summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-11-13vc/intel/fsp/fsp2_0/alderlake: Update FSP header file version to 1454Subrata Banik
List of changes: 1. FSP-M Header: - Add new UPD Lp5CccConfig - Adjust Reservedxx UPD Offset 2. FSP-S Header: - Adjust UPD Offset for Reservedxx, PsOnEnable, RpPtmBytes, PmSupport, GtFreqMax, Hwp, TccActivationOffset, Cx, PchLockDownGlobalSmi, PcieRpLtrMaxSnoopLatency, PcieRpLtrMaxNoSnoopLatency, UnusedUpdSpace45 Change-Id: I973f48b2af0336f04ee16cd1c4c91940a49af0e3 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47244 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/{skl,cnl}: replace PM ACPI timer dt option by KconfigMichael Niewöhner
Select `PM_ACPI_TIMER_OPTIONAL` to enable the new PM ACPI Kconfig and set the FSP option for PM ACPI timer enablement from its value instead of using the old devicetree option. Also drop the obsolete devicetree option from soc code and from the mainboards and add a corresponding Kconfig entry instead. Change-Id: I10724ccf1647594404cec15c2349ab05b6c9714f Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45955 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/{skl,cnl}: drop duplicate PM ACPI timer disablingMichael Niewöhner
FSP already disables the PM ACPI timer, when EnableTcoTimer=0. Test: clevo/l140cu and supermicro/x11ssm-f have the PM ACPI timer disable bit set when EnableTcoTimer=0. Change-Id: If370d3acf87ae6d1d7c64bf27228877cdd92ab2d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-11-13soc/intel/common: add Kconfig to enable/disable the ACPI PM timerMichael Niewöhner
Currently, the ACPI PM timer state gets set in devicetree by the option PmTimerDisabled. However, it is not board design dependent. Thus, add a user-selectable Kconfig option. Disabling the PM ACPI Timer is only valid when PM Timer emulation is supported and is only possible, when there is a hardware PM Timer (APL does not have one for example). SoCs, where the hardware PM Timer can be disabled must select `PM_ACPI_TIMER_OPTIONAL`. This new Kconfig gets used in the follow-up commits of this series. Change-Id: I7f607f277eb14f84a7370ffb25a13226e7ccc917 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-11-13mb/hp/folio_9480m: Update northbridge ACPI filenameAngel Pons
Fix build errors, since `haswell.asl` was dropped in commit 79e3a1f8a5 (nb/intel/haswell/acpi: Merge `haswell.asl` into `hostbridge.asl`) Change-Id: Iaec5de2d74dd81c58a581bb511ba6a63629141aa Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47575 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13Doc/relnotes/4.13: Add several relevant changesAngel Pons
While some of these have little impact, they are worth mentioning here. Change-Id: Idbf629ae77b8918ff1d93edb7b6c4669bbbe17df Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47444 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-11-13soc/amd: factor out _SOC_DEV macro into common blockFelix Held
TEST=Timeless build doesn't change for Mandolin and Gardenia. Change-Id: I1aef68459569536207697bfca407145a7b5334f4 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-13soc/amd/common/block/include: make include guards more uniformFelix Held
TEST=Timeless build doesn't change for Mandolin and Gardenia. Change-Id: I5d3ae1459c333658f4c86388f1822d92ca13c658 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-13mb/supermicro/x11-lga1151-series: Fix up comment styleAngel Pons
Change-Id: I5b6191d2b5f6fd6d127934eda56e3c24181b0c4c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47565 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13mb/clevo/cml-u: Fix up comment styleAngel Pons
Change-Id: Idefc15fec1d62d68d88e91c76f59e1a60a3996b6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47564 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/broadwell: Split up acpi.cAngel Pons
Change-Id: Ie9c57b6f5c226cee8797027941fa03e69de52923 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46796 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/broadwell: Flatten northbridge folder structureAngel Pons
Having folders for bootblock and romstage is no longer necessary. Change-Id: I7d1f4063de6a1a1ff9ee7478e94f889a50102054 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46795 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/broadwell: Relocate CPU filesAngel Pons
Change-Id: Ib2ddce78db21db9c8deac632a77ecd71eb9887c2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46794 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13broadwell: Flatten `acpi_init_gnvs` functionAngel Pons
Instead of relying on mainboards to call it, do like Lynx Point. Change-Id: Idb7457e0734e19d0a26f0762079e273b6e740475 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46793 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13broadwell: Factor out `acpi_fill_madt` functionAngel Pons
