summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-12-10drivers/generic/gpio_keys: Add mechanism to configure GPE wake eventKarthikeyan Ramasubramanian
Add mechanism to configure GPE wake event which in turn can be used as ACPI Power Resources for Wake BRANCH=octopus BUG=b:117953118 TEST=Ensure that the wake GPE event is added to ACPI Power Resource for Wake. Change-Id: Iacc12b8636aaac98a8689a211cbe1dcfe306f342 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/30106 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-10mb/google/sarien: Update GPIOs for next buildDuncan Laurie
Update the GPIOs for the next board build. Mostly minor changes but the polarity change on GPP_E8/RECOVERY on sarien will result in it booting to recovery every time unless using new hardware. For this reason the recovery mode GPIO that is passed to vboot is commented out for sarien. It is only used for testing and currently it is useful to have an image that works on both board versions. Change-Id: I32d84f3010cb4d3968370a03f7e191b1710a50e8 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30062 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-10mb/google/sarien: Setup GPIOs again after FSP-SDuncan Laurie
Currently CoffeeLake FSP is incorrectly modifying GPIO pad configuration if specific UPD variables are not set as it expects. This affects the display-related SOC pads with the following UPD variables: UINT8 DdiPortBHpd; // GPP_E13 UINT8 DdiPortCHpd; // GPP_E14 UINT8 DdiPortDHpd; // GPP_E15 UINT8 DdiPortFHpd; // GPP_E16 UINT8 DdiPortBDdc; // GPP_E18/GPP_E19 UINT8 DdiPortCDdc; // GPP_E20/GPP_E21 UINT8 DdiPortDDdc; // GPP_E22/GPP_E23 UINT8 DdiPortFDdc; // GPP_H16/GPP_H17 Until FSP is fixed to not touch the pad configuration this workaround will reprogram the GPIO settings after FSP-S step so they are correct when the OS attempts to use them. This was found in CoffeLake FSP Gold release: https://github.com/IntelFsp/FSP/tree/master/CoffeeLakeFspBinPkg As well as the current top-of-tree for the FSP sources. BUG=b:120686247,chromium:913216 TEST=verify correct GPIO configuration for GPP_E group in the kernel Change-Id: I19550c4347cf65d409de6a8638619270372c4d0a Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-10soc/intel/cannonlake: Fix GPIO reportingDuncan Laurie
The kernel GPIO driver only expects some GPIO communities to be exported in the _CRS and it will not work correctly if the other communities are exported. CNL-LP: GPIO communities 0, 1, 4 CNL-H: GPIO communities 0, 1, 3, 4 Additionally one of the pin offset values was incorrect in GPIO community 1 for CNL-LP. This doesn't have any specific failure mode but it was found when auditing the GPIO code. Details of the kernel expected map can be found in the linux kernel at drivers/pinctrl/intel/pinctrl-cannonlake.c BUG=b:120686247 TEST=check /sys/kernel/debug/pinctrl/INT34BB:00/pins to ensure that pins >= 198 are not reading all zeros for the pin config registers. Change-Id: Ie1a2f3b9f9f4b24a9fc57e468dee50e99753912f Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-09mb/google/octopus/phaser: Fix trackpad GPE wake configurationKarthikeyan Ramasubramanian
Synaptics Trackpad wake event is incorrectly routed to GPE0_DW2_02. The concerned GPIO is not connected and hence wont trigger a wakeup. Fix the GPE wake configuration for synaptics trackpad. BUG=b:120666158 BRANCH=octopus TEST=Ensure that the wake on trackpad works with Synaptics touch pad. Ensure that the system can enter S0ix successfully(run suspend_stress_test -c 25). Change-Id: I87b8c266266280f61700839d428e6f8938b0f72f Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/30105 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-09libpayload: Don't try to use invalid row countMartin Roth
console->scroll_up() was hanging when console->rows is 0. This was happening on delan if no screen was attached. If there are no rows, just return. BUG=b:119234919 TEST=Boot delan with no flat panel. System boots to OS Change-Id: Ib022d3c6fc0c9cf360809dca28761a50c787304a Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/c/30092 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2018-12-09mb/google/sarien: Enable LAN clock source usageLijian Zhao
FSP defined a special clock source usage 0x70 for PCH LAN device, update that to google sarien platform. BUG=b:120003760 TEST=Boot up into OS, ethernet able to be listed in ifconfig. Change-Id: I9f945be4f0ce15470ab53f44e60143f3fd0fddf8 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-08google/grunt: Update micron-MT40A1G16KNR-075-E.spd.hex SPD file ModuleLucas Chen
Part Number Correct Ram_ID=0b0011 SPD Module Part Number to "MT40A1G16KNR-075:E" from "4ATS1G64HZ-2G6E1". BUG=b:120000816 BRANCH=master TEST=mosys memory spd print all Change-Id: I9d582b3753de9a48865eb6eca7e4fbdb31b799ff Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-12-07google/grunt: Update hynix-H5AN8G6NAFR-UH.spd.hex SPD file Module PartLucas Chen
Number Correct Ram_ID=0b0000 SPD Module Part Number to "H5AN8G6NAFR-UH" from "HMA851S6AFR6N-UH". BUG=b:120000816 BRANCH=master TEST=mosys memory spd print all Change-Id: I1f6e885638589a35334a9a8f905af4877c5d1f91 Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-12-07google/grunt: Update micron-MT40A512M16JY-083E-B.spd.hex SPD file ModuleLucas Chen
Part Number Correct Ram_ID=0b0010 SPD Module Part Number to "MT40A512M16JY-083E:B" from "4ATF51264HZ-2G3B2". BUG=b:120000816 BRANCH=master TEST=mosys memory spd print all Change-Id: I6847a55968260cdbc1588ddeb8d23c515ad87920 Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-12-07mb/google/sarien: Enable ISH on arcada, disable on sarienDuncan Laurie
