summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-12-09gizmosphere/gizmo2: Changes to make it gizmo2Dave Frodin
The preceding patch copied gizmo2 from the amd/olivehill board. This commit includes the changes required to make the code reflect the gizmo2 hardware: - Update the vendor Kconfig to add gizmo2 - Update the mainboard Kconfig - Update devicetree - Add support in for the soldered down DDR3 - Update the CODEC verb data - Update the graphics connector settings - Adjust the temperature thresholds for the fan What's missing: - Interrupt routing tables Gizmo2 can boot DOS and Ubuntu 14.10. Change-Id: I3d7202957c082974689f2a8c04d8cd33dbdc1a89 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/7722 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-09UCB RISCV: Switch to DYNAMIC_CBMEMKyösti Mälkki
Change-Id: Iaaf68fd19f7b9a5b6849fffde3a9c68cb7862367 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7619 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-12-09mainboard/siemens/sitemp_g1p1/mainboard.c: Fix implicit conversionEdward O'Callaghan
Clang warns of an implicit conversion from 'double' to 'int' e.g. changes value from '26.67' to '26'. Thus take the floor() of the array and not change orginal behaviour. Change-Id: Ifcc7bbfe8d627451b82053f53a885f315e2550ec Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7725 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-12-09southbridge/amd/sr5650/sr5650.c: Fix bitwise logic and mask in loopEdward O'Callaghan
Correct mask to select bits 4-6 inclusively as per comment and use bitwise operations while working with bits. Be sure to write back out the data on the retrain. See: commit cab9efb2 southbridge/amd/rsXY0/cmn.c: Fix bitwise logic and mask in loop Change-Id: I95d1799514157b7849f3e473837aaf2fd9bd59b9 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7692 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-12-09mainboard/{iwill,amd/serenget_*}: Fix ptr discards const qualifierEdward O'Callaghan
Change-Id: I22e55eb2b7fe06c416e5e4fd322045bc7031ed63 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7693 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-12-09utils: Remove references to tracker from manpagesMartin Roth
abuild, inteltool, and superiotool's manpages still referenced reporting bugs to tracker.coreboot.org. Remove that url and change the message to point to the coreboot mailing list instead. Change-Id: I7a85bc2b36ccdb7f3798a39a08345c1a02a67e65 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7712 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-09fsp platfoms: add prototype & consolidate main entry-pointMartin Roth
- In '-ffreestanding' main() is just as any other function and so it needs a type-signature. Fixes a clang warning. - Bay Trail and Rangeley have the updated romstage.c with the code moved into the chipset, put the prototype in romstage.c. - The sandybridge code has not been updated, so the prototype for it goes into chipset_fsp_util.h, next to the prototype for romstage_main_continue. - Correct the return value of baytrail main() from void * to void and remove the unnecessary asmlinkage tag. I'm surprised that this didn't generate a warning... Change-Id: I85ac0797d1e55d2b7ffdca039a52820d7827e704 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7724 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-09mainboard/gizmosphere/gizmo2: Start adding new mainboardDave Frodin
This is a direct copy of the amd/olivehill mainboard which will be the starting point for this port. Change-Id: I6a643f7ac35d89e21df0ffdf4e61a2da46e19b82 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/7721 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-08drivers/intel/fsp/fsp_util.c: Remove attribute,optimize("O0")Edward O'Callaghan
This is not actually required. Tested on 'minnow max' hardware as well as compared the asm of the optimized and non-optimized. Thanks Martin! Change-Id: I06e71876c3a3a15101013623797c2ebbf449756d Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Found-by: Clang Reviewed-on: http://review.coreboot.org/7694 Reviewed-by: Martin Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-12-08northbridge/amd: Add the audio device to the PCI devicesDave Frodin
Change-Id: I826f98e450c9a614930a5e83c7c6bfb4ccdc5984 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/7630 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2014-12-08mainboard: Fix correct index variable usage in double loop constructEdward O'Callaghan
