summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-23include/spi-generic: Append unit to macro namesUwe Poeche
This patch appends a unit (milliseconds) to time-out macro names for better understanding the code which is using the macros. Change-Id: Ibc4beda2660a83fd5f0ed325b2ee3148c6d96639 Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34384 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-23sb/intel/common/spi: Increase flash erase timeoutUwe Poeche
This patch provides an increased timeout (60ms -> 1s) for SPI HW-sequencing flash erase operations. Without that the erase for MRC cache writing on siemens/mc_bdx1 sometimes goes wrong because the timeout stops waiting for flash cycle completion. It was found during continuous integration. Investigation showed that the used flash type takes sporadic (e.g. 5% of the test cycles) more time for completion of erasing operation if the ambient temperature increases. The measured time values are in range of data sheet of SPI flash. 60ms is a typical value. So increasing the value is necessary. tested on siemens/bdx1; measured time values with increased ambient temperature of flash were always smaller than worst case value of 1s. Change-Id: Id50636f9ed834ffd7810946798b300e58b2c14d2 Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-23include/spi-generic: move common flash timeoutsUwe Poeche
This patch moves SPI_FLASH time-outs from spi/spi_flash_internal.h for SPI SW-sequencing to include/spi-generic.h to provide also for SPI HW-sequencing. tested on siemens/bdx1 and checked if all includes of spi_flash_internal.h on other places provide an include of spi-generic.h before Change-Id: I837f1a027b836996bc42389bdf7dbab7f0e9db09 Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-23mb/google/octopus/variants/fleex: Remove gpio NC setting for enabling I2C0Frank Wu
Enable I2C0 in fleex then verify EMR function successfully BUG=b:135968368 BRANCH=octopus TEST=EMR function working normally with I2C0 in Grob360S. Change-Id: I784ff32418bc839bcec14fbfd7236f708828690e Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-07-23vboot: relocate call to vboot_save_recovery_reason_vbnvJoel Kitching
Relocate call to vboot_save_recovery_reason_vbnv and rename vb2_clear_recovery_reason_vbnv for consistency. BUG=b:124141368, b:124192753 TEST=make clean && make test-abuild BRANCH=none Change-Id: I111cc23cf3d4b16fdb058dd395ac17a97f23a53f Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-23vboot: deprecate vboot_handoff structureJoel Kitching
vboot_handoff is no longer used in coreboot, and is not needed in CBMEM or cbtable. BUG=b:124141368, b:124192753 TEST=make clean && make runtests BRANCH=none Change-Id: I782d53f969dc9ae2775e3060371d06e7bf8e1af6 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33536 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-23util/*/Makefile: Rename -W to -WextraJacob Garber
-W is the old name for -Wextra, so let's rename it to be consistent with the rest of the utility Makefiles. Change-Id: I0e50f13d2617b785d343707fc895516574164562 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34455 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-23libpayload/libc: Use size_t for lengths and indicesJacob Garber
size_t is the natural integer type for strlen() and array indices, and this fixes several integer conversion and sign comparison warnings. Change-Id: I5658b19f990de4596a602b36d9533b1ca96ad947 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33794 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-23libpayload/libc: Tidy utf16le_to_asciiJacob Garber
- Constify the string argument - Change int to size_t, which is what xmalloc expects Change-Id: I8b5a13319ded4025f883760f2b6d4d7a9ad9fb8b Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-23libpayload/libc: Correct strlcat return valueJacob Garber
The documented return value for strlcat is horribly wrong, as is the return value itself. It should not return the number of appended bytes, but rather the length of the concatenated string. From the man page: The strlcpy() and strlcat() functions return the total length of the string they tried to create. For strlcpy() that means the length of src. For strlcat() that means the initial length of dst plus the length of src. While this may seem somewhat confusing, it was done to make truncation detection simple. This change is more likely to fix existing code than break it, since anyone who uses the return value of strlcat will almost certainly rely on the standard behaviour rather than investigate coreboot's source code to see that we have a quirky version. Change-Id: I4421305af85bce88d12d6fdc2eea6807ccdcf449 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-23src/lib/hexdump: Use size_t for indicesElyes HAOUAS
Spotted out using -Wconversion gcc warning option. Change-Id: I29a7ae8c499bb1e8ab7c8741b2dfb7663d82a362 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
2019-07-23mb/google/hatch: Add FP MCU to helios device treePhilip Chen
BUG=b:136606255 Change-Id: I8fa29dc96e7a066f6708ede6b7bee2382c7008cb Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-23mediatek/mt8183: Add md power-off flowYanjie Jiang
SRCCLKENA holds 26M clock, which will fail suspend/resume, and the SRCCLKENA is not used by mt8183, so we can simply release it for suspend/resume to work. BUG=b:80501386 BRANCH=none Test=Boots correctly on Kukui, suspend test pass. Change-Id: Ib6e11faeb6936a1dd6bbe8b1a8b612446bf51082 Signed-off-by: Yanjie.jiang <yanjie.jiang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32666 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-22Documentation: Add 4.10/4.11 release notesPatrick Georgi
