summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-10sc7180: Add display hardware pipe line initializationVinod Polimera
Add sc7180 display hardware pipeline programming support and invoke the display initialization from soc_init. Changes in V1: - added display init required check. - added edid read function using i2c communication. - added sn65dsi86 bridge driver to init bridge. - moved display initialization to mainboard file. Changes in V2: - moved diplay init sequence to mainboard file - moved edid read function to bridge driver. - calculated timing paramters using edid parameters. - removed command mode config code. - moved bridge driver to drivers/ti. - seperated out bridge and soc code with mainboard file as interface. Changes in V3: - add GPIO selection at runtime based on boardid. - add vbif register struct overlay. Changes in V4: - update gpio config for lazor board. Change-Id: I7d5e3f1781c48759553243abeb3d694f76cd008e Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39615 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-10sc7180: Add support for sn65dsi86 bridgeVinod Polimera
Add sn65dsi86 bridge driver to enable the eDP bridge. Datasheet used : https://www.ti.com/lit/ds/sllseh2b/sllseh2b.pdf Changes in V1: - fix the dp lanes using mask - separate out the refclk and hpd config to init function Change-Id: I36a68f3241f0ba316c261a73c2f6d30fe6c3ccdc Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-10sc7180: Add display dsi interface programmingVinod Polimera
This change adds support for sc7180 dsi interface host programming. Changes in V1: - remove dual dsi config code. - update register access using struct overlays. - remove dsc config & command mode code. Changes in V2: - remove dsi read and write functions. - remove target and panel related code. Changes in V3: - move prototypes to headers. - define macros for constants. Changes in V4: - define register bits instead of hardcoded values. Change-Id: Ie64354ce8bc2a64b891fb9478fbca38d6ec4c321 Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39614 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-10sc7180: enable bl31T Michael Turney
Developer/Reviewer, be aware of this patch from Napali: https://review.coreboot.org/c/coreboot/+/28014/44 Change-Id: Ia961ee0e30478e21fd786ce464655977449df510 Signed-off-by: Ashwin Kumar <ashk@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35504 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-09soc/intel/common/block/imc: Drop unused codeAngel Pons
Nothing uses this code anymore. Change-Id: I5da1020597c126a40b015beb6e43fb0168aa330f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45046 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
2020-09-09sc7180: Add display 10nm phy & pll programming supportVinod Polimera
Adds basic headers as well as source required for display dsi 10nm phy & pll programming. Changes in V1: - add struct overlays to model hardware registers. - remove typedef structures. - remove dead code such as dual dsi,split config etc. Changes in V2: - remove panel related header files. - update the bitclock calculation using edid parameters. - add phy timing calculation function. - update copyright license. Changes in V3: - update the mdss clock structure. - remove dsi_phy_configinfo_type struct. - remove unused struct fields. Changes in V4: - update clock apis. - remove unused structures. Change-Id: I8ff400922ae594f558cf73a5aaa433a3a93347c2 Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-09sc7180: clock: Add display external clock in corebootTaniya Das
Add support for display external clock in coreboot for SC7180. Tested: Display clocks are configured. Change-Id: Ida222890252b80db738fa1f685b212b3f7c6e689 Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-09trogdor: Change Memlayout to increase QcLib region from 512 to 596kBAshwin Kumar
Change-Id: I49008ea9bc6254c745352b2e8ee965ddc2e8e5e4 Signed-off-by: Ashwin Kumar <ashk@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-09sc7180: GPIO: Add I2S configuration for google/trogdorvsujithk
Configure GPIO pins as I2S mode for audio speaker. The audio speaker does not work on Trogdor revision 1, as the layout was changed. Developer/Reviewer reference, be aware of this issue: https://partnerissuetracker.corp.google.com/issues/146533652 Change-Id: Ia4bbfea591a3231640b53e64f0e4e9d43c4437a3 Signed-off-by: vsujithk <vsujithk@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-09trogdor: SoC makefile blob supportashk
Following blobs will includes with SoC makefile: * AOP * BOOT * QTISECLIB * QCSEC * QUPV3FW Change-Id: I85a20ef31ec91c6f22221d16fd4c3097c5cb97d1 Signed-off-by: Ashwin Kumar <ashk@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-09mb/google/volteer/var/trondo: Add memory parts and generate DRAM IDsDavid Wu
Add memory parts and generate DRAM IDs for trondo. BUG=None TEST=FW_NAME=trondo emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I2e89ecaf73a30595ed48ac9ce94ccbd4bb7ed3c2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45164 Reviewed-by: Michael Niewöhner Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-09drivers/ipmi: Add CONFIG_IPMI_KCS_TIMEOUT_MS for IPMI KCS timeout valueJohnny Lin
