Age | Commit message (Collapse) | Author |
|
People who know a lot more about electrons and stuff than I do tell me
that leaving a HiZ pin floating without a pull resistor may waste power.
So if we find a pin to be HiZ when reading tristate strapping GPIOs, we
should make sure the internal pull-down is enabled when we're done with
it. (For pins that are externally pulled high or low, we should continue
to leave the internal pull disabled instead.)
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I1669823c8a7faab536e0441cb4c6cfeb9f696189
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44253
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Alexandru Stan <amstan@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I90c0378c4042dec39c8c86c1d2339a5cbcfe78e3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Update dq/dqs mappings based on halvor schematics.
BUG=b:162892573
BRANCH=none
TEST=FW_NAME=halvor emerge-volteer coreboot chromeos-bootimage
Change-Id: I98f79283aa18f6fd41114fb6b60cac1cbed69de7
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43988
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GPIO_89 was marked as EN_DEV_BEEP_L in pre-v3.6 schematics, but it was
never really used on any of the zork variants. Starting with v3.6,
GPIO_89 is left unused in schematics.
This change configures GPIO_89 as PAD_NC in baseboard GPIO
table. Since EN_DEV_BEEP_L still needs to be driven high to allow
speakers to work, GPIO_89 is configured as PAD_GPO driven high on
pre-v3.6 schematics.
BUG=b:62108046
Change-Id: I026cd6cb598667ce6e115c3ec9357a6a56051d39
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44190
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds support for touchscreen power control using:
* GPIO_90 for trembyle based boards
* GPIO_32 for dalboz based boards
By default, baseboard tables configure these GPIOs as PAD_GPO driven
low and override trees expose these pads as enable_gpio to be used by
ACPI power resource.
In order to support pre-v3.6 boards, override tables configure these
pads as PAD_NC and drop the enable_gpio setting from device tree based
on board version.
BUG=b:161935640, b:162747210
Change-Id: Iba5e36b65b44ea11613b4d5fc8f13ce6433f83ab
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44193
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
v3.6 of reference schematics have switched the polarity of reset
signal to touchscreen controller from active high to active low. This
change updates the default configuration in baseboard gpio tables to
set the reset GPIO to output low and override tables in variants to set the
reset GPIO to output high. Additionally, devicetree by default exposes
ACTIVE_LOW configuration for reset GPIO. In order to support pre-v3.6
boards, reset GPIO is updated to ACTIVE_HIGH based on board version.
BUG=b:161937506
Change-Id: I092f274d8eb1920a1cd6d3eccbe8f26b0b28928a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Create function update_dmic_gpio to update DMIC GPIO for ACP machine and
use find_dev_nested_path function for consistency.
BUG=None
BRANCH=None
TEST=None
Change-Id: I96cf207f24c6117d98ff2bf7e6e5cd282489e805
Signed-off-by: Josie Nordrum <josienordrum@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44158
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
HP_INT_ODL is no longer connected to CODEC_GPI in schematic version 3.6.
Split variant_audio_update into update_dmic_gpio and update_hp_int_odl.
Changed GPIO_29 from PAD_NC to PAD_GPI in Trembyle. Changed GPIO_84 from
PAD_NC to PAD_GPI for Dalboz. Changed HP_INT_ODL to appropriate pin in
both boards devicetree.cb.
BUG=b:161938476
BRANCH=None
TEST=None
Cq-Depend: chromium:2335424
Change-Id: I05ffb063ab99823d07be6eaa911efbde3cc4ff55
Signed-off-by: Josie Nordrum <josienordrum@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44157
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Added VARIANT_SUPPORTS_PRE_V3_6_SCHEMATICS and
VARIANT_MIN_BOARD_ID_V3_6_SCHEMATICS. Added helper functions to check
if variant uses v3.6 and if variant uses CODEC GPI.
BUG=b:161938476
BRANCH=None
TEST=None
Change-Id: If86e1ea3c02db354c7b410f1bbc1daacb483cc51
Signed-off-by: Josie Nordrum <josienordrum@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44156
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new ddr_memory_cfg structure to support both DDR4 and LPDDR4x
memory types.
Change existing variant code to use the new meminit_ddr() call
instead of calling meminit_lpddr4x() directly.
