| Age | Commit message (Collapse) | Author |
|---|
|
Near the end of DDR initialization, the system switches to the index1
configuration. Sometimes this failed and a status bit that coreboot was
waiting for was never set, hanging the system.
Instead, give the system 100ms to reach the new configuration or reboot
it, which generally fixes the issue. Also reset when training the index1
configuration fails.
BUG=chrome-os-partner:57988
BRANCH=None
TEST=The error condition now leads to a reboot of coreboot which
recovers the system, instead of hanging.
Change-Id: Icb4270369102ff7a4ce91b0677e04b4eb10f1204
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ca250d0628ea3b6b39d5131246eaba68637c5140
Original-Change-Id: Id6e8936d90e54b733ac327f8476d744b45639232
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/399681
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17106
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
1. Update write leveling value to 0x200.
When the wrdqs slave delay is changed to 0x200, the phase between the
dqs and the clock is 0 degrees. The pcb layout can make sure the tDQSS
timing is smaller than 0.25tck, so this value is useful for both higher
and lower frequencies.
2. Disable read leveling for LPDDR3.
The read leveling result is unreliable - the value is not in the middle
of the read eye. To fix this, disable read leveling and fix the read
DQSn slave delay setting for DQn to 0x080 (1/4 cycle delay of the
input signal).
BUG=None
BRANCH=None
TEST=Boot from kevin; Check by shmoo read eye and stability test, that
the updated value of 0x80 is better.
Change-Id: Ia72b601d9bf4e34ba1b0b4584b2c5c3ce9dafbd4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 37e8dfe783db3ce71aa026b4609ed0bfa16db06f
Original-Change-Id: I2a5d40c0348449b2a7c609c1db65da4ed5f1c09f
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Signed-off-by: Jeff Chen <cym@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/396598
Original-Commit-Ready: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org>
Reviewed-on: https://review.coreboot.org/17105
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
To enable DDR Dynamic Voltage and Frequency Scaling (DVFS) we need to
train alternative configurations first, so do the training and store the
values.
BUG=None
BRANCH=None
TEST=Boot from kevin
Change-Id: I944a4b297a4ed6966893aa09553da88171307a42
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 94533ff3ba21bcb0ace00bedcf0cebb89a341be2
Original-Change-Id: I4a98bc0db5553d154fedb657e35b926a92aa80c7
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/386596
Original-Commit-Ready: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17104
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Testing for "devfn < 0" on an unsigned doesn't work, and i2c_bus_to_devfn
returns an int (with -1 for "error"), so use int for devfn.
Adapt Change-Id I7d1cdb6af4140f7dc322141c0c018d8418627434 to fix more
instances.
Change-Id: I001a9b484a68e018798a65c0fae11f8df7d9f564
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1357450, #1357449
Reviewed-on: https://review.coreboot.org/17054
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Some of our RK3399 devices have panel resolutions as high as 2400x1600.
With 16bpp that barely still fit into an 8MB framebuffer, but then we
changed it to 32bpp for better image quality...
Note that this is a band-aid. Coreboot-allocated framebuffers shouldn't
be used at all on ARM64 devices, since libpayload is perfectly capable
to dynamically allocate it with the right size based on EDID-information
on this architecture. That will require some more elaborate work to be
fixed with later patches.
BRANCH=gru
BUG=chrome-os-partner:58044
TEST=Warm-reboot Kevin on the dev screen, confirm that you don't see the
lower half of the screen that overflowed our allocated framebuffer
preserved from the last boot as soon as the backlight turns on.
Change-Id: I00a63cfef35a8ee734543abbdb298344fb529283
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d2718efcacb50371624d9f6a3b586c298e8c2fec
Original-Change-Id: Ia1fa28971c65d7d0639966e715f742309245172b
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/399966
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/17108
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add the eve board files using kabylake and FSP 2.0.
