| Age | Commit message (Collapse) | Author |
|---|
|
This patch uses common RTC library to enable
upper 128 byte bank of RTC RAM.
Change-Id: I55e196f6c5282d7c0a31b3980da8ae71764df611
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/18700
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This patch uses common RTC library to enable
upper 128 byte bank of RTC RAM.
Change-Id: Ibcbaf5061e96a67815116a9f7a03be515997be6d
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/18701
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Create Intel Common RTC code. This code currently only
contains the code for configuring RTC required in Bootblock phase
which has the following programming -
* Enable upper 128 bytes of CMOS.
Change-Id: Id9dfcdbc300c25f43936d1efb5d6f9d81d3c8453
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/18558
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Tested-by: build bot (Jenkins)
|
|
This patch use common PCR library to perform CRRd and CRWr operation
using Port Ids, define inside soc/pcr_ids.h
Change-Id: Iacbf58dbd55bf3915676d875fcb484362d357a44
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/18673
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch use common PCR library to perform CRRd and CRWr operation
using Port Ids, define inside soc/pcr_ids.h
Change-Id: Id9336883514298e7f93fbc95aef8228202aa6fb9
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/18674
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
IOSF_SB message space is used to access registers mapped
on IOSF-SB. These registers include uncore CRs (configuration
registers) and chipset specific registers. The Private
Configuration Register (PCR) space is accessed on IOSF-SB
using destination ID also known as Port ID.
Access to IOSF-SB by the Host or System Agent is possible
over PSF via the Primary to Sideband Bridge (P2SB). P2SB will
forward properly formatted register access requests as CRRd and
CRWr request via IOSF-SB.
Change-Id: I78526a86b6d10f226570c08050327557e0bb2c78
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/18669
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Update the I2C rise/fall timings based on newly measured values
on a new board with updated pull-up resistor values.
Touchscreen: rise time 98ns, fall time 38ms
Touchpad: rise time 111ns, fall time 41ns
TPM: rise time 112ns, fall time 34ns
BUG=b:35583133
BRANCH=none
TEST=Each I2C bus frequency was verified on a scope to be ~400MHz
Change-Id: Ibb3a15fa0cc862f36c1b9c63ac7847221020c4c0
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/19202
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
There is only one user for spi_get_config i.e. SPI ACPI. Also, the
values provided by spi_get_config are constant for now. Thus, get rid
of the spi_get_config call and fill in these constant values in SPI
ACPI code itself. If there is a need in the future to change these,
appropriate device-tree configs can be added.
BUG=b:36873582
Change-Id: Ied38e2670784ee3317bb12e542666c224bd9e819
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19203
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
When a platform is using postcar stage it's by definition not
tearing down cache-as-ram from within romstage prior to loading
ramstage. Because of this property there's no need to migrate
CAR_GLOBAL variables to cbmem.
Change-Id: I7c683e1937c3397cbbba15f0f5d4be9e624ac27f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19215
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Ib43e59e4d4ee5e48abf7177b36cb06fdae40bde9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18627
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Bottom five LSBs are used to store the running frequency
of memory clock.
Change-Id: I2dfcf1950883836499ea2ca95f9eb72ccdfb979c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19042
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The EC may take very long for the first command on a cold boot (~180ms
witnessed). Since this needs an incredibly long timeout, we do this
single command manually.
Change-Id: I3302622a845ac6651bc7f563370d8f0511836f94
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/18707
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I7b690d1f23ecf4083952c173be1d3a1246bc1593
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/18706
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This wasn't caught earlier because many boards select it manually.
Change-Id: I245ef8f44923b5384123bd549570db7c348e03b8
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/18771
Tested-by: build bot (Jenkins)
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Some renamings force us to update our code:
* Scan_Ports() moved into a new package Display_Probing.
* Ports Digital[123] are called HDMI[123] now (finally!).
* `Configs_Type` became `Pipe_Configs`, `Config_Index` `Pipe_Index`.
Other noteworthy changes in libgfxinit:
* libgfxinit now knows about ports that share pins (e.g. HDMI1 and
DP1) and refuses to enable any of them if both are connected
(which is physically possible on certain ThinkPad docks).
* Major refactoring of the high-level GMA code.
