Age | Commit message (Collapse) | Author |
|
The amdht code currently relies on an idiosyncratic ASSERT() macro,
which actually doesn't do anything right now, and even it did would only
print a janky error message. Replace this with the normal ASSERT() macro
from <assert.h>. The default behaviour now is to print an error message
but do nothing else, and failed assertions will only halt if you enable
FATAL_ASSERT, in which case, well, you asked for it.
Change-Id: I6db7565171a345f9afbc9fb37cff8fda58f942df
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1402076
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34375
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
There will be a possible out of bounds array access if
power_limit_1_time == ARRAY_SIZE(power_limit_time_sec_to_msr), so
prevent that in the index check. This issue was fixed for other cpus in
commit 5cfef13f8d (cpu/intel: Fix out-of-bounds read due to off-by-one
in condition). Based on the discussion for that commit, also remove the
magic constant 28 in favour of the index of the last array element.
Change-Id: Ic3f8735b23a368f8a9395757bd52c2c40088afa1
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1229673
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The bdk_phys_to_ptr() function converts a uint64_t address to a void *
pointer. Judging by the comments, the old implementation had a check
that would refuse to convert a null pointer, which required several
workarounds when trying to convert the address 0 to a pointer. This
isn't the case for coreboot though, which implements this function
as a simple (void *) cast, so we can remove the old workarounds.
Change-Id: I6537d1699e6726c1fb155d69a51e14da856232de
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1393962
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Ensure that best_en_idx is within bounds before accessing the _en array.
Change-Id: Ifa6259e28875a8cf8199896bda7982370ccaa277
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1393971
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34593
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The total number of errors is only needed after a final tuning run at the
end of this function, so we can remove this unneeded store for earlier
runs.
Change-Id: I62adb38ccba98d90bcf8ccd13998762b9b694111
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1393967
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The virt machine is special as it doesn't emulate flash and it puts
the coreboot.rom at start of DRAM. The payload loader doesn't know
about CBFS in DRAM and overwrites the CBFS while decompressing
payloads, resulting in undefined behaviour.
Mark the region as SRAM to make sure the payload won't
overwrite the CBFS while decompressing.
As payload is always decompressed to DRAM, it wouldn't touch
SRAM memory regions.
Change-Id: I36a18cb727f660ac9e77df413026627ea160c1e1
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33426
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Fix regression introduced in bd4bcab
"lib: Rewrite qemu-armv7 ramdetect".
The detected DRAM size is in MiB, thus needs to adjusted accordingly
before passed to ram_resource.
Wasn't seen earlier as everything works, except payload loading.
Change-Id: I4931372f530e7b4e453a01e5595d15d95a544803
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
It would be useful if we have at least one "new" board on which we
actually built vboot, in order to notice if something breaks.
Change-Id: I16c7867e3f0f4e1f2e6ae3918c30789e39881b85
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34609
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Change-Id: I0ce22da3d201c2443bb5a7fcfd779c2c6ee71577
Signed-off-by: Pavel Sayekat <pavelsayekat@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34602
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 598af2e2c2785c00eb4290cdcefe1082b2a6f858.
Reason for revert: This commit breaks every board with VBOOT enabled
if the platform is apollolake, broadwell, skylake, baswell, baytrails
or icelake. The reason is, that the SoC selects
VBOOT_MUST_REQUEST_DISPLAY by default, and this has a dependency now
on VBOOT_MAY_SKIP_DISPLAY_INIT. This will only be auto-selected if
it is a CHROMEOS platform.
Change-Id: I3872d9aa993326ded135d8a5d950d5b1b1eddf34
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34308
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Values taken from NCT5539D datasheet V1.1 (June 30th, 2015).
Change-Id: I7e979bde53ce3dac1a4f74e7e51a3c6a0149051c
Signed-off-by: Pavel Sayekat <pavelsayekat@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33842
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 46445155ea21b0aa9106e12a00b9b1d89887a461.
Reason for revert: Breaks coreboot. Either no UART working or the
complete boot process stops.
Platform: Intel Apollolake, tested on Up Squared
Change-Id: If581f42e423caa76deb4ecf67296a7c2f1f7705d
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34307
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Print an error message and return if an invalid QUP or BLSP is
encountered. This prevents a possible null pointer dereference
of spi_clk.
