| Age | Commit message (Collapse) | Author |
|---|
|
Add a new driver for NXP UWB SR1xx (e.g., SR150) device.
The driver was originally written by Tim Wawrzynczak as a WIP in
CL:3503703, and was based on drivers/spi/acpi.
BUG=b:240607130
BRANCH=firmware-brya-14505.B
TEST=On ghost (with follow-up CL), patch linux with NXP's pending
drivers
-> UWB device is probed and can respond to a simple hello
packet
Co-authored-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I5b1b0a5c1b48d0b09e7ab5f2ea6b6bc2fba2a7d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66466
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add OV 5675 MIPI camera to ghost, sensor eeprom, and IPU device to
device tree. Enable config for MIPI camera.
BUG=b:241343306
BRANCH=firmware-brya-14505.B
TEST=with ghost overlay changes, camera in camera app works
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: Ie079e43ae0f34efba396331922ea4a89eda72128
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66473
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This reverts commit 8b1c6c6cb384c89659abbd043c2566df358d8f95. With
updated APCB, eSPI configuration carries over to bootblock. Hence eSPI
does not need to be re-initialized in bootblock.
BUG=b:241426419
TEST=Build and boot to OS in Skyrim with PSP verstage.
Cq-Depend: chrome-internal:4929421
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I426b07329d4a0154d915381c99dcc9746b7a3d7c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Introduce the `BROADWELL_LPDDR3` Kconfig option along with some wrapper
code to allow mainboards using LPDDR3 DRAM to supply the DQ/DQS maps to
chipset code without having to use `pei_data`. The only mainboard using
LPDDR3 is Google Samus.
Change-Id: I0aaf0ace243c03600430c2a7ab6389a7b20cb432
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55812
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Mainboards do not need to know about `pei_data` to tell northbridge code
where to find the SPD data. As done on Haswell, add the `mb_get_spd_map`
function and the `struct spd_info` type to retrieve SPD information from
mainboard code without having to use `pei_data` in said mainboard code.
Unlike Haswell MRC, Broadwell MRC uses all positions of the `spd_data`
array, not just the first. The placeholder SPD address for memory-down
seems to be different as well. Adapt the existing code to handle these
variations. Once complete, the abstraction layer for both MRC binaries
will have the same API.
Change-Id: I92a05003a319c354675368cae8e34980bd2f9e10
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The `ddr_refresh_2x` setting is already set in chipset code.
Change-Id: I76478689b3aa27c369a0413d9fbde03674d5e528
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55810
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There's no generic way to tell whether a mainboard has an EC or not.
Making Kconfig symbols for these options seems overkill, too. So, just
put them on the devicetree. Also, drop unnecessary assignments when the
board's current value is zero, as the struct defaults to zero already.
Change-Id: I8d3b352333bea7ea6f7b0f96d73e6c2d7d1a2cfb
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55809
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The SPD file handling code is generic and can be used on any other
mainboard. Move it to chipset scope to enable code reuse.
Change-Id: I85b1460ccb82f0c1bf409db4a6b4c9355c25e76d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55808
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Introduce the `SPD_MEMORY_DOWN` macro to indicate that a slot is used
with memory-down. This enables computing the channel disable masks as
the bits for slots where the SPD address is zero. To preserve current
behavior, zero the SPD addresses for memory-down slots afterwards.
Change-Id: I75b7be7c72062d1a26cfc7b09b79de62de0a9cea
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55807
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is the version of genrelnotes that was used to help with the
4.16 release.
- Fix shellcheck issues.
- Send messages for the user to STDERR.
- Add recent platforms
- Handle symbolic links to the git repo.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I2204793a5d1cc5792d0720d2bbfb172bb6020dd4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62440
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
To generate a complete _CPC ACPI object, coreboot needs the minimal and
nominal core speed values which are specific to the CPU and not only the
CPU family. Since this is done by an undocumented mechanism, FSP has to
do this and puts the information we need into a HOB. This adds the HOB
GUID and the structure of the HOB data.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Change-Id: Ibf338c32de367a3fd57695873da1625338fa196d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66549
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the path after the chip keyword needs to point to the directory
that contains the chipset's chip.h file, change this from
soc/amd/rembrandt to soc/amd/mendocino.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I63334fbd59e74df491035b5cf7e296818cc02665
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66688
Reviewed-by: ritul guru <ritul.bits@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
These files contain no creative content, and therefore have no
copyright. This effectively means that they are in the public
domain.
This commit updates the unlicensable empty (and effectively empty)
files with the CC-PDDX identifier for license compliance scanning.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I0b76921a32e482b6aed154dddaba368f29ac2207
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66497
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support for signed 64-bit division. The implementation mostly
relies on __aeabi_uldivmod, which is already implemented.
ldivmod.S was adapted from CrOS EC version of ldivmod.S:
https://chromium.googlesource.com/chromiumos/platform/ec/+/main/third_party/libaeabi-cortexm0/core/cortex-m0/ldivmod.S
The CrOS EC version was adapted from:
https://github.com/bobbl/libaeabi-cortexm0/blob/master/ldivmod.S
BUG=b:240316722
BRANCH=None
TEST=Signed division works in PSP verstage (runs on ARM)
Change-Id: I53785c732b0fa35a4809bc054f1482c5461ada7b
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66207
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
A 32-bit long storing microseconds will rollover every ~1.19 hours.