Change-Id: I0ac376c6a3da997fa4a23054198819ca664b8bf0
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/18770
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Updating headers corresponding to FSP 2.0.0
Below UPDs are added to FspmUpd.h
* PeciC10Reset
* PeciSxReset
rest of the changes are update to comments
CQ-DEPEND=CL:*340004,CL:*340005,CL:*340006
BUG=None
BRANCH=None
TEST=Build and test on Poppy
Change-Id: Id8ecea6fa5f4e7a72410f8da535ab9c4808b3482
Signed-off-by: Balaji Manigandan B <balaji.manigandan@intel.com>
Reviewed-on: https://review.coreboot.org/19109
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Enable SS link trunk clock gating & D3hot when device enters
D3 state.
Similarly disable SS link trunk clock gating & D3hot when device enters
D0 state
TEST=Build & boot Poppy board. Check working for XHCI wake when DUT
is in S3.
Change-Id: Ida2afa2e5f9404c0c15d7027480a28a003ad9a40
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/18879
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch cleans up the code by:
o adding necessary default definitions to Kconfig
o removing incorrect definitions from devicetree
o removing irrelevant entries from FMD file
devicetree.cb and minnow3.fmd carried over a lot of code from google/reef
which is not correct for Minnow3 hardware. Minnow3 is not intended to
boot Chrome OS and does not need Chrome related flash regions. The
erroneous code is removed.
These changes are the same as those done for leafhill in commit:
6a48923 mainboard/intel/leafhill: Clean up
This was tested by building with the new configuration and
booting to UEFI Payload
Change-Id: I620dcbcd622f9326917c74b2a38984d9e49cff2b
Signed-off-by: Brenton Dong <brenton.m.dong@intel.com>
Reviewed-on: https://review.coreboot.org/18963
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This fixes the following issues, with no functional changes:
ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
ERROR:SPACING: space required after that ',' (ctx:VxV)
WARNING:LONG_LINE_COMMENT: line over 80 characters
WARNING:SPACE_BEFORE_TAB: please, no space before tabs
ERROR:FUNCTION_WITHOUT_ARGS: Bad function definition
ERROR:SPACING: space prohibited before that close parenthesis ')'
WARNING:RETURN_VOID: void function return statements are not generally
useful
2 unfixed issues:
ERROR:COMPLEX_MACRO: Macros with complex values should be enclosed in
parentheses
Verified that the binary was the same before and after the changes.
Change-Id: Ie9afb50e268f4140872e39fe8bede231a43d5cc6
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/19078
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: York Yang <york.yang@intel.com>
|
|
All boards select INTEL_EDID, move it to nb folder.
Change-Id: I35f075a87f2d841856b208f9440cf41af6a3c8e6
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/19086
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This adds a gru libpayload config, that should fit all gru-based
devices such as kevin.
As gru-based devices are CrOS devices, select the associated config
to enable CrOS-specific features.
Change-Id: I6e79b763fc497c126612b8786a669a33b57ea29f
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/19137
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Move odt stretch into own function.
Apply workaround on SandyBridge C-stepping CPU only.
Apply odt stretch on all other CPU types.
Don't depend on empty DIMM detection, as in case one slot
is empty ref_card_offset is zero.
Change-Id: I4320f14e0522ec997b1f9f3b12ba2c2070ee8e9e
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/17616
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
quick_ram_check doesn't change contents of memory.
Run it in S3 resume, too.
Change-Id: Icaf3650fadbb3bb87d8c780a9e79737c3cf7eb06
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/17615
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
Silency noisy raminit logging by:
* Removing verbose logging from loops.
* Printing detailed summary at end of loop instead.
* Using the same scheme already present in some functions.
Change-Id: I412d81592436ac0d2422caf396c64e0c34acc2d1
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/17611
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Remove cross rank/cross channel dependency.
I guess this is a mistake that could lead to instabilities.
Tested on Lenovo T430 (Intel IvyBridge).
Change-Id: I899db907cd2d2197fd81eda4c4656fb1e570c18f
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/17610
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Linking should allow to link depending on possible future variants.
E.g. in Makefile.inc romstage-$(CONFIG_'VARIANT0') += gpio_variant0.c
etc.
Change-Id: I88b5ef8e12ac606751952a493f626e1b146e98f7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/19139
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Add package options to the CPU Kconfig that may be selected by the
mainboard's Kconfig file. Stoney Ridge is available in FP4 and FT4
packages and each requires a unique binaryPI image. Default to the
correct blob used by the northbridge by looking at the CPU's package.
Also modify Gardenia to select the right package.
See the Infrastructure Roadmap for FP4 (#53555) and FT4 (#55349) for
additional details for the packages.