Change-Id: I374e15ce899c651df9c2d3e0f1ec646e33d4bdb2
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1401086
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34523
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Consider the following assignment:
u64 = s32
For positive values this is fine, but if the s32 is negative, it will be
sign-extended in the conversion to a very large unsigned integer. This
manifests itself in two ways in the following code:
First, gpu_pipe{a,b}_port_select are defined as int, and can have the
values 1 or 2. In the case when they have the value 2, the shift 2 << 30
will be a negative number, making it susceptible to the sign-extension
problem above. Change these variables to something more reasonable like
a uint8_t, which is unsigned.
Second, in any bit shift, any variable with width less than an int will
be implicitly promoted to an int before performing the bit shift.
For example, the variable gpu_pipea_power_on_delay is a uint16_t, and if its
highest bit is set, the shift gpu_pipea_power_on_delay << 16 will become
negative, again introducing the above problem. To prevent this, cast all
smaller variables to a u32 before the shift, which will prevent the
implicit promotions and sign extensions.
Change-Id: Ic5db6001504cefb501dee199590a0e961a15771b
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1229699, 1229700, 1229701, 1229702
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34487
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:112267918
TEST=Ran make help and verified build directory is no longer created
Change-Id: I4bb066b5c3b3d9a7bb19291ef928042b90f10440
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34525
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The build directory might not exist in the src dir.
BUG=b:112267918
TEST=make what-jenkins-does
Change-Id: I2d4fa6cc455592f92070796cd065cd66646d5ba9
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The logic for the calculation of plld.m is rather complicated, so do a
sanity check that it is non-zero before doing the division.
Change-Id: I60f49b8eed47a3de86713304bde7a4d3f3d935dd
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1260981
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34572
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
volt_str is used to print information about the RAM configuration
in report_common_dimm(), so let's print out "unknown voltage" if the
voltage isn't recognized rather than a garbage value.
Change-Id: I8e85917fd682e166172fbf10597bde4a8a11dfc7
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1393958, 1393982
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34576
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Tested on Lenovo ThinkPad T440p.
Change-Id: I54b0c9dbb64819f0f502783b632470d27ed0b2b1
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34358
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change the fletcher32 checksum calculation to match PSP and AGESA
implementations.
The symptom of the failure has only been noted in Picasso's BIOS
Directory Table, when a BIOS binary image of different sizes were
passed to amdfwtool. The PSP halts the boot process with the bad
BDT checksum, and if allowed to continue, AGESA asserts later due
to a failed BDT verification.
This version has been verified to produce the same result as found
at https://en.wikipedia.org/wiki/Fletcher%27s_checksum.
TEST=Build apu2, bettong, grunt and verify before/after amdfw.rom
is unchanged.
Change-Id: I2ba2c49a70aa81c15acaab0be6b4c95e7891234f
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34574
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Dorp device support keyboard backlight, so enable it.
BUG=b:138413969
BRANCH=octopus
TEST=emerge-octopus coreboot
Change-Id: If0c7b22b4be2a5d5216404a6944ac887883e9a47
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Marco Chen <marcochen@google.com>
|
|
Change-Id: Id974a4bb84b7d5caddece04f93bf4e830d15b576
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34466
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove a spurious reference: the `optype` field is already the pointer
we want.
Change-Id: I65eb3a519db9037c84750c5d40e3f19a1e360361
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34596
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I4cd03e043e1bc2795b98d6ec2f88efa5b50d872b
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
* Move armv7 RAM dection to a common place
* Enable it for all emulated platforms
* Use 32bit probe values and restore memory even on failure
* Use the new logic on the following boards:
** qemu-armv7
** qemu-riscv
Tested on qemu-system-riscv:
Fixes kernel panic due to wrong memory limits reported.
Change-Id: I37386c6a95bfc3b7b25aeae32c6e14cff9913513
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
We recently added the --asserts option to set asserts as fatal in abuild
but didn't add the flag to getopts, so it gets rejected as an invalid
argument.
Change-Id: Ic70e9a2bec039955cf62c175875598773ade2d3d
Signed-off-by: Martin Roth <martinr@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add VBT 8.0.1038 binary.