For 4.11 that's obviously just the release notes template. Change-Id: I44c15bcaedf1367d745c533cc0a4acebdd2f812e Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-07-22soc/mediatek/mt8183: Support SSPMErin Lo
SSPM is "Secure System Power Manager" that provides power control in secure domain. The initialization flow is to load SSPM firmware to its SRAM space and then enable. BUG=b:80501386 BRANCH=none Test=Build pass Change-Id: I4ae6034454326f5115cd3948819adc448b67fb1c Signed-off-by: Erin Lo <erin.lo@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31516 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-22soc/intel/broadwell: Change variable back to u32Jacob Garber
commit bde6d309df (x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointer) accidentally changed the type of reg32 to a u8 *, so change it back to a u32. Change-Id: If6beff17ed3ddf85889aba5f41d1ba112cd74075 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1402160 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-21mediatek/mt8183: support more EMCP LPDDR4X DDR bootupHuayang Duan
Support SANDISK SDADA4CR-128G, SAMSUNG KMDP6001DA-B425, KMDV6001DA-B620 EMCP LPDDR4X DDR bootup. BUG=b:80501386 BRANCH=none TEST=Boots correctly on EMCP DRAM Change-Id: I7de4c9a27282d3d00f51adf46dcb3d2f3984bfff Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-07-21mb/google/kukui: Introduce a new 'Jacuzzi' familyHung-Te Lin
The 'Jacuzzi' is a different base board that will share most of Kukui design. For AP firmware, there will be only a few changes expected, mostly in display (for MIPI bridge) and EC/keyboard so we want to create it as variants inside Kukui folder, not forking a new directory. BUG=b:137517228 TEST=make menuconfig; select 'krane' and build; select 'jacuzzi' and build. Change-Id: Ic2b04e01628dc3db40f79f9bbdd5cc77d9466753 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34344 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-21mediatek/mt8183: Calibrate RTC eosc clockRan Bi
Calibrate RTC eosc clock which will be used when RTC goes into low power state. BUG=b:133872611 BRANCH=none TEST=Boots correctly on Kukui Change-Id: Ie8fd6f4cffdcf7cf410ce48343378a017923789c Signed-off-by: Ran Bi <ran.bi@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-07-21src/cpu/intel: Add sanity check for cpu turbo mode capabilityJohn Zhao
It is proper to check cpu turbo mode capability after it is selected to be enabled. If processor exhibits the presence of hardware support for turbo, turbo global state will be updated with TURBO_ENABLE. Otherwise, TURBO_UNAVAILABLE is applied to turbo global state. TEST=Validated turbo state on GLK and WHL devices. Change-Id: Ib1bc37fb339b4a0bb6a7cdc6cd4391575b22b55a Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34145 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-21MAINTAINERS: Add Portwell M107 maintainersFrans Hendriks
Add maintainers to Portwell PQ-M107 boards. BUG=N/A TEST=N/A Change-Id: I9171a9dd56bba7cc4836a7d2c2e314b910229cb9 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34445 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-07-21soc/intel: Expand SA_DEV_ROOT for ramstageKyösti Mälkki
We do not want to disguise somewhat complex function calls as simple macros. Change-Id: I298f7f9a1c6a64cfba454e919eeaedc7bb2d4801 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-21soc/intel: Change file to __SIMPLE_DEVICE__Kyösti Mälkki
All the PCI accesses in the file are now accessed without SA_DEV_ROOT expanding to function call. Change-Id: I30d331e9c18a486ea971e8397a6e20a0f82d5f84 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-21soc/intel: Fix chip_info for PCH_DEV_PMCKyösti Mälkki
Since PCH_DEVFN_PMC device is a PCI device that may be hidden from enumeration, use SA_DEVFN_ROOT instead to locate the SOC configuration. Change-Id: I4b5195827fb32ec1dbd0bd6c9e243f4f9a4775ca Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34327 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-21util/cbfstool/flashmap: Fix memory leaks on failureJacob Garber
Fix several memory leaks on failed printing or tests. These don't matter much, but it keeps Coverity happy. Change-Id: Ie750acb50ae1590c3aea533338a8827c03459c1a Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 130245{1,2,3} Reviewed-on: https://review.coreboot.org/c/coreboot/+/34412 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-21mb/google/hatch: Remove hatch_whlPhilip Chen
Hatch_whl variant is deprecated. BUG=b:137180390 Change-Id: I88fa201398ad5fb70da48d022f1ae86fecafa660 Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34432 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-21mainboard/google/kahlee: create treeya variantChris Wang
This is based on the grunt variant. BUG=b:135551210 BRANCH=none TEST=emerge-grunt coreboot chromeos-bootimage Ensure that image-treeya.*.bin are created Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I40f3c9de87350777b02dd91d8c5b9dbe2eb9f6b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34435 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-21soc/intel/common: gpio_defs: set trig to disable in PAD_CFG_GPO*Maxim Polyakov