BUG=b:161772961
TEST='emerge-volteer coreboot chromeos-bootimage' and verify that
volteer still boots. NOTE that this only tests the lpddr4 side
of the implementation as I do not have a DDR4 board to test this on.
Change-Id: Id4bca2bfa97530f0d04a0e8d90f01b8281d2aea6
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Add a common routine meminit_ddr() that calls the appropriate meminit
routine based on whether the memory type requested is LPDDR4x or DDR4.
BUG=b:161772961
TEST='emerge-volteer coreboot chromeos-bootimage' and verify that
volteer still boots. NOTE that this only tests the lpddr4 side
of the implementation. I do not have a DDR4 board to test this on.
Change-Id: Ib2039eb89211efc48d10897eb679d05f567ae5a1
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44249
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Newer boards have removed the second temperature sensor
and relocated the remaining sensor.
BUG=b:162909373
TEST=Confirm on hardware.
Change-Id: Ie41a57598b0c87a6632f4c55c0f60a94a89cae43
Signed-off-by: Andrew McRae <amcrae@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44206
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Coverity detects an integer handling issue with BAD_SHIFT. The inline
function log2_ceil(u32 x) { return (x == 0) ? -1 : log2(x * 2 - 1); }
could return -1, which causes shifting by a negative amount value and
has undefined behavior. Add sanity check for the acm_header->size to
avoid shifting negative value.
Found-by: Coverity CID 1431124
TEST=None
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Ic687349b14917e39d2a8186968037ca2521c7cdc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44186
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I714247da261d4dd1b6a722436d71404f9862e958
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
There's no `function 1` on the iGPU device for this northbridge.
Change-Id: I597446f703165447c3a0d0c1536583b08bc8450c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
We can use `decode_pcie_bar` instead, as other northbridges do.
Change-Id: I35bede573ef2635c54123f9e553003577ecd0ea7
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44122
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Turn it into `decode_pcie_bar`, taken from gm45.
Change-Id: Id1c2cfbcac1a798d046beced790930511dc97972
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44121
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch ensures that coreboot is able to take control of APs back
by doing a full AP re-initialization after FSP-S is done.
TEST=Able to see all cores available after booting to OS using below command
when coreboot is built with USE_INTEL_FSP_MP_INIT enable.
> cat /proc/cpuinfo
Without this CL :
shows only 1 core (only BSP)
With this CL :
shows all possible cores available (BSP + APs)
Change-Id: I247d8d1166c77bd01922323b6a0f14ec6640a666
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch makes init_cpus function external so that it can be used
in below scenarios:
1. When coreboot is doing MP initialization as part of
BS_DEV_INIT_CHIPS (exclude this call if user has selected
USE_INTEL_FSP_MP_INIT)
2. coreboot would like to take APs control back after FSP-S has done
with MP initialization based on user select USE_INTEL_FSP_MP_INIT
Also make sure post_cpus_init function is getting executed
unconditionally to update MTRR snapshot on all cores.
Change-Id: Idc03090360f34df074b33ba0fced2d192edf068a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44076
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
BUG=none
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: I072745933fe141cac26afd044836a564e345d036
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43795
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set correct DDR geometry for all existing memory modules.
BUG=none
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: I9b53ab2bf43e0dfb7448eb37a18faf686267eaed
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42035
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Currently the DRAM initialization code can only work on 4GB size and
want to support larger memory sizes in future, so add geometry
information to the DRAM calibration parameters.
BUG=none
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: I1fdf50b75c6a552c0a889f21e1a81ab4b9a305fa
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Different density should correspond to different tRFCab and tRFCpb
timing.
BUG=none
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: I2599fcd620cdefe2e12480932ffd75e0416b9545
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42194
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Some DRAM control settings need to apply to all channels,
so add those missing settings.
Also fix a typo (0x1 < 0) to (0x1 << 0).
BUG=none
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: I35e25c922ed45216d5f04835abcd10809a8d559a
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42193
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
A new board introduced to Kukui family.