With the current timeout of 1000 cycles of 100 microsecond would see timeout occurs on OCP Delta Lake if the log level is set to values smaller than 8. Because the prink(BIOS_SPEW, ..) in ipmi_kcs_status() creates delay and avoid the problem, but after setting the log level to 4 we see some timeout occurs. The unit is millisecond and the default value is set to 5000 according to IPMI spec v2.0 rev 1.1 Sec. 9.15, a five-second timeout or greater is recommended. Tested=On OCP Delta Lake, with log level 4 cannot observe timeout occurs. Change-Id: I42ede1d9200bb5d0dbb455d2ff66e2816f10e86b Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45103 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-09mb/google/volteer/variants/eldrid: add memory.c for ddr4 supportnick_xr_chen
Add new memory.c to support DDR4 memory types. Use the new meminit_ddr() and variant_memory_sku() for eldrid variant code on memory.c The initial settings override the baseboard from volteer and fine tune gpio.c and overridetree.cb on eldrid's configuration. BUG=b:161772961 TEST='emerge-volteer coreboot chromeos-bootimage' and verify that Eldrid can boots. NOTE that tests the ddr4 side of the implementation. Change-Id: I2c7b30093a8d85bac5aba5b83768af5eb36c4f70 Signed-off-by: Nick Chen <nick_xr_chen@wistron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44632 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-09-093rdparty: Add submodule intel-sec-toolsPhilipp Deppenwiese
Project: https://github.com/9elements/converged-security-suite License: BSD-3 Tooling for Intel platform security features Change-Id: I7421b30eb38e64cf6b77b7e1c485c5700728997b Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45170 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-09soc/ti/am335x: Fix MLO buildSam Lewis
Allows the AM335X to boot from the coreboot generated MLO by: - Fixing the load address in the MLO header to be the start of SRAM - Fixing the way that the bootblock size is calculated (which is embedded into the MLO so that the MLO knows how much to load into SRAM). The previous method relied on parsing cbfstool output - the output has changed format since this was originally written so this no longer works. Directly using the filesize of the built binary is probably a more stable way of doing this. As part of this, the start addresses of SRAM and DRAM were fixed to be consistent with the AM335x Technical Reference Manual (spruh73, rev Q). TEST: Booted Beaglebone Black from MLO placed at offset 0x00 on an SD card Change-Id: I514d7cda65ddcbf27e78286dc6857c9e81ce6f9e Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44381 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-09mb/ti/beaglebone: Init UART in early initSam Lewis
The console is initialized before mainboard_init, so the peripheral should be initialized in bootblock_mainboard_early_init rather than bootblock_mainboard_init. Change-Id: I9f4ba29798eb0b1efea76f5ade4a234fb35a2f83 Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-09-09soc/intel/common/block/uart/Kconfig: Drop unused symbolsAngel Pons
They are not referenced anywhere. Change-Id: Iff2d3b0063da5796e0bff1ada08b0a544c3f9a5a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-09-09util/mb/google: Update dalboz/trembyle templateRob Barnes
- Fix relative path to spd folder. - Add spd folder with empty files. BUG=None TEST=None Change-Id: Iae88ff9c8255f60544312f0eeadf1ce617437baf Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-09-09util/spd_tools: Support comments in mem_parts_usedRob Barnes
Allow comments prefixed with '#' in mem_parts_used csv file. BUG=None TEST=Run gen_part_id with mem_parts_used file containing comments Change-Id: Ia9e274d45aa06dea7a3a5f8cd1c8ee2b23398876 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-09soc/intel/xeon_sp: Select CPU_INTEL_COMMONAngel Pons
This is an intermediate step to have SOC_INTEL_COMMON_BLOCK_CPU select CPU_INTEL_COMMON directly, to avoid dependency problems. Tested with BUILD_TIMELESS=1: Without including the config file in the coreboot.rom, both OCP Tioga Pass and Delta Lake remain identical. Change-Id: I565e75869be730e7c2fe7114b829941bc9890e6c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45041 Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-09drivers/aspeed/common: Support disabled P2A bridgePatrick Rudolph
This ports Linux commit 71f677a91046599ece96ebab21df956ce909c456 "Handle configuration without P2A bridge". Quote: The ast driver configures a window to enable access into BMC memory space in order to read some configuration registers. If this window is disabled, which it can be from the BMC side, the ast driver can't function. Closing this window is a necessity for security if a machine's host side and BMC side are controlled by different parties; i.e. a cloud provider offering machines "bare metal". P2A stands for primary to AHB. Tested on Prodrive Hermes, which uses an AST2500. The machine still boots, has a high resolution framebuffer working in EDK2, and its boot time has been reduced by 2.5 seconds as it no longer runs into a timeout due to disabled P2A bridge. Change-Id: I3293dc35ae89c010154e02eff904ec3a68c96683 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45137 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-09-09soc/intel/cannonlake: Add PCIe ports on PCH-HPatrick Rudolph
Fixes complains about missing INT configuration by the pciexp kernel modules. Tested with Linux 5.5 on Prodrive Hermes. Change-Id: I277f592cd8d2c86a9c7ba4b34d3f703f7d593582 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-09apollolake: Define MAX_CPUS at SoC scopeAngel Pons