BUG=chrome-os-partner:58666
TEST=build and boot on eve board
Change-Id: I7ca71fe052608d710ee65d078df7af7b55d382bc
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17177
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
Add soc core init to set up the following feature MSRs:
1. C-states
2. IO/Mwait redirection
BUG=chrome-os-partner:56922
BRANCH=None
TEST= Check C-state functioning using 'powertop'. Check 0xE2 and
0xE4 MSR to verify IO/Mwait redirection.
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: I99b66b02eb790b6b348be7c964d21ec9a6926926
Reviewed-on: https://review.coreboot.org/17168
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Dumping and behavioral analysis have shown that there are more registers
in the environment control of the IT8783E/F than documented in my data-
sheet. This adds every register that wasn't 0x00/0xff by default. The
default values are guesswork: those that looked like sensor readings
became NANA, others are taken from dumps.
Change-Id: I7e39700c9b98ed5be9f085bc8ffd848006310254
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17005
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Values are taken from an unpublished datasheet. With the exception of
the default value for register 0x55 in the environment controller space:
Looks like this was just documented wrong. The dumped value of 0x50 also
makes more sense.
Change-Id: I2bd23d30b7158b2e05fcee7c6280df82570d1401
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17004
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add new dump format to superiotool that prints each register on a
separate line. This should be more suitable for diff'ing dumps of
multiple superiotool runs.
Change-Id: I226ee82b903bf77e760d3396d02fa50688adb9f2
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17003
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I61c2191f28b6c2c9a6bc587dc3b6c2ae28205192
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17124
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
All current implementations of ramstage_cache_invalid() were just
resetting the system based on the RESET_ON_INVALID_RAMSTAGE_CACHE
Kconfig option. Move that behavior to a single implementation
within prog_loaders.c which removes duplication.
Change-Id: I67aae73f9e1305732f90d947fe57c5aaf66ada9e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17184
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Ron reported some toolchain emitting .sdata sections. Let's ensure
we catch objects in those sections instead of getting dropped on the
floor for architectures which emit those sections.
Change-Id: I0680228f8424f99611914ef5fc31adf5d3891eee
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17180
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
`libgfxinit` is a SPARK library for graphics modesetting. It supports
Intel integrated graphics only, strictly speaking, the Core i processor
line.
Change-Id: Idf4b0e5fbf37a5d974075b2e44d1fa16dc428da3
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16949
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
`libhwbase` is a SPARK library that contains some basic support for i/o
access, debugging, timers. Just what I put around `libgfxinit`, to make
it build standalone.
Change-Id: I1918680c14696215522e1c5dae072235bb4e71a3
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16948
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I81c6f628f239223ba293a1196f70e4f26e022f6c
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16950
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Ada usually does lots of type and contract checking during runtime. As
this produces overhead and there is nobody to tell when we run into an
exception, we disable code generation for those checks. Now disable it
for `Refined_Post` too, which was just missed earlier.
Change-Id: I67ca754f830e387efee3930e86929eb494bfaf03
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16945
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Ada knows a pragma `Debug` that is used to exclude procedure calls from
a release build. The new option `DEBUG_ADA_CODE` enables those procedure
calls.
Change-Id: Id5298e5819606c3d1cf2a2a1cd4f1d5d1227aa4f
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16943
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
These settings should be always made by the firmware, no matter if we
set up graphics or not. It looks like Linux doesn't even know these
registers.
The values are taken from the PRMs for Sandy Bridge and Ivy Bridge [1,
2]. They match the settings that were done in the native graphics path
for Ivy Bridge. I expect the differences to be an update (i.e. the set-
tings we did on the Sandy Bridge path were just outdated). Also, these
settings affect the PCH and not the CPU which are independent from each
other.