Panel #10 is modified to support the 1200x1920 LCD panel.
This panel is configured as default.
LCD and HDMI are working fine.
BUG=N/A
TEST=booting Facebook FBG1701
Change-Id: If327e4e071df61b02fcec45213c2b700320ef269
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Use latest OpenSBI that include support for dynamic firmware loader.
That allows us to use OpenSBI similar to BL31 on aarch64:
* coreboot loads the payload
* coreboot loads OpenSBI ELF right before payload handoff
* OpenSBI does platform lockdown and provides runtime services
* OpenSBI hands control to already loaded payload
The uncompressed compiled OpenSBI code is about 41KiB.
Required to boot GNU/Linux on qemu-riscv as some instructions needs to be
emulated by SBI.
Change-Id: If7ed706bc54a75fb583a8aa46fdd61ae7d18c546
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34139
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Set FD bit if xHCI is disabled in devicetree.
Change-Id: I3d08ded10daea6d86857ebbbf3f8dcc85ebe9df4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add f81803A plus the capability to control the fan with any fintek SIO.
This will be done through a common API, though currently only F81803A will
have it implemented.
BUG=none.
TEST=Tested later with padmelon board.
Change-Id: I3d336e76bccc38452b1b1aefef5d4a4f7ee129a8
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33623
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Also don't define the default as this result in spurious lines in the
.config.
This also cleans up an unused Kconfig file.
In the generated config.h CPU_QEMU_POWER8 is gone as expected and
ARCH_RAMSTAGE_PPC64 moves a few lines, but the value stays the same.
Change-Id: I70b64e49e1ce07b8f30d9bbc493272bdfb3bb0bf
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31314
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ic35a901c8272928a0389b38a74f4eac74977a080
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Load SSPM firmware and boot up SSPM.
BUG=b:80501386
BRANCH=none
Test=We can see "SSPM is alive" in ATF stage if SSPM enabled and ipi success
Change-Id: I9285034fc8ce38b40134f5eb7b986a663175e620
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31835
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We are treating reg_val like a bit mask, so use bitwise or instead of
boolean or, and use |= to enable certain bits instead of overwriting the
whole variable.
Change-Id: Ia8c0ea5a58e25b3b58ed82caba20f8e49a30fb68
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1287070
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Based on updated schematics, change polarity of USI_INT, and add
the reset and enable GPIOs to the touchscreen ACPI node. The stop
GPIO can't be used with the current implementation of _ON, as the
way it's wired will cause power sequencing to fail.
BUG=b:137133194, b:138240502
BRANCH=none
TEST=Compiles, don't have next board rev to test with
Change-Id: I1dfb8e649418e4c5e9b897fb4bc11393adc21ea2
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
Change-Id: I5aa3bb2c72dcf127d418c989f6b63c9b1f412f08
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34557
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
JENKINS_ABUILD_OPT is passed in abuild's command line
Change-Id: I5e7fbb77a3c6592a4414a6c1e3f7556c7e3a824c
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
|
|
This enables fatal asserts, which can be useful to get better
diagnostics by the build tools (both compilers and static analysis.)
Change-Id: I1e1653f465fe1f545878d6eec83b8645dc17d9cb
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
|
|
The abuild command line can vary a lot depending on options and the line
became unwieldy (plus, it's on two lines because we run abuild twice),
so factor it out into a variable.
Change-Id: I102756fb95c93f542d534610bf9737a13ac1ad62
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
|
|
depthcharge prefers knowing where its input comes from
BUG=b:137378326
BRANCH=none
TEST=ctrl-d / enter to enter dev-mode works now.
Change-Id: I74b5be18c3583be17c73950ced93fad883690090
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34451
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
So far the bootsplash is only correctly rendered if the framebuffer is
set up as 1024x768@16.
Different resolutions did not show anything, differnent depth resulted
in the distorted images.
This commit removes this limit by using the actual framebuffer resolutions
and combines the code for x86 and yabel.
For the moment the bootsplash is still limited to VGA-OptionROM
framebuffer init.
It was tested in 1280x1024@32 on the wip razer blade stealth using the
intel vgabios.
Change-Id: I5ab7b8a0f28badaa16e25dbe807158870d06e26a
Signed-off-by: Johanna Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34537
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Old comment did not match the pattern required
to not flag the fall-through as an error.
