summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-01-09cpu/intel/common: Fix generated exception if not supported VMXElyes HAOUAS
Reading rdmsr(IA32_FEATURE_CONTROL) in function set_feature_ctrl_lock() will generate an exception if the CPU do not support this MSR. Tested on pentium4 (CPUID F65). Change-Id: I72e138e3bcffe1dcd4e20739a8d07c9abfab4f80 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30713 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2019-01-09cpu/intel/microcode_asm.S: Fix reading cpuid(1) and checking PFArthur Heymans
The value of %ebx was clobbered later on by a cpuid call. A bitwise and needs to be used to check processor flags. Change-Id: I29f1fddfe3cc2cbfc7c843b6aff7425f32e12317 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30680 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-08samsung/lumpy: add cpu/gpu pwm backlight register valuesMatt DeVillier
Required for functional internal display on lumpy using libgfxinit or Tianocore GOP driver Test: boot/build lumpy, verify internal display functional prior to OS driver loading. Change-Id: If62a4ae58082548e8a645d1a2de40705bdd2946e Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-08mb/google/sarien: Set minimum assertion width valuesDuncan Laurie
Explicitly configure the minimum assertion width values to ensure that they are set as expected and are not using unknown defaults. Change-Id: I9a88e5b6002137df6e572b84d0de8a69522938f9 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-08mb/google/sarien: Enable recovery mode GPIODuncan Laurie
Enable the active-low recovery mode GPIO now that new boards are available which have an external pull-up instead of a pull-down so it can be asserted properly by servo. This was tested on a Sarien system by holding the recovery button on the servo board and tapping the cold reset button and ensuring that it enters recovery mode. Change-Id: I3216580bc94de71b05bf9382f15d0c4d428cb9fa Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30721 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-08mb/google/sarien: Remove power button ACPI deviceDuncan Laurie
These platforms use the standard fixed function power button and do not need a second power button device declared or the kernel will end up with two devices reporting the same event. Change-Id: I6fe2b201a6a6f6307a0c4bd6a61f56cfcdd88bf4 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-08soc/intel/cannonlake: Add FSP UPD for minimum assertion widthDuncan Laurie
Expose the FSP tunables for the chipset minimum assertion width settings which can be configured per-board. The defaults appear to be different from what is listed in the FSP header documentation so I tried to list what the actual default is based on the source rather than what is stated the header comments. Change-Id: Ie0606c2984727adf13c9fb8395586287162e49ca Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-08soc/intel/cannonlake: Add chipset event loggingDuncan Laurie
Add logging of chipset events on boot into the flash event log. This was tested on a google/sarien board to ensure that events like "System Reset" are added to the log as expected. Change-Id: I38498cef36d8cc9c8a1f63d12618ea768b65254c Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-08soc/intel/cannonlake: Fix chipset_power_state structureDuncan Laurie
This structure is declared as a static CAR_GLOBAL in the common PMC library code and in the SOC specific code. Remove the SOC specific version and instead get the chipset_power_state pointer from the PMC library. This fixes events that were recorded in chipset_power_state at boot but were reading as all zero when it was time to parse the structure when logging events to flash. Change-Id: I67a4f724c0707d98766ad28abd8d0b66a5615745 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30717 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-08arch/x86/Kconfig: Fix spelling of *successful*Paul Menzel
Change-Id: If0da91cf94aa12fe7b8670f6b181e443e3446aa1 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/30745 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-08arch/x86: Link walkcbfs.S instead of including itArthur Heymans