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Reviewed-by: Marc Jones <marcj303@gmail.com>
(cherry picked from commit 7b8ed7b732b7cf5503862c5edc6537d672109aec)
Change-Id: I7bb15bc4c85c5b4d3d5a6c926c4bc346a282ef27
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/18989
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The term 'callout' has a specific meaning in AGESA, meaning
invoking the said function from AGESA / PI proper.
OemPostParams() does not fall into that category.
Change-Id: I0ad1cbf244501207af96e0ac415a5b80ced91052
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19141
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The term 'callout' has a specific meaning in AGESA, meaning
invoking the said function from AGESA / PI proper.
OemPostParams() does not fall into that category.
Change-Id: I45913d93323b3813fc35b1dd1fdca3d782d4b01f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19140
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
BUG=b:35583511
TEST=check i2c bus 0 initializes from ap console log
Change-Id: Ibb6709159f5ed28ad0b62397d2ddb504dec55167
Signed-off-by: Philip Chen <philipchen@google.com>
Reviewed-on: https://review.coreboot.org/19105
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Memory training data that is saved as part of S3 feature in SPI
flash can be used to bypass training on normal boot path as well.
When RegisterSize is 3 in the register playback tables, no register is
saved or restored. Instead a function is called to do certain things in
the save and resume sequence. Previously, this was overlooked, and the
pointer containing the current OrMask was still incremented by 3 bytes.
Change-Id: I7221a03d5a4e442817911ba4862e3c0e8fa4a500
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19041
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Using linker instead of '#include *.c'.
Change-Id: Ie1bc538aa29c4f18dd6f31a83d3da58f196f2078
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: https://review.coreboot.org/19081
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Sky Lake PCH contains two GSPI controllers. Using the common GSPI
controller driver implementation for Intel PCH, add support for GSPI
controller buses on Sky Lake/Kaby Lake.
BUG=b:35583330
Change-Id: I29b1d4d5a6ee4093f2596065ac375c06f17d33ac
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19099
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add support for GSPI controller in Intel PCH. This controller is
compliant with PXA2xx SPI controller with some additional registers to
provide more fine-grained control of the SPI bus. Currently, DMA is
not enabled as this driver might be used before memory is up (e.g. TPM
on SPI).
Also, provide common GSPI config structure that can be included by
SoCs in chip config to allow mainboards to configure GSPI
bus. Additionally, provide an option for SoCs to configure BAR for
GSPI controllers before memory is up.
BUG=b:35583330
Change-Id: I0eb91eba2c523be457fee8922c44fb500a9fa140
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19098
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Since there are multiple controllers in the LPSS and all use the same
frequency, provide a single Kconfig option for LPSS_CLOCK_MHZ.
BUG=b:35583330
Change-Id: I3c0cb62d56916e6e5f671fb5f40210f4cb33316f
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19115
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
In order to be able to use SPI TPM on x86, allow TPM_SPI to be used
with PC80_SYSTEM.
BUG=b:35583330
Change-Id: Ibe626a192d45cf2624368db42d369202a4003123
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19093
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
1. Use proper CAR semantics for global/static variables.
2. Use spi_* functions directly instead of using a global structure to
store pointers to those functions.
BUG=b:36873582
Change-Id: I1fc52ab797ef0cbd3793a387d68198efc5dde58c
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19114
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
BUG=b:35647967
TEST=boot from bob
Change-Id: Ib64107b17fb6e93dbe626ce92f3bc9da8b84784e
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-on: https://chromium-review.googlesource.com/452284
Commit-Ready: Caesar Wang <wxt@rock-chips.com>
Tested-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/19113
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
BUG=b:35775002
TEST=boot from bob
Change-Id: I6324f3c02da55a8527f085ba463cbb1f4fb5dc2e
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-on: https://chromium-review.googlesource.com/452283
Commit-Ready: Caesar Wang <wxt@rock-chips.com>
Tested-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/19112
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This is required to provide tsc freq required by timer library.
BUG=b:35583330
TEST=Verified that delay(5) in verstage adds a delay of 5 seconds.
Change-Id: I03edebe394522516b46125fae1a17e9a06fd5f45
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19094
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
These files are required to support recovery MRC cache hash
save/restore in romtage/ramstage.
BUG=b:35583330
Change-Id: Idd0a4ee1c5f8f861caf40d841053b83a9d7aaef8
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19092
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Even though the i2c spec has no minimum data hold time in fast
mode the trackpad vendor indicates 300ns is their minimum. However,
the topology of the board uses FET isolation to cross voltage
domains. Therefore, the default 300ns which should work isn't reflected
on the device side of the voltage isolation circuit. Therefore,
increase the data hold time to show an observed data hold time of
more than 300ns on the device side.
