/spi/amic.c: Add the rest of >=1MB AMIC A25 chipsMike Banon
Required for ACPI S3 suspend support at some motherboards. Synchronizing with flashchips.c/h flashrom source code. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: Ic5bd3e43e0d3fd5f454fae71b307c0682f203d5c Reviewed-on: https://review.coreboot.org/c/30884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-14drivers/spi/adesto.c: Add the rest of >=1MB Adesto AT25 chipsMike Banon
Required for ACPI S3 suspend support at some motherboards. Synchronizing with flashchips.c/h flashrom source code. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I8c0e6d8f1487ca90f88d4a56af3fb0e21458ef1e Reviewed-on: https://review.coreboot.org/c/30883 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14drivers/spi/gigadevice.c: Add the rest of >=1MB Gigadevice GD25 chipsMike Banon
Required for ACPI S3 suspend support at some motherboards. Synchronizing with flashchips.c/h flashrom source code. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I333c8589ddc2bece488608ff66015ca8307eae0f Reviewed-on: https://review.coreboot.org/c/30882 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-14drivers/spi/macronix.c: Add the rest of >=1MB Macronix MX25 chipsMike Banon
Required for ACPI S3 suspend support at some motherboards. Synchronizing with flashchips.c/h flashrom source code. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I4508a65a5bdcbf58aadf452de5e896fc3c5b1bc3 Reviewed-on: https://review.coreboot.org/c/30877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-14drivers/spi/spansion.c: Add more Spansion S25FL_K chipsMike Banon
Add S25FL208K (ID 0x4014), S25FL132K (ID 0x4016) and S25FL164K (ID 0x4017) chips in a way similar to S25FL116K (ID 0x4015) chip from the same family. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I9bf7197bbc0d12797c8ed100c673628de9c140f7 Reviewed-on: https://review.coreboot.org/c/30874 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-13google/butterfly: correct northbridge selectionMatt DeVillier
butterfly is a Sandybridge device, and selecting Ivybridge breaks libgfxinit currently due to CPU mismatch Test: build/boot butterfly w/libgfxinit Change-Id: I1a7f5a3681d21a256834b11b545855c4365f5f78 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30820 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-13google/butterfly: add cpu/gpu pwm backlight register valuesMatt DeVillier
Required for functional internal display on butterfly using libgfxinit. Test: boot/build butterfly, verify internal display functional prior to OS driver loading. Change-Id: Ib8060f2d1ad0694f0886d35c83763907f61b47b1 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30819 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-13{mb,nb,soc/fsp_baytrail}: Get rid of dump_mem()Elyes HAOUAS
Use hexdump() instead of dump_mem(). Change-Id: I7f6431bb2903a0d06f8ed0ada93aa3231a58eb6f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Guckian Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-13nb/intel/x4x: Remove spurious pcidev_on_root() usageNico Huber
It's supposed to be the same device that is passed to the executing function. Change-Id: I6cf994390c16e0393c96a2b2e04a36305be88e68 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/30880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-13nb/intel/i945: Reduce pcidev_on_root() callsNico Huber
Also removes one call for 0:2.0 (integrated graphics) that might be disabled. Change-Id: I494aa366030b77baf431f29ba331f13f7c567025 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/30881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-13sb/intel: Check for NULL-return of pcidev_on_root()Nico Huber
In these cases we have to expect a NULL pointer because the IGD device 0:2.0 may be disabled. The behaviour still differs from using dev_find_slot(), which may return a disabled device. Though, if you'd try to read its config space you'd only read garbage (0xff) and in cases where we filled ACPI data with devicetree information, the information shouldn't be interpreted by the OS because of the disabled device. Change-Id: I1bab8fa3a82daca71d03453315cdd69d8951fc24 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/30879 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-13usbdebug: Remove option DEBUG_USBDEBUGKyösti Mälkki
