| Age | Commit message (Collapse) | Author |
|---|
|
The read and write routines take a number of bytes to write, which
should be 1,2, or 4. We now return an error if an invalid size
is specified.
Change-Id: I93344bc0837c3715fc7660503f405c8878eb711c
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12936
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
I tried to handle the checking for the config flag internal to xcompile,
but the config flags don't appear to have been loaded into the
environment by make at that point.
This does update the if to check if the flag is even set before putting
anything into .xcompile though. If the LDFLAG isn't set, there's no
point in appending anything.
Also removes the LP version of the erratum config flag, which was a
copy/paste mistake from $(CONFIG_LP_COMPILER_GCC).
Change-Id: I3d8b0328c85310393a120741a498bc18867a6f54
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12858
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Values are taken from the vendor BIOS of my X200s. Notable effect:
Stops display from flashing during native graphics init / Linux mode
setting.
Change-Id: Ie5d9efc010a78dd46317b6bbdb7bfacc2c9d2cbf
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/12886
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Register settings are the same as on newer chips (compare sandy-
bridge), just at different locations.
Change-Id: Iea0359165074298a376e0e2ca8f37f71b83ac335
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/12885
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Skip everything but the final setting of PP_CONTROL, i.e. triggering
the power up. The settings with PANEL_UNLOCK_REGS are useless as no
lockable registers were touched in between. Also the loop waiting for
the panel power up to finish was a no-op as the registers with the
power timings were never filled (see follow-up commits).
Change-Id: Ife27dcafdf197b2246c4e69f2bf7a3a6765d1d82
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/12884
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Instead of looking for an FMAP at every byte, only search down
to a granularity of 16 bytes, reducing the time for a cbfstool
call by 0.3s when no FMAP is found.
Signed-off-by: Stefan Reinauner <reinauer@chromium.org>
BUG=none
BRANCH=none
TEST=time ./cbfstool coreboot.rom add -f locale_de.bin -n locale_de.bin -t 0x50 -c lzma
is 0.3s faster than before.
Change-Id: Icb4937330e920ae09928ceda7c1af6a3c5130ac7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bc92d838ba9db7733870ea6e8423fa4fa41bf8fe
Original-Change-Id: Idbaec58a199df93bdc10e883c56675b419ab5b8e
Original-Reviewed-on: https://chromium-review.googlesource.com/317321
Original-Commit-Ready: Stefan Reinauer <reinauer@chromium.org>
Original-Tested-by: Stefan Reinauer <reinauer@chromium.org>
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/12932
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
cbgfx_init can fail for multiple reasons. These codes help debugging
cbgfx_init.
BUG=chromium:502066
BRANCH=tot
TEST=Tested on Glados
Change-Id: Ifaa8d91b058bd838a53faf5d803c0337cb1e082c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4caf2496f3583e133f3f216ec401515c267e6e7b
Original-Change-Id: I84f60dd961db47fa426442172ab19676253b9495
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/315550
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12930
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
In some occasions, Coreboot may need to include the header file from
3rdparty directory. By adding 3rdparty directory to Coreboot include
path, we can include 3rdparty header file directly.
BRANCH=none
BUG=none
TEST=build pass
Change-Id: I8ed68bd330eae1211736a91b213c5dc0af2f7fa9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d6a86b3488ebbc9d8f5f46e922106b71034e7127
Original-Change-Id: Ib8e9f059f88a8c6767f872af8760e91186ae5ec3
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/315021
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12929
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
In parse_elf_to_stage(), it uses 32-bit variable to handle address.
The correct address type is Elf64_Addr. Use uint64_t to prevent address
to be truncated.
BUG=none
TEST=emerge-oak coreboot
BRANCH=none
Change-Id: I1abcd16899a69b18dd10e9678e767b0564b2846e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ebc1aae0ae4ca30802a80a4a4e2ae0c0dad4d88a
Original-Change-Id: I21f8057ddf13e442f1cf55da6702c3449ba0cc35
Original-Reviewed-on: https://chromium-review.googlesource.com/292553
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12927
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The century byte is used by most RTC (default 0x32@nvram).
