summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-02-05mainboard/asus/kcma-d8: Copy ASUS KGPE-D16 for initial support workTimothy Pearson
Also updated KGPE-D16 strings to KCMA-D8 throughout the copy to work around Jenkins failures caused by an unmodified clone. Change-Id: I943e81c8c2987a8333fc2a1cdb3675abf2d90cf1 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13521 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05mainboard/asus/kgpe-d16: Add CPB control CMOS optionTimothy Pearson
Change-Id: I28ad2298ad4dfb428dcd41a4f00db88c5e817cd7 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13173 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-02-05cpu/amd/fam10h-fam15h: Honor CMOS option to disable CPB (core boost)Timothy Pearson
On certain systems and CPUs Core Performance Boost (CPB) may cause sporadic system lockups. This issue is also somewhat known on the various proprietary BIOSes, therefore it seems to be a hardware incompatibility when present. Allow the user to disable CBP if needed. Change-Id: Id6395d067d48963f6c084ad0bf79e23419af24d8 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13172 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-02-05nb/amd/mct_ddr3: Fix RDIMM training failure on Fam15hTimothy Pearson
Certain registered DIMMs failed training due to an error likely introduced during historical rebase. Ensure that the SubMemclkRegDly bit is set according to BKDG recommendations on Family 15 processors. Change-Id: I24c95265dada9eabf4df280b6f2b4a1eb9cecaf1 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13148 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05nb/amd/mct_ddr3: Work around RDIMM training failureTimothy Pearson
Under certain conditions, not elucidated in the BKDG, an extra memclock of CAS write latency is required. The only reliable way I have found to detect when this is required is to try training without the delay, and if DQS position training fails, adding the delay and retraining. This is probably related in some form or another to the badly broken DQS Write Early algorithm given in the BKDG. Change-Id: Idfaca1b3da3f45793d210980e952ccdfc9ba1410 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13531 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05cpu/amd/fam10h-15h: Set PowerStepUp/PowerStepDown on Fam15hTimothy Pearson
Multilink Family 15h processors were being configured with an incorrect PowerStepUp/PowerStepDown value. Set the value according to the BKDG, and clean up the terrible formatting of the power_up_down() function that led to the incorrect values being overlooked until now. Also change u32 declarations to uint32_t in modified functions. Change-Id: I16e1f5205d6b5f349a3e7167dea04c9eefda4684 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13174 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05mainboard/asus/kgpe-d16: Update power LED handlingTimothy Pearson
- Stop blinking when coming out of standby. - Remove code to set blink when going into S3. This never worked correctly. Change-Id: I958990f3203d3cbe7ae64833800d631c1034327f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13171 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-053rdparty/chromeec: Add Chrome EC firmware sourcesPatrick Georgi
Note that this is a manually added commit id (to get the CrEC fixes in that are necessary for building outside cros_sdk), so it will probably fail. Change-Id: Idc15cf268c663ae49b209b92b198c9a4d122c7e3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13546 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04Documentation: Add x86 bootblock supportLee Leahy
Document what is involved with adding the bootblock support. TEST=None Change-Id: I6c8cc38e1b9346b4962588b33ca5e4ab8eac24c3 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13441 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-04mainboard/intel/galileo: Add Intel Galileo Gen 2 SupportLee Leahy
Add the files to build soc/intel/quark and mainboard/intel/galileo for a minimal coreboot image. Please note that this configuration does not run. Include HTML documentation for the Galileo Gen 2 board. Testing is successful if build completes successfully. TEST=Build for Galileo Change-Id: Idd3fda1b8ed9460fa8c92e6dcaa601c3c9f63a36 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13507 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-04skylake boards: disable ACPI PM TimerArchana Patni
These devicetree patches set the ACPI PM Disabled variable to 1. This will disable the ACPI PM timer and remove from FADT table. BRANCH=none BUG=chrome-os-partner:48646 TEST=Build for skylake board with the PmTimerDisabled policy in devicetree set to 1. iotools mmio_read32 0xfe0000fc should return 0x2. cat /sys/devices/system/clocksource/clocksource0/available_clocksource should list only "tsc hpet". acpi_pm should be removed from this list. Change-Id: Ia66f37e13f0f2f527651418b8b5c337b56c25c7f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: db3e8130495038850c7034b89701b4a5fcf88dce Original-Change-Id: Ib1b876cfa361b8cbdde2f9e212e3da4fd724e498 Original-Signed-off-by: Archana Patni <archana.patni@intel.com> Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319362 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13589 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04intel/skylake: disable ACPI PM Timer to enable XTAL OSC shutdownArchana Patni
Keeping ACPI PM timer alive prevents XTAL OSC shutdown in S0ix which has a power impact. Based on a DT variable, this patch disables the ACPI PM timer late in the boot sequence - disabling earlier will lead to a hang since the FSP boot flow needs this timer. This also hides the ACPI PM timer from the OS by removing from FADT table. Once the ACPI PM timer is disabled, TCO gets switched off as well. BRANCH=none BUG=chrome-os-partner:48646 TEST=Build for skylake board with the PmTimerDisabled policy in devicetree set to 1. iotools mmio_read32 0xfe0000fc should return 0x2. cat /sys/devices/system/clocksource/clocksource0/available_clocksource should list only "tsc hpet". acpi_pm should be removed from this list. Change-Id: Icfdc51bc33b5190a55196d67e18afdaaa2f9b310 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 18bcb8a434b029295e1f1cc925e2b47e79254583 Original-Change-Id: Ifebe8bb5a7978339e07e4e12e174b9b978135467 Original-Signed-off-by: Archana Patni <archana.patni@intel.com> Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319361 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13588 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04intel/skylake: unconditionally set SPI controller BARAaron Durbin
