| Age | Commit message (Collapse) | Author |
|---|
|
AMD's automatic phy phase detection hardware is very fragile and often
produces incorrect results. Attempt to recover from obvious phase
locking errors by retrying phy training on the failing link.
Change-Id: Ia2c3022534c9ad44714eef6e118869f054bd9f6b
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12006
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The existing MCT code did not properly set up the On Die Termination
(ODT) or timing values for registered DIMMs. Use the BKDG recommended
values when registered DIMMs are installed.
Change-Id: Ia9ee770d9f9c22e18c12e38b5bb4a7bae0a99062
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12005
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
There were numerous issues surrounding AMD ECC initialization on
Family 15h processors due to the incomplete derivation from Family
10h MCT code. Bring the Family 15h ECC initialization and supporting
setup code in line with the BKDG recommendations.
Change-Id: I7f009b655f8500aeb22981f7020f1db74cdd6925
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12003
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The existing ECC initialization algorithm contained several bugs on both
Family 10h and Family 15h processors, including activation of ECC scrub
before DRAM setup was completed, in violation of both BKDG and errata
recommendations.
Change-Id: I09a8ea83024186b7ece7d78a4bef1201ab34ff8a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12002
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I4202a62217a7aaeaba07e4b994a350e83e064c9c
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12001
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Iacd789b3572dc8ee85e76d56c46685e6df31d1a6
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12008
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I03e43f38e0d2e51141208ebb169ad8deba77ab78
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11963
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: Ie7278745358daf0c78cdb9c579db5291a1a2a0cb
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12004
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
It's not deprecated if it's still in active use. The code layout is just
"funny" (and could warrant a chipset-side cleanup, but not today)
Change-Id: I5f7776ceba0134f20364a0c4a1ca51382e9877e2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12429
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Since there are no longer any newisys mainboards, remove the directory
and Kconfig files. This removes the Kconfig warning:
mainboard/newisys/Kconfig:3:warning: config symbol defined without type
Change-Id: Icb2e782173166a26fa261f6cfb81b665a846931e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12423
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
When using FMAP regions (with option -r) that were generated with a
master header (as done by cbfstool copy, eg. in Chrome OS' build
system), there were differences in interpretation of the master header's
fields.
Normalize for that by not sanity-checking the master header's size field
(there are enough other tests) and by dealing with region offsets
properly.
BUG=chromium:445938
BRANCH=tot
TEST=`cbfstool /build/veyron_minnie/firmware/image.dev.bin print -r
FW_MAIN_A` shows that region's directory (instead of claiming that
there's no CBFS at all, or showing an empty directory).
Change-Id: Ia840c823739d4ca144a7f861573d6d1b4113d799
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0e5364d291f45e4705e83c0331e128e35ab226d3
Original-Change-Id: Ie28edbf55ec56b7c78160000290ef3c57fda0f0e
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/312210
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12416
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This is required to handle certain relative-to-flash-start offsets.
BUG=none
BRANCH=tot
TEST=none
Change-Id: I8b30c7b532e330af5db4b8ed65b21774c6cbbd25
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 596ba1aaa62aedb2b214ca55444e3068b9cb1044
Original-Change-Id: Idc9a5279f16951befec4d84aab35117988f7edb7
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/312220
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12415
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Kernel needs to set Audio IRQ as wake capable.
BUG=chrome-os-partner:47450
BRANCH=NONE
TEST=System wakes up from S0ix by pressing headset buttons.
Change-Id: I0f89d05b4c5449e5e3277dde938d941e4ad8cbea
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 65bf434f7c7e1662211f9c8bf61eeb4f41bdc675
Original-Change-Id: I7b5b564023044b4458eb0976488018b3226f4c70
Original-Signed-off-by: Saurabh Satija <saurabh.satija@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/311793
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12414
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
during shutdown
DWC2 UDC controller always requires an active packet to be present in
EP0-OUT to ensure proper operation of control plane. Thus, during
shutdown ignore EP0-OUT for queue empty check if only 1 packet is
present.
BUG=b:24676003
BRANCH=None
TEST=Compiles successfully. "fastboot reboot-bootloader" reboots
device without timeout in udc shutdown.
