summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-10util/nvramtool: fix building on OpenBSDEvgeny Zinoviev
OpenBSD's gcc 4.2.1 doesn't know about _Noreturn Change-Id: Ie9e1885c483941d3d0ce8c8948af53f1ef8bb5db Signed-off-by: Evgeny Zinoviev <me@ch1p.io> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-10util/board_status: Add support of CMOS values dumpEvgeny Zinoviev
Change-Id: I89f9a0e9622557b01dda52378f8f1323777bce39 Signed-off-by: Evgeny Zinoviev <me@ch1p.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/28565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-10abuild: Always build the default configNico Huber
Abuild allows us to add config files below `configs/` for each mainboard. So far, these were built instead of the default config. However, that allows to hide errors in the default config. Hence, we should build that too in any case. Change-Id: I94075dbaa6fabeb75bdbc92e56f237df80c15cef Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39382 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-10soc/intel/xeon-sp,mb/ocp/tiogapass: Don't fake binariesNico Huber
If we don't pretend to have binaries, there is no need to add fake ones. This also fixes building the default config. Change-Id: I8f933f24a734a9ce3d82ef57f7f234ee4dfa86e9 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39383 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-10lib/spd_bin: Correct LPDDR3 SPD informationEric Lai
Follow JEDEC 21-C to correct JEDEC LPDDR3 SPD information. Based on JEDEC 21-C, LPDDR3 has the same definition with LPDDR4. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I7c9361caf272ea916a3a618ee2b72a6142ffc80c Reviewed-on: https://review.coreboot.org/c/coreboot/+/39366 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-10mb/libretrend/lt1000: Add Libretrend LT1000 mainboardMichał Żygowski
Change-Id: I32fc8a7d3177ba379d04ad8b87adefcfca2b0fab Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30360 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-03-10mb/protectli/vault_kbl: Add FW6 supportMichał Żygowski
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I03e8e8db5d827fe113280f2a6376d364edf42870 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33839 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-03-10mb/intel/tglrvp: add CNVi ASL entry for dynamic SSDT generationSrinidhi N Kaushik
This change uses drivers/intel/wifi chip for CNVi device and adds dynamic SSDT entires for CNVi also export wake gpio for CNVi BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board and check for SSDT entries for CNVi Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Icdbffa0c29c9e0849a6a99f8592b6f35c0bb3207 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39315 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-10soc/intel/tigerlake: Enable Hybrid storage modeWonkyu Kim
To use Optane memory, we need to set 2x2 PCIe lane mode while we need to set 1x4 PCIe lane mode for NVMe. The mode can be selected using the FIT tool at build time. By enabling hybrid storage mode in FSP, FSP will set 2x2 PCIe lane mode if Optane memory is detected and the mode is not 2x2 and set 1x4 PCIe lane mode if Optane memory is not detected and the mode is not 1x4 during boot up. The mode is saved in SPI NOR for next boot. BUG=b:148604250 BRANCH=none TEST=Build and test booting TGLRVP from NVMe and Optane Check PCIe lane configuration. Show all the NVMe devices lspci -d ::0108 Show all the NVMe devices and be really verbose lspci -vvvd ::0108 Print PCIe lane capabilities and configurations for all the NVMe devices. lspci -vvvd ::0108 | grep -e x[124] Print all the PCIe information of the device ae:00.0 lspci -vvvs ae: Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I25bc380697b0774cc30ad1b31ad785ee18822619 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39232 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-10mb/google/volteer: set TcssXhciEn to 1Brandon Breitenstein
BUG=144874778 TEST=Built with Volteer recipe and verified USB functionality Change-Id: I6cbdbd8a4f65a0fe19e3fb8d7b60b8b849f104e7 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-10libpayload/corebootfb: Replace obsolete macros FI and CHARSNico Huber
These macros serve no purpose anymore, let's do the substitution manually once and for all. Also update the comment on the macros and fix whitespace on the touched lines. TEST=Checked that there are no changes in compiled code. Change-Id: Ib60f9ab157e2e7d44b551dd4f695a6c25ebeb405 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39379 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-03-10MAINTAINERS: Add 3mdeb as Protectli mainboards maintainersMichał Żygowski
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I03301441bb07e64aeb59e659ab1b22442b73ca1c Reviewed-on: https://review.coreboot.org/c/coreboot/+/39418 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-09libpayload: Add uart/serial driver support for trogdorT Michael Turney
Change-Id: I5be3904298cd88c60dbc6d8d662beeede2abe442 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35960 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-09arch/arm: Use 'print("%s...", __func__)'Elyes HAOUAS
Change-Id: I83fb453344c31f2cfa97bdaf1b8791a7bef97fd7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-03-09mb/google/dedede: Add PCIe Root Port ConfigurationKarthikeyan Ramasubramanian
Add configuration for all the PCIe Root ports and Clock Source. Configure the Root Ports as disabled and clock sources as not used. BUG=None TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I0a1ad7e056907e454a93f51c84e1d99f08b7bdef Reviewed-on: https://review.coreboot.org/c/coreboot/+/39166 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-09mb/google/dedede: Configure EDP_HPD GPIOKarthikeyan Ramasubramanian