Superseeded with DEBUG_CONSOLE_INIT. For dbgp_print_data() return early and skip reading registers when dprintk() would not get printed anyways. Change-Id: Idf470b8572ad992c8d4684a860412d9140f514ca Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-13console: Add Kconfig debug option DEBUG_CONSOLE_INITKyösti Mälkki
Under normal circumstances no printk() goes through until console_hw_init() has completed. This is wanted behaviour, except when you need to debug the setup of one of consoles. Change-Id: Ifc2bb22bf930009ee229d4461f512ada3018307b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30558 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-13mb/google/kukui: add flapjack on top of kukuiYH Lin
Add placeholder for future flapjack additions/modifications. BUG=None BRANCH=kukui TEST=build with kukui/flapjack configurations Signed-off-by: YH Lin <yueherngl@google.com> Change-Id: Ib9cd39e284f19b9179da73ed9f2b13d97442960e Reviewed-on: https://review.coreboot.org/c/30859 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-13aopen/dxplplusu: Switch to C_ENVIRONMENT_BOOTBLOCKKyösti Mälkki
This board is the only user of these ancient chipsets, so we'll do all in one go. Also wipe out some extra headers. Change-Id: I22c172d577e6072562d8fcfa58145ec62473823e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-13arch/x86: Drop Kconfig AP_SIPI_VECTORKyösti Mälkki
This was used to check romcc-built bootblock and romstage agree about the location of 16-bit entrypoint. There was no need to customize it as bootblock size requirement did not grow. Just check for a fixed location at 4 GiB - 4 KiB. With C_ENVIRONMENT_BOOTBLOCK we can have a proper symbol for the purpose, since it appears in the same compilation unit. It will adjust if C_ENV_BOOTBLOCK_SIZE changes. Change-Id: I93f3c37e78ba587455c804de8c57e7e06832a81f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-13cpu/intel/car/p4: Update microcode in CAR setupArthur Heymans
This updates the BSP microcode during CAR setup. Change-Id: I87d34cf38dbd700ecb04d87c5b4767910e4a922c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30682 Reviewed-on: https://review.coreboot.org/c/30777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-12soc/intel/cannonlake: Hook up MicrocodeLijian Zhao
Hook Coffeelake U43e and Coffeelake H/S/E3 microcode into SOC and remove the MICROCODE_BLOB_NOT_HOOKED_UP. BUG=N/A TEST=Boot up with coffeelake rvp board and check microcode revision in coreboot log. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I6593081374dd4898a82db5b43c3b5bf154b3ef60 Reviewed-on: https://review.coreboot.org/c/30864 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-11src/drivers/intel/wifi: Add a W/A for Intel ThP2 9260Gaggery Tsai
This patch adds a workaround for ThP2. The PCIe root port LCTL2.TLS is by default GEN1 and ThP has bad synchronization on polarity inversion. When the root port request for speed change, ThP doesn’t confirm the request, and both sides are moving to polling after timeout, hot reset is issued, and then most of the CFG space is initialized. From the observation, CCC/ECPM/LTR would be reset to default but CCC/ECPM of root port and end devices have been reconfigured in pci_scan. The LTR configuration for root port is still missing. BUG=B:117618636 BRANCH=None TEST=Warm/cold reset for 10 times and didn't see unsupported request related AER error messages & $lspci -vvs 00:1c.0|grep LTR and ensure LTR+ is presenti & $iotools pci_read32 0 0x1c 0 0x68 and ensure bit10 is set. Change-Id: Id5d2814488fbc9db927edb2ead972b73ebc336ce Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/c/30486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-11soc/mainboard: Update mainboard UART KconfigLijian Zhao
After f5ca922 (Untangle CBFS microcode updates) got merged, all mainboard using intel apollolake, cannonlake, coffeelake, glk, kabylake, skylake, icelake and whiskeylake get affected. Using INTEL_LPSS_UART_FOR_CONSOLE instead of UART_DEBUG and set default console for each platform. BUG=N/A TEST=Build and test on Sarien platform, by default we can still get console from cbmem, and enable CONSOLE_SERIAL can get logs from UART port 2. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I550a00144cff21420537bb161c64e7a132c5d2de Reviewed-on: https://review.coreboot.org/c/30853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-11siemens/mc_apl1: Use INTEL_LPSS_UART_FOR_CONSOLEMario Scheithauer
