summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-02-01cbmem: use aligned_memcpy for reading cbmem address informationAaron Durbin
The coreboot table entry containing the memory entries can have fields unnaturally aligned in memory. Therefore one needs to perform an aligned_memcpy() so that it doesn't cause faults on certain architectures that assume naturally aligned accesses. BUG=chromium:925961 Change-Id: I28365b204962ac89d65d046076d862b6f9374c06 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/31181 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Manoj Gupta <manojgupta@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-02-01soc/intel/icelake: Make correct C-state entries for S0ix and non-S0ixSubrata Banik
TEST=Dump SSDT entries to verify _CST between S0ix enable and disable. >> iasl -d SSDT # to generate SSDT.dsl Change-Id: I82d8bf9d143263a80a544f6e11186a3bc9c41052 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/31153 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-01-31soc/intel/cannonlake: Make correct C-state entries for S0ix and non-S0ixRonak Kanabar
TEST=Dump SSDT entries to verify _CST between S0ix enable and disable. Change-Id: I25e8f8c13bb91c2645e8e9fdfdf9ba4d7022f1b1 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/31154 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-31mb/google/sarien: Turn on ASPM L1.2 for Card ReaderLijian Zhao
Enable ASPM L1.2 support for embedded realtek card reader, after change the power consumption for SD controller from 5mW to less than 2mW. BUG=N/A TEST=Build and boot up on Arcada platform, check the PCI configuration on pcie root port offset 0x208 is 0x0f, and offset 0x168 on card reader is also 0x0f. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I08d85ee332ceee8ed85cd816bc3e6c895528fdb0 Reviewed-on: https://review.coreboot.org/c/31145 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Roy Mingi Park <roy.mingi.park@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-31mb/google/octopus: Add Bluetooth USB ACPI configurationKarthikeyan Ramasubramanian
Enable USB ACPI driver for octopus boards and add bluetooth USB ACPI configuration in devicetree. This change enables exporting the bluetooth reset GPIO to the kernel for use in an rf-kill operation. BUG=b:123296264 BRANCH=octopus TEST=Boots to ChromeOS Change-Id: Ie40f1ad70f21a6fd398ce23d060e0c588ba6ce41 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/31130 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-01-31soc/intel/apollolake: Fix XHCI device name in ACPIKarthikeyan Ramasubramanian
XHCI is currently named as XHC1. This leads to namespace lookup error in the kernel when children USB ACPI devices are added under the scope of XHCI device. BUG=b:123296264 BRANCH=octopus TEST=Boot to ChromeOS; Ensure that the below error is resolved in the kernel dmesg [ 0.001000] ACPI Error: [\_SB_.PCI0.XHCI.RHUB.HS03] Namespace lookup failure, AE_NOT_FOUND (20170728/dswload-210) Change-Id: Ia4921547fee6fb51333319b9e881501a7e75ebce Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/31147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-01-31mb/emulation/qemu-i440fx: prepare fw_cfg for romstage usageThomas Heijligen
Add separate functions for selecting the port and reading the port. Romstage can now read incremental from the data port. Change-Id: I0ffde3bc2a4415a8af99af2275d16f6609099e37 Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.com> Reviewed-on: https://review.coreboot.org/c/30846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-01-31mb/emulation/qemu-i440fx: change file handlingThomas Heijligen
Reduce the number of fw_find_file calls by returning the file structure at fw_cfg_check_file. The file structure can then be used to allocate memory and access the file content directly without recurrence searching. Remove now unnecessary function fw_cfg_load_file. Fixed breaking function calls and add include guard at fw_cfg_if.h. Change-Id: I48cc943aaa999e4323e9d7e5dd666c5316533dcc Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.com> Reviewed-on: https://review.coreboot.org/c/30845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-01-31google/kukui: Set GPIO_RESET to output modeTristan Shieh
In payloads, we didn't set GPIO modes. We have to set up GPIO mode in coreboot for payloads. BUG=b:80501386 BRANCH=none TEST=HW reboot works in depthcharge Change-Id: Ibd2c6c071871edc59497fbb245cdbec6a814f621 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/31148 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-31lib/hardwaremain: Fix more ACPI/IOAPIC typosSubrata Banik
CB:31139 fixs few ACPI type error. Here is few more typo mistake. Change-Id: Ieecf0ba8fe09ed5003d5ae766079b8f83cc891b9 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/31152 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-30Documentation: Add some description of our communal placesPatrick Georgi