Even the century byte can disabled via ACPI it's more safe to reserve
it's space. Because some RTC will act with that byte anyhow.
Some OS overwrite it when syncronize the RTC.
Change-Id: I078c0c57215ccb925afa85b9d067f15268801ec9
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/11853
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
hashcbfs was spliced in a line early, mixing up 'extract' and 'cbfshash'
help texts.
Change-Id: I86d4edb9eec0685a290b2dd4c2dc45d3611eba9a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12922
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
These were all written as part of the coreboot project, so get
the standard coreboot license header.
Change-Id: I4fccc8055755816be64e9e1a185f1e6fcb2b89ae
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12911
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
These were all written as part of the coreboot project, so get
the standard coreboot license header.
Change-Id: I74438e8032c84f4190ef49f306969f7157234001
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12910
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The license text that we decided to remove was removed from the headers
of these files, but was still left in the help text. Remove it from
those locations as well.
Change-Id: I0e1b3b79f1afa35e632c4a4dd09a8bf2b02eaa6d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12913
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This continues what was done in commit a73b93157f2
(tree: drop last paragraph of GPL copyright header)
Change-Id: Ifb8d2d13f7787657445817bdde8dc15df375e173
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12914
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Because these platforms haven't been getting build testing, they've
missed out on some of the improvements that the other platforms have
gotten.
Enable MAINBOARD_HAS_LPC_TPM so that they will build.
Change-Id: I5e44135b6dfa800fa14e5b08c3e3e5921d50b082
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12865
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Remove redundant call to dram_mrscommands().
Change-Id: I157915b4432093c556b538433e3337db1e9c525f
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/12891
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Ifa7dd593f70921a99d937104960e26100de28089
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/12421
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
- Don't redefine D0F0_PCIEXBAR_LO, use the #define in x4x.h
- Move TPMBASE and TPM32() definitions into iomap.h
- Use "" style include for x4x.h in nortbridge files.
- Move includes of .h files out of x4x.h and into the c files that need
them.
- Protect function definitions in bootblock.
Change-Id: I3fdb579235c5446733a0ffba05fffe1a73381251
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12849
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Remove duplicate line which sets baseaddress parameter.
Change-Id: Idfbb0297e413344be892fa1ecc676a64d20352bf
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/12904
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The lint target in the makefile relies there being a script using
this particular naming format, so add a shell script front end to
run the kconfig linter.
Change-Id: I029c1cd3bbf3837c9f1d86c391ae5cabfa53685d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12903
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I7f04156fff0b65ea262b12961ce76ef329d358ab
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12902
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Checkpatch should be 007.
Change-Id: Ib71c50ad1a63a3a743391cd8fea9f79cd08ef6f3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12901
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This is an initial check for the coreboot toolchain versions. It
currently checks binutils, gcc, clang, and iasl. The other components
are slightly more difficult to test, but should follow on shortly.
If the toolchain is not the correct version, make will halt with
an error.
Change-Id: I41daf6c4545c01dc21231d78fd081bbcf77c4726
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12846
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ieae41cab97293831a0c49c3b472b9e6c62ba36c6
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12899
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This method of reporting has been removed from the current Skylake
ME binaries so is no longer needed.
Change-Id: I774982146c19f37418f5aee29ae8883fcd3d0c8c
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12854
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Migrate google/guado (Asus Chromebox CN62) from Chromium tree to upstream,
using google/auron and google/panther as refs.
TEST=built and booted guado with full functionality
Change-Id: If7a500fb408197a61c9619b9d5ea1458d1f4d702
Tested-by: Matt DeVillier <matt.devillier@gmail.com>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/12800
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Correct wrong spelled "subnit" in help message.
Change-Id: Iadbf483835ee4c1b6e3faa454d1cae2660b99c5e
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/12905
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ifae3822b6c28832f6aa05a4ffd8f02067a923f2c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/12883
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I04abdd48f5e2440756f9b03041d46c773f200368
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/12890
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
There's nothing in these files that needs to be hidden if
GOP support is disabled. Removing this allows skylake to
build when GOP support is turned off.