This can cause stopwatch to misbehave, causing unexpected failures.
If the current field in stopwatch is near 2^31, the expires field may
rollover when initialized. If this occurs, stopwatch_expired() will
instantly return true.
If current and expires fields are near 2^31, the current field could
rollover before being checked. In this case, stopwatch_expired() will
not return true for over an hour. Also stopwatch_duration_usecs() will
return a large negative duration.
This issue has only been observed in SMM since it never takes more
than 35 minutes to boot.
Switching to uint64_t mitigates this issue since it will not rollover
for over 500K+ years. The raw TSC would rollover sooner than this,
~200 years, depending on the tick frequency.
BUG=b:237082996
BRANCH=All
TEST=Boot Nipperkin
Change-Id: I4c24894718f093ac7cd1e434410bc64e6436869a
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65403
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Move the code that prints the edk2 build options to it's own recipe
so that it can be called for different targets.
This change also fixes the print, as it accounts for recent switches
such as `--pcd` and `-s`.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie797ca26cd28eab0f633bd8dee5ec19634fcea99
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66354
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
DFD (Design for Debug) is a debugging tool, which scans flip-flops
and dumps to internal RAM on the WDT reset. After system reboots,
those values can be shown for debugging using MTK internal parsing
tools.
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I6d19dc6f4e47ed69ba2ea87c79984020a413aee9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66586
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We use the same dump address and size for DFD in all MediaTek SoCs, so
we move them to dfd_common.h and rename dfd_common.h to dfd.h.
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I162bbb0a82e3b55c8cfbbd20e28a54ad01fd6b0d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66585
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ie9d7b361dda8c5850bc0682c255bc20f9e26675c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66668
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tracker is a debugging tool. When bus timeout occurs, the system will
reboot and latch some values of tracker registers which could be used
for debugging.
This function will be triggered only when it encounters the bus
hanging issue.
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I78f676c08ea44e9bb10bd99bbfed70e3e8ece993
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66584
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This replaces 'SPDX-License-Identifier' tags in all the files under
soc/mediatek/mt8188 for better code re-use in other open source
software stack.
These files were originally from MediaTek and follow coreboot's main
license: "GPL-2.0-only". Now MediaTek replaces these files to
"GPL-2.0-only OR MIT" license.
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Change-Id: If61e8b252400e8e5ecd185b6806b1ca279065f15
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66628
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
A power and performance analysis performed on Alder Lake demonstrated
that with an EPP (Energy Performance Preference) at 50% along with
EET (Energy Efficient Turbo) disabled, the overall SoC performance are
similar or better and the SoC uses less power.
For instance some browser benchmark results improved by 2% and some
multi-core tests by 4% while at the same time power consumption
lowered by approximately 7.6%.
Similar results are observed on Raptor Lake.
BRANCH=firmware-brya-14505.B
BUG=b:240669428
TEST=verify that EPP is back to the by default 50% setting
`iotools rdmsr 0 0x774'
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: I735ad9d88c7bf54def7a23b75abc4e89a213fb61
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66282
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhixing Ma <zhixing.ma@intel.com>
Reviewed-by: Selma Bensaid <selma.bensaid@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This reverts commit 938f33e9f7756d730a1da278679087476a476bf2.
A power and performance analysis performed on Alder Lake demonstrated
that with an EPP (Energy Performance Preference) at 50% along with
EET (Energy Efficient Turbo) disabled, the overall SoC performance are
similar or better and the SoC uses less power.
For instance some browser benchmark results improved by 2% and some
multi-core tests by 4% while at the same time power consumption
lowered by approximately 7.6%.
BRANCH=firmware-brya-14505.B
BUG=b:240669428
TEST=verify that EPP is back to the by default 50% setting
`iotools rdmsr 0 0x774'
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: Icacc555e62533ced30db83e0a036db1c85c0bfa6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66283
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhixing Ma <zhixing.ma@intel.com>
Reviewed-by: Selma Bensaid <selma.bensaid@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This reverts commit 844dcb3725fc95df53a7229703f5059d2c36f98e.
A power and performance analysis performed on Alder Lake demonstrated
that with an EPP (Energy Performance Preference) at 50% along with
EET (Energy Efficient Turbo) disabled, the overall SoC performance are
similar or better and the SoC uses less power.
For instance some browser benchmark results improved by 2% and some
multi-core tests by 4% while at the same time power consumption
lowered by approximately 7.6%.