Link walkfcbfs.S in the C_ENVIRONMENT_BOOTBLOCK case and also in the romstage. This is useful for cbfs access in pre-CAR environments. Change-Id: I9a17cdf01c7cbc3c9ac45ed1f075731f3e32f64b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30681 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-08cpu/intel/car/bootblock.c: Report BIST failuresArthur Heymans
The result is saved in a static variable and is reported when the console is initialised. Change-Id: I5f0f9edce68634adfe4a77a0d2c0bf3d7cd4e78e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-08cpu/intel/car: Enable use of C_ENVIRONMENT_BOOTBLOCKArthur Heymans
Add common C entry points that hook to platform-specific bootblock code. Change-Id: I8eac974864f255811e8708997a8014a45a5c09ee Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-08cpu/intel/car: Prepare for C_ENVIRONMENT_BOOTBLOCKKyösti Mälkki
Pass timestamps and BIST to romstage using the same signature as C_ENVIRONMENT_BOOTBLOCK will. Change-Id: Ic90da6b1b5ac3b56c69b593ba447ed8e05c8a4e2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30492 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-08arch/x86: Unify bootblock MMX register usageKyösti Mälkki
Have same usage of registers with romcc bootblock and C_ENVIRONMENT_BOOTBLOCK. Change-Id: Ibfa80e40f0b736a904abf4245fc23efc0cdc458d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-08sb/intel/i82801gx: Autodisable functions based on devicetreeArthur Heymans
This removes the need to synchronize the devicetree and the romstage writing to FD. Change-Id: I83576599538a02d295fe00b35826f98d8c97d1cf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30244 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-08mb/{d41s,d510mo}: Remove references to PCIe port 5 and 6Arthur Heymans
The southbridge has the function disable bits for port 5 and 6 strapped RO to 1 (disable). Change-Id: I2948935d42b9031d61f9e5b3f06b769e68f5a042 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30712 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-08mb/{ga-g41m-es2l,d945gclf,rk886ex}: Fix devicetreeArthur Heymans
The devicetree was synced incorrectly with respect to the function disable register set in romstage. Change-Id: I189c5fdc433b5577ae008abf42878cdc6e3f2d52 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30711 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-08soc/intel/icelake: Increase bootblock sizeSubrata Banik
This patch fixes icelake build brokenness due to bootblock size issue. Increase the bootblock size to 48K to match skylake. With UART enabled we are very near the 32K limit, and with upcoming changes to add USB devices in devicetree for a icelake board it is over the current 32K limit. BUG=b:122485106 TEST=Able to build dragonegg Change-Id: I66706e66ac1bce677fe11022d0eef44b9efc2e76 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/30702 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2019-01-08Documentation/releases: Note the disappearance of device_tPatrick Georgi
That was truly a huge task. Change-Id: Ifd79aaf005bf39744bd4fd930ba2441f966ec0b3 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/30669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-08Documentation: Add 4.10 release notes templatePatrick Georgi
Change-Id: Ibb7aab2367c379bbf7ab93a41ce06095916d0f95 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/30345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-08amdfam10 boards: Fix regression on dev_find_slot() removalKyösti Mälkki
For these platforms, the first PCI node on devicetree is not the root of PCI bus hierarchy, and the topology (bus->children and dev->sibling links) are getting manipulated during HyperTransport enumeration. This workaround reverts back to old dev_find_slot() with its bad semantics. Change-Id: I19745c3070c12e562ffab2f0243c9d91dd051c72 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-07nb/intel/gm45: Remove the C native graphic initArthur Heymans
Libgfxinit provides a better alternative to the native C init. While libgfxinit mandates an ada compiler, we want to encourage use of it since it is in much better shape and is actually maintained. This way libgfxinit also gets build-tested by Jenkins. Change-Id: I540cf08cef6ff7825694ebfa36e2e6437916e657 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/27016 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-07Documentation/gerrit: Update parts about WIP and draft commitsPatrick Georgi