The Intel Sensor Hub was enabled on the wrong variant so this change moves the enable from sarien to arcada. Change-Id: If933623f7dbb45c4805fb61430465236eca19ee8 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30070 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Li1 Feng <li1.feng@intel.com> Reviewed-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-07mb/google/kahlee: Use new VBIOS if liaraRichard Spiegel
A new liara specific VBIOS updating eDP power sequence is available now, Change Kconfig to use it if board is google liara. BUG=b:120534087 TEST=Build liara, booted, tested eDP test compliance. Change-Id: I444cfa0bd755480e006f11c0d692b25b96129c29 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/30090 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-073rdparty/blobs: Update video BIOS to customize release binaryRichard Spiegel
A liara specific VBIOS was released and merged to blobs. Now coreboot need to point to the updated blob, so it can use liara specific VBIOS. Liara Chromebook Stoney VBIOS BRT39865 BRT39865.001 12/05/18,01:13:54 CL#1716128 @ 15.49.0.18 ATOMBuild#436504 Major Changes included: 1. First Stoney VBIOS released to Liara update eDP power up sequence. BUG=b:120534087 TEST=none Change-Id: I3b060b1ccfb311584afd0fb66258eb7cc942408d Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/30089 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-12-07soc/intel/apollolake: Print ME version on exit of BS_DEV_INIT stageKarthikeyan Ramasubramanian
Recently there has been a change to print ME version. But the stage at which the version is printed causes the HECI device to remain in D0 state. This in turn prevents the SoC from entering S0ix state. This change moves printing ME version a little earlier so that the HECI device is put into D0i3 state by FSP and the SoC can enter S0ix state successfully. BRANCH=octopus BUG=b:120571529 TEST=Ensure that the ME version gets printed in BIOS logs. Ensure that the device boots to ChromeOS. Ensure that the device enters S0ix successfully(using suspend_stress_test -c 25). Change-Id: I85bc45003a040c8347f929457792d78a9a077c6c Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/30074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-07riscv: fix non-SMP supportPhilipp Hug
Use CONFIG_CPU_MAX which defaults to 1 instead of CONFIG_RISCV_HART_NUM. The default value of CONFIG_RISCV_HART_NUM was 0 and cause a jump to address 0. Add a die() call to fail gracefully. Change-Id: I4e3aa09b787ae0f26a4aae375f4e5fcd745a0a1e Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/c/29993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Xiang Wang <wxjstz@126.com> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-12-07cbfs: Alert if something goes wrong in cbfs_boot_locate()Nico Huber
Change-Id: I5a3cb41b3a7ff2aa527cc2b40c9d7438474c2f93 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/30084 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-07sb/amd/pi/hudson: Fix UART address mathMarshall Dawson
Correct a build error that occurs when HUDSON_UART is selected. Replace sizeof() of a nonexistent variable with the intended type. This was introduced in bd48b23 "southbridge//hudson: Get rid of void pointer math". BUG=b:118484178 TEST=Build Bettong with Chipset/"UART controller for Kern" Change-Id: Icc0ff9d80c3f5cab9ab837cf1cd0cd8eb0753284 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/30072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-12-07sb/intel/lynxpoint/pcie.c: Fix a mistake in a commentTristan Corrick
The code annotated by the comment is dealing with root port 7, so update the comment to reflect that. It looks like the comment was copied from the root port 3 case, but not updated. Change-Id: I0e27e4453f4c3b2b1b9dffb0c89b71373c6b303e Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/30078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-12-07src/southbridge: Get rid of device_tElyes HAOUAS
Use of device_t is deprecated. Change-Id: Ib4db9c263ff156966926f9576eed7e3cfb02e78a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30045 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-07mainboard/lenovo/t430s: Add ThinkPad T431s as a variantBill XIE
The code is based on autoport and that for T430s Tested: - CPU i5-3337U - Slotted DIMM 2GiB - Soldered RAM 4GiB from samsung (There may be more models here) - Camera - pci-e and usb2 on M.2 slot with A key for wlan - sata and usb2 (no superspeed components) on M.2 slot with B key for wwan - On board SDHCI connected to pci-e - USB3 ports - libgfxinit-based graphic init - NVRAM options for North and South bridges - Sound - Thinkpad EC - S3 - TPM1 on LPC - EHCI debug on SSP2 (USB3 port on the left) - Linux 4.9.110-3 within Debian GNU/Linux stable, loaded from Linux payload (Heads), Seabios may also work. Not tested: - Fingerprint reader on USB2 (not present on mine) - Keyboard backlight (not present on mine) - "sticky_fn" flag in nvram Not implemented yet: - Fn locking in nvram (may not be identical to "sticky_fn") - C-based native graphic init (since T431s has eDP instead of LVDS) - Detecting the model of Soldered RAM at runtime, and loading the corresponding SPD datum (3 observed) from CBFS (the mechanism may be similar to that on x1_carbon_gen1 and s230u, but I do not know how to find gpio ports for that, and SPD data stored in vendor firmware.) Change-Id: Ic8062cacf5e8232405bb5757e1b1d063541f354a Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/c/30021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-07mb/google/sarien: Set initial I2C bus rise/fall timesDuncan Laurie