BRANCH=firmware-brya-14505.B
BUG=b:240669428
TEST=verify that ETT is disabled
`iotools rdmsr 0 0x1fc'
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: I96a72009aaf96d4237d57f4d5c8b1f41f87174d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66281
Reviewed-by: Zhixing Ma <zhixing.ma@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Selma Bensaid <selma.bensaid@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The patch disables PCH USB2 Phy power gating to prevent possible display
flicker issue for taniks board. Please refer Intel doc#723158 for
more information.
BUG=b:241965786
TEST=Verify on taniks boards.
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: Ib95430c7ba9d84f8bafcb1febcff9b4e4038cadc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66622
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Moli has 90W adapter for 15W SOC and 135W adapter for 28W SOC, so modify the Psys_PL2 for both 15W and 28W SOC.
-set 90W Psys_PL2 for 15W SOC
-set 135W Psys_PL2 for 28W SOC
BUG=b:242119726
TEST=emerge-brask coreboot
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: If8f9006d797d74f6d5d802d445edc425a4700420
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Unassigned tag is defined to emulate an unmapped PCI BAR resource.
This resource is not mapped into host physical address and hence
should not be picked up by memranges_add_resources().
Change-Id: If7a5c437d486b80d798496b985efd80526f13c63
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66451
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Dabros <jsd@semihalf.com>
|
|
It's possible that some BARs are not got their resource successfully
mapped, e.g. when these BARs are too large to fit into the available
MMIO window.
Not assigned resources might be with base address as 0x0. During
global resource search, these not assigned resources should not be
picked up.
One example is MTRR calculation. MTRR calculation is based on global
memory ranges. An unmapped BAR whose base is left as 0x0 will be
mistakenly picked up and recognized as an UC range starting from 0x0.
Change-Id: I9c3ea302058914f38a13a7739fc28d7f94527704
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66347
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
IORESOURCE_ASSIGNED is used to indicate the resource is actually mapped
host physical address space. E.g. PCI BAR resources not mapped are
not regarded as assigned.
In src/include/device/device.h, standard macros, e.g. ram_resource,
mmio_resource, io_resource, et al, are all following the usage above.
This patch updates the bootmem-test and memrange-test to follow the
usage as well.
Change-Id: Ifc19302482038267cef01321a46a72d90ca76d35
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66450
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Jan Dabros <jsd@semihalf.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I251840b409dead62586cefe5856b6c544401ba30
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Enable CRB_TPM to allow the use of the fTPM (Intel PTT).
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I7b69854ea636947480402ce12450f431028660a2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66342
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
coreboot uses TianoCore interchangeably with EDK II, and whilst the
meaning is generally clear, it's not the payload it uses. EDK II is
commonly written as edk2.
coreboot builds edk2 directly from the edk2 repository. Whilst it
can build some components from edk2-platforms, the target is still
edk2.
[1] tianocore.org - "Welcome to TianoCore, the community supporting"
[2] tianocore.org - "EDK II is a modern, feature-rich, cross-platform
firmware development environment for the UEFI and UEFI Platform
Initialization (PI) specifications."
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4de125d92ae38ff8dfd0c4c06806c2d2921945ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65820
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The Cezanne CPPC ACPI table generation code also applies to Sabrina, so
move it to the common AMD SoC code directory so that it can be used for
Sabrina too.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5ce082a27429948f8af7f55944a1062ba03155da
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66400
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This reverts commit Ic152c295954d33ef1acddb3b06f0c6bbfbfb38ae.
There was a bug that caused the SMU to hang when writing port80. it has
since been resolved, so revert this workaround.
BUG=b:227201571
TEST=Build and boot to OS in Skyrim.
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I5f10e282ab03756c7dbfb48182940f979eb122e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66470
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
We want to extend the vb2ex_hwcrypto APIs on the vboot side to allow
passing 0 for the data_size parameter to vb2ex_hwcrypto_digest_init()
(see CL:3825558). This is because not all use cases allow knowing the
amount of data to be hashed beforehand (most notable the metadata hash
for CBFS verification), and some HW crypto engines do not need this
information, so we don't want to preclude them from optimizing these use
cases just because others do.
The new API requirement is that data_size may be 0, which indicates that
the amount of data to be hashed is unknown. If a HW crypto engine cannot
support this case, it should return VB2_ERROR_EX_HWCRYPTO_UNSUPPORTED to
those calls (this patch adds the code to do that to existing HW crypto
implementations). If the passed-in data_size value is non-zero, the HW
crypto implementation can trust that it is accurate.
Also reduce a bit of the console spew for existing HW crypto
implementations, since vboot already logs the same information anyway.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ieb7597080254b31ef2bdbc0defc91b119c618380
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66621
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Found by:
find payloads/libpayload/drivers/usb -type f -name "*.[ch]" | xargs \
util/lint/checkpatch.pl --types SPACING -q --fix-inplace -f
Change-Id: Id23e2e573e475c6d795812a4b2df9aeffbcaaaf4
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66596
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch disables PCH USB2 Phy power gating to prevent possible display
flicker issue for taeko board. Please refer Intel doc#723158 for
more information.