[1] Intel® OpenSource HD Graphics Programmer’s Reference Manual (PRM)
Volume 3 Part 3: PCH Display Registers (SandyBridge)
Doc Ref #: IHD-OS-V3 Pt3 – 05 11
https://01.org/sites/default/files/documentation/snb_ihd_os_vol3_part3.pdf
[2] Intel ® OpenSource HD Graphics Programmer’s Reference Manual (PRM)
Volume 3 Part 4: South Display Engine Registers (Ivy Bridge)
Doc Ref #: IHD-OS-V3 Pt 4 – 05 12
https://01.org/sites/default/files/documentation/ivb_ihd_os_vol3_part4.pdf
Change-Id: I83cc90c7558b93273a727f332fb0d8ced47ed70e
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/17073
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Update to Chromium TOT with ea1a8699e96425806abdd532d04da254ae093f6e
Change-Id: I28b9f415a4d55442c294abd27c344a91608a06c0
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17185
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
ramstage_cache_invalid which was added in
I83fe76957c061f20e9afb308e55923806fda4f93 (review.coreboot.org/#/c/17112)
requires hard_reset to be defined in postcar stage.
BUG=None
BRANCH=None
TEST=Compiles successfully for reef.
Change-Id: I283277c373259e0e2dfe72e3c889ceea012544f2
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17182
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This document provides information about the different functions that a
driver can use for generating ACPI code for toggling GPIO. These
functions are expected to be implemented by the SoC. It also defines the
different constraints on use of Local variables in ACPI code while
implementing these functions.
BUG=chrome-os-partner:55988
Change-Id: Ibc03d766afb6d7b75bc0dc9f79920b561f1c4a78
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17128
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ic01565cb730c49a5fe77c8f4990276970964f101
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/17174
Tested-by: build bot (Jenkins)
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This was tested at the coreboot meeting in Berlin.
The uart programming may still not be right but when used with
the lowrisc bitstream for the board we were able to load
and start linux, although it does not yet get far due to
PTE version issues with lowrisc.
Change-Id: Ia1de1a92762631c9d7bb3d41b04f95296144caa3
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/17132
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This patch updates the _ART table with other external sensor
TSR0 for Fan speed control on Skylake-U based Kunimitsu and
Lars boards.
Also, updates the temperature values in DPTF policy for
better performance.
BUG=chrome-os-partner:51025
BRANCH=firmware-glados-7820.B
TEST=Built and booted on kunimitsu and lars EVT boards.
Verified this updated _ART table on these boards with
different workloads.
Change-Id: Ib195910c5eb00e004e8b9bd50e266ade3c175be2
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://chromium-review.googlesource.com/332349
Reviewed-on: https://review.coreboot.org/17066
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Some distribution compilers enable Position Independent Executable (PIE)
by default, causing a build failure.
So explicitly disable PIE by passing the flag `-fno-pie`, to fix the
build error.
Change-Id: I1b7d7168e34c5c93c25bc03ffa49b2eeac0e76f8
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/17097
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I07fd4d6f6db220e23da8daced6014ce39894c604
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/17159
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In certain cases a board variant may need to override the NHLT
OEM strings in the main NHLT table. Therefore, provide that path.
BUG=chrome-os-partner:56918
Change-Id: I57cc4fd3665698e41ceebb1949180f86bb60b61f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17167
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
|
|
Going forward GPIO_17 is used to determine the configuration of
the board w.r.t. the number of DMICs on the board.
BUG=chrome-os-partner:56918
Change-Id: I03edb880e0649977030c1b87219ebebac631a519
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17163
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
While using '3' is fine for the standard gpe0 for skylake, I want
to make sure anyone that copies this code doesn't tweak GPE0_REG_MAX
without the hard coded index. If that does happen now things will
still work, but it may just not match the hardware proper.
BUG=chrome-os-partner:58666
Change-Id: I434b9a765a0a2f263490bb2b4ecb3635292d46c9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17160
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Update the chromeec submodule to current Chromium TOT.
Change-Id: Ia3d913703fdea0ece02074d8e2d4b30d97e9a97c
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17179
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add a GPIO macro that allows a pin to be routed to the APIC with
the input inverted. This allows a normal interrupt to get used as
a GPE during firmware and still be used as a perhiperal interrupt
in the kernel.
BUG=chrome-os-partner:58666
TEST=boot en eve and use TPM IRQ in firmware and OS
Change-Id: I77f727f749fdd5281ff595a9237fe1e634daba96
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17176
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
uart_debug.c was accidentally dropped in verstage in
64ce1d122c0464a4ef138fb7452a91b408b1a7c2
(https://review.coreboot.org/17136). Fix that.