Change-Id: I2a4f47cd435f48668311719f388b502ae77eca99
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12859
Tested-by: build bot (Jenkins)
Reviewed-by: York Yang <york.yang@intel.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Since only X220 with i7 have the USB3 controller this was
probably overlooked.
Before this patch lspci on Linux would not show the NEC USB 3 controller
as well as the PCI bridge it is behind. After, both the bridge and the
NEC controller can be found in the output:
05:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller
(rev 04)
Change-Id: I5e7e3f0c7d023f6206a7bec42a39f8955a3d9331
Signed-off-by: Marian Tietz <mtcoreboot@gmail.com>
Reviewed-on: https://review.coreboot.org/12882
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Instead of printing out a single tool that needs to be installed
each time buildgcc is run, print out the entire list of tools
to be installed, then halt.
Change-Id: I7761760eef3c45ba371f882a4f987408945bb3e5
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12856
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
I think this has a fairly low likelyhood of happening, but if AGESA
can't determine the voltage of the memory, it assignes a value of 255
to the variable that it later uses to read from an 3-value array. There
is an assert, but that doesn't halt AGESA, so it would use some random
value. If the voltage can't be determined, fall back to 1.5v as the
default value.
Fixes coverity warning 1294803 - Out-of-bounds read
Change-Id: Ib9e568175edbdf55a7a4c35055da7169ea7f2ede
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12855
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This just tells the OS that it can use the 16GB of address space
at the 48GB mark for PCI. This is the upper 16GB of Bay Trail's 36 bit
physical address space.
This could be hardcoded into the UMEM definition, but doing it this way
makes it more plain what it's doing, and allows for modification
to put it just above the top of upper memory, similar to what is done
with the standard PCI region above the top of low memory.
Change-Id: Id6208c3712e5d94d62a83c4ac69e8ffd0e19f4ad
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12791
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: York Yang <york.yang@intel.com>
|
|
The Braswell IFD & ME blobs aren't published in the 3rdparty repo, so
disable them by default for now.
Change-Id: If68ff1f37fbf7afb2f9eb1e5d9942afcf40ab1e3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12828
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Make sure the latest & greatest Intel targets actually
build in our build system.
Change-Id: I479ad473c260fc914d224cb58f4be1837aff2502
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12463
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Previously, when we tested for g++ and two different versions of clang,
if the earlier versions were not found, buildgcc would still request
that they be installed. This obviously isn't needed, and isn't the
desired outcome.
Now, if one of the first tests fails, nothing gets printed. If all
the tests fail, it tells you to install either g++ or clang.
Change-Id: I71359f59c4c6bee3c3c55e4e6105f11e6ca51527
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12852
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
- occured -> occurred
- accomodate -> accommodate
- existant -> existent
- asssertion -> assertion
- manangement -> management
- cotroller -> controller
Change-Id: Ibd6663752466d691fabbdc216ea05f2b58ac12d1
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12850
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I7576591b42fa62da2b3bd74f961fb297b85e250d
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/4806
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This has been broken out from http://review.coreboot.org/#/c/10581/
Change-Id: Ia6153115ff75e21657fa8c244c9eb993d0d63772
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: https://review.coreboot.org/11025
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ic3df9bf7d7f3c4c39789f3f496bcb7fc2ee50931
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12827
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Quoting variables prevents word splitting and glob expansion, and
prevents the script from breaking when input contains spaces, line
feeds, glob characters and such.
See shellcheck warning SC2086
Change-Id: Ib6ca46b64a621c4bea5c33ac312f2824b0386235
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12845
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Using the local variables instead of positional parameters helps
readability.
- Add and use the local variables in testcc.
- Use the existing local variables in testld.
Change-Id: Ice13288b830a7aa043b360eaee8e36f060589a18
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12844
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
While the backtick syntax isn't actually deprecated, the $() syntax
is preferred. Since both styles were being used in this script, settle
on the new standard for all cases.
Change-Id: I33770d666781b4fa34c909411e0d220c2540dbb4
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12843
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Clean up the output file a bit by only including the erratum
for arm64 into the that architecture section instead of
every architecture.