With the commit a96e66a (soc/intel: Clean mess around UART_DEBUG), an adjustment is necessary for this mainboard. Change-Id: I0fb6288959f8bcb45c4cc93cc132f31a5ab2a5ad Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/30836 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-11util/crossgcc: derive date and version from latest commitPatrick Georgi
This way date and version are automatically updated when util/crossgcc was changed, the version contains the commit ID and we have less churn on these variables. Change-Id: I475ba9578a8bb421d7c342d2569d7de7fcf4161d Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/30804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-01-11Revert "cpu/amd: Use `get_option()`"Paul Menzel
This reverts commit 6fffd70435084fb1d3237fcb1a11f11849721e8f. Doing more tests on the Asus KGPE-D16, it seems to cause a reboot loop quite often. Therefore, revert the commit. The problem might be caused by the spinlocks used by `get_option()`, and which are not used by `read_option()`. Change-Id: Ic25129aa71c8e8e40a65bb2658de78005766fea8 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/30830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-11console/Kconfig: Fix dependency of FIXED_UART_FOR_CONSOLENico Huber
The Kconfig declaration for FIXED_UART_FOR_CONSOLE was accidentally placed inside an `if CONSOLE_SERIAL` in a96e66a (soc/intel: Clean mess around UART_DEBUG). TEST=Start a clean config, select intel/leafhill and disable serial console. Confirm that config can be saved without error. Change-Id: Ie41687e91af11a13697cbe25938dada2c74b40fb Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/30829 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-11arch/x86/ebda: Don't trash the EBDA on the resume pathArthur Heymans
Clearing the EBDA was introduced with b4aaaa "Prepare the BIOS data areas before device init." which states that the purpose of setting up these area's is just to make sure they are sane. On the S3 path doing this is not needed and can even thrash data set up by payloads (mostly SeaBIOS) that used that memory. Change-Id: I9c54156bd8247e8a34dec6edc27cfc2d33cde595 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-11cpu/intel/microcode: Support update before CAR entryArthur Heymans
Change-Id: Ie3c2d2e1bc79dcaffd9901e17f83ceeaabd1d659 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-11arch/x86/lapic: Remove second stack poisoningKyösti Mälkki
It was already done once in c_start.S. Change-Id: I1cb0ea25251644dbd1127d177247a02ba52bb550 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-01-10mainboard/google/octopus: configure EC_AP_INT_ODLJett Rink
Enable the EC_AP_INT_ODL interrupt on GPIO_134 for all octopus boards that support it. Also removing unnecessary IO standby support since we don't use this pin to wake up the SoC. BRANCH=octopus BUG=b:122552125,b:120679547 TEST=CTS tests with changes Change-Id: I018864ae5fa400372b5b443e49828e8202b9aa4d Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://review.coreboot.org/c/30788 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-10soc/intel/fsp_broadwell_de: Drop MICROCODE_BLOB_NOT_HOOKED_UPNico Huber
It's been hooked up in the meantime. Change-Id: I64176b09e375034189000ea4308c58771f0019a1 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/30812 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-10northbridge/amdfam10: Deal with PCI_ADDR() betterKyösti Mälkki
PCI_ADDR() is tightly coupled with different setup_resource_map() variants so move the declaration away from global namespace. In the implementation of setup_resource_map() use the bottom 12 bits as the register mask like the other variants do already. Change-Id: Iadedfe993621a4458ce8f12c5e98c8cee537d2db Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30784 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-10amdfam10 boards: Simplify early resourcemapKyösti Mälkki
Purpose of the table is to load initial address maps on PCI function 0:18.1. Provide a macro of its own so it is clear no other PCI devfn is accessed here. Change-Id: Ic146207580a5625c4f6799693157b02422bef00a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30783 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-10sb/nvidia/mcp55: Avoid confusion with PCI_ADDR()Kyösti Mälkki
