summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-09-08mb/amd/{bilby,mandolin}: Turn empty `chip` entry into commentNico Huber
A chip entry in the devicetree is not hooked up without a device beneath it. It seems the intention was to leave these superio drivers unconfigured, so there should be no harm to turn the entries into comments. Change-Id: I6b606f35eba089b74c562084772d95be41cac39c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-09-08soc/mediatek: preserve WDT reset reason for debuggingFengquan Chen
1. Disable external output reset signal in first WDT reset to preserve WDT original reset reason for WDT issue in kernel stage. 2. After preserved WDT reset reason, do fully reset again by sending external output reset signal. BUG=b:194025005 TEST=boot to kernel ok and function test pass Signed-off-by: Fengquan Chen <fengquan.chen@mediatek.corp-partner.google.com> Change-Id: I5887a8312f4daab3cbd0a30fea0195670a932e52 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-09-08payloads/external/tianocore: Add build argument for 4G DecodeSean Rhodes
Add Kconfig option TIANOCORE_ABOVE_4G_DECODE to pass build option to edk2 to enable or disable "Above 4G Decode". Disabling allows certain Linux distributions to boot such as Qubes, Zorin and Proxmox. Requires commit `2f6d4cbcc7fa49462e607baed7626524ccd59ad3` that is present in the `uefipayload_202107` branch of MrChromebox's edk2 repository. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ia3b1d15196c0ec611431af29031682fea626d19d Reviewed-on: https://review.coreboot.org/c/coreboot/+/56223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2021-09-08soc/amd/common/block/gpio_banks: add comment about acpimmio_* symbolsFelix Held
Suggested-by: Martin Roth <martinroth@chromium.org> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0016a6c7d6581cb261cab6178268c1a86b89c839 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56831 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-08soc/amd/common/block/gpio_banks: inline iomux_read8 and iomux_write8Felix Held
Since both functions are only called from one function each, inline them into those functions. Also get_gpio_mux just returned the return value of iomux_read8, so there were two functions with identical functionality which shouldn't be the case. Suggested-by: Martin Roth <martinroth@chromium.org> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5662d0226edb25a9954fa47b42e208729a79e5a9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56830 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-08soc/amd/common/block/gpio_banks: factor out gpio_mux_ptrFelix Held
This aligns the GPIO MUX access more with the GPIO control register access and will facilitate adding support for the remote GPIO bank. Also change the GPIO number argument type to gpio_t. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4054656c5cc23ea942e8dd370fbbffca304755d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-09-08soc/amd/common/include/acpimmio: reduce visibility of GPIO MMIO accessFelix Held
Introduce amdblocks/acpimmio_legacy_gpio100.h so that the old pre-SoC chipsets can still access the raw GPIO100 and IOMUX ACPIMMIO registers while only allowing GPIO accesses through the GPIO API on the SoCs. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I18872dfa40d53ba8b0d7802eec52ede5e2ae617a Reviewed-on: https://review.coreboot.org/c/coreboot/+/56786 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-09-08soc/amd/common/block/gpio_banks: move GPIO MUX access functionsFelix Held
Move those two functions near the top of the file to have all functions that do the hardware accesses in one place. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If787e6e1d124a932beafd73e5ce7d0ce4869e800 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-08soc/amd/common/block/gpio_banks/gpio: use unsigned types where neededFelix Held
Use unsigned integers for variables that aren't supposed to become negative. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5ee037221b9818b0474fe0376323e522c1b3b516 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-09-08soc/amd/common/block/gpio_banks/gpio: use gpio_t for GPIO numbersFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7cf9cbd2a287dcfe3a47a8a6b164c2b3d8ae95d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56700 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-09-08soc/amd/common: move GPIO ACPIMMIO access functions to gpio_banks blockFelix Held
Since the raw GPIO MMIO register access is now only used inside the gpio_banks block, the gpio_read32 and gpio_write32 functions can be moved to that block to reduce the visibility and enforce the usage of the functions provided by the gpio_banks block. The iomux_read8 and iomux_write8 functions can't be easily moved to the gpio_banks block, since it's also used in the pre-SOC AMD chipsets that use the ACPIMMIO access functions directly. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia0d6dea72c6bebbbe6ce545bedfc74f91e0042c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
2021-09-08soc/amd/common/block/gpio_banks: factor out get_gpio_muxFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7d7a8c5a7188fd558a577352f8b246e61f3edd63 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-09-08soc/amd/common/block/i2c: move raw GPIO access functions to gpio_banksFelix Held
The I2C code should use some GPIO API to access the GPIO registers instead of accessing the GPIO MMIO regions itself. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I84dff381ad86e0c7f879f0f079186aec9cafc604 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-09-08soc/amd/common/block/i2c: use common GPIO API in drive_sclFelix Held