Gerrit dropped the "draft" concept and replaced it with private commits and work-in-progress commits, options that can be used independently from each other. Change-Id: I6abe267c2091c750fc234057be3a4e62adb59c4c Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/30309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-07mb/google/hatch: Enable touch panel supportMaulik V Vaghela
Following changes are done to enable touch screen support on hatch 1. Enable I2C1 device at 400Khz at 3.3V 2. Configure GPIO for touch screen 3. Add ACPI entry for ELAN touch panel 4. update GPIO table with not connected GPIO pins for panel BUG=b:120914069 BRANCH=none TEST=check if code compiles with changes. Change-Id: I8dab07dad4cb197865bb9cf0e8da240810fcfabe Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/30425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-01-07intel/lynxpoint: Fix spellingKyösti Mälkki
Change-Id: I684e1962a9d4312ee9fad4ada70323b02ca3ae48 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-07src/mb/asus/p5qpl-am/romstage.c: Fix commentAngel Pons
Change-Id: I2b3ad53766bc9cef5ae00392814a03a3e177ad35 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/30705 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-07usbdebug: Sanity check PCI EHCI locationKyösti Mälkki
If requested EHCI function is not on bus 0, we would need to open MMIO windows and configuration register space for the connected upstream PCI bridge for it to work. We don't plan to do so. Change-Id: I7c1c60f9d9890dedfedc9d977faf5152ba362692 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30692 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-07usbdebug: Probe for gadget only onceKyösti Mälkki
The first stage attempting to initialise usbdebug gadget will leave it marked as non-present if none is detected. This allows further stages to bypass usbdebug init sequence. Change-Id: I1491d7fab3c89f210fb03b32481f697bc7a1d1e6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30622 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-07usbdebug: Initialize the HW once in CAR stagesArthur Heymans
The EHCI hardware needs to be initialized only once during CAR stages. Some exception need to be made when a blob messes with the EHCI hardware. To achieve this add a fixed location in the car.ld linker script such that the ehci debug information can be shared across CAR stages. Currently this means only romstage and bootblock, but verstage can also be hooked up later on. Tested on google/peppy: Both the bootblock and the romstage properly output console. Change-Id: I78e20a172fd5cc81f366d580f3cce57b9545d7a2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-07crossgcc: Update Python to version 3.7.2Elyes HAOUAS
Change-Id: Ie0b3d31ba116314308d4fcc36a19587370fff7cc Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30560 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-07sb/intel/fsp_rangeley: Fix typo in GPIO LevelElyes HAOUAS
Change-Id: I83886820b8c1acceb2007b694361fe8c30c34f7f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: David Guckian
2019-01-07sb/intel/bd82x6x: Fix typo in GPIO LevelArthur Heymans
Change-Id: I5e24120ca788ace8b61f8a7aee177c7247d30de2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30401 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2019-01-07mb/google/poppy/variant/rammus: enable USB acpimarxwang
Main objective for this change is to export the bluetooth reset gpio to the kernel for use in an rf-kill operation. To do so, we enable USB acpi and define all of the USB2 devices, which includes bluetooth's reset gpio information. BUG=b:119899987 TEST=build and flash to rammus, log into rammus and 'cat /sys/firmware/acpi/tables/SSDT > /tmp/ssdt.dml', copy that ssdt.dsml to /tmp/ssdt.dml on host machine, 'iasl -d /tmp/ssdt.dml', then verify that "reset gpio" shows up in the HS03 node's _DSD package in the table. Signed-off-by: marxwang <marx.wang@intel.com> Change-Id: Ieadb3609c7634a20e96c7c4dfb96f5e3f23e468b Reviewed-on: https://review.coreboot.org/c/30607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-07mb/google/sarien: Correct I2C bus clock for touchpadLijian Zhao