BUG=b:36469182
Change-Id: I1b70f2f53c5a29cc7cfd5035a71ca5811b3bcba0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19065
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
SD card detect pin is moved to GPP_E15 in the next build. Update
device tree and gpio config accordingly.
BUG=b:36012095
Change-Id: Ic0ff72cdcb0f1ca27abc7eb8da9ccd8a21b28522
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19107
Tested-by: build bot (Jenkins)
Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.corp-partner.google.com>
|
|
When using rise_time_ns and fall_time_ns there's currently not
a way to specify a target data hold time. The internal 300ns
value is used. However, that isn't always sufficient depending on
bus topology. Therefore, provide the ability to specify data
hold time in ns from devicetree, defaulting to default value if
none are specified.
BUG=b:36469182
Change-Id: I86de095186ee396099709cc8a97240bd2f9722c9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19064
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Calling disable_cache_as_ram() with valuables in stack is not
a stable solution, as per documentation AMD_DISABLE_STACK
should destroy stack in cache.
Change-Id: I986bb7a88f53f7f7a0b05d4edcd5020f5dbeb4b7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18626
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Officialy we enter with BIST in %eax, but %ebp is old backup register.
Note that post_code() destroys %al.
Change-Id: I77b9a80aac11ae301fdda71c2a20803d7a5fb888
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18625
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
As we now apply asmlinkage attributes to romstage_main()
entry, also x86_64 passes parameters on the stack.
Change-Id: If9938dbbe9a164c9c1029431499b51ffccb459c1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18624
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Function enables PCI MMCONF and XIP cache, it needs
to be called before giving platform any chance of
calling any PCI access functions.
Change-Id: Ic044d4df7b93667fa987c29c810d0bd826af87ad
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18623
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
pci_lookup_name might return NULL from using format_name internally
which could cause a crash when trying to print that value. We
check for NULL and print a more appropriate value in that case.
Change-Id: I499f0b5e1681f3926df0d8a325aab2c666ebd632
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Reviewed-on: https://review.coreboot.org/19089
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add 100 Mhz reflock default values for Ivybridge.
Some values are extracted from MRC, those marked as
guessed needs to be verified.
Tested on Lenovo T430 (Intel IvyBridge) and DDR3-1800.
Change-Id: Ife7f899b5fea02827ad998e9e8ab10ecaef61191
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/17609
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add debugging output to normalize_training.
Tested on Lenovo T420.
Change-Id: I1d787f7ead6cf35ee142a8848837840c91cb6967
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/17608
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
Add support for 100MHz reference clock on ivybridge.
Allows to use more frequencies than sandybridge.
Tested on Lenovo T430 (Intel IvyBridge) on DDR3-1800.
Change-Id: I780d34ded2c1e3737ae1af685c8c2da832842e7c
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/17607
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Use Ivy Bridge specific magic values on Ivy Bridge instead
of Sandy Bridge values.
The values are extracted from MRC.bin.
Should increase raminit stability.
Tested on Lenovo T430 (Intel IvyBridge).
Change-Id: I49fdfe5ae3e65704d22e083e8446e3f1069869bc
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/17606
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Update ABUILD_VERSION for the timeless & checksum parameters.
Change-Id: I96b4c027ccf3e5563dbf4598a0d1fb5e83a5985a
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/19034
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
- Add --checksum command line parameter to specify a base path and
filename for the checksums to be saved into.
- Save checksums of each platform into the specified file appended
with "_platform"
- Save a sha256 checksum of the sorted config.h into the base file
appended with "_config"
Change-Id: Id24dc4b10afbd35cdb8750f75b934419e6e80290
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/19033
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
- Remove document history. Since the document is now stored in git,
this is no longer needed.
- Fix spacing for the kconfig_lint help output
- Add license information to the bottom of the document.
Change-Id: I9854602a6ad9b4a99bf3988e1d7662b3b426e608
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/19075
Tested-by: build bot (Jenkins)
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This mainboard uses a LVDS connection for LCD panels. Apollo Lake SoC
provides a display controller with three independent pipes (1x eDP and
2x DP/HDMI). PTN3460 is an embedded DisplayPort to LVDS bridge device
that enables connectivity between an eDP source and LVDS display panel
(http://www.nxp.com/documents/data_sheet/PTN3460.pdf).