No need to do raw GPIO MMIO accesses when basically the same functionality can be achieved by using existing APIs. Using the existing GPIO API instead of raw GPIO MMIO register accesses allows containing all direct GPIO MMIO accesses inside the common AMD GPIO code which will be done in subsequent patches. Since the value parameter of gpio_set is int, change the type of the val parameter of drive_scl to int as well even though I'm not sure why a signed integer was used for this in the common GPIO API. Since program_gpios already configures the SCL GPIOs as outputs, gpio_set can be used in drive_scl which only sets the output value, but doesn't configure the direction. TEST=The waveform on the SCL pin of I2C3 on a barla/careena Chromebook looks similar to the same as before during the reset_i2c_peripherals call, but due to the additional overhead of the read-modify-write to the GPIO register instead of just a write, the pulse width gets about 50% longer. Since the udelay call in drive_scl still has an open TODO to make this configurable and the pulses being longer is in the safe side, this side-effect can be addressed in a follow-up patch. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic323cebc1c83ecd6f0e1fbab419c69489d77face Reviewed-on: https://review.coreboot.org/c/coreboot/+/56777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-08soc/amd/*/bootblock,early_fch: rework i2c_scl_pins configurationFelix Held
drive_scl in soc/amd/common/block/i2c/i2c.c writes the raw GPIO MMIO configuration register and drives it as output, so don't initially configure the GPIO as input with no pull up/down. This is a preparation to use the common AMD GPIO access functions instead of the raw register accesses, since the gpio_set function only sets the output value, but doesn't reconfigure the direction. Using gpio_output there instead would reconfigure the direction as well, but would result in doubling the number of MMIO accesses, so just configure the GPIOs correctly right away to avoid that. TEST=The waveform on the SCL pin of I2C3 on a barla/careena Chromebook looks exactly the same as before during the reset_i2c_peripherals call. This was probed at the SCL pad of the unpopulated I2C level shifter on the side that is connected to the SoC. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8e94afe0c755a02abcc722d5094e220d8781f8f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56807 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-07mb/google/brya/variants/gimble: update fw_config.c for next build phaseMark Hsieh
Update fw_config.c based on the schematic carbine_adl-p_evt_20210901.pdf BUG=b:190688567 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I240c0cd777d215e46a0a661aaac63a187311019d Reviewed-on: https://review.coreboot.org/c/coreboot/+/57360 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-07mb/google/brya/variants/gimble: add GPP_B4 and GPP_D11 to early_gpio_tableMark Hsieh
NVMe needs extra time to run boot process, enable power and deassert reset for NVMe earlier in the boot flow that gimble can successfully boot into OS with non-serial coreboot. BUG=b:198405404 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: Ib76965db2a6cd0c19be4043fec73af297a619c7b Reviewed-on: https://review.coreboot.org/c/coreboot/+/57359 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-07mb/google/brya/variants/gimble: Enable SaGv supportMark Hsieh
This patch enables SaGv support for gimble. BUG=b:198531517 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I29887418827614afb10558c6958c9c5e9667079e Reviewed-on: https://review.coreboot.org/c/coreboot/+/57357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Marx Wang <marx.wang@intel.com>
2021-09-07mb/google: Add board name comments for each boardMartin Roth
Roughly half the boards had a "title" comment for the board. This adds it for the rest of the boards to make everything consistent. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ib941318842136212727f56fc6130381c5c9cd55b Reviewed-on: https://review.coreboot.org/c/coreboot/+/57390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-09-07mb/google/guybrush/nipperkin: update nipperkin configKevin Chiu
copy config from guybrush reference board. remove wwan & speaker amp due to the different solution is used on nipperkin. BUG=b:194031783 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I58a9b8393a965a9c793802d3e660829863b74375 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57263 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-07mb/asrock/e350m1: Enable USB on mPCIeSebastian 'Swift Geek' Grzywna
Verified by running following on vendor and observing mPCIe USB device (dis)appearing: echo 1 > /sys/bus/pci/devices/0000:00:16.0/remove echo 1 > /sys/bus/pci/devices/0000:00:16.2/remove echo 1 > /sys/bus/pci/devices/0000:00:00.0/rescan Change-Id: I6ee7e3679c9cd87b81f955c68ec89db1dda30aec Signed-off-by: Sebastian 'Swift Geek' Grzywna <swiftgeek@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-07kontron/mal10: Set up GPIOs in CPLD/ECMaxim Polyakov
The COMe module connector implements 8 GPIO lines from the CPLD/EC pins. Use the Kempld GPIO driver[1] to configure these pins in accordance with the COM Express Module Base Specification [2]. TEST = Set different logic states for the pin configured as outputs and check them with an oscilloscope. [1] CB:47595 , Change-Id: Id767aa451fbf2ca1c0dccfc9aa2c024c6f37c1bb [2] page 79-81, PICMG (R) COM.0 Revision 3.0 COM Express (R) Base Specification - March 31, 2017. Change-Id: I7d354aa32ac8c64f54b2bcbdb4f1b8915f55264e Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54380 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-07documentation: add a section on devicetree refsPeter Marheine
There is no existing documentation on how `device ref` and aliases work in the devicetree, and the behavior around devices not being in the same location is difficult to discern as well as somewhat unexpected. This should help prevent confusion leading to bugs such as the one fixed by https://review.coreboot.org/c/coreboot/+/57298 Change-Id: I4b30f7d531cfc3453d6523a76084f1969125b4bf Signed-off-by: Peter Marheine <pmarheine@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57354 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-06drivers/intel/fsp2_0: add warning when ADD_FSP_BINARIES isn't selectedFelix Held