Elan touchpad require connected i2c clock to be running at 400Khz, with the modification can get 404Khz speed from Arcada EVT platform. BUG=b:119628524 TEST=Build and boot up on Arcada platform, measure the i2c clock is around 400Khz. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: If717cdd6b73394125df54d90f729ffb4ef37b087 Reviewed-on: https://review.coreboot.org/c/30653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-07mb/google/sarien: Modify ELAN Touchpad i2c bus clkJohn Su
Modify ELAN touchpad bus i2c clk from 466Khz to 400Khz. BUG=b:119628524 BRANCH=master TEST=measure ELAN Touchpad CLK Change-Id: Ia8433c6ef320cea9a0145db4ba440d67ccd0f41e Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30588 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-07src: Use "foo **bar" instead of "foo ** bar"Elyes HAOUAS
Change-Id: I8260424ee243c06827f2b5939e1568e52539b282 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-01-07src: Move constant to the right side of comparisonElyes HAOUAS
Change-Id: I76d35a3643600f81a6da7e0af99c935ebd1c2fc7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/27015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-07soc/intel: Standardize names of common MSRsElyes HAOUAS
Use defined name in Intel 64 and IA-32 Architectures Software Developer’s Manual. Renamed MSRs are (register address, register name): 0x35 MSR_CORE_THREAD_COUNT 0x121 MSR_EMULATE_PM_TIMER 0x1f4 MSR_PRMRR_PHYS_BASE 0x1f5 MSR_PRMRR_PHYS_MASK 0x2f4 MSR_UNCORE_PRMRR_PHYS_BASE 0x2f5 MSR_UNCORE_PRMRR_PHYS_MASK Change-Id: I53f11a2ce831456d598aa21303a817d18ac89bba Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-06util/ifdtool: Fix regions_collide() checkNico Huber
The old version was unnecessarily complex and allowed one region to include the other. Change-Id: Ibf7faf8103c8945b82c3962b5a7b82c3288b871f Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/30673 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-06soc/intel: Drop pmc_get_mainboard_power_failure_state_choice()Nico Huber
It's not needed anymore. Change-Id: I273acb2bf1675dc947927e3e6d2ebb78aa94518a Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29681 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-01-06Kconfig: Unify power-after-failure optionsNico Huber
The newest and most useful incarnation was hiding in soc/intel/common/. We move it into the Mainboard menu and extend it with various flags to be selected to control the default and which options are visible. Also add a new `int` config MAINBOARD_POWER_FAILURE_STATE that moves the boolean to int conversion into Kconfig: 0 - S5 1 - S0 2 - previous state This patch focuses on the Kconfig code. The C code could be unified as well, e.g. starting with a common enum and safe wrapper around the get_option() call. TEST=Did what-jenkins-does with and without this commit and compared binaries. Nothing changed for the default configurations. Change-Id: I61259f864c8a8cfc7099cc2699059f972fa056c0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29680 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-06mb/google/slippy: Add a VBT for all variantsArthur Heymans
The vbt was extracted from the option rom found on stock images. The vbt.bin is the same across all variants. The VBT has a modified BDB block 43, the 'Backlight info block' such that the inverter type for the panel in use is set to 2 (BDB_BACKLIGHT_TYPE_PWM) instead of 0 (BDB_BACKLIGHT_TYPE_NONE). This only seems to matter on Windows, as without it changing the backlight duty cycle does not work. Change-Id: I82c72c561e1058e0b77d80baf330b64f7c6b08e3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30487 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-06usbdebug: Make the EHCI debug console work in the bootblockArthur Heymans
Currently this needlessly initializes the hardware in the both the romstage and the bootblock, but it works. Build option is renamed to USBDEBUG_IN_PRE_RAM to reflect the use better, related support files can be built to pre-ram stages regardless of usbdebug being enabled or not. Tested on Google/peppy (adapted to C_ENVIRONMENT_BOOTBLOCK). Change-Id: Ib77f2fc7f3d8fa524405601bae15cce9f76ffc6f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30480 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-06superio/*: Link early initialization into bootblockArthur Heymans