The setting of the SPI controller BAR was conditional on the nominal frequency being set. Therefore, that doesn't mean the SPI BAR is set on all boots. Move the setting of the BAR in the southbridge_bootblock_init() which is called prioer to cpu_bootblock_init(). BUG=chrome-os-partner:44827 BRANCH=None TEST=Confirmed spibar is always set on glados. Change-Id: Ia58447d70f5e39a4336d4d08593f143332de833a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 56fff7c25c2eb0ccd90e08f71c064b83c66640f8 Original-Change-Id: I1e0cff783f4b072b80589a3a84703a262b86be3a Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/319461 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13587 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04google/chromeos/vboot2: honor boot region device sizeAaron Durbin
Vboot keeps track of the size of the hashed region in each RW slot. While that size was being used to calculate the hash it wasn't being honored in restricting the access within the FMAP region for that RW slot. To alleviate that create a sub region that covers the hashed data for the region in which we boot from while performing CBFS accesses. BUG=chrome-os-partner:49764 BUG=chromium:445938 BRANCH=glados TEST=Built and booted chell with cbfstool and dev-util patches. Change-Id: I1a4f45573a6eb8d53a63bc4b2453592664c4f78b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4ac9e84af5b632e5735736d505bb2ca6dba4ce28 Original-Change-Id: Idca946926f5cfd2c87c4a740ad2108010b6b6973 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324093 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13586 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04google/lars: perform early init for CAR *stageAaron Durbin
In order to support both separate verstage and a verified boot after romstage one needs to ensure the proper GPIO and EC configuration been complete. Therefore, move that logic to car_mainboard_post_console_init() in car.c file which gets called in the early flow of a CAR stage (either verstage or romstage). BUG=chrome-os-partner:44827 BRANCH=glados TEST=None Change-Id: I331f25ad4764cab972af7198f6154f604d2dbeae Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2c1cb04645cbf34696e6adf48acec9d396e87ca9 Original-Change-Id: I8d14ea16b2d07bbf04c5c33e4205a85d9f21847b Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324075 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13585 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04intel/kunimitsu: perform early init for CAR *stageAaron Durbin
In order to support both separate verstage and a verified boot after romstage one needs to ensure the proper GPIO and EC configuration been complete. Therefore, move that logic to car_mainboard_post_console_init() in car.c file which gets called in the early flow of a CAR stage (either verstage or romstage). BUG=chrome-os-partner:44827 BRANCH=glados TEST=Built kunimitsu w/ separate verstage. Change-Id: If34cae5516a6df7f72f1f57cab495db70787177e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 543155665e1b05efe82c7440c124a5c83c656aa6 Original-Change-Id: I7281c4373fcbaaf0beedaa63dcf0dedb5316349f Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324074 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13584 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04google/glados: perform early init for CAR *stageAaron Durbin
In order to support both separate verstage and a verified boot after romstage one needs to ensure the proper GPIO and EC configuration been complete. Therefore, move that logic to car_mainboard_post_console_init() in car.c file which gets called in the early flow of a CAR stage (either verstage or romstage). BUG=chrome-os-partner:44827 BRANCH=glados TEST=Built glados w/ separate verstage and booted. Change-Id: I626a500c183d21f94d976e24f09af15a242fba9c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b564514a8b93f53a919fcdac3589e30dbac82124 Original-Change-Id: Icc989ec5700b3f1a144a6b41198b7dd2c2aac6f7 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324073 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13583 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04google/chell: perform early init for CAR *stageAaron Durbin
In order to support both separate verstage and a verified boot after romstage one needs to ensure the proper GPIO and EC configuration been complete. Therefore, move that logic to car_mainboard_post_console_init() in car.c file which gets called in the early flow of a CAR stage (either verstage or romstage). BUG=chrome-os-partner:44827 BRANCH=glados TEST=Built chell w/ separate verstage and booted. Change-Id: Ic728c2904006376fdc2b27b512f72173a2260be3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 42d190af8996fea894305ebe686afbfda5f2b8a5 Original-Change-Id: I95aeb97737d0ddfa6c53269c9d14db16ed5e47cc Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324072 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13582 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04google/chromeos: guard cbmem_find() in verstage and bootblockAaron Durbin
When vboot_handoff_flag() is called in the bootblock or a separate verstage there's no memory nor the possibility of dram coming online. Therefore, don't bother to attempt call cbmem_find(). BUG=chrome-os-partner:44827 BRANCH=glados TEST=Built chell with separate verstage which pulls in vboot_common.c dependency. No more linking errors w/ cbmem_find() not being around. Change-Id: I494c93adc1c00459fdfaa8ce535c6b4c884ed0fb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 414ce6aeaff657dc90289b25e5c883562189b154 Original-Change-Id: I8a5f2d154026ce794a70e7ec38883fa3c28fb6e7 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324070 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13580 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-04lib: add bootmode.c to verstageAaron Durbin