The three Intel Apollo Lake boards (apl_rvp, leafhill and minnow3) do not define MAX_CPUS, which would then default to 1. Since this is most likely an oversight, use the same value as other Apollo Lake boards. To ensure this does not happen again, factor out MAX_CPUS to SoC scope. Change-Id: I5ed98a6b592c8010b59eca7ff773ae1ccc4cd7b1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45144 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-09apollolake: Limit MAX_CPUS to 4Angel Pons
APL does not support Hyper-Threading, and has at most four CPU cores. Change-Id: Ib2ffadc0c31cdd96bec8eed5364c984acb2e1250 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45143 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-09geminilake: Factor out MAX_CPUS valueAngel Pons
Both Gemini Lake boards in the tree use the same value. Change-Id: Ib6bd05206026736fd7e3d44b49e4d8ba217c2708 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45142 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-09soc/intel/apollolake: Rename `SOC_INTEL_GLK` symbolAngel Pons
For consistency with other platforms, use `SOC_INTEL_GEMINILAKE`. Change-Id: I06310e5a9bca6c9504f19a6c2fe9b26626f290d4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45141 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-09vendorcode/intel/fsp/fsp2_0/adl: Add FSP header file version 1332Subrata Banik
List of changes: 1. Select FSP_HEADER_PATH 2. Select FSP_FD_PATH 3. Select PLATFORM_USES_FSP2_2 4. Select UDK_202005_BINDING Change-Id: Ic5b09bad3c23b84c6ff6b1ea9e1dc684d7463c27 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45148 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-09-09mb/google/puff: Increase DPTF parameters for faffyDavid Wu
Update critical and passive policy for TSR0. BUG=b:167477885 BRANCH=puff TEST=build and verify by thermal team Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I244e1b5cacabf5b73c47b4039ae150cd17fcd0fc Reviewed-on: https://review.coreboot.org/c/coreboot/+/45169 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-093rdparty/qc_blobs: Uprev to new HEAD (6b7fe498eb)Julius Werner
Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I2de0c13000e5b1e32e9c1a6de3daa09acf6c321b Reviewed-on: https://review.coreboot.org/c/coreboot/+/45057 Reviewed-by: Philip Chen <philipchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-08src/mb/google/hatch: remove "sushi" variant.Paul Fagerburg
Sushi is not a real product, just a test of the new_variant program. The effort to keep it up-to-date with the rest of Hatch is no longer worth it. Remove the variant. BUG=b:168030592 TEST=build bot is successful, hatch-cq builds successfully Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Change-Id: I2b0036f3cbdea4bfaed1274ab87a20d24c75de57 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-08mb/google/dedede: Fix the SPD pathKarthikeyan Ramasubramanian
CB:44774 introduced the non-existent SPD path. This is preventing the device from booting up. BUG=b:168053219 TEST=Build and boot drawcia board to OS. Change-Id: I70ca5f4cf2c8e2e88ea5b1514b656caafb732743 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45182 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-08pci_ids: Add Alder Lake DTT PCI IDsSubrata Banik
Add PCI IDs for Intel's Dynamic Tuning Technology (DTT) for ADL. Also add NULL terminator at end of pci_device_ids. Change-Id: If25b1f562567a833683b0b8796bd1d6cac0bd490 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45140 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-08pci_ids: Add Alder Lake IPU PCI IDsSubrata Banik
Add PCI IDs for Intel's Image Processing Unit (IPU) for ADL. Also add NULL terminator at end of pci_device_ids. Change-Id: I327828d676422fc6162fadffd9b39529ecb89ace Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45139 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-08lib/Kconfig: Drop obsolete help text from GENERIC_SPD_BINMichael Niewöhner
SMBus code is linked unconditionally since commit 0e3c59e. This change drops that obsolete part from the help text. Change-Id: I603ab012760684021be1b5eca5d0ddff69463b79 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45145 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-08util/spd_tools: output binaries instead of hexdumpsMichael Niewöhner
Instead of generating hexdumps, output binary SPD files since we plan to convert all hex SPD files to binary. Also adjust the file extension where needed. Test: compared generated binaries with converted binaries from hex files Change-Id: Ie99d108ca90758d09dbefad20fe6c9f7fc263ef1 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-08util/apcb_edit: fix handling of binary SPD filesMichael Niewöhner
Passing binary SPD files to apcb_edit can lead to an encoding error, since the files were read in text mode. To fix this, read SPD files always in binary mode and only decode them, when `--hex` is set. Tested by comparing output files from the same SPDs in both, binary and hex mode. Change-Id: I6b75a9e1234e71667bdc8cb4eb10daf8c0ac3c17 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-08mb/ocp/deltalake: Add SMBIOS OEM string for SPD register vendor IDJohnny Lin
Tested=On OCP Delta Lake, with FSP WW36 dmidecode -t 11 can see the SPD register vendor ID String 7: b300 0000 b300 0000 b300 0000 b300 0000 b300 0000 b300 0000 Change-Id: I15ab9b4c709eb97a03d6e08fe0bcdcb7f8607db0 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-08vc/intel/fsp/fsp2_0/cpx_sp: Add DIMM definition in SystemMemoryMapHobJohnny Lin