Change-Id: Iafe46c80f58c4cd57f8d58f060d805b603506bbd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4e7c27d849c0411aae58e60a24d8170a27ab8485
Original-Change-Id: Ifa493ce0e41964ee7ca8bb3a1f4bb8726fa11173
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/311257
Original-Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12413
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
Check if the simple queue consists of only 1 element.
BUG=b:24676003
BRANCH=None
TEST=Compiles successfully.
Change-Id: Ib257a5e6b9042b42c549f8ad8b943e3b75fd8c9c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5435d6fec1c4fbb4c04ba5b8c15caff9ee4e50f0
Original-Change-Id: I7a8cb9c4e7e71956e85e65b3e7b8e0af4d354110
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/311256
Original-Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12412
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
In 2014 or so the RTC code was changed to assume the ALTCENTRY
register (0x32) as always being utilized for creating an rtc_time.
However, one needs to ensure it's set at least once otherwise
the year field in rtc_time is not sane.
In practice this doesn't matter unless somone wants to use the
full year value. cmos_init() should do the same thing in the
rtc fail case, but the machine I had never had that set correctly.
BUG=chrome-os-partner:47388
BRANCH=None
TEST=Booted glados w/ 0xff ALTCENTRY value. New value is 0x20.
Change-Id: I028f801c5d717a0018ed00df82c25b466d64670c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7d5be5bc697bef60a264ddc7f67755aa96088d36
Original-Change-Id: I6e12a30c9e08d8c1002e4cef0f143f0f88009e92
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/311264
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12411
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The elog format stores the year of the event in bcd format.
Semi-recently rtc_get() started returning the full year,
e.g. 2015. However, bin2bcd takes a uint8_t as a parameter.
Converting a full year (2015 or 0x7df) to a uint8_t results
in passing bad values (223 or 0xdf) to bin2bcd. In other words
the input value of bin2bcd needs to be a number between 0 and 99.
Therefore fix that mistake.
BUG=chrome-os-partner:47388
BRANCH=None
TEST=Events show up with correct year in eventlog now.
Change-Id: I9209cb9175c0b4925337e2e5d4fea8316b30022a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 95a86013234dc999c988291f636e2db3803cc24a
Original-Change-Id: I12734bc3a423ba9d739658b8edc402b8d445f22e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/311263
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12410
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
1. This is required the BLOB change Ie86bb0cf
AMD Merlin Falcon: Update to CarrizoPI 1.1.0.1 (Binary PI 1.5)
2. This is tested on Bettong Alfa(DDR3) and Beta(DDR4). Both of the
boards can boot to Windows 10. PCIe slots, USB and NIC work.
Change-Id: I6cf3e333899f1eb2c00ca84c96deadeea0e23b07
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11752
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I01481f25189d01b6f4ed778902b2ecc4d39c7912
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12000
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The SB700 silicon is somewhat buggy; if the links come up in an
incorrect state after POR the silicon cannot automatically recover.
If a disk fails to come online, reset the associated link and try
disk detection again.
Change-Id: I29051af5eca5d31b6aecc261e9a48028380eccb3
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11999
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The existing prefetcher configuration was incorrect; use the correct
values from the AMD Family 10h and Family 15h BKDGs as appropriate.
Change-Id: I287ffa6345e1f4d232d4b2ea4251650ada3fda92
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12417
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The existing code enabled ECC before clearing memory. As the
AMD CPUs will generate MCEs on any invalid check bits, this
resulted in random lockups during memory training due to the
uniniailized check bits.
Initialize ECC check bits before enabling ECC hardware.
Change-Id: I992e7040520570893ba6a213138dd57bfa14733b
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11996
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
In AHCI mode SeaBIOS randomly fails to detect disks (AHCI timeouts),
with the probability of a failure increasing with the number of disks
connected to the controller. Resetting the SATA controller appears to
show the true state of the underlying hardware, allowing the drive
detection code to attempt link renegotiation as needed.
