summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-08-28mb/google/hatch: Enable Override DLLs for KindredJamie Chen
Enable SOC_INTEL_COMMON_MMC_OVERRIDE for Kindred BUG=b:136784418 BRANCH=none TEST=Boot to OS 100 times on Kindred proto 1 board. Change-Id: I390d237b9119ae42f4b0bb802bf9857552af78bf Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-28soc/intel/common/block: Provide mmc.c for setting dll registersKane Chen
Currently, we don't have UPDs to set emmc settings per mainboard on CML. This code change is to create mmc.c to provide interface to override dll settings per mainboard. Notice: set_mmc_dll function will override the dll values in FSP. BUG=b:131401116 BRANCH=none TEST=Boot to OS and confirm the dll values have been overridden. Change-Id: Ib3c72b9851f41585ec099d8ae83a721af87ed383 Signed-off-by: Kane Chen <kane.chen@intel.com> Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35040 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-28mb/google/hatch: Override DLL values for KindredJamie Chen
New emmc DLL values for Kindred BUG=b:136784418 BRANCH=none TEST=Boot to OS 100 times on Kindred proto 1 board. Change-Id: I52acb445c47fcdb9b60512dd501d810b1ae4dc10 Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35041 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-28Makefile: Move the .xcompile rule out of the if !NOCOMPILE blockRaul E Rangel
Generating the .xcompile file should be possible even without a config. BUG=b:112267918 TEST=Ran make and verified .xcompile was created Change-Id: I8075f71e6e3e2c150378818eeff2858c36b35843 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-08-28AUTHORS: Move src/arch/ppc64 copyrights into AUTHORS fileMartin Roth
As discussed on the mailing list and voted upon, the coreboot project is going to move the majority of copyrights out of the headers and into an AUTHORS file. This will happen a bit at a time, as we'll be unifying license headers at the same time. Additional changes in this patch: - Move descriptions below the license header Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I51d5b1f01ff47ed752761116e3f32cb9e168584f Reviewed-on: https://review.coreboot.org/c/coreboot/+/34637 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-28mb/google/drallion: remove GBE fileEric Lai
Drallion doesn't have on board LAN, remove GBE bin file config. BUG=b:139906731 TEST=emerge-drallion coreboot chromeos-bootimage and check image-drallion.bin not include GBE region Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ifbc295afd8d875b5098b0ce75252b51523a5c76e Reviewed-on: https://review.coreboot.org/c/coreboot/+/35114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-08-28mb/google/drallion: add dummy SPD fileEric Lai
Drallion will use soldered down memory. Add dummy spd file. BUG=b:139397313 BRANCH=N/A TEST=Build and check cbfs has the dummy spd.bin Change-Id: Ife59c2dd689d72b117f30e832a3ce7eed4fa4220 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35113 Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-28mb/google/poppy/variant/nami: add sku ids of bard/ekkoRen Kuo
add sku ids of bard/ekko BUG=b:139886622 TEST=emerge-nami coreboot Change-Id: Iabc3d587c3839e4a3121cea8504c50e2dc4f9699 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35115 Reviewed-by: Vincent Wang <vwang@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: YH Lin <yueherngl@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-27intel/baytrail: Use smm_subregion()Kyösti Mälkki
Change-Id: Ic2677bcf9f2f79c4db725ebcf342a8575ee7bc38 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34739 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-27intel/baytrail: Reorganize romstage.cKyösti Mälkki
Done just for future review convenience. Change-Id: I9cfb0a8177c8ca18947ef0109550a36aa4333383 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34910 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-27smsc/superio/sio1007: Fix header nameKyösti Mälkki
The file chip.h has a special purpose for defining the configuration structure used in static devicetree. Change-Id: If0289c29ca72768009c1b7166311bc4c3cee4171 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-08-27soc/intel/fsp_broadwell_de: Add ACPI HPET tableJohnny Lin
Tested on Mono Lake TEST=Note the kernel log: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter Change-Id: Idae9a7d3d4233037214d6203996bf44fe5f3a845 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35027 Reviewed-by: Johnny Lin Reviewed-by: Andrey Petrov <anpetrov@fb.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-27soc/intel/{apl,cnl,dnv,icl,skl} : Use common cpu/intel/car/romstage.c codeSubrata Banik
This patch includes common romstage code to setup the console and load postcar. Fix booting regression issue on all latest IA-SOC introduced by CB:34893 Change-Id: I9da592960f20ed9742ff696198dbc028ef519ddf Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-27libpayload/usb: add USB 3.1 GEN2 supportEric Lai
USB 3.1 GEN2 report speed type 4, add into speed enum. BUG=b:139787920 BRANCH=N/A TEST=Build libpayload and depthcharge on sarien and boot with USB GEN2 HUB with USB disk. Check ultra speed device in cbmem log. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ia0ef12b2f0d91bf0d0db766bbc9019de1614a4f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35023 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-27AUTHORS: Move src/arch/mips copyrights into AUTHORS fileMartin Roth
As discussed on the mailing list and voted upon, the coreboot project is going to move the majority of copyrights out of the headers and into an AUTHORS file. This will happen a bit at a time, as we'll be unifying license headers at the same time. Additional changes in this patch: - Remove comments saying that a file is based on another file from the coreboot project. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: If61689db67c58f0d66ab96ca749bfcd589935ce2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34607 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-27build system: add kconfig/toada to tools listPatrick Georgi