Platforms that rely on the FSP for parts of the hardware initialization likely won't boot successfully when no FSP binaries are added during the build, so print a warning at the end of the build in this case. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Nico Huber <nico.h@gmx.de> Suggested-by: Martin Roth <martinroth@google.com> Change-Id: I6efc184ecc4059818474937fd31574f703c9bdc6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57368 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-09-06autoport: search for the HDA device on PCHIru Cai
Haswell has its Mini-HD device and is at card0, so we need to search for the PCH HD Audio device instead of using card0. Change-Id: I2bc420fdbe9731ae835f63add85db79f04201da4 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34357 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-06inteltool: Support dumping IOBP register valuesIru Cai
This patch also adds LynxPoint and WildcatPoint-LP IOBP registers, which is used to get the USB and SATA configuration values for autoport. Change-Id: I1f11640fdff59a5317f19057476f7e48c2956ab9 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41473 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-06Update vboot submodule to upstream mainThejaswani Putta
Updating from commit id ccc56f4: vboot: add x86 SHA256 ext support to commit id 4423276: crossystem: add a hwid override mechanism from chromeos-config Signed-off-by: Thejaswani Putta <thejaswani.putta@intel.com> Change-Id: I7bd73b9f6c0492f96c336b61e21ecae37b8f3606 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57322 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Thejaswani Putta <thejaswani.putta@intel.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-06mb/intel/shadowmountain: Enable SaGv supportV Sowmya
Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: I15203920546363466eef567136821b59dda763b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54648 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-06mb/lenovo: Use pci_and_config32Peter Lemenkov
Change-Id: I082d31d59660c48065f9390975817d3ed553da2d Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55606 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-06MAINTAINERS: Add myselfNick Vaccaro
Change-Id: Ibfa877fc328d64be4de372fb7f4401717158ed9e Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-06mb/intel: Drop unused `GPIO_MEM_CONFIG_.` definesAngel Pons
These defines are copy-paste leftovers from Kunimitsu. However, neither Saddle Brook nor KBLRVP use memory-down, so drop the unneeded defines. Change-Id: I396aeaa634f619be7be0ee97c0cab1c682f53ff2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57231 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-06mb/intel/kblrvp: Drop redundant overridetree lineAngel Pons
The I2C #5 device is already disabled in the devicetree. Change-Id: Ia4970dc07ef57e8184bce395a446974a22eddb08 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-06mb/intel/kblrvp: Mark disabled SerialIO devices as `off`Angel Pons
Disable devicetree devices disabled in the `SerialIoDevMode` array. These devices get disabled by FSP-S, and coreboot doesn't see them. Change-Id: I8dbb45c96eae5188e5999df9a458f06f6b196adf Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57229 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-09-06mb/intel/kblrvp: Do not use Legacy mode for UART #2Angel Pons
All KBLRVP variants select the `INTEL_LPSS_UART_FOR_CONSOLE` Kconfig option and set `UART_FOR_CONSOLE` to `2`, so that UART #2 is used as coreboot console. However, the LPSS console driver requires the LPSS UART to be memory-mapped (and not I/O-mapped, like Super I/O UARTs). KBLRVP variant RVP8 uses `PchSerialIoLegacyUart` for UART #2, which makes FSP-S configure UART #2 in legacy, I/O-mapped mode. This most likely results in the UART console not working after FSP-S has run. This change updates RVP8 to use `PchSerialIoSkipInit` for UART #2, like the other KBLRVP variants do. Change-Id: Ic5c78f5895fe1dd5e7be6ef7aec3de6940dd2475 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-06mb/intel/kblrvp: Drop commented-out SD card configAngel Pons
This is most likely a copy-paste remnant, and will never be needed for RVP8: the SDXC device does not exist on PCH-H (and RVP8 uses a PCH-H). Change-Id: I69059a88dcdb032beaab5fb03981dccbae0db02e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-06mb/intel/kblrvp: Disable I2C #4 and #5 on PCH-HAngel Pons
The I2C #4 and I2C #5 devices do not exist on PCH-H. Disable the devices using the PCH-H variants' overridetrees (the base devicetree enables I2C #4), set the `SerialIoDevMode` entries to `PchSerialIoDisabled` and drop inapplicable I2C #4 voltage settings. Change-Id: I56f34fa2004993d2123ccd5c1008fd71682ec2bd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57226 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-09-06soc/intel/broadwell: Drop unused PCH PCI device macrosAngel Pons
Get rid of several unused PCH PCI device macros. These macros expand to a call to the `pcidev_path_on_root_debug()` function, which only exists to debug bad code. If needed, these macros should be reimplemented with the `pcidev_path_on_root()` function instead. Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I366e064f3fe708b55fb381aee25b2795b1c61142 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55529 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-09-06device/device.h: Drop unused function declarationAngel Pons
The `dev_optimize()` function is neither defined nor used anywhere in the tree. Drop its unnecessary declaration. Change-Id: I902bda3244c6496a04f364fad3ecbbdd118dd543 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57398 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-06mb/**/gma-mainboard.ads: Use lowercase for `others`Angel Pons
