summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-11-28mb/hp/compaq_8200_elite_sff: Fix SATA port mapPatrick Rudolph
Assign correct SATA port map. Tested on HP8200: All SATA ports are now usable in GNU/Linux. Change-Id: I5be2b4f33882f6f71213f8173cdb945fc9b7af06 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/29855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-11-28security/vboot: Add VB2_LIB to romstage sources without dependenciesWerner Zeh
The coming feature "measured boot" relies on VB2_LIB in romstage. In the case where there is no separate verstage, compile the library just for romstage as it will then be shared across verstage and romstage code. If there is a separate verstage, compile the library separately for verstage and romstage. Change-Id: I8126c21b8fbe8dd65d95af49cbe2ad776b8ef605 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/29827 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-28soc/intel/{baytrail,broadwell}: Correct Chromeos RAM reservationFrans Hendriks
RAM is reserved for Chromeos even when Chrome is not used. Use CONFIG_CHROMEOS to determine is RAM must be reserved. BUG=N/A TEST=Intel BayTrail CRB Change-Id: Ic1f5089227f802e2b2f62dc02fa0d1648c1855b5 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-11-28soc/intel/icelake: Fix IO decode setupSubrata Banik
Make pch_early_iorange_init() function similar to soc/intel/cannonlake/bootblock/pch.c while fixing below issue: * COM1 not being enabled properly. TEST=Able to get serial output from an 8250IO UART device at the standard 0x3f8 base address. Change-Id: I5ab02f46d27e667be3d9328d94b634ef04038d2f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/29835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2018-11-28src/soc/intel/braswell/include/soc/irq.h: Change PIRQ_PIC_IRQDISABLE valueFrans Hendriks
Using 0 for PIRQ_PIC_IRQDISABLE might conflict with using IRQ0 as PIRQ. Change PIRQ_PIC_IRQDISABLE value to 0x80, so value 0 is reserved for IRQ0. BUG=N/A TEST=Intel CherryHill CRB Change-Id: I18706f12e7c2293e948eb10818393f0d1870f514 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29393 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-28src/soc/intel/braswell/include/soc/iomap.h: Correct IO_BASE_SIZE and ↵Frans Hendriks
ILB_BASE_SIZE The sizes of IO_BASE and ILB_BASE areas a incorrect. Correct IO_BASE_SIZE and ILB_BASE_SIZE values. BUG=N/A TEST=Intel CherryHill CRB Change-Id: I23c3fd608598c5ec2271d393168ac4bf406772b4 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-28vendorcode/cavium: Supply bdk_pop and bdk_dpop definitionsMartin Roth
This is an issue found by the new builder image and needs to be fixed before we can upgrade to the new toolchain version: In function `bdk_dram_get_size_mbytes': src/vendorcode/cavium/bdk/libbdk-dram/bdk-dram-size.c:198: undefined reference to `bdk_pop' In function `bdk_get_num_cores': /src/vendorcode/cavium/include/bdk/libbdk-hal/bdk-utils.h:164: undefined reference to `bdk_dpop' In function `init_octeon3_ddr3_interface': src/vendorcode/cavium/bdk/libdram/dram-init-ddr3.c:7550: undefined reference to `bdk_pop' Change-Id: Ibf71e4556014795bfedceccfe3837dc9deb29ad2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/29851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-11-28romcc: Increase buffer size to fit max string sizeMartin Roth
On the updated builder image, the build is failing because the system compiler has been updated to GCC 8.2.0. It complains about the possibility of overflow when putting one 30 character buffer plus 2 characters into another 30 character buffer. To fix this, increase the recipient buffer size by 2. romcc.c:3645:2: note: 'sprintf' output between 3 and 32 bytes into a destination of size 30 [-Werror=format-overflow=] sprintf(buf, "\"%s\"", scratch); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ romcc.c:3649:2: note: 'sprintf' output between 3 and 32 bytes into a destination of size 30 [-Werror=format-overflow=] sprintf(buf, "\"%s\"", scratch); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Change-Id: I7879a7202cc3ff52301b10118fc49fcc601f133e Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/29850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-11-28soc/intel/braswell/northcluster.c: Reserve local APIC resourcesFrans Hendriks
The resources of the local APIC are not reserved. Use mmio_resource() to add local APIC resources. BUG=N/A TEST=Intel CherryHill CRB Change-Id: Ieb9de45098d507d59f1974eddb7a94cb18ef7903 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-11-28src/soc/intel/braswell/acpi/lpc.asl: Add ACPI and GPIO basesFrans Hendriks
ACPI and GPIO base are used by LPC controller, but not reserved. Both bases are added to the LPC device resources. BUG=N/A TEST=Intel CherryHill CRB Change-Id: I5248694b497c4965d79dd7c25ec97592dc0dddbc Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-11-28sb/intel/common: Fix style issue in spi.cElyes HAOUAS
Change-Id: I6b9e0e0c643f9b47cfe8bdfffbe247f477ace685 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-27mb/google/octopus/var/phaser: Deprecate board id 0Furquan Shaikh
This change gets rid of bid0_override_table as part of clean up effort to deprecate bid0. Additionally, it updates the touchscreen enable GPIO in overridetree and gets rid of code in variant.c to update enable gpio at runtime. BUG=b:119885949 Change-Id: I527973747e7d81ec47997da57eeb15f38d3ac2fd Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/29787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2018-11-27cbmem: Fix remaining mapped memory accesses to use aligned_memcpy()Julius Werner