It is identical for all Broadwell mainboards, thus deduplicate it. Change-Id: I74559fbe42e44aa4d15ced5d88f6c15a1bf5203b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46792 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13nb/intel/haswell/acpi: Do not add PEG devices for LPAngel Pons
Haswell Low Power variants do not have PEG at all. Change-Id: Ia5577104b00bfc8713b54c3c43f8dcdd3bc367df Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46791 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13nb/intel/haswell/acpi: Move PEG and CTDP includes downwardsAngel Pons
This change is just to align with Broadwell. Change-Id: I25a481503f5df79502f5ae60c87e7dacb781adad Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46790 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13nb/intel/haswell/acpi: Merge `haswell.asl` into `hostbridge.asl`Angel Pons
Tested with BUILD_TIMELESS=1, Google Wolf remains identical. Change-Id: I710581156937b042ba4cf5948c65d0795ad37bbf Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46789 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13nb/intel/haswell/acpi/hostbridge.asl: Drop unused registersAngel Pons
These are not used anywhere and are not present on Broadwell. Change-Id: I2d1359286ac719cb5daefc955d5c6085e2949c1f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46788 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13nb/intel/haswell/acpi/peg.asl: Leverage ASL for DEVENAngel Pons
There's no need to perform manual shifting and masking when ACPI allows one to painlessly describe bitfields of a register. The now-unused DVEN definition will be dropped in a follow-up, alongside other definitions. Change-Id: Iab6972c78c1114c8e3dfee28320ae233421ff154 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46787 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/broadwell/acpi: Rename `systemagent.asl`Angel Pons
Rename it to `hostbridge.asl`, which is what Haswell uses. Change-Id: I6f97fc5c9459fe6b66dcfcf51900c751beda0ebe Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46786 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13sb/intel/lynxpoint/acpi/pch.asl: Drop unused FD definitionsAngel Pons
These Function Disable definitions have been copied from Cougar Point, are not used by any mainboard, and may be incorrect. So, remove them. Change-Id: I36f732bce22ec33aab42beababe54c4d88e0205b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46784 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13haswell/lynxpoint: Drop remaining uses of `ISLP` methodAngel Pons
There's no need to dynamically differentiate between traditional and Low Power platforms at runtime, and doing so makes code reuse more complex. Change-Id: Id40f2f5f41db00487af9115eabee8874c2399030 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46785 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13sb/intel/lynxpoint/acpi/gpio.asl: Serialize GWAK methodAngel Pons
Commit 576b7c7 (broadwell: gpio.asl: Make GWAK method serialized) made GWAK serialized for Broadwell. This commit follows suit on Lynx Point. The reason to serialize this method is because it creates named objects which depend on input parameters, and thus cannot be created elsewhere. Change-Id: I892700df3bba079e3280008f619017e3954d5a06 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46783 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13sb/intel/lynxpoint/acpi: Split USB into EHCI and xHCIAngel Pons
Tested with BUILD_TIMELESS=1, Google Wolf does not change. Change-Id: I0ce8f1e4aaa86d2f7607fec9214dc64d1f530c88 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46782 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13sb/intel/lynxpoint/acpi/lpc.asl: Simplify GPIOBASE resourceAngel Pons
LynxPoint-LP handles GPIOs differently, and LynxPoint-H has the same GPIO kind as previous-generation PCHs, such as Cougar Point. Remove some unneeded logic from `_CRS` and declare the GPIOBASE resource statically. The preprocessor allows later ACPI deduplication to remain reproducible. Change-Id: If771d5b6c3a1623da7d015ed50199877615409b2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46781 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13sb/intel/lynxpoint/acpi: Statically define _PRW valuesAngel Pons
In order for ACPI deduplication to be reproducible, the `ISLP` method needs to disappear. Replace the _PRW methods with a name and a macro. Change-Id: Id0a46965b66f1a70e8f8868af01a535207c9f5c7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46780 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/broadwell/pch/acpi/hda.asl: Rename to `audio.asl`Angel Pons