BUG=b:162478693
TEST=make # select Fennel
BRANCH=kukui
Signed-off-by: xiatao5 <xiatao5@huaqin.corp-partner.google.com>
Change-Id: I1f742a36793f38c37fbd4e1b4cbddbd542e785ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44061
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-by: Zhaoyou Hong <hongzhaoyou@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add __packed to TYPE17_DMI_INFO structure to remove padding. Remove
reserved fields that are no longer required. Corresponding change will
also be made within fsp to pack the structure.
BUG=b:154046847
TEST=Boot a trembyle with and without the reserved fields and confirm
type 17 table is unchanged.
Cq-Depend: chrome-internal:3194239
Change-Id: I9ba7e2a4fb82c7b0b77ee7c6c075e6211d4f6adf
Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44086
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
This change updates devicetree to enable SSDT generation for world
facing and user facing cameras of jasperlake_rvp. Also removes DSDT
changes related to the world facing camera.
Change-Id: Ib439572bc1d15ef02c86c7bfa88af6b16eb06f97
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41758
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Includes changes in mipi_camera driver to fix following issues related
to SSDT generation for IPU devices.
1. acpigen_write_device was not getting called for IPU devices
2. acpigen_pop_len was called for a generic devices without calling
acpigen_write_device
Change-Id: I309edd065719cb8250f1241898bb5854004d2a9f
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44025
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This code is not even being build-tested. Drop it before it grows moss.
Also drop a now-unnecessary #undef directive from one mainboard.
Change-Id: I613e77723d108641f16ec732358849c3bc0e49e0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43220
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This code has been commented out for a long time. Drop it.
Change-Id: Iddc635dc5bbc7a8b42e97f4e2f6d579a839d874b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43264
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes all redundant read microcode version implementation
from SoC directory and refer from cpu/intel/microcode/microcode.c file.
TEST=Able to get correct microcode version.
Change-Id: Icb905b18d85f1c5b68fac6905f3c65e95bffa2da
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44175
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update gpio GPP_E7 and enable the Raydium TS support
BUG=b:157402209,b:162632701,b:162636271
BRANCH=master
TEST= 1. emerge-volteer coreboot chromeos-bootimage
2. boot up on voxel DUT and make sure the raydium TS can work.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I377aded4982ece71f4dabb58f307f68c713edcd2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44055
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
|
|
update telemetry value for SDLE test result.
BUG=b:160698427
BRANCH=None
TEST=emerge-zork coreboot
Change-Id: Icce57f9be2732ff79f336daa6c447a30247366cf
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43278
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The device is a PCIe to eMMC bridge controller to be used in the
Chromebook as the boot disk. The datasheet name is GL9763E and
the revision is 02.
The patch sets single request AXI, disables ASPM L0s and enables SSC.
Signed-off-by: Ben Chuang <benchuanggli@gmail.com>
Change-Id: I158c79f5ac6e559f335b6b50092469c7b1646c56
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Align the C-state MSR value of BSP with AGESA.
BUG=b:162705221
BRANCH=none
TEST=Check the MSR value is correct and BSP can enter CC6 with AVT tool
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: Ib98d34af518439d338326446c20601867ad31690
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44135
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
a. USI_REPORT_EN is no longer set to high in coreboot. Instead
GPIO_144 is exposed as stop_gpio in ACPI to allow OS to control this
pad as required.
b. Add Delay after stop_gpio Low - 300ms
BUG=b:162263398
Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com>
Change-Id: I3d4dcb6e5cae5d9515abfd415315ec4114ca80b4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44107
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I5d3a5ede47aefc7cc2ee330f8a0bcded16138764
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44173
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I150591aa3624895c4c321101a251547dd23d1db5
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44172
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Ideally don't need to mark the entire top_of_ram till TOLUD range (used
for stolen memory like GFX and ME, PTT, DPR, PRMRR, TSEG etc) as
cacheable for OS usage as coreboot already done with mpinit w/ smm
relocation early.
TEST=Able to build and boot ICL, TGL RVP.
Without this CL :
PCI: 00:00.0 resource base 77000000 size 4800000 align 0 gran 0 limit 0 flags f0004200 index 9
PCI: 00:00.0 resource base 7b800000 size 4400000 align 0 gran 0 limit 0 flags f0000200 index a
With this CL :
PCI: 00:00.0 resource base 77000000 size 8c00000 align 0 gran 0 limit 0 flags f0000200 index 9
No changes observed with MTRRs snapshot.