aligned_memcpy() was introduced to fix issues with platforms that don't allow unaligned accesses to areas mapped with /dev/mem, but we missed a few spots. Fix them. Change-Id: I97ea953455b41a50023ceaca7eb148d60e6b8097 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/29848 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-11-27mainboard/google/reef: Bump mainboard mem versionKane Chen
This change is to bump fsp_memory_mainboard_version in order to trigger MRC full training BUG=b:119481870 CQ-DEPEND=CL:*716558 BRANCH=reef, coral TEST=make sure MRC retraining is triggered and the MRC cache is updated to newer version. Change-Id: I92463045f7a808fb25aaa7a2d5f6fcde36dfb458 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/29647 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-27MAINTAINERS: Update 9eSec maintainersPhilipp Deppenwiese
Update 9elements Cyber Security maintainers. Change-Id: Ib683cb1b6a338667b065a71b05bdd3a4294e0296 Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/c/29820 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-27mb/intel/icelake_rvp: Enable HDA audio supportAamir Bohra
This patch enables HDA audio support on icelake rvp. Add ALC700 codec verb table and selects SOC_INTEL_COMMON_BLOCK_HDA_VERB config to detect and initialize codec configuration as specified in verb table. BUG=none TEST=verify codec is listed and audio playback is working Change-Id: Ibdf707f9002a09870ebe879c9db462084ecb01ea Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/29838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-11-27mb/intel/icelake_rvp: Add EC acpi support codeAamir Bohra
This implementation adds below changes: 1. Add chrome ec asl support for iclrvp. 2. EC SCI, SMI, S3/S5 wake events. 3. Wake pin and EC SMI GPE confiiguration. Change-Id: Ie95da92f7125e56fe9ef9d57a1098278c308918e Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/29797 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-27mb/intel/icelake_rvp: Include cpu.asl in DSDT ACPI tableAamir Bohra
This implementation adds support of PNOT method included in cpu.asl. It is needed to notify CPU APCI device to re-evaluate the _CST table for list of supported C-states. Change-Id: I135cc3aa32a912c8ad3449d063d533f8873fcc94 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/29861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-11-27sb/intel/i82801gx: Use common Intel SMM codeArthur Heymans
Use the common Intel code to set up smm and the smihandler. This is expected to break S3 resume and other smihandler related functionality as this code is meant to be used with CONFIG_SMM_TSEG. Platforms (i945, pineview, x4x) using this southbridge will adapt the CONFIG_SMM_TSEG codepath in subsequent patches. Tested on Intel D945GCLF, still boots fine but breaks S3 resume support because it hangs on SMI. Change-Id: If7016a3b98fc5f14c287ce800325084f9dc602a0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-27soc/intel/cannonlake: Delete unused macros in lpc.hSubrata Banik
TEST=Able to build and boot successfully. Change-Id: If013d8e59046152e9f1a026f48bd9cd9b43ab6af Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/29836 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-27mb/google/dragonegg: Enable audioSubrata Banik
BUG=b:116191230 BRANCH=None TEST=1. verified boot beep support at depthcharge. Change-Id: Ia4843185dd79a35476c4f0fc0666ebaf3773db4c Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/29753 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-27mb/google/dragonegg: Enable trackpadSubrata Banik
BUG=b:112282079 BRANCH=None TEST=1. run evtest and make sure trackpad shows up in list 2. Able to wake system from S3 using trackpad Change-Id: I86d6b7815147d558065611604363bb607119c154 Signed-off-by: Shelley Chen <shchen@google.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/29752 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-27mb/google/dragonegg: Enable ps2 keyboardShelley Chen
BUG=b:112332115 BRANCH=None TEST=ensure at bootup that /sys/devices/pnp0/00:05 exists and driver link to '../../../bus/pnp/drivers/i8042 kbd' Also, can now see keyboard in evtest. Change-Id: I2a6b382be84bc5201beafe21ff8ddee3738bc5c2 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/29750 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-27mb/google/dragonegg: Add initial mainboard code supportAamir Bohra
This patch includes support for both ICL ES0 and ES1 samples. Detailed document is here: Documentation/soc/intel/icelake/iceLake_coreboot_development.md TEST=Able to build and boot dragonegg. Change-Id: I2cc269cb0050bf5b031f48cfe114485c55ab8fa9 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/29749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-27Documentation/../../dragonegg: Add dragonegg coreboot development documentationSubrata Banik
Change-Id: Ia15e317557a0893d9f80cc9e87c6b90c85b93dcf Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/29829 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-27Documentation/../../icelake_rvp: Add RVP coreboot development documentationSubrata Banik
Change-Id: If063cbd3436d9ee107945f425a31ba0009039a1d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/29828 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-27Documentation/../../icelake: Add Ice Lake coreboot development documentationSubrata Banik
Add documentation for Ice Lake processor family coreboot development. Documented so far: * What is Ice Lake * Development Strategy * Create coreboot Image * Flashing coreboot Change-Id: Ief4df6ca11f95b75ecddeb560f7887bfadced086 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/29805 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-27mb/google/poppy/variants/nami: Enable g2touch touchscreen deviceCrystal Lin