This is merely to ease diffing Lynx Point and Broadwell ASL code. Tested with BUILD_TIMELESS=1, Google Buddy does not change. Change-Id: I9f6ab98388d2a2915a48377ebe9e724cfee4b95f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46779 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13soc/intel/broadwell/pch/acpi: Clean up cosmeticsAngel Pons
Use ASL 2.0 syntax where possible and uniformize code style to match the IASL disassembly. Some `Store` in gpio.asl change the binary if touched. Tested with BUILD_TIMELESS=1, Google Buddy does not change. Change-Id: Ic13c081fd7ee2212d851cc14263c1e2fd8970072 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46778 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13sb/intel/lynxpoint/acpi: Clean up cosmeticsAngel Pons
Use ASL 2.0 syntax where possible and uniformize code style to match the IASL disassembly. Some `Store` in gpio.asl change the binary if touched. Also remove outdated comment and remove `LynxPoint` from `serialio.asl`. Tested with BUILD_TIMELESS=1, Google Panther does not change. Change-Id: Ie0994fa546ff54ebb533afcc6205efb36da99a67 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46777 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13mb/google/reef: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: Ifc6dd5f6549e7501f350afe8456a9a8096edcc25 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47425 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-13mb/google/poppy: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: Ida1b1d05b39e67a9eba3bfaecca37f38821a438b Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47423 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-13mb/google/kahlee: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: Ib2f203b5f5eea5c25cfd4543f5ed9f15101b1735 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47422 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-13mb/google/octopus: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: Ic334816712370da63471135da8dd598ab02d54ef Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47421 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-13mb/google/zork: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: I75a92616f11054993ff5a5bfefce5c3f4638c07c Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-13mb/google/drallion: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: Iff00667377eecedcf0b83bcfc0bf50bd4c3411eb Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-13mb/google/deltaur: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: I1773973f64bcc5ef6bd1856c5d8eb998bb6a4888 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47418 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-13mb/google/hatch: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: I320198d56131cf54e0f73227479f69968719b2a7 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47417 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-13mb/google/volteer: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: Ie7b82ea07ef97b2096d75229c445bd3a65cb3be0 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-13mb/google/dedede: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=emerge-dedede coreboot Change-Id: I9d8fa57ae0f554896a4a0722e3e89567676382d4 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-13mb/google/dedede/var/metaknight: enable USB2 port for cameraTim Chen
Enable USB2 port 5 for user facing camera. Enable USB2 port 6 for world facing camera. BUG=b:169813211 BRANCH=None TEST=build metaknight firmware Change-Id: Iecb7787d46eab7096dec9f838a16da101105e09a Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-13mb/google/dedede/var/metaknight: Disable I2C port 3Tim Chen
Disable I2C port 3 for metaknight BUG=b:169813211 BRANCH=None TEST=build metaknight firmware Change-Id: Ic4a056d53a8c8abd04a9b786428da0986a255276 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-13MAINTAINERS: add trailing slash to make gerrit add me as reviewerMichael Niewöhner
The trailing slash is required to make gerrit add me on changes for the whole tree, not just for the directory itself, which obviously would only change if being deleted or renamed. This also fixes the behaviour for Felix Singer. Change-Id: I601aebd4335c7326deca0118725a6f25cec524a9 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-11-13soc/intel/xeon_sp: Tidy up adding MADT ioapic entriesArthur Heymans
Add a helper function to print out debug info and add the MADT entry. Change-Id: I1a00f87c6edef530c5352929ee9279782be4b112 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47299 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-11-12mb/amd/mandolin/Kconfig: update help text for AMD_LPC_DEBUG_CARDFelix Held
The existing help text wasn't updated for Mandolin after it was copied from an older reference board and contained some information that doesn't apply to Mandolin. Change-Id: Ib34abb2ee8b289df5f7085957042fe00ad506ca9 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-12mb/amd/mandolin/Kconfig: add help text for the EC blobFelix Held
