Age | Commit message (Expand) | Author |
2008-11-30 | ok, another attempt to the build_opt_tbl problem: | Stefan Reinauer |
2008-11-29 | Copyright update by Jason Wang for freshly written sb600 code. | Jason WangQingpei.wang |
2008-11-28 | Declare special commands to support the Atmel AT25F512A. | Carl-Daniel Hailfinger |
2008-11-28 | If a chip has any TEST_BAD_* flag set, we don't even list the | Carl-Daniel Hailfinger |
2008-11-28 | Add support for the AMD/ATI SB600 southbridge SPI functionality. | Jason Wang |
2008-11-28 | This patch from Ralf Grosse Boerger makes debugging more comfortable. | Stefan Reinauer |
2008-11-28 | This patch fixes the ugly race condition created through build_opt_tbl | Stefan Reinauer |
2008-11-28 | Add SST25VF080B flash chip support. | Jason Wang |
2008-11-28 | Flashrom already has the following probe functions: | Carl-Daniel Hailfinger |
2008-11-27 | The existing check in probe_spi_res() was right for SPI controllers | Carl-Daniel Hailfinger |
2008-11-27 | Remove the unnecessary memctrl[] indirection, 440BX only has one | Uwe Hermann |
2008-11-26 | Increase the qemu rom size (non-LAB) to 512KB so that grub2 fits. | Ward Vandewege |
2008-11-25 | libpayload: Fix immediate rebuild after a clean | Mart Raudsepp |
2008-11-25 | msrtool: Use libpci to let system and target probes find PCI devices. | Peter Stuge |
2008-11-24 | Add support for 32Mbit SPI flash SST25VF032B. Tested on gigabyte m57sli. | Tero O Peippola |
2008-11-24 | [PATCH] libpayload: rename config.h to libpayload-config.h | Jordan Crouse |
2008-11-22 | msrtool: Very small fixes I made after sending out the rc1 tarball. | Peter Stuge |
2008-11-22 | msrtool: Release Candidate 1 | Peter Stuge |
2008-11-21 | i810: Add support for multiple DIMMs, both single-sided and double-sided, | Elia Yehuda |
2008-11-20 | Get rid of the unnecessary indirection by 'struct mem_controller' for the | Uwe Hermann |
2008-11-20 | fix Config-abuild.lb for all targets that need a failover image and | Stefan Reinauer |
2008-11-20 | OK, people, watch this. | Stefan Reinauer |
2008-11-19 | Coding-style and whitespace fixes (also to make the code more similar | Uwe Hermann |
2008-11-19 | Add support for the LiPPERT Cool RoadRunner-LX embedded PC board: | Jens Rottmann |
2008-11-18 | i810: Add some more comments, and especially add a list of tested BUFF_SC | Uwe Hermann |
2008-11-18 | Currently flashrom assumes every vendor BIOS shares our view about which | Carl-Daniel Hailfinger |
2008-11-18 | Check for failed SPI command execution in flashrom. Although SPI itself | Carl-Daniel Hailfinger |
2008-11-18 | Implement read support for the following Atmel chips: | Carl-Daniel Hailfinger |
2008-11-17 | flashrom: SST39VF020 TEST_OK_ PROBE READ ERASE WRITE | Mart Raudsepp |
2008-11-15 | The AT25 and AT26 series SPI chips from Atmel are plain EEPROMs. | Carl-Daniel Hailfinger |
2008-11-14 | Rename LinuxBIOS strings and filenames to coreboot. | Uwe Hermann |
2008-11-14 | drop dead code in sb600 hda | Stefan Reinauer |
2008-11-12 | Add another AM2 cpuid to the name string. Also, colapse the cases for duplica... | Marc Jones |
2008-11-12 | Add detection support for ITE IT8228E, IT8711F, IT8722F, IT8761E, | Uwe Hermann |
2008-11-11 | Signed-off-by: Robert Millan <rmh@aybabtu.com> | Robert Millan |
2008-11-11 | Signed-off-by: Robert Millan <rmh@aybabtu.com> | Robert Millan |
2008-11-11 | Thanks to Uwe Hermann for spotting this typo. | Stefan Reinauer |
2008-11-11 | Add support for the Winbond W83627DHG Super I/O. | Uwe Hermann |
2008-11-11 | [PATCH] coreboot-v2: Add multiboot support | Robert Millan |
2008-11-11 | [PATCH] coreinfo: Add multiboot parsing support | Jordan Crouse |
2008-11-11 | [PATCH] Add sysinfo_have_multiboot function | Jordan Crouse |
2008-11-11 | Always enable serial before SMBus (or as early as possible), as the SMBus | Uwe Hermann |
2008-11-10 | Merge some parts of the i945 review (trivial): | Stefan Reinauer |
2008-11-10 | cosmetic update for getpir. | Stefan Reinauer |
2008-11-09 | i945.h: Add some more comments, align data for better readability (trivial). | Uwe Hermann |
2008-11-08 | The POST_CODE macro had the outb() argument order backwards. | Carl-Daniel Hailfinger |
2008-11-08 | flashrom: SST39SF040 TEST_OK_ PROBE READ ERASE WRITE | Peter Stuge |
2008-11-08 | Update bayou to use ACS_ macros for line drawing characters. | Ulf Jordan |
2008-11-06 | Re-add "based on" lines. | Uwe Hermann |
2008-11-06 | Drop #defines for registers that are not existant on the ICH7. | Uwe Hermann |
