summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-11-07soc/intel/skylake: Fix SATA booting to OS issueSubrata Banik
SATA device remains unrecognized if connected at Port 2. Port control and Status register (PCS) is by default set by hardware to the disabled state as a result of an initial power on reset. OS read PCS register during boot causes disabling of SATA ports and can't detect any devices. BRANCH=none BUG=chrome-os-partner:59335 TEST=Build and boot SKL from SATA device connected at Port 2. Change-Id: I4866ca44567f5024edaca2d48098af5b4c67a7ac Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/17229 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-07vboot: Disable vboot verification when Chrome EC disabledNaresh G Solanki
When Chrome EC is disabled, vboot hash is not available during S3 resume Hence disable vboot verification when Chrome EC is not available. Change-Id: I665f5f0e2e53da7b735de30443d323572d8a1a9c Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17246 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-07soc/intel/skylake: Avoid use of variable Local0 in TEVT in thermal.aslNaresh G Solanki
Avoid use of Local0 variable in TEVT acpi method. If mainboard doesn't expose any thermal sensor, then warning is generated for variable Local0 not been used. Change-Id: I0634961a01144e41a8480c8c6ed8b7fdd358e768 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17245 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-07soc/intel/skylake: Add device id for PCH-YNaresh G Solanki
Add device id for PCH-Y used in Kaby Lake RVP3 board. Change-Id: I9235265cf88e4d044e7216f53e6da7021fb68238 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17244 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-07riscv: Unify SBI call implementations under arch/riscv/Jonathan Neuschäfer
Note that currently, traps are only handled by the trap handler installed in the bootblock. The romstage and ramstage don't override it. TEST=Booted emulation/spike-qemu and lowrisc/nexys4ddr with a linux payload. It worked as much as before (Linux didn't boot, but it made some successful SBI calls) Change-Id: Icce96ab3f41ae0f34bd86e30f9ff17c30317854e Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17057 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-11-07mb/lowrisc/nexys4ddr: Actually fix the UART clock setupJonathan Neuschäfer
Ron's code calculated the DLL and DLM registers of the 8250 UART, but that's the job of the UART driver. uart_input_clock_divider isn't needed anymore because the default value of 16 works. As a bonus, the baud rate can now be selected in Kconfig, instead of being hardcoded at 115200. TEST=Booted the board at 9600 and 115200 baud. Change-Id: I3d5e49568b798a6a6d944db1161def7d0a2d3b48 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17188 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-11-06soc/intel/common: log event when MRC cache is updatedAaron Durbin
Log when the MRC cache is attempted to be updated with status of success or failure. Just one slot is supported currently which is deemed 'normal'. This is because there are more slots anticipated in the future. BUG=chrome-os-partner:59395 Change-Id: I0f81458325697aff9924cc359a4173e0d35da5da Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17231 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-11-06elog: add sources to reflect full event type namespace usageAaron Durbin
Some events were added in other places, but coreboot's elog namespace wasn't updated. As such there's a collision with the thermtrip event. This change at least updates the elog information to reflect potential event type uage. BUG=chrome-os-partner:59395 Change-Id: Ib82e2b65ef7d34e260b7d7450174aee7537b69f6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17230 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-11-06elog: fix default elog_add_event_raw() declarationAaron Durbin
When CONFIG_ELOG isn't used default empty inline functions are provided, however the elog_add_event_raw() had the wrong type signature. Fix that. BUG=chrome-os-partner:59395 Change-Id: Iaee68440bbafc1e91c88a7b03e283fc3e72de0a3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17232 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-11-06Add option to use Ada code in ramstageNico Huber
If selected, libgnat will be linked into ramstage. And, to support Ada package intializations, we have to call ramstage_adainit(). Change-Id: I11417db21f16bf3007739a097d63fd592344bce3 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/16944 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-04reef: tune trackpad i2c frequency to 400kHzAaron Durbin
This brings the frequency down to 400kHz which is spec for fast i2c. BUG=chrome-os-partner:58889 Change-Id: Ibc5f152e55ed618f18ac6425264f086b1f2d1ffa Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17215 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-04reef: tune tpm i2c frequency to 400kHzAaron Durbin
This brings the frequency down to 400kHz which is spec for fast i2c. BUG=chrome-os-partner:58889 Change-Id: I8689a062b5457aa431eaa7fb688a7170dad83fcf Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17214 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-03mainboard/intel/kblrvp: Update onboard memory specific configsNaresh G Solanki
1. Update dq, dqs map & Rcomp strength & Rcomp target. 2. Fix rvp3.spd.hex byte 2 to 0x0F(JEDEC LPDDR3 memory type). Change-Id: I7efc3499b915d1e414cfe914830232993ef10ba2 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17162 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2016-11-03mainboard/intel/kblrvp: Update gpio.h, spd.h & mainboard.cNaresh G Solanki
1. Update gpio.h to set proper pad config for Kaby Lake RVP3. 2. Set spd index to zero. 3. Remove nhlt specific init. Change-Id: I41a312d92acd2c111465a5e8f1771158e3f33e2b Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17161 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-03google/veyron*: change .ddrconfig from 14 to 3ZhengShunQian