According to the documentation [1], by default the RX Level/Edge Trig Configuration set to disable (2h = Drive '0') for each pad. Since this setting doesn't matter for the GPO pad, there is no need to change the default value for such pads. The patch updates PAD_CFG_GPO* macros to set trig to disable. It also resolves some problems of creating the PCH/SoC pads configuration based on information from the inteltool dump [2,3] [1] page 1429,Intel (R) 100 Series and Intel (R) C230 Series PCH Family Platform Controller Hub (PCH), Datasheet, Vol 2 of 2, February 2019, Document Number: 332691-003EN https://www.intel.com/content/dam/www/public/us/en/documents/ datasheets/100-series-chipset-datasheet-vol-2.pdf [2] https://review.coreboot.org/c/coreboot/+/34337 [3] https://github.com/maxpoliak/pch-pads-parser/issues/1 Change-Id: I39ba83ffaad57656f31147fc72d7a708e5f61163 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-21soc/intel/common: add PAD_CFG_NF_BUF_TRIG macroMaxim Polyakov
In the case there is no the circuit diagram for motherboard, the PCH/SoC GPIOs config is based on information from the inteltool dump. However, available macros from gpio_defs.h can't define the pad configuration from this dump: 0x0440: 0x0000002084000500 GPP_A8 CLKRUN# 0x0448: 0x0000102184000600 GPP_A9 CLKOUT_LPC0 0x0450: 0x0000102284000600 GPP_A10 CLKOUT_LPC1 To convert these raw DW0/DW1 register values to macros, the following parameters must be set: func - pad function, pull - termination, rst - pad reset config, trig - rx level/edge configuration, bufdis - rx/tx (in/output) buffer disable. The patch resolves the above problem by adding a new macro for the native function configuration: PAD_CFG_NF_BUF_TRIG(pad, pull, rst, func, bufdis, trig) These changes were tested on Asrock H110M-DVS motherboard [2]. It also resolves the problem of automatically creating pads configuration [3,4] [1] page 1429,Intel (R) 100 Series and Intel (R) C230 Series PCH Family Platform Controller Hub (PCH), Datasheet, Vol 2 of 2, February 2019, Document Number: 332691-003EN https://www.intel.com/content/dam/www/public/us/en/documents/ datasheets/100-series-chipset-datasheet-vol-2.pdf [2] https://review.coreboot.org/c/coreboot/+/33565 [3] https://github.com/maxpoliak/pch-pads-parser/issues/1 [4] https://github.com/maxpoliak/pch-pads-parser/commit/215d303 Change-Id: If9fe50ff9a680633db6228564345200c0e1ee3ea Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34337 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-21mb/google/hatch/var/kindred: Implement variant_devtree_update()David Wu
This change provides an implementation of variant_devtree_update() for kindred that disable eMMC controller when SKU ID = 1 or 3 BUG=b:132918661 TEST=Verify eMMC is disabled when SKU ID = 1 or 3 Change-Id: I8ccb4dae54f223881e0ced9e034bf45b994cc6f2 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-07-21mb/google/hatch: expose get_board_sku() as globalDavid Wu
BUG=None TEST=emerge-hatch coreboot chromeos-bootimage Change-Id: I217e13acd337034554ff055e8bf5011558d1f8bf Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-21mb/google/hatch: Add support for variant_devtree_update()David Wu
This change adds support for variant_devtree_update() that allows variant to update device tree. BUG=None TEST=emerge-hatch coreboot chromeos-bootimage Change-Id: I0e9ad360b6c02c83fe49387ce7bc66d56448ffb9 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34399 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-21mb/google/eve: Enable wake from MKBP events in S3Aseda Aboagye
We would like to wake eve up in suspend from an MKBP event. This commit simply enables MKBP events to wake the system in suspend using the existing host event interface. There is an accompanying series of patches in the EC firmware for eve that will allow a MKBP wake mask to be configured. BUG=chromium:786721 BRANCH=firmware-eve-9584.B TEST=Build and flash eve, generate MKBP events on the EC and verify that the system wakes up in suspend. Change-Id: I75b05c83a4204d55df11589299a7488d04bbd073 Signed-off-by: Aseda Aboagye <aaboagye@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34454 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-21soc/intel/skylake: Enable Energy/Performance Bias controlMatthew Garrett
Bit 18 of MSR_POWER_CTL is documented as reserved, but we're setting it on Haswell in order to enable EPB. It seems to work on SKL/KBL as well, so do it there too. Signed-off-by: Matthew Garrett <mjg59@google.com> Change-Id: I83da1a57a04dac206cc67f2c256d0c102965abc2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34458 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-21soc/amd/picasso: Remove dead SPD size Kconfig symbolMarshall Dawson
DIMM_SPD_SIZE is no longer used and should have been removed in 78025f6 "soc/amd/picasso: Remove all AGESA references". Change-Id: Iae15998835e4d8afdb44cca77d2c9009b7e3947a Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-21soc/amd/picasso: Enable stage cache only with ACPI resumeMarshall Dawson
Make the option match the change in I7c3b3ec. "stoneyridge/Kconfig: Enable stage cache based on HAVE_ACPI_RESUME" Change-Id: I7fa13428ec0119b61f429116a52986067e833bdf Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34418 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-21pci_ids: Add AMD Family 17h host bridgeMarshall Dawson
Add the ID for Picasso's D0F0. Change-Id: Id83dfecd628a6ee67bf61e390569da6cfc455a7d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34417 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-21nb/amd/trinity: Rename PCI ID of the IOMMUMarshall Dawson
Make the Trinity IOMMU ID naming consistent with other products. Change-Id: Id5a03d44a2ca21061bb22f9e61b26e42d91f9d96 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-07-21pci_ids: Reorder AMD internal northbridge and IOMMU IDsMarshall Dawson
Put the devices in Family/Model order instead of a mostly chronological order. Change-Id: I425736012b3bb68c9e0b417e90ff5261d1193aba Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-21soc/amd: Move SPI base alignment define into commonMarshall Dawson