Change-Id: I2afaca969c295a5dc4389dad0ce898c87bb841a6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-by: Johanna Schander <coreboot@mimoja.de>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Pass `XGCCPATH` instead of individual programs as that is what the
Makefile expects.
Change-Id: I3267ec5259e9d37b2f3b0b8c126d173fc8b5a3ca
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34556
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
It can be useful to pass along to external projects, e.g. payloads.
Change-Id: I61c7bb162e2737a562cbef08b32ebbafd9cf1cb0
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Tianocore payload uses nasm. Supply it in the coreboot toolchain
instead of relying on system version.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I086cbe6c46f7c09b2a7a83e177b32fd1bdf99266
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33024
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Changes: https://cmake.org/cmake/help/v3.15/release/3.15.html
Change-Id: Ic9db9050bec45d33d56ee53e3692276494f306de
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33053
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Changes: https://acpica.org/node/171
Change-Id: I3883718623e4a23a901a446f738a9e8c988d8433
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: If3611494228a9228b0b323038ba1e884a1bde10f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33825
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I2d4a93fa43cf662685d4c439bcff04e338d51375
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32077
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I7a85ad171fa259e0dcb0019941d735ef41511737
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32754
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This cleans up .config file from unused wilco symbols.
Change-Id: I813d3fe57b97e2c1ba67e1e3674de256c2529029
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34539
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I96d423720fbe67c067373436ad250edf37939e99
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Prevent implicit cast to pointers.
The compiler doesn't warn about the conversion from
integer to pointer without a cast, because SA_DEV_ROOT
is literally '0' and there seems to be an exception
for that conversion.
Change-Id: I64fc156e3b9f578414ad03a00edb7cf3e33205c1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Commit 71756c2 soc/intel: Expand SA_DEV_ROOT for ramstage
removed SA_DEV_ROOT expanding to device pointer. We missed
the case here, use __SIMPLE_DEVICE__ instead for the file.
Change-Id: I4331298837afa3b8c8321da610f99f8f5fa54737
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Remove old hda_verb.c code copied from intel/kblrvp7, as it's
been superseded by the common block HDA implementation.
Fixes a null pointer error preventing the HDA codecs from being
initialized, as found in Coverity CID 1403651.
Test: build/boot Librem 13v2, verify functional audio
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Change-Id: I2fd5363aad027f215f93964bc6a85f00fea86c88
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34531
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I8e36dc1553faa618aa852c06861029b4c0bdb27a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Also including <types.h>, is supposed to provide stdint and stddef.
Change-Id: Iab605f6be4a48c10fa5aae7a1222520149ad1392
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33691
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Also including <types.h>, is supposed to provide stdint and stddef.
Change-Id: Id6d881055826044d04843ba165641131b9111342
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33690
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Also including <types.h>, is supposed to provide stdint and stddef.
Change-Id: I812d468c68b31917da5d406e2fb3b84bc6331b69
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The bus variable doesn't live outside the scope of this function, and is
only used as a convenient way for passing the pointers to all the
sub-functions, so it doesn't need to be allocated. Put it on the stack
instead.
Change-Id: I4370d77445952731d20f7d9a91803612f4d21aef
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1294801
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The "internal PME" wake-up source could be from integrated LAN,
HD audio/audio DSP, SATA, XHCI, CNVi, or an ME maskable host wake.
chromium:1680839 adds USB port details to the wake-up when the
XHCI causes the wake-up. Expand the logging for wake-up details to
identify and log the other wake-up sources with more details. Note that
wake on Integrated LAN (GbE), SATA, and ME Maskable Host Wake are not
in use on Hatch, so these will not be tested.
BUG=b:128936450
BRANCH=none
TEST=``FW_NAME=hatch emerge-hatch chromeos-ec depthcharge vboot_reference
libpayload coreboot-private-files intel-cmlfsp coreboot-private-files-hatch
coreboot chromeos-bootimage``
Ensure /build/hatch/firmware/image-hatch.serial.bin has been built.
Program image-hatch.serial.bin into the DUT using flashrom.
Switch the DUT to the console (Ctrl-Alt-F2, or use the AP console via
servo).