This enables display for use by payload. TEST=Build and boot the mainboard. Ensure that the screens displayed by payload are visible. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I5fcd70623b15ae39954242605e75b2c5ce02ff14 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-09mb/google/dedede: Configure EC <-> AP GPIOsKarthikeyan Ramasubramanian
BUG=b:150869661 TEST=Build and boot the mainboard. Trigger apreset from EC console. Trigger reboot from AP console. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I0d6dd0b4264c11f7ee0ef436cc819b0bb92974f7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39325 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-09mb/google/dedede: Add GPIO listKarthikeyan Ramasubramanian
Leave all the GPIOs in not connected state so that they can be configured depending on the use-case. This is done to park the GPIOs in a known safe state. This will also help to ensure that the required GPIOs are configured when the concerned use-cases are enabled. Below GPIOs are configured in Native Function 1 and are required for boot-up. * VCCIN_AUX_VID0 * VCCIN_AUX_VID1 * AP_SLP_S0_L * PLT_RST_L * CPU_C10_GATE_L * GPDs BUG=None TEST=Build and boot the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I5293536f66a6b08c9c2d2a6281684755a0c0b1b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39114 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-09mb/google/volteer: Enable FPMCU on volteerAlex Levin
BUG=b:147500717 TEST=none Change-Id: I32fa27b399127dbf8608e0556c77431d2dad652d Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-09mb/google/volteer: change two gpio settingsNick Vaccaro
- declare the FPMCU interrupt to be level-triggered - change EC_PCH_WAKE_ODL gpio to native function mode - corrected spelling of a signal name in a comment BUG=b:144933687, b:148179954 BRANCH=none TEST=none Change-Id: I62da900d0b71139e55b52d06ec09ca25106f73cd Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39337 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-09mb/protectli/vault: Add FW2B and FW4B Braswell based boards supportMichał Żygowski
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I553fd3a89299314a855f055014ca7645100e12e7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-03-09mb/asus/p5g41t-m_lx: Do not set BSEL GPIOs in devicetreeAngel Pons
This mainboard has the FSB BSEL straps wired to SuperIO GPIOs. They are set up in romstage, so it makes no sense to clobber the registers with garbage in ramstage. Tested, my Asus P5G41T-M LX still boots and it does not need a full reset on almost every reboot. Change-Id: I6ea498119df44243ec42e3cb5c2903de32a17373 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39384 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-09mb/asus/p5g41t-m_lx: Correct GPIO directionAngel Pons
Not all GPIO4 pins on the SuperIO are configured as outputs. Change-Id: Idf6350551a91c4c1a25a83e3fb9b1a6722a81c36 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39386 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-09mb/asus/p5qpl-am: Do not set BSEL GPIOs in devicetreeAngel Pons
This mainboard has the FSB BSEL straps wired to SuperIO GPIOs. They are set up in romstage, so it makes no sense to rewrite their values in ramstage. Tested, my Asus P5QPL-AM still boots. Change-Id: Ic47f96d12420ebcc70ab5cea940c4c09620c03ca Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-09soc/intel/braswell/chip.h: Include smbios.h for Type9 EntriesMichał Żygowski
In order to add the smbios_slot_desc for the SMBIOS Type9 entries into the devicetree, and not use numbers but strings like "SlotTypePciExpressGen3X4", smbios.h needs to be included in the static.c. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Id15fe4101d14479b02e536fdf63748a241c02bd3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-03-09drivers/ipmi: Fix buffer double-freeJacob Garber
If reading the data for the asset_tag fails, that buffer should be freed, not the one for serial_number. Change-Id: I2ecaf7fd0f23f2fb5a6aa0961c7e17fff04847f4 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1419481, 1419485 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-093rdparty/libgfxinit: Update submodule pointerNico Huber
Changes allow to use the integrated panel logic (power sequen- cing and backlight control) for more connectors. The Kconfigs GFX_GMA_PANEL_1_PORT and GFX_GMA_PANEL_2_PORT can now be set to any port, e.g. config GFX_GMA_PANEL_1_PORT default "DP3" Now that the panel logic is not tied to the `Internal` port choice anymore, we can properly split it into `LVDS` and `eDP`. This also adds Comet Lake PCI IDs which should still work the same as Kaby and Coffee Lake. Change-Id: I78b1b458ca00714dcbe7753a7beb4fb05d69986b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38921 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-09libpayload: Improve rtc functionsPatrick Rudolph
On Lenovo T500 the RTC readings where wrong, as RTC has different encodings, depending on the statusB register. Support BCD vs binary RTC format and AM/PM vs 24h RTC format. Fixes wrong date and time on Lenovo 500. Change-Id: Id773c33e228973e190a7e14c3d11979678b1a619 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/18498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-09Documentation: Add Montevina ThinkPads common pageEvgeny Zinoviev
