summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-06-12util/autoport: Update for recent USB developmentsKeith Hui
Update autoport for: 1. Commit ee126348726b ("nb/sandybridge,sb/bd82x6x: Configure USB from southbridge devicetree") 2. Commit 94625d2aae76 ("sb/intel/bd82x6x: Allow actual USBIRx values for native USB config") As a side effect of #2 above, no more (broken anyway) FIXME comment will be written for usb_port_config. Change-Id: I3b8f44d9de19a7446e2fbcbce1aab6ec6583ebe3 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-06-12mb/google/nissa/var/pujjoga: Add WWAN power off sequenceLeo Chou
Pujjoga support EM060 WWAN, use wwan_power.asl to handle the power off sequence. BUG=b:346479638 TEST=Build and boot on pujjoga Change-Id: I1273d09385c661835d741691b3c4af26e72a9f86 Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83042 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-12mb/google/nissa/var/pujjoga: Tune SX9324 registers settingLeo Chou
Currently, the P sensor does not work. So add SX9324 registers settings based on tuning value from SEMTECH. BUG=b:340749850 TEST=Check i2c register settings on Pujjoga and confirm P sensor function can work by kernel 6.6 driver. Change-Id: I205c1f5228d792afc763a06f74a8744918e2da75 Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82689 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-06-12mb/google/nissa/var/sundance: Add wifi sar tableLeo Chou
Add AX211 wifi sar table for sundance wifi sar config. Use fw_config to separate different wifi card settings. WIFI_SAR_TABLE_AX211: 0 BUG=b:332978681 Test=emerge-nissa coreboot Change-Id: Ide84996da567e4f866a2a1309a6976ed8df635a6 Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83044 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-06-12mb/google/nissa/var/sundance: Add FW_CONFIG probe for WWAN devicesLeo Chou
Add FW_CONFIG probe based on sundance boxster of below devices: WWAN Schematic version: NEC_SHIKIBU_ADL_N_MB_EVT_20240330 BUG=b:332978681 TEST=Boot to OS and verify the WWAN devices is set based on fw_config. Change-Id: I14339201d8ee21c85fefa96a49323e0c25cb8eca Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83041 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-12mb/google/trulo/var/orisa: Disable storage devices based on fw_configAmanda Huang
Disable devices in variant.c instead of adding probe statements to devicetree because storage devices need to be enabled when fw_config is unprovisioned. BUG=b:345112878 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: I1e5e49c1baa8d2b00134c26cc3b69aa15712b512 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-06-12mb/google/trulo/var/orisa: Enable HDA Codec ALC256Amanda Huang
We use ALC256 as HDA codec on orisa. Add verb table and the related device tree changes for HDA related registers. BUG=b:338523452 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: I92051886341bd317cce6061ece83439d156b0f90 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82719 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-06-12mb/google/trulo/var/orisa: Add overridetreeAmanda Huang
Add override devicetree based on schematic_20240607. BUG=b:333486830 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: Id3ceff41fdb8e4a57bd6dab6247b622a5d13587d Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82714 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-06-11treewide: Move skip_atoi function to commonlibKapil Porwal
BUG=none TEST=Build and verify on Screebo TEST=make unit-tests ``` $ make tests/commonlib/bsd/string-test [==========] tests_commonlib_bsd_string-test(tests): Running 1 test(s). [ RUN ] test_skip_atoi [ OK ] test_skip_atoi [==========] tests_commonlib_bsd_string-test(tests): 1 test(s) run. [ PASSED ] 1 test(s). ``` Change-Id: Ifaaa80d0c696a625592ce301f9e3eefb2b4dcd98 Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82910 Reviewed-by: Jakub Czapiga <czapiga@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-06-11mb/razer/blade_stealth_kbl/h3q: add VBIOS tableReagan Bohan
This commit adds the VBIOS table, extracted from Linux sysfs running on the stock firmware version 8.02, to the coreboot tree, required for some graphics backends. Change-Id: I0d1c9795741e112154bfe6885eea744538373d5a Signed-off-by: Reagan Bohan <xbjfk.github@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82460 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-06-11mb/razer/blade_stealth_kbl: add panel_cfgReagan Bohan
This commit defines the panel_cfg register for the Razer Blade Stealth (Kaby Lake). This enables libgfxinit support. These values are derived from the stock firmware. First, VBIOSes were extracted from the stock firmware. Then, intelvbtool was used to extract the VBT from each of the VBIOS tables. Finally, intel_vbt_decode from igt-gpu-tools was used to extract the register values. Although there were multiple VBIOSes present in the firmware, all VBIOSes across both firmwares (on version 1.50 for the H2U and 8.02 for the H3Q) had the same register values. Change-Id: I4c8b26ffb7a70d08655986084a714206d9d0c96a Signed-off-by: Reagan Bohan <xbjfk.github@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82458 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-11sb/intel/lynxpoint/fadt: Fill extended FADT after populating lengthsMatt DeVillier
Commit 88decca14f84 ("ACPI: Add helper fill_fadt_extended_pm_io()") moved the population of the extended FADT to a separate function, but incorrectly placed that function call before various length fields were populated, leading to spurious validation errors in the cbmem boot log. Correct this by moving the call to fill_fadt_extended_pm_io() after the required fields are populated. TEST=build/boot google/slippy (wolf), verify no FADT errors in cbmem console log. Change-Id: I1f8522e4813e6071692206f2b7ad2a2f5086071e Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83035 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-06-11soc/amd/genoa_poc: Prefer include <soc/gpio.h> via <gpio.h>Elyes Haouas
Change-Id: I0e5fba7db7d97835001934cb140f4c76bdc46d3e Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82889 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2024-06-11tree: Drop non-existent directories from subdirs-yElyes Haouas