Change-Id: I672c532c3f7179038d41f269bba434b8703e254b Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Found-by: Clang Reviewed-on: http://review.coreboot.org/7718 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-08edid: fill reserved bits fields in cb_framebufferPatrick Georgi
If it's a 4 byte format (as per documentation), there are some reserved bits, so let's mark them as such... Change-Id: I50f12cfff2c9bb9d082a5f3c3ac54c0d514d862b Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/7674 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-12-08mainboard/siemens/sitemp_g1p1/mainboard.c: Remove unicode in stringEdward O'Callaghan
Remove illegal character encoding in string literal. Change-Id: I3c8dc67363705a2160e8266d1cea78c0d34d076f Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7713 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-08vendorcode/amd/agesa/fam10: Build as a static libraryEdward O'Callaghan
Following the same reasoning as commit ee905a8 vendorcode/amd/agesa/fam15tn: Build as a static library Since AGESA is stage-independent, we can build it just once, and use the resulting static library in both rom and ram stages. Change-Id: I8fbb318daacf64a14a71022705eb040a01c34fa8 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7699 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-08vendorcode/amd/agesa/fam15: Build as a static libraryEdward O'Callaghan
Following the same reasoning as commit ee905a8 vendorcode/amd/agesa/fam15tn: Build as a static library Since AGESA is stage-independent, we can build it just once, and use the resulting static library in both rom and ram stages. Change-Id: I7798b689db3e582649eb4af4ccd1877bb1d49063 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7698 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-08intel/baytrail: Spelling fixesMartin Roth
Change-Id: Ideb58634a029d55746421ad1ea4b80811bca403c Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7705 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-08intel/fsp_baytrail: Spelling fixesMartin Roth
Change-Id: Ica9e3a91718a7e490ff80e5029fc29650355eb47 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7704 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-08samsung/exynos5420: Spelling FixesMartin Roth
Change-Id: I966645c83ae78943a7dbb9dc05af4fded6f4e5b5 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7703 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-08intel/broadwell: Spelling fixesMartin Roth
Change-Id: I2f970c6970b4996fcefbde89332210f5a1afe836 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7702 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-07vendorcode/amd/agesa/f1{5,5tn,6kb}: Silence empty loop warnEdward O'Callaghan
Add decorations to specify that empty loop is intended so. Change-Id: Ia3e40d341eca5e26da3832edc733cf1ccc96c136 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Found-by: Clang Reviewed-on: http://review.coreboot.org/7688 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-07mainboard/google/samus: Fix usage of GNU field designator extEdward O'Callaghan
Following the reasoning in, 8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension In C99 we defined a syntax for this. GCC's old syntax was deprecated. Change-Id: Id3b16872f62660393d938d6f95977a4e3842d0d1 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7690 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-07southbridge/dmp/vortex86ex/southbridge.c: Silence bitwise op warnsEdward O'Callaghan
Silence some useless Clang warns in this case. Change-Id: I202a85f7dec52c65d80e2bc56f7d9e4eb3e61d48 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7696 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-12-07Kconfig: Remove ACPI_SSDTX_NUM.Vladimir Serbinenko
Its scope is limited to a single mainboard and is only to go through ifdef. Kill it and move the value to the code. Change-Id: I76a87e2790d57dee8f37b51e33d0689fffd3a59d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7135 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-07ga-b75m-d3h: Remove duplicate sata_port_mapVladimir Serbinenko
Change-Id: I128f1dfea013a4f94c5b006a90c10aa32563d81c Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7691 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-07vx800/vga.c: Remove extraneous parentheses.Vladimir Serbinenko
Change-Id: Ic81b5f66871ec78c72f2adc5723f22fa94a672e8 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7682 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-07via/vx900: Plumber registered DIMM to right place.Vladimir Serbinenko