There are two configs, sdram-lpddr3-hynix-2GB.inc and sdram-lpddr3-samsung-2GB-24EB.inc that use .ddrconfig = 14. Changing .ddrconfig from 14 to 3 improves performance especially on contiguous memory accesses. Comparing the .ddrconfig: - if .ddrconfig = 3, C RDRR RRRR RRRR RRRR RBBB CCCC CCCC C--- - if .ddrconfig = 14, C DRBB BRRR RRRR RRRR RRRR CCCC CCCC C--- where - R: indicates Row bits - B: indicates Bank bits - C: indicates Column bits - D: indicates Chip selects bits .ddrconfig = 3 has multiple banks switching which improves DDR timing. BUG=chrome-os-partner:57321 TEST=Boot from fievel and play video BRANCH=veyron Change-Id: Ifdcedc28e84429b8b79c7553b38b667631d29c09 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 93882e4f2000d93c9dae5e6d4b2e1f4b7bc9489e Original-Change-Id: Ic98ebae48609a7604ec678b6bd14dd2b29b669c4 Original-Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/404691 Original-Commit-Ready: Shunqian Zheng <zhengsq@rock-chips.com> Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17210 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-03google/veyron*: add DDR configs for new samsung DDRZhengShunQian
Add the new samsung DDR configs for all veyron except veyron_rialto: * K4E6E304EB-EGCE, ramid = 0010, 4GB * K4E8E324EB-EGCF, ramid = 1100, 2GB BRANCH=veyron BUG=none TEST=boot fievel board Change-Id: I747aa86f8c93174651a28face63b3386e22b23b3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5f55462e71bd481eda85af3d582cfe5b9873cc9c Original-Change-Id: I19123634c994f685683323f7d85cc4d35814e2ab Original-Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/345748 Original-Commit-Queue: Ren Kuo <ren.kuo@quantatw.com> Original-Reviewed-by: Philip Chen <philipchen@chromium.org> Original-(cherry-pick from cc990f27024255a326fd9fa9644deb28b01a31a7) Original-Reviewed-on: https://chromium-review.googlesource.com/404690 Original-Commit-Ready: Shunqian Zheng <zhengsq@rock-chips.com> Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17209 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-03rockchip/rk3399: sdram.c: Fix msch ddrconfig register errorLin Huang
Fix msch ddrconfig register write error. Also make sure that the row number configured in msch is equal to the row number configured in the DDR controller. This would not affect systems with 4GB of memory, but is needed for 2GB configurations. BUG=None BRANCH=None TEST=Boot from kevin Change-Id: Ic95b3371faec5b31c32b011c50e55e83d949e74d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: dfa43d3d44839d9685b6393157f51b646e9996de Original-Change-Id: I0c95378bf937a245b7cdc0583c5d2ed1347f2a3e Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/399563 Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17208 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-03soc/intel/apollolake: Implement SPI flash status register readFurquan Shaikh
This was a dummy implementation until now which returned -1 always. Add support for reading SPI flash status register (srp0). BUG=chrome-os-partner:59267 BRANCH=None TEST=Verified by enabling and disabling write-protect on reef that the value of SRP0 changes accordingly in status register read. Change-Id: Ib1349605dd87c4a087e416f52a8256b1eaac4f4c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17205 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-02nb/intel/i945/early_init.c: Use "IS_ENABLED(CONFIG_ ....)"Elyes HAOUAS
Change-Id: I230b5425ac9e916a5ee10a49eeaf5d6d44fd49e6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17192 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02vendorcode/amd/f14: Fix ignored argument in IDS_HDT_CONSOLEŁukasz Dobrowolski
String format required two arguments however those were packaged in ( , ) so the left one was ignored. Change-Id: I59698319d5ff4215f296356147b4e22229cc9245 Signed-off-by: Łukasz Dobrowolski <lukasz@dobrowolski.io> Reviewed-on: https://review.coreboot.org/17118 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-11-02riscv: Add a bandaid for the new toolchainRonald G. Minnich
After I did a new toolchain build, I found the the mhartid register value is wrong for Spike. The docs seem to agree with Spike, not the code the toolchain produces? Until such time as the bitstreams and toolchain can find a way to agree, just hardcode it. We've been playing this game for two years now so this is hardly a new approach. This is intentionally ugly because we really need the toolchains and emulators and bitstreams to sync up, and that's not happening yet. Lowrisc allegedly implements the v1.9 spec but it's PTEs are clearly 1.7. Once it all settles down we can just use constants supplied by the toolchain. I hope the syncup will have happened by the workshop in November. This gets spike running again. Change-Id: If259bcb6b6320ef01ed29a20ce3d2dcfd0bc7326 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17183 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2016-11-02amd/hudson: Add PSP2 build for combo BIOSMarc Jones
The Stoney processor can use multiple directory structures. Turn this feature on in the makefile. Original-Signed-off-by: Marc Jones <marcj303@gmail.com> Original-Tested-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> (cherry picked from commit a3334632fd53c07a046c9b23161f6ee67e5cb16e) Change-Id: I40a9ef2e6bed51bc339d3f9ae7c6f316192c4a78 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17149 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Zheng Bao <fishbaozi@gmail.com>
2016-11-02util/amdfwtool: Increase space used for structuresMarc Jones
Double the space for psp2dir to 0x200. Based on advice from AMD, increase the region containing the signature to 4K. Original-Signed-off-by: Marc Jones <marcj303@gmail.com> Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> (cherry picked from commit e03a9402711c3a210816d0aa32865491a0523639) Change-Id: If60132f913928bab0c2fe4aacedf342080929599 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17148 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Zheng Bao <fishbaozi@gmail.com>