Change-Id: If8d3ebdb9a41330312c26fb5796c07de1b87b3eb Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47480 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-12mb/clevo/l140cu: add CMOS layout and defaultsMichael Niewöhner
Add CMOS layout and defaults files and enable CMOS options in Kconfig. Test: changed loglevel setting, rebooted and checked the log. Change-Id: Ia1a27818b2d12fb7578189e5748b8073c8f928e3 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46311 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-12soc/intel/xeon_sp: Use a common function to get the IIO HOBArthur Heymans
TESTED ocp/deltalake still boots. Change-Id: I69f336c1ff348b8e820340b84494929f2c58ce72 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47296 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-12drivers/i2c/rx6110sa: Delete unused definesWerner Zeh
The defines for RX6110SA_SLAVE_ADR and RX6110SA_I2C_CONTROLLER are not used anymore and can be deleted. Change-Id: I3cddf7a9e2f757a22c729ae0f0ff767d55909b9c Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: siemens-bot Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2020-11-12drivers/i2c/rx6110sa: Add basic ACPI supportWerner Zeh
This patch adds basic ACPI support for the RTC so that the OS is able to use this RTC via the ACPI interface. If the Linux kernel is able to find the RTC in ACPI scope, you should see the following lines in dmesg, where [n] is an enumerated number: rx6110 i2c-RX6110SA:00: rtc core: registered RX6110SA:00 as rtc[n] rtc rtc[n]: Update timer was detected Change-Id: I9b319e3088e6511592075b055f8fa3e2aedaa209 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47235 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-11-12mb/*/Kconfig: Annotate closing endif with corresponding conditionPaul Menzel
It’s common to annotate the closing endif, so do it for these four files. Change-Id: Ia5d071e1f544c9dea5af9c6bc3c605d9a0c5c0f5 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-12soc/intel/alderlake: Add PCH ID 0x5181Subrata Banik
List of changes: 1. Add new PCH ID 0x5181 into device/pci_ids.h 2. Update new PCH ID into common lpc.c 3. Add new PCH ID description into report_platform.c TEST=Able to build and boot ADLRVP with new PCH ID. Change-Id: I4343b7343876eb40c2955f6f4dd99d6446852dc0 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47474 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-12Delete soc/qualcomm/sdm845Julius Werner
Work on this SoC was abandoned and never finished. It's not really usable in its current state, so let's get rid of it. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I23453e3e47ac336ab61687004470e5e79172cafe Reviewed-on: https://review.coreboot.org/c/coreboot/+/47428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-12Delete mainboard/google/chezaJulius Werner
Work on this mainboard was abandoned and never finished. It's not really usable in its current state, so let's get rid of it. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I4cd2e2cd0ee69d9846472653a942fa074e2b924d Reviewed-on: https://review.coreboot.org/c/coreboot/+/47427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-11mb/google/volteer: Configure IA32_L3_MASK_x MSRs for L3 CQOSShreesh Chhabbi
Selecting USE_CAR_NEM_ENHANCED_V1 as of now. This selection in Kconfig programs IA32_L3_MASK_1 (0xc91) & IA32_L3_MASK_2 (0xc92). These will select ways for eviction & non-eviction. TGL will have to switch back to USE_CAR_NEM_ENHANCED_V2 once the IA32_L3_SF_MASK_1 (0x1891) & IA32_L3_SF_MASK_2 (0x1892) programming requirements are understood. Bug=b:171601324 BRANCH=volteer Test=Build coreboot for volteer. Boot on SKU that has 4MB L3 cache. Change-Id: Ifc77856e26ab26f9fbb2693f70c751f43337421b Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-11soc/intel/tigerlake: Update Kconfig for NEM Enhanced ModeShreesh Chhabbi
This change switches the selection of CAR mode so that INTEL_CAR_NEM_ENHANCED_V2 is the default unless mainboard selects INTEL_CAR_NEM. INTEL_CAR_NEM is selected only by mainboards using older silicon (ES1 or ES2) that did not support NEM enhanced mode. This enables NEM Enhanced Mode for TGL-U/Y RVPs. Bug=b:171601324 BRANCH=volteer Test=Build coreboot for volteer. Boot on SKU that has 4MB L3 cache. Change-Id: Ib6e041261cb8ca9c6e602935da4962aac0d9ece5 Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47259 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-11util/futility: Don't refresh the binary all the timePatrick Georgi