- Add a common page about Montevina ThinkPads. - Describe how to disable ME and remove its firmware on these models. - Describe vendor flash layouts. Thanks to swiftgeek for his help when writing this, especially the last paragraph and flash layouts. Change-Id: I85917821efe63fff4b933b6226e99c17b63eb1b9 Signed-off-by: Evgeny Zinoviev <me@ch1p.io> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-09libpayload/corebootfb: Add option to center a 80x25 consoleNico Huber
This makes payloads which are hardcoded to a 80x25 console look much better, e.g. FILO with its "GRUB" user interface. Change-Id: I9f4752328d85d148cd40a0c2337c7191e1d6a586 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38538 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-09libpayload/corebootfb: Keep local copy of framebuffer infoNico Huber
Keeping a local copy of the framebuffer info allows us to make changes, e.g. add offsets. It also avoids trouble with relocation. Change-Id: I852c4eb229dd0724114acb302ab2ed7164712b64 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38537 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-09util/superiotool: Drop one SCH5317 entryAngel Pons
The SCH5317 can have either 0x85 or 0x8c as device ID. However, the former results in false positives on any ITE IT85xx series embedded controller, which has led some people to think that chip was actually in their laptops. Moreover, there is no register dump for the SCH5317. Since nobody has touched this in over a decade, avoid further confusion by dropping the misleading definition. Change-Id: I4d1d34d1b88b878461499e52f1a916ee1e33210d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39376 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-09mb/intel/tglrvp: Add memory config for Tiger Lake UP4Srinidhi N Kaushik
Add LPDDR4 memory configuration for Tiger Lake UP4 platform which includes 1. DQ/DQs Mapping 2. Board id Support 3. SPD indexing BUG=none BRANCH=none TEST= Build TGL UP4 successfully Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Ibbd7036919c1a91ef12049d2af657f0a3597b57e Reviewed-on: https://review.coreboot.org/c/coreboot/+/39365 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-09mb/intel/tglrvp: Add TGL UP4 RVPWonkyu Kim
Add initial TGL UP4 RVP build enviorment BUG=none BRANCH=none TEST= Build TGL UP4 successfully Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Iab7ada0746394539586e7cc159112dc8208fdd7c Reviewed-on: https://review.coreboot.org/c/coreboot/+/39363 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-09vendorcode/intel/fsp/fsp2_0/tgl: Update FSP header for Tiger LakeSrinidhi N Kaushik
Update FSPS header to include HybridStorageMode Upd for Tiger Lake platform version 2457. Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Ib6ac89163c0f7a11910e56b9804e386f8bcf355d Reviewed-on: https://review.coreboot.org/c/coreboot/+/39364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-03-08util/kconfig: Silence warning about _GNU_SOURCEAngel Pons
For some reason, this symbol gets redefined, which causes a warning. Hide the warning by checking whether it is already defined. Change-Id: I70ffc9a799e0b536d6aba7d00f828bd6d915d94c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-07mb/google/volteer: add CNVi ASL entry for dynamic SSDT generationSrinidhi N Kaushik
This change uses drivers/intel/wifi chip for CNVi device and adds dynamic SSDT entires for CNVi also export wake gpio for CNVi. BUG=none BRANCH=none TEST=Build and boot volteer Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Ia8baf1c7b770db23f31383bda46ae8d090468560 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-03-07lib/spd_bin: Add "number" to log messageEric Lai
Correct the missing log. Should be the part number not just part. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I17ac9c6f9545d84645665d3abe1d1613baef4e14 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39353 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-07lib/spd_bin: Extend LPDDR4 SPD informationEric Lai
Follow JEDEC 21-C to extend LPDDR4 SPD information. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I68c9782c543afab4423296fa7ac1c078db5649c3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39352 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-07mb/intel/tglrvp: Add pin mux for CameraWonkyu Kim
Add additional pin mux for I2C3, I2C5 for Camera. These pin muxes were done in FSPs, these pin muxes are for bypassing pin muxes in FSPs. BUG=none BRANCH=none TEST=Build with pin mux bypass FSP and boot tigerlake rvp board and check camera Simple test method to check camera: capture image by below commands from OS console >media-ctl -V "\"Intel IPU6 CSI-2 5\":0 [fmt:SGRBG10/3280x2464]" >media-ctl -V "\"Intel IPU6 CSI-2 5\":1 [fmt:SGRBG10/3280x2464]" >media-ctl -l "\"ov8856 18-0010\":0 -> \"Intel IPU6 CSI-2 5\":0[1]" >media-ctl -V "\"Intel IPU6 CSI2 BE\":0 [fmt:SGRBG10/3280x2464]" >media-ctl -V "\"Intel IPU6 CSI2 BE\":1 [crop:(0,0)/3280x2464]" >media-ctl -V "\"Intel IPU6 CSI2 BE\":1 [fmt:SGRBG10/3280x2464]" >media-ctl -l "\"Intel IPU6 CSI-2 5\":1 -> \"Intel IPU6 CSI2 BE\":0[1]" >media-ctl -l "\"Intel IPU6 CSI2 BE\":1 -> \"Intel IPU6 CSI2 BE capture\":0[1]" >yavta -u -c5 -n5 -I -s 3280x2464 --file=/tmp/frame-#.bin -f SGRBG10 $(media-ctl -e "Intel IPU6 CSI2 BE capture") Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I9ad0e5ed452d2b2e8c674abe2a647a0a9c59188e Reviewed-on: https://review.coreboot.org/c/coreboot/+/39201 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-07cpu/x86/smm: Add smm_size to relocatable smmstubArthur Heymans