This change adds ACPI properties for GTCH7503 device. BUG=b:119169362 BRANCH=firmware-nami-10775.B TEST=Verify touchscreen works with this change Change-Id: I26e16b7e118121b3dd9a88c76d04898b97753df0 Signed-off-by: Crystal Lin <crystal_lin@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/29768 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-27mb/google/fizz/variants/karma: Disable SD controller and update GPIODavid Wu
The SD cardreader is on USB bus, not on SDIO/SDXC. BUG=b:119798840 BRANCH=master TEST=Compiles successfully and boot on DUT. Change-Id: I8015fe35a4ff79469b5781942f588c3e1b88b751 Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/29765 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-27mb/google/fizz/variants/karma: Enable touchscreen wakeupDavid Wu
Set GPIO GPP_B4 to high to enable touchscreen wakeup. BUG=b:119594783 BRANCH=master TEST=DUT can wake up with touchscreen. Change-Id: If0c9493dec367c7813047c7994cc83537aaef141 Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/29769 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-27mainboard/google/octopus/variants/ampton: Decrease I2C CLK frequencyCarl Yang
The touchpad and touch-panel CLK frequency should be smaller than 400 kHz which described in spec. Overwrite i2c speed parameters by overridetree.cb BUG=b:119540449 BRANCH=master TEST=emerge-octopus coreboot chromeos-bootimage flash bios and check the touchpad i2c frequency meets the spec. Change-Id: I32c3e1bbfc2cdf39e9b7865a69996e54346d5f93 Signed-off-by: Carl Yang <carl_yang@asus.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/29694 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-27nb/amd/amdmct/{mct,mct_ddr3}: Replace "magic" numbers with macrosElyes HAOUAS
MTRR addresses are publicly available at cpu/x86/mtrr.h, so use macros instead of "magic" numbers. Change-Id: I224136ed4a19199bae0223a1aae366b3dd4ef9cf Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29580 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-27mb/google/octopus/var/bobba: Deprecate board id < 2Furquan Shaikh
This change deprecates boards with id < 2. It updates touchscreen enable GPIO in overridetree and gets rid of variant.c to update enable GPIO at runtime. Additionally, it configures old enable GPIO as NC. BUG=b:119885949 Change-Id: I42fb7ef90e421118a8fdfa0d343d0bcf4a9bc087 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/29786 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-11-27mb/google/octopus/var/fleex: Deprecate bid 0Furquan Shaikh
This change gets rid of bid0_override_table as part of clean up effort to deprecate bid0. Additionally, it updates the touchscreen enable GPIO in overridetree and gets rid of variant.c to update enable gpio at runtime. BUG=b:119885949 Change-Id: If14abb324d9422720ca4d0f0859e092319d454ee Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/29785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-11-27mb/google/octopus: Update GPIO_178 in early_gpio_table in baseboardFurquan Shaikh
This change updates the configuration of GPIO_178 to be active low as per latest revision on different octopus variants. This effectively: 1. Gets rid of early_gpio_table in different variants -- phaser, meep, fleex, bobba. 2. Deprecates board id < 2 for bobba, board id < 1 for fleex and phaser. 3. Adds special early_gpio_table in yorp which has GPIO_178 as an active high signal. BUG=b:119885949 Change-Id: I024199a8f1f96db57f8fa60c4d265789cd3a0493 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/29784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-11-27mb/google/octopus: Configure all debug header lines as NCFurquan Shaikh
This change configures all the pads going to debug header as not connected. BUG=b:111569213 BRANCH=None TEST=None Change-Id: Ie3ffdbf6ad9b1682deaada91b5c225b4c8dd035b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/29780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-11-27mb/intel/icelake_rvp: Add USB port capablity informationAamir Bohra
This implementation adds USB port capablity map for ICL-U and ICL-Y RVP. Change-Id: I20bb43c47439df0a25ff148eae2b3e0546e4bc63 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/29792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-11-27src/{commonlib,drivers/intel/fslp1_1/include}: Fix typoFrans Hendriks
Correct typo of 'compilation' BUG=N/A TEST=N/A Change-Id: Iee6b8a8afc4d885d2d4ab9ee5d596e32e5e6d3f1 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29831 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2018-11-27siemens/mc_apl5: Adjust the settings for the PCIe root portsMario Scheithauer
This mainboard has four connected PCIe devices. The required root ports are switched on and configured. Change-Id: I82b13e1d245a172762ebd689ae136a762027033f Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/29810 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-27soc/intel/skylake: Add device settings for PL4 power limitPraveen hodagatta pranesh
PL4 is a preemptive CPU package peak power limit,it will never be exceeded. Power is preemptively lowered before limit is reached. This change provides option in devicetree and feeds FSP PowerLimit4 UPD for power limit purpose. Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Change-Id: I64b5a029104a102e5741e8b37c7992f2693180e8 Reviewed-on: https://review.coreboot.org/c/29808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-27soc/intel/common: Add audio controller device id for SKL-H pchPraveen hodagatta pranesh
This patch add new HDA controller pci id in common hda driver. BUG:None TEST:Boot to Yocto linux on kabylake rvp11 and verified audio playback functionality. Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Change-Id: I820115c31bf6b8e1f1afe900b68690d84b51c259 Reviewed-on: https://review.coreboot.org/c/29807 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Boon Tiong Teo <boon.tiong.teo@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-26sb/intel/common: Fix style issue in spi.cPatrick Georgi