The decision to leave the alignment in stoneyridge was driven because of a spec difference with picasso. AMD has checked the design materials and has confirmed there was no change. TEST=Build Grunt successfully BUG=b:130343127 Change-Id: If3a1d5a41dc175c9733fd09ad28627962646daf9 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34414 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-21libpayload: Enable -Wimplicit-fallthroughJacob Garber
Add comments to intentional fall throughs and enable the warning. Change-Id: I93e071c4fb139fa6e9cd8a1bfb5800f5f4eac50b Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-20mb/,sb/intel/i82801gx: Merge `ide_legacy_combined` into `sata_mode`Nico Huber
Functional changes were already done in 5eb81bed2e (sb/intel/i82801gx: Detect if the southbridge supports AHCI) but we forgot to update the `chip.h` and devicetrees. Change-Id: I0e25f54ead8f5bbc6041d31347038e800787b624 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34462 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-19mb/getac/p470: Null-terminate ec_id string bufferJacob Garber
The EC ID of the ECDT needs to be null-terminated (see ACPI specification, section 5.2.15), which currently isn't being done due to an off-by-one error. strncpy() is bug-prone exactly because of issues like this, so just skip it entirely and use memcpy() instead. Change-Id: I0b62e1f32177c9768fa978053ab26bca93d7248d Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1402104 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-19device/device_util.c: Correct format specifierJacob Garber
path.mmio.addr is a uintptr_t, which is an unsigned long. Change-Id: I5e43e0ab65cf59819abe1dde43143ff98e4553b0 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1402110 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34370 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-19mb/google/octopus: Disable unused USB devicesKarthikeyan Ramasubramanian
Disable unused USB devices in the device tree so that the concerned ACPI objects do not get exported to the OS. BUG=b:133513961 BRANCH=octopus TEST=Boot to ChromeOS. Ensure that the USB devices are disabled based on port status and the concerned ACPI objects are not exported. Change-Id: I0faccdfb8a9df9ec52130437433b15973e3d6f1a Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-19mb/google/octopus: Add ACPI configuration for USB devicesKarthikeyan Ramasubramanian
Add devicetree configuration for USB devices so that USB Port Capabilities (_UPC) and Physical Location of Device (_PLD) ACPI objects can be exported to the OS. BUG=b:133513961 BRANCH=octopus TEST=Boot to ChromeOS. Ensure that the _UPC & _PLD ACPI objects are exported for the configured USB devices in the SSDT table. Change-Id: I832ffe305d256296b7447035c5e5dcafb7c296d9 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-19soc/intel/common/block/xhci: Add API to disable USB devicesKarthikeyan Ramasubramanian
Add API to disable USB devices that are not present but are configured in the device tree either after probing the concerned port status or as explicitly configured by the variants. BUG=None BRANCH=octopus TEST=Boot to ChromeOS. Change-Id: Ied12faabee1b8c096f2b27de89ab42ee8be5d94d Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33377 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-19soc/intel/common: Add SOC specific function to get XHCI USB infoKarthikeyan Ramasubramanian
It feels appropriate to define SoC specific XHCI USB info in SoC specific XHCI source file and an API to get that information instead of defining it in elog source file. This will help in other situations where the information is required. BUG=None BRANCH=None TEST=Boot to ChromeOS. Change-Id: Ie63a29a7096bfcaab87baaae947b786ab2345ed1 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34290 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-19device/oprom: List all supported vesa mode by opromSubrata Banik
This patch lists all supported vesa mode by oprom using Function 0x4F00 (return vbe controller information). This information might be useful for user to select correct vesa mode for oprom. TEST=Enabling external pcie based graphics card on ICLRVP Case 1: with unsupported vesa mode 0x118 Now coreboot will show below msg to user to know there is a potential issue with choosen vesa mode and better users know the failure rather going to depthcharge and debug further. Calling Option ROM... ... Option ROM returned. VBE: Getting information about VESA mode 4118 VBE: Function call invalid with unsupported video mode 0x118! User to select mode from below list - Supported Video Mode list for OpRom are: 0x110 0x111 0x113 0x114 0x116 0x117 0x119 0x11a 0x165 0x166 0x121 0x122 0x123 0x124 0x145 0x146 0x175 0x176 0x1d2 0x1d4 Error: In vbe_get_mode_info function Case 2: with supported vesa mode 0x116 Calling Option ROM... ... Option ROM returned. VBE: Getting information about VESA mode 4116 VBE: resolution: 1024x768@16 VBE: framebuffer: a0000000 VBE: Setting VESA mode 4116 VGA Option ROM was run Change-Id: I02cba44374bc50ec3ec2819c97b6f5027c58387f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34284 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-19drivers/i2c/dw: Don't try to generate unselected speeds in ACPI tableTim Wawrzynczak
When generating entries in SSDT for DesignWare I2C controllers, only use the speed selected in the devicetree, instead of trying all of them. This quiets a message which looks like a bug ("dw_i2c: bad counts"), later on in this driver when checking rise/fall times. BUG=b:137298661 BRANCH=none TEST=Boot and verify that I2C controllers still function, and the nastygram message is gone. Change-Id: I07207ec95652e8af1a42bfe31214f61a183a134e Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34385 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-19google/nocturne: Add MKBP events as a wake sourceAseda Aboagye