This allows to set up the SuperIO in the C_ENVIRONMENT_BOOTBLOCK bootblocks. It is likely unnecessary to do this in verstage. This also renames COMMON_ROMSTAGE to COMMON_PRE_RAM. Change-Id: I3d999611baa1e79c79fe6b1f01822ebaa5f85daf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-06mb/google/fizz: enable eist (enhanced speedstep)Matt DeVillier
Without eist enabled, fizz's CPU clocks are locked at the base frequency, and don't scale up or down. This prevents fizz from idling properly and turbo boost from functioning, so enable it (as is done for all other KBL boards) Test: build/boot google/fizz, ensure CPU clocks scale as expected Change-Id: I77dd0e1df1bf88f5bae18e9f832ca8d60fb777b4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-06src/mb/apple/macbookair4_2: move early_southbridge.c to romstage.cAngel Pons
This is done for consistency purposes. Also fix a small formatting issue in a function. Change-Id: I5dc170dbca59b7abbc912f9a26f76886b25ad82f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/30654 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-06usbdebug: Refactor init callsKyösti Mälkki
Expose the function that can unconditionally re-initialise EHCI debug host and gadget. Given the missing header in soc/intel files that prevented building with USBDEBUG_IN_ROMSTAGE=y, it is not actually known if those SOCs work at all for usbdebug. Change-Id: I8ae7e144a89a8f7e5f9d307ba4e73d4f96401a79 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-06device: Use pcidev_path_behind()Kyösti Mälkki
Change-Id: Iac16f9412d0e6aac908d873c61a4de3935e5318a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/26518 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-06device: Use pcidev_path_on_root()Kyösti Mälkki
Change-Id: I2e28b9f4ecaf258bff8a062b5a54cb3d8e2bb9b0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-06device: Use pcidev_on_root()Kyösti Mälkki
Change-Id: Icf34b39d80f6e46d32a39b68f38fb2752c0bcebc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/26484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-05cpu/intel/common: improve debug outputMatt DeVillier
currently, if the IA32_FEATURE_CONTROL lock bit is already set, VMX status isn't reported. Adjust debug output to provide more useful infomation on both VMX and lock bit statuses. Test: build/boot google/chell, observe useful output in cbmem log regardless of lock bit status. Change-Id: Ie50f214f7e3fcfd6c3d0d2de034a93518c0a6b46 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-05crossgcc: Update CMake to version 3.13.2Elyes HAOUAS
Change-Id: Ifd9e82d564e4e49194ac48786fd233cbf97a55c5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-05crossgcc: Update GDB to version 8.2.1Elyes HAOUAS
Change-Id: I454843dcabe7e3fa4b13dd58ce81ba9f25b5a432 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-05crossgcc: Update LLVM to 7.0.1Elyes HAOUAS
Change-Id: I7d88f0c36a254d8b2e3e76f632f46f0d2a4ad6f8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-05util/inteltool: fix PCR init of Sunrise Point-LP devicesShaleen Jain
Fixes getting a dump of GPIO registers for these devices. Change-Id: I80f05a170152969ba45d6aee33ab7ed5296ee496 Signed-off-by: Shaleen Jain <shaleen@jain.sh> Reviewed-on: https://review.coreboot.org/c/30604 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-04crossgcc: Update acpica and Expat versionsElyes HAOUAS
Update: * acpica to version 20181213 changes in this version: https://acpica.org/node/163 * Expat to version 2.2.6 changes in this version: https://github.com/libexpat/libexpat/blob/R_2_2_6/expat/Changes Change-Id: Ib67cf26497a0c2c2a364741675b13e4ce0190e41 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30313 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-04mb/*/chromeos.c: Fix PRE_RAM and unify styleKyösti Mälkki
Change-Id: I99b9c0452ed0e6d580edb5a4f3317d776085b382 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30399 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-04mb/google/jecht: Rename save_chromeos_gpios functionKyösti Mälkki
We have init_bootmode_straps() defined for the same purpose. Change-Id: Ia2692d8f8986247ea4ce889d6252d3c4c8b27bc4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30398 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-04AGESA: Use pcidev_on_root()Kyösti Mälkki
We have constant CONFIG_CBB==0, replace ill dev_find_slot() with safe pcidev_on_root(); Change-Id: Ieb2030fa3d77a9f49fc5faf12b92b5f00f49d354 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/26482 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-04binaryPI: Use pcidev_on_root()Kyösti Mälkki