What you see in the table are not the PCI devices that will be written to. Use a helper MCP55_DEV() to make you look twice what is actually done. Change-Id: I1349af9f734aaabb576d1370ae29a56c91569a7c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-10sb/nvidia/ck804: Avoid confusion with PCI_ADDR()Kyösti Mälkki
What you see in the table are not the PCI devices that will be written to. Use a helper CK804_DEV() to make you look twice what is actually done. Change-Id: I0ee244dacd6bbd0a88a5e6a5c634f381b0cf713d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-10amdfam10 boards: Drop extern on apicid_sp5100Kyösti Mälkki
The value get_bus_conf() initialises this value to is discarded. Change-Id: I8382861574e6f8ab52839169502a5af7c3742daa Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-10soc/intel/cannonlake: complete rename of TCO2_STS_SECOND_TOPatrick Georgi
TCO2_STS_SECOND_TO was renamed to TCO_STS_SECOND_TO but one use slipped through. Change-Id: I9e3b1cc5cb2f319db35416edf6cea612d755d40a Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/30805 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-10crossgcc: Update acpica to version 20190108Elyes HAOUAS
changes in this version: https://acpica.org/node/164 Change-Id: Iff7fb6990f69f658c41ec115a3383ec902d8300f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-10device/pci_device: Do not break tree topologyKyösti Mälkki
Fix regression introduced with commit ad7674e device: Introduce pcidev_on_root() and friends Function pci_scan_bus() breaks bus->children link in the devicetree topology while scanning a bus. While the scan is in progress, accessing PCI devices with number higher than what is being probed was not possible because new pcidev_on_root() relies on having proper topology present at any time. Change-Id: I7bb497f7390628dd2f0310b380f199783a888c4c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2019-01-10sb/intel/common: Show "Add EC firmware" only for boards that need itJan Tatje
Most boards currently do not use EC firmware from SPI flash in the IFD, this hides this option by default and shows it only for boards that need it. A new config variable MAINBOARD_USES_IFD_EC_REGION is introduced to enable this option for boards that need it. The following list of boards requiring this was provided by Lijian Zhao: 1. intel/cannonlake_rvp 2. intel/coffeelake_rvp 3. intel/icelake_rvp 4. google/sarien 5. google/hatch Change-Id: I52ab977319d99a23a5e982cc01479fe801e172a7 Signed-off-by: Jan Tatje <jan@jnt.io> Reviewed-on: https://review.coreboot.org/c/30697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-10soc/intel/common/block: Move tco common functions into block/smbusSubrata Banik
This patch cleans soc/intel/{apl/cnl/icl/skl} by moving common soc code into common/block/smbus. BUG=b:78109109 BRANCH=NONE TEST=Build and boot KBL/CNL/APL/ICL platform. Change-Id: I34b33922cafee9f31702587e0f9c03b64f0781b8 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/26166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-10google/kukui: Correct boardid sources and add sku_idHung-Te Lin
Kukui is going to use ADC#4 as SKU ID, and utilizing EC BoardID as global board_id (i.e., board revision). BUG=b:122060615 TEST=make; manually tested on Kukui P1 board. Change-Id: I7bba368c141a7ba6db11f24b8e8e7158f0fc729e Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/30617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-10google/kukui: Complete board ID ADC valuesHung-Te Lin
The ID from ADC on Kukui supports 16 different values and we should list all voltage values ahead. BUG=b:80501386 TEST=make; manually verified on Kukui P1 Change-Id: Ic3abe07abfe818ca68e180c262fd431d1167b801 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/30619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-10google/kukui: Correct boardid init valuesHung-Te Lin
From `boardid.h`, the uninitialized ID values should be BOARD_ID_INIT instead of BOARD_ID_UNKNOWN. BUG=b:80501386 TEST=make; manually verified on Kukui P1 Change-Id: Ie5267e575e38b92ec64a7317defbd00ee153fa0a Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/30618 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-10mb/foxconn/g41s-k: Add g41m variantArthur Heymans