BUG=b:241965786
TEST=Verify on taeko/tarlo boards.
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I03042906d5bea9b9010016adb98fbe68e2dc92f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66582
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
When removing SD card from USB card reader, the USB MSC stack does
not detach the device immediately. Instead, the USB MSC stack calls
usbdisk_remove() and calls usb_msc_destroy() after several pollings.
It results in usbdisk_remove() being called twice.
Since the usbmsc_inst_t instance is freed after first usbdisk_remove()
call, the second call invokes an invalid usbmsc_inst_t instance and
causes exception in CPU.
This patch prevents usbdisk_remove() from being called twice by setting
usbdisk_created to zero.
BUG=b:239492347
TEST=insert an empty SD card into the USB card reader then remove
the SD card. AP firmware does not crash.
Change-Id: I0675e9fde3e770d63dd0047928356a204245ef18
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66449
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When powering down SSUSB, the system needs to wait the ACK from SSUSB.
We found that the setting of USB PAD top macro is not correct and
it will cause timeout waiting for the ACK from SSUSB.
To resolve this, we add mt_pll_set_usb_clock() in pll.c to enable usb
macro control for powering down SSUSB.
TEST=timeout of ssusb powerdown ack does not occur.
BUG=b:239634625
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.corp-partner.google.com>
Change-Id: I58ba86e0467284e9947bfda1005c151a3e0c8881
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66600
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add new ram_id:0001 for memory part H9HCNNNCPMMLXR-NEE.
BUG=b:241494931
TEST=none
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: Iee9f881d8ab21396d208a6af9f0cec8414cb50a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
- ADP_P_* -> RPP_S_* (got mixed up I guess)
- Remove duplicates of ADP_S_ESPI_*
- Add infix _ESPI_ to all ADP_S device ID's
Document: 619362
Change-Id: Ic18ecbd420fc598f0ef6e3cf38e987ac3ae6067e
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66629
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
R680E, Q670E, H610E are the ADL-S IoT variants
TEST=Boot ADL-S RVP DDR5 and see silicon info is reported
as PCH: AlderLake-S R680E
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I1804994b4b72f0484eabb15323736679d2668078
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This change provides access to IOE through P2SB Sideband interface for
Meteor Lake TCSS functions of pad configuration and Thunderbolt
authentication. There is a policy of locking the P2SB access at the end
of platform initialization. The tbt_authentication is read from IOM
register through IOE P2SB at early silicon initialization phase and its
usage is deferred to usb4 driver.
BUG=b:213574324
TEST=Built coreboot and validated booting to OS successfully on MTLRVP
board. No boot hung was observed.
Change-Id: Icd644c945bd293a8b9c4a364aaed99ec4a7c12f9
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66410
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Delete the Thunderbolt authentication function ioe_tcss_valid_tbt_auth
from the common block. Meteor Lake Platform will implement it.
BUG=b:213574324
TEST=Built coreboot image successfully.
Change-Id: I97a289faa6351fe562f91d8478b72c9403ce88cb
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
DDR5 memory modules have two separate 32-bit channels (40-bit on ECC
memory modules), and the SPD info refers to one channel: the primary
bus width is 32 (or 40) bits and the "DIMM size" is halved. On Alder
Lake, there are 2 memory controllers with 4 32-bit channels each for
DDR5. FSP has 16 positions to store SPD data, some of which are only
used with LPDDR4/LPDDR5.
To try to make things less confusing, FSP abstracts the DDR5 channels
so that the configuration works like on DDR4. This is done by copying
each DIMM's SPD data to the other half-channel. Thus, fix the wrapper
parameters for DDR5 accordingly.
Tested on AlderLake-P DDR5 RVP (board ID 0x12), both DIMM slots now
function properly. Without this patch, only the top slot would work.
Change-Id: I5f01cd77388b89ba34d91c2dc5fb843fe9db9826
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66608
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Use the actual model name for the variant dir.
Change-Id: I199b8efb5c3cddb8943ba4b761546caa11c67a30
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66167
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Enable RFIM Policy, request by RF team.
BUG=b:239657092
TEST=emerge-nissa coreboot
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: Id0f425d75a1ac9486a9284d4e8320ba4c63b182f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
|
|
Consolidate MAX_BIOS_ENTRIES and MAX_PSP_ENTRIES definitions into one
file
Signed-off-by: Altamshali Hirani <al.hirani@amd.corp-partner.google.com>
Change-Id: Ie3c64a1875010e7fb368967283df6baf1cc7ba8d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62911
Reviewed-by: ritul guru <ritul.bits@gmail.com>
Reviewed-by: Bao Zheng <fishbaozi@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update coreboot.org PSP Firmware Documentation with current internal
PSP documentation.