Some of the functions within bootmode.c may be required by boards in verstage. Therefore, allow this file to be built in verstage. BUG=chrome-os-partner:44827 BRANCH=glados TEST=Built chell w/ bootmode.c dependencies in separate verstage. Change-Id: Id291c1b5cc6594c3ee16c7c3385e682addc0efb6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 084b620e12e7f948087786c0e34d5999a73137a5 Original-Change-Id: I2207819ec1490767cb1cf4b92e34e714783c1c22 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324071 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13581 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04intel/skylake: implement vboot_platform_prepare_reboot()Aaron Durbin
In order to not reboot loop in the face of failed vboot verification on resume set the PM1 control register to indicate S5. After the subsequent cold reset the PM1 control register will indicate S5 as it should. BUG=chrome-os-partner:46049 BRANCH=glados TEST=On chell injected failed vboot verification. Ensured a reboot loop doesn't ensue. Change-Id: Ie5e9e3f6441a217a5e02b4d78aaf21f8249b8a43 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a63b57d7bc59bcaf5518f7cc4afccd3d5da6df1c Original-Change-Id: I5e467854bf065a138bd46e476a7e7088f51454ca Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/323504 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13579 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04intel/skylake: implement vboot_platform_is_resuming()Aaron Durbin
To allow skylake platforms to run with verified memory init code the chipset needs to implement vboot_platform_is_resuming() so that the vboot code can make proper decisions. BUG=chrome-os-partner:46049 BRANCH=glados TEST=Suspended and resumed on chell. Also, tested with an EC build which returns a bad hash to ensure that is properly caught. Change-Id: I508a339c07dcc9e7c56a0df4201660827b3ae07a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a3e11789339bcd8fc8fc99b704c6a1110acf5302 Original-Change-Id: I40264019eb28e85795258112c720056a6a3fc523 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/323503 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13578 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04google/chromeec: implement vboot_(save|retrieve)_hash APIAaron Durbin
For x86 systems which resume through the reset vector one needs to ensure the the RW slot taken at resume time matches the one at boot time. To that end, allow Chrome OS EC to supply the plumbing to vboot for storing and retrieving the RW slots' hash digest using the vstore backend. BUG=chrome-os-partner:46049 BRANCH=glados TEST=Suspended and resumed on chell. Also, tested with an EC build which returns a bad hash to ensure that is properly caught. Change-Id: Ib056f7e6b3386447ed1ff95c740ef5b4544f9049 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9c78546b1d6298a4c397a587c564df6d9d097e75 Original-Change-Id: I86c96a4092deab2dfa51b3043b9dba16b6a4c201 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/323502 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13577 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04util/cbmem: Add new depthcharge timestampsJulius Werner
This patch adds strings for the timestamp changes and additions in the Chrome OS bootloader (depthcharge). See http://crosreview.com/323783 for details and justification. BRANCH=none BUG=None TEST=Booted Oak, confirmed that cbmem output includes new timestamps. Change-Id: I9ad68edca660f4e4286e680316b4e14f1259d1bc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c1b1f6d669f62217ed701cd3561b9d14973d890a Original-Change-Id: I7256ca62c69f2ab7279fd2656fbbfa610e04fc44 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/323871 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13576 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04chromeos/vboot: allow platform to hook into vboot_reboot()Aaron Durbin
Sometimes it's necessary for the platform to perform clean up tasks prior to reboot when employing vboot. For example, x86 systems that resume and do vboot verification may need to clear their sleep control register prior to doing a cold reset so that the next boot doesn't appear to be a resume. Allow that hook by introducing vboot_platform_prepare_reboot(). BUG=chrome-os-partner:46049 BRANCH=glados TEST=Ensure vboot_platform_prepare_reboot() called from vboot_reboot(). Change-Id: I622c9181d9fa3048204e3df3223d5dd4b458abca Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f31ffc40bde002dec398fd4dd9d2ee9d65df0d7b Original-Change-Id: I97318cec34494a7fc4b1ecf2cb22715d20e730ff Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/323501 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13575 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04chromeos/vboot: provide support for x86 memory init verificationAaron Durbin
For x86 systems which resume through the reset vector one needs to ensure the the RW slot taken at resume time matches the one at boot time. The reason is that any assets pulled out of the boot media need to match how the platform previously booted. To do that one needs obtain the hash digest of the chosen slot, and it needs to be saved in a secure place on the normal boot path. On resume one needs to retrieve the hash digest back to compare it with the chosen slot. If they don't match resuming won't be possible. BUG=chrome-os-partner:46049 BRANCH=glados TEST=Suspended and resumed on chell. Also, tested with an EC build which returns a bad hash to ensure that is properly caught. CQ-DEPEND=CL:323460 Change-Id: I90ce26813b67f46913aa4026b42d9490a564bb6c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 01a42c0ecfc6d60d1d2e5e36a86781d91d5c47a9 Original-Change-Id: I6c6bdce7e06712bc06cc620a3d7a6a6250c59c95 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/323500 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13574 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-043rdparty/vboot: update to current masterPatrick Georgi