Change-Id: Icb9e72edf3a982a095dceee4da19f90c53fcddd0 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-06-11mb/google/trulo/var/orisa: Add memory configAmanda Huang
Fill in memory config based on the the schematic_20240607. BUG=b:333486830 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: I1456f7385e092b606fc0a35b25f3454600af8b23 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82662 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-10MAINTAINERS: Add Nicholas Chin for all Dell LatitudesNicholas Chin
All of the Dell Latitudes from GM45 and until at least Haswell use a derivative of the MEC5035 EC, and I have been actively working on coreboot support for this EC and boards that use it. Rename the "E6400 MAINBOARD" section to "DELL LATITUDE" and add mb/dell/snb_ivb_latitude and mb/dell/e7240 as additional paths. Change-Id: I7ba46980bfc8569a85593e415f01cc83fe7d67d7 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83008 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-10util/autoport: Assign SPD addresses in devicetreeAngel Pons
Commit 45e4ab4a660c (mb/*: Update SPD mapping for sandybridge boards) changed the way in which SPD addresses are set up for SNB/IVB boards, but autoport was not updated to reflect these changes. Result is: register "spd_addresses" = "{0x50, 0x51, 0x52, 0x53}" # FIXME: Put proper SPD map here" The stray quote at the end is irritating, but is hard to get rid of without substantial refactoring of autoport's guts. But, given that this is a FIXME comment, anyone using autoport should just drop the comment after verifying the SPD map, so it's not a big deal. In addition, update the corresponding section of the README, which was horrendously out-of-date. Change-Id: I6ad38f53afc4fafb45be7f086723cc0782a965ed Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82405 Reviewed-by: Keith Hui <buurin@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-10mb/google/nissa/var/riven: Add GPIO tableDavid Wu
Refer to the reference board of nivviks, and update GPIO settings based on latest schematic (Riven(ZDK)_MB_Proto_0601.pdf). BUG=b:337169542 TEST=Local build successfully. Change-Id: Ic43c743fcc2ec89b5a9e2fbe1a87b833d59f1e74 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82973 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-10arch/x86: Clarify help text for 64-bit supportSubrata Banik
The word "experimental" has been removed from the help text for HAVE_X86_64_SUPPORT Kconfig. This is because the x86_64 architecture has now been officially tested and enabled for several x86 SoC platforms. This work will provide us with the foundation we need to begin working with Intel's next-generation SoC platform (which requires to support 64-bit mode of booting by default). Therefore, we can now remove the word "experimental" from the "HAVE_X86_64_SUPPORT" Kconfig help text. TEST=Able to build and boot google/rex64 in 64-bit mode to ChromeOS. Change-Id: Ibd629f4e2722f3cbabbe297d4481790c9fa9226a Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83009 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-09sb/intel/lynxpoint/pcie.c: Add 9-series PCH-H device IDsAngel Pons
Looks like PCIe root port device IDs for 9-series PCH-H are missing from commit 434d7d45829e (sb/intel/lynxpoint: Add PCI DIDs for 9 series PCHs) for some reason. Add them, so that coreboot performs PCIe initialisation for 9-series PCH-H. Change-Id: I1589418e5e25daabbf09c66c637e9c4f86aa02a6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82947 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-09mb/asrock/h110m/Makefile.mk: Remove superfluous spd from subdirs-yNicholas Chin
The H110M does not use memory down, and the spd directory doesn't exist in the board's directory in the first place. This was probably just copy and paste leftover from some existing Skylake board in the initial port. TEST=Timeless build does not change. Change-Id: I35744310b2bf8a14165dae9808c982e6dc274a74 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83010 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-09cpu/x86/Kconfig: Add SMM Kconfig helpMaximilian Brune
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Change-Id: Ia0a5c48c6314f53c4ed72958f5d6f839f0a5c2ca Reviewed-on: https://review.coreboot.org/c/coreboot/+/77973 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-09superio/ite/it8659e: Add driver for ITE IT8659EMichał Żygowski
Based on the non-public "ITE IT8659E-I Preliminary Specification V0.7.2 (For H Version)". TEST=Initialize IT8659E on the new Protectli platform Change-Id: I11657ec6e1c880f0cee247071486a904a92bb7a1 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80497 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2024-06-09util/superiotool: Add support for dumping ITE IT8659E configurationMichał Żygowski
Based on the non-public "ITE IT8659E-I Preliminary Specification V0.7.2 (For H Version)". TEST=Dump IT8659E configuration on the new Protectli platform Change-Id: Ic036f8b99d5bd0107be7850fc4509da1bf020fe5 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-06-08mainboard/emulation/qemu-sbsa: Add qemu-sbsa boardDavid Milosevic
Add coreboot support for qemu's sbsa-ref (Server Base System Architecture) machine (-m sbsa-ref). The qemu-sbsa coreboot port runs on EL2 and is the payload of the EL3 firmware (Arm Trusted Firmware). Note that, coreboot expects a pointer to the FDT in x0. Make sure to configure TF-A to handoff the FDT pointer. Example qemu commandline: qemu-system-aarch64 -nographic -m 2048 -M sbsa-ref \ -pflash <path/to/TFA.fd> \ -pflash <path/to/coreboot.rom> The Documentation can be found here: Documentation/mainboard/emulation/qemu-sbsa.md Change-Id: Iacc9aaf065e0d153336cbef9a9b5b46a9eb24a53 Signed-off-by: David Milosevic <David.Milosevic@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-06-08mainboard: add Dell Latitude E7240Iru Cai
Based on autoport output. It boots to Arch Linux (Linux 6.6.3) from USB and mSATA with SeaBIOS. Change-Id: I6933bdbcc8d0bbb85d62657624740266284ac71c Signed-off-by: Iru Cai <mytbk920423@gmail.com> Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79746 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-06-08soc/alderlake/romstage: Set UsbTcPortEnPreMem UPD based on devicetreeMichał Żygowski