Without this, we're lacking a serialization point in abuild when doing parallel builds. This manifests in parallel attempts to write the toada binary, which fails. Change-Id: Id6ebbb3750284225670608e4927d80c4eea96afb Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35107 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2019-08-26intel/car: Use common TS_START_ROMSTAGEKyösti Mälkki
This timestamp also got unintentionally removed from some boards as they were transformed to use common romstage entry. Change-Id: I12be278a674f9a2ea073b170a223c41c7fc01a94 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34970 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-26x86: Introduce RESET_VECTOR_IN_RAM optionMartin Roth
Create a new Kconfig symbol that allows an x86 device to begin execution when its reset vector is in DRAM and not at the traditional 0xfffffff0. The implementation will follow later, this is just to setup various ENV_xxx definitions correctly for the build environment. Change-Id: I098ecf8bf200550db1e15f178f7661c1ac516dc5 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35004 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-26arch/x86: Simplify <arch/early_variables.h>Kyösti Mälkki
This enables the use of .bss section for ENV_BOOTBLOCK and ENV_VERSTAGE even with CAR_GLOBAL_MIGRATION=y. In practice, boards with CAR_GLOBAL_MIGRATION=y currently build with romcc-bootblock so they will not be using .bss. Change-Id: Ie9dc14f3e528d3e4f48304f4d7de50df448a8af6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-26what-jenkins-does: keep essential artifacts aroundsPatrick Georgi
Keep for every board: coreboot.rom, config.h, config.build That way these can be used in follow-up jobs. Change-Id: I5ca5cb84ab1bcffbc92a972980cd0769ebf02462 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-08-26emulation/qemu-x86: Rename memory.c to memmap.cKyösti Mälkki
Change-Id: I311423cb565485236f89bd6043155aaf6296a031 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34974 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-26emulation/qemu-x86: Use common romstage codeKyösti Mälkki
This provides stack guards with checking and common entry into postcar. Change-Id: If0729721f0165187946107eb98e8bc754f28e517 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34973 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-26lib/bootblock: Add simplified entry with basetimeKyösti Mälkki
This allows for minor optimization as num_timestamps becomes a constant zero for a function with local scope. The loop with calls to timestamp_add() gets removed from bootblock. Change-Id: Id230075c0e76fe377b6ea8c8ddf8318e07d29b91 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34972 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-26soc/intel: Use common romstage codeKyösti Mälkki
This provides stack guards with checking and common entry into postcar. The code in cpu/intel/car/romstage.c is candidate for becoming architectural so function prototype is moved to <arch/romstage.h>. Change-Id: I4c5a9789e7cf3f7f49a4a33e21dac894320a9639 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34893 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-26arch/non-x86: Use ENV_ROMSTAGE_OR_BEFOREKyösti Mälkki
Change-Id: I9dbf0fc14516f766fd164c7308906456f2865e89 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34982 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-26Add definition for ENV_ROMSTAGE_OR_BEFORE to <rules.h>Kyösti Mälkki
ENV_ROMSTAGE_OR_BEFORE is a direct replacement for testing defined(__PRE_RAM__) as a true statement instead of with the help of the preprocessor. Note that for x86, due to existence of ENV_POSTCAR and ENV_SMM, ENV_ROMSTAGE_OR_BEFORE and ENV_RAMSTAGE are not the inverse of each other. Change-Id: Ibd2292f922ccb9e79d10ca9bc35797048d174287 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34939 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-26Split MAYBE_STATIC to _BSS and _NONZERO variantsKyösti Mälkki
These are required to cover the absensce of .data and .bss sections in some programs, most notably ARCH_X86 in execute-in-place with cache-as-ram. Change-Id: I80485ebac94b88c5864a949b17ad1dccdfda6a40 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35003 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-26Move and rename ARCH_STAGE_HAS_xxx_SECTION rulesKyösti Mälkki
Currently only x86 requires special handling here, for simplicity avoid introducing <arch/rules.h> and deal with this directly in <rules.h>. For consistency prefixes are changed from ARCH_ to ENV_. Change-Id: I95a56dbad3482202f6cc03043589bebfb13c39af Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-26mb/scaleway/tagada: Remove use of car_get_var()Kyösti Mälkki
Board has CAR_GLOBAL_MIGRATION=n and can use .bss for a variable that was previously declared with CAR_GLOBAL. Test for !defined(__PRE_RAM__) can be transformed into ENV_RAMSTAGE here as the warnings about invalid bmcinfo structure do not need to be repeated in SMM console, which is generally disabled anyways due to DEBUG_SMI=n. Change-Id: I6b63213484107fa0eeb0d952d8766916b44a3c4e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35085 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-26soc/intel/common: Include cometlake EMMC controller IDJamie Chen
Add cometlake EMMC controller ID BUG=none BRANCH=none TEST=none Change-Id: I3943dad57918df3df7885c2e2d3a86ab0e1d6008 Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-08-26AUTHORS: Move src/arch/arm64 copyrights into AUTHORS fileMartin Roth