Provide rise/fall times as measured on existing boards. This will need adjusted for new boards but provides a starting point that makes I2C clocks look reasonable. Tested by measuring I2C bus speed and rise/fall times with a scope. Change-Id: Ic18010f5efc41dcee8925d696767ba2c44e3df4b Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30069 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2018-12-07drivers/i2c/designware: Add soc_clock entry for 216MHzDuncan Laurie
Add an entry to the soc_clock table for a 216MHz clock so that the I2C controller clock is calculated correctly when the I2C bus is used in coreboot. This was tested by measuring the I2C clock speed on H1 I2C bus on a sarien board in coreboot and ensuring it is ~400KHz. Change-Id: I6c3cacdad318a5ce41bc41e3ac81385c2d4f396c Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-07soc/intel/cannonlake: Fix I2C clock inputDuncan Laurie
The input clock for the I2C controllers was set at 133MHz but should really be 216MHz according to the kernel: https://patchwork.kernel.org/patch/10408729/ "Intel Cannon Lake PCH has much higher 216 MHz input clock to LPSS I2C than Sunrisepoint which uses 120 MHz. Preliminary information was that both share the same clock rate but actual silicon implements elevated rate for better support for 3.4 MHz high-speed I2C." This change was tested on a sarien board where an I2C trackpad that was measuring ~700MHz on I2C and is now measuring ~380MHz. Change-Id: I792d1f013da5538a2b8157e2f99b754ca7b6bf70 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30061 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-06rammus: ELAN touchpad I2C special timing requirementkane_chen
According to issue tracker b:119899090. https://partnerissuetracker.corp.google.com/issues/119899090 We modify rammus devicetree.cb .i2c[1] configuration to meet ELAN touchpad I2C special timing requirement. BUG=b:119899090 BRANCH=firmware-rammus-11275.B TEST=emerge-rammus coreboot chromeos-ec chromeos-bootimage Flash FW to DUT, and check touchpad I2C characteristics meet requirement Signed-off-by: YanRu chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Ifeb08c2530e6a7674f23f7d48cefa16cfc59cb13 Reviewed-on: https://review.coreboot.org/c/29922 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-06soc/intel/apl: Warn if CBFS is outside the memory mapped areaNico Huber
As part of the memory mapped BIOS region is covered by SRAM, check that CBFS always fits the effectively mapped region of flash. This is usually taken care of by reserving the SRAM range in the FMAP (e.g. as BIOS_UNUSABLE), but can be missed. Change-Id: If5a5b553ad4853723bf13349c809c4f6154aa5f2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/30055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-06mb/google/sarien/variants/sarien: Enable melf touchscreenChris Zhou
BUG=b:119799550 BRANCH=master TEST=Verify touchscreen on sarien works with this change. Change-Id: I926c988c141628ae2d98206f9eb615d06357a366 Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/29830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-06src/soc/intel/braswell/southcluster.c: Config i8254 timerFrans Hendriks
ISA timer is not configured. Add call setup_i8254(). BUG=N/A TEST=Intel CherryHill CRB Change-Id: If45c4975d147f28a456198ea290efba1c8b0464b Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-06lenovo/h8,thinkpads: Re-do USB Always OnNathaniel Roach
Re-write the UAO handling code as it had stopped working (#171) (the flag was not getting read from the RTC properly in SMM) Remove the SMM code as it's not needed (but EC flag won't be set upon entering S3 now) Set the EC flags on boot the same way other flags are set Document bitwise operators for clarity Propagate changes to other Thinkpads (updated X201 to have 2 bits for the flag as it only had 1) Per Nicola Corna's previous commits, 0x0d is set for "AC only" "AC only" does exhibit different behaviour - the USB port is turned on a few seconds after entering S3, rather than < 1 sec, regardless of AC status Tested on X220 Change-Id: If812cd1ef8fb1a24d7fadbe834f574b40cbcd56a Signed-off-by: Nathaniel Roach <nroach44@gmail.com> Reviewed-on: https://review.coreboot.org/c/29565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-12-06MAINTAINERS: Add myself as a maintainer for boards I've portedTristan Corrick
Change-Id: I41363685bb5c84ce15698f96e58f6a5da9bd2ba2 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/30075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-12-06mb/lenovo/t520/romstage: Remove unused includesPeter Lemenkov
Tested - Lenovo t520 still builds fine with this patch. Change-Id: I82492c071ca760f0790b992acbdb86021f470cfe Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/30043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-05mb/google/sarien: Enable ISHJett Rink
Turn on the ISH in the device tree. BUG=b:120295222 Change-Id: I0ba08c245d050aebc6eb06055690c422ab9b51c6 Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://review.coreboot.org/c/30034 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-05cpu/x86/pae: Fix pointer castsPatrick Rudolph