These two files are the only places where the `others` keyword is capitalised. Use lowercase for consistency with the rest of the tree. Change-Id: I6b785e28d1d00a11b802a44348a7132ceb6b599d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57399 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-06soc/intel/adl: Move USB4 hotplug Kconfig to commonFurquan Shaikh
This change adds a new Kconfig `SOC_INTEL_ENABLE_USB4_PCIE_RESOURCES` that can be selected by mainboard to reserve hotplug resources for USB4 at the SoC level. `ADL_ENABLE_USB4_PCIE_RESOURCES` is dropped from soc/intel/alderlake and instead the newly added Kconfig is now used. This new Kconfig is added so that the same config can be used across different platforms. In following changes, this Kconfig is utilized by TGL as well. Change-Id: Id7c359a0e255c43c2732f6cbe287bc7da14a46e3 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-05mb/supermicro: Add X9SAE and X9SAE-VBill XIE
Mainboard information can be found in the included documentation. Change-Id: I9dfc58bb99e14cd9dac2ac53afc0ea11d2252aa9 Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-09-05soc/intel/common/cse: Add argument for CSE fixed client addrRizwan Qureshi
There are multiple HECI clients in the CSE. heci_send_receive() is sending HECI messages to only the MKHI client. Add an argument to heci_send_receive() function to provide flexibility to the caller to select the client for which the message is intended. With the above change heci_send() and heci_receive() functions are no longer required to be exposed. In the follow-up patches there will be messages sent to one other client. BUG=None BRANCH=None TEST=Build and boot brya. HECI message send and receive to MKHI client is working. Also, MEI BUS message to disable bus is working. Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Change-Id: Icde6d0155b62472b6a7caadc5fc8ea2e2ba6eb0c Reviewed-on: https://review.coreboot.org/c/coreboot/+/57295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-05soc/intel/alderlake: Add tpch device information under dptfSumeet Pawnikar
Add tpch device information for thermal functionality under dptf for alderlake soc based platform. BUG=b:198582766 BRANCH=None TEST=Build FW and test on brya0 board Change-Id: Iad8e8bc0b7a104bbe582bc477936d0d00087f1d1 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-05drivers/intel/dptf: Add new thermal control mechanism for pch deviceSumeet Pawnikar
Add new thermal control mechanism for pch device under dptf driver. This provides support of different control knobs for FIVR. BUG=b:198582766 BRANCH=None TEST=Build FW and test on brya0 board Change-Id: I035d2844b9ba6a9532ae006fc1c43e34cb94328a Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-05mb/google/dedede/var/gooey: Configure I2C times for I2C devicesstanley.wu
Configure I2C high / low time in device tree to ensure I2C CLK runs under I2C_SPEED_FAST (400 kHz). Measured I2C frequency just as below after tuning: Touchpad: 386.7kHz Touchscreen: 387.4kHz Audio: 385.7kHz P-sensor: 378.1kHz BaUG=b:197247706 BRANCH=dedede TEST=Build and check I2C clock is under 400kHz Signed-off-by: stanley.wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: Ic5d5660181f36f161ae04cbf5003f6d7ad4bc16f Reviewed-on: https://review.coreboot.org/c/coreboot/+/57297 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-05mb/google/dedede/var/gooey: Add MT53E512M32D1NP-046 as supported mem moduleStanley Wu
Add MT53E512M32D1NP-046 WT:B supported memory part in the mem_parts_used.txt and generate the SPD ID for the part. Manufacturer is Micron, and the memory part is 1anm Tech, difference to 1xnm Tech on MT53E512M32D2NP-046. BUG=b:194223174 BRANCH=dedede TEST=Build the gooey board. Change-Id: I7b83126a2bf98bb9d0ca05d397c288e0d99ed781 Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57310 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-05soc/intel/common: Add PMC IPC commands for FIVRSumeet Pawnikar
Add PMC IPC commands information for FIVR control functionality. BUG=b:198582766 BRANCH=None TEST=Build FW and test on brya0 board Change-Id: Iccb43b7ba4f0765499bf1844efbbb526bd671a8f Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-05soc/intel/jasperlake: Utilize vbt data size Kconfig optionSeunghwan Kim
Currently maximum VBT data size for Jasper Lake is 8KB, but Bugzzy would use VBT data over 8KB. This change makes use of Kconfig option to increase the maximum VBT data size to 9KB for Jasper Lake. BUG=b:194029827 BRANCH=dedede TEST=build and boot bugzzy and verify fw screen is loaded Change-Id: I0abe1ba5609b48a8a8b15f88bec28342ce26c78f Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57201 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-05mb/google/dedede/var/drawcia: change LTE reset pin to GPP_H17Wisley Chen
Drawper change LTE reset pin from GPP_H0 to GPP_H17 from DVT phase. BUG=b:198117092 TEST=emerge-dedede coreboot Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: Ib65580babf7d21535df2bd8d33bb19261bebfe15 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57204 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Henry Sun <henrysun@google.com>
2021-09-05mb/intel/adlrvp: Clean up the print messageBora Guvendik
TEST=none Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I6346b087543217c78f87751051a4f38b23c566d2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-09-05mb/google/guybrush: Set eSPI alert as dedicated open drainRob Barnes
Guybrush based boards must usa a dedicated eSPI alert#. Must be open drain to prevent power leaks. Keep guybrush reference board in-band since alert# may not be connected. BUG=b:198409370 TEST=Build guybrush and nipperkin, boot guybrush BRANCH=None Change-Id: I4b23bfc6a1167aebfde5acd524fda043b63163dc Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57313 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-05soc/intel/elkhartlake: Lock PAM registers in finalizeTim Wawrzynczak
Use the support from the previous patch to have coreboot lock the PAM registers instead of the FSP when the lockdown configuration is set to coreboot. Change-Id: Ib6fce70d6b0386906850884880dadbf45597452d Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-05soc/intel/cannonlake: Lock PAM registers in finalizeTim Wawrzynczak