Change-Id: If37a028550d419bada80d157c4de02fd82d26c89
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17175
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
In RS485 mode RTS line acts as a transceiver direction control.
The datasheet is not very clear about the polarity but register setting
here is tested to drive nRTS line high when transmitting.
Also note revision of B of the super-IO has errata and 8N1 setting does
not work properly, you would need revision C of the chip assembled to
fix this.
Change-Id: I705fe0c5a5f8369b0a9358a64c74500238b5c4ba
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/14998
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The checkpatch script takes a really long time to run, and when the
output is buffered to wait until it's finished, it's hard to tell if
the script is actually doing anything.
Instead, use tee to log the output and display it at the same time.
Change-Id: I3cf36e5e6ca28584103888ee1c6f125320ac068a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17125
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
On QEMU using SeaVGABIOS breaks some bootloaders, e.g. ISOLINUX does not
work and GRUB works but is forced in txtmode, instead of graphical mode.
Change-Id: If31d4e5ed19cbeed3f8f9dbc23cc738dd55986e5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17122
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Make bootblock_fsp_temp_ram_init as static inline.
Change-Id: Iacf24728a45fc6554d7a425feecc25e55ac5da6c
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17084
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add config in fsp 2.0/1.1 driver to reset if ramstage stage cache is
invalid during S3 resume.
Change-Id: I83fe76957c061f20e9afb308e55923806fda4f93
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17112
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
In anticipation of getting fixed material remove the disabling of
periodic training for MT53B512M32D2NP and MT53B256M32D1NP.
BUG=chrome-os-partner:59003
Change-Id: Iaadaa979d85cab78dda527db7480420af02fd832
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17130
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Explain the reasoning for the part_num strings used in the
memory SKU table explaining the necessity of keeping mosys
in sync with the strings used. It's possible that actual part
numbers could change as the higher speed material gets cheaper,
for example.
BUG=chrome-os-partner:58966
Change-Id: If895e52791dc56e283261b3438106116b8b2ea05
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17129
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add the necessary infrastructure to support eSPI SMI events,
and a mainboard handler to pass control to the EC.
BUG=chrome-os-partner:58666
TEST=tested on eve board with eSPI enabled, verified that lid
close event from the EC during firmware will result in an SMI
and shut down the system.
Change-Id: I6367e233e070a8fca053a7bdd2534c0578d15d12
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17134
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Export the pmc_gpe_init() function from pmc.c to pmutil.c
so it can be used in bootblock, and then call it from there
to initialize any GPEs for use in firmware.
BUG=chrome-os-partner:58666
TEST=test working GPE as TPM interrupt on skylake board
Change-Id: I6b4f7d0aa689db42dc455075f84ab5694e8c9661
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17135
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add the SOC definition for acpi_get_gpe() so it can be used
by the I2C TPM driver. Also add the I2C support code to
verstage so it can get used by vboot.
BUG=chrome-os-partner:58666
TEST=boot with I2C TPM on skylake board
Change-Id: I553f00a6ec25955ecc18a7616d9c3e1e7cbbb8ca
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17136
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The Deep S3 state will lose a lot of register contents that we
used to rely on for determining wake source.
In order to make use of this override the enable bit for wake
sources that are enabled for Deep S3 in devicetree.cb.
BUG=chrome-os-partner:58666
TEST=check for _SWS reporting wake source on S3 resume on skylake
Change-Id: If5113d6890f6cbecc32f92af67a29952266fe0ac
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17137
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Remove the FADT from the individual mainboards and select and
use COMMON_FADT in the SOC instead. Set the ACPI revision to 5.
Change-Id: Ieb87c467c71bc125f80c7d941486c2fbc9cd4020
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/17138
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The STABLE build of FILO does not build anymore with the
current HEAD of coreboot. However, the current HEAD of FILO
does build with the current HEAD of coreboot. Update FILO
STABLE to FILO HEAD.