Most of them are needed for SMBIOS type 17 creation. Tested=With FSP WW36 verified the printed hob values match with FSP hob data. Change-Id: I02f4600f1be39e2576d7c84a5a6b6672ebb7034b Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44847 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-08soc/mediatek/mt8192: Add SPI flash controller dual read functionCK Hu
Support SPI flash dual read funciton which change spi mode (1-1-1) to dual mode (1-1-2). Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: Iabd3668fc4bc42137b7743144fc1cced4fe72737 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44852 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-08util/ifdtool: Add NULL check for pointer fpsbaSubrata Banik
This patch adds NULL check inside get_ifd_version_from_fcba() function to fix Klocwork issue. BUG=b:153888802 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I525054376b36c658b93760b185ef6dd170f5aea9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45130 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-09-08vendorcode/intel/FSP2_0/CPX-SP: update to ww36Jonathan Zhang
Intel CPX-SP FSP ww36 release has following changes: * Update FSP header version to change among FSP releases. * Add SPDRegVen field in memory map HOB, to facilitate SMBIOS type 11 (OEM strings) generation. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I7a8dab3987c2f8f471b40f7b3b9ced0c2909271d Reviewed-on: https://review.coreboot.org/c/coreboot/+/45100 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-08mb/system76/lemp9: update HDA pin configJeremy Soller
To minimize the quirks the kernel has to apply, the headset mic is set to its correct value in coreboot. Tested on lemp9, audio is functional. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: I6b59de95f01360a5f7779f87f39edeb75dedc215 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43631 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-08soc/intel/baytrail: Add missing GSM size definitionsAngel Pons
Change-Id: I456591f63f463c5cec1cbf3c1633bdb61be92d29 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44935 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-08soc/intel/denverton_ns/Kconfig: Drop unused 'IQAT_MEMORY_REGION_SIZE'Elyes HAOUAS
Change-Id: I25cfc61b7a25b68dd22573a88933e03931a755ef Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45069 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Guckian <d.guckian20@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-08mb/asus/a88xm-e/Kconfig: Correct 'HUDSON_XHCI_ENABLE' symbolElyes HAOUAS
Change-Id: Ibe8844db74b43009e7c49df78882ed76b0bbebae Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-08mb/opencellular/elgon/Kconfig: Drop unused 'MAINBOARD_FIT_DTS'Elyes HAOUAS
Change-Id: Ie084f93998dc16450bb3db99d7240905bed3d50e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-08vendorcode/intel/fsp/fsp2_0/cpx_sp: Set correct stack number for IOU3Johnny Lin
PSTACK2 (IOU3) should be stack number 4, mainboard uses stack number as the index to access the bus number array read by get_stack_busnos(). Without the fix it would get the wrong bus number (0xb1). Tested=On OCP Delta Lake, dmidecode -t 9 to verify slots bus number on IOU3 are correct (0xb2). Change-Id: I1c9e49bbc9a00de82d1fc67b3b4ed47e03eacdda Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45022 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-08mb/google/dedede/var/drawcia: Configure I2C high and low timeKarthikeyan Ramasubramanian
Configure the I2C bus high and low time for all enabled I2C buses. BUG=b:162232776 TEST=Measured the I2C bus frequency as 389 KHz, high time as 870 ns and low time as 1580 ns. Change-Id: I67d2725a7fc8d83e3fa8a56cfa86540c4e6f0971 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45084 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-08mb/google/dedede/var/waddledee: Configure I2C high and low timeKarthikeyan Ramasubramanian
Configure the I2C bus high and low time for all enabled I2C buses. BUG=b:163743035 TEST=Measured the I2C bus frequency as 384 KHz, high time as 924 ns and low time as 1680 ns. Change-Id: I60a5f6814fb9818c724f6b6fe465ea49d0de0f97 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45083 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-08soc/intel/tigerlake: Skip GPIO configuration from FSPSrinidhi N Kaushik
FSP v3333 or later, provides a new UPD to Skip configuring GPIO settings from FSP. coreboot should provide all the required GPIO configuration for the platform when this UPD is set. BUG=b:166790597, b:146390704 BRANCH=none TEST=build and boot volteer proto2 Cq-Depend:chromium-internal:3240396,chromium-internal:2870145 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: If32f35a188d510db8e4d8973cae78297d49a9240 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44913 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-08vendorcode/intel/fsp: Update Tiger Lake FSP Headers for FSP v3333Srinidhi N Kaushik
Update FSP headers for Tiger Lake platform generated based FSP version 3333. Previous version was 3313. Changes Include: 1. Update comments 2. Add new UPD for Gpio Override support BUG=b:166790597 BRANCH=none TEST=build and boot volteer proto2 Cq-Depend:chromium-internal:3240396,chromium-internal:2870145 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Ie3f0688143eef532946c7a2141909c1ac173fc2f Reviewed-on: https://review.coreboot.org/c/coreboot/+/44912 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-08soc/intel/elkhartlake: Update SA & PM related definitionsTan, Lean Sheng