The UsbTcPortEn UPD for FSP-S is being set in ramstage, however the equivalent FSP-M UPD, the UsbTcPortEnPreMem, was not being set. Following the Meteor Lake example, set the UsbTcPortEnPreMem UPD as well for Alder Lake. Setting this FSP-M UPD will cause FSP to properly program sideband use BSSB_LSx pins for the enabled Type-C ports. Required for proper DCI debug and TCSS initialization flow. Change-Id: If3b79167ec1769ddfb7d28a6c78a3e80bd10afe7 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80500 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-06-08mb/dell: Add Latitude E6430 (Ivy Bridge)Nicholas Chin
Mainboard is QAL80/LA-7781P (UMA). The version with an Nvidia dGPU was not tested. This is based on the autoport output with some manual fixes. The VBT was obtained using `intelvbttool --inlegacy --outvbt data.vbt` while running version A24 (latest version) of the vendor firmware. The flash is 8MiB + 4MiB, and can be easily accessed by removing the keyboard. It can also be internally flashed by sending a command to the EC, which causes the EC to pull the FDO pin low and the firmware to skip setting up any chipset based write protections [1]. The EC is the SMSC MEC5055, which seems to be compatible with the existing MEC5035 code. Working: - Libgfxinit - USB EHCI debug (left side usb port is HCD index 2, middle port on the right side is HCD index 1) with the CH347 - Keyboard - Touchpad/trackpoint - ExpressCard (tested with USB 3.0 card) - Audio - Ethernet - SD card reader - mPCIe WiFi - SeaBIOS 1.16.3 - edk2 (MrChromebox's fork, uefipayload_202309) - Internal flashing using dell-flash-unlock Not working: - S3 suspend: Possibly EC related, DRAM power is getting cut when entering S3 - Physical wireless switch: this triggers an SMI handler in the vendor firmware which sends commands to the EC to enable/disable wireless devices, and has not been reimplemented - Battery reporting: needs ACPI code for the EC - Brightness hotkeys: probably EC related - The system reports that the power button was pressed and shuts down when the CPU hits around 86 degrees Celsius, before the CPU can thermal throttle. Likely EC and possibly PECI related. - Integrated keyboard with upstream GRUB 2.12 payload: Upstream GRUB initializes the 8042 PS/2 controller in a way that is incompatible with how the EC firmware emulates it. GRUB tries to initialize the controller with scan code set 2 without translation, but the EC only ever returns set 1 scan codes to the system and thus is only works as an untranslated set 1 keyboard or a translated set 2 keyboard, regardless of commands to set the scan code. A USB keyboard works fine. Unknown/untested: - Dock - eSATA - TPM - dGPU on non-UMA model - Bluetooth module (not included on my system) [1] https://gitlab.com/nic3-14159/dell-flash-unlock Change-Id: I93c6622fc5da1d0d61a5b2c197ac7227d9525908 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77444 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-08tree: Remove unused <option.h>Elyes Haouas
Change-Id: Ia3df14ebd365c00902b5d2ba300d8ade4c2d6c26 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2024-06-08sio/nuvoton: Add Kconfig for shared PS/2 portKeith Hui
Introduce HAVE_SHARED_PS2_PORT Kconfig for this Super I/O to have mainboards indicate if they have one shared PS/2 port on the rear panel. On these boards (where a Y-cable cannot allow both keyboard and mouse to work off the same port), if a PS/2 keyboard is not present, SIO should be configured to swap its role to mouse, to allow the OS to find and initialize any mouse connected. Supporting code will come in a separate patch. Idea is to condition them on this Kconfig. Change-Id: I156b15c6ba233cbe8b9ba4d2cfbca6836ad7483a Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82631 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-08mb/*: Remove old USB configurations from SNB/bd82x6x boardsKeith Hui
Remove USB configurations and data structures from northbridge devicetree (SNB+MRC boards) and bootblock/romstage C code (native-only SNB boards). All USB configurations are drawn from southbridge devicetree going forward. Change-Id: Ie1cd21077136998a6e90050c95263f2efed68a67 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81882 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-08nb/sandybridge,sb/bd82x6x: Configure USB from southbridge devicetreeKeith Hui
Transfer all USB responsibilities to southbridge/intel/bd82x6x, using one set of USB port configuration supplied by mainboards in the southbridge section of their devicetree. For MRC raminit, export southbridge_fill_pei_data() as a hook for southbridge code to implement. With new code via this hook, bd82x6x fills pei_data based on this one set of USB port config. For native raminit, early_usb_init() now goes directly to the devicetree and no longer get passed an address to it. TEST=abuild passes for all affected boards. All USB ports still work on asus/p8x7x-series/v/p8z77-m. Change-Id: I38378c7ee0701abc434b030dd97873f2af63e6b0 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81881 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-08mb/asus/p8z77-m: Update USB current map to match vendorKeith Hui
This board has used the USB current map from asus/p8z77-m_pro since it first landed in coreboot, which actually doesn't match vendor firmware. Apply values obtained from hardware while running vendor firmware to both native and MRC config. Change-Id: I7ce13493c3ecac8154460c1fedf05e2d70a8e394 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82756 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-08mb/*: Add consolidated USB port config for SNB+MRC boardsKeith Hui
For each sandybridge boards with option to use MRC or native platform init code, add a copy of the board's USB port config, consolidated between both code paths, into the southbridge devicetree, using special values allocated for this consolidation. These get hooked up in a separate patch. Change-Id: I53efca3d29b3c5d4d5b7e3d6dc3e6ce6c34201e6 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81880 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-08mb/asus/p8z77-v: Apply updated USB current map to sb devicetreeKeith Hui