The bridge contains an On-chip Extended Display Identification Data
(EDIT) emulation for EDIT data structures.
This patch sets up PTN3460 to be used with the appropriate LCD panel.
Change-Id: Ib8fa79bb608f1842f26c1af3d7bf4bb0513fa94d
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/19043
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ifc065dca00ab3dfc65a314aaaf04dd2a7afcad0e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19040
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This was guarded because AGESA.h only defined it starting from fam15
header files. We can simply test if it has been defined.
The way coreboot currently handles this request, is to make the
allocation outside the heap, since heap may not be in CBMEM and thus
not available runtime. The acquired buffer from Allocate() would not
be found with Locate() or Deallocate(), so move the alloc_cbmem()
call for better code symmetry.
Change-Id: Ibf0066913a0b73e768488c3afbeb70139a3961eb
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19039
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Once we do CAR teardown between AmdInitResume() and
AmdS3LateRestore() we attempt to find our heap from the
temporary memory buffer instead of cache.
S3 resume is essentially broken anyways and this is not yet a
proper fix at all, but barely keeps system from halting on S3
resume.
Offset that seems arbitrary was taken from hudson/agesawrapper.c.
Change-Id: Idddf2ecde5a9d32d532071d6ba05032be730460c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19038
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Producer and consumer of these buffers now appear in same file.
Also add test for uninitialized NonVolatileStorage in SPI.
Change-Id: Ibbf6581a0bf1d4bffda870fc055721627b538b92
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19037
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
- Add some variables to allow server customizations.
- Verify that coreboot images and containers exist before trying to
remove them.
- Add a couple of convenience targets: clean & cleanall to remove
coreboot containers and images or ALL containers and images.
- Add docker-what-jenkins-does target to run a test build locally inside
a docker image.
- Add docker-jenkins-server target to test the server configuration and
run the jenkins docker image.
- Add docker-jenkins-shell and docker-shell targets to run the
coreboot-sdk and coreboot-jenkins-server images.
- Update the help.
Change-Id: I1896f33e7eddfe3248f44ae780de65ce50d5dd99
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/18004
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
pci_me_interface_scan was returning (via argument 'name') a pointer
to the interface name which was stored in a stack variable. This
caused part of the name to be printed as garbage stack data in some
situations if stack data was overwritten.
This moves the name buffer to the calling function so it can be accessed
before it gets overwritten.
Change-Id: I947a4c794ee37fe87e035593eaabcaf963b9875e
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Reviewed-on: https://review.coreboot.org/19066
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This save/restore facility operates on the same datablock.
Change-Id: I6e1f176adc2addbf2659c724f94c1b8d46d4838f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19026
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Only guard the parts that are problematic for romstage.
Also intention is to move AMD_S3LATE_RESTORE to ramstage in followup
work, it will need OemS3LateRestore.
Change-Id: Ie9c1fb3f3f0ab1951771ed829d4acdd8a59d8fbf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19025
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Specification says to do CAR teardown as part of AmdInitPost().
Move initializing the final AGESA heap storage to AmdInitEnv()
so the buffer is not invalidated without writeback.
Change-Id: I3a5d497d0e25ec291f722e9f089bc8928238c3f9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19024
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Logging makes it easier to track order of events as these
call-sites are scattered on various files.
Change-Id: I428547051fd8bf487e91415dc72ee03dba13029e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18718
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I79d4a4d1d5966ab46c8a9b9e9ca4e09e21ecfea7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18717
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The tis.c module is needlessly copying data to/from a 1260 byte
buffer on the stack. Each device's transport implementation (cr50.c
or tpm.c) maintains its own buffer, if needed, for framing purposes.
Therefore, remove the duplicated buffer.
BUG=b:36598499
Change-Id: I478fb57cb65509b5d74bdd871f1a231f8080bc2f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19061
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
The 'ordinal' variable is not used. Remove it.
BUG=b:36598499
Change-Id: I015a6633c0951980658b3c879e48bc84d604d62e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19060
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
There are unused structures/types in the tpm.h header file.
Remove them.
BUG=b:36598499
Change-Id: Iddc147640dcec70e80791846eb46298de1070672
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19059
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
The spi tis_sendrecv() implementation was always returning success
for all transactions. Correct this by returning -1 on error when
tpm2_process_command() returns 0 since that's its current failure
return code.
BUG=b:36598499
Change-Id: I8bfb5a09198ae4c293330e770271773a185d5061
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19058
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
The tpm_info object is a global, but its symbol does not need to
be exposed to the world as its only used within tpm.c.