It provides a few extensions to the API that are required, such as vb2api_check_hash_get_digest() Change-Id: Ib4d8bdc29751f51f0f7532376175490a0ffd84b3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13590 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04intel/skylake: Display ME firmware status before os bootDhaval Sharma
Display ME firmware status before os boot. Specifically this patch reads out the ME hfsts1 and hfsts2 status registers that provide information about overall ME health before device gets disabled. This change reused most of the code from bdw me_status implementation. BUG=chrome-os-partner:47384 BRANCH=glados TEST=Builds and Boots on FAB4 SKU2/3. Can observe me status table Change-Id: Ia511c4f336d33a6f3b49a344bfbaea6ed227ffeb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a9d0fb411c3921654f0fdcea2a3d4ee601987af2 Original-Change-Id: Ied7e2dcd9a1298a38dfe1eda9296b9ca8eccf6b1 Original-Credits-to: Duncan Laurie <dlaurie@chromium.org> Original-Signed-off-by: Dhaval Sharma <dhaval.v.sharma@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/323260 Original-Commit-Ready: dhaval v sharma <dhaval.v.sharma@intel.com> Original-Tested-by: dhaval v sharma <dhaval.v.sharma@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13573 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04google/chromeec: Add temporary storage interfaceDuncan Laurie
Add support functions for the Chrome EC temporary storage interface. BUG=chrome-os-partner:46049 BRANCH=none TEST=tested on glados with modified coreboot Change-Id: Id2bc46df9cb2d82b15e3309e78d07407a622b6f0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a7e6f693666b162e11eb0611715f10a8f465ad88 Original-Change-Id: Ieefabfc5bcb9d8a5064f0da967c46d0f377ca320 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/315217 Original-Commit-Ready: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13572 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04google/chromeec: Update EC command headerDuncan Laurie
Update to the latest EC command header. BUG=chrome-os-partner:46049 BRANCH=none TEST=emerge-glados coreboot Change-Id: I132f91b31931ed40c20c0f5dbbf4449663768418 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5e6d9d51cfe99fe7c3806d1f74ea67b2d2ed5e7e Original-Change-Id: I3c2e268689d64683f4a138e20f518e6eda49a138 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/315216 Original-Commit-Ready: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13571 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04soc/intel/quark: Add minimal Quark SoC X1000 filesLee Leahy
Add the files for minimal Quark X1000 SoC support: * Declare pei_data structure * Declare sleep states and chipset_power_state structure * Specify top of memory * Empty FspUpdVpd.h file TEST=None Change-Id: If741f84904394780e1f29bd6ddbd81514c3e21c9 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13439 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-04libpayload: Add timer driver for armada38xRuilin Hao
Add timer driver for armada38x BUG=chrome-os-partner:47462 TEST=emerge-cyclone libpayload BRANCH=tot Change-Id: Iefb6d1fcb907edb54d55ba8addfb66329af6c3c7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: cd467160ecab050a541a445c2afab9e6bc625635 Original-Change-Id: Id42bafdbc34295b6f8afe5610fb3bab0e0e1b6e8 Original-Signed-off-by: Ruilin Hao <rlhao@marvell.com> Original-Reviewed-on: https://chromium-review.googlesource.com/313343 Original-Commit-Ready: Kan Yan <kyan@google.com> Original-Tested-by: Kan Yan <kyan@google.com> Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Yuji Sasaki <sasakiy@chromium.org> Reviewed-on: https://review.coreboot.org/13114 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04soc/marvell/armada38x: Add i2c driver for armada38xRuilin Hao
Port i2c driver from uboot to coreboot BUG=chrome-os-partner:47462 TEST=emerge-cyclone coreboot BRANCH=tot Change-Id: I8ce2a965acaed68ad0f0518648490ec471c6810b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4c2e9592662787ebed1d0aa8cafaa00fd12c2e9c Original-Change-Id: If791228edf29405fa4b2f959a21510bd7da9865b Original-Signed-off-by: Ruilin Hao <rlhao@marvell.com> Original-Reviewed-on: https://chromium-review.googlesource.com/313342 Original-Commit-Ready: Kan Yan <kyan@google.com> Original-Tested-by: Kan Yan <kyan@google.com> Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/13113 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04soc/marvell/armada38x: Add gpio driver for armada38xRuilin Hao
Port gpio driver from uboot to coreboot BUG=chrome-os-partner:47462 TEST=None BRANCH=tot Change-Id: Ib6cfbb6e44cb642c7af937778076a51d405ff4a2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5cf94502faad96147d4a4adb42eb13edb64a6439 Original-Change-Id: Ia2e081a85347e2fc8bb365ca527ee2ee32af86f1 Original-Signed-off-by: Ruilin Hao <rlhao@marvell.com> Original-Reviewed-on: https://chromium-review.googlesource.com/313341 Original-Commit-Ready: Kan Yan <kyan@google.com> Original-Tested-by: Kan Yan <kyan@google.com> Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Kan Yan <kyan@google.com> Original-Reviewed-by: Yuji Sasaki <sasakiy@chromium.org> Reviewed-on: https://review.coreboot.org/13112 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04soc/marvell/armada38x: Add spi driver for armada38xRuilin Hao
Port spi driver from uboot to coreboot BUG=chrome-os-partner:47462 TEST=None BRANCH=tot Change-Id: I747be7001f4cfb8eec33e8e5bdef3fe5bb0eb2ca Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9fbc5c2feb6ffacb54ed94e5c7b94b38be2b2ded Original-Change-Id: Ibea9a050ac8bdab6ce4eeb07accde53aeadade5f Original-Signed-off-by: Ruilin Hao <rlhao@marvell.com> Original-Reviewed-on: https://chromium-review.googlesource.com/313340 Original-Commit-Ready: Kan Yan <kyan@google.com> Original-Tested-by: Kan Yan <kyan@google.com> Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Kan Yan <kyan@google.com> Original-Reviewed-by: Yuji Sasaki <sasakiy@chromium.org> Reviewed-on: https://review.coreboot.org/13111 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04soc/marvell/armada38x: Add generic support for armada38xRuilin Hao