This map is found stored in plain text in vendor firmware image. They will take effect when USB config is transitioned to southbridge devicetree. Change-Id: Iab0a225560856771407bb815ff4d8bc95d0f884f Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2024-06-07mb/*: Copy bd82x6x boards' USB port config into devicetreeKeith Hui
For mainboards using southbridge/intel/bd82x6x, copy the contents of mainboard_usb_ports array into southbridge devicetree. In-line comments are maintained. Boards also capable of using MRC raminit are done in a separate patch. Change-Id: Ia8a967eb3466106f3a34e024260e13d02f449a25 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81879 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-07sb/intel/bd82x6x/early_usb.c: Align native current map with MRCKeith Hui
Replace 3 unused values in the map with those found during a Ghidra examination of MRC binary, and on hardwares running vendor firmware (asus/p8z77-m and HP Z210 CMT Workstation). The outgoing values were introduced in commit 216ad2170ca8 ("sb/intel/bd82x6x: Add new USB currents") in anticipation for Gigabyte GA-Z77-DS3H mainboard, but effort to land it was eventually abandoned. Since commit xxxxxxxxxxxx, such values can be placed directly in the port config, so there should be no hurdle should that effort be resurrected. Add a few #defines in pch.h to place some inline documentation on MRC values, but more will be documented in the future when this mapping is introduced MRC-side. Finally, update autoport to match. Change-Id: I195c7f627994e48f7a6e6698589504dc96248cff Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2024-06-07sb/intel/bd82x6x: Make space for USB port config in devicetreeKeith Hui
This is the first step to: - Move USB port configs, which are static, from C code to devicetree; - Unify USB port configs between MRC and native code path. Change-Id: I59af466d41790e2163342cac8676457ac19371ea Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81878 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-07nb/intel/sandybridge: Refactor pei_data building codeKeith Hui
Incorporate fixed constants and simple data members into struct pei_data as it gets initialized and make more use of existing helpers. Compiler zeroes structs set up this way so the memset() is no longer needed. Drop northbridge_fill_pei_data() as it gets replaced entirely. Gut southbridge_fill_pei_data() in preparation for having southbridge code fill in USB-related members. This is to make the code easier to maintain, and realizes small savings in compiled code size too. Change-Id: I3140cb99b0106669aa27788641c2895ced048e95 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82480 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-07sb/intel/bd82x6x: Allow actual USBIRx values for native USB configKeith Hui
For USB to work under native code path, the USB port config needs to include a current setting for each port, which gets mapped to an initialization value that gets programmed into the USBIRx register for the respective port. This map resides in early_usb.c. The need to update it, whenever we see a previously unaccounted for initialization value, is getting out of hand. Instead this patch will allow specifying those values, presumably taken from an inteltool dump while running vendor firmware, directly in the USB port map. Because all USBIRx values are always in the 0x20000yyy form, we only need the lowest 12 bits. We have more than enough space in the USB port config structure for this. As the lowest yyy value we saw so far is 0x53, a note is included to limit the map to not more than 80 entries. Any value that is too big to be an index into the map is programmed directly, + 0x20000000, into the registers. This opens the future possibility to use the map for a simpler mapping for boards also using MRC, and remove the need for any mapping at all for the rest. Change-Id: I3d79b33bac742faa9bd4fc9852aff73fe326de4e Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2024-06-07soc/intel/cmn/cse: Support CSE sync from payloadKapil Porwal
Skip CSE sync in coreboot when payload is doing it. BUG=b:305898363 TEST=Verify CSE sync from depthcharge on Screebo Change-Id: Ifa942576c803b8ec9e1e59c61917a14154fb94b2 Signed-off-by: Kapil Porwal <kapilporwal@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2024-06-07util/smmstoretool: explain what happens when no store is foundMaciej Pijanowski
We are going to expose ths tool to end users, and want to take care that the presented information can be consumed by them. The current code simply prints below warnings if we use release binary available for end-user to download: No firmware volume header present No valid firmware volume was found It will be concerning and not clear to end users, they might not understant why it happens, what are the implications, and whether it is something that they should worry about. This commit tries to explain what actually happens here. Change-Id: Iaa2678f5ae7c243811484c0567ced97ae0b3fc0a Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82692 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
2024-06-07soc/mediatek/mt8173/i2c.c: Remove unused macroElyes Haouas
Change-Id: I90fbd7ce0e1c6cd15d73cb73dc774df2de56b346 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82932 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-06-07ec/starlabs/merlin/battery: Calculate unknown valuesSean Rhodes
If the EC doesn't know a value, it will report it as 0xffff. In these cases, calculate a value to used based on others. For example, if the EC doesn't know the last full charge capacity, report the design capacity to the OS. Change-Id: I310555ff913c2e492bbaec4d77281ac32c0de7a3 Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81408 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-07ec/starlabs/merlin/battery: Check values are valid before using themSean Rhodes
Change-Id: I559aca98044b7f0e6b08c475b5383c014bb4cd3f Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81407 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-07ec/starlabs/merlin: Rename BRPR to B1RPSean Rhodes
Rename the BRPR (Battery Remaining Percentage) to B1RP to match the format of the other variables. Change-Id: I64a744d78180156e16dbd483a35c7f97ac84bcba Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81406 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-07ec/starlabs/merlin: Report the battery cycle count to ACPISean Rhodes