2016-11-02util/amdfwtool: Add PSP2 options to optstringMarc Jones
Original-Signed-off-by: Marc Jones <marcj303@gmail.com> Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> (cherry picked from commit 482b65c219b932fd374f2ac469a023db219a66de) Change-Id: I0a24a0aa4c7d9f4a8cc3ee9b7da60ea7704e6f17 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17147 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Zheng Bao <fishbaozi@gmail.com>
2016-11-02util/amdfwtool: Fix duplicate long option nameMarshall Dawson
Make the PSP2 smufirmware2 name unique so the command-line option gets picked up. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: <marcj303@gmail.com> (cherry picked from commit 98cf3880797f72aeb7169c3f8718a10092af9624) Change-Id: I5430cf8b81fb03c95e6ee9d7e53455e6224256ff Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17146 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02northbridge/amd: Modify 00670F00 chip.h to match DCTMarshall Dawson
The Stoney device supports only a single channel of DRAM with two DIMMs. Correct the dimmensions of the SPD lookup array. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: <marcj303@gmail.com> (cherry picked from commit 54a5e4a7092b77cca90894e86387f719fa3aa2c8) Change-Id: Ib776133e411d483bb5b7e3c070199befc631d209 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17145 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-11-02northbridge/amd: Update 00670F00 asl for reduced hardwareMarshall Dawson
Remove the language associated with the Carrizo Gfx PCIe bridges. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> (cherry picked from commit cc32b09b0f0137c11d82f35274ca33e013f73748) Change-Id: I8b67a646f98667d500fcee5da8389c10483488da Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17144 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-11-02northbridge/amd: Update all names and IDs for 00670F00Marc Jones
Modify the new Stoney support files to match the APU's IDs and codename. Original-Signed-off-by: Marc Jones <marcj303@gmail.com> Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> (cherry picked from commit de626730758def76e558294762a06d8ec9950cb9) Change-Id: Idc914bc80a27ac13426fdf00fc3f578ce072086f Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17143 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02northbridge/amd: Copy 00660F01 directories to 00670F00Marc Jones
Prepare for new 00670FF00 (StoneyRidge) support. Original-Signed-off-by: Marc Jones <marcj303@gmail.com> Original-Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Tested-by: Marshall Dawson <marshalldawson3rd@gmail.com> (cherry picked from commit 037cf16883fafd329a15f903ddf97e24a879bcce) Change-Id: I130d4f13beb2c1d71e4e4e9be5011f7993b34660 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17142 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-11-02pci_ids.h: Add ID for amd/00670F00 northbridgeMarshall Dawson
Add the D18F0 device ID for the Stoney APU. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> (cherry picked from commit c0fd7f70527c273bcbdce5655a21ca4de4854428) Change-Id: Ib599fc6119a3cef53f4f179c2fcd0e45905d81a4 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17141 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02cpu/amd: Update files for 00670F00Marc Jones
Add StoneyRidge specific IDs, code, whitespace, and fix Makefles and Kconfig files. Original-Signed-off-by: Marc Jones <marcj303@gmail.com> Original-Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Tested-by: Marshall Dawson <marshalldawson3rd@gmail.com> (cherry picked from commit 0bd1dc834792453d8e66216fa9a70afe2f7537d7) Change-Id: Id79f316a89b3baeae95e221fb872dc8a86e7b0f1 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17140 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02cpu/amd: Copy 00660F01 to 00670F00Marc Jones
Prepare for new 00670F00 (StoneyRidge) support. Original-Signed-off-by: Marc Jones <marcj303@gmail.com> Original-Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Tested-by: Marshall Dawson <marshalldawson3rd@gmail.com> (cherry picked from commit 87d26e05189247685df0ca6492dc3181a1bad5e8) Change-Id: Ib296ad32a061669b28dae742cac08bb75fdd0de4 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17139 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-02soc/intel/apollolake: Skip FSP initiated core/MP initVenkateswarlu Vinjamuri
Enable skip FSP initiated core/MP init as it is implemented in coreboot. BUG=chrome-os-partner:56922 BRANCH=None Change-Id: I9417dab3135ca1e0104fc3bde63518288bcfa76a Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/17201 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-02soc/intel/apollolake: Disable Monitor and Mwait featureVenkateswarlu Vinjamuri
Monitor/Mwait is broken on APL. So, it needs to be disabled. BUG=chrome-os-partner:56922 BRANCH=None Change-Id: I12cd4280de62e0a639b43538171660ee4c0a0265 Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/17200 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-11-02ec/lenovo/h8: move H8_SOUND_REPEAT downwards to it's commentAlexander Couzens
Change-Id: Ib147d90c31421c46faf99517fd07d290fd6b90a9 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/17036 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-11-02ec/lenovo/h8: don't load configuration when booting from s3Alexander Couzens
Some user might change some devices. After a suspend this reset to the (nvram) defaults which breaks the user expectation. Change-Id: Ifacca35210474ec3db41a53d2ad18f3798b14077 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/16215 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02ec/lenovo/h8: move charge priority into own functionAlexander Couzens