Use the support from the previous patch to have coreboot lock the PAM registers instead of the FSP when the lockdown configuration is set to coreboot. Change-Id: I6ae22f9df4834508dfa304050fad44d45df45334 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-05soc/intel/jasperlake: Lock PAM registers in finalizeTim Wawrzynczak
Use the support from the previous patch to have coreboot lock the PAM registers instead of the FSP when the lockdown configuration is set to coreboot. Change-Id: I10f859f30b260d012f0bc8755f32413d8b2cf267 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-05smbios.c: Rename two local functionsAngel Pons
Rename two functions that have `walk` in their name but do not perform any walk. The new names are derived from the comments just above these functions' definitions. Also, remove these now-redundant comments. Change-Id: I380a5b60b3f4e820e8f6d6f960826de97c0446be Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57361 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-05drivers/intel/fsp/Makefile: error out when FSP files aren't specifiedFelix Held
Error out when the FSP binaries that are supposed to be added aren't specified. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Nico Huber <nico.h@gmx.de> Change-Id: Ie5f2d75d066f0b4e491e9c8420b7a0cbd4ba9e28 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57219 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-09-05utils/abuild: select FSP_USE_REPO instead of ADD_FSP_BINARIESFelix Held
Like USE_AMD_BLOBS and USE_QC_BLOBS in the case of the AMD and Qualcomm repos, FSP_USE_REPO controls if the Intel FSP repo will get checked out and will be available during the Jenkins runs. ADD_FSP_BINARIES will get selected in drivers/intel/fsp2_0/Kconfig when FSP_USE_REPO is selected. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I72faa6f9e5f2b06ab7cd43595ae0b49bf4d39630 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-09-05mb/intel/leafhill,minnow3: remove FSP_M_CBFS and FSP_S_CBFS overrideFelix Held
The overrides set the options to the same value as drivers/intel/fsp2_0/ Kconfig does, so drop the overrides. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I53922786382a2e7d29b3df560a1998f41e1d2ea8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-09-05mb/intel/leafhill,minnow3: remove FSP_M_FILE and FSP_S_FILE overrideFelix Held
Normally, selecting FSP_USE_REPO will select FSP_FULL_FD which then will configure the proper paths for FSP_M_FILE and FSP_S_FILE. The override in these two boards caused FSP_M_FILE and FSP_S_FILE being empty despite ADD_FSP_BINARIES being selected by FSP_USE_REPO which is an invalid case that needs to be avoided, so remove the board-level override of those two options. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I20c8cebea8327d59f0f33d05b824a74bf2121f4b Reviewed-on: https://review.coreboot.org/c/coreboot/+/57347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-09-05mb/intel/leafhill,minnow3: remove ADD_FSP_BINARIES config overrideFelix Held
The ADD_FSP_BINARIES override in the mainboard's Kconfig caused this option to not be selected when FSP_USE_REPO is selected. Remove the override to fix this problem. These two boards are the only ones in tree that had an override for this option, so now the ADD_FSP_BINARIES option is only defined in drivers/intel/fsp2_0/Kconfig. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I23439f3134eef9460625addbff7efd64c5f65ae5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57346 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-09-05sb/amd/pi/hudson: drop HUDSON_UART option and corresponding codeFelix Held
This option is neither selected nor usable for the only remaining SoC that uses this code, so drop the remaining parts. configure_hudson_uart isn't called anywhere and isn't even compiled, since it's guarded by an #if CONFIG(HUDSON_UART) block and the HUDSON_UART Kconfig option isn't selected anywhere. Both the offsets used in the iomux_write8 calls and the UART controller itself aren't listed in the BKDG #52740 Rev 3.05 for the AMD Family 16h Models 30h-3Fh APUs which is the only SoC that uses this code, so the code didn't even apply for this chip. TEST=Timeless build for pcengines/apu2 results in identical binary. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3f462d1f83a0f1ba851329ebebb1f3263267fdc6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-04configs/config.google_meep_cros: don't select ADD_FSP_BINARIESFelix Held
This config selected ADD_FSP_BINARIES even though HAVE_INTEL_FSP_REPO is only defined for Apollolake and not Geminilake that resides in the same SoC directory and uses the same Kconfig file. This results in the paths to the FSP binaries not being defined, in which case the ADD_FSP_BINARIES option shouldn't be selected. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I95123c4930b44a3b76c87768e130eb7359bbf625 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-09-04soc/amd/picasso: select ADD_FSP_BINARIES if USE_AMD_BLOBS is selectedFelix Held
Since the FSP binaries for Picasso are present in the amd_blobs repo, select the ADD_FSP_BINARIES option if the Kconfig option to check out that repo is set. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9a8571730cf271ad5e113e5df87700882b3c5475 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-09-04cpu/x86: Use MP_RUN_ON_ALL_CPUS macro instead of hardcodingSubrata Banik
This patch ensures mp_run_on_all_aps() is passing 'MP_RUN_ON_ALL_CPUS' macro rather hardcoding `0` while running `func` on all APs. Change-Id: Icd34371c0d4349e1eefe945958eda957c4794707 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57342 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-04sb/amd/pi/hudson/soc/gpio: add SOC_GPIO_TOTAL_PINS definitionFelix Held