Due to the phony dependency to check for openssl, vboot-futility was always rebuilt, and because it was newer than coreboot-futility, it was always copied over. Do that in parallel often enough and you run into race conditions, as we did on our builders. Mark check-openssl-presence as order-only dependency so that it's executed (and can bail out) but doesn't force regeneration of vboot-futility. Change-Id: Ib7fb798096d423d6b6cba5d199e12fe5917c3b41 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-11util/inteltool: add missing special function pads for CNL-LPMichael Niewöhner
Add the missing special function gpio pad groups for CNL-LP. The groups and names are documented in the PCH EDS, in Linux (linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places. Also, see soc/intel/tigerlake for reference. Change-Id: I0509552da6ffad395c2b89df1676e1903c783695 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45201 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-11util/inteltool: add missing special function pads for CNL-HMichael Niewöhner
Add the missing special function gpio pad groups for CNL-H. The groups and names are documented in the PCH EDS, in Linux (linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places. Also, see soc/intel/tigerlake for reference. Change-Id: Ib83aeef9f4b6aa174e61ccbd87fb7b6450ed773b Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45204 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-11util/inteltool: add missing native functions of special pads for CNL-HMichael Niewöhner
Add the missing native functions for special gpio pads for CNL-H, which are documented in the PCH EDS and other places. Also, see soc/intel/tigerlake for reference. Change-Id: I71339d66362d29806c91375c214e9fb84c989201 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45203 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-11util/inteltool: rename GPIO_RSVD_* to their correct names for CNL-HMichael Niewöhner
The names of the GPIO_RSVD_* are documented in the PCH EDS, in Linux (linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places. Also, see soc/intel/tigerlake for reference. Change-Id: Ifd6cabb646000c8dff695c5c4f7196b2779f1430 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45202 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-11util/inteltool: add missing native functions of special pads for CNL-LPMichael Niewöhner
Add the missing native functions for special gpio pads for CNL-LP, which are documented in the PCH EDS and other places. Also, see soc/intel/tigerlake for reference. Change-Id: Iedb726aa3afdbbbedafb67f6b7668bf591c2b9b4 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-11util/inteltool: rename GPIO_RSVD_* to their correct names for CNL-LPMichael Niewöhner
The names of the GPIO_RSVD_* are documented in the PCH EDS, in Linux (linux/drivers/pinctrl/intel/pinctrl-cannonlake.c) and other places. Also, see soc/intel/tigerlake for reference. Change-Id: I86c7159d9f48560c41efdfe49f162aef00499d13 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45200 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-11Documentation/releases: Add ASan to 4.13 relnotesHarshit Sharma
Change-Id: I2953729c69dfcfa8b34192b3e1623fdfad87ca3a Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45118 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-11sb/intel/lynxpoint/sata: Simplify RMW operationsAngel Pons
Introduce the `sir_unset_and_set_mask` helper and update the one PCI read-modify-write operation that is somehow not reproducible. Change-Id: I30ad6ef8ad97ee0a8dc2297fba5bbbfe24f00f1c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-11mb/hp/folio_9480m: Drop `sata_ahci` from devtreeAngel Pons
Commit 8084b38568 (sb/intel/lynxpoint/sata: Always use AHCI mode) dropped the devtree option, but missed this recently-added mainboard. Change-Id: I6ab3a763c0bcd7431193c48e473639589b1a1e1a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47426 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-11-10sb/intel/lynxpoint/sata: Always use AHCI modeAngel Pons
The other two modes are not used by any mainboard, and the code seems to be copied from older southbridges. As the code looks incorrect, drop it. Change-Id: I374546279a85cead1aea13e0952bbfd6f643a75b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47022 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-10mb/asus/f2a85-m: Disable `HUDSON_LEGACY_FREE` for working serial consolePaul Menzel
The Asus F2A85-M, F2A85-M LE and F2A85-M PRO all have a Super I/O, and therefore have legacy devices like a serial console. Selecting `HUDSON_LEGACY_FREE` currently disable the serial console during bootup in romstage, which is undesired. So, deselect the symbol by default. TEST=Boot Asus F2A85-M PRO and verify serial console is *not* disabled during romstage. Change-Id: Ia6588c0d4b2c24c7cb9da04805d13274c8ae295e Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47363 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Mike Banon <mikebdp2@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-10soc/intel/tigerlake: Log PM event from an internal deviceKarthikeyan Ramasubramanian