Change-Id: I4eece3aaada0dfdf4da106d5d260b5b361537558
Signed-off-by: Kevin Paul Herbert <kph@platinasystems.com>
Reviewed-on: https://review.coreboot.org/15195
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Actual build was missing libpayload path.
Change-Id: I519869d2d64c66b3d1d557595c7d13c22cd40819
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17114
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
BUG=chrome-os-partner:57846
Change-Id: Ibd3ef8cebcf99ee2186dfed98b04373dd17e798e
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17093
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
|
|
BUG=chrome-os-partner:57846
Change-Id: Id6bd91b3fd6420994ad5811d362618b1a38a8afa
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17092
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Those registers are only used on more recent Intel platforms featuring a
PCH. The DP registers on G4X hardware are at a different offset.
Change-Id: I4660e547426ccec0b2095d897e4a8c86e0acf41e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17111
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Those registers are only used on more recent Intel platforms featuring a
PCH. The DP registers on G4X hardware are at a different offset.
Change-Id: Ib49e54d4e7d6595dc09fb1be35ac8178b80c7f71
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17110
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Also drop an odd comment about the resource allocator which seems to
work fine, with the right id.
Change-Id: I9099211fe946c28f90dd7730345b81a3f7f6f545
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/17095
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Three things are required to enable wake-on-usb:
1. 5V to USB ports should be enabled in S3.
2. ASL file needs to have appropriate wake bit set.
3. XHCI controller should have the wake on attach/detach bit set for the
corresponding port in PORTSCN register.
Only part missing was #3.
This CL adds support to allow mainboard to define a bitmap in
devicetree corresponding to the ports that it wants to enable
wake-on-usb feature. Based on the bitmap, wake on attach/detach bits in
PORTSCN would be set by xhci.asl for the appropriate ports.
BUG=chrome-os-partner:58734
BRANCH=None
TEST=Verified that with port 5 enabled, chell wakes up from S3 on usb
attach/detach.
Change-Id: I40a22a450e52f74a0ab93ebb8170555d834ebdaf
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17056
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Use intel common infrastructure to enable support for write-protecting
SPI flash range. Also, enable this protection for RW_MRC_CACHE.
BUG=chrome-os-partner:58896
TEST=Verified that write to RW_MRC_CACHE fails in OS using
"flashrom -p host -i RW_MRC_CACHE -w /tmp/test.bin"
Change-Id: I35df12bc295d141e314ec2cb092d904842432394
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17117
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
BUG=chrome-os-partner:58896
Change-Id: I281c799a1798f3353d78edd8a6cd16bbe762bc2c
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17116
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Write-protect SPI flash range provided by caller by using a free Flash
Protected Range (FPR) register. This expects SoC to define a callback
for providing information about the first FPR register address and
maximum number of FPRs supported.
BUG=chrome-os-partner:58896
Change-Id: I4e34ede8784e5587a5e08ffa10e20d2d14e20add
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17115
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I8d81b9cf280e724c935106c8f00692300094ad3f
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/17119
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
|
|
According to: "Intel ® 4 Series Chipset Family datasheet"
the IGD only has 1 IRQ pin.
Change-Id: I974f002f5a213056f4593a1eab10772527bb241d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17098
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This fixes an instability on 945gc where the IGD completely locks
up the system, when for instance tasked to do something with
compositing (like GNOME or GDM).
TESTED on ga-945gcm-s2l and d945gclf
TEST: launch GDM (gnome display manager)
Change-Id: Iec49bccf3e3164df9dc1e0b54460a616fe92e04d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17094
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
|
|
Add support for Kaby Lake RVP3.
Use kunimitsu at commit 028200f as base.
Kabylake RVP3 is based on Kabylake-Y with onboard Dual Channel
LPDDR3 DIMM.
* Update board name to kblrvp
* Remove fsp 1.1 specific code( As Kabylake uses fsp2.0)
* Remove board id function.
* Remove unused spd & add rvp3 spd file.