Skeleton for soc armada38x BUG=chrome-os-partner:47462 TEST=None BRANCH=tot Change-Id: I76f631ee6cdfc90c44727cb20aa960796bc785a5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e91cc19468325f005c6ac920bbe27a174c409727 Original-Change-Id: Iac5fc34df1ba18b4515029aa2fcff8f78a5df191 Original-Signed-off-by: Ruilin Hao <rlhao@marvell.com> Original-Reviewed-on: https://chromium-review.googlesource.com/313179 Original-Commit-Ready: Kan Yan <kyan@google.com> Original-Tested-by: Kan Yan <kyan@google.com> Original-Reviewed-by: Kan Yan <kyan@google.com> Reviewed-on: https://review.coreboot.org/13110 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04northbridge/intel/peg: Disable unused portsPatrick Rudolph
Walk the bus and try to find enabled devices. Disable the PEG port if no devices are attached. Change-Id: I67fcc831fd78ecc6dba83f4e0662ec7549cc2591 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/12894 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-04nb/intel/sandybridge/raminit: Fix two dimms per channelPatrick Rudolph
Issue observed: The system boots with 4G in channel 0 and 4G in channel 1. The system doesn't boot with any combination of 4G + 1G in channel 0 and 4G in channel 1. In both cases DIMM1 failed, while DIMM0 showed no issues. Problem description: The CLK to CMD/CTL was off by a half clock cycle. The find the issue I X-Y plotted timC vs timB for every lane on the failing rank. You can see an offset by 32 units for timB, that is not present on other ranks. It turns out that the XOVER CMD/XOVER CTL enable bit for DIMM1 was missing in program_timings(), which caused the clock offset. Problem solution: Add two functions to calculate XOVER CMD and XOVER CTL and use both to set XOVER in program_timings() and dram_xover(). Final testing result: The system boots with 4G + 1G in channel 0 and 4G in channel 1. Test system: * Intel IvyBridge * Gigabyte GA-B75M-D3H Change-Id: I88694c86054ade77e9d8bb2f1fdaf7bc559c1218 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13415 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-04crossgcc: Add checksum for makeStefan Reinauer
I forgot to add that when I added support to buildgcc. Change-Id: I586d64805e72f9512057a4e0698bdee19cc53146 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13568 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-04crossgcc: Rename x86 to x64Stefan Reinauer
Idee4eb5d112e3f6bffced0681e9112101bed6763 has renamed the architecture by accident. Rename it back. Change-Id: I5509d2aa09df513789325bc24d9b696a09cb898f Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13567 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-03lib: Support UNCOMPRESSED_RAMSTAGELee Leahy
Selecting UNCOMPRESSED_RAMSTAGE prevents lzma.c from being compiled for romstage. Adjust the logic in rmodule.c to prevent calls to the ulzma routine when UNCOMPRESSED_RAMSTAGE is selected. TEST=Build and run on Galileo Change-Id: I7409e082baab3c2a086c57ad5aa9844ba788c7cd Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13591 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-03chromeos: Sign FW_MAIN_A and FW_MAIN_BPatrick Georgi
This requires payload integration somewhere to be useful, because without that, adding it will (hopefully) break the signature. Change-Id: I67b8267e5040e26353df02d258e92a0610e19a52 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13560 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-03crossgcc: Bring back the old iasl building schemePatrick Georgi
This makes the cross{gcc,tools}-* targets build iasl again, without building it many times for cross{gcc,tools} Change-Id: I7546c2af5f7cce3a4f1a08f593fb5cbc675d69ad Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13564 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-03chromeos: Add Kconfig options for GBB flagsPatrick Georgi
Use the flags to preset the GBB flags field. The Kconfig defaults are chosen for a "developer" configuration. Change-Id: Ifcc05aab10b92a2fc201b663df5ea47f92439a3f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13559 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-03chromeos: Create GBB at build timePatrick Georgi
The GBB contains hardware-specific data plus some configuration. The latter isn't supported by this change yet and will come later. The fields that are supported (hardware ID, bmpfv, vboot keys) are configurable through Kconfig and point to Chrome OS-style default (eg. developer keys). While adding vboot keys, the two keys used to sign RW regions are also added to Kconfig, even if not yet used. Change-Id: Icfba6061ca83182df560cd36052fbb257826d4b0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13558 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-03build system: Add another post-processing stepPatrick Georgi
files_added is for rules that need to run after all CBFS processing is finished, such as SoC-specific postprocessing of the image, or for vboot, to sign the RW regions (that contain CBFS that shouldn't change afterwards.) Change-Id: I830aa0c93429f4971cd68e4358faba5c206c0038 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13557 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-03build_system: Extend site-localMartin Roth
- Add a target at the end of the build that can be used to run additional scripts or additional targets after coreboot.rom is built. - Source a site-local Kconfig file to allow site-specific configuration. This eliminates the need to add a hook for a script at the end of the build because you can add one yourself in site-local. Example site-local/Makefile.inc: build_complete:: ifeq ($(CONFIG_SITE_LOCAL),y) echo "Running additional steps in site-local" # run some script here to make my build unreproducible. endif .phony: build_complete Example site-local/Kconfig: menu "site-local" config SITE_LOCAL bool "site-local enabled" help Enable my site-local configuration to do stuff. endmenu Change-Id: Id4d1e727c69b5cdb05e7d52731bbb1d1e201864a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13413 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-02-03vendorcode/amd/agesa/f1{4,2,0} Sync Include directoryEdward O'Callaghan