Change-Id: Ib6276f12aee5deb92a03e1c4fa2ad57db46bdc8f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12842
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In order to be able to check the compiler versions, we need to be
able to access the compiler variables. Move the original assignments
outside of the GCC check, and assign either the GCC or CLANG compiler
to the actual CC_ environment variable later. This ends up with the
same value set, while allowing the compiler versions to be checked.
Change-Id: Iffad02d526420ebbdfb15ed45eb51187caaa94fb
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12841
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
We already have a CFLAGS variable - Use it for all of the flags.
Change-Id: I22b4c5cf24b8743e85ffab29ddcccdc6c732ea3b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12840
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The XGCCPATH prefix is on all the other tools and compilers,
so add it to clang as well, so it can be found correctly.
Change-Id: Ibc250a81433f37bbb0555d32605aebe3a68aaf40
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12839
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
- Add bar at the top of each architecture
- Make the architecture name and the TARCH_SEARCH to two lines
- Add a second line at the bottom of each architecture
- Add a comment about the two blank lines so they don't get
accidentally removed.
Change-Id: Ib4326bd94fe39b979244816ce54b752d083f6b16
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12838
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I96a5048050f8016c3c569f20318b4d421a4470a7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12837
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The dsdt file moved from the mainboard directory to the top level of
the build directory. Remove it from the new location when cleaning.
Change-Id: If9f72c78e5c03e0db384b3181c169aa2ecbb5c18
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12822
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Since the GOP drivers aren't published in the 3rdparty blobs repo yet,
disable the GOP support for now so that abuild can build these
platforms.
Change-Id: Ic98671c163b433ebde89c8bf240ef4b2be393586
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12829
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I93687efc5405359286d3197f0e59ec3b118c5100
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12809
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
When microcode updates are enabled, this fixes an issue identical
to that described in GIT hash 7b22d84d:
* drivers/pc80: Add optional spinlock for nvram CBFS access
Change-Id: Ib7e8cb171f44833167053ca98a85cca23021dfba
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12063
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Tested on NetBSD-7.0/i386
Change-Id: I6a693633d3a80ea07ade233b1b4fd1c5a1412032
Signed-off-by: Andrey Korolyov <andrey@xdel.ru>
Reviewed-on: https://review.coreboot.org/12835
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I033044e4b781475d6d60a49a61313a720103ce38
Signed-off-by: Andrey Korolyov <andrey@xdel.ru>
Reviewed-on: https://review.coreboot.org/12836
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This reverts commit 68d0e4a5a1e7028227f6fbe086c891955cb7854e.
Special handling of MPFR is no longer needed with the latest
MPFR release.
Change-Id: I96d9ea92cfb74eed6af2ba62254f0678081e2b4f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12833
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The current MPFR version contains a stale config.guess file
that requires special handling on ppc64el systems. Bump
the MPFR version to the latest release.
Change-Id: I5e86c732c09f8a6a43f9812452124d64d337ea3f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12832
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Tested on C3/EPIA board and Linux x86
Change-Id: I8df551f4b385ee8702af78df00169bdc8e180925
Signed-off-by: Andrey Korolyov <andrey@xdel.ru>
Reviewed-on: https://review.coreboot.org/12851
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The AMD Family 10h/15h processors use a TSC that increments at
the P0 core frequency. Allow coreboot to query the TSC frequency.
Change-Id: I73ead4fd4af18991452d59985b667a54689778cd
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12834
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The cbfs master header's offset and romsize fields are absolute values
within the boot media proper. Therefore, when adding a master header
provide the offset of the CBFS region one is operating on as well as
the absolute end offset (romsize) to match expectations.
Built with and without CBFS_SIZE != ROM_SIZE on x86 and ARM device. Manually
inspected the master headers within the images to confirm proper caclulations.
Change-Id: Id0623fd713ee7a481ce3326f4770c81beda20f64
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12825
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
This reverts commit 65e33c08a9a88c52baaadaf515b9591856115a77.
This was the wrong logic to fix the master header.