EGPIO132 is the last documented GPIO on the GPIO controller in the NDA version of the BKDG for AMD Family 16h Models 30h-3Fh Processors (#52740 Rev 3.06) which is the only SoC using this code, so define SOC_GPIO_TOTAL_PINS as 133, since the internal GPIO numbers are 0-indexed. This definition will be needed the subsequent patch that'll add the remote GPIO support to the common AMD GPIO code to make sure that the compiler can optimize out the code path needed to support the remote GPIO access which isn't available on this platform anyway. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I877d462c5e753c9bbb3461dbb10cde2adc2cb12c Reviewed-on: https://review.coreboot.org/c/coreboot/+/56809 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-09-04mb/google/volteer: Move EC_HOST_EVENT_USB_MUX wake event to S0ix onlyTim Wawrzynczak
If a USB_MUX_EVENT happens while the AP is in S3 during powerdown transtion (S0->S3->S5), this will cause the device to boot again after it has finished sequencing down to S5. Since S3 is not POR for ChromeOS devices anymore, change this event to wake from S3 and S0ix to just S0ix. BUG=b:197039097 TEST=abuild Change-Id: I91e5e0ab8301377817875b6fa9e3c0e1f96c1465 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57341 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-09-03util/liveiso: Add NixOS configs for bootable live systemsFelix Singer
Add NixOS configurations for bootable live systems containing a set of tools which might be useful for firmware development in general and for working on coreboot. There are two configurations provided. One for console-only and a graphical one, which is mostly the same as the console image but it comes with Gnome Shell as window manager and some graphical tools in addition. An image can be built using `build-console.sh`, respectively `build-graphical.sh`. The resulting iso image can be found in `result/iso/`. The console image results in ~700MB, while the graphical one results in ~2GB. Change-Id: Iaf49d198e99781434bd89d2a8a125a4988b77e1c Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-03arch/x86: Update debug message to callout the reason for failureSubrata Banik
This patch updates debug message to specifically the case when SMBIOS table 7 write would abort due to either `unknown` CPU or CPU `doesn't have support for deterministic cache cpuid leaf`. Change-Id: I288593b3f78ab858bf66c689e7cfb6ba2ff746d0 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57337 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-03arch/x86: Check unsupported CPU type while writing to SMBIOS table 7Subrata Banik
Don't attempt to fill the SMBIOS table if the CPU doesn't support deterministic cache CPUID. TEST=Able to fix the hang issue seen on ASRock E350M1 with commit hash e2b5fee. Change-Id: Id65dc963e235f7080370a32cf69bcc4bee94d28f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57306 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Swift Geek (Sebastian Grzywna) <swiftgeek@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-03arch/x86: Skip returning default leaf value as `0`Subrata Banik
`cpu_get_cache_info_leaf()` function is responsible to report leaf value for CPU that have support for deterministic cache cpuid. As per available datasheets from AMD and Intel the supported CPUID leafs are 0x8000_001d for AMD and 0x04 for Intel. Hence, this CL skips returning default leaf value as `0`. TEST=Verified fixes: e2b5fee3b006 (arch/x86: smbios write 7 table using deterministic cache functions) hang issue on ASRock E350M1. Change-Id: Iee33b39298e7821ac5280d998172b58a70c8715b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57305 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-03sc7280: Refactor QSPI driverRoja Rani Yarubandi
Refactor Qcom QSPI driver to separate common and SoC specific driver code. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Rajesh Patil <rajpat@codeaurora.org> Change-Id: Ibe1dc3fe8bd71957ff8604ef4c9d97963100ccfb Reviewed-on: https://review.coreboot.org/c/coreboot/+/55322 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-09-03mb/google/brya/variants: fix override values for power limitsSumeet Pawnikar
There are two different types of 682 SKU available with TDP of 28W and 45W. This patch fix override values for power limits for these 682 SKU. This patch also sets power limit values dynamically based on machine ID and CPU TDP of SKU. BUG=b:194745919 BRANCH=None TEST=Build FW and test on brya0 board Change-Id: I796e56321ae9c8312530a4b8986cd73a2245f5fa Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57290 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-03soc/qualcomm/common/qspi: Add support for common QSPI driverRavi Kumar Bokka
copy existing QSPI driver from /soc/qualcomm/sc7180 to common folder. This common QSPI driver works in master mode and provides read/write operation for the slave devices like flash. BUG=b:182963902 TEST=Validated on qualcomm sc7180 and sc7280 development board Signed-off-by: Rajesh Patil <rajpat@codeaurora.org> Change-Id: I5b3816b823e14db1dd13f1eb4a6761c7a61604b9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-09-03soc/qualcomm/sc7280: DDR One-Time-Training SupportRavi Kumar Bokka
Introduce DDR One-Time-Training Support Device reboots without training from second iteration and also DDR training data is 32kb size, hence update required in memlayout and to sync with upstream changes the Fmap size even got bumped up. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Change-Id: I81038c5c7802c154f4310509c6c64710580b8ce4 Signed-off-by: Sudheer Kumar Amrabadi <samrabad@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54352 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-09-03mainboard/google/herobrine: Configure SDCC clockShaik Sajida Bhanu
Configure 384MHz for eMMC clock and 50MHz for SD card clock. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Change-Id: I8acbce58614add0228adc39289762da10937cbe2 Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-09-03qualcomm/sc7280: Move to use common clock driver for sc7280Taniya Das