We would like to wake nocturne up in suspend from an MKBP event. On Nocturne, MKBP events are notified to the host via a GPIO from the EC, EC_INT_L. However, the AP cannot wake from suspend from this GPIO. Therefore, we'll use the host event interface to wake the system instead. This commit simply enables MKBP events to wake the system in suspend. BUG=chromium:786721 BRANCH=firmware-nocturne-10984.B TEST=Build and flash nocturne, generate MKBP events on the EC and verify that the system wakes up in suspend. Change-Id: I6aff4d38051c939257533229fd0085e42c01d02f Signed-off-by: Aseda Aboagye <aaboagye@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34388 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2019-07-19MAINTAINERS: Add arbitration board members for the code of conductPatrick Georgi
Since they're in charge of enforcing it, they should also get to see when somebody attempts to change it. Change-Id: I8c12dd0c27f7c3661e9755a5181db08563c8561f Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-07-19Documentation/code_of_conduct: Update arbitration teamPatrick Georgi
Marc found more interesting things to do (yay, Marc!) and Martin offered to volunteer on the arbitration board in his place. Change-Id: Ic5bf00735afdf8942e543043238890011a82c890 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-07-19Documentation/code_of_conduct: Emphasize definition of community org.Patrick Georgi
The paragraph starts talking about community organizers. By making their definition a separate paragraph it's hopefully easier to find what this means. Change-Id: Icb9abbbd05b59bd4ee741d10f4c9c1a8c321b430 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-07-19Documentation/code_of_conduct: Highlight the reporting processPatrick Georgi
Make it a separate section, emphasize that people should get support early, note that personal interaction and email are the two best ways to seek help. Change-Id: I8cb613fefe1a7b4db1ee948fb9927a38f0421011 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-19sb/intel/{bd82x6x|ibexpeak}: Drop p_cnt_throttling_supportedPatrick Rudolph
The processor P_BLK doesn't support throttling. This behaviour could be emulated with SMM, but instead just update the FADT to indicate no support for legacy I/O based throttling using P_CNT. We have _PTC defined in SSDT, which should be used in favour of P_CNT by ACPI aware OS, so this change has no effect on modern OS. Drop all occurences of p_cnt_throttling_supported and update autoport to not generate it any more. Change-Id: Iaf82518d5114d6de7cef01dca2d3087eea8ff927 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-19Documentation: Add Intel TXTPatrick Rudolph
Change-Id: I9e9606d0e4294ad3552ec3b3b44629f9e732d82b Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-07-19Documentation/code_of_conduct: Assume the best as long as you canPatrick Georgi
"Always assume" is rather final and (in some readings) invalidates the need for the rest of the text. Change-Id: Ibf6f776494367d012ce69a64fa928c1dd4206c0e Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-07-19device/pci_rom.c: Fix out of bounds readJacob Garber
run_rom->data is a uint16_t, so use the appropriate read function. Change-Id: Icc14421412885495df90c90ed7da6e7d2eba4182 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1402145 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34372 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-19sb/amd/sb800: Remove bit shift that does nothingJacob Garber
This bit shift attempts to set bits 8 and 9 of the byte variable (counting from 0). However, as the name suggests, this variable is only 8 bits wide, so the shift does nothing. Reading section 7.5 of the AMD SB800-Series Southbridges Register Programming Requirements manual, bits 8 and 9 are already set by default, so we can remove the bit shift. (Alternatively, we could try setting the corresponding bits one byte higher in 0xF1 if needed.) Change-Id: I645236441e02925ee01339378d213cb343027363 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1229582 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-07-19nb/via/vx900: Ensure framebuffer size is within limitsJacob Garber
- Use log2() when rounding down size_mb to the closest power of 2. Do a sanity check beforehand that size_mb is nonzero, else log2() will return -1 and there will be an undefined integer shift. - The framebuffer size needs to be between 8 and 512 MiB, so check after all the calculations are done to make sure this is the case. Change-Id: I3962e5cdc094c8da22d8dbadf16637e02fa98689 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1391086 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-19Makefile.inc: Enable -Wimplicit-fallthroughJacob Garber
Change-Id: Ic81ed9eb2ed5255a221082326b81c375456a6499 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34300 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-19src: Make implicit fall throughs explicitJacob Garber
Implicit fall throughs are a perpetual source of bugs and Coverity Scan issues, so let's squash them once and for all. GCC can flag implicit fall throughs using the -Wimplicit-fallthrough warning, and this should ensure no more enter the code base. However, many fall throughs are intentional, and we can use the following comment style to have GCC suppress the warning. switch (x) { case 1: y += 1; /* fall through */ case 2: y += 2; /* fall through - but this time with an explanation */ default: y += 3; } This patch adds comments for all remaining intentional fall throughs, and tweaks some existing fall through comments to fit the syntax that GCC expects. Change-Id: I1d75637a434a955a58d166ad203e49620d7395ed Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34297 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-19nb/intel/pineview: Remove dead code in switchJacob Garber