Add support to check for the Power Management (PM) Status bit for various internal devices like USB, CNVi etc. and log them into the event log for debugging purposes. BUG=b:172279037 BRANCH=volteer Change-Id: Ib3d0bf33d780444f8240f749a3319212c985950d Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-10soc/intel/jasperlake: Log PM event from an internal deviceKarthikeyan Ramasubramanian
Add support to check for the Power Management (PM) Status bit for various internal devices like USB, CNVi etc. and log them into the event log for debugging purposes. BUG=b:172279037 TEST=Build and boot to OS in Drawlat. Ensure that the wake up event is logged into the event log for one of the internal devices eg. USB bluetooth. 8 | 2020-11-05 15:04:16 | S0ix Enter 9 | 2020-11-05 15:04:29 | S0ix Exit 10 | 2020-11-05 15:04:29 | Wake Source | PME - XHCI (USB 2.0 port) | 8 11 | 2020-11-05 15:04:29 | Wake Source | GPE # | 109 12 | 2020-11-05 15:05:08 | S0ix Enter 13 | 2020-11-05 15:05:14 | S0ix Exit 14 | 2020-11-05 15:05:14 | Wake Source | PME - XHCI (USB 2.0 port) | 8 15 | 2020-11-05 15:05:14 | Wake Source | GPE # | 109 Change-Id: I9f43675b698bf310f6b98b5e775d1259607abbcd Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47226 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-10tests: Add lib/edid-test test caseJakub Czapiga
Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: I796e660eebc4d2c3c32207bd3a6ee44aaffeb325 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-11-10cpu/x86/mtrr.h: Rename CORE2 alternative SMRR registersArthur Heymans
It is too easy to confuse those with IA32_SMRR_PHYS_x registers. Change-Id: Ice02ab6c0315a2be14ef110ede506262e3c0a4d5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46896 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-10sec/intel/cbnt: Stitch in ACMs in the coreboot imageArthur Heymans
Actual support CBnT will be added later on. Change-Id: Icc35c5e6c74d002efee43cc05ecc8023e00631e0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46456 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-10mb/google/zork: Create Shuboz variantKane Chen
Create the shuboz variant of the zork reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.2.0). BUG=b:172021093 BRANCH=none TEST=emerge-zork coreboot Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I3f62625f8cbde1c9adf8ab335edeb9e811e32679 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47152 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-10mb/hp: Add HP EliteBook Folio 9480mIru Cai
The code is based on autoport, with necessary modifications. This laptop uses SMSC MEC1322 embedded controller, but the EC interface is the same as the EliteBook laptops of previous generations that use KBC1126 EC. So it still uses ec/hp/kbc1126, but does not need EC firmware inserted into CBFS. We also need to leave the end of the OEM flash content untouched, so the default ROM size is set to 12MiB instead of 16MiB, and we need to modify the IFD when flashing. Thanks to persmule for providing the laptop and pointing out how to program the system flash chip of it. Change-Id: I2328c43cbb1f488aa1d0ddd9116814d971e5d8ae Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-10drivers/wifi: Check device is of type PCI before checking vendor IDFurquan Shaikh
CB:46865 ("mb, soc/intel: Reorganize CNVi device entries in devicetree") reorganized the devicetree entries to make the representation of CNVi device consistent with other internal PCI devices. Since a dummy generic device is added for the CNVi device, `emit_sar_acpi_structures()` needs to first check if the device is PCI before checking the vendor ID. This ensures that SAR table generation is skipped only for PCIe devices with non-Intel vendor IDs and not for the dummy generic device. BUG=b:165105210 Change-Id: I3c8d18538b94ed1072cfcc108552f3a1ac320395 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
2020-11-10mb/google/puff/var/dooly: Add WEIDA touchscreen deviceTony Huang
Adds ACPI properties for WDT8762A device. Per spec v0.8 HID name WDHT2002 T14=100ms BUG=b:163561649 BRANCH=puff TEST=emerge-puff coreboot and check system dmesg and evtest can get device. Change-Id: I178e9d5aa1e1501d33b3cd4092f3f522bb6f1a74 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47280 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-11-09soc/intel/skylake: Enable PCH thermal depending on devicetreeBenjamin Doron
Hook up PCH thermal subsystem configuration to devicetree. Change-Id: I84bac2cec079370370ecf1e5e4742e6704921d40 Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-09Documentation: Introduce HP Sure Start and the method to bypass itIru Cai