2008-11-06 | The enable_hpet() code in intel/i82801gx will not work with the | Uwe Hermann |
2008-11-05 | The ST M25P16 chip has been confirmed to work fine for probe, read, | Carl-Daniel Hailfinger |
2008-11-04 | Add support for 8 new chips to flashrom and fix up 2 existing chips | Carl-Daniel Hailfinger |
2008-11-03 | Fix compile errors if CONFIG_FS_PAYLOAD=1: | Jens Rottmann |
2008-11-03 | Add the missing I/O resources for IT8712F GPIOs. (E.g. some LiPPERT | Jens Rottmann |
2008-11-03 | Set asus/a8v-3_se to use printk in CAR. (trivial) | Marc Jones |
2008-11-03 | Update K8 FID/VID setup. Add support for 100MHz FIDs (revG). | Marc Jones |
2008-11-03 | Move the default payload to be more buildrom friendly. | Jordan Crouse |
2008-11-03 | modify pirq tables for epia-cn. | Ronald G. Minnich |
2008-11-03 | Dump ICH8/ICH9/ICH10 SPI registers in flashrom. | Carl-Daniel Hailfinger |
2008-11-03 | Add additional SPI sector erase and chip erase command functions to | Carl-Daniel Hailfinger |
2008-11-02 | Drop nr/opcode_index parameter from run_opcode and search the opmenu for the ... | Stefan Reinauer |
2008-11-02 | Get the lzma/ directory from v3 via svn:externals, for use with Bayou. | Uwe Hermann |
2008-11-02 | Import a slightly modified Bayou version into svn. This is based | Uwe Hermann |
2008-11-02 | Trim down the list of southbridges supported by the i82801xx driver | Uwe Hermann |
2008-11-02 | Add support for the ST M50FW002 chip to flashrom. Identification only, | Carl-Daniel Hailfinger |
2008-11-02 | inteltool 82945G/GZ/P/PL Support (trivial) | Stefan Reinauer |
2008-10-31 | Revert i945/ICH7 PCI IDs to be hard-coded numbers instead of #defines. | Uwe Hermann |
2008-10-31 | Move the nvramtool manpage to section 8 (as it's only really usable as root), | Uwe Hermann |
2008-10-30 | Leave room for ROM growth and for the payload. (trivial) | Marc Jones |
2008-10-30 | Increased the size of the failover and normal ROM_IMAGE_SIZE so abuild will | Marc Jones |
2008-10-30 | Here's a patch towards r3690 upping the ROM size for the S2912 Fam10 target t... | Arne Georg Gleditsch |
2008-10-30 | Add support for the LiPPERT Cool SpaceRunner-LX embedded PC board: | Jens Rottmann |
2008-10-30 | Allow nvramtool to build and work on FreeBSD. Tested on FreeBSD 7. | Andriy Gapon |
2008-10-30 | Mark two more chips as fully tested (trivial). | Uwe Hermann |
2008-10-29 | Flashrom support for some Numonyx parts (M25PE) | Stefan Reinauer |
2008-10-29 | Enable SPI boot flash support on EP80579, which has the ICH7 register set | Ed Swierk |
2008-10-29 | i945/ICH7: Use #defines from pci_ids.h (trivial). | Uwe Hermann |
2008-10-29 | Support for the Kontron 986LCD-M mainboard series. | Stefan Reinauer |
2008-10-29 | Support for the Intel 945 northbridge. | Stefan Reinauer |
2008-10-29 | Support for Intel Core Duo and Core 2 Duo (tm) CPUs. | Stefan Reinauer |
2008-10-29 | Support for the Intel ICH7 southbridge. | Stefan Reinauer |
2008-10-29 | Implement support for the Winbond W83627THG. | Stefan Reinauer |
2008-10-29 | Changes required to the device allocator: | Stefan Reinauer |
2008-10-28 | Allow superiotool to compile and work on FreeBSD. Tested on FreeBSD 7. | Andriy Gapon |
2008-10-28 | Mark Winbond W39V040FA" (512 KB) as fully supported, tested by | Uwe Hermann |
2008-10-28 | Add support for the Intel 82371MX (MPIIX) southbridge (trivial). | Uwe Hermann |
2008-10-27 | Add initial support for the MSI MS-6147 mainboard. | Mats Erik Andersson |
2008-10-26 | Add support for the Intel 82371FB PIIX and 82371SB (PIIX3) southbridges. | Uwe Hermann |
2008-10-25 | Add support for the VIA VT82C586A/B chipset, improve documentation. | Uwe Hermann |
2008-10-23 | Add support for the ITE IT8661F/IT8770F, IT8673F, and IT8671F/IT8687R. | Urja Rannikko |
2008-10-23 | make escape code handling for serial terminal more robust | Patrick Georgi |
2008-10-22 | Made await_ide(), which polls for an ide status change, check the status | Jens Rottmann |
2008-10-22 | Changed RAM speed calculation to fix RAM modules getting rejected only | Jens Rottmann |
2008-10-22 | Speed up copying coreboot to ram by using "movsl" instead of "movsb". | Jens Rottmann |
2008-10-22 | Fixes a off-by-one error when routing the IRQs. This led to IRQ15 not | Jens Rottmann |
2008-10-22 | Fix ordering problem in the libpayload Makefile. The include of | Uwe Hermann |
2008-10-22 | add multiboot support to defconfig (trivial) | Stefan Reinauer |
2008-10-22 | ouch. something went wrong with applying that old patch | Stefan Reinauer |
2008-10-22 | This has been sitting here since a looong time. | Stefan Reinauer |