This switch was likely copy-pasted from the one right above it. However, the MEM_CLOCK_800MHz case isn't needed, since that is explicitly checked and avoided before the while loop. With that gone, only the 667MHz/default case is left, which we don't need to switch over anymore. Change-Id: Idfb9cc27dd8718f627d15ba92a9c74c51c2c1c2d Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1347372 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33407 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-19security/tpm/tss/tcg-2.0: Add TPM2 function tlcl_getcapability()Frans Hendriks
Add function tlcl_getcapability() to return TPM2 capability. To support TPM2 capability TPM_CAP_PCRS handling is added to unmarshal_get_capability(). BUG=N/A TEST=Build binary and verified logging on Facebook FBG-1701 Change-Id: I85e1bd2822aa6e7fd95ff2b9faa25cf183e6de37 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-19payloads/GRUB: Use correct script name in MakefileGompa
Fixes: 3555389a8c (payloads: Update GRUB stable from 2.02 to 2.04) Change-Id: I2f95059453ca5565a38550b147590ece4d8bf5ad Signed-off-by: Gompa <gompa@h-bomb.nl> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-07-19mb/google/hatch: Fix SD card is detected as read only issueSubrata Banik
This patch configures GPIO pin GPP_G7 as NF1 with internal pull down. As per schematics SD host controller SD_WP pin is not connected to uSD card connector. Configured gpio pin as NF1 with internal pull down in order to overcome gpio default state in hatch which makes SoC SD_WP pin is enable. BUG=b:137729527 BRANCH=None TEST=Able to write/read data to/from sd card after mounting card device. Change-Id: I0187267670e1dea3e1d5e83d0b29967714d6065e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34396 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-19mb/google/helios: Add ALC1011 in device tree to enable speaker ampsSathya Prakash M R
Following changes are done to enable ALC1011 codec on Helios 1. ACL1011 4 devices to I2C4 2. GPIO H13 is set to GPO as per schematics Verified SSDT table and i2cdetect from kernel. Signed-off-by: Naveen Manohar <naveen.m@intel.com> Change-Id: I0d71e3bd2d4493d059a33023c1afe1b630181d4f Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33932 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-18ec/google/chromeec: Pass reference of object to BBST() methodDuncan Laurie
The BBST() method writes an updated status flag mask that is intended to be stored back in the battery object. This value needs to be passed as a reference to an object to prevent it from being evaluated at the time the method is loaded or it will not actually update the BSTP value in the battery device. This was tested by instrumenting the _BST method in the primary battery and ensuring the value can be updated by the BBST method. Change-Id: Ia8e207a2990059a60d96d8e0f3ed3c16a55c50f4 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-18vendorcode/amd/pi: Integrate Merlin Falcon as a build optionRichard Spiegel
Add changes needed to build a project using Merlin Falcon SOC using 00670F00 vendor code, which is backward compatible with Merlin Falcon. Only the AGESA binary image is different then the one used by 00670F00. BUG=none. TEST=Tested later with padmelon board. Change-Id: Id3341f6a1ef2561a6391d3db8c54f6bdd09b0c0e Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33622 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-18device/oprom/realmode: Add vbe return status support as per VBE spec 3.0Subrata Banik
Existing coreboot oprom implementation relies on user selected vesa mode through CONFIG_FRAMEBUFFER_VESA_MODE Kconfig option and expects that all oprom might support user selected vesa mode. Take an example: Enabling AMD external radeon PCIE graphics card on ICLRVP with default vesa mode 0x118. Unable to get valid X and Y resolution after executing vbe_get_mode_info() with 0x4118, return data buffer shows 0x0 resolution. It causes further hang while trying to draw bmpblk image at depthcharge. This patch checks for output register AH in all vbe function (0x3 and 0x4f00/1/2) and die() if returns error. Change-Id: Iacd2ce468e038a14424f029df3a0adec3e5fa15c Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33737 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-07-18soc/intel: Use config_of()Kyösti Mälkki
Change-Id: I0727a6b327410197cf32f598d1312737744386b3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: David Guckian
2019-07-18soc/intel: Fix invalid use of 'static'Kyösti Mälkki
Just keep the variables on the stack. Change-Id: I36b29d8fb7dac159b29609033cba450bea9adf77 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-18soc/intel: Use config_of_path(SA_DEVFN_ROOT)Kyösti Mälkki
We do not want to disguise somewhat complex function calls as simple macros. Change-Id: I53324603c9ece1334c6e09d51338084166f7a585 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34299 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Guckian Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-18devicetree: Add accessors for chip_infoKyösti Mälkki
Apply uniform style of error messages for missing device nodes and chip_info. Change-Id: I70def4599509b8193e44ea3f02c4906f865b4469 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-18mb/google/hatch/var/helios: Implement variant_memory_sku()Furquan Shaikh