Change-Id: Id198afdaa13b4c361e1b77a56d5a2436ed1c4c86 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45577 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09soc/nvidia/tegra124/include/soc/clk_rst.h: Remove extra tabElyes HAOUAS
Change-Id: I0c606fd129c200446744f7a67ae63fec6d8e1684 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-11-09cpu/intel/model_206ax: Get CPU frequencies for SMBIOS type 4Michał Żygowski
Calculate the frequencies based on the appropriate MSRs and pass them to SMBIOS tables generator. Ivybridge microarchitecture does not yet implement CPUID 16H leaf used to obtain the required frequencies. TEST=Intel Core i7-3770, TianoCore UEFI payload displays the CPU frequency correctly equal 3.4GHz in Boot Manager Menu, dmidecode shows correct frequencies according to Intel ARK, 3.4GHz base and 3.9GHz turbo Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Iefbae6111d39107eacac7e61654311646c6981eb Reviewed-on: https://review.coreboot.org/c/coreboot/+/47058 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-09soc/intel/jasperlake: Enable Intel FIVR RFI settingsMaulik V Vaghela
We already have RFI UPD settings to mitigate RFI noise issues in platform. These UPDs were not getting filled via devicetree but needed to be filled from fsp_params.c Exporting these UPDs to chip.h will allow OEM/ODMs to fill it directly from devicetree and also allow us to control it based on boards instead of keeping it common across SoCs. BUG=b:171683785 BRANCH=None TEST=Compilation works and we're able to fill UPD from devicetree.Value gets reflected in FSP UPDs. Change-Id: I495cd2294368e6b3035c48b9556a83418d5632de Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47286 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09mb/emulation/q35: Define pm_acpi_smi_cmd_portArthur Heymans
The X86 Qemu targets use the AMD64 SMM save state, but unlike most AMD CPU's the PM ACPI SMI port is not configurable and uses the Intel default APM_CNT, 0xb2 port. This will be used by the common save state handler. Change-Id: Ifee9476f628a2df710fb4340ce6a19b008df1033 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45814 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09soc/amd/*/smi.h: Move the pm_acpi_smi_cmd_port function declarationArthur Heymans
This prototype will be used outside of soc/amd. Change-Id: Icc69cf8a910764b27edf64f0f527b8f6a9013121 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45813 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09cpu/x86/smm: Add a common save state handlingArthur Heymans
Currently coreboot has limited use for the SMM save state. Typically the only thing needed is to get or set a few registers and to know which CPU triggered the SMI (typically via an IO write). Abstracting away different SMM save states would allow to put some SMM functionality like the SMMSTORE entry in common places. To save place platforms can select different SMM save sate ops that should be implemented. For instance AMD platforms don't need Intel SMM save state handling. Some platforms can encounter CPUs with different save states, which the code then handles at runtime by comparing the SMM save state revision which is located at the same offset for all SMM save state types. Change-Id: I4a31d05c09065543424a9010ac434dde0dfb5836 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44323 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09cpu/x86/smm/smm.ld: Assert that CONFIG_MAX_CPUS <= 4Arthur Heymans
The SMM_ASEG code only supports up to 4 CPUs, so assert this at buildtime. Change-Id: I8ec803cd1b76f17f4dccd5c573179d542d54c277 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44322 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-09cpu/x86/smm/smihandler.c: Simplify smm revision handlingArthur Heymans
The ASEG smihandler bails out if an unsupported SMM save state revision is detected. Now we have code to find the SMM save state depending on the SMM save state revision so reuse this to do the same. This also increases the loglevel when bailing out of SMM due to unsupported SMM save state revision from BIOS_DEBUG to BIOS_WARNING, given that the system likely still boots but won't have a functioning smihandler. Change-Id: I57198f0c85c0f7a1fa363d3bd236c3d41b68d2f0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45471 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-09util/inteltool: Add support for Intel Lewisburg SKU C621AJingle Hsu
Add support for dumping GPIOs on Intel Lewisburg SKU C621A. Tested=On OCP Delta Lake DVT, verify it executes successfully. Change-Id: I58797914aa5816aedace094c179e832150ad5e2e Signed-off-by: Jingle Hsu <jingle_hsu@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47163 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-09mb/intel/adlrvp: Replace if-else-if ladder with switch constructSridhar Siricilla