Sync and merge useless differences. Change-Id: I4eea66c35af66d473dd56db9ccf105c878266f22 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: https://review.coreboot.org/7513 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-03vendorcode/amd/agesa/f15?tn: Strip false/redudant AMD ver tagEdward O'Callaghan
Strip out the AMD internal version tag, e.g. * @e \$Revision: 63425 $ @e \$Date: 2011-12-22 11:24:10 -0600 (Thu, 22 Dec 2011) $ which are false/inconsistent and serve no real meaning or purpose now. Change-Id: I4cca0899eba66a1c361ba784c5ac0222b0ee1aa6 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: https://review.coreboot.org/7516 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-03util/kconfig:xconf(QT): Update QT version of xconfzbao
Update the qconf.cc and qconf.h to upstream code, which added support of QT5 and removed the support of QT3. All code is ported from kernel.org, with only one line added to qconf.cc. int kconfig_warnings = 0; Change-Id: Ice77cddcc00e43375039379978e55f42acf867f7 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/13130 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-03include/device: Move inline functions from pci_def.h to pci.hAlexandru Gagniuc
pci_def.h is supposed to only contain definitions, such that it may be included in assembly files. Declaration of functions in said file prevents that. Change-Id: I0f90a74291c8a2ef7a1e1027d2d2182f896050fb Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: https://review.coreboot.org/13300 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-03xcompile: Add a way to specify -march=i586Martin Roth
Instead of instructing users to edit xcompile when they want to build a quark platform, give the build a way to set -march=586 so that the quark code will build correctly. The Quark processor does not support the instructions introduced with the Pentium 6 architecture. Change-Id: I0ed69aadc515f86f76800180e0e33bcd75feac5a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13552 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
2016-02-03crossgcc: Also add the nds32le architecture to the coreboot MakefilePatrick Georgi
Change-Id: Ibf3346586d188dbd5b7ab10bedfc1609b2bb1499 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13565 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-03crossgcc/Makefile.inc: deduplicate cross*-$arch rulesPatrick Georgi
Change-Id: Idee4eb5d112e3f6bffced0681e9112101bed6763 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13524 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-03buildgcc: Move all toolchain build targets to util/crossgccStefan Reinauer
There is a lot of potential to completely get rid of Makefile and keep everything in Makefile.inc, but for now this declutters the main Makefile.inc. Change-Id: I653313c74207f955514c036c81efcbfd988827c9 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13518 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-03buildgcc: Reorganize when IASL is builtStefan Reinauer
Instead of passing a variable around and painstakingly making sure that one target builds with it, and the others without, make IASL a dependency of the "catch all" targets. This also drops iasl as dependency from individual architecture targets, but things are more orthogonal that way. Note: instead of `make crossgcc-i386`, use `make crossgcc-i386 iasl` Change-Id: I8cd2e89acdd0f795836571470bad28fbf8797f58 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13563 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-03buildgcc: add nds32le compilerStefan Reinauer
Some Chrome ECs are based on that architecture Change-Id: Ib5d0c2f6f518fafc1ceb02c5f71c0935d16c66bb Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13562 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-03buildgcc: Rename ARM target from armv7a to armStefan Reinauer
The ARM target can compile for much more than just v7a. Change-Id: Ia4f67abcffdfe9c56c5d1848c75dfea83755e755 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13517 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-02soc/intel/common: Use SoC specific routine to read/write MTRRsLee Leahy
The registers associated with the MTRRs for Quark are referenced through a port on the host bridge. Support the standard configurations by providing a weak routines which just do a rdmsr/wrmsr. Testing: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select DISPLAY_MTRRS" * Add "select HAVE_FSP_PDAT_FILE" * Add "select HAVE_FSP_RAW_BIN" * Add "select HAVE_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if: * The MTRRs are displayed and * The message "FspTempRamExit returned successfully" is displayed TEST=Build and run on Galileo Change-Id: If2fea66d4b054be4555f5f172ea5945620648325 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13529 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-02Documenation: x86 Quark/Galileo remove i586 warningLee Leahy
Leverage patch 13552 by adding USE_MARCH_586 to soc/intel/quark/Kconfig. TEST=None Change-Id: Ifac947db53e967b98b9494db3f6c3f8ee039ac73 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13561 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-02-02Documentation: Add x86 documentation for required filesLee Leahy
Document the required files to perform a minimal coreboot/FSP build for x86. TEST=None Change-Id: I65b2947114634fce982ce82fb7c577fd5f47ed10 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13438 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-02src: Fix various spelling and whitespace issues.Martin Roth
This fixes some spelling and whitespace issues that I came across while working on various things in the tree. There are no functional changes. Change-Id: I33bc77282f2f94a1fc5f1bc713e44f72db20c1ab Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13016 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-02build system: add Chrome OS futility to toolsPatrick Georgi
Change-Id: I08925d110c6faa9e37107d63bfa75d0ab677d379 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13545 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-02-02build system: avoid setting HOSTCC to " gcc"Patrick Georgi