As discussed on the mailing list and voted upon, the coreboot project is going to move the majority of copyrights out of the headers and into an AUTHORS file. This will happen a bit at a time, as we'll be unifying license headers at the same time. Additional changes in this patch: - Make sure files say that they're part of the coreboot project - Move descriptions below the license header Note that the file include/arch/acpi.h is a fantastic example of why moving to the authors file is needed. Excluding the guard statements, it has 8 lines of copyrights for 3 function declarations. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I334baab2b4311eb1bd9ce3f67f49a68e8b73630c Reviewed-on: https://review.coreboot.org/c/coreboot/+/34606 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-26google/kukui: Enable CHROMEOS_USE_EC_WATCHDOG_FLAGYu-Ping Wu
Kukui AP doesn't remember if the last AP reset was due to AP watchdog. We need to enable CHROMEOS_USE_EC_WATCHDOG_FLAG so that it will query the reset reason from EC. BUG=b:109900671,b:118654976 BRANCH=none TEST=1. run 'mosys eventlog clear; stop daisydog; echo > /dev/watchdog' 2. wait for watchdog reset 3. check 'mosys eventlog list | grep watchdog' Change-Id: I053cc7664bbaf0d3fcae26ba9481a0ad700dca90 Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-08-26AUTHORS: Move src/arch/arm copyrights into AUTHORS fileMartin Roth
As discussed on the mailing list and voted upon, the coreboot project is going to move the majority of copyrights out of the headers and into an AUTHORS file. This will happen a bit at a time, as we'll be unifying license headers at the same time. Additional changes in this patch: - Make sure files say that they're part of the coreboot project - Move descriptions below the license header - Fix some spacing Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Id5f26a73f0df366651c076a94975bce1fb321b70 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34605 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-26mb/facebook/fbg1701/data.vbt: Correct EFP1 configurationFrans Hendriks
EFP1 is configured as 'DisplayPort with HDMI/DVI compatibility'. Using this setting 4K monitor is configured into lower resolution. Change EFP1 setting to 'HDMI/DVI' The next addtional small changes are made in VBT: UEFI GOP Driver Child Device 2 = LFP Child Device 3 = EFP1/LFP LFP Panel configuration Y-Res of Panel #10 = 1920 BUG=N/A TEST=LCD and HDMI on Facebook FBG1701 Change-Id: Idc694b15ff94b83291a8c8252e269b7e6d96f87b Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35043 Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-26vendorcode/eltan/security/lib: Always include cb_sha.c for bootblockFrans Hendriks
cb_sha.c depends on C_ENVIRONMENT_BOOTBLOCK. Include cb_sha.c unconditional since C_ENVIRONMENT_BOOTBLOCK is default for chipsets. BUG=N/A TEST=Boot Linux 4.20 and verify logging on Facebook FBG-1701 Change-Id: If93195596efe7d8f298430e67eb1cf79804b96fc Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
2019-08-26google/link: fix detection of dimm on channel 1Matt DeVillier
Changes to the sandybridge memory init code (both MRC and native) now require SPD data on all populated channels in order for dimms to be detected properly, so copy spd_data[0] to spd_data[2], as LINK always has 2 channels of memory down. Test: boot google/link, observe onboard RAM correctly detected on both channels Change-Id: Id01d57d5e5f928dfc1cd9063ab1625c440ef2bbe Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35084 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-08-26mainboard/emulation/qemu-aarch64: Update DRAM_SIZE_MBAsami Doi
DRAM_SIZE_MB should be the maximum size (255GiB / -m 261120M) that’s possible with QEMU on AArch64 virt because it tries to search the DRAM_SIZE_MB range to find the true memory size. Signed-off-by: Asami Doi <d0iasm.pub@gmail.com> Change-Id: Id479c0b18d1e1adceecdcca13e36119b95617e6d Reviewed-on: https://review.coreboot.org/c/coreboot/+/35024 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2019-08-26lib: ramdetect: Register exception handlers for ARMv8Asami Doi
Register exception handlers to avoid a Synchronous External Abort that is raised when you try to access a non-memory address on ARMv8. An exception handler can jump over the faulting instruction. This is the feature only for QEMU/AArch64. Signed-off-by: Asami Doi <d0iasm.pub@gmail.com> Change-Id: I09a306ca307ba4027d9758c3debc2e7c844c66b8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2019-08-26soc/intel/cannonlake: Add config to disable display audio codecAamir Bohra
FSP 1263 looks for UPD configuration of "AudioLinkHda" if false it disables SDI# link for the codec. Change-Id: I8330f47416e580bf6b9ca1faed1de5cd578d0e2e Signed-off-by: Selma BENSAID <selma.bensaid@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35078 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-26nb/intel/gm45: Call ddr3_calibrate_zq() only for DDR3 :)Nico Huber
Change-Id: I7d00ddf727e7250b767a1c4b58bf11b17e900fc1 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34828 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-26amdfam10: Remove use of __PRE_RAM__Kyösti Mälkki
Change-Id: I4215b27332034a3c07052db92e4abae55c3fe967 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-253rdparty/ffs: add open-power ffs utilsMarty E. Plummer
These tools are used to manipulate open-power specific partitioning and ecc algorithms. Change-Id: I0657f76aab75190244d0e81c2b1a525e50af484d Signed-off-by: Marty E. Plummer <hanetzer@startmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35007 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-24mb/google/octopus: Re-assign sku number for vortininjaWisley Chen
Re-assign sku number for vortininja. BuG=b:138177049 BRANCH=octopus TEST=emerge-octopus coreboot Change-Id: I3166a635151fcc7b2e3c0122fa05925cfa5df7d0 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-23google/chromeos: Support AP watchdog flag from Chrome ECYou-Cheng Syu