BUG=b:36598499
Change-Id: Idded3dad8d0d1c3535bddfb359009210d3439703
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19057
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
In the case of start_transaction() failing the chip select is never
deasserted. Correct that by deasserting the chip select when
start_transaction() fails.
BUG=b:36598499
Change-Id: I2c5200085eb357259edab39c1a0fa7b1d81ba7b2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19056
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Move header and delete duplicates.
Change-Id: I0e1f5d9082626062f95afe718f6ec62a68f0d828
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/18903
Tested-by: build bot (Jenkins)
Tested-by: coreboot org <coreboot.org@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Currently only 256 bytes can be written at a time using the
acpigen_write_return_byte_buffer or acpigen_write_byte_buffer API's
and there can be cases where the buffer size can exceed this, hence
increase the number of bytes that can be written.
Change-Id: Ifaf508ae1d5c0eb2629ca112224bfeae1c644e58
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Sowmya V <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/18966
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
With COREBOOT_BUILD_DIR set, nvramcui & coreinfo were getting built
in the wrong location, causing those builds to fail.
Also, because they were built in the wrong location, the build failures
were not detected by jenkins which was looking for the junit.xml files
under the payloads directory.
Change-Id: I9d81ebabebe5d8b5f79ae63f8a5f388430e06754
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/19069
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
It's confusing to have these Kconfig symbols for non-Intel boards.
Change-Id: I4903c816258e5d2b8ed8704295b777aee175e8bc
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/18795
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This patch fix apollolake devices unable to boot with
coreboot debug image issue.
Change-Id: I28943100ba19dec1e540fdbba1c1e110c6af1488
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/19036
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Fix the warning below.
```
util/cbfstool/ifwitool.c:551:2: warning: Value stored to 'offset' is never read
offset = read_member(data, offset, sizeof(h->fit_tool_version),
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
Found-by: scan-build from clang 3.8.1
Change-Id: I6c322a335a371a20561b32e04e7dcc7310dab607
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/18667
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
There's a missing closing brace in fillbits function of jpeg.c which
caused an avalanche of compilation errors.
This was introduced in commit
491c5b60 (src/lib: Move assignment out of if condition)
which was reviewed in gerrit at https://review.coreboot.org/18761 and it
prevents coreboot from building when CONFIG_BOOTSPLASH is set.
Change-Id: Ie10b774875fc25ce2ff613c542c15870e780a761
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Reviewed-on: https://review.coreboot.org/19032
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I074dc7d5edbe3444f841e67a5644938e23118942
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18716
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I00bd4d895b2585235bf5b3edd23fbcddba69d31e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18714
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Adjust gpio settings according to the hardware layout.
Change-Id: I2f440e863c2e6f59298c500ac5aefa3b7386bcdf
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/18995
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Wake On Voice stream capture configuration is mono. It is sufficient
to keep DMIC_CLK_A1 on in S0ix; so, turning off DMIC_CLK_B1.
Power saving should be visible in the boards which has more
than one DMIC connected.
BUG=None
BRANCH=None
TEST=WoV and quad channel DMIC capture works
Change-Id: Ic46d4c7b30b945eba47a05d78386f48e4a675a03
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-on: https://review.coreboot.org/19018
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com>
Tested-by: build bot (Jenkins)
|
|
- Fix clean target to pass if output doesn't exist
- Make sure $(RM) is actually defined
Change-Id: Ibcdb0e329084f58b27c3f53213a237d02c922a51
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/18998
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Kocialkowski <contact@paulk.fr>
Tested-by: build bot (Jenkins)
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add the binaryPI file for the FT4 package and add SMU firmware to
be consumed by fanless OPNs.
Change-Id: I1c9b5ded6b494fac1553cc2ec7756a7a47386ecf
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/18988
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Use the new parameters in amdfwtool to include the additional SMU
firmware into amdfw.rom.
Change-Id: Ib44860780c8d5fb00c47f775a2a83b82ff3e1821
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/19002
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change the current implementation so that multiple PSP directory
structures are not included, saving 448 KB.
AMD created a mechanism so that multiple generations of APUs, in
identical packages, may be supportable in one BIOS image. The PSP
identifies the correct directory table by checking one of two
pointers in the Embedded Firmware structure. Coreboot doesn't
implement this capability, however it has been constructing
amdfw.rom with two identical directory tables and two copies of
each PSP blob.