Required to compile the code in x86_64, even though it's never used. Change-Id: I2be8ad8805804e4da52bdb02ab43cb833402f999 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/29876 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-05sb/intel: Fix pointer castsPatrick Rudolph
Fix some compiler warnings due to pointer to integer conversions with different size. Required for 64bit ramstage. Change-Id: Ibfb3cacf25adfb4a242d38e4ea290fdc3929a684 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/29875 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-05util/scripts/maintainers.go: file: queries are more stable with quotesPatrick Georgi
The gerrit docs aren't very explicit about it, but file:"^foo$" is more robust than file:^foo$. Change-Id: I16c7d972d365cd04ca5fbb78012ad4eaad667be6 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/29781 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-05Documentation/flash_tutorial/index.md: warn about dots painted on ICsMichael Bacarella
I fried my mainboard because I tried to orient my chip by lining a blue dot on the corner of my chip with a dot depicted on the chip datasheet. They apparently have nothing to do with each other, and this is normal. Add warning about this to the docs to hopefully spare others from a similar fate. Signed-off-by: Michael Bacarella <michael.bacarella@gmail.com> Change-Id: Ib634589aaa11f75bde2ef2e13d2cacc4cae19a3f Signed-off-by: Michael Bacarella <michael.bacarella@gmail.com> Reviewed-on: https://review.coreboot.org/c/30028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-12-05sdm845: Add SPI-NOR flash driverMukesh Savaliya
TEST=build & run Change-Id: Ie404faf37617d2ad792310709ca2063f9a372076 Signed-off-by: Mukesh Savaliya <msavaliy@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/25392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-12-05mainboard/google/kahlee: Add romstage GPIO initializationMartin Roth
Move the backlight initialization from bootblock to romstage BUG=b:120436919 TEST=Careena backlight is enabled Change-Id: Ia4993b993d37afaf9e23d6f3316ba91053732f1d Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/c/30039 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-12-05soc/amd/stoneyridge: Run romstage mainboard code before AGESAMartin Roth
This is needed so the next patch can set up GPIOs before AGESA runs. BUG=b:120436919 TEST=Verified romstage mainboard code runs before AGESA Change-Id: I76c035e166cd64382b52dff5ae00a6f115cbac9b Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/c/30038 Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-05google/sarien: Increase BIOS region to 28MBLijian Zhao
Platform have a 32MB SPI chip, so we can increase the bios region from 16MB to 28MB. BUG=b:119267832 TEST=Build and boot fine on sarien platform. Change-Id: I9bc0fa0f662e5ec64e77f2005dbb2e7edb8b2524 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/29945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-05libpayload: Remove unused timer/serial driversJulius Werner
This patch removes several timer and serial drivers (and configs) that were specific to platforms which have been dropped in coreboot. Change-Id: I589ca7f1a3b479f1c2b1b668a175a71583441ac9 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/30029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2018-12-05soc/amd/stoneyridge: Name IO061 in ASL appropriatelyMarshall Dawson
AMD traditionally claims the resource at I/O port 61 for the onboard PC-AT speaker. In later designs, the speaker may be omitted in favor of routing the SPKR signal to the codec. Some systems implement neither, and for those it is not correct to identify the resource as a speaker. Modify the EISAID reported to the OS depending on the system design. The default is that port 61 is reported as reserved. In order to report a speaker, add #define in mainboard//dsdt.asl. TEST=check /proc/ioports and iasl -d for both ways using a Grunt BUG=b:117818432 Change-Id: I33aafb187f9fea7b38aae43c399292c7521fcfc4 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/30037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-12-05src/(device/lib/soc): Remove unused variablesRichard Spiegel
When building grunt with flags set to detect variables that get a value but then are unused, there are 5 instances that causes error (unused variable). In most cases it's enough to simply remove the variable. Other instances, is better to simply use the variables (one instance it's a return value, on the other instance using the variables makes code more readable). BUG=b:120260448 TEST=Build and boot grunt. Change-Id: I0d00fb6a42db20afb34c76b9445a741a57096ead Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/29985 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-05mb/lenovo/x201/dsdt: Remove duplicated includePeter Lemenkov
Change-Id: Ifb08c903e19ef4e93bdc9cbc9844cb1888a8d2fa Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/29811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-12-05mb/lenovo/*/dsdt: Rearrange definesPeter Lemenkov
Sort mainboard-specific defines in the same order as in all other Lenovo boards. This is a purely cosmetic change which just makes diff between boards smaller. Change-Id: I4e379bb727b356fc6010e93de492f6d73f97a750 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/29544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-12-05mb/lenovo/*/dsdt: Move mainboard-specific defines out of ec.aslPeter Lemenkov