Change-Id: Iede98359c22aefbfd5725a5e7cd661ef18d7284e Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/31146 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-30soc/intel/apollolake: Sync fsp upd structure updateJohn Zhao
FSP 2.0.9 provides UPD interface to adjust integrated filter value, usb3 LDO and pmic vdd2 voltage. Change coreboot upd structure to sync with fsp 2.0.9 release. BUG=b:123398358 CQ-DEPEND=CL:*817128 TEST=Verified yorp boots to kernel. Change-Id: I3d17dfbe58bdc5222378459723da8e9ac0573510 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/31131 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-30Documentation: Add coding styleArthur Heymans
This is the old wiki page https://www.coreboot.org/Coding_Style coverted from mediawiki to markdown. Change-Id: Id56a8b7500121c4d9c18bc0b6bbc2c05402268dc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-30mainboard/intel/cannonlake_rvp: Enable SaGv configRonak Kanabar
This patch enables SaGv on Intel CNL-Y and CNL-U RVP board Change-Id: I8a4b8a2a365caed304935bf0d66db9a92d10c23f Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/31132 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-30string: move strdup() & strconcat() to lib/string.cThomas Heijligen
Move functions not available in PRE_RAM into seperate file. Makes it easier to share code between rom and ramstage. Change-Id: I0b9833fbf6742d110ee4bfc00cd650f219aebb2c Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.com> Reviewed-on: https://review.coreboot.org/c/31141 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-30selfload: check target memory type in selfload_checkTing Shen
Currently, selflock_check() verifies that the binary is loaded in an usable RAM area. Extend its functionality so we can also check that BL31 is loaded in a manually reserved area, and fail early if the range is not protected. Change-Id: Iecdeedd9e8da67f73ac47d2a82e85b306469a626 Signed-off-by: Ting Shen <phoenixshen@google.com> Reviewed-on: https://review.coreboot.org/c/31122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-30mainboard/{google,intel}: Remove SaGv hard codingRonak Kanabar
Remove hard coding for SaGv config in devicetree.cb and apply macro for SaGv config for CNL variants boards Change-Id: If007589d5c1368602928b1550ec8788e65f70c05 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/31120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-01-30mb/google/sarien/variants/arcada: Adjust TP/TS/H1 I2C CLK to meet specCasper Chang
After adjustment on Arcada EVT TouchScreen: 390 KHz TouchPad: 389 KHz H1: 389 KHz BUG=b:120584026, b:120584561 BRANCH=master TEST=emerge-sarien coreboot chromeos-bootimage measure by scope Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: Ia6eb332e7a664b211a5025ad07e0d01bf7f8d5bb Reviewed-on: https://review.coreboot.org/c/31124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-30ec/google/chromeec: Add boardid.c to verstageYou-Cheng Syu
Modifiy Makefile so that we can get board ID in verstage. BRANCH=none BUG=b:117916698 TEST=manually Change-Id: Idcdb6e07f565c937185cab811abac0ce47e5e3a7 Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/31006 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-01-30soc/amd/stoneyridge: Access SMBUS through MMIORichard Spiegel
Currently SMBUS registers are accessed through IO, but with stoneyridge they can be accessed through MMIO. This reduces the time of execution by a tiny amount (MMIO write is faster than IO write, though MMIO read is about as fast as IO read) as most of the time consumed is actually transaction time. Convert code to MMIO access. BUG=b:117754784 TEST=Used IO to write and MMIO to read, to confirm a one to one relationship between IO and MMIO. Then build and boot grunt. Change-Id: Ibe1471d1d578611e7d666f70bc97de4c3b74d7f8 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/29258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-01-30siemens/mc_apl2: Change SERIRQ modeMario Scheithauer
Because of Intel's faulty LPC clock, the SERIRQ mode must be corrected. By removing this entry from devicetree, the default value (quiet mode) is used. The problem is described in Intel document 334820-007 under point APL47. Change-Id: I7a45e0e5fcde17a20abd19a33282b8a9215b1480 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/31138 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-30siemens/mc_apl2: Correct whitespace of devicetreeMario Scheithauer
Change-Id: Ie0e11b1ce6c6acb1b74ce1196304f7e6ac4664d9 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/31137 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-01-30siemens/mc_apl2: Activate TPM supportMario Scheithauer