1. Update SA base address & size 2. Update GBE control bit register value Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: I1f5036c9cd75682fcf239170bcb257ffaa002e7d Reviewed-on: https://review.coreboot.org/c/coreboot/+/45077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-09-08soc/intel/elkhartlake: Update PMC related register definitionsTan, Lean Sheng
Update ABase, PMC GPIO value sets and PMC register base address. Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: Iba43b791cab0665ddebfbed68b7e2d15406ad206 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-09-08soc/intel/elkhartlake: Add CPU, SA, PCH & IGD DIDs TableTan, Lean Sheng
1. Add CPU, SA, PCH & IGD DIDs table into report_platform.c 2. Add additional EHL SA DID in pci_ids.h Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: I5c98089873b17f82560eba13c7de3353b6d3e249 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-09-08soc/intel/elkhartlake/acpi: Copy acpi directory from jasperlakeTan, Lean Sheng
Clone entirely from Jasperlake List of changes on top off initial jasperlake clone 1. Rename from jasperlake to elkhartlake 2. Remove irelevant devices asls (ipu,ish,camera clock,gpio_op) Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: I5e77081d1673cc0ca97edc63e9996c045ab6e9b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44812 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-08soc/intel/elkhartlake: Do initial SoC commit till ramstageTan, Lean Sheng
Clone entirely from Jasperlake List of changes on top off initial jasperlake clone 1. Replace "Jasperlake" with "Elkhartlake" 2. Replace "jsl" with "ehl" 3. Replace "jsp" with "mcc" 4. Rename structure based on Jasperlake with Elkhartlake 5. Clean up upd override in fsp_params.c will be added later 6. Sort #include files alphabetically as per comment 7. Remove doc details from espi.c until it is ready 8. Remove pch_isclk & camera clocks related codes 9. Add new #define NMI_STS_CNT & NMI_EN as per comment Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: I372b0bb5912e013445ed8df7c58d0a9ee9a7cf35 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-09-08soc/intel/apollolake: Hook up ENABLE_VMXAngel Pons
Unlike other platforms, Apollo and Gemini Lake have VmxEnable on FSP-S. Note that this will enable VMX by default on both of these platforms. Change-Id: I6a4470e0e64b10f07edfcf270bb02c7cd6a8fa1a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45039 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-09-08soc/intel/apollolake: Select CPU_INTEL_COMMONAngel Pons
This is an intermediate step to have SOC_INTEL_COMMON_BLOCK_CPU select CPU_INTEL_COMMON directly, to avoid dependency problems. Tested with BUILD_TIMELESS=1, UP Squared does not change. Gemini Lake already selects this through SOC_INTEL_COMMON_BLOCK_SGX. Change-Id: If737fa6d8700f435c8692c80244f0e71657c2236 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45038 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-09-08nb/intel/ironlake: Use an enum for `gpu_panel_port_select`Angel Pons
The PRM does not describe the relevant bits, but Linux's i915 driver handles these bits the same way for both Ironlake and Sandy Bridge. Change-Id: Ice7412e335752bd7e297ad50f685effcefbd41d2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-08nb/intel/sandybridge: Use an enum for `gpu_panel_port_select`Angel Pons
All boards currently have backlight on either LVDS or eDP. Change-Id: I878bc7f1ff75a2b82b9556e855aff1d4d03e0268 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-08nb/intel/haswell: Drop `gpu_panel_port_select`Angel Pons
The corresponding bits in PP_ON_DELAYS are reserved MBZ. Change-Id: Icd2554c928a5908dfb354b81d3e6c5b5f242f1d1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45034 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-08soc/intel/broadwell: Drop `gpu_panel_port_select`Angel Pons
The corresponding bits in PP_ON_DELAYS are reserved MBZ. Change-Id: I9789a7d50c4bce2ccad0bf476f877db25e3ff82e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45033 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-08mb/google/volteer: config QS silicon devices for CSE LITEMark Hsieh
Configure eldrid to use CSE Lite. BUG=b:158140797 TEST=cd to volteer's asset_generation folder, execute "./gen_all_variant_images.sh" and verify that all variant images are produced. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I357abdac4102f358d3aa1cb50f600312039ef140 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-09-08soc/intel/tigerlake: Add SMRR Locking supportTim Wawrzynczak
The SMRR MSRs can be locked, so that a further write to them will cause a #GP. This patch adds that functionality, but since the MSR is a core-level register, it must only be done once per core; if the SoC has hyperthreading enabled, then attempting to write the SMRR Lock bit on the primary thread will cause a #GP when the secondary (sibling) thread attempts to also write to this MSR. BUG=b:164489598 TEST=Boot into OS, verify using `iotools rdmsr` that all threads have the Lock bit set. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I4ae7c7f703bdf090144637d071eb810617d9e309 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kane Chen <kane.chen@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-08soc/intel/common: Add SMRR Lock Supported bit definition for MTRR_CAPTim Wawrzynczak