Change-Id: Ife8f7f164b26bea65a0dcde0cab339a1bb599e38 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/29834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan T <stefan.tauner@gmx.at> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-11-26sb/intel/spi: read FLCOMP descriptor early and cache itStefan Tauner
Change-Id: I4e5fe3ff083f2d0db1cfde16550b57537d5f7262 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/c/28349 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-26drivers/spi: store detected flash IDsStefan Tauner
Change-Id: I36de9ba6c5967dddd08a71a522cf680d6e146fae Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/c/28347 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-26drivers/intel/fsp1_1/raminit.c: Report only when NVS HOB is missingFrans Hendriks
Missing hob 7.3 FSP_NON_VOLATILE_STORAGE_HOB is reported always. This hob is only generated by FSP during non-S3 and MRC data is changed. Now display missing FSP_NON_VOLATILE_STORAGE_HOB only when this hob is required. BUG=N/A TEST=Intel CherryHill CRB Change-Id: Ice8220149c2e44bb2da010d5a7d8bc4dbeca11e0 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Huang Jin <huang.jin@intel.com>
2018-11-26util/crossgcc: Document how to build the toolchain for another locationPatrick Georgi
One common issue with the toolchain is that it takes a very long time to build while it's somewhat volatile inside the coreboot tree. Installing the toolchain elsewhere helps keep it safe but since there is no reliable default location outside the tree, keep the default as is. Change-Id: Ic414cddfd3c7097412f3f2c3c7ec7b7191fa32de Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/29826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-11-26siemens/mc_apl1/variants/mc_apl*: Remove unneeded PTN readMario Scheithauer
An additional read of PTN configuration data at the end of the ptn3460_init function is not necessary. Change-Id: I5f7f647242e94b1af13757d00e80ed9813d435d0 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/29799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-11-26soc/intel/icelake: Add support to enable/disable USB charging in s3/S5Aamir Bohra
Change-Id: I0559b8a546f7a67759377c7f51b2faa2280aa797 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/29793 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-25nb/intel/i945: Add and use defines for registers of device 0:01.0Elyes HAOUAS
Some registers are not documented in "Mobile Intel 945 Express Chipset Family" datasheet but they are in "Intel 945G/945GZ/ 945GC/945P/945PL Express Chipset Family" datasheet. Change-Id: I81f68a5b16e195626d4d271f8c7036032611bea3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-11-25nb/intel/i945/early_init.c: Correct the PEG_LC address of DEV(0:01.0)Elyes HAOUAS
This bug/typo was spoted by Felix Held. As documented in the datasheet, to enable PMEGPE, HPGPE, GENGPE, we need to write 0x7 into DEV(0:01.0) register "PCI Express-G Legacy Control" located at 0xec. Used address at 0x114 to enable GPEs is likely a typo. Patch not tested. Change-Id: Iee1c1e4b7fef21608f2678a1d4104b668a66a7e5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/27307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-11-25nb/intel/gm45/northbridge.c: Check for NULL pointersArthur Heymans
Change-Id: Ic12a8c145d6348086f9931af93ce6d3b3dcb9039 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-24util/scripts/maintainers.go: drop special case for "THE REST"Patrick Georgi
It's not useful anymore. Change-Id: Iba7f10dc87301911ff5f73c182b41c268fba310a Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/29658 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-24MAINTAINERS: Drop "the rest" componentPatrick Georgi
The semantics in util/scripts/maintainers.go have changed in that a file can be part of multiple components. This means that all files are part of "the rest" now, which doesn't make much sense. Change-Id: I220afe27e78aa5358fca61851242812f2d763992 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/29657 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-23sb/intel/bd82x6x/early_usb.c: Fix formattingElyes HAOUAS
Remove whitespace between the function name and open parenthesis, and fix 81+ characters lines. Unnecessary comment about 'include sandybridge.h'removed. Change-Id: I0db1263ec11240003fe1f7080c758994fc0224d3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29428 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-23mb/google/kahlee: Enable 2T mode for liara in DVT phaseChris Wang
Change the board id detection to support rev5, since the 2T mode still needed in DVT build. BUG=b:116082728 TEST=verify by ODM. Change-Id: Ibb4cc1fd2bb54984cb7a8856ed7b9f49b78eddce Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/29779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-11-23arch/x86: drop special case cbfs locatorPatrick Georgi
CBFS used to have a special region for the x86 bootblock, which also contained a pointer to a CBFS master header, which describes the layout of the CBFS. Since we adopted other architectures, we got rid of the bootblock region as a separate entity and add the x86 bootblock as a CBFS file now. The master header still exists for compatibility with old cbfstool versions, but it's neatly wrapped in either the bootblock file or in a file carefully crafted at the right location (on all other architectures). All the layout information we need is now available from FMAP, a core part of a contemporary coreboot image, even on x86, so we can just use the generic master header locator in src/lib/cbfs.c and get rid of the special version. Among the advantages: the x86 header locator reduced the size of the CBFS by 64 bytes assuming that there's the bootblock region of at least that size - this breaks assumptions elsewhere (eg. when walking CBFS in cbfs_boot_locate() because the last file, the bootblock, will exceed the CBFS region as seen by coreboot (since it's CBFS - 64bytes). TEST=emulation/qemu-q35 still boots Change-Id: I6fa78073ee4015d7769ed588dc67f9b019d42d07 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reported-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/29801 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-23soc/intel/apollolake: Remove cycle in Kconfig symbol dependenciesPatrick Georgi