After ChromiumOS CL:1293132 and CL:1295890, Chrome EC can store the flag telling if the last reboot was triggered by AP watchdog for some boards (e.g., Kukui). This CL adds a new function google_chromeec_get_ap_watchdog_flag(), which reads the AP watchdog flag from Chrome EC, and updates the tables of reset causes and reset flags. A new Kconfig option CHROMEOS_USE_EC_WATCHDOG_FLAG is added for elog_handle_watchdog_tombstone() to determine if watchdog reset was triggered by the AP watchdog flag from EC instead of the tombstone in AP. BUG=b:109900671,b:118654976 BRANCH=none TEST=test with https://review.coreboot.org/c/coreboot/+/31843 Change-Id: I7a970666a8c6da32ac1c6af8280e808fe7fc106d Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-08-23ec/google/chromeec: Update ec_commands.hYou-Cheng Syu
Copy ec_commands.h directly from ChromiumOS EC repository (CL:1520574). Since ec_commands.h already defines usb_charge_mode and only USB_CHARGE_MODE_DISABLED is used in coreboot, enum usb_charge_mode is removed from ec.h. To avoid redefinition of the BIT macro, #ifndef check is added to include/types.h. BUG=b:109900671,b:118654976 BRANCH=none TEST=emerge-kukui -j coreboot Change-Id: I7ed5344fc8923e45e17c3e2a34371db6f80b079d Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31885 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-23mb/google/hatch/var/kindred:: Add enable signal for touch screenPhilip Chen
In the next board version, we will use GPP_D9 as enable control for touch screen. BUG=b:137133946 TEST=build Change-Id: I213d0878bfca1ce4059ec0393f59d8e79e1b274c Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35039 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-08-23mb/google/hatch/variants/kindred: Remove unused devicesPhilip Chen
sx9310 and FPMCU are not used in Kindred. BUG=none TEST=build Change-Id: Ied09d4bdb899d991131a75d7c848ff8637022f53 Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35038 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-08-23mb/google/rambi: update GPIO, RAM config for clapperMatt DeVillier
When upstreamed, GPIO and RAM config for clapper variant was taken from an older branch, leading some boards to fail to boot. Update based on chromium branch firmware-clapper-5216.199.B, commit 362d845 [baytrail: implement baytrail technical advisory 556192] Change-Id: I099ee2cd0833e4b9ab093663c4549c79ec044127 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-23lib: hardwaremain: Call exception_init() as soon as possibleAsami Doi
Call exception_init() before calling cbmem_initialize() because ARMv8 on QEMU uses an exception handler to detect a ram size. Signed-off-by: Asami Doi <d0iasm.pub@gmail.com> Change-Id: If010234a6576414e7e174c075b599a4aa4c19eab Reviewed-on: https://review.coreboot.org/c/coreboot/+/35022 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-23arch/x86/acpi: Add acpi_device_hidPatrick Rudolph
Allow a driver to return device specific _HID, which will be consumed by acpigen in order to generate proper SSDTs. Change-Id: Ibb79eb00c008a3c3cdc12ad2a48b88a055a9216f Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35006 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-23Revert "mb/google/octopus: Disable WLAN prior the entry of S5"Kane Chen
This reverts commit 38dbd6892080c93ccd24fbfa46ed5d9bdb7d9e99. Reason for revert: ODM helped to verify w/ BT runtime suspend disabled + revert this change And issue is gone. so I revert this change see the test result in https://partnerissuetracker.corp.google.com/issues/136039607#comment32 Change-Id: I248e9613cc39247a2bb88270c234c7d36d0ff60f Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-08-23soc/intel/cometlake: Add ISH Device IDBernardo Perez Priego
This Device ID is specific to CML, since it is obtained by reading ISH configuration RO register. In order to export ISH to kernel PCI device tree, this number must be included in list of devices supported. Change-Id: I6d245f1b3f0d0cfec77c31033eb20f147fd3d870 Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34687 Reviewed-by: Li1 Feng <li1.feng@intel.com> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-23mb/google/drallion: Add two variants - arcada_cml & sarien_cmlThejaswani Putta
These variants are to support the sarien and arcada boards with CML SOC, the drallion variant will be used to support the upcoming drallion board. Signed-off-by: Thejaswani Putta <thejaswani.putta@intel.com> Change-Id: I766bdccb6f8b6924d6ae1abbe57035f4ff1f6f17 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34887 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-08-23mb/google/kukui: Add panel for KodamaPeichao Wang
Declare the following panel for Kodama: - AUO B101UAN08.3 BUG=b:139699622 TEST=builds Kodama image and working properly Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I3f688ffd0ece6afac08d353ab5a6cf1cf876b32f Reviewed-on: https://review.coreboot.org/c/coreboot/+/35001 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-22AGESA: Restrict use of -fno-zero-initialized-in-bssKyösti Mälkki
Only apply the flag for libagesa -class. Change-Id: Ide46214d62b2b16e5e1deaa0796be784ed813095 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34885 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-22libpayload: usbmsc: Factor out usb_msc_force_init() functionJulius Werner
We're planning to have a use case with a custom USB device that implements the USB mass storage protocol on its bulk endpoints, but does not have the normal MSC class/protocol interface descriptors and does not support class-specific control requests (Get Max LUN and Bulk-Only Reset). We'd like to identify/enumerate the device via usb_generic_create() in our payload but then reuse all the normal MSC driver code. In order to make that possible, this patch factors a new usb_msc_force_init() function out of usb_msc_init() which will initialize an MSC device without checking its descriptors. It also adds some "quirks" flags that allow devices registered this way to customize behavior of the MSC stack. Change-Id: I50392128409cb2a879954f234149a5e3b060a229 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-08-22libpayload: usbmsc: Skip zero-length packets at end of dataJulius Werner