This is an initial commit does not have full support to boot.
Will add more CLs to boot Chrome OS with depthcharge.
Change-Id: Id8e32c5b93fc32ba84278c5c5da8f8e30c201bea
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17032
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
- Add comments dividing the payload sections.
- Move separate TINT and Memtest sections that were intermingled.
Change-Id: If0bbd6e182359c5186a8b958dd2c9ab9f0e0a3f3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17046
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This reverts commit a52f883b100f3229dd4d86c81c08781993861f73
(https://review.coreboot.org/16587).
The above commit caused another sever kernel boot regression upwards
of 2 minutes to get through kernel init on quad core systems.
BUG=chrome-os-partner:58994
Change-Id: Id4abc332bf2266e3b3b7be714371ce9cf329bcd9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17121
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
CQ-DEPEND=CL:379684
BUG=chrome-os-partner:58064
TEST=verified on hana rev0
Change-Id: Icd076dcaf07a97f3b83b428b9619e8a4dafe744d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7c483951a0dcd419735fffb79e6187f9ca3b08a8
Original-Change-Id: I9d886abf15931496ac61e8fd38d7fd306f2a1bf7
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/379504
Original-Commit-Ready: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Philip Chen <philipchen@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17107
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ia40543e5585845e5e6c178a620052c6a25927a5c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/17102
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
There are some sdram configurations that are no longer used. Drop them.
BUG=None
BRANCH=None
TEST=None
Change-Id: Ib6d2d58c3071147a3095bc1ed7fa7b02c748e1a5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 111d375005ec6a3b91e47acdd676e8f1644c931c
Original-Change-Id: I5f9278093f02e785b2894faa8e8cf09ecec20325
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/399122
Original-Commit-Ready: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17103
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
It has nothing to do with git configuration, but is one of our
convenience scripts. It also has nothing to do with rebases (except that
it can be comfortably used through git rebase --exec)
Change-Id: Icc60c4de486a0027fe2230e93b441e62ba022193
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/17101
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The relevant data is gone in Chrome OS depthcharge's master branch, and
so the script outlived its usefulness.
Change-Id: I04f3f168e23d4bc7c31692263a8eec3f97ee50de
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/17100
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
We found sdram may fail in pctl_cfg(), so we check the status in this
function. If it exceeds 100ms still in this function, we will restart
the system. We also found there are rare chances DDR training fails,
so also restart system in that case.
BUG=chrome-os-partner:57988
BRANCH=None
TEST=coreboot resets on failure and eventually the system comes up
Change-Id: Icc0688da028a8f4f81eafe36bbaa79fdf2bcea74
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 89e45f8352f62e19a203316330aba14ccc5c8b11
Original-Change-Id: If4e78983abcfdfe1e0e26847448d86169e598700
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/397439
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/17045
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
It's a better default than QEMU-armv7, which is currently the default
board when coreboot is configured for the first time, because most
coreboot development targets x86.
With this patch, the minimal steps to coreboot+SeaBIOS booting in QEMU
become:
git clone https://review.coreboot.org/coreboot.git && cd coreboot
make crossgcc-x86
make olddefconfig && make
qemu-system-x86_64 -bios build/coreboot.rom
Change-Id: Ie44a5d95547a55df93f29082c3b5a86fb83aa1e7
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/16987
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Currently, the only supported DSM type is I2C
HID(3CDFF6F7-4267-4555-AD05-B30A3D8938DE). This provides the required
callbacks for generating ACPI AML codes for different function
identifiers for I2C HID.
BUG=chrome-os-partner:57846
Change-Id: Ia403e11f7ce4824956e3c879547ec927478db7b1
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17091
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add acpigen_write_dsm that generates ACPI AML code for _DSM
method. Caller should provide set of callbacks with callback[i]
corresponding to function index i of DSM method. Local0 and Local1
should not be used in any of the callbacks.