Was tested with the following: - 2 DIMM slots - USB - Ethernet NIC - automatic fan control - Libgfxinit with VGA, DVI (HDMI slot unpopulated) - PS2 Keyboard - SATA - PEG - S3 resume What does not work: - Using the second DIMM slot on a channel G41 can only handle 2 ranks per channel and on this mainboard 1 rank per DIMM slot. Supporting this would require too much raminit rework and is not worth it (at least for me) Change-Id: I67784038ef929f561b82365f00db70a69c024321 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-10mb/google/sarien: Add PDR and RW_LEGACY_NVRAM to FMAPDuncan Laurie
1) Add a Platform Data Region called SI_PDR which is allocated in the flash descriptor for this platform 2) Add a DIAG_NVRAM region for use by the diagnostic payload for non-volatile storage. 3) Encapsulate both RW_LEGACY and DIAG_NVRAM in a region called RW_DIAG so it is clear they are associated. 4) Move the RW_DIAG region to the start of the RW region so that once we can re-enable a larger BIOS region this sub-region will be in the uncached area since it is not accessed on a normal boot. BUG=b:119435206 TEST=tested on Arcada board to ensure expected regions are present Change-Id: Ieb8bc4cf70d0a931e4944210112cfaf5c543f9f3 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-10drivers/intel/fsp1_1: Add stack guardsArthur Heymans
This allows to check if stack overflows the car globals. Change-Id: I369b2d846f35914facb3e69cc762f7e555271bec Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-01-10driver/spi/eon.c: Add the rest of >=1MB EON EN25 chipsMike Banon
Required for ACPI S3 suspend support at some motherboards, e.g. EN25QH32 chip entry for AMD Lenovo G505S laptop. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I8343a1741be5ea294de0773962c021428815934c Reviewed-on: https://review.coreboot.org/c/30744 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-10soc/intel/fsp_broadwell_de/vtd: Silence warningPatrick Rudolph
Silence PCI resource warning due to missing set_resources. Change-Id: I8253e9ca137bda1cdd1c06273679693c4b7803ec Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-10arch/x86: Remove weak tsc_freq_mhz() implementationKyösti Mälkki
Build with TSC_CONSTANT_RATE must fail when this function is not implemented for the platform. Weak implementation causes division by zero in timer_monotonic_get() and turns udelay() into no delay. Change-Id: Id3b105ea3aac37cd0cba18ce2fb06d87a055486f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30762 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-01-10soc/intel/denverton_ns: Fix missing tsc_freq_mhz()Kyösti Mälkki
It was relying on bad weak implementation for postcar and verstage. Change-Id: I5a520e0166198c0565349c164f143f4a43649861 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30763 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: David Guckian Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Vanny E <vanessa.f.eusebio@intel.com>
2019-01-10mb: Move timestamp_add_now to northbridge x4xElyes HAOUAS
Change-Id: Iacbee658a4049e1c13a120dbc21425ffb6a1cabb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-103rdparty/blobs: Update for current Intel microcodeNico Huber
The microcode included for `model_6xx` was for a 660, that path has changed. Change-Id: I09a41a8269cfdf8953bac10c9630922192851e73 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/30081 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-10Untangle CBFS microcode updatesNico Huber
The option to specify a binary file name was added later for platforms that do not provide microcode updates in our blobs repository. Alas, it wasn't visible what platforms these are. And if you specified a file for a platform that already had one, they were all included together. Make it visible which platforms don't provide binaries with the new con- figs MICROCODE_BLOB_NOT_IN_BLOB_REPO, MICROCODE_BLOB_NOT_HOOKED_UP and MICROCODE_BLOB_UNDISCLOSED. Based on that we can decide if we want to include binaries by default or explicitly show that no files are inclu- ded (default to CPU_MICROCODE_CBFS_NONE). Also split CPU_MICROCODE_CBFS_GENERATE into the more explicit CPU_MICROCODE_CBFS_DEFAULT_BINS and CPU_MICROCODE_CBFS_EXTERNAL_BINS. And clean up the visibility of options: Don't show CBFS related options on platforms that don't support it and don't show external file options if the platform uses special rules for multiple files (CPU_MICROCODE_ MULTIPLE_FILES). Change-Id: Ib403402e240d3531640a62ce93b7a93b4ef6ca5e Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29934 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-10mb/google/hatch: enable CPU cluster deviceAamir Bohra