Change-Id: I53c7cffd0f32f9babc5fb70d5a2440a7d3377602 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/17035 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-11-02nb/i945/gma.c: use an if else statement for use of native initArthur Heymans
Change-Id: I1e964ed939ca5282008253e3fbdd1d2fa5cbf278 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17076 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-02nb/i945/gma.c: Do not try to load vbios when selecting native initArthur Heymans
This fixes a typo introduced in 9c5fc62f: "nb/i945/gma.c: use IS_ENABLED instead of #if, #endif". Change-Id: I2c9ca796767a507483c32867f9b7f172842a1ab3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17075 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-02rockchip/rk3399: display: Do not allocate framebuffer in corebootLin Huang
framebuffer address is dynamically chosen by libpayload now, so there's no need to configure it in coreboot. CQ-DEPEND=CL:401402 BUG=chrome-os-partner:58675 BRANCH=none TEST=Boot from kevin, dev screen is visible Change-Id: I9f1e581d5c63b3579b26be22ce5c8d1e71679f6f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b3b6675420592c30e1e0abc8f8e9dd6ed5abd04c Original-Change-Id: I7e3162f24a4dc426fe4e10d74865cf0042c80db5 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/401401 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17109 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02rockchip/rk3399: sdram: Reset system if switch to index1 failsLin Huang
Near the end of DDR initialization, the system switches to the index1 configuration. Sometimes this failed and a status bit that coreboot was waiting for was never set, hanging the system. Instead, give the system 100ms to reach the new configuration or reboot it, which generally fixes the issue. Also reset when training the index1 configuration fails. BUG=chrome-os-partner:57988 BRANCH=None TEST=The error condition now leads to a reboot of coreboot which recovers the system, instead of hanging. Change-Id: Icb4270369102ff7a4ce91b0677e04b4eb10f1204 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ca250d0628ea3b6b39d5131246eaba68637c5140 Original-Change-Id: Id6e8936d90e54b733ac327f8476d744b45639232 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/399681 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17106 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02rockchip/rk3399: sdram: Fix data training functionLin Huang
1. Update write leveling value to 0x200. When the wrdqs slave delay is changed to 0x200, the phase between the dqs and the clock is 0 degrees. The pcb layout can make sure the tDQSS timing is smaller than 0.25tck, so this value is useful for both higher and lower frequencies. 2. Disable read leveling for LPDDR3. The read leveling result is unreliable - the value is not in the middle of the read eye. To fix this, disable read leveling and fix the read DQSn slave delay setting for DQn to 0x080 (1/4 cycle delay of the input signal). BUG=None BRANCH=None TEST=Boot from kevin; Check by shmoo read eye and stability test, that the updated value of 0x80 is better. Change-Id: Ia72b601d9bf4e34ba1b0b4584b2c5c3ce9dafbd4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 37e8dfe783db3ce71aa026b4609ed0bfa16db06f Original-Change-Id: I2a5d40c0348449b2a7c609c1db65da4ed5f1c09f Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Jeff Chen <cym@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/396598 Original-Commit-Ready: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Reviewed-on: https://review.coreboot.org/17105 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02rockchip/rk3399: sdram: also prepare the index1 configurationLin Huang
To enable DDR Dynamic Voltage and Frequency Scaling (DVFS) we need to train alternative configurations first, so do the training and store the values. BUG=None BRANCH=None TEST=Boot from kevin Change-Id: I944a4b297a4ed6966893aa09553da88171307a42 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 94533ff3ba21bcb0ace00bedcf0cebb89a341be2 Original-Change-Id: I4a98bc0db5553d154fedb657e35b926a92aa80c7 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/386596 Original-Commit-Ready: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17104 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02intel/{skylake,apollolake}: Enable signalling of error conditionPatrick Georgi
Testing for "devfn < 0" on an unsigned doesn't work, and i2c_bus_to_devfn returns an int (with -1 for "error"), so use int for devfn. Adapt Change-Id I7d1cdb6af4140f7dc322141c0c018d8418627434 to fix more instances. Change-Id: I001a9b484a68e018798a65c0fae11f8df7d9f564 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1357450, #1357449 Reviewed-on: https://review.coreboot.org/17054 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02rockchip/rk3399: Reserve enough framebuffer memory for 32bpp hires panelsJulius Werner
Some of our RK3399 devices have panel resolutions as high as 2400x1600. With 16bpp that barely still fit into an 8MB framebuffer, but then we changed it to 32bpp for better image quality... Note that this is a band-aid. Coreboot-allocated framebuffers shouldn't be used at all on ARM64 devices, since libpayload is perfectly capable to dynamically allocate it with the right size based on EDID-information on this architecture. That will require some more elaborate work to be fixed with later patches. BRANCH=gru BUG=chrome-os-partner:58044 TEST=Warm-reboot Kevin on the dev screen, confirm that you don't see the lower half of the screen that overflowed our allocated framebuffer preserved from the last boot as soon as the backlight turns on. Change-Id: I00a63cfef35a8ee734543abbdb298344fb529283 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d2718efcacb50371624d9f6a3b586c298e8c2fec Original-Change-Id: Ia1fa28971c65d7d0639966e715f742309245172b Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/399966 Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/17108 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-01google/eve: Add new boardDuncan Laurie