Signed-off-by: Altamshali Hirani <al.hirani@amd.corp-partner.google.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Change-Id: I677f86614b0fdc6377fb2e27932ed3a8ded27102
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
'Mendocino' was an embargoed name and could previously not be used.
Update amdfwtool for consistency with the correct naming convention.
BUG=b:239072117
TEST=Builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I404fcf59e89b75cd2488bcb51981aee2eb4ff0df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66468
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch backported from commit ba2e51bd496a (mb/google/brya: brya0:
Add ACPI support for Type-C ports) for google/rex.
BUG=b:224325352
TEST=Able to build Google/Rex and boot on MTLRVP.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: If0a9510784e8f62861ae4bc74805b1513a4865cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66538
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
This patch describes the USB2/3 ports in devicetree to generate ACPI
code at runtime. The ACPI code includes the port definition, location,
type information.
BUG=b:224325352
TEST=Able to build and boot MTLRVP.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I7d787a9986099852d6a0d193bbc28487bf430fe4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66542
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch backport commit 9e23d017f555bad (mb/google/brya: Update
mainboard properties for BB retimer upgrade) for Google/Rex.
BUG=b:224325352
TEST=Able to build and boot MTLRVP.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I508858683cf3cdb0cab5a564fef4a242f8a6679e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66541
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch describes the TCSS USB ports in devicetree to generate ACPI
code at runtime. The ACPI code includes the port definition, location,
type information.
BUG=b:224325352
TEST=Able to build and boot MTLRVP.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I08613b31aad47cbf573ed1b5fc68c91cf973e190
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66540
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch adds OC pin programming for USB2 Port 8.
BUG=b:224325352
TEST=Able to build and boot MTLRVP.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic9dcaef5972d6c0e9fe264445ea10fcd9a82619f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66543
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Enable SOC_INTEL_GFX_NON_PREFETCHABLE_MMIO for MTL to fix guc driver
failure.
BUG=b:241746156
TEST=boot to OS and check guc driver loading successful
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ifc20935bccdda55db3e57eecd37a4260b3f1a2d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66613
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
From Meteorlake, IGD BAR0(GTTMMADR) is changed to 64bit prefetchable.
Due to the prefetchable attribute, resource allocation for IGD BAR0 is
assigned WC memory and it causes kernel driver failure.
For avoiding kernel driver failure, ignore prefetch PCI attribute
for IGD BAR0 to assign UC memory.
We're working on publishing below information.
- IGD BAR0(GTTMMADR) is changed to 64bit prefetchable BAR
- GTTMMADDR BAR should be always mapped as UC memory although
marked Pre-fetchable.
BUG=b:241746156
TEST=boot to OS and check guc driver loading successful
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I76d816d51f32f99c5ebcca54f13ec6d4ba77bba5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66403
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
'Mendocino' was an embargoed name and could previously not be used.
Update amdfwtool for consistency with the correct naming convention.
BUG=b:239072117
TEST=Builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I673a9b99d207603b605756fc7d277c54c5d0f311
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66467
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
'Mendocino' was an embargoed name and could previously not be used
in references to Skyrim. coreboot has references to sabrina both
in directory structure and in files. This will make life difficult
for people looking for Mendocino support in the long term. The code
name should be replaced with "mendocino".
BUG=b:239072117
TEST=Builds
Cq-Depend: chromium:3764023
Cq-Depend: chromium:3763392
Cq-Depend: chrome-internal:4876777
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I2d0f76fde07a209a79f7e1596cc8064e53f06ada
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I568a357b40e8bb69b2b26752d241f06adfbe029e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66503
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
This adds SPDX identifiers to the remaining source files in the
lib directory that don't already have them.
A note on gcov-iov.h - As machine generated content, this file is
believed to be uncopyrightable, and therefore in the public domain, so
gets the CC-PDDC license even though there is code in the file.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Ifcb584d78a55e56c1b5c02d424a7e950a7f115dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
This adds SPDX identifiers to the remaining source files in the
include directory that don't already have them.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I0dbf4c839eacf957eb6f272aa8bfa1eeedc0886f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66501
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds SPDX identifiers to the remaining source files in the
southbridge directory that don't already have them.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: If74aa82a7c40293198e07e81ceac52bd8ca8ad27
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66500
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds SPDX identifiers to the remaining source files in the
drivers directory that don't already have them.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I97f96de857515214069c3b77f3c781f7f0555c6e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66499
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds SPDX identifiers to the remaining source files in the
mainboard directory that don't already have them.
Change-Id: I1adc204624f3ab6fcafd8fbb239e6d69e057973a
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66498
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
This change adds support for enabling VPU on MTL SoC.
BUG=b:240665069
TEST=build coreboot mtlrvp
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: Ie79b45f34a669b9ff777599cb85217abac6cb74e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
Add WiFi SAR table for joxer.
BUG=b:239788985
TEST=build FW and checked SAR table can load by WiFi driver.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: Ia8dddf454e441840233fa4405704ee1f0a8ed86c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66522
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Lance Zhao <lance.zhao@gmail.com>
Change-Id: Idc90c6e8186320979a72563fb5dcdc8fce760e72
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66562
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
FSP reports missing IRQ for devices.