XHCI USB 2.0
* Plug a USB keyboard into a USB-A port
* ``powerd_dbus_suspend``
* Verify low power mode by issuing the ``powerinfo`` command on the EC
console (via servo). Expect to see ``power state 4 = S0ix``.
* Press a key on the USB keyboard
* ``mosys eventlog list`` shows:
12 | 2019-06-26 14:52:23 | S0ix Enter
13 | 2019-06-26 14:53:07 | S0ix Exit
14 | 2019-06-26 14:53:07 | Wake Source | PME - XHCI (USB 2.0 port) | 3
15 | 2019-06-26 14:53:07 | Wake Source | GPE # | 109
CNVi (connected to Wi-Fi):
* Enable wake on disconnect via ``iw phy0 wowlan enable disconnect``
* Set up a hotspot on an Android phone
* Connect the Chromebook to th hotspot
* ``powerd_dbus_suspend``
* Verify low power mode by issuing the ``powerinfo`` command on the EC
console (via servo). Expect to see ``power state 4 = S0ix``.
* Turn off the hotspot on the phone
* ``mosys eventlog list`` shows:
8 | 2019-07-11 10:58:17 | S0ix Enter
9 | 2019-07-11 10:59:17 | S0ix Exit
10 | 2019-07-11 10:59:17 | Wake Source | PME - WIFI | 0
11 | 2019-07-11 10:59:17 | Wake Source | GPE # | 109
XHCI USB 3.0
* TBD
HD Audio
* TBD
Change-Id: I2c71f6a56b4e1658a7427f67fa78af773b97ec7f
Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34289
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
add two sku ids of bard:
0x1009CE0
0x1009CE2
BUG=b:137892804
TEST=emerge-nami coreboot
Change-Id: I299ccb36739d83e38f37e0b2cbba44c34343c975
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34430
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The perennial problem with u16 << 16 strikes again - the u16 is
implicitly promoted to an int before the shift, which will then become
negative if the highest bit of the u16 was set. Normally this isn't much
of a problem, but in this case tegra_dsi_writel() expects a 64 bit integer
for that argument, and so it will be sign-extended to a very large
unsigned integer if it is negative. Cast bytes to a u32 beforehand to
prevent the implicit promotion and thus this problem.
Change-Id: Iaf0fb1040ccafafde0093e9bb192c802b86cb2ac
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1294800
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34529
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Check that tx is not null before accessing it, similar to the previous
if statements.
Change-Id: I820cb670026bb12a54c63227aa04e778fd49c66a
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1294805
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34530
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This multiplication is of the form u64 = u32 * u32. Despite being stored
in a 64 bit variable, the intermediate value is still calculated using
32 bit math, which could possibly overflow. Cast one of the variables to
a u64 to ensure it uses 64 bit math instead to avoid this.
Change-Id: Ib08624812e933fdca5a51150ab36d3be49383326
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1375443
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Use explicit simple PCI config accessors here.
Change-Id: Ifa3814fdd7795479ca5fdbfc4deb3fe8db9805f3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34519
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch creates new kconfig option to bring display over external
PCI based GFX card. This kconfig to select required kconfig which are
not default selected by VGA_ROM_RUN to launch legacy oprom from pci
based GFX card.
Change-Id: I8ebde69e38defbe3321eb5e5bbd632c209ae2cd8
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
Add bullet points for to achieve that.
Change-Id: Iea6811147ddad4e6e3372ca1ccd8fdaf8bb5cb77
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
We plan to retire that symbol after 4.11 as well, with relocatable
ramstage becoming the normal mode of operation.
Change-Id: I36029215e5c8726f7dcc268bddc0d2b0161e3c40
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34500
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Building for ChromeOS implies the use of Depthcharge which doesn't
support legacy text mode.
Change-Id: I7fd82bfed1e59de2de75419cfaea6f0c19cfdf5e
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34483
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set the controller state to D0 during the GSPI sequence,this ensures
the controller is up and active.
BUG=b:135941367
TEST=Verify no timeouts seen during GSPI controller enumeration
sequence for CML and ICL platforms.
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I2f95059453ca5565a38650b147590ece4d8bf5ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
|
|
Set the controller state to D0 during the uart init sequence, this
ensures the controller is up and active.