We have constant CONFIG_CBB==0, replace ill dev_find_slot() with safe pcidev_on_root(); Change-Id: If536adf11aacef8faa3455692285552f97531df9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/26483 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-04soc/intel/fsp_broadwell_de: Use BLOBs for microcode updatesPatrick Rudolph
Add possibility to update microcode from BLOBs repo. No need to copy headers around which have an unclear license. Tested on wedge100s: * Microcodes are included into FIT. * Still boots to Linux. * 3rdparty/blobs at dd00ad1260ef1dc0ba8c55c06ab10c7639dc3eb1 Change-Id: I8ecfb7302a7fc847a51934942f6d323a4f96abba Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-01-04amdfam10 boards: Use defaults for get_pci1234()Kyösti Mälkki
Note that while these boards had entry 0x0ff0 in comparison to 0x0ffc of the get_default_pci1234() initialisation, the implementation of get_pci1234() unconditionally overrides the first entry. Change-Id: I8bec612f84fe3c3a0c21fc1e10629368857e9c5e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Use defaults for get_pci1234()Kyösti Mälkki
All these boards use the same default initialiser. As this is initialized late after device enumeration, it can't really be used to alter platform configuration. Change-Id: I30fc0298081df0442ec4e9a527340b93a3cd6106 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30648 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop array bus_sb700Kyösti Mälkki
Only bus_sb700[0] is evaluated. Change-Id: Ie2cbbdebed3ae03da916d02919cd6a5d36f53562 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop array bus_sb800Kyösti Mälkki
Only bus_sb800[0] is evaluated. Change-Id: I8ae0e6facbbe302b71692cf98a0292ee7d3bdca1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30646 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop array bus_sp5100Kyösti Mälkki
Only bus_sp5100[0] is evaluated. Change-Id: I42a5040ea70a84fb674f2c616c6eba7b23dcdc29 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Add temporary pirq_router_bus variableKyösti Mälkki
It's expected that further analysis shows this to always evaluate to 0. Change-Id: I68599b961ca3b5e3652539c5d825a00444958d1b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Use PCI_DEVFN()Kyösti Mälkki
Change-Id: I301ed4024f1dd6fb2009d59b2992830d4f17ee2f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop array bus_sr5650Kyösti Mälkki
Values in the array are not used anywhere. Change-Id: Iee92f903db97533709d54d1f214f2f23a1fab06b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30638 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop array bus_rs780Kyösti Mälkki
Values in the array are not used anywhere. Change-Id: I608b8c2e21bc515c56a27982815c1da43f3bb976 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30637 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop const variable sbdn_sp5100Kyösti Mälkki
Change-Id: I8756a81324ba3d4374bb6b06f7f0ddade6ba530f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop variable sbdn_sr5650Kyösti Mälkki
It mirrors value of sysconf.sbdn. Change-Id: I3ea42280a1bdceffebb6b5c85aee18347734ee4e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30635 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop extern on bus_sr5650 and sbdn_sr5650Kyösti Mälkki
Change-Id: I3b95ec5746077b49cd6dca64d0f884a3d1c362fb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop variable sbdn_rs780Kyösti Mälkki
It mirrors value of sysconf.sbdn. Change-Id: I3cb611f1ea33da19e63523bc0fe99f2792eebc57 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop const variables sbdn_sb800 and sbdn_sb700Kyösti Mälkki
They evaluate to const zero and obscure PCI_DEVFN() use. Change-Id: I8bd8dced62094d5ee8e957241ac29ead054f5c05 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30632 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop extern on bus_rs780 and sbdn_rs780Kyösti Mälkki
Change-Id: I7dc943f3376e9b706d3d486231525df85f806858 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Call get_bus_conf() just onceKyösti Mälkki
It has to be called once before PIRQ and MP table generation. Change-Id: I238c6b4810404d320b36d4f6b4a161c1ff11c8d3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30630 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Add Makefiles and fix resourcemap.cKyösti Mälkki