To mitigate against sinkhole in software which is required on pre-sandybridge hardware, the smm entry point needs to check if the LAPIC base is between smbase and smbase + smmsize. The size needs to be available early so add them to the relocatable module parameters. When the smmstub is used to relocate SMM the default SMM size 0x10000 is provided. On the permanent handler the size provided by get_smm_info() is used. Change-Id: I0df6e51bcba284350f1c849ef3d012860757544b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-07src/nb: Use 'print("%s...", __func__)'Elyes HAOUAS
Change-Id: I7dd6dd8e8debe1b6419625fca38670be375ef581 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-07mb: Use 'print("%s...", __func__)'Elyes HAOUAS
Change-Id: I4fa89dc1ad4196a61bb0cdfaa0d59dfe4c6fff12 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39231 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-07drivers/usb: Use 'print("%s...", __func__)'Elyes HAOUAS
Change-Id: Id90496ba54d861157343302c2600adf3b4ccd811 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39230 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-07soc/intel/tigerlake: Avoid NULL pointer dereferenceJohn Zhao
Coverity detects pointer dev as FORWARD_NULL. Add sanity check for dev to prevent NULL pointer dereference if dev did not point to the audio device. BUG=CID 1420208 TEST=Built image successfully. Change-Id: I2a62da44c7044f9dc281eae0949f7f7b612ab238 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-07vboot: Upgrade kernel space to v1.0dnojiri
This patch upgrades the kernel space to v1.0 to accommodate EC hash, which is used for CrOS EC's early firmware selection. BUG=chromium:1045217 BRANCH=none TEST=Boot Helios. Verify software sync works. Cq-Depend: chromium:2041695 Change-Id: I525f1551afd1853cae826e87198057410167b239 Signed-off-by: dnojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39137 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-03-07Update vboot submodule to upstream masterdnojiri
Updating from commit id 8b9732f5: 2020-01-28 02:32:08 +0000 - (2lib: Fix struct vb2_hash the way it was meant to be) to commit id 5059062d: 2020-03-05 02:40:39 (EFS: Implement EFS2 and NO_BOOT mode) This brings in 19 new commits. Change-Id: Ic33500921e2c1a6109c24ad36713b41ab6e43de9 Signed-off-by: dnojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39324 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Joel Kitching <kitching@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-07mb/intel/tglrvp: Update display ports for RVPWonkyu Kim
Enable DdiPortBHpd and additional pin muxes for DPs. These pin muxes were done in FSPs, these pin muxes are for bypassing pin muxes in FSPs. BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board and check FSP log or DP port pin mux from pinctl driver. Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Id44cfba696b1a21296278f4de2ad6de8f6bbd63b Reviewed-on: https://review.coreboot.org/c/coreboot/+/39229 Reviewed-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-07mb/google/volteer: add samsung-K4UBE3D4AA-MGCR SPDNick Vaccaro
Add samsung K4UBE3D4AA-MGCR SPD as memory sku id 1. BUG=b:148182234 BRANCH=none TEST=none Change-Id: Ie00c45de4d31856109cda13051a75cfa2c2548f7 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-07mb/lenovo/*/devicetree: Declare device in one line if possiblePeter Lemenkov
Change-Id: I708281f7861110e4abc02948c74affad9fa37053 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-07intel/soc: skl,apl,cnl,icl,tgl: add INTRUDER relevant registersMichael Niewöhner
Add registers that are relevant for the case intrusion detection functionality. Intel documents: 332691-003EN, 335193-006, 341081-001, ... Change-Id: If12d21e8e6721abb877cbbfbbba8f0127a86d96b Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39263 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-07intel/soc: skl,apl,cnl,icl,tgl,common: enable TCO SMIs if selectedMichael Niewöhner
Enable TCO SMIs in common code, if selected by Kconfig. This is needed for the follow-up commits regarding INTRUDER interrupt. Tested on X11SSM-F. Change-Id: If63effe74ac59b5d051a6454bc6375bb89605215 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39262 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-03-07soc/intel/common/block/smm: add Kconfig for TCO SMIMichael Niewöhner
Allow the user to select if TCO shall issue SMIs or not. Change-Id: Id22777e9573376e5a079a375400caa687bc41afb Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39326 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-07chromeos: remove unused constants from gnvs.hJoel Kitching
These constants are not used in coreboot. They can still be found in: depthcharge: src/vboot/util/acpi.h vboot_reference: host/arch/x86/lib/crossystem_arch.c. BUG=b:124141368 TEST=make clean && make test-abuild BRANCH=none Change-Id: I40ad35235c87662a6bcbe6320974a626c6db059e Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39319 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-07chromeos: stop sharing write protect GPIO with depthchargeJoel Kitching
wpsw_boot is deprecated in favour of wpsw_cur. As such, coreboot no longer needs to share "write protect" GPIO with depthcharge. BUG=b:124141368, chromium:950273 TEST=make clean && make test-abuild BRANCH=none Change-Id: I2fcb7f82aa063fd72928171af5cbef0356ba620c Signed-off-by: Joel Kitching <kitching@google.com> Cq-Depend: chromium:2088434 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39318 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-07mb/gigabyte/ga-h61m-s2pv: Add ga-h61m-ds2v as a variantAngel Pons