Add USBOTG (D20:F1) and CrashLog & Telemetry (D10:F0) to irq_constrain.
Bug = N/A
TEST = Build and boot Siemens AS-TGL1
Change-Id: Ic02d33045a07a6888ba97d8f2c6fa71bc7e363e8
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The Creative Commons Public Domain Dedication and Certification is not
a license in the common sense in that it's stating that the associated
file is already in the public domain (having no copyright), and is not
actually putting it in the public domain like the CC-C0 license does.
The use for this in coreboot is for unlicensable files - either blank
files or files with no creative content. This allows these files to
have the SPDX identifier to identify them as having no known copyright
for open source license compliance.
If CC-PDM-1.0 is ever included in the list of SPDX licenses, that would
probably fit better, but because the public domain mark isn't actually
a license, and because "public domain" isn't well defined, CC-PDM was
rejected as a SPDX identifier.
For further information:
https://web.archive.org/web/20201018194411/https://github.com/spdx/license-list-XML/issues/988
Change-Id: Ibb300ecd066cde2a016195c2beca76a460c588e3
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66496
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
The gcov files in the lib directory are licensed GPL 3.0 with the GCC
runtime library exception.
Add this as a valid license so that the files can get a correct SPDX
identifier.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I1cf9c3125592741923c9b4481038055f24fe6ab1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66495
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
These licenses and exceptions are allowed by coreboot's license checker,
but the copies of the licenses were missing from the LICENSES directory.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Ic4233e556de08275fe50f1ec83828f9470b4b566
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66494
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
The EC used on zork uses a level high interrupt. This change configures
the polarity correctly.
The eSPI config is baked into RO verstage. The zork ToT build doesn't
use signed verstage since it's incompatible with the ToT version of
vboot. This means we can safely switch the keyboard IRQ polarity.
NOTE: Do not cherry pick this into the Zork firmware branch!
BUG=b:160595155
TEST=On morphius verify keyboard works as correctly and no spurious
interrupts are thrown on S0i3 resume. Also verified keyboard and mouse
work correctly in windows.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I8d3195522f3bd5e477635494c7156683aae0ff0a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
The default state for the IRQ lines when the eSPI controller comes out
of reset is high. This is because the IRQ lines are shared with the
other IRQ sources using AND gates. This means that in order to not cause
any spurious interrupts or miss any interrupts, the IO-APIC must use a
low polarity trigger.
On zork/guybrush/skyrim the eSPI IRQs are currently working as follows:
* On power on/resume the eSPI controller drives IRQ 1 high.
* eSPI controller gets configured to not invert IRQ 1.
* OS configures IO-APIC IRQ 1 as Edge/High.
* EC writes to HIKDO (Keyboard Data Out) which causes the EC to set IRQ1
high.
* eSPI controller receives IRQ 1 high, doesn't invert it, and leaves IRQ
1 as high. This results in missing the first interrupt.
* When the x86 reads from HIKDO, the EC deasserts IRQ1. This causes the
eSPI controller to set IRQ1 to low. We are now primed to catch the
next edge high interrupt. This is generally not a problem since the
linux driver will probe the 8042 with interrupts off.
On S3/S0i3 resume since the eSPI controller comes out of reset driving
the IRQ lines high, we trigger a spurious IRQ since the IO-APIC is
configured to trigger on edge high. This results in the 8042 controller
getting incorrectly marked as a wake trigger.
By configuring the IO-APIC to use low polarity interrupts, we no longer
lose the first interrupt. This also means we can use a level interrupt
to match what the EC actually asserts.
We use the `Interrupt` keyword instead of the `IRQ` keyword in the ACPI
because the linux kernel will ignore the level/polarity parameters
for the `IRQ` keyword and default to `edge/high. `Interrupt` doesn't
have this problem.
The PIC is not currently configured anywhere and it defaults to an
edge/high trigger. We could add some code to configure the PICs trigger
register, but I don't think we need the functionality right now.
For zork and guybrush, this change is a no-op. eSPI is configured in
verstage which is located in RO, and we have already locked RO for
these devices. We will need to figure out how to properly set the
`vw_irq_polarity` for these devices.
BUG=b:218874489, b:160595155, b:184752352, b:157984427, b:238818104
TEST=On zork, guybrush and skyrim
$ suspend_stress_test --post_resume_command 'cat /sys/devices/platform/i8042/serio0/wakeup/wakeup35/active_count'
Verify keyboard works as expected and no interrupt storms are observed.