Tested on Bettong (Merlin Falcon / Carrizo) and Jadeite (Stoney).
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Reviewed-by: Marc Jones <marcj303@gmail.com>
(cherry picked from commit 11dfc3f621344db66d92b61d72927128ea48685f)
Change-Id: I139f3bfdb319af803fef64e7bd848e95945f41aa
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/18990
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
For systems using Chrome OS, place the amdfw outside of cbfs control.
The firmware must go to a fixed position at an offset of 0x20000 into
the flash device.
Potentially improve by adding a warning or error message for the
condition when sizeof(amdfw) + sizeof(cbfs and metadata) > sizeof(flash).
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Reviewed-by: Marc Jones <marcj303@gmail.com>
(cherry picked from commit 2d9d631b39d7850576438a5b0979936bd33893e1)
Change-Id: I38029bc03e5db260424cca293b1a7bceea4d0d75
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/18435
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The Stoney Ridge program has OPNs that are considered fanless. These
APUs are strapped to search for unique SMU firmware, indicated by
Type[8]=1 in the directory table entry.
Add new options to amdfwtool and include the blobs in the build with
the appropriate bit set in the Type encoding.
Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Original-Reviewed-by: Marc Jones <marcj303@gmail.com>
(cherry picked from commit 8df0d6847c39bb021271983018ac6f448f9ff9da)
Change-Id: I4b80ccf8fd9644f9a9d300e6c67aed9834a2c7a7
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/18991
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
In builds without CONFIG_VBOOT_SEPARATE_VERSTAGE, verstage files are
linked directly into the bootblock or the romstage. However, they're
still compiled with a separate "libverstage" source file class, linked
into an intermediate library and then linked into the final destination
stage.
There is no obvious benefit to doing it this way and it's unclear why it
was chosen in the first place... there are, however, obvious
disadvantages: it can result in code that is used by both libverstage
and the host stage to occur twice in the output binary. It also means
that libverstage files have their separate compiler flags that are not
necessarily aligned with the host stage, which can lead to weird effects
like <rules.h> macros not being set the way you would expect. In fact,
VBOOT_STARTS_IN_ROMSTAGE configurations are currently broken on x86
because their libverstage code that gets compiled into the romstage sets
ENV_VERSTAGE, but CAR migration code expects all ENV_VERSTAGE code to
run pre-migration.
This patch resolves these problems by removing the separate library.
There is no more difference between the 'verstage' and 'libverstage'
classes, and the source files added to them are just treated the same
way a bootblock or romstage source files in configurations where the
verstage is linked into either of these respective stages (allowing for
the normal object code deduplication and causing those files to be
compiled with the same flags as the host stage's files).
Tested this whole series by booting a Kevin, an Elm (both with and
without SEPARATE_VERSTAGE) and a Falco in normal and recovery mode.
Change-Id: I6bb84a9bf1cd54f2e02ca1f665740a9c88d88df4
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18302
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch attempts to finish the separation between CONFIG_VBOOT and
CONFIG_CHROMEOS by moving the remaining options and code (including
image generation code for things like FWID and GBB flags, which are
intrinsic to vboot itself) from src/vendorcode/google/chromeos to
src/vboot. Also taking this opportunity to namespace all VBOOT Kconfig
options, and clean up menuconfig visibility for them (i.e. some options
were visible even though they were tied to the hardware while others
were invisible even though it might make sense to change them).
CQ-DEPEND=CL:459088
Change-Id: I3e2e31150ebf5a96b6fe507ebeb53a41ecf88122
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18984
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
No board has ever tried to combine CONFIG_SEPARATE_VERSTAGE with
CONFIG_VBOOT_STARTS_IN_ROMSTAGE. There are probably many reasons why
this wouldn't work (e.g. x86 CAR migration logic currently always
assumes verstage code to run pre-migration). It would also not really
make sense: the reason we use separate verstages is to decrease
bootblock size (mitigating the boot speed cost of slow boot ROM SPI
drivers) and to allow the SRAM-saving RETURN_FROM_VERSTAGE trick,
neither of which would apply to the after-romstage case. It is better to
just forbid that case explicitly and give programmers more guarantees
about what the verstage is (e.g. now the assumption that it runs pre-RAM
is always valid).
Since Kconfig dependencies aren't always guaranteed in the face of
'select' statements, also add some explicit compile-time assertions to
the vboot code. We can simplify some of the loader logic which now no
longer needs to provide for the forbidden case. In addition, also try to
make some of the loader logic more readable by writing it in a more
functional style that allows us to put more assertions about which cases
should be unreachable in there, which will hopefully make it more robust
and fail-fast with future changes (e.g. addition of new stages).