Change-Id: I28c67fbdf2b4f371c4b533b64cad2c4376ca2bd2 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30785 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-10aopen/dxplplusu: Move timestamps to common codeKyösti Mälkki
First initialisation is already in cpu/intel/car/romstage.c. Change-Id: If3e5068b4a9981354f0fca5fc12b6b81de1c8f4b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-10mb: Move timestamp_add_now to northbridge/amd/amdfam10Elyes HAOUAS
Also remove some commented code. Change-Id: If2e91ad871b14b305e2181194d77b100e72f5763 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-10sb/amd/{cimx,sb{7,8}00}: Use PCI_DEVFN()Elyes HAOUAS
Change-Id: I731fd4ecfab679cd3d830a89bc82c56cf9008bc4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30786 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-10binaryPI: Drop warning on EXT_CONF_SUPPORTKyösti Mälkki
Copy-paste from fam15 code. Change-Id: Ic52031c57a8b659bff5ca03a66ec2291140d2233 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30730 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-10mainboard/amd: Drop incorrect Kconfig selectKyösti Mälkki
Copy-paste from fam15. Change-Id: I87af312870063aaa498bbfc2f059f69dcdab0094 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30729 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-10southbridge/amd/cimx: Drop unused functionsKyösti Mälkki
Leftovers from attempts of using these with native (non-AGESA) amdfam10/15 support code. Change-Id: I8eaed338438e1de5baee462376e339e1439f72f1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30728 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-09soc/intel: Clean mess around UART_DEBUGNico Huber
Everything is wrong here, the Kconfig symbols are only the tip of the iceberg. Based on Kconfig prompts the SoC code performed pad configu- rations! I don't see why the person who configures coreboot should have the board schematics at hand. As a mitigation, we remove the prompts for UART_DEBUG, which is renamed to INTEL_LPSS_UART_FOR_CONSOLE (because the former didn't really say what it's about), and for UART_FOR_CONSOLE in case the former is selec- ted. Change-Id: Ibe2ed3cab0bb04bb23989c22da45299f088c758b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-09Veyron: fix sdram config for Hynix H9CCNNNBKTMLBR-NTDLoop_Wu
Sdram config sdram-lpddr3-hynix-4GB.inc for H9CCNNNBKTMLBR-NTD can't boot on Mickey. It's confirmed that the right config for Hynix H9CCNNNBKTMLBR-NTD is sdram-lpddr3-hynix-2GB-BK.inc. BUG=b:122239609 BRANCH=master TEST=boot on mickey Change-Id: Ifeaadda50d939e0c118cb7fe3964dcd08b709c2a Signed-off-by: Loop_Wu <Loop_Wu@asus.com> Reviewed-on: https://review.coreboot.org/c/30761 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-09amdfam10 boards: Use smp_write_pci_intsrc()Kyösti Mälkki
Radically reduces line lengths and splits '(bus<<2) | INT' to separate parameters. Change-Id: I6c924a70d00a9139719f8078bbf1e4d04b576324 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30739 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-09mainboard/h8scm_fam10: Use apicid_sr5650Kyösti Mälkki
Do this for consistency and to ease further bulk-sed work on those lines. Change-Id: Ic9706de4278d163d1ba0c0706ec5d4c6c87ffa45 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30738 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-09amdfam10 boards: Use PCI_DEVFN()Kyösti Mälkki
Change-Id: I7b9aeaaa1cfa20efc9d187d91ece4eb9ee659c3f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30737 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-09southbridge/nvidia/ck804: Drop leftover codeKyösti Mälkki
Code was for romcc romstage. Change-Id: If368610651ce950169ef71d9ed768a509c2a5c5c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30736 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-09mb/intel/kblrvp: Add helper function to get Board IdPraveen hodagatta pranesh
Add 2 helper function get_board_id() & get_spd_index() to read board id & spd index from EC. Rename the old get_board_id() function to get_ec_boardinfo(). BUG=None TEST= Tested on KBL RVP11, able to read the Board id (0x44) and verified in serial logs. not verified on KBL RVP8. Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Change-Id: Ie20bf0d45a3568c2c433e5b844bea86aac07c47d Reviewed-on: https://review.coreboot.org/c/30306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-09mb/intel/kblrvp: Enable overridetree support for variantsPraveen hodagatta pranesh