Change-Id: Iccb60d3530227fb71a3ce5a3ab1421627cc86611 Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81405 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-07ec/starlabs/merlin/*: Remove temperature and control variablesSean Rhodes
The BT1T (temperature) and BT1C (control) are not used so remove them. Change-Id: Ie6e85042ec59851bcfb4c88a2e04181c3c39f89c Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81404 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-07ec/starlabs/merlin/*: Fix the size of the battery socSean Rhodes
The battery remaining percentage is a uint16_t, so correct this in the EC memory. This change is non-function, as the EC is little endian. Change-Id: I56a0ae8199a95c9722e9bcb4c0739f4ef1d6ab05 Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81403 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-07ec/starlabs/merlin/battery: Add extended battery informationSean Rhodes
Add BIX Method to report extended battery information. Change-Id: Ie5baecb20c7d4600e0cf1d19ff5f67ce2003fa1d Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81402 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2024-06-07mb/google/brya/var/xol: add support for wifi sar tableYH Lin
Add wifi sar table support for xol. Bit 31 in CBI/FW_CONFIG is used to select different sar table (index 0 or 1) but only 0 is in used at the moment. BUG=b:344274789 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot chromeos-bootimage Change-Id: Id4dc74c4f2a807d2e531b419ecb7b590d4c32ac2 Signed-off-by: YH Lin <yueherngl@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-06-07mb/google/brox/var/brox: update thermal settings to start fan earlySumeet Pawnikar
Current existing temperature thresholds of TSR1 sensor are set at 60C to start fan. Due to this CPU gets hot and temperature goes over 80C. In this situation, fan does not even start to lower down CPU temperature. With updated new settings based on tuning from thermal team, start fan early at 40C for TSR0 and TSR1 so the CPU temperature stays below 80C. BUG=b:339493551 TEST=Built and tested on google/brox board Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Change-Id: I4765c13c10e436733d8c9d017085968daa561ccc Reviewed-on: https://review.coreboot.org/c/coreboot/+/82784 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-06-07mb/siemens/mc_apl1: Prefer include <soc/gpio.h> via <gpio.h>Elyes Haouas
Change-Id: If43089560a391d6a844ef1716b277e3146c66945 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2024-06-07mb/google/rex0: Restore SSD power sequencing GPIOs in ramstageSubrata Banik
This change restores the EN_PP3300_SSD GPIO configuration in the ramstage for the Rex0 variant. This is necessary to enable testing of RO lockdown scenarios on FSI'ed Screbo devices, where bootblock changes are not applicable. Additionally, ensures locking the GPIO PAD from getting misconfigured after booting to OS. BUG=b/337971452 BRANCH=firmware-rex-15709.B TEST=Able to boot google/rex with RO locked to an older version without SSD GPIO refactored, and RW is with the latest revision. Change-Id: Ia7564b14a20d00e9bb2c9466b7a737dd97f01351 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82909 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-06-07mb/google/nissa/var/pujjoga: Add wifi sar tableLeo Chou
Add AX211 and AX203 wifi sar table for pujjoga wifi sar config. Use fw_config to separate different wifi card settings. WIFI_SAR_TABLE_AX211: 0 WIFI_SAR_TABLE_AX203: 1 BUG=b:336167281 Test=emerge-nissa coreboot Change-Id: If0f542cb13e93e99960bf65d616b26cee7617a43 Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82702 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2024-06-07mb/google/nissa/var/pujjoga: Add FW_CONFIG probe for WWAN devicesLeo Chou
Add FW_CONFIG probe based on pujjoga boxster of below devices: WWAN Schematic version: 500E_GEN4S_ADL_N_MB_0418 BUG=b:336167281 TEST=Boot to OS and verify the WWAN devices is set based on fw_config. Change-Id: I94cb9ffe47888a8b7b5c6837ddfc390a1d2e77d1 Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-06-07mb/google/dedede/var/boten: Add new supported memory partLeo Chou
Add bookem new supported memory parts in mem_parts_used.txt. Generate SPD id for this part. Zilia SDVB8D8A34XGCL3N3T BUG=b:344482259 TEST=Use part_id_gen to generate related settings Change-Id: I1cbf641e2bbe4fd4eea02a1bfa3d6b3c06e567e4 Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82783 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-06-07spd/lp4x: Add SPD for Zilia SDVB8D8A34XGCL3N3TLeo Chou
This adds support for Zilia SDVB8D8A34XGCL3N3T LP4x chips. Generatd SPD data with: util/spd_tools/bin/spd_gen spd/lp4x/memory_parts.json lp4x BRANCH=None BUG=344482259 Change-Id: I4408e62ab2a15002960c1d9659ab6af45bd7f7bb Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-06-07mb/google/brask/var/bujia: fix type-c USB2 problemShon Wang
Enable type-c port 0 USB2 function. BUG=b:327549688 TEST= USE="-project_all project_bujia" emerge-brask coreboot Change-Id: I0d7adc329a8c26941957d7a7472a5166b07bda5b Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82903 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-07mb/starlabs/*: Add Kconfig values for battery informationSean Rhodes
Add Kconfig strings for the battery: * Model * OEM * Technology Change-Id: Ibbce87ad54874f490af45c41f31956a7e9e996f3 Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81401 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-07mb/starlabs/labtop/cml: Increase TCC OffsetSean Rhodes
These values were configured based on a default value of 110, but for CML, it's actually 100. Adjust it accordingly. Change-Id: Ibffeeab67a7277625db9bdedca36d759ff0e72f6 Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81414 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-07mb/starlabs/starbook/kbl: Configure the TCC Offset based on Power ProfileSean Rhodes
Configure the TCC Offset based on the active power profile Change-Id: I58940441a7cefc7a2a07e5e9f7e8a15cb8730ef3 Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2024-06-07mb/starlabs/starbook/kbl: Use function for getting power profileSean Rhodes