Add the eve board files using kabylake and FSP 2.0. BUG=chrome-os-partner:58666 TEST=build and boot on eve board Change-Id: I7ca71fe052608d710ee65d078df7af7b55d382bc Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17177 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-11-01soc/apollolake: Add soc core initRavi Sarawadi
Add soc core init to set up the following feature MSRs: 1. C-states 2. IO/Mwait redirection BUG=chrome-os-partner:56922 BRANCH=None TEST= Check C-state functioning using 'powertop'. Check 0xE2 and 0xE4 MSR to verify IO/Mwait redirection. Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: I99b66b02eb790b6b348be7c964d21ec9a6926926 Reviewed-on: https://review.coreboot.org/17168 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-10-31superiotool: Add undocumented registers of ITE IT8783E/FNico Huber
Dumping and behavioral analysis have shown that there are more registers in the environment control of the IT8783E/F than documented in my data- sheet. This adds every register that wasn't 0x00/0xff by default. The default values are guesswork: those that looked like sensor readings became NANA, others are taken from dumps. Change-Id: I7e39700c9b98ed5be9f085bc8ffd848006310254 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17005 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-10-31superiotool: Add register definitions for ITE IT8783E/FNico Huber
Values are taken from an unpublished datasheet. With the exception of the default value for register 0x55 in the environment controller space: Looks like this was just documented wrong. The dumped value of 0x50 also makes more sense. Change-Id: I2bd23d30b7158b2e05fcee7c6280df82570d1401 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17004 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-10-31superiotool: Add an alternative dump formatNico Huber
Add new dump format to superiotool that prints each register on a separate line. This should be more suitable for diff'ing dumps of multiple superiotool runs. Change-Id: I226ee82b903bf77e760d3396d02fa50688adb9f2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17003 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-10-31ec/acpi: Add missing includeNico Huber
Change-Id: I61c2191f28b6c2c9a6bc587dc3b6c2ae28205192 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17124 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-10-31lib/prog_loaders: use common ramstage_cache_invalid()Aaron Durbin
All current implementations of ramstage_cache_invalid() were just resetting the system based on the RESET_ON_INVALID_RAMSTAGE_CACHE Kconfig option. Move that behavior to a single implementation within prog_loaders.c which removes duplication. Change-Id: I67aae73f9e1305732f90d947fe57c5aaf66ada9e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17184 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-10-31lib/program.ld: add .sdata sectionsAaron Durbin
Ron reported some toolchain emitting .sdata sections. Let's ensure we catch objects in those sections instead of getting dropped on the floor for architectures which emit those sections. Change-Id: I0680228f8424f99611914ef5fc31adf5d3891eee Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17180 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-29Set up 3rdparty/libgfxinitNico Huber
`libgfxinit` is a SPARK library for graphics modesetting. It supports Intel integrated graphics only, strictly speaking, the Core i processor line. Change-Id: Idf4b0e5fbf37a5d974075b2e44d1fa16dc428da3 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/16949 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-10-29Set up 3rdparty/libhwbaseNico Huber
`libhwbase` is a SPARK library that contains some basic support for i/o access, debugging, timers. Just what I put around `libgfxinit`, to make it build standalone. Change-Id: I1918680c14696215522e1c5dae072235bb4e71a3 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/16948 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-10-29Makefile: Allow inclusion of source files from 3rdparty/Nico Huber
Change-Id: I81c6f628f239223ba293a1196f70e4f26e022f6c Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/16950 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-29gnat.adc: Do not generate assertion code for Refined_PostNico Huber
Ada usually does lots of type and contract checking during runtime. As this produces overhead and there is nobody to tell when we run into an exception, we disable code generation for those checks. Now disable it for `Refined_Post` too, which was just missed earlier. Change-Id: I67ca754f830e387efee3930e86929eb494bfaf03 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/16945 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-29Add option to build Ada debugging codeNico Huber
Ada knows a pragma `Debug` that is used to exclude procedure calls from a release build. The new option `DEBUG_ADA_CODE` enables those procedure calls. Change-Id: Id5298e5819606c3d1cf2a2a1cd4f1d5d1227aa4f Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/16943 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-29nb/intel/sandybridge/gma: Always initialize DP buffer translationNico Huber
These settings should be always made by the firmware, no matter if we set up graphics or not. It looks like Linux doesn't even know these registers. The values are taken from the PRMs for Sandy Bridge and Ivy Bridge [1, 2]. They match the settings that were done in the native graphics path for Ivy Bridge. I expect the differences to be an update (i.e. the set- tings we did on the Sandy Bridge path were just outdated). Also, these settings affect the PCH and not the CPU which are independent from each other. [1] Intel® OpenSource HD Graphics Programmer’s Reference Manual (PRM) Volume 3 Part 3: PCH Display Registers (SandyBridge) Doc Ref #: IHD-OS-V3 Pt3 – 05 11 https://01.org/sites/default/files/documentation/snb_ihd_os_vol3_part3.pdf [2] Intel ® OpenSource HD Graphics Programmer’s Reference Manual (PRM) Volume 3 Part 4: South Display Engine Registers (Ivy Bridge) Doc Ref #: IHD-OS-V3 Pt 4 – 05 12 https://01.org/sites/default/files/documentation/ivb_ihd_os_vol3_part4.pdf Change-Id: I83cc90c7558b93273a727f332fb0d8ced47ed70e Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17073 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-29chromeec: Update Chrome EC submoduleDuncan Laurie