Change-Id: I64c14b14caf0a53219fdc02ec6bbd375955a0c8e
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This cleans up some unneeded no-ops in the mainboard.c files
of baytrail boards.
Change-Id: I7662f6e860d672a99b211488122bec073cc78acf
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44136
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Máté Kukri <kukri.mate@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This file only needs <stdint.h>. So replace <types.h> with <stdint.h>.
Change-Id: Ib58532837941d5324b28bc2c607d70555ce9caee
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44134
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
DRAM support list
0x00 HYNIX HMA851S6CJR6N-VK
0x01 HYNIX H5ANAG6NCMR-VKC
0x02 Samsung K4A8G165WC-BCTD
0x03 Samsung K4AAG165WB-MCTD
0x04 Samsung K4A8G165WC-BCWE
0x05 HYNIX H5AN8G6NDJR-XNC
0x06 HYNIX H5ANAG6NCMR-XNC
0x07 Micron MT40A512M16TB-062E:J
0x08 Micron MT40A1G16KD-062E:E
0x09 Samsung K4AAG165WA-BCTD
0x0A Samsung K4AAG165WA-BCWE
BUG=b:161579679
BRANCH=master
TEST=build
Change-Id: Ib9fa5ae98568d659326d431a4006174a343fa299
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43991
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add Alder Lake specific CPU, System Agent, PCH (Alder Point aka ADP),
IGD device IDs.
Document Number: 619501, 619362
Change-Id: I17ce56a220e4dce2db2e0e69561b3d6dac9e65a2
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44108
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Other Intel northbridges do this.
Tested with BUILD_TIMELESS=1, Asus P5QL PRO does not change
Change-Id: I50785b7bf3e3cc0eade7fda4b4b2e2bb71a54c31
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This reverts commit ad247ac5d8ef4a38bd1d61fbd28076f343a46c5c.
It doesn't work like this. The `dev->enable` field has already been
updated and is always `0` at this point.
Change-Id: I5b3560dcea2f226c841f4823526db2fdab149d22
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The VT-d architecture specification (Doc. D51397-011, Rev. 3.1) says:
BIOS implementations must report these remapping structure types in
numerical order. i.e., All remapping structures of type 0 (DRHD)
enumerated before remapping structures of type 1 (RMRR), and so forth.
So, update the corresponding code to adhere to the specification.
Change-Id: I2446d536603559f637f3f8b1b44e9d712aa35492
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44112
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The VT-d architecture specification (Doc. D51397-011, Rev. 3.1) says:
BIOS implementations must report these remapping structure types in
numerical order. i.e., All remapping structures of type 0 (DRHD)
enumerated before remapping structures of type 1 (RMRR), and so forth.
So, update the corresponding code to adhere to the specification.
Change-Id: Ib5ef5e006e590d72bec52e057e9b72150e0e636f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The VT-d architecture specification (Doc. D51397-011, Rev. 3.1) says:
BIOS implementations must report these remapping structure types in
numerical order. i.e., All remapping structures of type 0 (DRHD)
enumerated before remapping structures of type 1 (RMRR), and so forth.
So, update the corresponding code to adhere to the specification.
Change-Id: I4ee3ae6c45e2a2c921fbccbb62b853e4a141a58d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44110
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The VT-d architecture specification (Doc. D51397-011, Rev. 3.1) says:
BIOS implementations must report these remapping structure types in
numerical order. i.e., All remapping structures of type 0 (DRHD)
enumerated before remapping structures of type 1 (RMRR), and so forth.
So, update the corresponding code to adhere to the specification.
Change-Id: I1f84cae41c6281e0d545669f1e7de5cab0d9f9c0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44109
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The call to `decode_pcie_bar` always initializes these values.
Change-Id: Iffdb2fc846a6fc1a1abc504370b6283e292b61c0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44150
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Some fields in GNVS seem to be copied over from Apollolake to
Stoneyridge to Picasso. This patch removes the unused fields.
BUG=b:161165393
TEST=Mandolin still boots and dmesg shows no new ACPI errors.
Change-Id: I8c6b580543089bf0180a7caeb9e6a47dc4ed4a1d
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44154
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Constify and eliminate local variables where possible to ease reading.