Currently due to enum mistake DDR3 = 0xb was confused with DIMM type and interpreted as LRDIMM, considered unregistered and so every RAM was unregistered. Registered RAM is rarely used, so I suppose the code was never tested with them. For unregistered RAM exactly the same codepath is followed. Change-Id: I02fe8b1fd7be3bd382399ffa0eb513965a2a6d77 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7687 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-07ddr3: Plumber DIMM type to parsed structure.Vladimir Serbinenko
Useful for distinguishing registered modules. Change-Id: Ibf4a0f2cde6d50a1c5c1da0f50e3022a2bc7ccd7 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7686 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-07hp/pavilion_m6_1035dx: select NO_UART_ON_SUPERIO in KconfigAlexandru Gagniuc
Change-Id: I324cdaf2025898b74bfc0d40c5ed8b88d2be5ad4 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/7679 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-12-07x200/devicetree: Remove extraneous eventc.Vladimir Serbinenko
Change-Id: If72daed326216e24da85a6a9d342f36f4e1d9de5 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7685 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-07x200/romstage: Add missing include.Vladimir Serbinenko
Change-Id: I47aa8619ba1e1939707ec654ffb54cae316929cf Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7684 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-07nehalem/raminit: Add decorations to specify that empty loop is intended so.Vladimir Serbinenko
Change-Id: I6a05683daa6105e26017d1abf45881a9ef93ea30 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7683 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-07vx800: Silence clang warnings.Vladimir Serbinenko
I have no such board to check the real fixes but this board shouldn't block benefits for the rest of the tree. Change-Id: I9e9d4af1b360bcf0099ac2901b08f7fcd7569097 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7681 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-07early_me_native.c: Remove unused pci_write_dword_ptr.Vladimir Serbinenko
Change-Id: I97f4ef373c250665c4a2265571e71a27ecef13da Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7680 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-07lenovo: Remove duplicate devicetree.cb eventc entry.Vladimir Serbinenko
Keep only the last one: it was the one which was really used. Change-Id: I19132f6224d6847e615e3c582aaa6e66b0d56c7a Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7677 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-07vendorcode/amd/agesa/f15tn/*/F15TnMsrTables.c: Topology Extensions SupportEdward O'Callaghan
Topology Extensions Support (bit 54 of 0xC0011005) applies to PACKAGE_TYPE_FS1r2 also. Rids us of: "Re-enabling disabled Topology Extensions Support" showing up in dmesg. Change-Id: Id123fa9632936c150cf1aebc4d34b404a4398ead Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7671 Tested-by: build bot (Jenkins) Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2014-12-06kontron/986lcd-m: Fix PCI interrupt routing.Vladimir Serbinenko
The current interrupt routing shares interrupt 5 between LPC and PCI which isn't possible. Use IRQ 11 for all devices in PCI mode. Move conflicting LPC to free IRQ. Change-Id: I3ac8c2f19195ef6b07f4ee7dde64dd038d024126 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7477 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-06Remove IRQ_SLOT_COUNT on all boards without PIRQ table.Vladimir Serbinenko
This config is used only to generate PIRQ table. If no such table is supplied there is no need for config. Change-Id: I537d440f53019a6bf7f190446074e75e7420545a Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7566 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-06vendorcode/amd/agesa: Remove unused helper.c fileAlexandru Gagniuc
The contents of these files were guarded by a check for the _MSC_VER macro, which we don't use. Change-Id: Ic595c8e6284c54e1449cf21e0cebee8c9ce7c682 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/7670 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-06vendorcode/amd/agesa: Make Porting.h common between familiesEdward O'Callaghan
Change-Id: Ica17b2452498f30b710533caf610c9f0c1a0452c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7594 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-12-06northbridge/intel/*/acpi/igd.asl: Trivial indent style fixEdward O'Callaghan
Change-Id: I26e92645264c69bbc032b0e7e44d7d31de2dfa4d Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7665 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-06soc/qualcomm/ipq806x/Kconfig: Fix indent styleEdward O'Callaghan
Change-Id: I72c9c1f5811fafaeec9572b05726d5677e2c28b1 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7669 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-06sb/amd/agesa/hudson/: Don't include IMC and XHCI blobs by defaultEdward O'Callaghan