Change-Id: Iad60a5c8863283b7d373e1f6aaff48c40b7bb274 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/29812 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-23src/soc/intel/braswell/southcluster.c: Replace fixed values by definesFrans Hendriks
The GPIO and ACPI base sizes have defines, but they are not used. Use GPIO_BASE_SIZE and ACPI_BASE_SIZE. BUG=N/A TEST=Intel CherryHill CRB Change-Id: I348eda57ab9dc0bd45f8dc9ab0e7c47c462102fe Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29788 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-23src/soc/intel/baytrail/southcluster.c: Replace fixed values by definesFrans Hendriks
The GPIO and ACPI base sizes have defines, but they are not used. Use GPIO_BASE_SIZE and ACPI_BASE_SIZE. BUG=N/A TEST=Intel BayTrail CRB Change-Id: I3fe50effdb8236bc45d33a2345a773653df68d90 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Huang Jin <huang.jin@intel.com>
2018-11-23soc/intel/skylake: Drop FSP_CAR optionsNico Huber
It's not implemented for Skylake, all combinations that try to enable it either result in Kconfig or linker errors. Move `config SKIP_FSP_CAR` into drivers/intel/fsp1_1 where it's effective. TEST=Built Intel/Kunimitsu (FSP1.1) and Intel/KBLRVP8 (FSP2.0) default configs with and without this patch: binaries stay the same. Change-Id: Iae0a2d2c7fd7a71ed24118564e6080c4789cda28 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29533 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-11-23src/arch/x86/acpi.c: Create log area and extend TPM2 tableMichał Żygowski
According to newest TCG ACPI Specification for Family 1.2 and 2.0 Version 1.2, Revision 8, TPM2 ACPI table has two more fields LAML and LASA. Update the table structure definition, create the log area for TPM2 in coreboot tables and fill the missing fields in TPM2 table. TPM2 should be now probed well in SeaBIOS rel-1.12.0 or master. Tested on apu2 with Infineon SLB9665 TT2.0. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ie482cba0a3093aae996f7431251251f145fe64f3 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/29800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-23intelblocks/cpu: Fix wrong comment for P_Req field in PERF_CTL MSRWerner Zeh
The mentioned bits 14:8 are wrong as the functions always write bits 15:8. What happens is visible in the written code. There is no need for an extra comment. Change-Id: I59b4d24d01a0a8fa74912f9754e7bbb217ca269d Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/29798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2018-11-23siemens/mc_apl4: Set CPU clock to minimum ratioWerner Zeh
The power budget for this mainboard is very limited while the performance demand is low. Set the CPU clock to the lowest value to enable maximum efficiency and thus lowest power dissipation. Change-Id: I23c7c5393deb676b94f2b0ac25e21a7a44cd8cb3 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/29773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-23soc/intel/apollolake: Add Kconfig switch to enable minimum clock ratioWerner Zeh
Add a Kconfig switch to be able to set the CPU clock to the lowest possible ratio. If enabled the CPU will consume as little power as possible while providing the lowest performance. This setting can be overruled by the OS if it has an p-state driver which can adjust the clock to its need. Change-Id: I4a59586da72d1915749110a36f565fe2aa69e073 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/29772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-23intelblocks/cpu: Add function to set CPU clock to minimum valueWerner Zeh
Provide a library function to set the CPU frequency to minimum value. This will result in the lowest possible CPU clock with the lowest possible power consumption. This can be useful in mobile devices where the power dissipation is limited. This setting can be overruled by the OS if it has an p-state driver which can adjust the clock to it's need. Change-Id: I817095b13ab8cbaab82f25c72947b00ee854d549 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/29771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2018-11-23mb: Set coreboot as DSDT's manufacturer model IDElyes HAOUAS
Field 'OEMID' & "OEM Table ID" are related to DSDT table not to mainboard. So use macro to set them respectvely to "COREv4" and "COREBOOT". Change-Id: I060e07a730e721df4a86128ee89bfe168c69f31e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: David Guckian
2018-11-23MAINTAINERS: Add maintainer for all Siemens mc_xxxx mainboardsWerner Zeh
Change-Id: If8f662d088bf57fd27c5a01a47bc094dcb53a4de Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/29806 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-23MAINTAINERS: Add myself as maintainer for the getac/p470Patrick Georgi
Change-Id: Iae87a2e6f223f1d6e39034be4c8b511187eca6f5 Signed-off-by: Patrick Georgi <patrick@georgi.software> Reviewed-on: https://review.coreboot.org/c/29782 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-23cpu/x86/Kconfig.debug: Remove weird dependencies and commentsNico Huber