Most Lenovo mainboards define their own specific defines in dsdt.asl. Let's make it consistent across all Lenovo mainboards. Tested - builds fine. Change-Id: I03fbeb09b25e42af2dfbb220c0f726e6abb73673 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/29543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-12-05sb/intel/i82801{g,j}x: Remove unused smi.c filesArthur Heymans
Now that all targets featuring these southbridges use SMM_TSEG these files are unused. Change-Id: Ic3a1d790f3595e98a8d33e6e8274cb72ad356a89 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30018 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-05soc/sifive/fu540: Add helper function to get tlclk frequencyJonathan Neuschäfer
tlclk is not specific to the UART block in the FU540, so let's calculate its frequency in clock.c. Change-Id: I270920027f1132253e413a1bf9feb4fe279b651a Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/29335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Hug <philipp@hug.cx>
2018-12-05mb/emulation/spike-riscv: Implement mtime_initJonathan Neuschäfer
This patch lets spike boot to "Payload not loaded" again. Because soc/ucb/riscv/ does not represent a real SoC, but is a dummy directory for emulators, and different emulators might have different memory maps, I moved mtime_init to the mainboard-specific directories for Spike and QEMU. Change-Id: I080f7f81df752e25478bd277637bf894bbee4cb2 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/28873 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx>
2018-12-05google/kukui: Support TPMTristan Shieh
Init SPI bus 0 to connect TPM, configure interrupt type of GPIO CR50_IRQ, implement tis_plat_irq_status(), and set up chromeos GPIO table for TPM interrupt. BUG=b:80501386 BRANCH=none Test=Boots correctly on Kukui. Change-Id: Ieaa6ae65fbfb5ab6323e226e8171dd7a992c3a39 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/29192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-12-05mediatek: Share GPIO external interrupts (EINT) code among similar SoCsChuanjia Liu
Refactor GPIO EINT code which can be reused among similar SoCs. BUG=b:80501386 BRANCH=none TEST=emerge-elm coreboot; emerge-kukui coreboot Change-Id: Ib01b43cf1aa4082d7d968fe1ef82f75e8cf05b8b Signed-off-by: Chuanjia Liu <Chuanjia.Liu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/29837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-12-05soc/intel/baytrail: Implement POSTCAR stageArthur Heymans
Use common code to tear down CAR. Change-Id: I62a70ae35fe92808f180f2b5f21c5899a96c2c16 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-05soc/intel/baytrail: Use postcar_frame functions to set up frameArthur Heymans
Change-Id: I77e375a2ff2fbf1be4ded922195b80b49ffa4cc5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29929 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-05soc/intel/baytrail: Improve CAR setupArthur Heymans
This patch does the following: - improve the style by removing tabs in front of jmp addresses - Make the code for zeroing variable MTRR more readable (copied from cpu/intel/car) - Fetch PHYSMASK high from cpuid instead of Kconfig Change-Id: I6ba67bb8b049c3f25b856f6ebb1399d275764f54 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-05soc/intel/broadwell: Implement postcar stageArthur Heymans
This does the following: - Reuse the cpu/intel/car/non-evict CAR setup and exit. - Use postcar_frame functions to set up the postcar frame Change-Id: I428832a2d7e46ce61a7f9bd498b609feb4518eb0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-05smmstore: make smmstore's SMM handler code follow everything elsePatrick Georgi
Instead of SMMSTORE_APM_CNT use APM_CNT_SMMSTORE and define it in cpu/x86/smm.h Change-Id: Iabc0c9662284ed3ac2933001e64524011a5bf420 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/30023 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-05elog: make elog's SMM handler code follow everything elsePatrick Georgi
Instead of ELOG_GSMI_APM_CNT use APM_CNT_ELOG_GSMI and define it in cpu/x86/smm.h Change-Id: I3a3e2f823c91b475d1e15b8c20e9cf5f3fd9de83 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/30022 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-05drivers/smmstore: Allow using raw FMAP regionsArthur Heymans
Use a raw fmap region SMMSTORE for the SMMSTORE mechanism, while keeping the initial option to use a cbfsfile. TESTED on Asus P5QC, (although it looks like the tianocore patches using it might need some love as they can't seem to save properly). Change-Id: I8c2b9b3a0ed16b2d37e6a97e33c671fb54df8de0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-05soc/intel/common/lpc_lib: Add function to disable LPC Clock RunNico Huber
Needed to fix up FSP-S bug on Apollo Lake. Change-Id: If09fee07debb1f0de840b0c0bd7a65d338665f7c Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-05arch/x86/include/stdint: Fix PRIu64Patrick Rudolph
We alwas define uint64_t as unsigned long long, even on x86_64. Fix PRIu64 to match the definition of the datatype, to prevent compilation errors when compiling for x86_64. Change-Id: I7b10a18eab492f02d39fc2074b47f5fdc7209f3d Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/30002 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-05Documentation/mainboard/lenovo/t420.md: add pic of chipMichael Bacarella
Provide pic of the flash IC with pinouts labeled, as well as additional text about the chip. Signed-off-by: Michael Bacarella <michael.bacarella@gmail.com> Change-Id: I9046fa63dcd4d192836417efac68ca7587ac1c91 Signed-off-by: Michael Bacarella <michael.bacarella@gmail.com> Reviewed-on: https://review.coreboot.org/c/30027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-04mb/google/sarien: Enable WWAN detection on ArcadaLijian Zhao