It supports the clock consumers for QUP, SDCC, PCIE, Display to be able to configure & enable the desired clocks. The clock driver also supports reset of subsystems like AOP and SHRM. Also add support for Zonda PLL enable for CPU in common clock driver. Refactor the SC7280 clock driver to use the common clock driver APIs. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Change-Id: I590a93cda0d6eccb51b54692b620d43ccacede77 Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50580 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-03mb/intel/adlrvp_m: Fix TPM IRQ conflict with I2C4Selma Bensaid
Add TPM IRQ config to gpio_m.c, so the TPM IRQ is not allocated to I2C4. BUG=NA BRANCH=None TEST= boot to os and check cat /proc/interrupts, cr50 SPI interrupt is assigned and does not conflict with I2C. CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 CPU8 CPU9 CPU10 CPU11 0: 36 0 0 0 0 0 0 0 0 0 0 0 IO-APIC 2-edge timer 1: 0 0 0 0 0 0 0 0 9 0 0 0 IO-APIC 1-edge i8042 8: 0 0 0 0 0 0 0 0 0 0 0 0 IO-APIC 8-edge rtc0 9: 0 0 0 0 0 0 0 0 0 0 0 0 IO-APIC 9-fasteoi acpi 14: 0 0 0 0 0 0 0 0 0 0 0 0 IO-APIC 14-fasteoi INTC1055:00 16: 0 0 0 0 0 0 0 0 0 0 4 0 IO-APIC 16-fasteoi intel-ipu6 22: 0 13 0 0 0 0 0 0 0 0 0 0 IO-APIC 22-fasteoi idma64.4, i801_smbus, ttyS0 37: 0 0 0 0 0 0 0 0 0 0 0 0 IO-APIC 37-fasteoi idma64.0, i2c_designware.0 38: 0 0 0 0 0 0 0 0 0 0 4 0 IO-APIC 38-fasteoi idma64.1, i2c_designware.1 41: 0 0 0 0 2274 0 0 0 0 0 0 0 IO-APIC 41-edge cr50_spi 42: 0 0 0 0 0 0 0 0 0 0 0 0 IO-APIC 42-fasteoi idma64.2, i2c_designware.2 43: 4 0 0 0 0 0 0 0 0 0 0 0 IO-APIC 43-fasteoi idma64.3, i2c_designware.3 Signed-off-by: Selma Bensaid <selma.bensaid@intel.com> Change-Id: Id0f3885dec5a6f635254c233709090321491c739 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57102 Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-03soc/intel/alderlake: set power limits dynamically for thermalSumeet Pawnikar
Set power limit values dynamically based on CPU TDP and PCI ID of SKU. BUG=b:194745919 BRANCH=None TEST=Build FW and test on brya0 board Change-Id: Ic331a3debb076ef08a312a31edc1468974fd4902 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57035 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-03soc/intel/common: get tdp of CPU for different SKUsSumeet Pawnikar
Get tdp value of CPU for different SKUs based on PKG POWER MSR. BUG=b:194745919 BRANCH=None TEST=Build FW and test on brya0 board Change-Id: I9fba0a64da2f1d79d633054dddd9fdf1d3d8e258 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-09-03mb/pcengines/apu2: add and use IOMUX definesFelix Held
Add GPIO IOMUX defines for the pins that are used in the mainboard code which enables using the PAD_GPI and PAD_GPO macros. TEST=Timeless build for APU2/3/4/5 results in identical binary. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie32df9ed2cb6a5670a29cff91e085a3585c8bcf7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56836 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-09-03soc/amd/common/block/gpio_banks/Kconfig: add option for non-soc/ chipsFelix Held
southbridge/amd/pi/hudson uses the common GPIO bank access code from soc/amd, but doesn't provide all functionality that would be needed to use the full functionality. Add a Kconfig option that switches off some functionality in the common SoC GPIO access code, so that more of the functionality proviced by the common SoC GPIO code can be used in the AMD binaryPI chipset and board code. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib10d5d5580aab30a359aa001bb6fc7e9fdb8fc41 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56783 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-03mb/pcengines/apu2/gpio_ftns.h: add comment about GPIO numbersFelix Held
The mapping of the package GPIO numbers to the GPIO numbers on the GPIO controller isn't a 1:1 one, so add a comment about that to avoid confusion. Also change the comment style to match the style guide. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie30bf5483ea2e2516d7e3fdd21ea9338362e526e Reviewed-on: https://review.coreboot.org/c/coreboot/+/56808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-09-03mb/pcengines/apu2/romstage: use proper GPIO configuration APIFelix Held
Also remove the unused amdblocks/acpimmio.h include in gpio_ftns.c. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: Michał Kopeć <michal.kopec@3mdeb.com> Change-Id: If121941c8a6ba88913653192740997aeef426548 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56784 Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-03mb/google/dedede/var/bugzzy: Configure DDI port A as MIPI DSISeunghwan Kim
Override DdiPortAConfig as MIPI DSI BUG=b:192521391 BRANCH=None TEST=Built test coreboot image and boot on bugzzy board Change-Id: If308f9d69fea56176527e7b67f36b29c43adb525 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57107 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-09-03drivers/intel/fsp2_0/Makefile: add condition for FSP-T CBFS fileFelix Held
Make adding the FSP-T file to CBFS depend on both ADD_FSP_BINARIES and FSP_CAR Kconfig options being set. The FSP_T_FILE Kconfig option depends on both, so also check if both are selected in the Makefile where it tries to add the FSP-T to the CBFS. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Furquan Shaikh <furquan@google.com> Change-Id: Id347336f2751c6d871f31d89c30a1222037c2d69 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57220 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-09-03vc/mediatek/mt8195: Remove unused codeRyan Chuang
Remove unused drivers and some fast calibration implementations to align with the latest MTK memory reference code. Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com> Change-Id: I3b235cbceb231898f00fce7905f596eab54ca595 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57275 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-03soc/qualcomm/common: clock: Add support for common clock driverTaniya Das