This change provides an implementation of variant_memory_sku() for helios that overrides memory ID 3 and 4 to 0 and 1 to workaround the incorrect memory straps in hardware for board id 0 and unknown. BUG=b:133455595 Change-Id: I38fab1f91decac5d0a146e5a6c74e88f677af305 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34252 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-07-18mb/google/hatch: Add support for variant_memory_sku()Furquan Shaikh
This change adds support for variant_memory_sku() that allows variant to return memory SKU ID. Current implementation of memory_sku() is renamed to weak implementation of variant_memory_sku(). Functionally this change should be the same as before for all hatch variants. This function will be overriden by helios in a follow-up CL. BUG=b:133455595 Change-Id: I509c263ec08e0060c12ef1ea9fed673f1e3f3a41 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-07-18nb/intel/sandybridge/acpi: Don't use defines for memory rangesPatrick Rudolph
Read the northbridge BARs from device PCI0:0.0. Untested. Change-Id: I27bfb5721d9ae3dc5629942ebac29b12a7308441 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-07-18mb/*/*/gpio: Use static for const structuresPeter Lemenkov
Autoport generates these structures as static so let's make it consistent. See also commit 128205fd with Change-Id I83382d38a4a3b7ed11b8e7077cc5fbe154e261a7 ("autoport/bd82x6x.go: Improve gpio.c generation"). Change-Id: I4e07bd755ca4a65b76c69625d235a879fe7b43cb Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33524 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-18mb/google/hatch: Add FP MCU to kohaku device treeShelley Chen
BUG=b:137654283 BRANCH=None TEST=Make sure can see FP MCU spidev in dmesg on bootup Change-Id: Iffa13f29e1abdf430e8dc4a0ee1a931a9e69168c Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34371 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-18mb/esd/atom15/gpio.c: fix whitespaceAngel Pons
Tabs, tabs, tabs... Change-Id: I65c0918957a571aaa6f49d884625af337fb2ad7c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34394 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-07-18nb/i945/gma: Store vga_disable if MAINBOARD_DO_NATIVE_VGA_INITElyes HAOUAS
Here, vga_disable stored but we read it only if MAINBOARD_DO_NATIVE_VGA_INIT. Found-by: scan-build 7.0.1-8 Change-Id: I5c359df71568b56f48eca9615c6265da33d4a073 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34331 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-18mb/siemens/{mc_apl1,...,mc_apl5}: Fix GPIO settingsMario Scheithauer
Correct all GPIOs with reference to the Apollo Lake SoC EDS Vol 4 revision 2.4 chapter 10.1.2.3 List of Pins that are GPIOs but cannot be used in Function 0 (GPIO) mode. In additional, set an internal pull to any GPI that does not have an external resistor so that the input is not in an undefined state. Change-Id: Ia8fe457eddbed0f4ee6bff9ef9dd7a92545be40b Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34379 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
2019-07-18mb/siemens/mc_apl1: Disable all UHS-I SD-Card speed modesMario Scheithauer
The limitation for SD-Card was originally only made for mc_apl2 mainboard. Since other mc_apl mainboards also use the SD-Card interface, the speed mode setting is made in the parent mainboard_final. In additional, all UHS-I bus speed modes are disabled because of a limitation for industry use cases. This means that only HS mode is permitted. Change-Id: I2f1b51f13a53c2507c52d6a169d6384b8570b3bc Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34377 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-18mb/google/hatch: Disable wireless chargingSubrata Banik
This patch makes VGPIO_3 GPIO PIN output and low independent of cnvi is connected or not. BUG=b:123062346 BRANCH=None TEST=boot up Hatch device and make sure VGPIO_3 gpio pin is driven low. Change-Id: I629b99676f56747de1b244724709e14069250097 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34376 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-18sb/intel/bd82x6x: Add and use more RCBA definesPatrick Rudolph
Taken from "Intel 6 Series Chipset and Intel C200 Series Chipset" Document Number: 324645-006 and "Intel 5 Series Chipset and Intel 3400 Series Chipset" Document Number: 322169-004 and "Intel 6 Series Chipset" Document Number: 324645-001. UPDCR was found in GNU/Linux's drivers/pci/quirks.c. DMC2 was guessed as it's close to DMC and defined for 5 series chipset. Test: Run BUILD_TIMELESS=1 and compared the coreboot.roms, no differences. Change-Id: I4fed7c38078cabd4308424c7547416e87c9e6fa7 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-17lib: Remove the BOOTBLOCK_CUSTOM compile guardAsami Doi
This CL allows that everyone can use main() in lib/bootblock.c even if you select CONFIG_BOOTBLOCK_CUSTOM. I also rename main functions used in some soc/ to avoid the collision with the main function defined at lib/bootblock.c. Change-Id: I0575c9d1ce9dea9facfcc86760dff4deee9c1e29 Signed-off-by: Asami Doi <d0iasm.pub@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34250 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-17nb/i945: Fix gate graphics hardware for frequency changeElyes HAOUAS
The GCFC (Graphics Clock Frequency Control) read is not used at the line below. As the default value is zero, let's remove unused read. Found-by: scan-build 7.0.1-8 Change-Id: I82c567e3a5b0c0c4a8596ea0cb7693667c71b720 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-17amd/stoneyridge/Kconfig: Enable stage cache based on HAVE_ACPI_RESUMESubrata Banik