All other variants use a function and definitions to get the power profile. Make this board to the same. Change-Id: I07ce71e20bd71229bb0cd3438ab59140cd0d8b42 Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81412 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-07mb/starlabs/starbook/cml: Switch to the merlin ECSean Rhodes
Change-Id: I27062c38c10df1d03f563b2f5391f79a3b6ee4fe Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81411 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-07ec/starlabs/merlin/ite: Remove unused <pc80/keyboard.h>Elyes Haouas
Change-Id: I3eea1a6d5bf652b9d9b430e9cd59ef9a3ea9fe2f Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82408 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2024-06-07spd/lp5: Add SPDs for MT62F1G32D2DS-023 WT:C and K3KL8L80DM-MGCUKun Liu
Add MT62F1G32D2DS-023 WT:C and K3KL8L80DM-MGCU in the memory_parts.json and re-generate the SPD Micron:MT62F1G32D2DS-023 WT:C Samsung:K3KL8L80DM-MGCU BUG=b:337730271 TEST=util/spd_tools/bin/spd_gen spd/lp5/memory_parts.json lp5 Change-Id: Ic5c3ed46829330f83e144cf8d18be6fa808431aa Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82604 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-06-07soc/intel/common/uart: Drop chip in favor of devicetree opsArthur Heymans
It is now possible to hook up device ops directly to devices in devicetree which removes the need for a fake chip. This also fixes Hermes booting as the PCI ops were incorrectly hooked up to a dummy device. The intel uart driver was requesting a resource from the generic device and died since it does not exist: [EMERG] GENERIC: 0.0 missing resource: 10 This was broken in commit b9165199c32a (mb/prodrive/hermes: Rework UART devicetree entry). Change-Id: I3b32d1cc52afaed2a321eea5815f2957fe730f79 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82940 Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2024-06-07mb/**/hda_verb: Use `AZALIA_PIN_CFG_NC(0)`Angel Pons
Replace `0x411111f0` with `AZALIA_PIN_CFG_NC(0)`, which evaluates to the same value and conveys additional information to the reader. Done with a bulk search and replace operation. Change-Id: Ibd84daec017bc1ab1ee4edd906fda80231c134cc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82394 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-06-07soc/intel/alderlake: select Kconfig MRC_CACHE_USING_MRC_VERSIONRonak Kanabar
This patch introduces support for storing the MRC cache based on the MRC version for both ADL-N and TWL platforms. It select the MRC_CACHE_USING_MRC_VERSION option when client SOC_INTEL_ALDERLAKE_PCH_N is chosen. BUG=b:296433836 Change-Id: Icc7e4ecd84a7d2818d54acc6ac5d0592544bb9ce Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81038 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Brandon Weeks <bweeks@google.com>
2024-06-07intel/alderlake/Kconfig: Use vendorcode headers for Client ADL-N FSPRonak Kanabar
This patch is to switch Client ADL-N FSP headers to vendorcode from IOT headers. Also guard IOT headers & bin path with FSP_TYPE_IOT Kconfig. BUG=b:296433836 TEST=Able to build and boot google/nivviks Change-Id: I1ffcc3f284c213ff0533de3a0e228aacf523b380 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-06-07mb/cwwk/adl: Select FSP_TYPE_IOTRonak Kanabar
Currently, the 3rdparty/fsp submodule contains only the IoT FSP for ADL-N. However, coreboot's Kconfig is incorrectly applying the IoT FSP for both Client and IoT configurations, despite the Client FSP requiring distinct headers. The CWWK CW-ADL-4L-V1.0 board relies on the FSP provided by the 3rdparty/fsp submodule, which means it has been using the IoT FSP by default. To ensure the board continues to use the correct FSP as we plan to introduce Client FSP headers into vendorcode, we are now explicitly select FSP_TYPE_IOT for the CWWK CW-ADL-4L-V1.0 board. Change-Id: Ie3844cb24740e4d95ee835a44e55b4d5cb6854e5 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82915 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Brandon Weeks <bweeks@google.com>
2024-06-07mb/aoostar/wtr_r1: Select FSP_TYPE_IOTRonak Kanabar
Currently, the 3rdparty/fsp submodule contains only the IoT FSP for ADL-N. However, coreboot's Kconfig is incorrectly applying the IoT FSP for both Client and IoT configurations, despite the Client FSP requiring distinct headers. The aoostar/wtr_r1 board relies on the FSP provided by the 3rdparty/fsp submodule, which means it has been using the IoT FSP by default. To ensure the board continues to use the correct FSP as we plan to introduce Client FSP headers into vendorcode, we are now explicitly select FSP_TYPE_IOT for the aoostar/wtr_r1 board. Change-Id: I68feeaaffd825013ae1012694047b067535e7341 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82914 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-07soc/intel/alderlake: Guard PchPcieClockGating & PchPciePowerGating UPDsRonak Kanabar
PchPcieClockGating & PchPciePowerGating UPDs are not available for ADL_N FSP headers. Add guard to Avoid PchPcieClockGating & PchPciePowerGating programming for ADL_N FSP. Change-Id: I2f1625038896b07c354498fe431cad97fb9b5bdb Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82917 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-06-06nb/intel/haswell: Synchronize lists of graphics PCI IDsNico Huber
Both, the list of IDs that we hooked our driver up to and the list that we use for VBIOS mapping, had gaps. Fill those. Change-Id: I97c09bb113cf0f35ae158abbd0ba2632dbad7cad Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-06-06doc/distributions: Update NovaCustom domainFelix Singer
NovaCustom's official domain changed to novacustom.com. Update the reference accordingly. Change-Id: I1fe9c3a2e3335d0ea5a5352cc1948b1a82c327ec Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82159 Reviewed-by: Wessel klein Snakenborg Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-06mb/siemens/chili: Remove superfluous device entries from dtFelix Singer
Remove the entries which have the same state as the ones from the chipset devicetree. Change-Id: I4981cd835ef28a673d480808dd486fed4d9b45e5 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2024-06-06arch/io.h: Add port I/O functions to other architecturesAlper Nebi Yasak