Change-Id: I4688034831f09ac69abfd0660c76112deabd62ec
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12824
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The Braswell CPU seems to have two different Video BIOS roms, one for
the C0 revision, and one for other revisions. Build them both into
the coreboot image, and let coreboot sort out which one should be used
at runtime. This should allow one rom to be used for all revisions.
The initial reason for this patch was that the Kconfig symbol
C0_DISP_SUPPORT didn't exist, and was causing issues. This
seems like the best way to eliminate the need for that symbol.
Change-Id: I5b9f225c0daf4e02fda75daf9cd07bb160bf0e0f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12826
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This is more tribal knowledge that I don't think I've seen written down
anywhere else. It's not a huge issue, but when looking through the git
log, it helps to be able to differentiate the information from the old
gerrit with the information from the new one.
Change-Id: I7993bda1e9aab79dc26940aaba9ddc52382ed0df
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12804
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
For the purposes of maintaining integrity of a CBFS allow one to
hash a CBFS over a given region. The hash consists of all file
metadata and non-empty file data. The resulting digest is saved
to the requested destination region.
BUG=chrome-os-partner:48412
BUG=chromium:445938
BRANCH=None
TEST=Integrated with glados chrome os build. vboot verification
works using the same code to generate the hash in the tooling
as well as at runtime on the board in question.
Change-Id: Ib0d6bf668ffd6618f5f73e1217bdef404074dbfc
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12790
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Adding new files overwrote the header with the empty file (ie 0xff),
so carve out some space.
BUG=chromium:445938
BRANCH=none
TEST=none
Change-Id: I91c292df381c2bac41c6cb9dda74dae99defd81d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/12789
Tested-by: build bot (Jenkins)
|
|
These need to go together, so the commit became a bit larger than
typial.
- Add an option -R for the copy source fmap region.
Use: cbfstool copy -r target-region -R source-region.
- Don't generate a CBFS master header because for fmap regions, we
assume that the region starts with a file header.
Use cbfstool add-master-header to add it afterwards, if necessary.
- Don't copy files of type "cbfs master header" (which are what cbfstool
add-master-header creates)
- Leave room for the master header pointer
- Remove -D command line option as it's no longer used.
BUG=chromium:445938
BRANCH=none
TEST=Manual test on image and integration test w/ bundle_firmware
changes.
CQ-DEPEND=CL:313770,CL:313771
Change-Id: I2a11cda42caee96aa763f162b5f3bc11bb7992f9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12788
Tested-by: build bot (Jenkins)
|
|
This allows adding support for FMAP based cbfstool copy more easily.
BUG=chromium:445938
Change-Id: I72e7bc4da7d27853e324400f76f86136e3d8726e
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/12787
Tested-by: build bot (Jenkins)
|
|
Provide a common routine to hash the contents of a cbfs
region. The cbfs region is hashed in the following order:
1. potential cbfs header at offset 0
2. potential cbfs header retlative offset at cbfs size - 4
3. For each file the metadata of the file.
4. For each non-empty file the data of the file.
BUG=chrome-os-partner:48412
BUG=chromium:445938
BRANCH=None
TEST=Utilized in chromeos cros_bundle_firmware as well as at
runtime during vboot verification on glados.
Change-Id: Ie1e5db5b8a80d9465e88d3f69f5367d887bdf73f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12786
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
We will soon need to handle empty files.
Change-Id: Ia72a4bff7d9bb36f6a6648c3dd89e86593d80761
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/12785
Tested-by: build bot (Jenkins)
|
|
Some of the files need to be adjusted so that they can be used
both in cbfstool as well as coreboot proper. For coreboot,
add a <sys/types.h> file such that proper types can be included
from both the tools and coreboot. The other chanes are to accomodate
stricter checking in cbfstool.
BUG=chrome-os-partner:48412
BUG=chromium:445938
BRANCH=None
TEST=Built on glados including tools. Booted.
Change-Id: I771c6675c64b8837f775427721dd3300a8fa1bc0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12784
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
To continue sharing more code between the tools and
coreboot proper provide cbfs parsing logic in commonlib.
A cbfs_for_each_file() function was added to allow
one to act on each file found within a cbfs. cbfs_locate()
was updated to use that logic.