Change-Id: Ib1f7c5f830a0cdba41cb6f5b05d759adee5ce369
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11998
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
SeaBIOS AHCI drive detection randomly fails for drives present
on the secondary channel of each AHCI SATA BAR. Forcing native
drive detection in AHCI mode resolves this issue.
Change-Id: I34eb1d5d3f2f8aefb749a4eeb911c1373d184938
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11997
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I2f2658eb8b3142c86fef4ee50792f51954686cca
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12409
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I12323d76ab90f643f4dd4351d7e99824ec24f9be
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12408
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Certain DIMMs, for example DIMMs on which the EEPROM has been modified
by the end user, may not contain a valid SPD checksum. While this is
not a normal condition, it may be useful to allow a checksum override
while memory timing parameters are being altered, e.g. in the course
of overclocking or underclocking, or when recovering from a bad SPD
write.
This is an advanced level feature primarily useful for debugging
and development.
Change-Id: Ia743a13348d0a6e5e4dfffa04ed9582e0f7f3dad
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11987
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The plugged devices on PCIe should use IOAPIC2 instead of standard
IOAPIC1. The entries in IOAPIC2 count from the end of IOAPIC1.
The unchanged code worked because the OS uses MSI instead APIC.
To test that, boot linux with parameter pci=nomsi and see if the devices
like NIC work well as they do without the booting parameter.
run 'cat /proc/interrupts' to see if devices actually use
no-msi.
Change-Id: I5eab28956b7a3fbc7c10447e99d6c11dbe6a1d14
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/12363
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The plugged devices on PCIe should use IOAPIC2 instead of standard
IOAPIC1. The entries in IOAPIC2 count from the end of IOAPIC1.
The unchanged code worked because the OS uses MSI instead APIC.
To test that, boot linux with parameter pci=nomsi and see if the devices
like NIC work well as they do without the booting parameter.
run 'cat /proc/interrupts' to see if the devices actually use
no-msi.
Change-Id: Id6d35224312aeb6e3a175ec9990e0bb34bad67e7
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/12362
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The AMD Register Programming Reference states that the user should
have the option to disable Active Link Power Management for two
reasons. First, some drives may not function correctly with the
ALPM implementation of the SP5100, and second there are some
situations where low latency access is more important than the
power savings created by using ALPM.
Allow the user to disable ALPM if desired.
Change-Id: I88055cbb4df4d7ba811cef7056c0a6ca2612fcb0
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11993
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I6eba36dad71a2a2713181382484dc0e0976e1dad
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11988
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: If26e5d148a906d63bd1407b8ffa58f08ae6b4275
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11986
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I9a7049fd5601da10a954e02427ad59189fa93fa9
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12407
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: If881ec130833c7e7e62caa3d31e350a531f5bc8e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12398
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Don't hard code the PDCurses version number in every file
added to the object list.
Change-Id: Ic2e9230b7e3089c60dd7f442e3ea7baffb4aa400
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12397
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add intelvbttool to list of utilities to be build tested by the build
servers.
Change-Id: Id75724726778fd939fb7497f5b33a3d5d58124fd
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/12085
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I47089f2ad886a6fda4e0cd4472efd975bb8e06c5
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11995
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: If839fd71ed12c1fe27aeab374e242a6855737f5d
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11994
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I47755caf7d2ff59463c817e739f9cb2ddd367c18
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11989
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Under specific circumstances, for instance in low power or fanless
machines, it may be useful to cap the maximum P-state of the CPU.
Allow the maximum CPU P-state to be set via an NVRAM option.
Change-Id: Ifdbb1ad11a856f855c59702ae0ee99e95b08520e
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11985
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
o. Make some gpio changes base on Emile spec.
o. Init sdmmc function.
o. Revert cpu freq reducing in recovery mode since Emile
have more effective thermal than Mickey.
o. Revert the changes of lpddr3-samsung-2GB config.
BUG=chrome-os-partner:46658
TEST=build and boot on Emile
BRANCH=veyron
Change-Id: Ibdc2ce511c8e215c202e2067d79f4c60cdfca738
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 39e5436c8aa3353af77f62e548f48d19dc722999
Original-Change-Id: Ib2c78c9b5e3ac6620ab1772879a7ea0f7007f96e
Original-Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/307651
Original-Commit-Ready: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/12396
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch enables GPP_B5 as ACPI_SCI for wake.