BUG=chrome-os-partner:57846
Change-Id: Ie18cba080424488fe00cc626ea50aa92c1dbb199
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17090
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
1. Export i2c_generic_fill_ssdt to allow other device-specific i2c
drivers to share and re-use the same code for generating AML code for
SSDT. In order to achieve this, following changes are required:
a. Add macro I2C_GENERIC_CONFIG that defines a structure with all
generic i2c device-tree properties. This macro should be placed by the
using driver at the start of its config structure.
b. Accept a callback function to add any device specific information to
SSDT. If generic driver is used directly by a device, callback would be
NULL. Other devices using a separate i2c driver can provide a callback
to add any properties to SSDT.
2. Allow device to provide _CID.
BUG=chrome-os-partner:57846
Change-Id: I3a0054e22b81f9d6d407bef417eae5e9edc04ee4
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17089
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
1. If (LEqual (Op1, Op2))
2. ToBuffer (src, dst)
3. ToInteger (src, dst)
4. Buffer (n) { op1, op2 .... }
5. Return ( )
BUG=chrome-os-partner:57846
Change-Id: I24fe647c690b2dd4849f0c53b2672ac7a2caa2de
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17088
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Define reset_gpio and enable_gpio for touchscreen device so that when
kernel puts this device into D3, we put the device into
reset. PowerResource _ON and _OFF routines are used to put the device
into D0 and D3 states.
BUG=chrome-os-partner:55988
Change-Id: Ia905f9eb630cd96767b639aec74131dbd7952d0e
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17083
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Implement GPIO ACPI AML generating functions that can be called by
coreboot drivers to generate GPIO manipulation code in AML. Following
functions are implemented:
1. acpigen_soc_read_rx_gpio
2. acpigen_soc_get_tx_gpio
3. acpigen_soc_set_tx_gpio
4. acpigen_soc_clear_tx_gpio
BUG=chrome-os-partner:55988
Change-Id: I3d8695d73a1c43555032de90f14ee47ccee45559
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17082
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Add support to allow a device to define PowerResource in its SSDT AML
code. PowerResouce ACPI generation expects SoC to define the
callbacks for generating AML code for GPIO manipulation.
Device requiring PowerResource needs to define following parameters:
1. Reset GPIO - Optional, GPIO to put device into reset or take it out
of reset.
2. Reset delay - Delay after reset GPIO is de-asserted (default 0).
3. Enable GPIO - Optional, GPIO to enabled device.
4. Enable delay - Delay after enable GPIO is asserted (default 0).
BUG=chrome-os-partner:55988
Change-Id: Ieb2dd95fc1f555f5de66f3dda425172ac5b75dad
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17081
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I627338505fe1273366bc8f6f528d829b3162b371
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16916
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I7515288190ca57a321fb8ffe57a1181b638c336a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16978
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I2fae9e02e2fccaff97f2441fd17f8960e8ab9786
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16975
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ife9c0b8a1ab55fe683c88e34239d7f5806e1ff9b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16971
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I765814450b82755f84c010f63bc8f919bb0cd4c1
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16970
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I48ae27c5460020b9118e6ade1a3e610b542999c7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17040
Tested-by: build bot (Jenkins)
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This version of coreboot successfully starts a Harvey (Plan 9) kernel as a payload,
entering main() with no supporting assembly code for startup. The Harvey port
is not complete so it just panics but ... it gets started.
We provide a standard payload function that takes a pointer argument
and makes the jump from machine to supervisor mode;
the days of kernels running in machine mode are over.
We do some small tweaks to the virtual memory code. We temporarily
disable two functions that won't work on some targets as register
numbers changed between 1.7 and 1.9. Once lowrisc catches up
we'll reenable them.
We add the PAGETABLES to the memlayout.ld and use _pagetables in the virtual
memory setup code.
We now use the _stack and _estack from memlayout so we know where things are.
As time goes on maybe we can kill all the magic numbers.