The TPM chip is connected to the SPI interface of APL. The proper chip select pin needs to be used in order to access the TPM in the memory mapped space. This needed chip select is internally (inside APL) routable to GPIO 106. Therefore the change of GPIO 106 mode is needed to make the TPM work on SPI bus. TEST=Build coreboot for mc_apl2 board and check the TPM console output. In addition the TPM was correctly verified by our Linux driver. Change-Id: I2b0d5a6f2c230187857c2428a70de61f21da6724 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/31125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-30mb/google/octopus/casta: Correct unused GPIO pad configurationSeunghwan Kim
Real unused GPIO pad is GPIO_123, but GPIO_122 is configured as unused pad. This patch corrects the configuration. BUG=NONE BRANCH=octopus TEST=emerge-octopus coreboot Change-Id: I4473bd66a4162f5aee3b998aacba906824728fc8 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/31135 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-01-30mb/google/hatch: Enable AP Wake from ECShelley Chen
Initialize EC_PCH_WAKE_ODL GPIO to make sure that ec events will wake the AP from suspend. Also create a task to initialize the hostevent wake mask properly. BUG=b:123325238,b:123325720 BRANCH=None TEST=from AP console: powerd_dbus_suspend from EC console: hostevent (make sure wake mask set) from EC console: gpioset PCH_WAKE_L 0 Make sure device wakes up Also, checked to make sure keyboard press wakes up device from S3. Change-Id: I53d5291a6b9ab9a21e89ccd21f172180ce473bd5 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/31100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-30sb/intel/common/firmware: Don't call GbE binary `firmware`Nico Huber
Unless things changed considerably, this file doesn't contain any firmware. It is merely replacing a configuration EEPROM for the MAC address etc. So don't call it firmware. Change-Id: Ife6190639e7f05da2cb6eddeb1b0db0e8ffc8e6e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/31108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-01-30lib/hardwaremain: Fix typo ACPISubrata Banik
Change-Id: I51493203b82868d221806c2e22b0c4b62e9fac97 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/31139 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-01-29util/docker: Update container for doc.coreboot.orgPatrick Georgi
Now running 1.8.3, with a fix to the theme so search still works, and a recommonmark version that properly rewrites links to .md files. Change-Id: Ice25554c77a398a71782c8d1cb9e205debd80d67 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/31129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-01-29mb/google/octopus/var/phaser: Hook up Raydium touchscreenHao He
List Raydium touchscreen in the devicetree so that the correct ACPI device are created. BUG=b:121105424 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage reflash the coreboot to DUT, make sure the Raydium touchscreen can work. Change-Id: I9ffb2a858f31a8b003086806de07f4079870cddf Signed-off-by: Hao He <hao.he@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/31116 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-29google/kukui: Move some initialization from bootblock to verstageYou-Cheng Syu
MT8183 only allows booting from eMMC, so we have to do eMMC emulation from an external source, for example EC, which makes the size of bootblock very important. This CL moves some initialization steps from bootblock to verstage. This will save us about 2700 bytes (before compression) / 1024 bytes (after LZ4 compression) in bootblock. In case of CONFIG_VBOOT is disabled, these initialization steps will be done in romstage. BRANCH=none BUG=b:120588396 TEST=manually boot into kernel Change-Id: I9968d88c54283ef334d1ab975086d4adb3363bd6 Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/30331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-29soc/intel/apollolake: Add GLK usb2eye configuration overrideSeunghwan Kim
Now we have usb2eye configuration register in FSPUPD, so we need to add an interface to override usb2eye setting. BRANCH=octopus BUG=NONE TEST=Verified usb2eye custom setting works Change-Id: I5c500964658072eaaf59364242aa928df25d99d1 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/31060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-01-29google/kukui: Implement HW reset functionTristan Shieh
Asserting GPIO PERIPHERAL_EN8 will send a signal to EC to trigger a HW reset for SoC and H1. BUG=b:80501386 BRANCH=none TEST=emerge-kukui coreboot; manually verified the do_board_reset() on Kukui P1 Change-Id: I9afad84af2031a766bc08fc76c8b5f55588c453a Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/31118 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-29mediatek: Separate WDT reset function from WDT driverTristan Shieh
Separate WDT reset function from WDT driver, then we can use the common WDT driver and have a board-specific reset function on different boards. In Kukui, we plan to use GPIO HW reset, instead of WDT reset. Add config "MISSING_BOARD_RESET" in Kukui to pass the build for now. BUG=b:80501386 BRANCH=none TEST=emerge-elm coreboot; emerge-kukui coreboot; Change-Id: Ica07fe3a027cd7e9eb6d10202c3ef3ed7bea00c2 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/31121 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-29cpu/intel/microcode: Enable verbose outputPhilipp Deppenwiese