It also defines touchpad wake device in ACPI with GPE0_DW0_05 for _PRW.
BUG=chrome-os-partner:43491
BRANCH=none
TEST=Build for kunimitsu. Tested wake from touchpad on a reworked kunimitsu board.
Change-Id: I4347be8f7a4552c6b583f0797fab64045aa9792e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8c21f3b5df21d96937975dc20ee5e2f83fb3d75e
Original-Change-Id: I76e69bdba81ec22ae67c7cff3a807cea8c54a5b3
Original-Signed-off-by: Archana Patni <archana.patni@intel.com>
Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/311007
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12395
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This is a copy of mickey and renamed.
CQ-DEPEND=CL:306967
BUG=chrome-os-partner:46658
TEST=build coreboot
BRANCH=veyron
Change-Id: I9e1232f3f1334ec747a5beb52f214635a7ab08ae
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9316a9ec27d5799e290add1e5818f4449b680fde
Original-Change-Id: I906de7bbc8b8e110e0774c14ec636a327230b325
Original-Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/307620
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/12394
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
When enabling CONFIG_SEPARATE_VERSTAGE the functions in chromeos.c need
to be put into verstage.
BUG=chrome-os-partner:46289
BRANCH=none
TEST=enable SEPARATE_VERSTAGE and build for chell
Change-Id: Ic58a6e383806a7a64b9af760e194fddf15c645f1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 403f0707074802371237beecf1941034c1612f10
Original-Change-Id: Ib1154869974337b53a64efa5892a83ecd81973b8
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/310928
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12393
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In order to wake from trackpad and wifi we cannot enable Deep S3.
BUG=chrome-os-partner:46289
BRANCH=none
TEST=wake from trackpad on chell
Change-Id: Ieb2210d5d15b5f5d744a686c743df11e5d72558f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cbc74e13b754249869144df84ab2bb9b7e77119a
Original-Change-Id: I84265197fb964e0594a4672a40fd3e2362e29ae1
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/311306
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12392
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This adds the SPD for SK-Hynix H9CCNNNCLTMLAR memory to be
used in the EVT build.
BUG=chrome-os-partner:47346
BRANCH=none
TEST=emerge-chell coreboot
Change-Id: I45d0840e43ed81d8286b005f0a99b014b7f0cf28
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1e917440141c586cb370147f9c5b782d6e77ea10
Original-Change-Id: I02f1349f38d83f4a09887adf81384b5a8f475dd0
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/311214
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12391
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The family variable was not being set yet for skylake, add this
to the current boards.
BUG=chromium:551715
BRANCH=none
TEST=emerge-glados coreboot
Change-Id: Icf175e4ce89cb47b9eabce1399eb3ef29e7a607f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7e379402f38634eb0204e03b616111fff9515cec
Original-Change-Id: Ia31fb04b5c22defc71a0c02d9fa1eff93ccbc49d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/311213
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12390
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The net names are offset by 1. My board is not stable enough
to really test all of these yet...
BUG=chrome-os-partner:46289
BRANCH=none
TEST=emerge-chell coreboot
Change-Id: I65e17323f2819eca130c1bf0ccbc3ea0ec2f383f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 327194dcfcb3a5c9f431b1a2e26c230cb2b2a48b
Original-Change-Id: I50e9ea091bb6e6a1da3a9434ae0fbf3f652fa354
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/311113
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12389
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This script generates the rough format for the release notes, and will
add new commits to the top of an existing release notes text file. At
that point, a lot still needs to be done by hand - deciding which
commits deserve to be in the release notes, and which don't.
When updating the existing release notes, The updates are just added
to the top of the file, and need to be placed manually. This just
helps prevent missed commits.
When editing the release notes, don't delete or modify the commit id
lines after they've been classified - Just move them to the bottom of
the file until the notes are ready to publish. This keeps those commits
from re-appearing at the top of the file the next time the script is run
to update the notes.