Change-Id: I6caadfa9627fa35e31580492be01d4af908d31d9
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/17058
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Since reading/toggling of GPIOs is platform-dependent task, provide an
interface with common functions to generate ACPI AML code for
manipulating GPIOs:
1. acpigen_soc_read_rx_gpio
2. acpigen_soc_get_tx_gpio
3. acpigen_soc_set_tx_gpio
4. acpigen_soc_clear_tx_gpio
Provide weak implementations of above functions. These functions are
expected to be implemented by every SoC that uses ACPI. This allows
drivers to easily generate ACPI AML code to interact GPIOs.
BUG=chrome-os-partner:55988
Change-Id: I3564f15a1cb50e6ca6132638447529648589aa0e
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17080
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add functions to support generation of following AML operations:
1. PowerResource
2. Store
3. Or
4. And
5. Not
6. Debug
7. If
8. Else
9. Serialized method
BUG=chrome-os-partner:55988
Change-Id: I606736b38e6a55ffdc3e814b6ae0fa367ef7595b
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17079
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
Instead of using hard-coded values for emitting op codes and prefix
codes, define and use enum constants. With this change, it becomes
easier to read the code as well.
BUG=chrome-os-partner:55988
Change-Id: I6671b84c2769a8d9b1f210642f3f8fd3d902cca2
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17078
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Return config->name if it is not NULL.
BUG=chrome-os-partner:55988
Change-Id: I9ae229949b73de6f991383daae8d962d6cf457a7
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17077
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I2a3bf53e6bc4084305238fa176ae46161da4be8f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16967
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I4e628cbe11da32d291c4b8e4c7be91e9b0a86ad9
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16966
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I137b27ffb0e54a9ca6b0bd3a454b1d99b3e1c22b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16907
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This patch adds a Makefile rule for mvmap2315 to install a BDB and
bootblock code in the BOOTBLOCK region. The resulting BDB has a
header and data both signed by a RSA-4096 key.
BUG=chrome-os-partner:57889
BRANCH=none
TEST=emerge-rotor coreboot and examined the output binary. Booted
coreboot.rom.
Change-Id: I1e20a09b12f8f8ed4d095aa588e3eb930f359fc5
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/16747
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This pulls in the bdb support for futility so that rotor can build.
Change-Id: Icfa432fb840bea3e1616933ed02cf34a681fa3ce
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17061
Tested-by: build bot (Jenkins)
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
amdfwtool currently gets built for a specific size of ROM chip. This
should be updated to be passed in on the amdfwtool command line, but
until that's done, stop sharing the tool between builds.
This caused a problem for abuild when we tried changing the default
rom to one that used a 256KB rom chip. That wasn't large enough for
all of the files included by amdfwtool on several platforms, causing
build failures.
Change-Id: Ib08f3283e5be956f995a4a416a70b12a32462882
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/17070
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Id42a2901cf76e6b867f62a752a38bbd6f6e5f54e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/17059
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I9d27c276053c51021166f4b22d150060e415d08f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/17025
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
|
|
Add choice to select between FSP 1.1 & FSP2.0 driver to be used.
Change-Id: Ied7eab6f4a2191e0bcf220cde5ca519a3c3e2d76
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17051
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Create the initial Snappy variant which refers to the Reef device.
Snappy, an Apollolake-platform, is deviated from reference board Reef.
BRANCH=master
BUG=None
TEST=Built & booted
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Change-Id: I6f32c0b1a154edbd8c4822acdbdbdbeb4a0098e6
Reviewed-on: https://review.coreboot.org/17043
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
While we stub out free(), tools like coverity scan have no idea, and it
might change in the future. So free it.
Change-Id: I1d93a6f45b64445662daa95b51128140ad0a87e2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1260716
Reviewed-on: https://review.coreboot.org/17055
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
|
|
Change-Id: Ib58126e1c9001ed679e161d6d06241fac762bdb3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/17049
Tested-by: build bot (Jenkins)
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Enable mainboard Kconfig to select between FSP 2.0 & 1.1 driver to be
used.
If mainboard Kconfig selects MAINBOARD_USES_FSP2_0 the FSP2_0 driver is
used else FSP1_1.
Change-Id: I724aaa87c2b0b8f6ddb18f61af9c37176ef632f2
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/17044
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