On morphius I verified keyboard and mouse work on windows as well.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I4608a7684e34ebb389e0e55ceba7e7441939afe7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Change-Id: Ia5def4cf86b47ac96ba5fc6ec86a139d5ad2765e
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Pujjo support WWAN device, enable USB3.0 port 3 for WWAN device
BUG=b:241322361
TEST=Build and boot on pujjo
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Change-Id: Iafe2ea18663794138e0a27879fc108d23eb81456
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
This script creates a patch to remove all of the coreboot code that a
platform doesn't use. This is useful for auditing the codebase for an
individual platform or releasing a platform's code.
Unlike the script that Sage used that did something similar, this keeps
the entire Kconfig tree (Though in a single file), all makefiles that
are required to build, and the standard build tools can still be used.
This will allow for much easier re-integration back into the coreboot
codebase if code is released after running this.
This is just the initial version and more features needed to be added to
make it fully functional.
- It should be able to build multiple configurations to retain the code
for all of those configurations.
- Flag to remove submodules files as well
- Additional variable flags to replace hardcoded values.
- The list of makefiles that need to be kept is pretty long, and could
be updated so that they aren't needed by the top level makefiles.
- Add flag to show changed files
- Show number of files before and after script is run
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Iec69db2ad1358846d649db627b6d60ac8c2204e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59169
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This update follows suggestions from Martin Roth about the contents of
the comment.
Change-Id: Ic296bcd6a0fb250426f5d75aac69a3fa0f2aaf32
Signed-off-by: Kevin Chowski <chowski@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
On boards which use both PSP recovery A/B layout as well as VBOOT A/B
layout, ISH_B directory entry is pointing directly to PSP Level2
directory. This is not correct and either ISH_B should be marked as not
present or it should point to the ISH_A directory itself which in turn
point to PSP L2 directory. Fix it by choosing the latter option.
BUG=None
TEST=Build and boot to OS in Skyrim with PSP verstage.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I0a7a56e98de3f85669ff8ec2fcd1687aa33576a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66445
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
BUG=b:238262674
TEST=Build and check ufs.c file gets compiled for Nissa boards
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: Idc5ad922b97bd1e65e5023f9126c43e42cfc38a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66064
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change the SPL file from the 'cezanne' placeholder to a mendocino
filename. Also, move the default location to blobs/mainboard since
it's not board-agnostic.
BUG=b:241543152
BUILD=Enable feature and build amd/chausie
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I47647c5d926484e25e3f893e72c671554e277a56
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Change the name of the whitelist file from the 'cezanne' placeholder
to a mendocino path/to/file. Also, as whitelist files won't be pushed
into a public repo, modify the path to point to site-local.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I49bbf1335606567735e36ed9bda1314bfc6247d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66464
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Modify sabrina's fw.cfg to point to the proper directory and use the
standard names, as released by AMD.
The name 'sabrina' was an alias used for the Mendocino product. The
public-facing builds have been using Cezanne blobs, renamed as Sabrina
or SBR, but can now take advantage of the appropriate blobs.
BUG=b:239072117
TEST=Build amd/chausie
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Id646844e41980802be1e39dce96e5adaace4311d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This picks up the following changes
83c44ad mendocino: Add additional SPI configs
5141d91 mendocino: Add all blobs from PI 1.0.0.1
3b29a7d cezanne: Upgrade microcode patch to 00A50F00h
BUG=239072117
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I1060dc7bec8f436dccf270bc3abde75cb09bb591
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66462
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Move GPIO init for SSD_AUX_RESET_L to ensure that eMMC devices
will be initialized in time for the nominal boot flow.
BUG=b:237701972
TEST=Boots to OS
BRANCH=none
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I610966fd9d31581f15d8bcd51f8a116c27fd6311
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66461
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This gets the display working.
BUG=b:240884260
BRANCH=firmware-brya-14505.B
TEST=display works in both depthcharge and linux
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I03edac865d68ef48e86d47a04f27ed84894f2f7f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66395
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Set the watchdog timeout to 0 in ite_kill_watchdog, as in some ITE
models it is set to non-zero by default, activating the watchdog despite
us setting the control register to 0.
Based on:
- "ITE IT8786E-I Preliminary Specification V0.4.1 (For D Version)"
- Linux it87_wdt driver
Change-Id: I1e78e2acc96e9dd0f283c5c674d3277d26cdee26
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Make the default Microchip EC firmware path/to/file values overridable
by adding prompts to the strings.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I300f78a11960dbe193165fcb379b7190e3de4545
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Looking into pciexp_get_ext_cap_offset() it seems a little hackish
and prone to endless loops. Either it should limit the loop or bail
out when pci_read_config32() returns 0xffffffff, meaning "Unsupported
Requests".
This commit fixes an endless loop when the queried PCIe device is
downstream of a legacy PCI bus which doesn't support extended config
space, thus pci_read_config32() will return 0xffffffff, for example,
the combination below with CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS
enabled.
TEST=Build and boot to OS in ASUS P8C WS with the following
peripherals and CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS enabled:
00:1c.4 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series
Chipset Family PCI Express Root Port 5 [8086:1e18] (rev c4)
00:1c.4/00.0 SATA controller [0106]: Marvell Technology Group Ltd.