The patch replaces if-else-if ladder with switch case for readability purpose. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I268db8bc63aaf64d4a91c9a44ef5282154b20a53 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47054 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09hatch: Create genesis variantMatt Ziegelbaum
Create the genesis variant of the puff reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.2.0). BUG=b:172620124 BRANCH=None TEST=util/abuild/abuild -p none -t google/hatch -x -a make sure the build includes GOOGLE_GENESIS Signed-off-by: Matt Ziegelbaum <ziegs@chromium.org> Change-Id: I70886c2c5a25f5de1a4941ff235547ee812fa50d Reviewed-on: https://review.coreboot.org/c/coreboot/+/47334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-11-09mb/intel/adlrvp: Add PMC.MUX.CONx device configuration for adlrvpV Sowmya
This patch adds the PMC MUX and CONx devices for adlrvp. Device specific method contains the port and orientation details used to configure the mux. BUG=b:170607415 TEST=Built and booted adlrvp. Verified the PMC.MUX CONx objects in SSDT tables. Change-Id: I3b5bb73991feb99577c16fea00c381dd0f855769 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-11-09soc/intel/xeon_sp: Don't add memory resource twiceMarc Jones
The resource function is called for each device VID/DID. Only add the memory resource map from the boot CPU (bus 0) and not for each socket/CPU. This is a NUMA architecture and has a shared memory map. All the resources must match across the sockets/CPUs, so they should only be added to the map once. Change-Id: Ia336f604441ae8d30b8418300da7c34ab9907cae Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-11-09soc/intel/xeon_sp: Move set_bios_init_completion()Marc Jones
Move set_bios_init_completion() and helper functions from skx and cpx soc_util.c to xeon common util.c. There are some slight differences between skx and cpx, so used the more correct cpx functions. Both cpx and skx platforms boot as expected. Change-Id: Ie416b3a43ccdd14a0eb542786593c2eb4d37450f Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47172 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09mb/purism/librem_cnl: Add new variant 'Librem Mini v2'Matt DeVillier
Add Kconfig entries, and update existing documentation to accomodate both v1/v2 versions of the board. Change-Id: I856bb914941211cfbec4fed871ba2a5a038e23c3 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46984 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09mb/purism/librem_mini: Fix USB_OC mapping in devicetreeMatt DeVillier
Correct USB over-current mappings in devicetree now that the GPIO config has been fixed per schematics. Change-Id: I564630231933c7c17a2c0a2a403fdcca9189b92e Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47222 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-09mb/purism/librem_mini: drop PcieRpSlotImplemented from LAN PCIeMatt DeVillier
The LAN NIC is onboard, not installed in a slot. Change-Id: I77ee7ee8c944b7942ca78d35cd881277c4030ab9 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47252 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-09mb/purism/librem_mini: Update smbios_slot_desc for M.2/WLANMatt DeVillier
Add strings for M.2 keying and number of PCIe lanes. Change-Id: I2e13749b50263ee5c2388a419bc8d784af6bd880 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47251 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09mb/purism/librem_mini: Fix PCIe clock source mapping in devicetreeMatt DeVillier
Correct PCIe clock source mapping in devicetree now that the GPIO config has been fixed. Move ClkSrcUsage/ClkSrcClkReq registers under their associated PCIe root ports. Change-Id: Ibdaba51d971a39a6da6df82652b7420d7324dee5 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-09mb/purism/librem_mini: Adjust GPIO pad config per schematicsMatt DeVillier
- set pads GPP_B6/B8 for PCIe CLK_REQ lines - set pad GPP_B14 to speaker output - adjust comment for GPP_C22 / USB3_P1_PWREN - set pad GPP_E4 to NF1 / SATA_DEVSLP0 - set pads GPP_E9/E10 to USB2_OC0#/USB2_OC1# Change-Id: I8bf8af620370ec2d4c864e513db5d710a9c65d27 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47220 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09console: Override uart base addressBryant Ou
Add a new CONFIG_OVERRIDE_UART_FOR_CONSOLE token to override the index of uart port, platform use a get_uart_for_console routine to decide what index value should be used for console. Signed-off-by: Bryant Ou <Bryant.Ou.Q@gmail.com> Change-Id: I2079bd1e5ffa209553383b6aafe3b8724849ba2a Reviewed-on: https://review.coreboot.org/c/coreboot/+/45405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-31 07:18:41 +0000