The QEMU Bochs display driver and the QEMU Firmware Configuration interface code (in the qemu-i440fx mainboard dir) were written for x86. These devices are available in QEMU VMs of other architectures as well, so we want to port them to be independent from x86. The main problem is that the drivers use x86 port I/O functions to communicate with devices over PCI I/O space. These are currently not available for ARM* and RISC-V, although it is often still possible to access PCI I/O ports over MMIO through a translator. Add implementations of port I/O functions that work with PCI I/O space on these architectures as well, assuming there is such a translator at a known address configured at build-time. Change-Id: If7d9177283e8c692088ba8e30d6dfe52623c8cb9 Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80372 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2024-06-06mb/google/brox/var/lotso: Add dq map settingJian Tong
Based on lotso EVT schematics add dq map settings. BUG=b:333494257 TEST=emerge-brox coreboot chromeos-bootimage and boot on Change-Id: I4f03e8a90522cbf2fe06f4160414202dcc4a2199 Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82600 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Dengwu Yu <yudengwu@huaqin.corp-partner.google.com>
2024-06-06mb/asrock: Add Z87E-ITX (Haswell)Nicholas Chin
This was done using Haswell autoport, with manual fixes to get the output to build against current main. I do not physically have this board; I was sent the output of autoport with some fixes on top of which I added additional changes. The VBT was copied from /sys/kernel/debug/dri/0/i915_vbt on version 2.70 of the vendor firmware. The flash chip is 8MiB in a socketed DIP8 package, making it easy to externally flash to recover from a brick. Working: - Haswell MRC.bin - S3 suspend and resume - Libgfxinit - HDMI - DVI-I (including passive DVI to VGA adapter) - DisplayPort - SATA ports - mSATA SSD - mPCIe WiFi slot - Rear USB ports - USB 3.0 header - Audio header - Ethernet - x16 PCIe slot - EHCI debug with the CH347 (top USB 2.0 port by the PS/2 connector) - edk2 (MrChromebox uefipayload_202309) Not Tested: - PS/2 keyboard/mouse - eSATA - USB 2.0 header Change-Id: I56c22d8f5505f9a4da25f8b4406b00978af1a586 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81022 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-06mb/intel/coffeelake_rvp: Prefer include <soc/gpio.h> via <gpio.h>Elyes Haouas
Change-Id: I98aa3f582963f76690f907b678ac322ed4cc99d1 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82846 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-06mb/starlabs/starbook: Prefer include <soc/gpio.h> via <gpio.h>Elyes Haouas
Change-Id: I972516443bc57e193aefd54516ca994087d92054 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2024-06-05cpu/x86: Make 1GB paging the defaultJulius Werner
This patch flips the polarity of CONFIG_USE_1G_PAGES_TLB into CONFIG_NEED_SMALL_2MB_PAGE_TABLES which is off by default, meaning CPUs added in the future will automatically build the smaller 1GB pages. We can expect support for this feature to be available on all future CPU generations (with the possible exception of embedded edge cases), so this default setting should make mistakes less likely and keep maintenance effort lower. (Besides, enabling the support where it doesn't work fails fast, whereas keeping it disabled where it could work is an inefficiency that can easily go overlooked for a long time.) While this is technically a CPU feature, not a northbridge feature, we support a lot more individual CPUs than northbridges in the pre-SoC era, and they tend to be closely coupled anyway. So select the option at the northbridge level for older CPUs to keep things simpler. Change-Id: I2cf1237a7fb63b8904c2a3d57fead162c66bacde Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2024-06-05payloads/external/leanefi: Add missing licenseMaximilian Brune
Change-Id: Ib95cb55add23fa172f187cbcb475958767f8a923 Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82905 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-05mb/google/brox/var/lotso: Update gpio settingJian Tong
Based on lotso EVT schematics update gpio settings. BUG=b:333494257 TEST=emerge-brox coreboot chromeos-bootimage and boot on Change-Id: I13485cc7ccd8b15352f5e21ad9336aa2b3d35749 Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82573 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Shelley Chen <shchen@google.com>
2024-06-053rdparty/intel-microcode: Update submodule to upstream mainFelix Singer
Updating from commit id 41af345: 2024-03-11 19:11:14 -0600 - (microcode-20240312 Release) to commit id 5278dfc: 2024-05-31 18:42:47 -0600 - (microcode-20240531 Release) This brings in 2 new commits: 5278dfc microcode-20240531 Release 27ace91 microcode-20240514 Release Change-Id: Ia34ba03a9c2f206be760133edbbadcc541ff273b Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2024-06-05libpayload/arm64: Support FEAT_CCIDXYidi Lin
ARM SoC supports FEAT_CCIDX after ARMv8.3. The register field description of CCSIDR_EL1 is different when FEAT_CCIDX is implemented. If numsets and associativity from CCSIDR_EL1 are not correct, the system would hang during mmu_disable(). Rather than assuming that FEAT_CCIDX is not implemented, this patch adds a check to dcache_apply_all to use the right register format. Reference: - https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/12770 BUG=b:317015456 TEST=mmu_disable works on the FEAT_CCIDX supported SoC. Change-Id: I892009890f6ae889e87c877ffffd76a33d1dc789 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82636 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-06-05arch/arm64: Support FEAT_CCIDXYidi Lin
ARM SoC supports FEAT_CCIDX after ARMv8.3. The register field description of CCSIDR_EL1 is different when FEAT_CCIDX is implemented. If numsets and associativity from CCSIDR_EL1 are not correct, the system would hang during mmu_disable(). Rather than assuming that FEAT_CCIDX is not implemented, this patch adds a check to dcache_apply_all to use the right register format. Reference: - https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/12770 BUG=b:317015456 TEST=mmu_disable works on the FEAT_CCIDX supported SoC. TEST=manually add mmu_disable to emulation/qemu-aarch64/bootblock.c and verify with the command qemu-system-aarch64 -bios \ ./coreboot-builds/EMULATION_QEMU_AARCH64/coreboot.rom -M \ virt,secure=on,virtualization=on -cpu max -cpu cortex-a710 \ -nographic -m 8192M Change-Id: Ieadd0d9dfb8911039b3d36c9419af4ae04ed814c Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82635 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-06-05mb/ibm/sbp1: Update PCIe port slot number for NICNaresh Solanki