Some broken USB mass storage devices send another zero-length packet at the end of the data part of a transfer if the amount of data was evenly divisible by the packet size (which is pretty much always the case for block reads). This packet will get interpreted as the CSW and screw up the MSC state machine. This patch works around this issue by retrying the CSW transfer when it was received as exactly 0 bytes. This is the same mitigation the Linux kernel uses and harmless for correctly behaving devices. Also tighten validation of the CSW a little, making sure we verify the length before we read any fields and checking the signature in addition to the tag. Change-Id: I24f183f27b2c4f0142ba6c4b35b490c5798d0d21 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34485 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-22rockchip: Use new buffer_to/from_fifo32(_prefix) helpersJulius Werner
This patch changes the Rockchip SPI and I2C drivers to use the new buffer_from_fifo32()/buffer_to_fifo32_prefix() helpers when accessing their FIFOs (mostly just to demonstrate that/how the helpers work). Change-Id: Ifcf37c6d56f949f620c347df05439b05c3b8d77d Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-08-22Add buffer_to/from_fifo32(_prefix) helpersJulius Werner
Many peripheral drivers across different SoCs regularly face the same task of piping a transfer buffer into (or reading it out of) a 32-bit FIFO register. Sometimes it's just one register, sometimes a whole array of registers. Sometimes you actually transfer 4 bytes per register read/write, sometimes only 2 (or even 1). Sometimes writes need to be prefixed with one or two command bytes which makes the actual payload buffer "misaligned" in relation to the FIFO and requires a bunch of tricky bit packing logic to get right. Most of the times transfer lengths are not guaranteed to be divisible by 4, which also requires a bunch of logic to treat the potential unaligned end of the transfer correctly. We have a dozen different implementations of this same pattern across coreboot. This patch introduces a new family of helper functions that aims to solve all these use cases once and for all (*fingers crossed*). Change-Id: Ia71f66c1cee530afa4c77c46a838b4de646ffcfb Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-08-22mb/google/kukui: Add flapjack panelsHung-Te Lin
Add panels supported by flapjack. Change-Id: I547bf6f26bdbfed52a00c8cfb268d4e7c17ed889 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-22ACPI S3: Depend on RELOCATABLE_RAMSTAGEKyösti Mälkki
With RELOCATABLE_RAMSTAGE, S3 resume path only uses memory that is reserved from OS. So there is no need for low memory backup and recovery. Change-Id: If7f83711685ac445abf4cd1aa6b66c3391e0e554 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/26834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-22ACPI S3: Drop ACPI_HUGE_LOWMEM_BACKUPKyösti Mälkki
ACPI S3 resume path can only modify low memory where the non-relocatable ramstage resides, there is no need to maintain a bigger backup copy. Change-Id: Ifae41b51b359010ec02269c674936a87bd15623b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/15476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-22arch/x86: Add <arch/romstage.h>Kyösti Mälkki
Start with moving all postcar_frame related function declarations here from <arch/cpu.h>. Change-Id: I9aeef07f9009e44cc08927c85fe1862edf5c70dc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34911 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-21mb/google/kukui: Move panel description to CBFS filesHung-Te Lin
The panel description may be pretty large (for example, 1.3k for BOE TV101) due to init commands and we should only load the right config when display is needed. BUG=None TEST=make -j; boots and see display on Krane. Change-Id: I2560a11ecf7badfd0605ab189d57ec9456850f75 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-21mediatek/mt8183: add scp voltage initializationHsin-Hsiung Wang
Add scp voltage initialization. BUG=b:135985700 BRANCH=none Test=Boots correctly on Kukui and scp can boot up normally Change-Id: I5afb60af3c14490e20f28f1c089cfca42ddf7fcf Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-08-21cpu/intel/car: Make stack guards more useful on C_ENV_BOOTBLOCKArthur Heymans
With C_ENVIRONMENT_BOOTBLOCK, CONFIG_DCACHE_BSP_STACK_SIZE needs to be set to define a stack region that can be shared over all stages using CAR. It makes sense to use that Kconfig option's value instead of a hardcoded value. This will result in less false positives when the stack size is big, for instance with FSP using the coreboot stack. In many configurations with C_ENVIRONMENT_BOOTBLOCK the stack_base is at the base of CAR. If the stack grows too large it operates out of CAR, typically resulting in a hang. Therefore the stack guards are extended to cover 256 bytes at the base to at least provide a warning when the romstage is dangerously close of running out of stack. Change-Id: I2ce1dda4d1f254e6c36de4d3fea26e12c34195ff Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-08-21arch/x86: Rename some mainboard_romstage_entry()Kyösti Mälkki
These platforms use different signature for this function, so declare them with different name to make room in global namespace. Change-Id: I77be9099bf20e00ae6770e9ffe12301eda028819 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34909 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-21payloads/tianocore: Enable UEFIPayloadLijian Zhao