Took less than 30 minutes, and booted on the first try :) Working: - Native raminit, using two 2GB DDR3-1333 DIMMs - S3 suspend/resume - USB ports and headers - EHCI Debug with an FT2232H - Gigabit Ethernet - Integrated DVI/VGA outputs (libgfxinit) - PCIe x16 for a graphics card - PCIe x1 ports - PS/2 port with a keyboard - SATA controller - Audio outputs, both front and rear - flashrom, using the internal programmer. Tested with coreboot, as well as with the vendor firmware. Backup chip is untested. Untested: - VGA BIOS for integrated graphics init - Audio inputs - Non-Linux OSes - ACPI thermal zone and OS-independent fan control Not working: - Default IFD defines the BIOS region as the entire flash chip. Using 'flashrom --ifd -i bios' is asking for a failed flash! Change-Id: I467f586530e4a3b53a24b66565b5dcab5e33cf46 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37483 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-07mb/asus/p8z77-v_lx2: Add new mainboardAngel Pons
This is an ATX mainboard with a LGA1155 socket and four DDR3 DIMM slots. Porting was done using autoport and then doing a bunch of manual edits. Working: - All four DIMM slots - Serial port to emit spam - PS/2 keyboard - S3 suspend/resume - Rear USB ports - Integrated graphics (libgfxinit) - HDMI and VGA - All PCIe ports - Realtek GbE (coreboot must set the MAC address) - Both PCI ports behind the ASM1083 PCI bridge - SATA ports - Native raminit - Flashing with flashrom - Rear audio output - VBT - SeaBIOS to boot Arch Linux Untested: - PS/2 mouse - The other audio jacks - EHCI debug - Front USB headers - Non-Linux OSes Change-Id: Ia5d9176b6f435977ecdd4fc82fc4bc0974d8d6a4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39299 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-07mb/intel/tglrvp: Add fixed SKUID to SMBIOS tablesWonkyu Kim
Report fixed SKUID (255) to support mosys. BUG=none BRANCH=none TEST=boot tigerlake rvp board and check mosys and SKUID from smbios Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I7a5beed307fd7880a6af127b2dcd06e93e50547d Reviewed-on: https://review.coreboot.org/c/coreboot/+/39269 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-07soc/intel/braswell: Generate microcode binaries from treeMichał Żygowski
Automatically add microcode binaries from intel-microcode 3rdparty respository for Braswell processors using Makefile. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Iec57e4d5cd63b9bccc869bf178053f1c99b81b9d Reviewed-on: https://review.coreboot.org/c/coreboot/+/39320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2020-03-07lib/spd_bin: Fix grammar mistake in a commentAngel Pons
Change-Id: I0a9ec0f9605282cbf4fd0ac05070278a3331b6fa Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39361 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-07util/scripts/gerrit-rebase: Improve error messagePatrick Georgi
I received feedback that people were confused by "Error: foo", so replace it with something more user friendly that serves the same purpose. Change-Id: I17b902a62020109e079437c8d9ffd7ea5979a3a1 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39274 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-06util/autoport: Remove redundant commentAngel Pons
Nobody needs "LPC bridge PCI-LPC bridge". Change-Id: Iac833d4fa34b00d89bdfc9aeb06a96583840b900 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-06drivers/broadcom: Add ASPM blacklistAngel Pons
The Broadcom BCM5751 NIC on a PCIe card will make the computer hang if ASPM gets enabled. Blacklist it. Change-Id: I2cf8d56e9139928a6acfd1d09e47a96b9554fb06 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39193 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-06northbridge: Remove unused include <device/pci.h>Elyes HAOUAS
Change-Id: I942457a820a59428f7ae302262c4891a4c5ef1a6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37520 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-06soc/intel/tigerlake: Enable CNVi ModeSrinidhi N Kaushik
Add configs to enable CNVi mode and CNViBtCore. BUG=none BRANCH=none TEST=Build and boot tglrvp Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Ic372348a1409b2594a85b71b2fc742be96b84b87 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39317 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: caveh jalali <caveh@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-06mb/google/kahlee/nuwani: Create Nuwani variantPeichao Wang
This commit creates a nuwani variant for Grunt. The initial settings override the baseboard was copied from variant treeya. BUG=b:144890301 TEST=emerge-grunt coreboot Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: Id3a7fc890340e5a88ebc4b516dc2c0b085654999 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39316 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-06mainboard/ocp: Add support for OCP platform TiogaPassJonathan Zhang
OCP platform Tiogapass is a 2-socket server platform, which is based on a chipset including Intel Skylake-SP processors and a Lewisburg PCH. Skylake-SP is a processor in Intel Xeon Scalable Processor family. Following ACPI tables are added: DSDT/SSDT, MADT, FACP, FACS, HPET, MCFG, SLIT, SRAT, DMAR This patchset is tested on a Tiogapass board. It booted with Linux kernel 4.16.0; lscpu command shows all 72 cpus (2 sockets, 18 cores, 2 thread per core); ssh command shows networking is up from Mellanox ConnectX-4 PCIe NIC card. Towards successful gerrit buildbot build, note that: * microcode is in coreboot intel-microcode submodule repo. * IFD binary is included in this patch. * Dummy ME binary is used, as it may take long time for Intel ME binary to be available in public domain. * Fake FSP binary is used, as at this moment the SKX-SP FSP binary is not going to be available in public domain. Known issues (Not intend to address in this initial support for Xeon-SP