Tested with BUILD_TIMELESS=1, Asus P5QL PRO does not change.
Change-Id: I6d2937146a4764823cfc45c69a09f734b2525860
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Other northbridges have a `decode_pcie_bar` function. Since it's not
needed anywhere else, keep it as a static function for now.
Change-Id: Ide42ffcebb73c3e683e0ccaf0ab3aeae805d1123
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44146
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
We can use `decode_pcie_bar` instead, if we make it non-static.
Change-Id: Ic39f3df0293b4d44f031515b1f868e0bb9f750c9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44145
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Turn it into `decode_pcie_bar`, taken from gm45.
Change-Id: I81a398535f18ced10b5521bddcf21f3568e1d854
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 does not change.
Change-Id: I9c69028ff13efa6999b6110fbcd9233a09def991
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44152
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
While we are at it, also reflow a few lines that fit in 96 characters.
Tested with BUILD_TIMELESS=1, Getac P470 does not change.
Change-Id: I2cc3e71723e9b6898e6ec29f0f38b1b3b7446f09
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This brings Ironlake closer to Sandy Bridge.
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 does not change.
Change-Id: Idde75e7295f642f8add34168bffe5851ea02fbc6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43687
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested with BUILD_TIMELESS=1, Lenovo ThinkPad X230 remains identical.
Change-Id: Ie3570cd0a75c6b34581b35165c1c6393214ad0bb
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44151
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Rename it and make it return an int, like other northbridges do.
Change-Id: I8bbf28350976547c83e039731d316e0911197d54
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add `decode_pcie_bar` for consistency with other Intel northbridges.
Change-Id: If04ca3467bb067b28605a3acccb8bda325735999
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44120
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Constify and eliminate local variables where possible to ease reading.
Tested with BUILD_TIMELESS, Foxconn D41S remains identical.
Change-Id: Iaad759886a8f5ac07aabdea8ab1c6d1aa7020dfc
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44140
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Rename it and make it return an int, like other northbridges do.
Change-Id: Id526ff893320a77e96767ec642c196c2196f84e1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44139
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Also constify a local variable while we're at it.
Tested with BUILD_TIMELESS=1, Foxconn D41S does not change.
Change-Id: I90ab35932d7c0ba99ca16732b9616f3a15d972dd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44124
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This change adds support for pen insert/eject operations in S0 and
wake on pen eject from S3 for vilboz.
BUG=b:157628650
Change-Id: I7ba0881b67dfb67c032667d591f7d1806a50af22
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44153
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add Kontron/bSL6 together with Siemens/Boxer26, a baseboard for the
bSL6.
The plain bSL6 variant received little testing and only during early
development. The Boxer26 variant is actively used and fully tested.
The latest rebase was boot tested with FILO and Linux 4.19.
Change-Id: If2b6a3f1e9dd095463f1f1521068b9f66a9189c5
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29480
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It is the same for the two Bay Trail boards in the tree.
Change-Id: I5110cfa8807406232e4f7f1fe79dfe9c3ae4dac4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44115
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Máté Kukri <kukri.mate@gmail.com>
|
|
They default to zero already, so we might as well drop them.
Tested with BUILD_TIMELESS=1, its coreboot.rom does not change.
Change-Id: I3c04240b270f51d584f879e1344301679f133fdb
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43928
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The call to `decode_pciebar` always initializes these values.
Change-Id: Ide45e1e5e8b8d6cfebd2fc4e272b1971b0a9b346
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44119
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
We can use `decode_pcie_bar` instead, if we make it non-static.
Change-Id: I4d005290355e30e6fdaae3e8e092891fddfbe4fc
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Tested with BUILD_TIMELESS=1, Roda RK9 does not change.
Change-Id: Ibfa9a6fa7818d0bd79d2c0d9331c0ca38a2b7fe3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
While we are at it, also reflow a few lines that fit in 96 characters.
Tested with BUILD_TIMELESS=1, Roda RK9 does not change.
Change-Id: Icaca44280acdba099a5e13c5fd91d82c3e002bae
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42189
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Michael Niewöhner
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use tabs instead of eight (sometimes less) spaces.