Update to Chromium TOT with ea1a8699e96425806abdd532d04da254ae093f6e Change-Id: I28b9f415a4d55442c294abd27c344a91608a06c0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17185 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-10-29soc/intel/common: Add reset.c to postcarFurquan Shaikh
ramstage_cache_invalid which was added in I83fe76957c061f20e9afb308e55923806fda4f93 (review.coreboot.org/#/c/17112) requires hard_reset to be defined in postcar stage. BUG=None BRANCH=None TEST=Compiles successfully for reef. Change-Id: I283277c373259e0e2dfe72e3c889ceea012544f2 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17182 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-10-29Documentation: Add documentation for GPIO toggling in ACPI AMLFurquan Shaikh
This document provides information about the different functions that a driver can use for generating ACPI code for toggling GPIO. These functions are expected to be implemented by the SoC. It also defines the different constraints on use of Local variables in ACPI code while implementing these functions. BUG=chrome-os-partner:55988 Change-Id: Ibc03d766afb6d7b75bc0dc9f79920b561f1c4a78 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17128 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-29nb/intel/i945/gma.c: Homogenize code for PCI IDs.Elyes HAOUAS
Change-Id: Ic01565cb730c49a5fe77c8f4990276970964f101 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17174 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2016-10-28riscv: add the lowrisc/nexys4ddr mainboardRonald G. Minnich
This was tested at the coreboot meeting in Berlin. The uart programming may still not be right but when used with the lowrisc bitstream for the board we were able to load and start linux, although it does not yet get far due to PTE version issues with lowrisc. Change-Id: Ia1de1a92762631c9d7bb3d41b04f95296144caa3 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17132 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-10-28lars/kunimitsu: Add other sensor in _ART for fan controlSumeet Pawnikar
This patch updates the _ART table with other external sensor TSR0 for Fan speed control on Skylake-U based Kunimitsu and Lars boards. Also, updates the temperature values in DPTF policy for better performance. BUG=chrome-os-partner:51025 BRANCH=firmware-glados-7820.B TEST=Built and booted on kunimitsu and lars EVT boards. Verified this updated _ART table on these boards with different workloads. Change-Id: Ib195910c5eb00e004e8b9bd50e266ade3c175be2 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://chromium-review.googlesource.com/332349 Reviewed-on: https://review.coreboot.org/17066 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-28Makefile.inc: Explicitly disable PIEPaul Menzel
Some distribution compilers enable Position Independent Executable (PIE) by default, causing a build failure. So explicitly disable PIE by passing the flag `-fno-pie`, to fix the build error. Change-Id: I1b7d7168e34c5c93c25bc03ffa49b2eeac0e76f8 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/17097 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-28util/xcompile/xcompile: Add a space before `&&`Paul Menzel
Change-Id: I07fd4d6f6db220e23da8daced6014ce39894c604 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/17159 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-10-28mainboard/google/reef: allow variants to override NHLT OEM stringsAaron Durbin
In certain cases a board variant may need to override the NHLT OEM strings in the main NHLT table. Therefore, provide that path. BUG=chrome-os-partner:56918 Change-Id: I57cc4fd3665698e41ceebb1949180f86bb60b61f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17167 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
2016-10-28mainboard/google/reef: update comment for DMIC config usageAaron Durbin
Going forward GPIO_17 is used to determine the configuration of the board w.r.t. the number of DMICs on the board. BUG=chrome-os-partner:56918 Change-Id: I03edb880e0649977030c1b87219ebebac631a519 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17163 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-28soc/intel/skylake: don't hardcode GPE0 standard regAaron Durbin
While using '3' is fine for the standard gpe0 for skylake, I want to make sure anyone that copies this code doesn't tweak GPE0_REG_MAX without the hard coded index. If that does happen now things will still work, but it may just not match the hardware proper. BUG=chrome-os-partner:58666 Change-Id: I434b9a765a0a2f263490bb2b4ecb3635292d46c9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17160 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-10-28chromeec: Update submoduleDuncan Laurie
Update the chromeec submodule to current Chromium TOT. Change-Id: Ia3d913703fdea0ece02074d8e2d4b30d97e9a97c Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17179 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-28skylake: Add GPIO macro for configuring inverted APIC inputDuncan Laurie
Add a GPIO macro that allows a pin to be routed to the APIC with the input inverted. This allows a normal interrupt to get used as a GPE during firmware and still be used as a perhiperal interrupt in the kernel. BUG=chrome-os-partner:58666 TEST=boot en eve and use TPM IRQ in firmware and OS Change-Id: I77f727f749fdd5281ff595a9237fe1e634daba96 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17176 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-28soc/intel/skylake: put back uart_debug.c into verstageAaron Durbin