Don't build in non-essential blobs by default. However, if the user selected to use the blobs repository, then default to including the blobs. Change-Id: Ie90f00d7c18d725f24fe1503fadaf098d3cefa4a Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/7638 Tested-by: build bot (Jenkins)
2014-12-06mainboard/lenovo/g505s/Kconfig: Has no SuperIOEdward O'Callaghan
Change-Id: I30fdfb70506241838436c3afbf6ddfdbff5cb302 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7668 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-12-06mainboard/lenovo/g505s: Build in EC ASL support for KBD/AUX portsEdward O'Callaghan
Rather than have Linux report: i8042: PNP: No PS/2 controller found. Probing directly. and go off probing PNP config space, build in EC ASL for the PS/2 keyboard and mouse. The ASL explicitly passes these resources to the Linux to avoid said probe. ASL Details: PS/2 keyboard (PNP0303 at 0x60,0x64 irq 1 ) PS/2 mouse (PNP0F13 at 0x60,0x64 irq 12) Change-Id: I0697fab65915907fbe2b3551182b3a1b0d665ddb Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7651 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-06ec/compal/ene932/acpi/superio.asl: Provide PNP0F13 AUX ASLEdward O'Callaghan
Provide ASL to support the AUX port (a.k.a Mouse) found at 0x60,0x64 irq 12 on this EC. Change-Id: I6969ae4d492570136a8e14e42509638857e1ed85 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7650 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-12-06mainboard/lenovo/g505s: Toggle on IOMMU supportEdward O'Callaghan
Toggle on in devicetree.cb and build into AGESA by buildOpts.c. Add ACPI and MPTABLES interrupt routers for IOMMU also. Change-Id: Ia838f9b70f09ed1180daeb5382edc08c4b74946c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7643 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-06vendorcode/amd/agesa/f15tn: Fix GnbIommuScratch in AGESA compilationEdward O'Callaghan
Missing IOMMU support is missing from the libagesa Makefile, it also lacks a header with type-signature and a few bad typecast issues. Change-Id: I7f2ad2104de9baaa66dbb6ffeb0f2b4d35fa5c16 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Co-Author: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/7642 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-06mainboard/*/acpi/superio.asl: Use non-local inclusion syntaxEdward O'Callaghan
Use non-local inclusion syntax over relative paths for 'drivers/pc80/ps2_controller.asl'. Change-Id: Ie2bfa893dc268ec5118d2a9addadbc759d85d357 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7664 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-12-06vendorcode/amd/agesa/fam15tn: Clean #includes in public headersAlexandru Gagniuc
Right now, coreboot code using AGESA headers can only build if all the AGESA path are given to the compiler via the "-I" option. This is sub- optimal, as it requires us to have every AGESA source directory specified as a compiler include path. This pollutes our global include paths. We restrict the compiler include paths to only allow "AGESA_ROOT/" and "AGESA_ROOT/Include". We then modify the AGESA headers to specify non-local include files relative to "AGESA_ROOT/Include". We use the convention that includes relative to the directory of the header are included as "path/to/header.h", while includes relative to AGESA_ROOT are included as <path/to/header.h>. This change allows building coreboot code based on AGESA with the limited subset of include paths, but does not allow AGESA itself to build with this restricted subset. Change-Id: I31102273c8caa8d6b1d80774bfd35711825bec03 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5424 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-06mainboard/lenovo/g505s/buildOpts.c: Trivial variable renameEdward O'Callaghan
Minor fix to avoid confusion, nothing to see here. Change-Id: I89d56a91d2df049e85cf49c23218620caba84880 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7654 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-06fsp_baytrail: Allow selection of USB controller by get_optionMartin Roth
It was requested to be able to update XHCI vs EHCI via get_option, so I've added it here for minnow max. This could get moved to the chipset_fsp_util.c file later, but I'm adding it here for now. More checking needs to be added to this: - Are both controllers enabled in devicetree? If not, we don't want to allow the switch. Change-Id: I4d8d2229cb9fa0cd9068701454b28ffac6d8e767 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7633 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-06intel/minnowmax: Update devicetreeMartin Roth