Set GPIO D22 low to get WWAN_PERST#_R asserted. BUG=N/A TEST=Boot up with Arcada board, check WWAN get detected as USB devices through lsusb command. Change-Id: Ie848cd19fdf3b6c4b6abeb5fa3f566e5e4e7e928 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30030 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04soc/intel/common: Limit BIOS region cache to 16MBLijian Zhao
Cache BIOS region can boost boot performance, however it can't be over 16MB, according to processor EDS vol1(Apollolake/Skylake/WhiskeyLake), FLASH+APIC LT will be less than 20MB under 4G. Set the maxiam to 16GB to save numbers of mtrr entries. BUG=b:119267832 TEST=Build and boot up fine on whiskeylake rvp platform. Change-Id: I46a47c8bf66b14fb2fcb7b6b1d30d02886c450a4 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/29944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04mb/google/poppy/variant/nocturne: adjust RcompTarget to fix DRAM corruptionNick Vaccaro
BUG=b:111812662 TEST=flash to nocturne, boot nocturne, run "memtester 1g" and verify it passes. Change-Id: Iefc3957f915a39a47ad6018459e65b70d1b34091 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/29361 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-04mb/google/sarien: Define USB devices for ACPIDuncan Laurie
Add the USB device information for the sarien/arcada variants. This includes the ACPI _PLD group definitions for the external ports that indicate which USB2 and USB3 ports share the same physical interface. Change-Id: I0b936127954ba09c61ccb871bfc62ee7d99da263 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30000 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04mb/google/eve: Define USB port peersDuncan Laurie
Add ACPI _PLD group definitions for the external ports that indicate which USB2 and USB3 ports share the same physical interface. Change-Id: I7f85720a878a3774d453a9adb82518722f7ba23d Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04acpi_pld: Make it easier to define the ACPI USB device groupsDuncan Laurie
The Linux kernel can use the ACPI _PLD group information to determine peer ports. Currently to define the group information the devicetree must provide a complete _PLD structure. This change pulls the group information into a separate structure that can be defined in devicetree. This makes it easier to set for USB devices in devicetree that do not need a full custom PLD. This was tested on a sarien board with the USB devices defined by verifying that the USB 2/3 ports are correctly identified with their peer in sysfs. Change-Id: Ifd4cadf0f6c901eb3832ad4e1395904f99c2f5a0 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04soc/intel/cannonlake: Add USB device namesDuncan Laurie
Add the ACPI device names for the USB ports to match what is in the DSDT so USB ports can be defined in the SSDT. Change-Id: Ibb323bbd324811fa3178b0cba3d7f0a315169486 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04soc/intel/cannonlake: Increase bootblock sizeDuncan Laurie
Increase the bootblock size to 48K to match skylake. With UART enabled we are very near the 32K limit, and with upcoming changes to add USB devices in devicetree for a cannonlake board it is over the current 32K limit. Change-Id: I155cb0a6af1746af6833fa9f35c2ea6fe0bc709f Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04ec/google/wilco: Turn camera power onDuncan Laurie
Send the EC command required to turn the camera power on and verify that it shows up on the USB bus. Change-Id: I9e9ba712a11cef85cde91ac21a4b6b5090ef58dc Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04mb/google/sarien: Enable DPTFDuncan Laurie
Enable DPTF support for sarien/arcada boards. This is currently using placeholder values that are identical that will be updated after thermal tuning is done. Change-Id: I7d51c3b38068fc25927c8dafc0bd9069b29d77f5 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29762 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04ec/google/wilco: Guard DTPF with ifdefDuncan Laurie
There is a dependency issue with the EC DPTF code accessing methods that are external, but once the mainboard includes the relevant code they become internal and the current version of IASL used by jenkins will fail to compile it. Until the new IASL is deployed everywhere wrap the EC DPTF code and expect that the mainboard will explicitly enable it. Change-Id: I612ad8f86d424060ca0303d267d7c2915c760173 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04ec/google/wilco/acpi: Add DPTF supportDuncan Laurie
Add the support needed for DPTF. This includes the methods to write trip point values, read temperatures, and handle events. This was tested on a sarien board by inspecting AML debug output with the kernel while monitoring temperatures and trip points in sysfs and controlling temperatures with a fan to ensure that when a trip point is crossed an SCI is generated and the event is handled properly. Change-Id: I8d8570d176c0896fa709a6c782b319f58d3c1e52 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29761 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04Documentation: Clarify minor detail on preparing a layout fileMichael Bacarella
The user needs to pass the original firmware image to create a layout file, not the newly compiled coreboot image. Signed-off-by: Michael Bacarella <michael.bacarella@gmail.com> Change-Id: If47a88f06076da12d8da7a873c3e5ef64fc1f877 Reviewed-on: https://review.coreboot.org/c/30024 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04Documentation: Clarify workflow for cloning coreboot from Gerrit.Michael Bacarella