Change-Id: I650b3a347edc2d575c5cbee2051f8ed7b4bd1645 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13544 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-02-02commonlib: move uefi includes out of commonlib includesStefan Reinauer
... and move them into the code using them, instead. Change-Id: I2391234797ad00da8038dda198eadf0b0fcaedb2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13526 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-02asus/f2a85-m: Configure Hudson to be legacy-freeLoic
Change-Id: I67271f2a209fc96eea6181f8875a5e69cf98d8c4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13511 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-02amd/agesa/family15tn: Add Richland CPU IDLoic
Add the AMD A8-660K APU. Change-Id: I210a8ba962529c26a535965689672a46b09e325f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13510 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-02arch/x86: Add second paragraph to license headerMartin Roth
Change-Id: Ic1da46d2abc8d20987048e4ef1e7a776d0c685d6 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13555 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-02-02Makefile: Add a comment to fix syntax highlightingMartin Roth
Trivial fix for syntax highlighting in editors. Some get confused by the double quote that doesn't have a close quote and stop highlighting at that point. This comment closes the quote and the paren pair so that they can recover. Change-Id: I566e8e0f4412009f679ab079f20ae30c2049b502 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13435 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-02lint: Check license headers for both paragraphs of the GPLMartin Roth
If the GPLv2 or GPLv2+ license header is being used on a coreboot file, make sure it has two paragraphs as specified by the Common License Header section in the developer guidelines in the coreboot wiki. Change-Id: Ifffa0fa7272f5a4b129d4b7b8a515f8795bc2401 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13119 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-02payloads/coreinfo: Add defaultbuild targetMartin Roth
Add a single target to do the full coreinfo build using default Kconfig values for both coreinfo and libpayload. Change-Id: Id622fb2df480e826f6d868dbe01385d76587be26 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13426 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-02Kconfig: indent with tabs, not spaces.Martin Roth
Change-Id: I8996f8ab739a07014a4189738b5624485d752d9d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13540 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-02src/: Fix Kcofig symbols missing CONFIG_ prefixMartin Roth
- Add CONFIG_ prefix to two symbols. - Remove the use of the third symbol as it will never be matched. Change-Id: Ifa7f6884001cb05fb8397f193c4b08a0161f498c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13539 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-02lib/gcov-glue.c: Remove trailing number from COVERAGE_MAGIC macroJean Lucas
The COVERAGE_MAGIC macro has a trailing `4' on it, which makes it a 64-bit large integer, as opposed to a 32-bit unsigned integer, as originally designated in `util/cbmem/cbmem.c'. Remove this number so building with CODE_COVERAGE will succeed. Change-Id: Ib5d7f2704a4c092c3eca6f62e219edb30950d793 Signed-off-by: Jean Lucas <jean@4ray.co> Reviewed-on: https://review.coreboot.org/13520 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01cpu/amd/fam10h-15h: Add workaround for AMD Erratum 600Timothy Pearson
Change-Id: Ie175b5b490f77cc380536ebd737da8618d4b448b Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13170 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-02-01mainboard/asus/kgpe-d16: Wait for all APs to stop before MCT setupTimothy Pearson
Under certain conditions when the APs are still executing during MCT setup the system can hang. This was the root cause of most of the S3 resume failures on this platform; waiting for AP stop before MCT setup allows for reliable S3 resume. Change-Id: I329eea9a8912d7b57efe6aae327d24fd6c3fd782 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13169 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01cpu/amd/fam10h-fam15h: Add new wait_ap_stopped functionTimothy Pearson
Under certain conditions, such as when microcode updates are being performed, it is important to make sure all APs have finished updates and are halted before continuing with the boot process. Add a new wait_ap_stopped() function to allow for this functionality to be added to the appropriate mainboard romstage source files. Change-Id: Ib455c937888a58b283bd3f8fda1b486eea41b0a7 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13168 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01nb/amd/amdmct/mct_ddr3: Save and restore SkewMemClk for S3 resumeTimothy Pearson
Change-Id: Ib331bd330530d4d6be5eb7351d9f9b15c135dd63 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13167 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01mainboard/asus/kgpe-d16: Use W83667HG-A specific PS/2 ASL fileTimothy Pearson
Change-Id: I5a4e223b2e247decd30d8fb2a083be4cff6500a4 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13166 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01mainboard/asus/kgpe-d16: Update DSDT with new devices and bump versionTimothy Pearson
Change-Id: I15fedb067f1911799f7528b60b8754f2984b38ec Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13161 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-02-01drivers/pc80: Add PS/2 mouse presence detectTimothy Pearson
On certain Winbond SuperIO devices, when a PS/2 mouse is not present on the auxiliary channel both channels will cease to function if the auxiliary channel is probed while the primary channel is active. Therefore, knowledge of mouse presence must be gathered by coreboot during early boot, and used to enable or disable the auxiliary PS/2 port before control is passed to the operating system. Add auxiliary channel PS/2 device presence detect, and update the Winbond W83667HG-A driver to flag the auxiliary channel as disabled if no device was detected. Change-Id: I76274493dacc9016ac6d0dff8548d1dc931c6266 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13165 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01mainboard/asus/kgpe-d16: Add support for lifted BSP APIC IDsTimothy Pearson