This patch fixes inconsistent issue with stage cache enabling with HAVE_ACPI_RESUME config enable. Only enable stage cache if CONFIG_HAVE_ACPI_RESUME=y Change-Id: I7c3b3ec4642a615e17fb3dbdedca6af8ca95ea2b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34368 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-07-17sb/amd/sr5650: Add fine-grained bounds checkingJacob Garber
The code currently checks that 4 <= dev_index <= 10, which after subtraction by 4 can index into an array of length at most 7. This is fine for the largest cpl array (which does have length 7), but is too large for some of the others, which are smaller. This adds bounds checks for each array access to ensure they are all within bounds. Change-Id: I1610d35ca6cbb6cfb42c251e75b0e8b22b64252b Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1229676 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33458 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-17device: Move pci_irqs outside DEVTREE_EARLYKyösti Mälkki
Only needed in ramstage, and only for MP tables. Change-Id: Ia7c1e153b948aeefa4c3bea4920b02a91a417096 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33922 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-17site-local: Allow to read Makefile.inc w/o .configBalaji Manigandan B
Makefile.inc allows extending site-specific configurations. This change is to allow make utility to list supported options, irrespective of a .config file availability. Change-Id: I7c968c773c368ea74689b9741c4c978c35110187 Signed-off-by: Balaji Manigandan B <balaji.manigandan@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34024 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-17nb/intel/x4x: Die on invalid memory speedsJacob Garber
The speed argument should be one of the six values from the mem_clock enum, so something is very wrong if this is not the case. Better to die now than return 0, which will cause a division-by-zero error later on where this function is called. The first two speeds are also unsupported and have the same problem with returning 0, so die on those as well. Change-Id: Ib628c0eed3d6571bdde1df27ae213ca0691ec256 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1391088 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33409 Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-17nb/intel/nehalem: Prevent out of bounds readJacob Garber
If the decoded SPD DRAM frequency is slower than the controller minimum, then there will be an unsigned integer underflow in the following loop, which will lead to a very large out of bounds array access. Ensure this does not happen. Change-Id: Ic8ed1293adfe0866781bd638323977abd110777e Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1229675 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33383 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-17soc/rockchip/rk3288: Add fall through commentJacob Garber
Judging from the state machine on page 281 of the Rockchip RK3288 Technical Reference Manual (Rev 1.0 - Jun 2015), the fall through from the INIT_MEM -> CONF states is intentional, since that is the only way to get to the ACCESS state. Add a comment to explain this. Change-Id: I1d0cfea07211c54d6a906f5a7481c2c760f8ef0d Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1291959 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-17soc/amd/stoneyridge: Add Merlin Falcon configurationRichard Spiegel
Add config parameter for Merlin Falcon (SOC_AMD_MERLINFALCON) and modify the Makefile.inc based on this config parameter. BUG=none. TEST=Tested later with padmelon board. Change-Id: Id9f960b8f012c5a1cfd398611d6a51838493da27 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33621 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-17soc/intel/cannonlake: Add device Ids for new CFL SKUs supportLean Sheng Tan
- Add CPU, MCH & IGD IDs for new Coffeelake SKUs - Add PCH, LPC, SPI IDs for CNP-H PCH CM246 & C246 - Make some minor alignments & naming corrections to align with the rest TEST= build, boot to both Linux & windows OS on CFL H & S platforms and verified all the device Id's in serial console logs. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I343b11ea8d9c33eb189d7478511a473b145f4ab4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34157 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Boon Tiong Teo <boon.tiong.teo@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-17soc/intel: Fix regression with hidden PCI devicesKyösti Mälkki
Fix regression with commit 903b40a soc/intel: Replace uses of dev_find_slot() Platforms where FSP hides PCI devices before enumeration may halt with error message 'PCI: dev is NULL!'. The workaround here is to print an error message revealing the faulty source code function and revert to old behaviour of dev_find_slot(). Change-Id: I5eab3e7f1993b686103eaa257aacda379dc259fa Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34285 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-17mainboard/portwell/m107: Do initial mainboard commitFrans Hendriks
Initial support for Portwell PQ7-M107 (Q7) module. Code based on Intel Strago mainboard. BUG=N/A TEST=booting SeaBIOS and Linux 4.20 kernel on PQ7-M107 Change-Id: I7d3173fdcf881f894a75cd9798ba173b425d4e62 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-17intel/i82801ix: Refactor lock_smm()Kyösti Mälkki
Move the SMM lock outside the function as it is renamed. Replace conditional !PARALLEL_MP with SMM_ASEG to better reflect the use. Change-Id: I93bf0d2f711f94a5bb741bdcd92c1e0fec228684 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34302 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 01:07:14 +0000