corebootpayload package in upstream TianoCore was replaced with UEFIPayload, add external payload build option for UEFIPayload. BUG=N/A TEST=Select TianoCore payload as UEFIPayload, build and able to boot up on QEMU q35 after PCIE_BASE set. Change-Id: I0b7785fde9f4113b2cd91323ac0358b229c5a6e6 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34459 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-21soc/intel/common/smm: Add missing printk statementTim Wawrzynczak
SMI trap handler was missing a printk statement, which caused Coverity to flag "data &= mask;" as a redundant operation. Change-Id: I71da74e5e08e7d7e6d61c1925db19324efd73f0a Found-by: Coverity CID 1381621 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-08-21vboot: update vboot2 functions to use new vb2_error_tJoel Kitching
To make explicit when vboot2 error codes should be returned, use the new vb2_error_t type on all functions which return VB2_ERROR_* constants. Additionally, add required vboot submodule commit id e6700f4c: 2019-07-31 14:12:30 +0800 - (vboot: update vboot2 functions to use new vb2_error_t) NOTE: This patch was merged separately on the Chromium tree: https://chromium-review.googlesource.com/c/1728499 BUG=b:124141368, chromium:988410 TEST=make clean && make test-abuild BRANCH=none Change-Id: I804c2b407e496d0c8eb9833be629b7c40118415c Signed-off-by: Joel Kitching <kitching@google.com> Cq-Depend: chromium:1728292 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34860 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-21Update vboot submodule to upstream masterJoel Kitching
Updating from commit id 9c906110: 2019-08-06 06:07:01 +0000 - (vboot/tpm: fix return type inconsistencies) to commit id a5afd01f: 2019-08-08 11:02:44 -0700 - (Minor fixes for clang) This brings in 6 new commits. Change-Id: Ic334ce8a5f24a0119fa2aaf000ce76c4c9e4932a Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-21soc/intel/common: use PAD_BUF() inside PAD_CFG_* macrosMaxim Polyakov
Use PAD_BUF() to disable the input/output buffer inside PAD_CFG_* macros instead PAD_CFG0_RX_DISABLE/PAD_CFG0_TX_DISABLE [1] https://review.coreboot.org/c/coreboot/+/34337 Change-Id: I19fd993e1f60d80eab0ce51eaed5e74ce1c6a34d Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-21soc/intel/common: gpio_defs: set trig to disable in PAD_NCMaxim Polyakov
There is no need to change the default value for the RX Level/Edge Configuration parameter if the pad is not used/connected (PAD_NC) Change-Id: Ie7eee83fba9320d52240166371fe0c757dbdce49 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-21AMD fam10: Remove HAVE_ACPI_RESUME supportKyösti Mälkki
Change-Id: I62bbba8cfe515b3cae413582ff8d062a20e6741b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/15474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-21soc/intel/common: Set controller state to active in uart initUsha P
Set the controller state to D0 during the uart init sequence, this ensures the controller is up and active. One more argument "const struct device *dev" has been added to uart_lpss_init function. BUG=b:135941367 TEST=Verify no timeouts seen during UART controller enumeration sequence in CML, ICL and APL platforms Change-Id: Ie91b502a38d1a40a3dea3711b015b7a5b7ede2db Signed-off-by: Usha P <usha.p@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34810 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-21mediatek/mt8183: Enlarge PRERAM_CBFS_CACHE regionTristan Shieh
Enlarge PRERAM_CBFS_CACHE region from (16K - 4) to (48K - 4) bytes to decompress and load more data from CBFS in romstage. BUG=b:134351649 BRANCH=none TEST=emerge-kukui coreboot Change-Id: Idc23a67c886718e910ca3c50468e5793f19c8d66 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34896 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-21mediatek/mt8183: Overlap decompressor, verstage and romstageTristan Shieh
Since SRAM space is too small to fit all needed features, enable VBOOT_RETURN_FROM_VERSTAGE and overlap decompressor, verstage and romstage to gain more space. BUG=b:134351649 BRANCH=none TEST=emerge-kukui coreboot Change-Id: Ibe336cf93b01fa2ea57b4c2e0a89685424878c91 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34871 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-21mediatek: Use GPIO based SPI CSYu-Ping Wu
Some boards (e.g., Kukui) need GPIO based CS for SPI0. This patch changes the pinmux and binds the pins to the correponding SPIs. When using GPIO based SPI CS, we need to manually make CS log/high before/after SPI transactions. BUG=b:132311067 BRANCH=none TEST=Verified that b/132311067 is irreproducible Change-Id: I61653fb19242b6ee6be9a45545a8b66e5c9c7cad Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-21lib/bootsplash: Log bootsplash dimensions and framebuffer dimensionsJohanna Schander
The bootsplash.jpg needs to match the framebuffer resolution. Configuration errors are more visible if they can be compared easily. Changed message to be always printed: "Setting up bootsplash in ${FRAMEBUFFER_RESOLUTION}" Added message: "Bootsplash image resolution: ${IMAGE_RESOLUTION}" Change-Id: Ib4a06d53c0134b99d3e9e6d3eda9fa30fca9ef7d Signed-off-by: Johanna Schander <coreboot@mimoja.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34598 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-21ec/lenovo/h8: Add option to set F1-F12 as primary functionIru Cai
Tested on Lenovo ThinkPad T440p. Change-Id: I83dc2c19341475abeeacd374a1b6cf152ec9b497 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-08-21mb/google/kohaku: Correct DPTF temp sensor IDsSeunghwan Kim
This change corrects DPTF temperature sensor IDs BUG=none BRANCH=none TEST=none Change-Id: I25c76b0e938b2568da1833a4a5685ed36c00275e Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34985 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-21intel/fsp1_0,baytrail,rangeley: Tidy up use of preprocessorKyösti Mälkki