Change-Id: Ic3d61f5210d21d9613fc50b47b90af71f544169a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Without the brackets, the string seems to be added as a list of
characters, and since there's no extension called 's', sphinx
bails out.
Change-Id: If0fc9c1a74f334b6154df3cb26836509de913567
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44114
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iede1452cce8a15f85d70a3c38b4ec9e2d4a54f9e
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Remove const struct imd *imd and const struct imdr *imdr parameters from
the prototypes of imdr_entry_size(), imd_entry_size() and imd_entry_id()
functions since they are not used anywhere.
Signed-off-by: Anna Karas <aka@semihalf.com>
Change-Id: I6b43e9a5ae1f1d108024b4060a04c57f5d77fb55
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43999
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib7c6ab0a2e5a03f30b70c4bbb1091fa9c689c23b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44094
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In kernel clk for AMD SoCs we expose a generic clk by the name oscclk1.
This oscclk1 is a fixed 48Mhz frequency clk in RV.
In Zork oscout system clock is linked to rt5682 mclk. Setting mclk-name to
oscclk1 tells rt5682 driver its mclk is oscclk1.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
BUG=b:158906189
TEST=rt5682 driver get the correct clk and tested audio playback
Change-Id: Ic565e8e0573e085e5759b2d3688cc0a4533b67fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44010
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
RV has difference in clk framework. In RV we get a 48Mhz fixed clk,
while in ST we had 25Mhz, 48mhz clocks and a Mux to select between them.
To differentiate set the fmw property to 1 for boards using RV family of SoC.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
BUG=b:158906189
TEST=rt5682 driver get the correct clk and tested audio playback
Change-Id: I685ded1607c2c7edc5e48f0bada258ebde192bb8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44009
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
- Single channel DDR3L: requires mrc.bin (extracted from ChromeBook
firmware)
- Tested, working with: 2GB SK Hynix stick, 4GB Samsung stick
- VGA: Video works with VGA rom extracted from UEFI
- SeaBIOS (runs the option rom) tested, works in text mode
- GRUB2 (coreboot runs the option rom) tested, works in VESA mode,
no video in text mode
- USB: Both USB2.0 ports work using the EHCI controller
- Works in both SeaBIOS, GRUB2 and Linux
- Serial: driven by an IT8728F SuperIO
- Works as a console in coreboot, SeaBIOS and GRUB2
- Works with interrupts in Linux after a cold boot, after a warm
reboot IRQs get lost
- SATA: 2 ports on board (one is mSATA)
- SATA init works with both refcode.elf and native refcode
(patch CB:43133)
- Booting from SATA works with GRUB2, SATA works in Linux
- Patch CB:44088 fixes SATA in SeaBIOS
- 4 PCIe Intel ethernet controllers
- Only tested in Linux, all 4 work with the igb driver
- Power button, reset button and both indicator LEDs work
- Optional fan header is not tested as the appliance is passively
cooled
- TXE (ME): optional, does not shut down after 30 minutes without the
TXE blob
- Works with TXE blob left as is, shows up on PCI
- Works with the entire TXE section wiped, no device on PCI,
intelmetool can't find anything
Used rambi as an example, but almost everything is modified as the two
boards are very different.
Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
Change-Id: I99ed0c94c3255578151f940ad9b274e6f0816bfe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43087
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
- The Bay Trail MRC fails to read the SPDs from SMBus.
- Instead the SPDs are read into a buffer and the buffer is passed to
the MRC.
Change-Id: I7f560d950cb4e4d118f3ee17e6e19e14cd0cc193
Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44092
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This follows CB:44047 which probably missed this because it's a
custom assert macro (in code that has only recently been added to
build checks). Without this change, building with gcov fails because
gcc_assert(0) can be build-time verified (as introduced by CB:44044)
while we need runtime failure semantics here.
Change-Id: I71a38631955a6a45abe90f2b9ce3a924cc5d6837
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44105
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Before this change, we have this problem (boot log from DeltaLake
config A server):
Jumping to boot code at 0x00040000(0x755f6000)
Stack overrun on CPU0 (address 0x7574a000 overwritten). Increase stack from current 4096 bytes
ERROR: BUG ENCOUNTERED at file 'src/lib/stack.c', line 43
Linux version 4.16.18
Configure STACK_SIZE to make it larger to fix above problem.