uart_debug.c was accidentally dropped in verstage in 64ce1d122c0464a4ef138fb7452a91b408b1a7c2 (https://review.coreboot.org/17136). Fix that. Change-Id: If37a028550d419bada80d157c4de02fd82d26c89 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17175 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-10-28pcengines/apu1: Add RS485 configurationKyösti Mälkki
In RS485 mode RTS line acts as a transceiver direction control. The datasheet is not very clear about the polarity but register setting here is tested to drive nRTS line high when transmitting. Also note revision of B of the super-IO has errata and 8N1 setting does not work properly, you would need revision C of the chip assembled to fix this. Change-Id: I705fe0c5a5f8369b0a9358a64c74500238b5c4ba Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14998 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-10-27util/lint/lint: Show lint script output as it's runningMartin Roth
The checkpatch script takes a really long time to run, and when the output is buffered to wait until it's finished, it's hard to tell if the script is actually doing anything. Instead, use tee to log the output and display it at the same time. Change-Id: I3cf36e5e6ca28584103888ee1c6f125320ac068a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17125 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-10-27Do not select SEABIOS_VGA_COREBOOT by default when building for QEMUArthur Heymans
On QEMU using SeaVGABIOS breaks some bootloaders, e.g. ISOLINUX does not work and GRUB works but is forced in txtmode, instead of graphical mode. Change-Id: If31d4e5ed19cbeed3f8f9dbc23cc738dd55986e5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17122 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-27soc/intel/skylake: make inline function staticNaresh G Solanki
Make bootblock_fsp_temp_ram_init as static inline. Change-Id: Iacf24728a45fc6554d7a425feecc25e55ac5da6c Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17084 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-27driver/intel/fsp2_0: Reset on invalid stage cache.Naresh G Solanki
Add config in fsp 2.0/1.1 driver to reset if ramstage stage cache is invalid during S3 resume. Change-Id: I83fe76957c061f20e9afb308e55923806fda4f93 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17112 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-10-27mainboard/google/reef: drop disabling periodic training for micronAaron Durbin
In anticipation of getting fixed material remove the disabling of periodic training for MT53B512M32D2NP and MT53B256M32D1NP. BUG=chrome-os-partner:59003 Change-Id: Iaadaa979d85cab78dda527db7480420af02fd832 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17130 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-27mainboard/google/reef: clarify memory part number detailsAaron Durbin
Explain the reasoning for the part_num strings used in the memory SKU table explaining the necessity of keeping mosys in sync with the strings used. It's possible that actual part numbers could change as the higher speed material gets cheaper, for example. BUG=chrome-os-partner:58966 Change-Id: If895e52791dc56e283261b3438106116b8b2ea05 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17129 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-10-27skylake: Add support for eSPI SMI eventsDuncan Laurie
Add the necessary infrastructure to support eSPI SMI events, and a mainboard handler to pass control to the EC. BUG=chrome-os-partner:58666 TEST=tested on eve board with eSPI enabled, verified that lid close event from the EC during firmware will result in an SMI and shut down the system. Change-Id: I6367e233e070a8fca053a7bdd2534c0578d15d12 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17134 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-10-27skylake: Prepare GPE for use in bootblockDuncan Laurie
Export the pmc_gpe_init() function from pmc.c to pmutil.c so it can be used in bootblock, and then call it from there to initialize any GPEs for use in firmware. BUG=chrome-os-partner:58666 TEST=test working GPE as TPM interrupt on skylake board Change-Id: I6b4f7d0aa689db42dc455075f84ab5694e8c9661 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17135 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-27skylake: Support for early I2C TPM driverDuncan Laurie
Add the SOC definition for acpi_get_gpe() so it can be used by the I2C TPM driver. Also add the I2C support code to verstage so it can get used by vboot. BUG=chrome-os-partner:58666 TEST=boot with I2C TPM on skylake board Change-Id: I553f00a6ec25955ecc18a7616d9c3e1e7cbbb8ca Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17136 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-10-27skylake: Fix wake source reporting with Deep S3Duncan Laurie
The Deep S3 state will lose a lot of register contents that we used to rely on for determining wake source. In order to make use of this override the enable bit for wake sources that are enabled for Deep S3 in devicetree.cb. BUG=chrome-os-partner:58666 TEST=check for _SWS reporting wake source on S3 resume on skylake Change-Id: If5113d6890f6cbecc32f92af67a29952266fe0ac Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17137 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-10-27skylake: Use COMMON_FADTDuncan Laurie
Remove the FADT from the individual mainboards and select and use COMMON_FADT in the SOC instead. Set the ACPI revision to 5. Change-Id: Ieb87c467c71bc125f80c7d941486c2fbc9cd4020 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17138 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-10-27FILO: update STABLEKevin Paul Herbert
The STABLE build of FILO does not build anymore with the current HEAD of coreboot. However, the current HEAD of FILO does build with the current HEAD of coreboot. Update FILO STABLE to FILO HEAD. Change-Id: I4eece3aaada0dfdf4da106d5d260b5b361537558 Signed-off-by: Kevin Paul Herbert <kph@platinasystems.com> Reviewed-on: https://review.coreboot.org/15195 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-27payload choice: Fix build of FILOKyösti Mälkki