- Align register values. - Enable both EHCI and XHCI so the choice of port used can be made at runtime. When both are enabled in devicetree, XHCI currently gets disabled by the FSP chipset code. This can be overridden in mainboard code or by a Kconfig entry, but there's a question about whether or not that's desired. - Enable function 1c.0 so the rest of the functions will be seen, even though the function is not actually used. This is a short-term fix, as the correct solution is to determine whether or not any of the other functions are enabled, and not to hide function 0 if they are. I am working on that, but I want to get this in for now. Change-Id: I83ae12c2393024b82a55d0b3a5ffa8782e16107e Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7663 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-06southbridge/hudson: Disable USB controllers if devicetree says soAlexandru Gagniuc
Change-Id: I009a01d3324d48d2eeda87d74c8e3e7c27958ee2 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5525 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-05fsp_baytrail: Update function disable codeMartin Roth
- The EDS has the function disable bit for eMMC incorrectly listed as 8. Changing it back to the correct bit 11. - The FSP will disable functions that it is told are disabled, so coreboot code that disables the functions is redundant. Removing it. Change-Id: I95c31d92d3af5182ddf7fd47f651bbb61cdedb82 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7653 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-05minnowmax board: Update KconfigMartin Roth
- The ROM chip is 8MB, not 4MB. - Default to the 2GB SKU instead of 1GB - that's what's out right now. - Set CBFS size to 3MB - that's what the firmware descriptor is set to. Change-Id: Ic77f5c1e898dca39de573623707ff5f5e5ca9682 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7649 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-05fsp_baytrail: Kconfig update for Gold 3 FSPMartin Roth
The documentation for the FSP gives the name as BAYTRAIL_FSP.fd instead of the old FvFsp.bin. Change-Id: I69c7c5ff49afd6552612cf50c9ca9b30cfb003e2 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7648 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-05fsp_baytrail: Update microcode for Gold 3 FSP releaseMartin Roth
New microcode for Bay Trail I B2/B3 and D0 parts was released in the Gold 3 Bay Trail FSP release. Change the microcode size to an area instead of the exact size of the patches. This will hopefully reduce updates to the microcode size. Change-Id: I58b4c57a4bb0e478ffd28bd74a5de6bb61540dfe Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7647 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-05FSP platform microcode: Update to remove Kconfig variableMartin Roth
Move the Kconfig variable into a .h file - this does not need to be in Kconfig. Change-Id: I1db20790ddb32e0eb082503c6c60cbbefa818bb9 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7646 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-05ipq8064: Make clock code build in corebootVadim Bendebury
Include clock.c in the appropriate coreboot stages, modify the code to build cleanly. Use proper pointer cast in .h files. BUG=chrome-os-partner:27784 TEST='emerge-storm coreboot' still succeeds Original-Change-Id: I227c871b17e571f6a1db3ada3821dbb1ee884e59 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196407 (cherry picked from commit 75decceccd97298974891bb98b796eccfe11f46c) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I7d44464d4ca8153e84407fc05a25e2e79e74901e Reviewed-on: http://review.coreboot.org/7271 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-12-05ipq8064: prepare UART driver for use in corebootVadim Bendebury
These driver needs to be in src/lib, and the include file needs to be renamed to avoid collision with the top level uart.h. BUG=chrome-os-partner:27784 TEST=emerge-storm coreboot still works Original-Change-Id: Ie12f44e055bbef0eb8b1a3ffc8d6742e7a446942 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196393 (cherry picked from commit c5618fd418642f5b009582f5f6bc51f7c9d54bec) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I5e25ae350ac5e71b47a0daef078b03cc5ac35401 Reviewed-on: http://review.coreboot.org/7270 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-05fsp_baytrail: remove register option for TSEG sizeMartin Roth
Set the UPD entry based on the Kconfig value instead of having two separate places that the value needs to be set. Change-Id: I3d32111b59152d0a8fc49e15320c7b5a140228a6 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7490 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