Change-Id: Ic4b68a032068208d56b2a04150f7fc7d61b38eba Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13164 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01mainboard/asus/kgpe-d16: Add missing IRQ route to mptableTimothy Pearson
The IOMMU/HT device was not routed correctly; add the proper APIC mappting to the mptable generation code. Also clarify comments surrounding the pin mappings. Change-Id: I72ceb0f22dabdfa71a1f6231ccb841face08ff7a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13163 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01mainboard/asus/kgpe-d16: Clean up legacy PIRQ table codeTimothy Pearson
Change-Id: Ib4f46944f076f1e696cf16a1e532eb8635b603c9 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13162 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01southbridge/amd/sb700: Enable extended APIC ID when Kconfig option setTimothy Pearson
Change-Id: I52fc2c2294edead3b5dacf397c0a1ab2e08b1e3f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13160 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01southbridge/amd/sb700: Set HPET min tick value to RPR recommendationTimothy Pearson
Change-Id: I766eca6369b60a79a6823bc744934e3f1fbc17b2 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13159 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01cpu/amd/fam10h-15h: Fix Family 15h boot hang when BSP lift enabledTimothy Pearson
The existing code did not allow for the second core of the BSP to reside on an APIC ID other than 1, leading to a boot hang on Family 15h processors when APIC_ID_OFFSET was set to anything other than 0. Furthermore, insufficient AP stack space was allocated for AP start. Change-Id: I4ded3cfb3736149e2265848014352d7622d5042a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13158 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-01mainboard/asus/kgpe-d16: Use W83667HG-A SuperIO instead of NCT5572DTimothy Pearson
Change-Id: If67999098fbe2831eeb30cb8b362c558db5d2688 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13157 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-02-01util/release: extend release scriptPatrick Georgi
Add the ability to release a given commit id, and normalize the tarballs to use coreboot/1000 for owner and group, and the last commit date as mtime for all files. Change-Id: Ia349f429090fe9804f7f14c226812646e2f712be Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13514 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-31buildgcc: Add GNU make to reference toolchainStefan Reinauer
Change-Id: I8a41065880c3fd1f95ee8877031bf1738aaae859 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13519 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-31buildgcc: Update LLVM to 3.7.1Stefan Reinauer
Not much testing, update mostly so we can test with the latest scan-build. Change-Id: I50d28b7e0dfd31f9ae565c8515d5ab1760ca4c62 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13516 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-31buildgcc: Rename armv7-a-eabi compiler to arm-eabiStefan Reinauer
The compiler really supports a whole line of ARM CPUs, not just ARMv7a: arm-eabi-gcc: note: valid arguments to '-march=' are: armv2 armv2a armv3 armv3m armv4 armv4t armv5 armv5e armv5t armv5te armv6 armv6-m armv6j armv6k armv6s-m armv6t2 armv6z armv6zk armv7 armv7-a armv7-m armv7-r armv7e-m armv7ve armv8-a armv8-a+crc iwmmxt iwmmxt2 native So let's reflect this in the cross compiler name. Change-Id: I717760d80954655b2de9ae019b813d81e9a75762 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13515 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-31vendorcode/intel: remove unused apple specific assembler macrosStefan Reinauer
Since this code is pulled in through commonlib, it will break compilation of cbfstool on OSX. Change-Id: I342bfa7e755aa540c4563bb5cd8cccacee39d188 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13525 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-31drivers/intel/fsp1_1: Fix spelling error in API and copyrightLee Leahy
Change granluarity to granularity. Change wacbmem_entryanty to warranty. Update copyright dates. TEST=None Change-Id: Ib7775cb33616751760919a5850777dc6f77a6be9 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13528 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-31h8/battery: Fix ASL warning.Vladimir Serbinenko
Change-Id: Idf74e400efa3fea8eb74f372e4f261ab6567db8a Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13513 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-01-31stout: Fix VGA PCIIDs.Vladimir Serbinenko
Change-Id: I7dcde170d0f59ea9886342c0d2c09b70b9d0d84d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13537 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-01-30kconfig_lint: Add readme documentMartin Roth
The readme describes the operation and usage of kconfig_lint. It also lists all the notes, warnings, and errors that kconfig_lint looks for. Change-Id: I873f394ff93fce42cd9638cbbad6134f1aef3a6a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13464 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-30kconfig_lint: add comments and whitespace fixes.Martin Roth
No functional changes. Change-Id: I40284b68ddda7e19741c5306a8c74761c00e4b35 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13463 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-30kconfig_lint: Skip temp files when looking for unused Kconfig files.Martin Roth
Don't warn on Kconfig.orig and Kconfig~ files when trying to verify that all the Kconfig files in the coreboot source tree are being loaded. Change-Id: Ie7babe60b29735e5ccc5f93f4e42ad82dfb47044 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13462 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-30kconfig_lint: Update prompt structureMartin Roth
- The prompts were not getting incremented, so each prompt for a symbol would overwrite the previous. - Record the menu each prompt is in. Change-Id: Ia282a30344d5e135f4f2027be9aff0e49a4e5edb Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13461 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>