Actual build was missing libpayload path. Change-Id: I519869d2d64c66b3d1d557595c7d13c22cd40819 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17114 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-26google/reef/variants/pyro: Use WCOM Touchscreen driverFurquan Shaikh
BUG=chrome-os-partner:57846 Change-Id: Ibd3ef8cebcf99ee2186dfed98b04373dd17e798e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17093 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2016-10-26drivers/i2c/wacom_ts: Add support for WCOM touchscreen device driverFurquan Shaikh
BUG=chrome-os-partner:57846 Change-Id: Id6bd91b3fd6420994ad5811d362618b1a38a8afa Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17092 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-10-26nb/x4x/gma.c: Remove writes to DP, FDI registersArthur Heymans
Those registers are only used on more recent Intel platforms featuring a PCH. The DP registers on G4X hardware are at a different offset. Change-Id: I4660e547426ccec0b2095d897e4a8c86e0acf41e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17111 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-26nb/gm45/gma.c: Remove writes to DP, FDI registersArthur Heymans
Those registers are only used on more recent Intel platforms featuring a PCH. The DP registers on G4X hardware are at a different offset. Change-Id: Ib49e54d4e7d6595dc09fb1be35ac8178b80c7f71 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17110 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-26nb/intel/i945: Add PCI id for I945GCNico Huber
Also drop an odd comment about the resource allocator which seems to work fine, with the right id. Change-Id: I9099211fe946c28f90dd7730345b81a3f7f6f545 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/17095 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-26intel/skylake: Add support to enable wake-on-usb attach/detachFurquan Shaikh
Three things are required to enable wake-on-usb: 1. 5V to USB ports should be enabled in S3. 2. ASL file needs to have appropriate wake bit set. 3. XHCI controller should have the wake on attach/detach bit set for the corresponding port in PORTSCN register. Only part missing was #3. This CL adds support to allow mainboard to define a bitmap in devicetree corresponding to the ports that it wants to enable wake-on-usb feature. Based on the bitmap, wake on attach/detach bits in PORTSCN would be set by xhci.asl for the appropriate ports. BUG=chrome-os-partner:58734 BRANCH=None TEST=Verified that with port 5 enabled, chell wakes up from S3 on usb attach/detach. Change-Id: I40a22a450e52f74a0ab93ebb8170555d834ebdaf Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17056 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-26soc/intel/apollolake: Enable write-protect SPI flash range supportFurquan Shaikh
Use intel common infrastructure to enable support for write-protecting SPI flash range. Also, enable this protection for RW_MRC_CACHE. BUG=chrome-os-partner:58896 TEST=Verified that write to RW_MRC_CACHE fails in OS using "flashrom -p host -i RW_MRC_CACHE -w /tmp/test.bin" Change-Id: I35df12bc295d141e314ec2cb092d904842432394 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17117 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-10-26soc/intel/skylake: Use intel common support to write-protect SPI flashFurquan Shaikh
BUG=chrome-os-partner:58896 Change-Id: I281c799a1798f3353d78edd8a6cd16bbe762bc2c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17116 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-26soc/intel/common: Enable support to write protect SPI flash rangeFurquan Shaikh
Write-protect SPI flash range provided by caller by using a free Flash Protected Range (FPR) register. This expects SoC to define a callback for providing information about the first FPR register address and maximum number of FPRs supported. BUG=chrome-os-partner:58896 Change-Id: I4e34ede8784e5587a5e08ffa10e20d2d14e20add Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17115 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-10-25riscv: add the lowrisc System On Chip supportRonald G. Minnich
Change-Id: I8d81b9cf280e724c935106c8f00692300094ad3f Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17119 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2016-10-25mb/ga-g41m-es2l: remove unneeded IGD IRQ setting in ACPIArthur Heymans
According to: "Intel ® 4 Series Chipset Family datasheet" the IGD only has 1 IRQ pin. Change-Id: I974f002f5a213056f4593a1eab10772527bb241d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17098 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-25nb/i945/gma.c: Set the MSAC register correctlyArthur Heymans
This fixes an instability on 945gc where the IGD completely locks up the system, when for instance tasked to do something with compositing (like GNOME or GDM). TESTED on ga-945gcm-s2l and d945gclf TEST: launch GDM (gnome display manager) Change-Id: Iec49bccf3e3164df9dc1e0b54460a616fe92e04d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17094 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2016-10-25mainboard/intel/kblrvp: Initial commit for Intel Kaby Lake RVP3Naresh G Solanki
Add support for Kaby Lake RVP3. Use kunimitsu at commit 028200f as base. Kabylake RVP3 is based on Kabylake-Y with onboard Dual Channel LPDDR3 DIMM. * Update board name to kblrvp * Remove fsp 1.1 specific code( As Kabylake uses fsp2.0) * Remove board id function. * Remove unused spd & add rvp3 spd file. This is an initial commit does not have full support to boot. Will add more CLs to boot Chrome OS with depthcharge. Change-Id: Id8e32c5b93fc32ba84278c5c5da8f8e30c201bea Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17032 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 05:54:09 +0000