Also remove global ramstage-y += get_bus_conf.c, this is specific to amdfam10. Change-Id: I49b604ebff6bcfe85518b2c3896ab798c3c7878d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop global bus_isa variableKyösti Mälkki
Value of the global is never evaluated. Change-Id: I74106b0f5f033053288882a5bcd3c1dba3235ac0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Declare get_pci1234() just onceKyösti Mälkki
Change-Id: I68bb9c4301c846fe2270cd7c434f35a79ab25572 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30627 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop unused mb_sysconf.hKyösti Mälkki
Change-Id: I819cfcda55995237a8431fdb3291274ab968cd3b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04amdfam10 boards: Drop AMD_SB_CIMXKyösti Mälkki
Copy-paste, boards do not set this. Change-Id: I4c0795a483948b1e357388a5ad639c3f1950bbc8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30625 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04util/superiotool: Add ITE IT8786E-IKyösti Mälkki
Based on IT8786E-I V0.4.1 datasheet with following remark: "Please note that the IT8786E-I V0.4.1 is applicable only to the D version." Signed-off-by: Kyösti Mälkki <kyosti.malkki@3mdeb.com> Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ibf6e290abb01ae1b6b28173a83e88d1d99663ad4 Reviewed-on: https://review.coreboot.org/c/30334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-04Documentation: Update 4.9 release notesPatrick Georgi
Change-Id: Ib1057541dc0decd98921f3c84de3c08f10cd802e Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/30344 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-04util/autoport/readme.md: Correct minor inconsistencyAngel Pons
Commit a5072af67d85 ("util/autoport: Use romstage.c instead of early_southbridge.c") changed where the SPD map is. Reflect that. Change-Id: Id0bd1778617371bac5921c4eae63d0beb088216c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/30655 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-04device: Replace ugly cases of dev_find_slot()Kyösti Mälkki
These few cases lacked a proper devfn parameter in the form of PCI_DEVFN(dev, fn). Change-Id: Iad0b214df12dee65360d07e887a960b0c73a3e4f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/26481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-01-04device: Introduce pcidev_on_root() and friendsKyösti Mälkki
Semantics of dev_find_slot() are ill in the sense that it only works after device enumeration has completed in ramstage. Plan is to declare it as deprecated. Introduce pcidev_on_root() and pcidev_path_on_root() functions to replace cases where this was called with static argument bus == 0. New implementation only walks the root bus of the PCI tree, while old one walked the entire linked list of devices. Introduce pcidev_path_behind() to replace cases where argument bus != 0. The required parent node is typically one of the PCIe root functions that you locate using pcidev_on_root() above. New forms are safe to use with early devicetree and before PCI bus numbers have been assigned. Change-Id: Ie20598d48b4cf6e35e45fc90804bad4728437fc6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/26447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-01-04src: Move {pci,pnp}_devfn_t to common 'device/pci_type.h'Elyes HAOUAS
Definitions of these types are arch-agnostic. Shared device subsystem files cannot include arch/pci_ops.h for ARM and arch/io.h for x86. Change-Id: I6a3deea676308e2dc703b5e06558b05235191044 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-04src: Get rid of device_tElyes HAOUAS
Use of device_t is deprecated. Change-Id: Ie05869901ac33d7089e21110f46c1241f7ee731f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30047 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-04util/gitconfig/pre-commit: Use clang-format to sanitise commitsEdward O'Callaghan