The IA32_MTRR_CAP register has a bit which indicates that the SMRR MSRs can be "locked" and this patch adds the definition for that. BUG=b:164489598 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I1254fb40c790f2a83dd11c2aabcf9bdf922b9395 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-08cpu/x86: Add definition for SMRR_PHYS_MASK_LOCKTim Wawrzynczak
The IA32_SMRR_PHYS_MASK MSR contains a 'Lock' bit, which will cause the core to generate a #GP if the SMRR_BASE or SMRR_MASK registers are written to after the Lock bit is set; this is helpful with securing SMM. BUG=b:164489598 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I784d1d1abec0a0fe0ee267118d084ac594a51647 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-08mainboard/google/volteer: Disable S0i3.4 if cr50 firmware is too oldJes Klinke
For Volteer (and future Tiger Lake boards) we can enable mode S0i3.4 only if we know that the Cr50 is generating 100us interrupt pulses. We have to do so, because the SoC is not guaranteed to detect pulses shorter than 100us in S0i3.4 substate. A new Kconfig setting CR50_USE_LONG_INTERRUPT_PULSES controls new code running in verstage, which will program a new Cr50 register, provided that Cr50 firmware is new enough to support the register. This CL adds code to detect the case when Cr50 is unable to generate longer pulses, and in that case explicitly disable the S0i3.4 substate as well as setting gpio_pm_override to all zeroes. This will increase power usage slightly, but guarantee that the GPIO block in the SoC does not switch to a slower sampling clock. In practice, this case will only be encountered in the factory, before the Cr50 chip is updated to a new RW image. (Prior to this change, the gpio_pm_override was hardcoded to zero for Volteer, but the S0i3.4 substate was not disabled. According to my conversations with Intel engineers, that was not enough to guarantee detection pulses shorter than 100us. But it is entirely possible that we have just been "lucky" that the SoC has not gone into low power mode during the boot process, where most of the cr50 communication happens.) TEST=util/abuild/abuild -t GOOGLE_VOLTEER -c max -x BUG=b:154333137 Change-Id: Idef1fffd410a345678da4b3c8aea46ac74a01470 Signed-off-by: Jes Bodi Klinke <jbk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-08mb/intel/jasperlake_rvp: Add DTT support for jslrvpSumeet R Pawnikar
Add DTT (Dynamic Tuning Technology) support for Jasper Lake based rvp board. Set power limits and CPU sensor thresholds for DTT based thermal control. BRANCH=None BUG=Noe TEST=Build and boot on jslrvp board Change-Id: I41409c70d8472c54ca452fc98d5ee9edf3ccd307 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44942 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-08soc/mediatek/mt8192: Add SPI flash controller DMA read functionCK Hu
To speed up SPI flash read, enable DMA read function. Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: Ic1679ef7940258350feeadac50ad8ea407fd7b90 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-09-08mb/google/kukui: Add LPDDR4X Samsung K4UBE3D4AA-MGCR 4GB supportKevin Chiu
Support 4GB Samsung K4UBE3D4AA-MGCR discrete DDR bootup. BUG=b:162379736 BRANCH=kukui TEST=emerge-jacuzzi coreboot Change-Id: I2f4f084ece067e9884c23004506b450a281a77a6 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45101 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-08hatch: Create dooly variantTony Huang
Create the dooly variant of the puff reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.1.2). BUG=b:155261464 BRANCH=puff TEST=util/abuild/abuild -p none -t google/hatch -x -a make sure the build includes GOOGLE_DOOLY Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Change-Id: I8e714cc9bf4a49266da77db88f8c4a3ca45878d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Sam McNally <sammc@google.com>
2020-09-07mb/google/zork: update TS power control for dirinbozKevin Chiu
3.6 schematic will separate TS power from eDP PP3300 to GPIO for power control and correct GPIO assignment from GPIO_90 to GPIO_32 instead. BUG=b:161579679 BRANCH=zork TEST=emerge-zork coreboot Change-Id: Ieef67e1d04201c5d9e1dc625c519e6d0307c55f0 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45061 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-07ec/system76: Add console supportJeremy Soller
This adds support for line-buffered console output to System76 EC firmware. Once the print command is received, the EC firmware multiplexes the output to any enabled console on the EC. This can be a memory ringbuffer, a parallel port (using the keyboard connector), or i2c (using the battery connector). Once the entire buffer is sent, it sets the command register to 0, indicating completion. For more information, please see: https://github.com/system76/ec/blob/master/doc/debugging.md Tested on system76/lemp9 with CONSOLE_SYSTEM76_EC enabled. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: I861bf3e22f40dd6c3ec7ba1d73711b399358e332 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-09-07mb/system76/lemp9: Add SMBIOS descriptions to root portsFelix Singer
Change-Id: Ie663d424edbbeeb8f5691b00f3977f7501e9ab45 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45110 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-09-07mb/system76/lemp9: Move PCIe root port config into devicetreeFelix Singer