Based on schematic, update slot number for PCIe port used for NIC controller. Change-Id: I7a1ead8f7e4588db45303041e60dbfe27ee12ea7 Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2024-06-05Xeon-SP boards: Factor out OCP VPD `get_cxl_mode()` implAngel Pons
There's two copies of the `get_cxl_mode()` function to map the OCP VPD value to the values expected by platform code. As this is unnecessary, have a single copy of this function in the OCP VPD driver code. As the `get_cxl_mode()` function is Xeon-SP only, keep it in a separate file. This change simplifies things for boards using OCP VPD for CXL and has no impact for boards *not* using OCP VPD: - Boards not using OCP VPD can still define get_cxl_mode() in mainboard code as needed, just like they were able to do before. - Boards using OCP VPD but without CXL (`SOC_INTEL_HAS_CXL` is not enabled), this code won't get compiled in at all (see `Makefile.mk`). - Boards using OCP VPD and CXL will automatically make use of this `get_cxl_mode()` definition, which should be the same for all boards. It is possible that this may need to be expanded/adapted in the future, which is easy to handle in a follow-up commit when the need arises. TEST=Build and boot on intel/archercity CRB Change-Id: I935c4eb5b2392e2d0dc01b9f66d46c79b8141ea7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82224 Reviewed-by: Shuo Liu <shuo.liu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-06-05soc/intel/xeon_sp: Remove duplicated Kconfig POSTCAR_STAGEJincheng Li
POSTCAR_STAGE is already selected in XEON_SP_COMMON_BASE Change-Id: I3f94e6cc76c8f376119ffa8ec43fa1a43fb40977 Signed-off-by: Jincheng Li <jincheng.li@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82795 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-06-05mb/google/trulo/var/orisa: Configure TPM IRQ for orisaAmanda Huang
Set GSC_SOC_INT_ODL to GPP_A17 instead of GPP_A13. BUG=b:333486830 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: I065fdf2a66036c6df1e16dda3b2a684b5202cccc Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82717 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-04mb/starlabs/lite: Prefer include <soc/gpio.h> via <gpio.h>Elyes Haouas
Change-Id: Ib8f7ac7e586390a1d25cbe84d6d4c3ba31ff078f Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2024-06-04soc/intel/xeon_sp: Prefer include <soc/gpio.h> via <gpio.h>Elyes Haouas
Change-Id: I950b8859b51fb61edc0cf1115f6665378bc0b836 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82887 Reviewed-by: Shuo Liu <shuo.liu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-04soc/mediatek/common: Prefer include <soc/gpio.h> via <gpio.h>Elyes Haouas
Change-Id: I50e874790dedcb6bf3b3ac8368821f22611aa3b7 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82894 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-04payloads/external/leanefi/Makefile: Fix clean targetMaximilian Brune
Just follow the examples of other payloads and simply remove the build directory of said payload. Change-Id: Idf2a8f3b9ecbb300514d2d1deede76785fd402b7 Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82897 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-06-04mb/google/brya/var/xol: Enable FSP UPD LpDdrDqDqsReTrainingSeunghwan Kim
Set LpDdrDqDqsReTraining to 1 for xol. Value 0 will cause black screen issue. Reference: https://review.coreboot.org/c/coreboot/+/79527 > FSP default value for LpDdrDqDqsReTraining is 1. For boards > that didn't set LpDdrDqDqsReTraining to any value, 0 was being > assigned and it caused black screen issue. BUG=b:332980211 BRANCH=brya TEST=Built and verified there is no black screen issue during power on/off test for over 100 cycles. Change-Id: Ia346ce559b4509ea1a63abe28b12ad909f9b7b0d Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82778 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-06-04mb/google/brask/var/bujia: change ALC5650 to ALC5682I-VSShon Wang
Due to system spec change, change audio codec ALC5650 to ALC5682I-VS BUG=b:329787697 TEST= USE="-project_all project_bujia" emerge-brask coreboot Change-Id: I38e5c58b3ef3fbe709b98601975ae3821bb77213 Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-06-04vc/intel/fsp: Update ADL N FSP headers from v3343.05 to v5021.00Ronak Kanabar
Update generated FSP headers for Alder Lake N from v5021.00 Changes include: - Add FspProducerDataHeader.h header file - Open Usb4CmMode & CnviWifiCore Upd in FspsUpd.h - Update UPD Offset in FspsUpd.h BUG=b:296433836 TEST=Able to build and boot google/nivviks Change-Id: Ieb4cc8f2f83d8f6e821894f0ec2e56262a25743c Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82780 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-06-04Revert "vc/intel/fsp2/alderlake_n: Drop unused header files"Ronak Kanabar
This reverts commit 79503ef515967ffceab7bd2a16a381e6a02c3d30. The Intel FSP repository at https://github.com/intel/FSP.git currently lacks the Client ADL-N headers. The existing coreboot code references the "IoT/AlderLakeN/" directory for these headers, but it is missing the crucial FspProducerDataHeader.h file. Without this header, the ADL-N platform is unable to utilize the appropriate MRC version needed for updating MRC caches. This patch aims to restore the necessary FSP headers for the ADL-N platform within the vendorcode directory. Change-Id: I99e9d5a07b4ca8d1666e3fd50d3d363ed5d4618e Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-06-04util/xcompile: Use new GCC's warning options only if supportedElyes Haouas
Wflex-array-member-not-at-end & Wcalloc-transposed-args are not supported when using GCC older than GCC-14. Use them only when supported. Change-Id: I11c1e729569c8130bd254a10454c5066a72974d6 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82785 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 16:53:43 +0000