2014-12-05fsp_baytrail: update printk to use FSP_INFO_LEVELMartin Roth
Update the printk statements to use FSP_INFO_LEVEL instead of BIOS_DEBUG. These values are currently identical, but by using the second #define, it lets them all be changed as a unit. This can be overridden for a particular platform by adding a #define in chipset_fsp_util.c. Change-Id: Idbf7e55090230ec940c7c8cd3ec8632461561428 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7520 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-05fsp_baytrail: update for UPD_DEVICE_CHECK macroMartin Roth
- Update chipset_fsp_util.c to use the UPD_DEVICE_CHECK macro. This makes the code more standardized and easier to read. - Add some debug printing that was removed in the transition. Change-Id: Iea24dd9ca53f39791bc6371291a3fa7a6fc5ed0f Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7498 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-05fsp_baytrail: update to add the UPD_MEMDOWN_CHECK macroMartin Roth
- Update chipset_fsp_util.h to add the UPD_MEMDOWN_CHECK pointing into the PcdMemoryParameters structure. This is baytrail FSP specific, so it's put into the chipset code instead of the 'driver' code. Since some of the values need to be decremented and some do not, a second parameter was added to control this. This macro also does not print out the values as they are printed out separately if memory down is enabled. - Update chipset_fsp_util.c to use the UPD_MEMDOWN_CHECK macro. This makes the code more standardized and easier to read. Change-Id: I233e45db43af4726cab41f4880f1706cf8abb0b7 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7632 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-05fsp_baytrail: update for UPD_SPD_CHECK macroMartin Roth
Update chipset_fsp_util.c to use the UPD_SPD_CHECK macro. This makes the code more standardized and easier to read. Change-Id: I9944e1a4df82e64a205598e98ed0f3b840af1019 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7489 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2014-12-05fsp_baytrail: update to add the UPD_DEFAULT_CHECK macroMartin Roth
- Update chipset_fsp_util.c to use the UPD_DEFAULT_CHECK macro. This makes the code more standardized and easier to read. - Update chip.h to use standardized macros Change-Id: Icbe5ec92b0aa31e21f3dd1593a96b246d83008f7 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7488 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-05drivers/intel/fsp: add upd macros and #definesMartin Roth
Add macros and #defines for working with the UPD data. This makes the code look much cleaner. Remove the UPD_ENABLE / UPD_DISABLE from fsp_rangeley/chip.h and include the fsp_values header instead. This fixes a conflict. Change-Id: I72c9556065e5c7461432a4593b75da2c8a220a12 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7487 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-05x86: Update the check for Forbidden global variablesFurquan Shaikh
Add a section .illegal_globals to romstage and check that the section does not contain any variables while creating romstage. [pg: Handle individual AGESA special cases in the linker script instead of whitelisting everything remotely AGESA related in the Makefile.] Change-Id: I866681f51a44bc21770d32995c281b556a90c153 Signed-off-by: Furquan Shaikh <furquan@google.com> Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/7306 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-05RISCV: one last little nit to make it build and runRonald G. Minnich
Change-Id: I6e9e1dff09c08079774f7d6e60e67a12760d37b4 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/7645 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-05vendorcode/amd/agesa/f15tn: Trim out ASCII art in GnbIommuScratch.cEdward O'Callaghan
TL;DR ASCII art that sucks, remove it. Change-Id: I424736b040fe019bba6155de76903225a266760d Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7641 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-05lenovo/g505s: Kconfig: Remove unused PIRQ legacy bitsEdward O'Callaghan
Since this board does not provide a PIRQ table. Change-Id: I1068dd99c4cecdd2113484fe24ae2bb86a058cb3 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7644 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-12-04RISCV: get RISCV to build againRonald G. Minnich
This makes lzmadecode 64-bit clean (I hope). It also cleans up a few other nits. Change-Id: I24492e9f357e8d3a6de6abc351267f900eb4a19a Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/7623 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-12-04vendorcode/amd/agesa/f*/cpcar.in: Remove non-GCC CAR implementationEdward O'Callaghan