Now, we have this boot log:
BS: BS_PAYLOAD_LOAD exit times (exec / console): 326 / 21727 ms
Jumping to boot code at 0x00040000(0x752f2000)
CPU0: stack: 0x75746000 - 0x7574a000, lowest used address 0x7574681c, stack used: 14308 bytes
Linux version 4.16.18
TESTED=booted YV3 config A to target OS.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: Ia04a3ee0cd37177ecab65469855a1cf920742458
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
CPX-SP FSP is FSP 2.2, so select PLATFORM_USES_FSP2_2. SKX-SP continues
to select PLATFORM_USES_FSP2_0, as SKX-SP FSP is FSP 2.0.
Correct DCACHE_RAM_BASE. Increase FSP_TEMP_RAM_SIZE, DCACHE_BSP_STACK_SIZE,
and adjust DCACHE_RAM_SIZE accordingly. Thus the workaround of hardcoding
StackBase and StackSize FSP-M UPD parameters is removed.
Add CPX-SP soc implementation of soc_fsp_multi_phase_init_is_enable()
to indicate that FSP-S multi phase init is not enabled, since it is
not supported by CPX-SP FSP.
TESTED=booted YV3 config A to target OS.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I25e39083df1ebfe78871561b0a0e230b66524ea9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44049
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some settings are suspicious, and have been annotated with FIXMEs.
Tested with BUILD_TIMELESS=1, its coreboot.rom does not change.
Change-Id: I7755867cb92745f542a4261db5dd118ca905612b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43919
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 does not change.
Change-Id: I4d878b5dbb5a5617143240b8f5bc5b6f5a754511
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43740
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 does not change.
Change-Id: I8feff0d71ad70ac994e29b238d35e2c73aa92ecd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43739
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 does not change.
Change-Id: I44db564c757647f493e92d35602178ef8b722517
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Like the QPI Link device, there can be more of these devices on
multi-socket platforms. So, name it Physical Layer 0.
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical.
Change-Id: Ia5f6e42a742bc69237de38f1833e56c8da7c4f7e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 does not change.
Change-Id: Id226a2fdcbd0fe48822c4f65746e14fb00db6b2e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43736
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
On multi-socket platforms, there can be two QPI buses, each with its own
PCI device. We only have one QPI link on Arrandale, though. In case
support for multi-socket processors ever gets added, name it Link 0.
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 does not change.
Change-Id: I6481154a2d1cc1c84c1f167a374a62af3b2cf3d8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43735
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 does not change.
Change-Id: I66b87d15f6b741c6fc935106c35b201fbd9ab2c6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This register resides within the SAD's config space, and is 64-bit.
Change-Id: I19458f7c6be6b1a5fcd47ac93ee0597f1251a770
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43733
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Let's hope this cheers up the poor System Address Decoder device.
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 does not change.
Change-Id: Ia62c05abb07216dc1ba449c3a17f8d53050b5af1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43732
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Only some registers have such a prefix. Drop it for consistency.
Change-Id: I1ef7307d10a06db8f3c1a05bd9184f21fceb9d90
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Uppercase variable names can be confused with register definitions. Use
lowercase names instead, conforming to the coding style guidelines.
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical.
Change-Id: I61a28bf964ea8c2c662539825ae9f2c88348bdba
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This is the only instance of `BETTER_MEMORY_MAP` in the tree.
Change-Id: I118e5b5a0f10da56e2335828477caed81c5bf855
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43729
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This register does not seem to exist on Ironlake.
Change-Id: I3fba6a3fd443f2c9eab874e1d1b8f081f58b1536
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Remove duplicated definitios and sort them by ascending offsets.
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical.
Change-Id: Idcfa64a39c12a4ac06a342ef9b51a01b806d4c84
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43727
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Looks like some registers are defined twice. Also, group some QPI
registers together. They were scattered around and mixed with the host
bridge registers, probably because other northbridges have such
registers in the host bridge's PCI config space. But not Ironlake.
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 remains identical.
Change-Id: I6e60f7fcb1467f302618eeab1b0d995920a98569
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43726
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|