Change-Id: Iaf60040af4eff711d9b80ee0e5950ce05958b3aa
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18983
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Currently, src/vboot/bootmode.c gets compiled even if vboot is disabled.
It seems that this was only done to support calling certain
developer/recovery mode functions in this case. There is no reason to
compile the whole file for that -- we can just differentiate with a
stub in the header instead, which is what other parts of coreboot
usually do for cases like this.
Change-Id: If83e1b3e0f34f75c2395b4c464651e373724b2e6
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18982
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This callback was only required for a single mainboard, and it can
easily be moved to mainboard-specific code. This patch removes it from
the global namespace and isolates it to the Jecht board. (This makes
it easier to separate vboot and chromeos code in a later patch.)
Change-Id: I9cf67a75a052d1c86eda0393b6a9fbbe255fedf8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18981
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The virtualized developer switch was invented five years ago and has
been used on every vboot system ever since. We shouldn't need to specify
it again and again for every new board. This patch flips the Kconfig
logic around and replaces CONFIG_VIRTUAL_DEV_SWITCH with
CONFIG_PHYSICAL_DEV_SWITCH, so that only a few ancient boards need to
set it and it fits better with CONFIG_PHYSICAL_REC_SWITCH. (Also set the
latter for Lumpy which seems to have been omitted incorrectly, and hide
it from menuconfig since it's a hardware parameter that shouldn't be
configurable.)
Since almost all our developer switches are virtual, it doesn't make
sense for every board to pass a non-existent or non-functional developer
mode switch in the coreboot tables, so let's get rid of that. It's also
dangerously confusing for many boards to define a get_developer_mode()
function that reads an actual pin (often from a debug header) which will
not be honored by coreboot because CONFIG_PHYSICAL_DEV_SWITCH isn't set.
Therefore, this patch removes all those non-functional instances of that
function. In the future, either the board has a physical dev switch and
must define it, or it doesn't and must not.
In a similar sense (and since I'm touching so many board configs
anyway), it's annoying that we have to keep selecting EC_SOFTWARE_SYNC.
Instead, it should just be assumed by default whenever a Chrome EC is
present in the system. This way, it can also still be overridden by
menuconfig.
CQ-DEPEND=CL:459701
Change-Id: If9cbaa7df530580a97f00ef238e3d9a8a86a4a7f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18980
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
VBOOT_DYNAMIC_WORK_BUFFER and VBOOT_STARTS_IN_ROMSTAGE are equivalent in
practice. We can't have a dynamic work buffer unless we start in/after
romstage, and there'd be no reason to go with a static buffer if we do.
Let's get rid of one extra option and merge the two.
Change-Id: I3f953c8d2a8dcb3f65b07f548184d6dd0eb688fe
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18979
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
CHIPSET_PROVIDES_VERSTAGE_MAIN_SYMBOL allows the SoC directory to
provide its own main() symbol that can execute code before the generic
verstage code runs. We have now established in other places (e.g. T210
ramstage) a sort of convention that SoCs which need to run code in any
stage before main() should just override stage_entry() instead. This
patch aligns the verstage with that model and gets rid of the extra
Kconfig option. This also removes the need for aliasing between main()
and verstage(). Like other stages the main verstage code is now just in
main() and can be called from stage_entry().
Change-Id: If42c9c4fbab51fbd474e1530023a30b69495d1d6
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18978
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Some Chrome OS boards previously didn't have a hardcoded vboot
configuration (e.g. STARTS_IN_BOOTBLOCK/_ROMSTAGE, SEPARATE_VERSTAGE,
etc.) selected from their SoC and mainboard Kconfig files, and instead
relied on the Chrome OS build system to pass in those options
separately. Since there is usually only one "best" vboot configuration
for a certain board and there is often board or SoC code specifically
written with that configuration in mind (e.g. memlayout), these options
should not be adjustable in menuconfig and instead always get selected
by board and SoC Makefiles (as opposed to some external build system).
(Removing MAINBOARD_HAS_CHROMEOS from Urara because vboot support for
Pistachio/MIPS was never finished. Trying to enable even post-romstage
vboot leads to weird compiler errors that I don't want to track down
now. Let's stop pretending this board has working Chrome OS support
because it never did.)
Change-Id: Ibddf413568630f2e5d6e286b9eca6378d7170104
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/19022
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