No need to hide prompts, it's a user choice anyway, they should know. The help texts were just rephrasing the prompts or stating the obvious. Change-Id: I5694a88f2da57af2a20357c4e22c7c648053cc26 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29802 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-23cpu/x86/Kconfig.debug: Move more options hereNico Huber
Gather x86 specific debug options and deflate their code a little. We keep their hiding rules and help texts, although they don't seem much useful. Change-Id: I3bb8e759fc6a4871d30fccff47babfb7a291b45c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29751 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-23soc/intel/common: Bring DISPLAY_MTRRS into the lightNico Huber
Initially, I wanted to move only the Kconfig DISPLAY_MTRRS into the "Debug" menu. It turned out, though, that the code looks rather generic. No need to hide it in soc/intel/. To not bloat src/Kconfig up any further, start a new `Kconfig.debug` hierarchy just for debug options. If somebody wants to review the code if it's 100% generic, we could even get rid of HAVE_DISPLAY_MTRRS. Change-Id: Ibd0a64121bd6e4ab5d7fd835f3ac25d3f5011f24 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29684 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-23mb/intel/icelake_rvp: Add support for ALPS touchpadAamir Bohra
BUG:none TEST:Verify cursor response and button clicks Change-Id: I4085b70560e2840c71b989348f56ca907e7cea4b Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/29777 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-23mb/intel/icelake_rvp: Add ICL U and Y RVP DIMM configurationAamir Bohra
List of ICL board variants 1. ICL-U DDR4 - All possible DDR4 memory type LPDDR4 - Memory down fixed DIMM configuration 2. ICL-Y All LPDDR4 DIMM on platform This patch ensures to have all proper SPD configuration. Change-Id: Id596a3c85b13559b3002dcadfee9c945256e28e7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/29770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2018-11-23mb/intel/icelake_rvp: Configure eSPI IO decode range for ECAamir Bohra
This implementation adds eSPI IO decode range for EC. 1. 0x800-0x8FF / 0x200-020F: EC host command range. 2. 0x900-0x9ff: EC memory map range. Change-Id: I69e6b3a83c072036c5b3ae801f8d80dfda82478e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/29764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2018-11-23util/cbfstool: Fix GCC error due to a shadowed declarationWerner Zeh
There is already a function with the name buffer_size(). Adding a local variable with the same name will lead to the following error on older GCC versions (e.g. version 4.4.7): declaration of 'buffer_size' shadows a global declaration To fix this rename the local variable to buffer_len. Change-Id: Ifae3a17152f2f9852d29a4ac038f7e5a75a41614 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/29776 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2018-11-22grunt: Default SPK_PA_EN to LOWRaul E Rangel
We need to default this to low so the speakers don't activate in S3. BUG=b:118248953 TEST=Used a scope to look at the line and made sure depthcharge still beeps. Change-Id: I70d2f4a3261d212b62e784fa7414e45b1d575612 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/29783 Reviewed-by: Daniel Kurtz <djkurtz@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-22drivers/intel/fsp1_1/cache_as_ram.inc: Dont include soc/car_setup.SFrans Hendriks
soc/car_setup.S is included when SKIP_FSP_CAR is enabled, but no chipset/SoC have car_setup.S available. Remove include and post_code() call always solving build errors. BUG=NA TEST=NA Change-Id: Iebae2940eb10c9ca9054437be4740c79137bcc61 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Huang Jin <huang.jin@intel.com>
2018-11-22util/cbfstool/rmodule.{c,h}: Fix typo and correct headerFrans Hendriks
Header contains ':' in copyright line. rmdoule is a typo Remove the ';' and correct typo to rmodule. BUG=N/A TEST=N/A Change-Id: I05b1fb80a81682646c9fba3d234de235b6bc9e8c Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2018-11-22src/drivers/intel/fsp1_1/Kconfig: Remove unused FSP_USES_UPDFrans Hendriks
CONFIG_FSP_USES_UPD is not used by FSP 1.1. Remove this config from this file. BUG=N/A TEST=Intel CherryHill CRB Change-Id: If922b6cb2d39b10f6657b4d80e54b226d1386c76 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Huang Jin <huang.jin@intel.com>
2018-11-22soc/drivers/intel/fsp1_1: Always report returned status of FspTempRamInit()Frans Hendriks
Returned status code FspTempRamInit() is not displayed when error occurs. Move the printk() call before the check for status. BUG=NA TEST=Portwell PQ7-M107 Change-Id: Id87e5c765d09f4ab199db9eba07a949b031a709a Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29695 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Huang Jin <huang.jin@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-22payloads/seabios: Update stable from 1.11.2 to 1.12.0Martin Kepplinger
SeaBIOS 1.12.0 has been tagged. News are * Initial support for "TPM CRB" hardware * Improved cdrom media reporting in the boot menu on QEMU * Improved floppy support on real floppy hardware * SeaVGABIOS support for QEMU "bochs-display" and QEMU "ramfb" displays * Several bug fixes and code cleanups among others, see http://seabios.org/Releases Tested by running it on a Thinkpad X230. Change-Id: I5f8364977ce957d3e8d84d7b046d1cec36b8da6a Signed-off-by: Martin Kepplinger <martink@posteo.de> Reviewed-on: https://review.coreboot.org/c/29724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-22riscv: fix bug of sifive-gpt.pyXiang Wang