The clock driver supports configuring the general purpose PLLs, configuring the root clock generator (RCG), enable clock branch, enable gdsc and also the block resets. The common clock driver exposes PLL configuration functions and also different Agera PLL enable functions for the CPU PLLs. While at it, the common driver also supports reset of subsystems like AOP and SHRM. SC7180 clock driver is also refactored to use the common clock driver APIs. BUG=b:182963902 TEST=Validated on qualcomm sc7180 and sc7280 development board. Change-Id: I03d1b4a2fb90303c7259ec08f312d78b4e33ec39 Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-09-03qualcomm/sc7180: Clean up drivers with common clockTaniya Das
As we move to use the common clock driver, the sc7180 clock driver, watchdog and display drivers requires few cleanups, thus update the impacted drivers. Earlier the display client is expected to provide 2n divider value, as the divider value in register is in form "2n-1". mdss_clk_cfg.div = half_divider ? (half_divider - 1) : 0; The older convention in the upcoming patches would be replaced with the common macro of QCOM_CLOCK_DIV, thus need the divider needs to be updated. mdss_clk_cfg.div = half_divider ? QCOM_CLOCK_DIV(half_divider) : 0; To accommodate impacting the functionality, the half_divider is taken care in the clock driver. BUG=b:182963902 TEST=Validated on qualcomm sc7180 development board Change-Id: Ic334fd0d43e5b4b1e43a27d5db7665f0bc151d66 Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-09-03mb/intel/adlrvp: Move common Kconfig from mb Kconfig.name to KconfigSubrata Banik
CONFIG_DRIVERS_INTEL_MIPI_CAMERA and CONFIG_SOC_INTEL_COMMON_BLOCK_IPU are getting selected for all ADLRVPs irrespective of ADL-P and ADL-M (internal and external EC SKUs) hence, select those Kconfigs from mainboard Kconfig rather Kconfig.name. Also, select DRIVERS_INTEL_SOUNDWIRE as per alphabetical order. TEST=No changes are seen while the .config file is getting auto generated. Change-Id: I62d5ec19c3364da79ebe7287b1b3d6eb2a0efca0 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57314 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-03skylake: Default to `BOARD_TYPE_DESKTOP` for PCH-HAngel Pons
Set the `UserBd` FSP-M UPD to `BOARD_TYPE_DESKTOP` by default on PCH-H. Remove now-redundant mainboard code to set the `UserBd` UPD. Change-Id: I349abe5d89f562c158ce9baadbca2b2f56695846 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57261 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-03mb/prodrive/hermes: Do not overwrite `IedSize` UPDAngel Pons
SoC code already sets this UPD to `CONFIG_IED_REGION_SIZE`, which defaults to 0x400000 for soc/intel/cannonlake. Change-Id: I6587e17a4a3425c561cffe6e3df0d932a2458168 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57260 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-09-03mb/prodrive/hermes: Use `BOARD_TYPE_SERVER` defineAngel Pons
Change-Id: I291dc71bb6e3888b71ebce315f9ad09ccbc4a9a7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57259 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-09-03src/*: Specify type of `DIMM_MAX` onceAngel Pons
Specify the type of the `DIMM_MAX` Kconfig symbol once. Change-Id: I2e86baaa8bd50c7b82c399fde5dcea05da6b4307 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-09-03src/*: Specify type of `DIMM_SPD_SIZE` onceAngel Pons
Specify the type of the `DIMM_SPD_SIZE` Kconfig symbol once. Change-Id: I619833dbce6d2dbe414ed9b37f43196b4b52730e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57257 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-09-02mb/google/guybrush: Update PCIe WWAN path for WWAN PCIe checkMartin Roth
variant_has_pcie_wwan() was always coming back as disabled because find_dev_nested_path() couldn't find the device until the domain was added to the array. BUG=b:193036827 TEST=Boot guybrush with PCIe & USB WWAN devices. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Id94fa0b0ff5c29fa447e869220d27ccfe61438c6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57315 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-02Documentation: add Intel BroadwellIru Cai
Change-Id: I0b1c29162a64030b5c100368f2471702e22b8311 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54744 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-02mb/google/brya: reduce RW_MRC_CACHE size to 64KNick Vaccaro
The RW_MRC_CACHE only needs to be 64K for Brya. BUG=none TEST="emerge-brya coreboot chromeos-bootimage", flash and boot brya0 to kernel. Change-Id: I74365b795e184b92f483ae2bf862791e235c5362 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56989 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-02wifi: Add support for DSM methods for intel wifi cardSugnan Prabhu S
Add support for DSM methods as per the connectivity document 559910_Intel_Connectivity_Platforms_BIOS_Guidelines_Rev6_4.pdf BUG=b:191720858 TEST=Check the generated SSDT tables for DSM methods Change-Id: Ie154edf188531fe6c260274edaa694cf3b3605d3 Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-02wifi: Add support for wifi time average SAR configSugnan Prabhu S
Add support for the WTAS ACPI BIOS configuration table as per the connectivity document: 559910_Intel_Connectivity_Platforms_BIOS_Guidelines_Rev6_4.pdf BUG=b:193665559 TEST=Generated SAR file with the WTAS related configuration values and verified that the SSDT has the WTAS ACPI table. Change-Id: I42cf3cba7974e6db0e05de30846ef103a15fd584 Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57061 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-02wifi: Add support for per-platform antenna gainSugnan Prabhu S
Add support for the PPAG ACPI BIOS configuration table as per the connectivity document: 559910_Intel_Connectivity_Platforms_BIOS_Guidelines_Rev6_4.pdf BUG=b:193665559 TEST=Generated SAR file with the PPAG related configuration values and verified that the SSDT has the PPAG ACPI table. Change-Id: Ie8d25113feeeb4a4242cfd7d72a5091d2d5fb389 Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>