Change-Id: I0a699c528117f0347a65a3bed4402f3a57309e3c
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12318
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: If7b6062fd4df16ae2864b5d9adfdd19c4356691c
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12400
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I5fee5f5fdf30ab6e3c4f94ed3e54ea66c1204352
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11980
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
|
|
This patch adds CC6 power save support to the AMD Family 15h
support code. As CC6 is a complex power saving state that
relies heavily on CPU, northbridge, and southbridge cooperation,
this patch alters significant amounts of code throughout the
tree simultaneously.
Allowing the CPU to enter CC6 allows the second level of turbo
boost to be reached, and also provides significant power savings
when the system is idle due to the complete core shutdown.
Change-Id: I44ce157cda97fb85f3e8f3d7262d4712b5410670
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11979
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
A wrong function name made an #ifdef'd code path not compile. Fix that,
and also use IS_ENABLED() to make sure that such issues won't come up
again there.
Change-Id: Iccb98842dde498cce32cd86a770e22a506ad4cc2
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/12296
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This is an attempt at better compatibility with driver matching etc.
Change-Id: I26eccbe17a31ba2042d0fe1bb424d9f380c0a82e
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Reviewed-on: http://review.coreboot.org/12351
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Pulled getpir from the attic and used data provided by it
to create the table a bit more programmatically and
added the AGP slot so the video card is given an IRQ
Change-Id: Id3dc1a77ac6382405f5f36707994287e84e1168b
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Reviewed-on: http://review.coreboot.org/12350
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Up to now the GPIO set up macros for input sets up GPIOs to be
mapped to memory space while macros for outputs sets up GPIOs
to be mapped to legacy io space. This patch adds two additional
macros for legacy output definition and changes the old macros
to memory space mapping.
In addition, the intel/minnowmax mainboard is modified to use
the legacy macros for outputs to ensure this mainboard stays
unchanged in terms of functionality.
TEST=Booted siemens/mc_tcu3 and ensured GPIO set up in linux.
Change-Id: I99e98d31e1a59e63c58d536f2c493d6dcbfd1e75
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/12340
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Iae1cbe7d3a6471561abfdb8e182bc764c38bb222
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11978
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ibeb35da3395dc77a21a2f92f0e1d0845be53d175
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11977
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
DRAM training accounts for most of the romstage startup time, yet
if the hardware configuration has not changed from the previous boot
the previously discovered training values are still valid. Use them
if the DIMM configuration has not changed since the last boot.
The SPD values of all installed DIMMs are hashed and stored in the S3
resume data area of the main system Flash device. If a DIMM is changed
the hash will almost certainly change as well, forcing retraining on next
boot.
Change-Id: I37ed277b16476d38e4af76c6ae827a575c6b017d
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11976
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: Ib6d1be64691cf5a1c0b7464284fbae4e583f383e
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12402
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
When we first added ARM support to coreboot, it was clear that the
bootblock would need to do vastly different tasks than on x86, so we
moved its main logic under arch/. Now that we have several more
architectures, it turns out (as with so many things lately) that x86 is
really the odd one out, and all the others are trying to do pretty much
the same thing. This has already caused maintenance issues as the ARM32
bootblock developed and less-mature architectures were left behind with
old cruft.
This patch tries to address that problem by centralizing that logic
under lib/ for use by all architectures/SoCs that don't explicitly
opt-out (with the slightly adapted existing BOOTBLOCK_CUSTOM option).
This works great out of the box for ARM32 and ARM64. It could probably
be easily applied to MIPS and RISCV as well, but I don't have any of
those boards to test so I'll mark them as BOOTBLOCK_CUSTOM for now and
leave that for later cleanup.
BRANCH=None
BUG=None
TEST=Built Jerry and Falco, booted Oak.
Change-Id: Ibbf727ad93651e388aef20e76f03f5567f9860cb
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12076
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
In order to have a proper runtime-modifyable page table API (e.g. to
remap DRAM after it was intialized), we need to remove any external
bookkeeping kept in global variables (which do not persist across
stages) from the MMU code. This patch implements this in a similar way
as it has recently been done for ARM32 (marking free table slots with a
special sentinel value in the first PTE that cannot occur as part of a
normal page table).