We don't actually use nor support these as our implementation makes use of gcccar.inc. They maybe useful as a reference for history so lets keep them in version history. Change-Id: I388251dead449dde14283e57db39c37982d947b2 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7596 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-04to-wiki.sh: Show the same status for clones.Vladimir Serbinenko
While it may not be the best way theoretically as theoretically only one of clones may fail if clones are not perfect, in practice there is more variance between e.g. different X60 variants than between most of the clones, yet we put all X60 variants together. Also in most cases we don't even have a way to tell the clones apart. Change-Id: I786aeed55300026fae0d9f0497d0c830a9f5e452 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7564 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-12-04via/epia-n: Switch to per-device ACPIVladimir Serbinenko
Change-Id: Ica4d49b9f4f192b1544ba8cbd5f28a4019259be0 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6942 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-04southbridge/amd/agesa/hudson/Kconfig: Fix space/tab usageEdward O'Callaghan
Change-Id: I390c14b3e145dab45b96e25833fe5fed2e5a0adc Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7637 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-03i945: Consolidate acpi/platform.aslVladimir Serbinenko
Change-Id: Iccb2dda8a427e483c04693e46b00e0bc2452a26b Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7086 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-12-03i82801gx: Enable upper CMOS in bootblock.Vladimir Serbinenko
Otherwise checksum may not work correctly on early stages. For compatibility with old bootblocks also enable it early in romstage. Change-Id: Ie541d71bd76af182e445aa5ef21fe5ba77091159 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7556 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-12-03build system: fix alignment functionPatrick Georgi
It seriously miscomputed alignment values, always off-by-one, and off-by-an-alignment for aligned values. Change-Id: Ide3477d09d34d7728cb0666bb30dd9f7a3f1056d Reported-by: Dave Frodin <dave.frodin@se-eng.com> Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/7635 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2014-12-03mainboard/hp/pavilion_m6_1035dx: Remove HUDSON_LEGACY_FREEEdward O'Callaghan
The Embedded Controller sits behind the LPC bridge and so needs LPC decodes to be enabled. Remove the LPC decode enable out of agesawrapper.c. The enable is in fact done in: 'VOID FchInitResetLpcProgram(IN VOID *FchDataPtr)' which writes the magic '0xFF03FFD5' to register 0x44 of the PCI 14.3 LPC Bridge to enable LPC decodes when HUDSON_LEGACY_FREE is not defined. Change-Id: Ia487d21faa0fceb2557dbce14ef8822116fada91 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7628 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-12-03util/cbmem: Print name instead of ID of CBMEM_ID_SMM_SAVE_SPACEPaul Menzel
Commit b4b9eb39 (x86: provide infrastructure to backup default SMM region) introduced the new CBMEM type `CBMEM_ID_SMM_SAVE_SPACE`, but did not add its name `SMM BACKUP` to the utility `cbmem`, causing the following output, when running `cbmem` on a system making use of `BACKUP_DEFAULT_SMM_REGION`. 7. 07e9acee 7f7e5000 00010000 Fix that by adding the name `SMM BACKUP` to the struct `cbmem_id_to_name`. Change-Id: Ib24088c07af4daf6b7d8d5854283b5faa2ad6503 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/7176 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-12-03mainboard/lenovo/g505s/Kconfig: Remove HUDSON_LEGACY_FREEEdward O'Callaghan
The Embedded Controller sits behind the LPC bridge and so needs LPC decodes to be enabled. Remove the LPC decode enable out of agesawrapper.c. The enable is in fact done in: 'VOID FchInitResetLpcProgram(IN VOID *FchDataPtr)' which writes the magic '0xFF03FFD5' to register 0x44 of the PCI 14.3 LPC Bridge to enable LPC decodes when HUDSON_LEGACY_FREE is not defined. Change-Id: I0b4e99cc0d6f89f0261f26ee61b8c175a373c730 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7625 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-12-03AGESA fam14: Move agesawrapper_amdinitmmio()Kyösti Mälkki
Enabling MMCONF PCI-e configuration access should be done before console_init(). This will likely move further to bootblock one day. Change-Id: I20c93fe6e79ef7e7981b2f1cd3c6b446feea0f4e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7163 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-03AGESA: Trace execution with AGESA_EVENTLOG()Kyösti Mälkki