Remove cases of __PRE_RAM__ and other preprocessor guards. Change-Id: Id295227df344fb209d7d5fd12e82aa450198bbb8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34928 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: David Guckian Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-21southbridge/intel: Tidy up preprocessor and headersKyösti Mälkki
Change-Id: I52a7b39566acd64ac21a345046675e05649a40f5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34980 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-21vboot: use vboot2 API to set initial secdatak valueJoel Kitching
Previously, the initial value for secdatak was embedded in secdata_tpm.c as a uint8_t array. Switch to using vb2api_secdatak_create instead, and write the value in ctx->secdatak. Remove an unnecessary call to vb2api_secdata_create in _factory_initialize_tpm. BUG=b:124141368, chromium:972956 TEST=make clean && make test-abuild BRANCH=none TEST=Check that size and value of initial secdatak has not changed. Apply the patch below and check for this output: _factory_initialize_tpm():266: _factory_initialize_tpm: secdatak sizes are identical? 1 _factory_initialize_tpm():269: _factory_initialize_tpm: secdatak values are identical? 1 diff --git a/src/security/vboot/secdata_tpm.c b/src/security/vboot/secdata_tpm.c index ff62185107..c1818b482f 100644 --- a/src/security/vboot/secdata_tpm.c +++ b/src/security/vboot/secdata_tpm.c @@ -148,6 +148,18 @@ static uint32_t write_secdata(uint32_t index, return TPM_E_CORRUPTED_STATE; } +/* + * This is derived from rollback_index.h of vboot_reference. see struct + * RollbackSpaceKernel for details. + */ +static const uint8_t secdata_kernel[] = { + 0x02, + 0x4C, 0x57, 0x52, 0x47, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, + 0xE8, +}; + /* * This is used to initialize the TPM space for recovery hash after defining * it. Since there is no data available to calculate hash at the point where TPM @@ -250,6 +262,11 @@ static uint32_t _factory_initialize_tpm(struct vb2_context *ctx) * indication that TPM factory initialization was successfully * completed. */ + VBDEBUG("%s: secdatak sizes are identical? %d\n", __func__, + sizeof(secdata_kernel) == sizeof(ctx->secdatak)); + VBDEBUG("%s: secdatak values are identical? %d\n", __func__, + memcmp(secdata_kernel, ctx->secdatak, + sizeof(secdata_kernel)) == 0); RETURN_ON_FAILURE(set_kernel_space(ctx->secdatak)); if (CONFIG(VBOOT_HAS_REC_HASH_SPACE)) @@ -452,7 +469,7 @@ uint32_t antirollback_read_space_firmware(struct vb2_context *ctx) /* Read the firmware space. */ rv = read_space_firmware(ctx); - if (rv == TPM_E_BADINDEX) { + if (true) { /* * This seems the first time we've run. Initialize the TPM. */ Change-Id: I74261453df6cc55ef3f38d8fb922bcc604084c0a Signed-off-by: Joel Kitching <kitching@google.com> Cq-Depend: chromium:1652874, chromium:1655049 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33386 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-21mb/google/octopus/variants/bloog: Add G2Touch touchscreen supportTony Huang
Add G2Touch touchscreen support for blooglet. BUG=b:139725457 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage, and check touchscreen by evtest. Change-Id: I6ebcc60f58857d8b28446932787742c2740fadd8 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-21chromeec: Depend on events_copy_b to identify the wake sourceRavi Chandra Sadineni
google_chromec_get_event() depends on the main copy of EC which is used by ACPI subsytem in the kernel for querying events. google_chromeec_get_event() also clears the event from EC. Thus if the kernel has to identify the wake source, it has no way to do that. Thus instead depend on events_copy_b to log the wake source. Please look at go/hostevent-refactor for more info. BUG=b:133262012 BRANCH=None TEST=Hack hatch bios and make sure hostevent log is correct. Change-Id: I39caae2689e0c2a7bec16416978877885a9afc6c Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34801 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-21mb/google/kahlee/treeya: Update Raydium TS device ACPI nodesChris Wang
Update I2C irq to EDGE trigger for Raydium TS. BUG=b:135551210 BRANCH=master TEST=emerge-grunt coreboot Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: Ic0a00a31eefa756b6e4ee9aac8d25c1be5ac9195 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-08-21mb/google/kahlee/treeya: remove keyboard backlight supportChris Wang
Treeya doesn't support the keyboard backlight. BUG=b:135551210 BRANCH=grunt TEST=emerge-grunt coreboot Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I02dfc77d3cb7ac00b3f10d577d92775db99c1bdf Reviewed-on: https://review.coreboot.org/c/coreboot/+/34903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward Hill <ecgh@chromium.org>
2019-08-21mb/google/kahlee/treeya: Use GPIO_10 for EC_SYNC_IRQChris Wang
Use AGPIO 10 as the EC sync interrupt for MKBP events for sensor data. Reference to Aleena project. BUG=b:135551210 BRANCH=grunt TEST=emerge-grunt coreboot Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: Ie0b719ebce90710bca2109b7ff255e19329f9cac Reviewed-on: https://review.coreboot.org/c/coreboot/+/34902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward Hill <ecgh@chromium.org>
2019-08-21mb/google/kahlee/treeya: Add EC_ENABLE_TBMC_DEVICEChris Wang
Enable ACPI TBMC notification on tablet mode change to support convertible treeya devices. BUG=b:135551210 BRANCH=grunt TEST=emerge-grunt coreboot Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: Id0618c8df66267b88008dc5057892de6b530629f Reviewed-on: https://review.coreboot.org/c/coreboot/+/34899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward Hill <ecgh@chromium.org>
2019-08-21mb/google/kahlee/treeya: Enable Synaptics touchpad andPeichao Wang
Synaptics touchscreen BUG=b:139699619 TEST=emerge-grunt coreboot chromeos-bootimage flash bios image to DUT and make sure the touchpad and touchscreen can work Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I002badd49e678e1c32c802352923ca51efb45cef Reviewed-on: https://review.coreboot.org/c/coreboot/+/35000 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-08-20Makefile.inc, payloads: Enable -WvlaJacob Garber