One more argument struct device *dev has been added
to uart_lpss_init function for the same.
BUG=b:135941367
TEST=Verify no timeouts seen during UART controller enumeration
sequence in CML and ICL platforms.
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I0187267670e1dea3e1d5e83d0b29967724d6063e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34447
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Uprev the 3rdparty/blobs submodule to the newest HEAD, which
contains the SSPM binary for MT8183 platforms
( https://review.coreboot.org/c/blobs/+/32698 ).
Change-Id: I8a4dfa7eaace1ea473f5970596c3201342e48927
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34494
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch appends a unit (milliseconds) to time-out macro names for
better understanding the code which is using the macros.
Change-Id: Ibc4beda2660a83fd5f0ed325b2ee3148c6d96639
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34384
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch provides an increased timeout (60ms -> 1s) for SPI
HW-sequencing flash erase operations. Without that the erase for MRC
cache writing on siemens/mc_bdx1 sometimes goes wrong because the
timeout stops waiting for flash cycle completion. It was found
during continuous integration. Investigation showed that the used flash
type takes sporadic (e.g. 5% of the test cycles) more time for completion
of erasing operation if the ambient temperature increases. The measured
time values are in range of data sheet of SPI flash. 60ms is a typical
value. So increasing the value is necessary.
tested on siemens/bdx1; measured time values with increased ambient
temperature of flash were always smaller than worst case value of 1s.
Change-Id: Id50636f9ed834ffd7810946798b300e58b2c14d2
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This patch moves SPI_FLASH time-outs from spi/spi_flash_internal.h for
SPI SW-sequencing to include/spi-generic.h to provide also for
SPI HW-sequencing.
tested on siemens/bdx1 and checked if all includes of
spi_flash_internal.h on other places provide an include of
spi-generic.h before
Change-Id: I837f1a027b836996bc42389bdf7dbab7f0e9db09
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34345
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Enable I2C0 in fleex then verify EMR function successfully
BUG=b:135968368
BRANCH=octopus
TEST=EMR function working normally with I2C0 in Grob360S.
Change-Id: I784ff32418bc839bcec14fbfd7236f708828690e
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34364
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Relocate call to vboot_save_recovery_reason_vbnv and rename
vb2_clear_recovery_reason_vbnv for consistency.
BUG=b:124141368, b:124192753
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I111cc23cf3d4b16fdb058dd395ac17a97f23a53f
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33551
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
vboot_handoff is no longer used in coreboot, and is not
needed in CBMEM or cbtable.
BUG=b:124141368, b:124192753
TEST=make clean && make runtests
BRANCH=none
Change-Id: I782d53f969dc9ae2775e3060371d06e7bf8e1af6
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33536
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
-W is the old name for -Wextra, so let's rename it to be consistent with
the rest of the utility Makefiles.
Change-Id: I0e50f13d2617b785d343707fc895516574164562
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34455
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
size_t is the natural integer type for strlen() and array indices, and
this fixes several integer conversion and sign comparison warnings.
Change-Id: I5658b19f990de4596a602b36d9533b1ca96ad947
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33794
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- Constify the string argument
- Change int to size_t, which is what xmalloc expects
Change-Id: I8b5a13319ded4025f883760f2b6d4d7a9ad9fb8b
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33793
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The documented return value for strlcat is horribly wrong, as is the
return value itself. It should not return the number of appended bytes,
but rather the length of the concatenated string. From the man page:
The strlcpy() and strlcat() functions return the total length of the
string they tried to create. For strlcpy() that means the length of
src. For strlcat() that means the initial length of dst plus the
length of src. While this may seem somewhat confusing, it was done
to make truncation detection simple.
This change is more likely to fix existing code than break it, since
anyone who uses the return value of strlcat will almost certainly rely
on the standard behaviour rather than investigate coreboot's source code
to see that we have a quirky version.
Change-Id: I4421305af85bce88d12d6fdc2eea6807ccdcf449
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Spotted out using -Wconversion gcc warning option.
Change-Id: I29a7ae8c499bb1e8ab7c8741b2dfb7663d82a362
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
|
|
BUG=b:136606255
Change-Id: I8fa29dc96e7a066f6708ede6b7bee2382c7008cb
Signed-off-by: Philip Chen <philipchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
SRCCLKENA holds 26M clock, which will fail suspend/resume,
and the SRCCLKENA is not used by mt8183,
so we can simply release it for suspend/resume to work.