Documentation that was there seems to reference and older version. Signed-off-by: Michael Bacarella <michael.bacarella@gmail.com> Change-Id: I3709613ae065153123d00801ea1b4ff86b100264 Reviewed-on: https://review.coreboot.org/c/30025 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04Documentation: s/My/Your/ in getting started with Gerrit docsMichael Bacarella
Signed-off-by: Michael Bacarella <michael.bacarella@gmail.com> Change-Id: I781e2d78c0525da74dd77f572839d746d3eeb3ce Signed-off-by: Michael Bacarella <michael.bacarella@gmail.com> Reviewed-on: https://review.coreboot.org/c/30026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-12-04ec/google/wilco/acpi: Fix issues and clean upDuncan Laurie
- Disable debug output from read/write methods by default - Use argument to _REG to disable SCI when EC is unregistered - Change read/write macros to sync level 2 so they can be called when a mutex is already held - Define some missing events Change-Id: Ic65ebbb6a6151444c47b4aeff7429e186856c49a Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29760 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04soc/intel/cannonlake: Add DPTF ACPI codeDuncan Laurie
Define the constants that DPTF expects from the SOC in order to use the common DPTF ACPI code. For cannonlake this indicates the CPU device is called B0D4 and is at PCI address 00:04.0. Change-Id: I43c2f8dd7281d3e9f791ab01478ee7823fd6b128 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29759 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04soc/intel/common/dptf: Add method for temp conversionDuncan Laurie
Add a method to convert from 1/10 Kelvin to Celsius. This is useful for EC devices where the sensor temperature are stored in Celsius instead of Kelvin. Change-Id: I6b1154f5ba13416131a029966d6d5c1598904881 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29758 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04soc/intel/common/dptf: Make CPU address a defineDuncan Laurie
In order to support using the common ACPI code on more platforms than just Apollo Lake the DPTF code needs to be told what the PCI address is for the CPU thermal device. Change-Id: I638f2387330bbc42f64eb0fb676ee32c5df6572e Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29757 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04ec/google/wilco: Fix extended event handlingDuncan Laurie
Extended events will be handled by the OS kernel driver, but that driver needs a method exposed by ACPI to read the event data from the EC and into a buffer. Tested by generating a hotkey event and reading the buffer from the Linux kernel driver with acpi_evaluate_object(). Change-Id: Ic8510e38d777a5dd31a5237867313efefeb2b48e Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29674 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04ec/google/wilco: Enable WiFi radioDuncan Laurie
Add EC command to enable WiFi radio and send that command at startup. Tested to ensure WiFi is functional on a sarien board. Change-Id: Iac46895c7118567e1eb55ea33051a1662103b563 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29673 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04ec/google/wilco: Enable COM1 ACPI deviceDuncan Laurie
Enable the COM1 ACPI device based on the existing Kconfig option CONFIG_DRIVERS_UART_8250IO instead of expecting the mainboard to also define another value for ACPI. Change-Id: I69361cc2c245cfcad3e4f57567bf56d5a26f0b06 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29672 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04mb/google/sarien: Enable WWAN detectionAmanda Huang
Set WWAN_GPIO_PERST#(GPP_D22) to low at bootblock stage to meet the logic output for WWAN_PERST#_R to high. BUG=120004153 TEST=Boot up Sarien board, check WWAN get detected as USB devices through lsusb. Change-Id: I16f1101c64dfd4dcb5e8342fdb925951f6f2f90b Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-04soc/sifive/fu540: Load PLL settings from a structJonathan Neuschäfer
The different PLLs in the fu540 use the same register layout, so use one function (configure_pll) to program a PLL and wait for it to lock. This also makes it possible to dynamically calculate the PLL settings later. TEST=Boot until "Payload not loaded" on HiFive Unleashed Change-Id: I5c0cee886bad5758c70f967d2bb998c1e1a736ab Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/29356 Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04drivers/intel/fsp1_1/romstage.c: Fix typoFrans Hendriks
Correct typo of 'Initialize' BUG=N/A TEST=N/A Change-Id: I94cfd9c41bb5f9751ef4a18beaeba05108220bc8 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/30016 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04mb/opencellular/elgon: Enable write protectionPatrick Rudolph
* Verify the flash write protection on each boot * Program non-volatile write protection on first boot Tested using I715791b8ae5d1db1ef587321ae5c9daa10eb7dbc. The bootblock is write-protected as long as the #WP pin is asserted low: * Reprogramming of the status register fails. * Trying to write to WP_RO region fails. Programming the WP_RO is only possible if #WP pin is high. Change-Id: I6a940c69ecb1dfd9704b2101c263570bebc5540e Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/29532 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-12-04drivers/spi/winbond: Fix TB bitPatrick Rudolph