Variable length arrays are dangerous, so let's make sure they don't sneak back into coreboot or any of the payloads. Change-Id: Idf2488cf0efab51c9569a3789ae953368b61880c Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33846 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-20nb/via/vx900: Ensure memory size and base are in rangeJacob Garber
We need to ensure uma_memory_size and uma_memory_base stay within a 32-bit address range. Both of these variables are 64 bits wide, so it is simplest to use 64 bit math when doing the bit shifts and then check if they are in range after. Change-Id: Idd180f31e8cff797a6499b12bc685daa993aae05 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1229665, 1229666 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-08-20mb/ocp/monolake: Add IPMI CMOS clear supportJohnny Lin
coreboot would clear CMOS by request via IPMI command, for example BMC can issue "bios-util server --boot_order enable --clear_CMOS" to set the request and reboot the system, then coreboot would clear CMOS on the next boot. Tested on Mono Lake Change-Id: I21d44557896680cfac3c3b6d83e07b755b242cad Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34857 Reviewed-by: Johnny Lin Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-20mb/google/hatch: Skip SD card controller WP pin configuration from FSPAamir Bohra
BUG=b:123907904 TEST=SD WP GPIO PAD retains coreboot configuration and FSP ScsSdCardWpPinEnabled UPD is set to 0. Change-Id: I30367cda09cc8c88abb649f70b4587889083f9af Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34901 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-20soc/intel/cnl: Add provision to configure SD controller write protect pinAamir Bohra
Cometlake FSP allows provison to configure SD controller WP pin, As some of board design might choose not to use the SD WP pin from SD card controller. This implementation adds a config that allows to enable/disable SD controller WP pin configuration from FSP. BUG=b:123907904 Change-Id: Ic1736a2ec4b9370d23a8e3349603eb363e6f59b9 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34900 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-20vc/amd/cimx/sb800: Remove old strict-aliasing workaroundJacob Garber
C strict aliasing rules state that it is undefined behaviour to access any pointer using another pointer of a different type (with several small exceptions). Eg. uint64_t x = 3; uint16_t y = *((uint16_t *)&x); // undefined behaviour From an architectural point of view there is often nothing wrong with pointer aliasing - the problem is that since it is undefined behaviour, the compiler will often use this as a cop-out to perform unintended or unsafe optimizations. The "safe" way to perfom the above assignment is to cast the pointers to a uint8_t * first (which is allowed to alias anything), and then work on a byte level: *((uint8_t *)&y) = *((uint8_t *)&x); *((uint8_t *)&y + 1) = *((uint8_t *)&x + 1); Horribly ugly, but there you go. Anyway, in an attempt to follow these strict aliasing rules, the ReadMEM() function in SB800 does the above operation when reading a uint16_t. While perfectly fine, however, it doesn't have to - all calls to ReadMEM() that read a uint16_t are passed a uint16_t pointer, so there are no strict aliasing violations to worry about (the WriteMEM() function is exactly similar). The problem is that using this unnecessary workaround generates almost 50 false positive warnings in Coverity. Rather than manually ignore them one-by-one, let's just remove the workaround entirely. As a side note, this change makes ReadMEM() and WriteMEM() now match their definitions in the SB900 code. Change-Id: Ia7e3a1eff88b855a05b33c7dafba16ed23784e43 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34783 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-08-20mb,autoport: Fix GCC 9 Port_List build errorJacob Garber
Port_List is an array of 8 elements, and GCC 9 is warning that there are no 'others' when all 8 elements are explicitly initialized, which is causing the build to fail. Remove the 'others => Disabled' clause to silence this. Change-Id: Id082e7a76641438f3fb4c4d976dbd254a7053473 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34918 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-20nb/amd/pi,sb/amd/sr5650: Remove unnecessary allocationJacob Garber
add_ivrs_device_entries() is a recursive function, and each recursive call is passed a pointer to a root_level variable declared outside the function. In an attempt to make the function self-contained, the initial call is made with the root_level pointer set to NULL, and then the function attempts to detect this and allocate a root_level variable for the rest of the calls. This makes memory management very tricky - for example, the pi code incorrectly attempts to free the root_level variable at the end of *each* recursive call, which only avoids being a double-free because free() in coreboot is currently a no-op. Let's keep life simple and declare root_level as a local variable outside the first function call instead. Change-Id: Ifd63ee368fb89345b9b42ccb86cebcca64f32ac8 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1362811 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34387 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-20util/nvidia/cbootimage: Update to upstream masterJacob Garber
This brings in 4 new commits from the upstream repository. 65a6d94 Free image buffer on read error 9de64c7 Fix various abort(), crashes, and memory errors 7c9db58 Bump to version 1.8 3b3c3cc Use C99 uintXX_t instead of implementation-specific u_intXX_t types Change-Id: If949309a7481537de6529c205fe745d5509906a9 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>