processors): * c6 state is not supported. * dsdt table is not fully populated, such as processor/socket devices, some PCIe devices. * SMM handlers are not added. Following are some command execution with CentOS booted from local SATA disk: [root@localhost ~]# lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 72 On-line CPU(s) list: 0-71 Thread(s) per core: 2 Core(s) per socket: 18 Socket(s): 2 NUMA node(s): 2 Vendor ID: GenuineIntel CPU family: 6 Model: 85 Model name: Intel(R) Xeon(R) Gold 6139 CPU @ 2.30GHz Stepping: 4 CPU MHz: 140.415 BogoMIPS: 4626.46 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 1024K L3 cache: 25344K NUMA node0 CPU(s): 0-17,36-53 NUMA node1 CPU(s): 18-35,54-71 [root@localhost ~]# ifconfig eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 172.23.68.190 netmask 255.255.0.0 broadcast 172.23.255.255 inet6 2620:10d:c082:9063:268a:7ff:fe57:5af0 prefixlen 64 //cut inet6 fe80::268a:7ff:fe57:5af0 prefixlen 64 scopeid 0x20<link> inet6 2620:10d:c082:9063::5d2 prefixlen 128 scopeid 0x0<global> ether 24:8a:07:57:5a:f0 txqueuelen 1000 (Ethernet) RX packets 84249 bytes 6371591 (6.0 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 8418 bytes 748781 (731.2 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 613 bytes 63906 (62.4 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 613 bytes 63906 (62.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 [root@localhost ~]# cbmem 36 entries total: // Lines were cut to avoid checkpatch.pl warnings Total Time: 96,243,882,140,175,829 Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com> Tested-by: johnny_lin@wiwynn.com Change-Id: I29868f03037d1887b90dfb19d15aee83c456edce Reviewed-on: https://review.coreboot.org/c/coreboot/+/38549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2020-03-06soc/intel: Add Intel Xeon Scalable Processor supportJonathan Zhang
This patch adds support for Intel Xeon-SP. This patch is developed and verified with Skylake Scalable Processor, which is a processor in Xeon-SP family. The code is expected to be reusable for future geneations of Xeon-SP processors, and will be updated with smaller targeted patches accordingly, to add support for additional Xeon-SP processors, to add features, and to improve the code base. The Skylake-SP FSP is based on FSP 2.0. The FSP is a proof-of-concept build. The binary is not shared in public, when this patch is upstreamed. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com> Tested-by: johnny_lin@wiwynn.com Change-Id: Idc9c3bee17caf8b4841f0bc190cb1aa9d38fc23e Reviewed-on: https://review.coreboot.org/c/coreboot/+/38548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2020-03-06vendorcode/intel/fsp/fsp2_0/skylake_sp: update header filesJonathan Zhang
Added definitions in FspmUpd.h. Added gpio_fsp.h file which has definitions needed by mainboard gpio header file, to set gpio configuration through FSP-M UPD. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com> Tested-by: johnny_lin@wiwynn.com Change-Id: I72727952685b5e453f4cde6c2e7e7fc7114c6884 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrey Petrov <anpetrov@fb.com>
2020-03-06ec/google/chromeec: Fix dev ops for chromeecFurquan Shaikh
CB:38541 ("ec/google/chromeec: Add SSDT generator for ChromeOS EC") added a new device_operations structure for chromeec for handling ACPI SSDT generation. However, this resulted in the original device_operations which handled lpc read resources to be skipped. This change fixes the above regression by combining the device operations for reading resources and ACPI SSDT generation into a single structure and retains the old logic for enabling of pnp devices. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I3a242f4b15603f957e0e81d121e5766fccf3c28d Reviewed-on: https://review.coreboot.org/c/coreboot/+/39321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-06soc/intel/common/block/tco: clear TCO1_STS register, tooMichael Niewöhner
The register TCO1_STS is never cleared, which will cause SMIs to either retrigger over and over again (e.g. TIMEOUT) or prevent concurrent interrupt events, depending on which event triggered. Clear both TCO2_STS and TCO1_STS. This also fixes the issue where SECOND_TO_STS will always end up set in the SMI handler by unconditionally (re)setting it. Tested on X11SSM-F, where enabling TCO caused the terminal to get flooded with SMI debug messages. With this patch, a message gets written every ~1 second. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Ia57c203a672fdd0095355a7e2a0e01aaa6657968 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39259 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Andrey Petrov <anpetrov@fb.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-06mb/lenovo/x230: List Lenovo X230t convertible/tablet as variantPeter Lemenkov
Lenovo ThinkPad X230t Convertible Laptop works well with X230 default image (see CB:34361). Change-Id: Ib0a73fd551f0d26c789d3fd13541b2d1571742cb Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38482 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-06mb/lenovo: Remove thermal.h headerPeter Lemenkov
We include it only in one file. So let's simplify everything and do like autoport does. Change-Id: I71f092ed7582b4931122d72f41d0b42a7569b96e Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-06mb/intel/tglrvp: Enable Audio AIC with Max98373 & ALC5682 on TGLSrinidhi N Kaushik
Add support for Max98373 speaker amp & ALC5682 headset codec BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I013dbc6246b07a501f9bff80c2bca3594e6cc146 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-03-06soc/mediatek/mt8183: Improve the DRAMC runtime config flowHuayang Duan