Since this requires the page table buffer to be known at compile-time,
we have to remove the option of passing it to mmu_init() at runtime
(which I already kinda deprecated before). The existing Tegra chipsets
that still used it are switched to instead define it in memlayout in a
minimally invasive change. This might not be the best way to design this
overall (I think we should probably just throw the tables into SRAM like
on all other platforms), but I don't have a Tegra system to test so I'd
rather keep this change low impact and leave the major redesign for
later.
Also inlined some single-use one-liner functions in mmu.c that I felt
confused things more than they cleared up, and fixed an (apparently
harmless?) issue with forgetting to mask out the XN page attribute bit
when casting a table descriptor to a pointer.
BRANCH=None
BUG=None
TEST=Compiled Ryu and Smaug. Booted Oak.
Change-Id: Iad71f97f5ec4b1fc981dbc8ff1dc88d96c8ee55a
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12075
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Among its other restrictions (which are noted in a comment above the
function prototype and stay in place), our makeshift fine-grained page
table support for ARM32 has the undocumented feature that it relies on
a global bookkeeping variable, causing all sorts of fun surprises when
you try to use it from multiple stages during the same boot. This patch
redesigns the bookkeeping to stay completely inline in the (persistent)
TTB which should resolve the issue. (This had not been a problem on any
of our platforms for now... I just noticed this because I was trying to
solve the same issue on ARM64.)
BRANCH=None
BUG=None
TEST=Booted veyron_jerry. Mapped a second fine-grained memory range
from romstage, confirmed that it finds the next free spot and leaves the
bootblock table in place.
Change-Id: I325866828b4ff251142e1131ce78b571edcc9cf9
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12074
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Ia5c00f07de81d409e6215cc0944d64d00e47b795
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12401
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I4e0a52eb90910604f8640ad7533b5d71be6c8e20
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11983
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I8ee757d07c82c151b36def6b709163ff144d244f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11984
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I5323462dcb8a4e84786be38cc85070eb48d4a31d
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11982
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I147284e6a435f4b96d6821a122c1f4f9ddc2ea33
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11981
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Upon bootup the hardware reads at minimum 256 * 16 bytes (4Kb, or 32KB) over
I2C on a system with all DIMM slots populated. If even one of those reads
has a single flipped bit in it (due to EMI, cross coupling with another trace,
or just poor margins on some cheap DIMM) the system will hang and require a
hard reset. In practice I've seen failure rates as high as 1 failed boot in
50 due to this issue, granted with cheap DIMMs, but even so retrying the read
resolves the corruption issue.
I2C is not designed for continuous data transmission with high reliability, and
there is no hardware error checking, therefore a single retry when transferring
this amount of data makes sense.
Change-Id: Ifab63eca2233c63a6a42ab8b7e742f8e47fb2a09
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11975
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: I36c2b0290f95f4c0f6bed6a7427fb3aab968d4da
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12376
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I1ad581454e08f7a24395f50623f29ec14e07f5fb
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12360
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: I866440595a0a38b65ce037dc9a1f7e4c02c6beb3
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12385
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: I41d1f9eac2f4c37bec4d046a68f3f1cf95b51703
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12384
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: Idd6011302d2164275fe01954ad3e4e13474ec7a9
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12382
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: I915d5dd4a095b84023a19c9a0474634320207a08
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12381
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: Icfdcc5d6043987e22ef9b4db84847d62c91bd305
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12380
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: Ie44a3c46b82e77028921339c50ae4c176e38055c
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12379
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Rev F's SPD address is different from other revision.