Change-Id: Idd38ab530fd8a0c16231f3499eac393c333a9a92 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-09-07mb/system76/lemp9: Add comments to SATA portsFelix Singer
Change-Id: I8db3bfbdb557a84413408b4b39a13b24c45497cc Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-09-07mb/system76/lemp9: Move USB options into devicetreeFelix Singer
Change-Id: I3371bed7c2678fbc3304f53af1413a93462933f5 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-09-07drivers/mrc_cache: Reduce severity of `region not found` log messageAngel Pons
On autogenerated FMAPs, there's no `UNIFIED_MRC_CACHE` region. The current code will print a spurious error message about it, though. Reduce the log level to BIOS_INFO to avoid confusion. Change-Id: I0961bb2a7d2d81dc5c0d28f6e6c29b320421fc3e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45076 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-07mb/system76/lemp9: Enable SataPortsDevSlpFelix Singer
Enable SataPortsDevSlp for SATA ports 2 and 3. Change-Id: Id6c69f4a6fe45cb5c6aad3f42c741a2724c6166c Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45119 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-09-07mb/system76/lemp9: Move SATA options into devicetreeFelix Singer
Change-Id: Idf64d98b36ca95a8bc17a6544993c26e23851cd8 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45107 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-09-07mb/system76/lemp9: Don't configure unused SATA / USB portsFelix Singer
Change-Id: Ic5587402700d7b137e20538549b8a09a64cb6a9f Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45106 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-09-06util/mb/google/tmpl/puff: Update DPTF to the new implementationSam McNally
Apply the change in CB:44905 to the puff template, moving DPTF policies from static ASL files into the new SSDT-based DPTF implementation. BUG=b:158986928 BRANCH=puff TEST=None Change-Id: I601fd4c6aeaa3afee0f7fd9d13376f2fffd6d793 Signed-off-by: Sam McNally <sammc@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45073 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-09-06soc/intel/apl: Add panel power and backlight configurationNico Huber
Change-Id: Id8892ac7aafce1006831e2d9f2806919f5950756 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40694 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-06mb/system76/lemp9: enable I2C HID touchpadJeremy Soller
Enable the I2C HID driver, configure I2C bus 0 and add the touchpad device to the devicetree. Tested on lemp9, touchpad confirmed to use i2c-hid driver in Linux instead of PS/2. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: Ic3a90fda134b1d53f28ab687b3033ec52fee843b Reviewed-on: https://review.coreboot.org/c/coreboot/+/43623 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-06mb: remove duplicated Make code for spd.bin generationMichael Niewöhner
Drop duplicated code for spd.bin generation that is provided globally in lib/Makefile.inc. For all affected boards it has been verified that the output binary functionally matches the original one. The changed execution order of Make instructions influenced the cbfs file order. Hence, the rom images can't be compared directly. Thus, the output files of the two timeless abuild runs have been compared. Further, it was verified that the final files in cbfs stay identical, by comparing the extracted cbfs of each board. The boards (possibly) needing modification could be found with something like this (with false positives, though): find src/mainboard -name Makefile.inc | \ xargs egrep 'SPD_BIN|SPD_DEPS' | cut -d: -f1 | sort -u Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Icd3ac0fd6c901228554115c6350d88bb49874587 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-06mb/system76/lemp9: Use absolute path for _GPEJeremy Soller
_GPE cannot be anywhere but at the root of the ACPI namespace. This change ensures that is always the case. Tested on lemp9, GPE still in correct location. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: Ib31683b06e61da4b1859cd939c36879cebf4c03c Reviewed-on: https://review.coreboot.org/c/coreboot/+/43630 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-06mb/system76/lemp9: Drop DeepSx settingsJeremy Soller
The GPIOs required for DeepSx (e.g. SLP_SUS#) are not hooked up on the lemp9. Therefore, drop the DeepSx settings. Tested on lemp9, suspend works correctly. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: Iab179abd7adc3a65dcfc43ce1b5742d514b711fb Reviewed-on: https://review.coreboot.org/c/coreboot/+/43629 Reviewed-by: Michael Niewöhner Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-06mb/system76/lemp9: Enable SA thermal deviceJeremy Soller
Tested on lemp9, SA thermal device appears in lspci. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: I527e586b1dae5f8087d2364c63c9db5bcb643214 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner
2020-09-06mb/*: devicetree: drop now unneeded USBx_PORT_EMPTYMichael Niewöhner
Setting USBx_PORT_EMPTY is not a requirement anymore, since unset devicetree settings default to 0 and the OC pin now only gets set when the USB port is enabled (see CB:45112). Thus, drop the setting from all devicetrees. Change-Id: I899349c49fa7de1c1acdca24994ebe65c01d80c6 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-09-06soc/intel: skl,cnl,icl,jsl,tgl: disable usb over-current pin by defaultMichael Niewöhner