88SE9170 PCIe 2.0 x1 2-port SATA 6 Gb/s Controller [1b4b:9170]
(rev 13)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev a4)
00:1e.0/00.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8111 PCI
Express-to-PCI Bridge [10b5:8111] (rev 21)
00:1e.0/03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc.
VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044]
(rev c0)
00:1e.0/00.0/00.0 Network controller [0280]: Qualcomm Atheros AR93xx
Wireless Network Adapter [168c:0030] (rev 01)
with 00:1c.4/00.0 being successfully tuned with pciexp_tune_dev(), and
00: 1e.0/00.0/00.0 not tuned as expected.
Change-Id: Ibb92548c47288b40e851fcc0a8a37937e8bdbf3c
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66439
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Recent changes to both coreboot and edk2 means that UefiPayloadPkg
seems to work on all hardware. It has been tested on:
* Intel Core 2nd, 3rd, 4th, 5th, 6th, 8th, 8th, 9th, 10th,
11th and 12th generation processors
* Intel Small Core BYT, BSW, APL, GLK and GLK-R processors
* AMD Stoney Ridge and Picasso
This includes the problematic Lenovo X230s. The most likely fixes are:
* Configuring the PCI Base and Length in edk2
* Fixes to the HostBridgeLib in edk2
* Adjustment to the SD/eMMC initialisation timeout
This means we can now remove the already deprecated option for
CorebootPayloadPkg and the legacy 8254 timer build option.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ice7b7576eb3d32ea46e5138266b7df3fbcdcf7ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65721
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
The software used to read the document listing the VR settings turns
out to not be perfectly compatible. Indeed, it displays a value of 55A
for RPL-P 282 15W GT ICC MAX while the correct value actually is 40A.
After a thorough review using the software used to create the
document, it is the only value presenting a discrepancy.
BRANCH=firmware-brya-14505.B
BUG=b:239797178
TEST=build and boot
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: Iee293c87a66f0cd32714766e3ad81eee1a411723
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66057
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.corp-partner.google.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Boot issue while using FW slot A has been root-caused to the usage of
same TLB to map HW Crypto engines and SPI flash. With upcoming PSP
release, this TLB usage conflict has been resolved. Hence enable CCP
DMA.
BUG=b:240175446
TEST=Build and boot to OS in Skyrim with PSP verstage using CCP DMA.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I2b12adb7e94e489bf07963a6f9a829cf4b36ad5c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Currently bootblock does not initialize eSPI if it is already done in
PSP verstage. But some other component is clobbering the eSPI
configuration causing timeouts in EC communication after the boot flow
hits x86. To workaround this issue, re-initialize eSPI in bootblock.
BUG=b:217414563
TEST=Build and boot to OS in Skyrim with PSP verstage.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I41c0b2816a106a6a547f3cb372693e1bb7f23734
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66443
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This adds a default early GPIO table in the case of us not being
able to identify a valid board ID.
Primarily, this is useful in the case of EC issues to ensure
that debug interfaces (e.g. UART) are always up and available.
BUG=b:238165977
TEST=Boots and no errors on simics
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I135dc6c29bc23195afe5c78eb79992691652d9e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66394
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Some PCI capabilities should only be enabled if it is available not
only on a device, but also all bridge upstream of it. Checking only
the device and the bridge just above it may not be enough.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I1237d3b4b86dd0ae5eb586e3c3c407362e6ca291
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66383
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
'parent_cap' should be found from 'parent' instead of 'dev'.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I99dab83d90287ca924d30dc4aeac0ff96e877e5c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66385
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Update generated FSP headers for Alder Lake N from v3222.03 to v3267.01.
Changes include:
- Add UPD Lp5BankMode
- Update UPD Offset in FspmUpd.h
BUG=b:240373012
BRANCH=None
TEST=Build using "emerge-nissa intel-adlnfsp"and boot Nissa.
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Change-Id: I7b921e2aa467593a1c764fc554e2e83e8bb522e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66222
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Add active policy
2. Set critical policy trigger point to 105C
3. Correct TSR location
BUG=b:240634844
TEST=emerge-draco coreboot
values provided and verified by thermal team
Change-Id: I0d91bad03cbdeea5c84b533580ac98072ce0110b
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
PERST# is supposed to be de-asserted in GC6 exit, but the original
patch used the CTXS Method, which drives a GPIO low, instead of
STXS, because PERST# is active-low. This patch fixes that.
BUG=b:214581763
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ib0adb8efe5e2cc733ae2228614c58c124ba3f11b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66402
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
The lid sensor is on a daughterboard which can cause unintended
shutdowns when not connected. Disable lid sensor based shutdown behavior
in depthcharge until we have a better solution.
BUG=b:240005819
BRANCH=firmware-brya-14505.B
TEST=booted ghost, no longer shuts down due to missing lid sensor
Change-Id: I69f70255dee1b69e05b112c0174f5f52d1368837
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66295
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