The GPT version must be "00 00 01 00" and the little endian should be represented as 0x10000. Please refer to: https://en.wikipedia.org/wiki/GUID_Partition_Table Change-Id: Ib025197fc96f32823e687a89de0cee51c952b031 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/c/29767 Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-22mb/google/poppy/variant/nocturne: enable USB acpiNick Vaccaro
Main objective for this change is to export the bluetooth reset gpio to the kernel for use in an rf-kill operation. To do so, we enable USB acpi and define all of the USB2 devices, which includes bluetooth's reset gpio information. This change produces the following nodes in the SSDT : Scope (\_SB.PCI0.XHCI.RHUB.HS01) { Name (_DDN, "USB Type C Port 1") // _DDN: DOS Device Name Name (_UPC, Package (0x04) // _UPC: USB Port Capabilities { 0xFF, 0x09, Zero, Zero }) Name (_PLD, ToPLD ( PLD_Revision = 0x2, PLD_IgnoreColor = 0x1, PLD_Red = 0x0, PLD_Green = 0x0, PLD_Blue = 0x0, PLD_Width = 0x0, PLD_Height = 0x0, PLD_UserVisible = 0x1, PLD_Dock = 0x0, PLD_Lid = 0x0, PLD_Panel = "UNKNOWN", PLD_VerticalPosition = "CENTER", PLD_HorizontalPosition = "CENTER", PLD_Shape = "OVAL", PLD_GroupOrientation = 0x0, PLD_GroupToken = 0x0, PLD_GroupPosition = 0x0, PLD_Bay = 0x0, PLD_Ejectable = 0x0, PLD_EjectRequired = 0x0, PLD_CabinetNumber = 0x0, PLD_CardCageNumber = 0x0, PLD_Reference = 0x0, PLD_Rotation = 0x0, PLD_Order = 0x0, PLD_VerticalOffset = 0x0, PLD_HorizontalOffset = 0x0) ) // _PLD: Physical Location of Device } Scope (\_SB.PCI0.XHCI.RHUB.HS03) { Name (_DDN, "Bluetooth") // _DDN: DOS Device Name Name (_UPC, Package (0x04) // _UPC: USB Port Capabilities { 0xFF, 0xFF, Zero, Zero }) Name (_PLD, ToPLD ( PLD_Revision = 0x2, PLD_IgnoreColor = 0x1, PLD_Red = 0x0, PLD_Green = 0x0, PLD_Blue = 0x0, PLD_Width = 0x0, PLD_Height = 0x0, PLD_UserVisible = 0x0, PLD_Dock = 0x0, PLD_Lid = 0x0, PLD_Panel = "UNKNOWN", PLD_VerticalPosition = "CENTER", PLD_HorizontalPosition = "CENTER", PLD_Shape = "UNKNOWN", PLD_GroupOrientation = 0x0, PLD_GroupToken = 0x0, PLD_GroupPosition = 0x0, PLD_Bay = 0x0, PLD_Ejectable = 0x0, PLD_EjectRequired = 0x0, PLD_CabinetNumber = 0x0, PLD_CardCageNumber = 0x0, PLD_Reference = 0x0, PLD_Rotation = 0x0, PLD_Order = 0x0, PLD_VerticalOffset = 0x0, PLD_HorizontalOffset = 0x0) ) // _PLD: Physical Location of Device Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings { GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.PCI0.GPIO", 0x00, ResourceConsumer, , ) { // Pin list 0x0062 } }) Name (_DSD, Package (0x02) // _DSD: Device-Specific Data { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */, Package (0x01) { Package (0x02) { "reset-gpio", Package (0x04) { \_SB.PCI0.XHCI.RHUB.HS03, Zero, Zero, One } } } }) } Scope (\_SB.PCI0.XHCI.RHUB.HS05) { Name (_DDN, "USB Type C Port 2") // _DDN: DOS Device Name Name (_UPC, Package (0x04) // _UPC: USB Port Capabilities { 0xFF, 0x09, Zero, Zero }) Name (_PLD, ToPLD ( PLD_Revision = 0x2, PLD_IgnoreColor = 0x1, PLD_Red = 0x0, PLD_Green = 0x0, PLD_Blue = 0x0, PLD_Width = 0x0, PLD_Height = 0x0, PLD_UserVisible = 0x1, PLD_Dock = 0x0, PLD_Lid = 0x0, PLD_Panel = "UNKNOWN", PLD_VerticalPosition = "CENTER", PLD_HorizontalPosition = "CENTER", PLD_Shape = "OVAL", PLD_GroupOrientation = 0x0, PLD_GroupToken = 0x0, PLD_GroupPosition = 0x0, PLD_Bay = 0x0, PLD_Ejectable = 0x0, PLD_EjectRequired = 0x0, PLD_CabinetNumber = 0x0, PLD_CardCageNumber = 0x0, PLD_Reference = 0x0, PLD_Rotation = 0x0, PLD_Order = 0x0, PLD_VerticalOffset = 0x0, PLD_HorizontalOffset = 0x0) ) // _PLD: Physical Location of Device } Scope (\_SB.PCI0.XHCI.RHUB.HS07) { Name (_DDN, "POGO") // _DDN: DOS Device Name Name (_UPC, Package (0x04) // _UPC: USB Port Capabilities { 0xFF, 0xFF, Zero, Zero }) Name (_PLD, ToPLD ( PLD_Revision = 0x2, PLD_IgnoreColor = 0x1, PLD_Red = 0x0, PLD_Green = 0x0, PLD_Blue = 0x0, PLD_Width = 0x0, PLD_Height = 0x0, PLD_UserVisible = 0x0, PLD_Dock = 0x0, PLD_Lid = 0x0, PLD_Panel = "UNKNOWN", PLD_VerticalPosition = "CENTER", PLD_HorizontalPosition = "CENTER", PLD_Shape = "UNKNOWN", PLD_GroupOrientation = 0x0, PLD_GroupToken = 0x0, PLD_GroupPosition = 0x0, PLD_Bay = 0x0, PLD_Ejectable = 0x0, PLD_EjectRequired = 0x0, PLD_CabinetNumber = 0x0, PLD_CardCageNumber = 0x0, PLD_Reference = 0x0, PLD_Rotation = 0x0, PLD_Order = 0x0, PLD_VerticalOffset = 0x0, PLD_HorizontalOffset = 0x0) ) // _PLD: Physical Location of Device } BUG=b:119275094 TEST=build and flash to nocturne, log into nocturne and 'cat /sys/firmware/acpi/tables/SSDT > /tmp/ssdt.dml', copy that ssdt.dsml to /tmp/ssdt.dml on host machine, 'iasl -d /tmp/ssdt.dml', then verify that "reset gpio" shows up in the HS03 node's _DSD package in the table. Change-Id: I65d9b580fd69fd0a2c84f14b78a8e8b5e9217b16 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/29622 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rajat Jain <rajatja@google.com>
2018-11-22drivers/usb/acpi: add reset gpio to usb acpi driverNick Vaccaro
Add ability to define a reset gpio in acpi for a USB device. BUG=b:119275094 Change-Id: Ife3ea43a1eadf2548aa52b8fbd792e691d7cc7f2 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/29615 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rajat Jain <rajatja@google.com>
2018-11-22sb/intel/common: Reset Pre-OP after atomic SPI cycle is finishedWerner Zeh
Make sure that the Pre-Op register is cleared when an atomic cycle has been finished without errors. Change-Id: Ied88337125b125474b411e2f39f668171d15bfac Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/29634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-11-22soc/intel/icelake: Create macros for FSP consumptionSubrata Banik
1. Modify PCIEXBAR to accomodate Type-C Root Port 2. LPSS device mode selection Change-Id: Ib7e4bc304f93e4b63ac2d7f194ca441dd96dd943 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/29697 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-22mb/google/poppy/variants/nami: Split FP MCU Wake and IRQ GPIOSShelley Chen