BUG=b:80501386
BRANCH=none
Test=Boots correctly on Kukui, suspend test pass.
Change-Id: Ib6e11faeb6936a1dd6bbe8b1a8b612446bf51082
Signed-off-by: Yanjie.jiang <yanjie.jiang@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32666
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For 4.11 that's obviously just the release notes template.
Change-Id: I44c15bcaedf1367d745c533cc0a4acebdd2f812e
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34469
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
SSPM is "Secure System Power Manager" that provides power control in
secure domain. The initialization flow is to load SSPM firmware to
its SRAM space and then enable.
BUG=b:80501386
BRANCH=none
Test=Build pass
Change-Id: I4ae6034454326f5115cd3948819adc448b67fb1c
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31516
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
commit bde6d309df (x86: Change MMIO addr in
readN(addr)/writeN(addr, val) to pointer) accidentally changed
the type of reg32 to a u8 *, so change it back to a u32.
Change-Id: If6beff17ed3ddf85889aba5f41d1ba112cd74075
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1402160
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34486
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Support SANDISK SDADA4CR-128G, SAMSUNG KMDP6001DA-B425, KMDV6001DA-B620
EMCP LPDDR4X DDR bootup.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on EMCP DRAM
Change-Id: I7de4c9a27282d3d00f51adf46dcb3d2f3984bfff
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
The 'Jacuzzi' is a different base board that will share most of Kukui
design. For AP firmware, there will be only a few changes expected,
mostly in display (for MIPI bridge) and EC/keyboard so we want to create
it as variants inside Kukui folder, not forking a new directory.
BUG=b:137517228
TEST=make menuconfig; select 'krane' and build; select 'jacuzzi' and build.
Change-Id: Ic2b04e01628dc3db40f79f9bbdd5cc77d9466753
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34344
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Calibrate RTC eosc clock which will be used when RTC goes into
low power state.
BUG=b:133872611
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: Ie8fd6f4cffdcf7cf410ce48343378a017923789c
Signed-off-by: Ran Bi <ran.bi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: You-Cheng Syu <youcheng@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
It is proper to check cpu turbo mode capability after it is selected
to be enabled. If processor exhibits the presence of hardware support for
turbo, turbo global state will be updated with TURBO_ENABLE. Otherwise,
TURBO_UNAVAILABLE is applied to turbo global state.
TEST=Validated turbo state on GLK and WHL devices.
Change-Id: Ib1bc37fb339b4a0bb6a7cdc6cd4391575b22b55a
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34145
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add maintainers to Portwell PQ-M107 boards.
BUG=N/A
TEST=N/A
Change-Id: I9171a9dd56bba7cc4836a7d2c2e314b910229cb9
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34445
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
We do not want to disguise somewhat complex function
calls as simple macros.
Change-Id: I298f7f9a1c6a64cfba454e919eeaedc7bb2d4801
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
All the PCI accesses in the file are now accessed
without SA_DEV_ROOT expanding to function call.
Change-Id: I30d331e9c18a486ea971e8397a6e20a0f82d5f84
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34410
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Since PCH_DEVFN_PMC device is a PCI device that may be
hidden from enumeration, use SA_DEVFN_ROOT instead to
locate the SOC configuration.
Change-Id: I4b5195827fb32ec1dbd0bd6c9e243f4f9a4775ca
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Fix several memory leaks on failed printing or tests. These don't matter
much, but it keeps Coverity happy.
Change-Id: Ie750acb50ae1590c3aea533338a8827c03459c1a
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 130245{1,2,3}
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Hatch_whl variant is deprecated.
BUG=b:137180390
Change-Id: I88fa201398ad5fb70da48d022f1ae86fecafa660
Signed-off-by: Philip Chen <philipchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34432
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is based on the grunt variant.
BUG=b:135551210
BRANCH=none
TEST=emerge-grunt coreboot chromeos-bootimage
Ensure that image-treeya.*.bin are created
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I40f3c9de87350777b02dd91d8c5b9dbe2eb9f6b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34435
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|