Change-Id: I5601ed92ca808603b0a9edad118ca54aa168aceb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7604 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-03AGESA: Common agesawrapper for S3 resumeKyösti Mälkki
Change-Id: I27cd073331659e47d241a0ce249b2d080b4bab5c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7162 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-03AGESA: Add common eventlogKyösti Mälkki
Change-Id: Ibbf10a53ea671990d336340fdc96dfb37b5defd0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7161 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-03AGESA fam16kb: Move clearing of NoSnoopEnable bitKyösti Mälkki
Originally from commit 4ca72139 move this code now from cpu/ to northbridge/. Change-Id: I38517cff273dd8f78bf5eda1d48fd1cd820ced88 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7603 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-03AGESA: Remove duplicate OemCustomizeInitEarly declarationsKyösti Mälkki
Change-Id: I59b2c3f235a6b30e68e78c2fe4065fbc0488bc4c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7158 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-03AGESA fam15tn / fam15rl / fam16kb: Common agesawrapperKyösti Mälkki
Split FCH parts to southbridge/hudson. Change-Id: Ibe305fc3e47422523a57ffa9cf69cd401c786ee2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7159 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-03AGESA fam15tn / fam15rl / fam16kb: Move LPC decode enable for serial portKyösti Mälkki
Move LPC decode enable out of agesawrapper.c. It should not be on the execution path of AP CPUs and function is not related to AGESA per se. Change-Id: I19d6a20fbc7a3d28601caa9aaa1d73d6930257ae Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7602 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-03AGESA fam14: Common agesawrapperKyösti Mälkki
Use copy of amd/persimmon. Change-Id: I7404cb164df9065bcdbaaf5367018870ea675adc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7157 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-03AGESA fam12: Common agesawrapperKyösti Mälkki
Change-Id: Ic44d827323dc0d3c776e79c22088a2f1f654bcf2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7156 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-03AGESA fam15: Common agesawrapperKyösti Mälkki
Place empty OemCustomizeInitEarly() and OemCustomInitPost() in a common file for now and split eventlog parser to a separate file. Change-Id: Ia8277ad13a800898b3e1a4e9c8fbd838ae2efeae Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7155 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-03AGESA fam15: Move LPC decode enable for serial portKyösti Mälkki
Move LPC decode enable out of agesawrapper.c. It should not be on the execution path of AP CPUs and function is not related to AGESA per se. Change-Id: I19c6a9c7d71c9899fdc898c09c337d747424fcec Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7601 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-03AGESA: Report events with AGESA_EVENTLOG()Kyösti Mälkki
NOTE: For fam12 and fam14 ASSERT() is defined empty so execution may fall through critical failures. Change-Id: Ifef65d749d340f1df3a43b5fcb38c4315ef944e8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7154 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-03AGESA: Use common header for agesawrapperKyösti Mälkki
Change-Id: I5189d0c55635aeb29553fd04a67490cfee3d88d5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7153 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-03AGESA Hudson/Yangtze: Remove unused GPP configuration in devicetreeKyösti Mälkki
GPP config from devicetree.cb is not implemented for fam15tn/fam16kb. Also only for asus/f2a85-m the configuration value matched the actual programming. Change-Id: Ic7a9aa1360f4ba35d202f3f7dd1fc3c20a52dde0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7600 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-03AGESA Hudson/Yangtze: Remove obsolete devicetree parametersKyösti Mälkki
Change-Id: Ic6affae7e508f28b131c7d07191289f4fcbf2d74 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7599 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-12-03SPI: Add vendor AtmelKyösti Mälkki
Change-Id: I60e578003b857f5dcabb2e9bc75aa46acddb62b8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7433 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-03SPI: Add Macronix part MX25U12835FKyösti Mälkki
Change-Id: I82482419afdf536a19b99c79131fa5844aaaec07 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7432 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 11:21:13 +0000