Move channel loop at the top level to deduplicate the logic. BUG=none BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: Iea623d1bd1f7d736e81f66f191a1bf8476d30404 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-03-06soc/mediatek/mt8183: Do TX tracking for DRAM DVFS featureHuayang Duan
The TX window will offset to edge during DVFS switch, which may cause TX data transmission error and random kernel crash. Therefore, use the standard dqsosc (DQS Oscillator) for TX window tracking. BUG=b:142358843 BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: Idcf9213a488e795df3faf64b03588cfe55cb2f81 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-03-06soc/mediatek/mt8183: Correct EMI bandwidth threshold for DVFS switchHuayang Duan
Because eMCP and discrete DDR devices have different DVFS tables, their EMI bandwidth thresholds should also be different. When the EMI total bandwidth reaches the threshold, the system will notify DVFS module to perform DVFS switch for system performance in low power states. This patch increases the threshold from 0xa to 0xd for eMCP DDR devices so that DVFS switch will be less likely to happen. The register table of EMI_BWCT0 is incorrect in the datasheet. According to the hardware design, BW_2ND_INT_BW_THR should be in bits [30:24] instead of [22:16]. However, the logic in DRAM driver is correct, aligned with the hardware design, so we don't need to correct it. BRANCH=kukui BUG=b:142358843 TEST=bootup pass Change-Id: I82c3c70bcd90df3fdd613c0353aba0f176bc82bc Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39034 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-06mb/up/squared: move USB config to device treeMaxim Polyakov
Change-Id: Ic4db37112e7b2329f9e4885139deca12557ffe3a Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39134 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-06mb/up/squared: remove NpkEn option from romstageMaxim Polyakov
There is no need to set the NpkEn option to disable the NPK device, since it has already been done in the devicetree. Change-Id: I429f1129dc4149067503cd2ff9fb4c76cdc919f0 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-06soc/apl: add options to override USB port configMaxim Polyakov
Allows to override the PortUsb20Enable and PortUsb30Enable FSP options (which are set to 1 by default) to enable/disable USB ports if the usb_config_override flag is set to "1". Therefore, these changes will not affect other boards with an Apollo Lake processor. Change-Id: Ia94a2be1647f7743ef0c918ae3b34437a179261c Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38815 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-06mb/google/volteer: add new ripto variantNick Vaccaro
Add a new ripto variant based off of the volteer baseboard design. BUG=b:148385924, b:150810535 TEST="emerge-volteer coreboot chromeos-bootimage", flash ripto image and verify ripto boots to the kernel. Change-Id: If7606588147500a465f16c7846e2c8429ece93ec Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: caveh jalali <caveh@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
2020-03-06mb/google/volteer: make variant_early_gpio_table weakNick Vaccaro
Declare variant_early_gpio_table() weak to allow override by variants. BUG=b:148385924, b:150810535 TEST=none Change-Id: Ife5e3b75256f71ecd763c4000fd2c7d7c927bb64 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39300 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: caveh jalali <caveh@chromium.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-06mb/lenovo/*: Add support for VBOOT on 12MiB devicesJonas Moehle
Enable VBOOT support on all devices that have a 12 MiB flash, using RW_MAIN_A + RW_MAIN_B partition, allowing the use of tianocore payload in both RW_MAIN_A, RW_MAIN_B and WP_RO. * Add VBNV section to cmos.layout * Add FMAP for VBOOT * Select Kconfigs for VBOOT * Enable VBOOT_SLOTS_RW_AB by default The VBNV is intentionally not covered by the CMOS checksum. Tested on x230 and T440p. Change-Id: I8a35a06ece1e9d57a2ef23970e61ae26fafce543 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Jonas Moehle <ad-min@mailbox.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-03-06nb/intel/haswell/peg: Add PEG driver stubChris Morgan
This is a port of https://review.coreboot.org/c/coreboot/+/22337 to the Haswell northbridge. This code is necessary to support the dGPU of the t440p. Code was cut and pasted from Sandy Bridge with vendor IDs updated to the correct Haswell values. Tested on t440p with dGPU on Ubuntu 18.04.4 with 5.3.0-28 kernel. Without patches dmesg reports Nouveau is unable to read the VBIOS of the dGPU as it has an invalid checksum (I checked that the ROM in CBFS is correct). With this patch DRM works correctly with both the Nouveau driver and the Nvidia proprietary driver. Windows 10 1909 also tested but generates bluescreen once GPU driver is loaded. Change-Id: Ie5f089fb6fd774e6c61f4f9281e2945bd44edf27 Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-03-06sb/intel/common/firmware/Makefile.inc: use ifdtool --output flagMarcello Sylvester Bauer
Use the ifdtool --output flag to modify coreboot.pre inplace, instead of using the `mv` command to get the same result. In this way the stdout will make more sense in the build context. Change-Id: I6dacc8b39052801c770c02fa2aa1b526747ae496 Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39275 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-06soc/intel/tigerlake: Avoid NULL pointer dereferenceJohn Zhao