Use the `git-format' tool to sanitise coreboot commits such that they conform to coreboot's coding style. This fancy piece of machinary allows one to have LibFormat from Clang to automatically check your commit conforms to coreboot's coding style, fix any issues automatically and provides you a diff you may review and apply at your convenience. N.B. When the `clang-format' binary is not found we issue a warning that the test was skipped and carry on as usual. Hence, this is strictly non-enforcing at this current time. You may use it at your leisure. Change-Id: If49017ea82f0707efd47cae5978a286a9af8f3b7 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: https://review.coreboot.org/c/8037 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-04crossgcc: Update acpica to 20180927Stefan Reinauer
Update to latest version of iasl: (From the acpica.org changelogs) * Fixed a regression introduced in version 20180927 that could cause the compiler to fault, especially with NamePaths containing one or more carats (^). Such as: ^^_SB_PCI0 * Added a new remark for the Sleep() operator when the sleep time operand is larger than one second. This is a very long time for the ASL/BIOS code and may not be what was intended by the ASL writer. * Implemented detection of extraneous/redundant uses of the Offset() operator within a Field Unit list. A remark is now issued for these. For example, the first two of the Offset() operators below are extraneous. Because both the compiler and the interpreter track the offsets automatically, these Offsets simply refer to the current offset and are unnecessary. Note, when optimization is enabled, the iASL compiler will in fact remove the redundant Offset operators and will not emit any AML code for them. Change-Id: I46a1b1be44328aa2172f4741e9fd0c9b0f4e0430 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/c/28944 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-04crossgcc: Update software versionsStefan Reinauer
Update toolchain to the following software versions: o Python 3.5.1 -> 3.7.0 o LLVM 6.0.0 -> 7.0.0 o Expat 2.2.1 -> 2.2.5 o MPC 1.0.3 -> 1.1.0 o MPFR 3.1.5 -> 4.0.1 Change-Id: I66c6138c7b65c73a89b3cf980bb08950d8fffe6a Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/c/28887 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-04intel/e7505: Drop ECC scrubber codeKyösti Mälkki
This was already disabled and mostly incompatible with romstage having stack in CAR. Change-Id: I1fe02bef668a5bc8ce3d5a1d8090670752b10c3e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30621 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-04mb/google/sarien: Add settings for noise mitgationLijian Zhao
Enable acoustic noise mitgation for sarien platform, the slow slew rates are fast time dived by 8. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I5d38a1e03af08f106e2422a319b34c3fb54bdf28 Reviewed-on: https://review.coreboot.org/c/30448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-03sb/intel/*: Use common files for PCIe ACPIArthur Heymans
The result is that i82801{g,i,j}x now use the correct _PRT table for their root port number. Change-Id: I92bba3c669f3e6a44a42e19a88a33dfcfc2b9b42 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2019-01-03sb/intel/bd82x6x: Move pcie ACPI code to a common placeArthur Heymans
Change-Id: I45144f9c397ff9a0be011990ba33db9ffef351e7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2019-01-03mb/google/poppy/variants/nami: Add sku_ids for PantheonFrank Wu
Sync'ing the sku_ids list in the master sku sheet for Pantheon. BUG=b:121207221 BRANCH=firmware-nami-10775.B TEST=emerge-nami coreboot chromeos-bootimage Change-Id: Ic03c3a6fe238f2692ce15c45016115087380c0ca Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30412 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-01-03google/kukui: Initialize DRAM from romstageJunzhi Zhao
Add DRAM support for google kukui. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I1ed01404343745c883b22a648966327bdcabc5c2 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/28438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-01-03mediatek/mt8183: Add DDR driver of memory test partHuayang Duan
Write a range of memory with special pattern, and read it back to check whether the read value same as write. The test pattern include 8bit offset read write, 16 bit offset read write, 32bit offset read write, and cross testing. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui, and inits DRAM successfully with related patches. Change-Id: I30d5fbd3db2acf36e3058ba4f34558b981fba78c Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/28845 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>