This patch add devicetree.cb in baseboard and overridetree.cb for RVP3, RVP7 and RVP8 variants. BUG= None TEST= build with BUILD_TIMELESS=1, static.c remains same on before & after enabling overridetree. Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Change-Id: Ib7d492e2a92aed10ad0426d57640d0ed56733847 Reviewed-on: https://review.coreboot.org/c/30623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-09MAINTAINERS: Tag denverton-ns as Odd FixesNico Huber
And remove some maintainers that aren't even registered to Gerrit. Change-Id: I3a753b60eab6d7939c37181760bcfb4bc6e75f65 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29472 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Guckian Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-09agesawrapper.c: check if HOP_COUNT_TABLE exists before AmdInitLate()Krystian Hebel
If HOP_COUNT_TABLE doesn't exist AmdInitLate() returns error when creating CDIT, which scaries users. This patch turns off CDIT generation. After this patch AGESA_UNSUPPORTED is returned due to a bug in AGESA which cannot be walked around without disabling DMI table generation (`AGESA_STATUS Status = TRUE`, present in open source version of AGESA too). Change-Id: I868aa840ad3495a66a9d70b7803af237e7d5f049 Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/30475 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-09cpu/amd: Use `get_option()`Paul Menzel
Fix warnings on the console. coreboot-4.9-214-g0dd2014390 Mon Jan 7 15:17:13 UTC 2019 romstage starting... NOTICE: read_option() used to access CMOS from non-ROMCC code, please use get_option() instead. NOTICE: read_option() used to access CMOS from non-ROMCC code, please use get_option() instead. NOTICE: read_option() used to access CMOS from non-ROMCC code, please use get_option() instead. Change-Id: I8501ff256676cd0ec4b59b28f4f1e0f2a9f74cac Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/30715 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-09cpu/intel: Use the common code to initialize the romstage timestampsArthur Heymans
The initial timestamps are now pushed on the stack when entering the romstage C code. Tested on Asus P5QC. Change-Id: I88e972caafff5c53d8e68e85415f920c7341b92d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-09Doc/mb/asrock/h81m-hds: Link to the Haswell documentationTristan Corrick
Change-Id: I50da6da6c1321f8d9d94b11d19187a8c22709705 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/30690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-09Doc/mb/supermicro/x10slm-f: Remove PCIe issue that has been fixedTristan Corrick
The issue in question was resolved with commit 334be3289d6c ("nb/intel/haswell: Add support for PEG"). Also add a link to the known issues for Haswell, which has some information on PCIe. Change-Id: Icc3061b60893394e3d537d3b86f4ac748cec2eb4 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/30689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-09mb/google/hatch: Disable the SA IPU for hatchV Sowmya
This patch disables the SA IPU for hatch since it is not using the IPU. Change-Id: Ib2afc4cc4fd7ef98365b0b98130b0e8bc757ac2a Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/30699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-01-09soc/intel/cannonlake: Enable/Disable IPU based on devicetree switchV Sowmya
This patch provides an option to enable or disable IPU (image processing unit), * Add an entry for SA IPU in the pci_devs.h. * Enable/Disable the IPU based on devicetree entry. Change-Id: Ia155bc242dd33e816d056bbea1e3d4c1cbbe23da Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/30698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-09google/kukui: Enable VBOOT_VBNV_FLASH to store VBNV in flashTristan Shieh
Reading nvdata from non-volatile flash storage. With this patch, it will pass the firmware test that corrupts FW_MAIN_A and boots up with FW_MAIN_B. BUG=b:80501386 BRANCH=none Test=test_that --board=kukui 172.23.213.147 firmware_CorruptFwSigA Change-Id: I9ef6bff019ee986ff018202bfd4d4a875526ec6c Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/30701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-01-09soc/cavium: Remove white spaces before tabsElyes HAOUAS
Change-Id: I8213835ac18a31f1c10d80ba07b50d33f8abcbd9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 17:15:53 +0000