Fsp configures the USB over-current pin and overrides the according pad configuration to NF1, regardless of the port being configured as disabled. Thus, set the OC pin to 0xff ("disabled") in this case to prevent this. This allows us to skip setting USBx_PORT_EMPTY in the devicetree for disabled USB ports. Change-Id: Ib8ea2ea26c0623d4db910e487b37255e907b299d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45112 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-05soc/intel/alderlake/bootblock: Do initial SoC commit till bootblockSubrata Banik
List of changes: 1. Add required SoC programming till bootblock 2. Include only required headers into include/soc 3. Add CPU/PCH/SA EDS document number and chapter number 4. Include ADL-P related DID, BDF Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I204e692fabb84fce297bebee465f4ca624c6fe56 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-05mb/system76/lemp9: Don't enable unused USB3 portFelix Singer
Don't configure USB3 port 4 since it's not used. Change-Id: I6919f5ec3a5be53373f2ab75063764287b53baf5 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45105 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Michael Niewöhner
2020-09-04libpayload/xhci: Fix Slot State field width definitionCaveh Jalali
According to the xHCI spec, the Slot State field in the Slot Context Data Structure is 5 bits wide. So, fix the code to match. ref. xHCI spec 1.2 section 6.2.2, Figure 6-2: Slot Context Data Structure BUG=none TEST=xHCI compiles Change-Id: I0ae735af3d0840aeee846fa939c37af9aea3dff1 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45023 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-04mb/*/Kconfig: Drop redundant 'select CPU_INTEL_HASWELL'Elyes HAOUAS
CPU_INTEL_HASWELL is already selected at nb/intel/haswell/Kconfig. Change-Id: I608286aae72bc740be642a72109472fb235f37bf Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-04soc/intel/{jasperlake,tigerlake}/Kconfig: Drop redundant 'select ↵Elyes HAOUAS
CPU_INTEL_COMMON_SMM' CPU_INTEL_COMMON_SMM is set to yes if CPU_INTEL_COMMON at cpu/intel/common/Kconfig. Change-Id: I7c8e1bb6b7c3199a24711b64a6cbba4de190c6d9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-04soc/intel/cnl: Enable HECI3 depending on devicetreeFelix Singer
Currently HECI3 gets enabled by the option Heci3Enabled, but this duplicates the devicetree on/off options. Therefore depend on the devicetree for enablement of the HECI3 controller. All corresponding mainboards were checked if the devicetree configuration matches the Heci3Enabled setting, and divergent devicetrees were adjusted. Change-Id: Ic7d52096aee225c2ced1e1bc29ca850fe5073edc Signed-off-by: Felix Singer <felix.singer@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44579 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-04mb/google/volteer/variant/lindar: Update memory settingsRasheed Hsueh
Based on the Lindar's schematic, generate memory settings. util: rename lp4x spds to include "lp4x-" in name BUG=b:161089195 TEST=FW_NAME=lindar emerge-volteer coreboot chromeos-bootimage Signed-off-by: Rasheed Hsueh <rasheed.hsueh@lcfc.corp-partner.google.com> Change-Id: I1ec35d62f8ed21356329b78a614114edad78c2bc Reviewed-on: https://review.coreboot.org/c/coreboot/+/45064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Michael Niewöhner
2020-09-04soc/intel/tigerlake: Remove unused PID_SDX macroSubrata Banik
Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I177a146643f2196018182502fff8d82830e139dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/45019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-03soc/amd/picasso/acpi: Remove padding in IVRS table caused by realignment.Jason Glenesk
Previous CL (1916f8969b10e27fe06b3e0eb1caae632bd947f6) misinterpreted spec as requiring size alignment on all IVHD device entries. The correct requirement specifies only for 4-byte entries. The unneeded realignments result in gaps in the table. The kernel hangs in early boot due to the malformed table. Remove 8-byte entry alignment. BUG=b:166519072 TEST=Boot fully to morphius board with and without amd_iommu kernel parameter. Confirm IVRS contains no alignment gaps/corruption. Change-Id: Iddcff98279be1d910936b13391dd2448a3bb2d74 Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-09-03soc/amd/picasso: Set max_speed_mts and configured_speed_mtsRob Barnes
ddr_frequency is deprecated. Set max_speed_mts and configured_speed_mts instead. This will result in SMBIOS type 17 displaying more accurate speed information. BUG=b:167218112 TEST=Boot ezkinil and observe dmidecode -t17 dmidecode -t17 # dmidecode 3.2 Getting SMBIOS data from sysfs. SMBIOS 3.0 present. Handle 0x000B, DMI type 17, 40 bytes Memory Device Array Handle: 0x000A Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 4096 MB Form Factor: SODIMM Set: None Locator: Channel-0-DIMM-0 Bank Locator: BANK 0 Type: DDR4 Type Detail: Synchronous Speed: 3200 MT/s Manufacturer: Unknown (0) Serial Number: 00000000 Asset Tag: Not Specified Part Number: MT40A512M16TB-062E:J Rank: 1 Configured Memory Speed: 2400 MT/s Minimum Voltage: Unknown Maximum Voltage: Unknown Configured Voltage: Unknown Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I1879676ea9436b6d19c768f1b78487a4e179f8d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44984 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 16:49:57 +0000