The TB has to be inverted to actually protected the correct region. Tested on elgon using I67eb4ee8e0ad297a8d1984d55102146688c291fc. Change-Id: I715791b8ae5d1db1ef587321ae5c9daa10eb7dbc Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-12-04mb/google/poppy/variants/nami: update bard/ekko sku idsRen Kuo
update the new sku ids of bard/ekko BUG=b:120257865 BRANCH=Nami TEST=emerge-nami coreboot chromeos-bootimage write the new sku id in cbi and verify the fw to check it can get the correct settings by the sku id Change-Id: I3579d3d8042a270d8ea8e2f7b5612ff8e2cdfa7b Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/30031 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03mb/google/octopus: Enable mode change as wake source from S3/S0ixFurquan Shaikh
This change enables mode change as a wake source from S3 and S0ix. Thus, any time the device switches between clamshell and tablet mode while it is suspended, it will be treated as a valid user event and hence wake source. BUG=b:120349473 BRANCH=octopus TEST=Verified that octopus wakes up on mode transitions. Change-Id: Ib224df434730f873ce5514303e5d043cbc85a9a4 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/30001 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2018-12-03soc/intel/apl: Enable graphics with libgfxinitNico Huber
Backlight control of internal panels likely won't work as configuration for that seems absent in coreboot. Also, libgfxinit doesn't support any MIPI/DSI connections, yet, and neither Gemini Lake. TEST=Booted work-in-progress port kontron/mal10 with VGA text and linear framebuffer modes. DP display came up. Change-Id: I7b111f1cdac4d18f2fc3089f57aebf3ad1739e5d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29903 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03cpu/intel/fsp_model_406dx: Drop dead microcode referenceNico Huber
The referenced Kconfig symbols don't exist (anymore?). Change-Id: Ia724262a526fe960c17ae4b248acfa42fc342331 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Guckian Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-12-03sb/intel/i82801jx: Fix the x_pm2_cnt_blk addrlArthur Heymans
Removes a warning in Linux about FACP. Change-Id: Ia12302a4dcd34eacdcc8ae16bd39e951e616c6ea Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-03soc/intel/apollolake: Add support to print ME versionFurquan Shaikh
This change adds support to print ME version if UART_DEBUG is enabled. Check for UART_DEBUG is necessary because talking to ME to get the firmware version adds ~0.6 seconds to boot time. TEST=Verified on octopus that ME version printed is correct. Change-Id: I41217371558da1af694a2705e005429155d62838 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/29989 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03smmstore: update smm store filename to use an underscoreJoel Kitching
Rename "smm store" to "smm_store". BUG=b:120060878 TEST=None Signed-off-by: Joel Kitching <kitching@google.com> Change-Id: If70772e17cc1668a28b376eeccfde0424e637b1a Reviewed-on: https://review.coreboot.org/c/29854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-03soc/amd/stoneyridge: Use new ACPI MMIO functionsRichard Spiegel
Replace IO access to ACPI registers with the new MMIO access functions. BUG=b:118049037 TEST=Build and boot grunt. Test ACPI related functionality. Change-Id: I7544169bb21982fcf7b1c07ab7c19c6f5e65ad56 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/29296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-12-03soc/amd/stoneyridge: Create MMIO offsets for ACPIRichard Spiegel
ACPI registers can be accessed through IO or through MMIO. However, the offset relationship is not one to one. Therefore, definitions with the correct offset for MMIO access are needed. BUG=b:118049037 TEST=Use Chrome OS IOTOOLS io_readxx and mem_readxx to find the correct relationship between ACPI IO and ACPI MMIO. Change-Id: Id20754c0fc0af35bc9eb1a4b40c62fbf9ed6304d Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/29294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-12-03mb/asus/am1i-a: add missing GPIO IO portsKevin Cody-Little
This makes the mainboard able to boot again. Change-Id: Id96fbfd5c815431dba2f030fca62a5ea16b97393 Signed-off-by: Kevin Cody-Little <kcodyjr@gmail.com> Reviewed-on: https://review.coreboot.org/c/29994 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03MAINTAINERS: Add myself as some mainboards' maintainerAngel Pons
Add myself as a maintainer of the four mainboards I ported. For those which were added as a variant, add myself as a maintainer of the whole mainboard group. Change-Id: I0e1b54279027fae82ea9f2825e6f27d38ef3c746 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/29995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-03mb/sifive/hifive-unleashed: Use if (IS_ENABLED(...))Jonathan Neuschäfer
"if" is preferable over "#if", because it lets the compiler perform syntax and type checks even if CONFIG_CONSOLE_SERIAL is disabled. Change-Id: I45a763f2d854fbe9082795bc74de7a9d0fded3c9 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/29336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-12-03soc/sifive/fu540: Simplify UART refclk calculationJonathan Neuschäfer
clock_get_coreclk_khz() already detects whether the PLL or the input clock (hfclk) is used. Tested on HiFive Unleashed. Change-Id: I264977b0de0b81ef74a014984b6d33638ab33f4b Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/29334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 15:26:51 +0000