0 1
Channel A A0 A2
Channel B A4 AC
Change-Id: I620d1f9c295f9a0e30e3821ea36a05dd9f7d3495
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/12342
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: I9099f90c073197cc95bb9630788016b7b8221922
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12383
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: Ifd1dfa35ae13ec01d932250994086edebece924d
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12377
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: Idfec80ce79c906717e679d6576dc94e71da994c9
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12378
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: Ibf3849dcd7a1ef1d8bc5dfc864172a8254a64b6f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12375
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: I460208c18964857be73d9a4449ecfd872ccad98a
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12374
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: I4a942150590fb69ff97279ff2b48b3be83abafa4
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12372
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: I5b0fb633b7611e2a69aeb33cd31ca8fd4a83592c
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12369
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: I180fd548e8f45fc94e5086159c0e3e9465c74598
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12386
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: I1913ca75aa6f2a2c6b97d49faaabc16afd2799f5
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12371
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: If0e0a7f69b77cf4bcab4c0dcb58a153485380069
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12373
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: I8854c31f242c13b6f91901452f7eb7ce0ef0b255
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12370
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: Ic71d8a9137f0bd2a0cc7571a43f9dddb50168d8d
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12368
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
All boards using this SuperIO have been removed from the tree already.
Change-Id: I3c43a431d92d76b6ed3ec72b203d3e80925cadea
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/12247
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
NOTE: This commit switches CacheBase in CAR to use the DCACHE_RAM_BASE
Kconfig variable. There should be no functional difference between
the existing code and the new code, however hardware verfication is
encouraged on lesser used architectures such as AMD Geode.
Change-Id: Ia2e8f99be9df388e492a633c49df21ca1c57ba13
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11970
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: Ic16a927a3f1fc6f7cb1aea36a8abe8cc1999cb52
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11973
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The build was changed to remove usage of microcode .h files when
all of the .h files were converted to binary. This is still
needed for some builds when microcode binaries aren't in the
blobs tree.
Change-Id: Ia323c90efe8aa0b8799fc5cce6197509e466a105
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12333
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This is an update to the script in the blobs repo that converts
individual or multiple files into a microcode binary.
Change-Id: I66fb650bbfa334d1f07e8e3914ef6deb8e72bbb4
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12332
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The obsolete and removed getpir utility remarked in its output that the
data is autogenerated. The tool was removed because it wasn't very
reliable, so there's no need to point that anymore.
Change-Id: I5d624931ba7872b1fefa8fa3c270ae7367e069fa
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12354
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
BUG=b:24676003
BRANCH=None
TEST=Compiles successfully. fastboot devices shows serial number for
shark.
Change-Id: I61d6c168fa458d1f880bc566db997aa5d6398361
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 45b286b318281aea9a4b0362c9259d748b66fd28
Original-Change-Id: Ib9cc22de9daa6c5ec9cde1e62c6f5f768e946069
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/310984
Original-Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12348
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=b:24676003
BRANCH=None
TEST=Verified that udc shutdown returns after the timeout.
Change-Id: I5df598c4eddecbecb353343ef5a4e44eae4fc20b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 268913f21adea9969c9f88e3cb759341a60719f0
Original-Change-Id: I3ee059791d6e821f83f9ac41fd7c5385bd60e21e
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/310983
Original-Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12347
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
'edid->hdmi_monitor_detected' would indicate whether the monitor
interface is HDMI or DVI.
BRANCH=none
BUG=chrome-os-partner:43789
TEST=Previously, my LG monitor couldn't show dev screen. But now I can see
dev screen have been posted normally.
Change-Id: Id71f051b2cd792712e52bee7a763db383c1962a8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 88101589a22d06f0bc25e0750b2862cf66b55391
Original-Change-Id: I157861d327926b834e1e8606b0b676f413491c70
Original-Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/309056
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/12346
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
HDMI driver need to know whether the monitor is DVI
or HDMI interface, so this commit just introduce a
new number 'hdmi_monitor_detected' to struct edid.
There were four bits to indicate the monitor interfaces,
it's better to take use of that. But those bits only
existed in EDID 1.4 version, but didn't persented in
the previous EDID version, so I decided to detect the
hdmi cea block.
BRANCH=none
BUG=chrome-os-partner:43789
TEST=When mickey connect with HDMI monitor, see 'hdmi_monitor_detected' is 'true'.
When mickey connect with DVI monitor, see 'hdmi_monitor_detected' is 'false'.
Change-Id: I1a4f1410e1cce1474ffae858db161a18578cac3a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 409f041805d9fdff2d49faa1a3a262cf4dc609c2
Original-Change-Id: Ife770898b0f2b4f58b8259711101a0cab4a5e4ac
Original-Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/309055
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/12345
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