We are seeing problems (interrupt storm) with using the same gpio for FP MCU wake and irq signals. Reverting back to using separate gpios for wake and irq until we resolve the issue. BUG=b:119447525, b:115706071 BRANCH=Nami TEST=Run powerd_dbus_suspend from kernel and make sure see DUT drop into S0ix in the EC console. Also, unlock from lock screen with fingerprint. Change-Id: Id7987f28526256808b8ed49e66f66298f7cdbcee Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/29665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Vincent Wang <vwang@google.com>
2018-11-21(console,drivers/uart)/Kconfig: Fix dependenciesNico Huber
The dependencies of CONSOLE_SERIAL and DRIVERS_UART were somehow backwards. Fix that. Now, CONSOLE_SERIAL depends on DRIVERS_UART, because it's using its interface. The individual UART drivers select DRIVERS_UART, because they implement the interface and depend on the common UART code. Some guards had to be fixed (using CONSOLE_SERIAL now instead of DRIVERS_UART). Some other guards that were only about compilation of units were removed. We want to build test as much as possible, right? Change-Id: I0ea73a8909f07202b23c88db93df74cf9dc8abf9 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-11-21mainboard/ocp/wedge100s: Add vboot supportPhilipp Deppenwiese
* Add RO only FMAP. * Add kconfig options. Tested=OCP Wedge100s Change-Id: I1979e0263e41f21c01c407ac81ad1198a53741e8 Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/c/29593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-21soc/intel/fsp_broadwell_de: Add vboot supportPhilipp Deppenwiese
Enable vboot2 in romstage. Change-Id: I7f1a1e8538999c5e4e54f3a4aa0cdf6d8a309c4f Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/c/29590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-21payloads/tianocore: rebase patches to UDK2018 releasePiotr Król
Patches should be applied against edk2 release instead of arbitrary commit. This aims to simplify Tianocore payload support by other platforms. Change-Id: Ib409f6f93eb64d7a9a2f09a75f8e637ab8689410 Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/27615 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-21soc/intel/.../Kconfig: Drop SOC_INTEL_COMMON_BLOCK_I2C_DEBUGNico Huber
It's dead. Change-Id: I1fc051937a36878eab23f6022bc42028d5606c83 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-11-21util/ifdtool: Add IceLake platform support under IFDv2Aamir Bohra
Change-Id: Ib69a2cbc3d8ab9f35c940e95b0edb4b04b50b716 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://chromium-review.googlesource.com/1162995 Commit-Ready: ChromeOS CL Exonerator Bot <chromiumos-cl-exonerator@appspot.gserviceaccount.com> Tested-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/c/29696 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-21ACPI: Fix DSDT's revision fieldElyes HAOUAS
DSDT revision is =1 for ACPI v1 and =2 for greater ACPI version. This will cause the AML interpreter to use 32-bit integers and math if the version is 1, and 64-bit if the version is >=2. Current spec version is 2 for ACPI 6.2-a. Change-Id: I77372882d5c77b7ed52dcdd88028403df6f6fa7f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29626 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-21mb/google/octopus: Update TSR1 threshold settingsSumeet Pawnikar
Update passive temperature threshold value from 50C to 52C and critical temperature threshold from 90C to 80C for TSR1 sensor. BUG=b:79779737 TEST=Build and verified on Bobba/Bobba360/Sparky/Sparky360 boards Change-Id: Iffef8afe0f1c6c80a6ae8ecb831aaf749443980e Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/29264 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-21src/cpu/intel/Kconfig: Remove dead sourceElyes HAOUAS
fsp_model_206ax was removed in Change-Id: I7b6bc4bfd Change-Id: If77426fcb9f30f3e8b79d7c134053276701a5ecc Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-11-21soc/intel/braswell: Disable OS use of HPETFrans Hendriks
The timer interrupts don't appear when HPET is enabled. This result in Linux reporting 'MP-BIOS bug: 8254 timer not connected to IO-APIC' Enabling CONFIG_DISABLE_HPET disables OS use of HPET. Intel issue 4800413 (doc #5965535) reports Windows7/Ubuntu Installation Hang or Slow Boot Issue. BUG=Intel #4800413 TEST=Portwell PQ7-M107 Change-Id: Ie9a78dcc736eb057c040a0a303c812adb1f76f3c Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2018-11-21nb/intel/haswell: Move MMCONF_BASE_ADDRESS to northbridge KconfigElyes HAOUAS
Change-Id: I44f27405fc8ccbe54c7d19b70327da866390a156 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/28603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2018-11-21soc/intel/cannonlake: Fix IO decode setupDuncan Laurie
This change makes the early IO decode setup mirror that of other Intel SOCs and fixes issues with COM1 not being enabled properly. Tested by successfully successfully receiving serial output from an 8250IO UART device at the standard 0x3f8 base address. Change-Id: I9bd894fea62b78b81e5c80b5e88a539ebddac2df Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2018-11-20drivers/uart/Kconfig: Be smarter about DRIVERS_UART_8250IONico Huber
It defaults to y to avoid having to select it per mainboard. But that makes a mess because it results in linker conflicts unless other UART drivers disable it explicitly. We try to be smarter about the default value for now. The real solu- tion would be to hardcode it per mainboard. But who knows which boards actually have it? Change-Id: I7e755fe0e4f6d1c31ef2854603a5510c3cdc4967 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29571 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>