BUG=chrome-os-partner:48412
BUG=chromium:445938
BRANCH=None
TEST=Utilized and booted on glados.
Change-Id: I1f23841583e78dc3686f106de9eafe1adbef8c9f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12783
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Provide a helper function which returns the relative offset
between 2 region_devices that have a parent-child child relationship.
BUG=chrome-os-partner:48412
BUG=chromium:445938
BRANCH=None
TEST=Utilized and booted on glados.
Change-Id: Ie0041b33e73a6601748f1289e98b6f1f8756eb11
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12782
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Even when ANY_TOOLCHAIN is selected, a valid compiler for the requested
architecture is needed.
Change-Id: If1a0a1ca6b726e8e58d29c69de93546510582548
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12681
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Let toolchain.inc error out when the architecture or tool is missing.
Change-Id: I39a51e5a2c778d6bbc50354807e5e2b717fa9e52
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12682
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I619f7c3cef7f0aaa6fccb3d52f2ac1f6ace6d0d6
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12818
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The config.guess file included with MPFR is completely obsolete,
leading to build failures on ppc64el due to the system architecture
not being detected. Regenerate the files from the host system via
automake before attempting to build MPFR.
Change-Id: I00fc16003906e373d112c25978197ac907adccfd
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12816
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The previous official GMP release (6.0.0) contains a bug that
prevents compilation on ppc64el systems. Increase version
to the latest version (6.1.0).
Bug details:
gcc build on ppc64el fails with:
(.text+0x4c): undefined reference to `BMOD_1_TO_MOD_1_THRESHOLD'
While I don't have an exact commit hash due to Hg use upstream,
a missing BMOD_1_TO_MOD_1_THRESHOLD define on ppc64el was quietly
fixed in Hg before the 6.1.0 release.
Change-Id: I1c05a1c194141db5f8522148c2e20e7558d34714
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12811
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The code committed in GIT hash
* 1eaaa0 southbridge/amd/sr5650:Add MCFG ACPI table support
did not correctly locate the CPU MMCONFIG resource, leading to failures
with operating systems and firmware (e.g. SeaBIOS) when the PCI
extended configuration space option was activated.
Due to the southbridge routing not being set up, MMCONFIG accesses were
targetting DRAM and therefore the PCI devices were not being configured.
The failure normally manifests as a system hang immediately after PCI
configuration starts.
Search for the CPU MMCONFIG resource on all domains below the root
device.
Change-Id: I0df2f825fef2de46563db87af78d0609ab3d8c5a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/12821
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
- Update the help text to be more informative.
- Add todo about IASL - we shouldn't require it if the build doesn't
use it.
Change-Id: Iffeb94f78c1ae7535a8a7b9b0b9f1728301a42b3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12680
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
If ANY_TOOLCHAIN is selected, don't bother telling the user how to
do what they've already done.
Change-Id: I7182d18a91e832aa56638ec64fe8b3b0c38cff7a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12679
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Move the check for NOCOMPILE flag around the whole block. There's
no need to test COMPILERFAIL if NOCOMPILE is set.
Comment the endif lines to make it easier to understand.
Signed-off-by: Martin Roth <martinroth@google.com>
Change-Id: Id7bb5ca13e6bf1cabf4b7b2ff3256b47b966bac1
Reviewed-on: https://review.coreboot.org/12678
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I45ed5e289f9bfae90d71938243f921588b256e39
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12676
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
When coreboot is pulled in as a submodule, the .git "folder" is a file,
not a folder. Use the '-e' test instead of '-d' to allow for that.
Change-Id: I0dd8866b0016f7ba099cdaf4d7db442ff22612b5
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/12819
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This reverts commit d3deecdd9c5c0a8031f2ea9d6c90e0997f123d93.
Do not mix open-source AGESA and binary PI trees. Once you have
working S3 support for binaryPI platforms, add the adapted
oem_s3.c file as northbridge/amd/pi/oem_s3.c instead.