Coverity detects pointer dev as FORWARD_NULL. Add sanity check for dev to prevent NULL pointer dereference. BUG=CID 1353148 TEST=Built and boot up to kernel. Change-Id: Ic0ad1ec79c950a3c17feccdde4f87f4a107fe8c0 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39260 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-06Revert "i82371eb: Drop support for older PIIX chips"Patrick Georgi
This reverts commit 2b9004de602f98a404b17584ab3e1451f165c1f4. Reason for revert: QEMU emulates that chipset and with that commit a Linux guest kernel can't find IDE devices anymore. Change-Id: Iad75af4ea9993d6a2ec5433ad30d39900dab874e Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Keith Hui <buurin@gmail.com>
2020-03-06src/arch/x86: Convert to SPDX license headerPatrick Georgi
This also drops individual copyright notices, all mentioned authors in that part of the tree are listed in AUTHORS. Change-Id: Ib5a92bb46ff2b9d2928aae3763daec71747044c2 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39284 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-03-06src/arch/riscv: Convert to SPDX license headerPatrick Georgi
This also drops individual copyright notices, all mentioned authors in that part of the tree are listed in AUTHORS. Change-Id: I770c1afd9b68a40ec0e69818f24b5ef3ad4f1d35 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39283 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-03-06util/lint: Add BSD-4-Clause-UC to acceptable licensesPatrick Georgi
While a 4 clause BSD license "with advertising" is incompatible to the GPL, the University of California declared the problematic clause null and void. See ftp://ftp.cs.berkeley.edu/pub/4bsd/README.Impt.License.Change Change-Id: I4ebb822f64989a5fc8f686e548a94653508d1113 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-06src/arch/ppc64: Convert to SPDX license headerPatrick Georgi
This also drops individual copyright notices, all mentioned authors in that part of the tree are already listed in AUTHORS. Change-Id: I19b1c379b474dd011e2d0f8c8202ff1351c9290d Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39281 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-06src/arch/arm64: Convert to SPDX license headerPatrick Georgi
This also drops individual copyright notices, all mentioned authors in that part of the tree are already listed in AUTHORS. Change-Id: Ic5eddc961d015328e5a90994b7963e7af83cddd3 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39279 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-06src/arch/arm: Convert to SPDX license headerPatrick Georgi
This also drops individual copyright notices, all mentioned authors in that part of the tree are already listed in AUTHORS. Change-Id: Ic2bab77edaf7ad97b7f3278cb108226a18cf3791 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-03-06mb/google/hatch/puff: Enable VBOOT_EC_EFSSam McNally
If the ChromeOS EC uses EC early firmware selection (EFS), the AP vboot build must also enable EC EFS. Puff EC uses EFS, so enable it in the AP vboot build. BUG=b:150742950 TEST=Puff can boot with EC EFS with hardware write protect enabled BRANCH=none Signed-off-by: Sam McNally <sammc@chromium.org> Change-Id: I0877000b7d277106436831f2d69775c25299da9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/39273 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-06security/vboot: Support enabling EC EFS with EC software syncSam McNally
If the ChromeOS EC uses EC early firmware selection (EFS), the AP vboot build must also enable EC EFS. Add an option to control this, passing it through to vboot. BUG=b:150742950 TEST=none BRANCH=none Signed-off-by: Sam McNally <sammc@chromium.org> Change-Id: I697e90748e19d15af154011413b30c0f2a0bf52e Reviewed-on: https://review.coreboot.org/c/coreboot/+/39272 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-03-05Revert "acpi: Bump FADT to revision 6"Matt DeVillier
This reverts commit c8b0f31ca1b6cae993736d47d919080b6c186c6f. Bumping the FADT table version from 3 to 6 causes Windows 10 to BSOD with an ACPI BIOS error or simply fail to boot on multiple platforms (Haswell, Broadwell, Braswell, Skylake). Revert until the issue can be properly identified and corrected. Change-Id: I261d953321df2616a3f1c3460a535b57a8848315 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-04soc/intel/denverton_ns: Allow including microcodeFelix Singer
Signed-off-by: Felix Singer <felixsinger@posteo.net> Change-Id: Iaa295c74e9c470d5830e22d0b0c73013c7333293 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39266 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-04soc/intel/cpu: Select NO_FIXED_XIP_ROM_SIZEArthur Heymans
The cache as ram code will use one form of a non-eviction mode. Change-Id: I418eb48434aa3da3bf5ca65315bb8c9077523966 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36239 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-04util/lint: use env to locate the bash binaryIdwer Vollering
Otherwise there will, after make gitconfig, be (hidden) shell command failures with 'git commit -s': gmake: util/lint/check-style: Command not found gmake: *** [Makefile.inc:632: check-style] Error 127 Change-Id: I3891dee53702ee10e5e44dae408193e49d7a89f1 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38227 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-04util/gitconfig: Fix commit-msg for BSD grepPatrick Elsen
BSD grep (on macOS) doesn't like repeated repetition operators, it throws the error grep: repetition-operator operand invalid This removes the superfluous repetition operator to make the commit-msg hook work on macOS and other platforms not using GNU grep. Change-Id: Id0f57d0f14634f7844b889d71342b2982fcadeb2 Signed-off-by: Patrick Elsen <pelsen@xfbs.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>