Change-Id: I7c981d0023a5c0225e046f9c0104acfa07436b79
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/12282
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I917b8167a028aa9412b0cc6dedf8f09a1d1fae7f
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/12820
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Make the low-power and small form factor (SFF) options overridable
from romstage main. Also disable both options by default. That's ok
as there aren't yet any in-tree users of the GS45 chipset. As a nice
side-effect, this adds X200s support to the lenovo/x200 port.
Change-Id: I94373851262e6d424cf4885ceca7260c31bc9f61
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/12814
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
All southbridge interrupt pin and routing registers (D*IP and D*IR)
are left at their default values (see ICH9 datasheet) and this file
just has to reflect them.
Change-Id: I687262556d918311757fda9afda9ebfdd7edf947
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/12813
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Original-Signed-off-by: Ted Kuo <tedkuo@ami.com.tw>
Change-Id: I70d7b572e9ae030136a39fb6fa933f486d559aef
Original-Reviewed-on: https://chromium-review.googlesource.com/262832
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Original-Commit-Queue: Ted Kuo <tedkuo@ami.com.tw>
Original-Tested-by: Ted Kuo <tedkuo@ami.com.tw>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/12799
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Set up External Temperature to read via thermal diode/resistor
into TMPINx register by setting thermal_mode switch.
Original-Signed-off-by: Ted Kuo <tedkuo@ami.com.tw>
Change-Id: I0e8621b92faa5c6246e009d2f852c8d4db484034
Original-Reviewed-on: https://chromium-review.googlesource.com/260545
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Original-Tested-by: Ted Kuo <tedkuo@ami.com.tw>
Original-(cherry picked from commit 973e2d393f2595b756f8aa20f6fbe3b6e045621a)
Original-Reviewed-on: https://chromium-review.googlesource.com/262340
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/12798
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The RPU Clock register defaults to on for all clocks.
This is modified to OFF, and the MIPS clock control modified to ON,
by default. This is because the linux kernel will manage the
clocks at all times, but the RPU can only disable clocks if the WIFI
module has been loaded.
Change-Id: I155fb37afd585ca3436a77b97c99ca6e582cbb4f
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: https://review.coreboot.org/12773
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
GRAM is 421056 bytes. The end of the SRAM region (GRAM plays the role
of SRAM) was placed at a 4K aligned address, resulting in a size of
408KB.
Change-Id: I9fa32ab818d600e7447bcac895e4b8c438f2f99d
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: https://review.coreboot.org/12772
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The base address for the I2C dividers (DIV1 and CLOCKOUT)
was erroneously set to the toplevel clock controller base
address and not to the correct peripherals clock controller
base address.
Change-Id: I66bbc1e741bcf6251babee7ddd6376d49d7cb3d1
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: https://review.coreboot.org/12771
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This region must be mapped uncached. This is necesary for an
U-boot payload which will obtain all register base addresses
as physical addresses from the device tree and will use them
as such.
Change-Id: Ib5041df7d90c6ef61b7448a18dd732afbd9489ca
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: https://review.coreboot.org/12770
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
When used with a U-boot payload it will need this region
identity mapped also, so we're defining it in preparation
for that functionality.
Change-Id: I27cee5b58cb899433b52bd06df07b5f2105212af
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: https://review.coreboot.org/12768
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Use SYS PLL in integer mode by default to reduce jitter.
DSMPD_MASK is defined and can be used to switch to fractional mode.
Tested on pistachio bring up board.
Change-Id: Ie6d2aca71c7af86b0993c804329e6d03e26ff754
Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Reviewed-on: https://review.coreboot.org/12767
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Board uses x4x native raminit
Board boots into Debian 8 with full graphics
IRQ9: nobody cared, gets disabled
(PIC needs IRQ settings?)
VGA:
- VGA native init works in grub with analog connector
- Fails to boot with both channels of ram populated
Change-Id: I7417813456817529b8cbaace45cefe47467d0a82
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/11306
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Passes memtest86+ with either one or two sticks of 2GB ram
but memory map needs a hole at 0xa0000000 to 0xc0000000
Change-Id: Ib34d862cb48b49c054a505fffcba1c17aeb39436
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/11307
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Id6d50d4d6af31e43f851645f09383121755291f6
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/12815
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