* Check if microcode is really updated. * Enable more verbose output. Change-Id: I534aa790c8d37b5f1603e1715635446835513a65 Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/c/29864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2019-01-29util/ifdtools: Consider EC region accessLijian Zhao
Version 2 IFD will have flmstr5 as EC region access control, consider it during descriptor lock/unlock process. BUG=N/A TEST=Build coreboot with CONFIG_LOCK_MANAGEMENT_ENGINE set, and check flmstr5 value by hexdump the SPI image at offset FMBA+0x90. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I970064dcf6114a15f054ab7c44349841deb99dc8 Reviewed-on: https://review.coreboot.org/c/31111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-01-29util/ifdtool: Add lock support for CNL and ICLLijian Zhao
Cannonlake and Icelake have same read/write region permission settings with skylake and kabylake, so add it here as well. BUG=b:123199222 TEST=Turn on CONFIG_LOCK_MANAGEMENT_ENGINE and build image, check the setting matches 0x0D for read and 0x04 for write. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I71d8b815c7dff7dcbcff2bf77c85ebf80b8df6d2 Reviewed-on: https://review.coreboot.org/c/31104 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-01-29mb/lenovo/z61t/Kconfig: Select I945_LVDSPeter Lemenkov
This board has almost the same schematics as [xt]60 so this should work. See also commit 7971582e with Change-Id Iff6dac5a5f61af49456bc6312e7a376def02ab00. Change-Id: I8dc9b122eb64b5c1dcd0dbc99ac41aa0f8dd9766 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/31115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-29mb/intel/icelake_rvp/../icl_y: Enable SaGvSubrata Banik
This patch enables SaGv on Intel ICL-Y RVP board. TEST=Able to build and boot to Chrome OS. Change-Id: Ic3ed94d47ddc7fd70bf3de1db15fe574029df856 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/31119 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-29soc/intel/icelake: Remove unnecessary USB charging ASL entriesSubrata Banik
This patch removes stale ASL entries added in past due to chromeos requirement. BUG=115755982 TEST=Build and boot ICL platform without any problem. Change-Id: I18b57822ce3198fb96aae977f0b552ff2d4a14ee Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/31117 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-28Documentation: Fix up list of releasesPatrick Georgi
4.9 was still marked as "upcoming" and 4.10 was missing altogether, leading to a sphinx warning. Change-Id: I008d546715b7841eb9f325a6f698380dd4c1a7c2 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/31126 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-28intel/apollolake: Add IPU to disable_dev functionWerner Zeh
The SoC has an Image Processing Unit which is located on PCI 00:03.0. There is a corresponding parameter for FSP which handles enabling/disabling of this functionality (IpuEn). Add this device to the disable_dev() function of the chip so that if this device is disabled in devicetree the matching FSP parameter will be disabled as well. As this parameter is only valid for Apollo Lake, use the config switch CONFIG_SOC_INTEL_GLK to disable this code if compiled not for Apollo Lake. As this issue is regarding a missing structure member, this check needs to be done on preprocessor level and not at runtime. Test=Verified this function on mc_apl2. Change-Id: I75444bf483de32ba641f76ca50e9744fdce2e726 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/30992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-28intel/apollolake: Add fixed resources for VTd to system resourcesWerner Zeh
If the VTd feature is enabled, there will be up to two fixed resources which are set up by the FSP. Add these resources to the list of system resources so that the PCI enumerator will know them. Change-Id: If96fc1c93746e3c7f510e5b3095ea3090e1b8807 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/30991 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-28soc/apollolake: Generate DMAR tableWerner Zeh
Generate DMAR table if VTd feature is enabled. Test=Booted into Linux on mc_apl2 and verified the DMAR table contents. In addition turned off Vtd and verified that no DMAR table is generated at all. Change-Id: Ie3683a2f3578c141c691b2268e32f27ba2e772fa Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/30990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-28intelblocks/systemagent: Add ACPI table generation hookWerner Zeh
In preparation of generating DMAR tables, provide the hook in SoC scope for the systemagent to write ACPI tables. The complete functionality is SoC-specific. Therefore the entry hook is defined as a weak function which can be overridden by SoC code. If the SoC does not have support for generating DMAR tables this hook will do no harm. Change-Id: I1333ae2b79f1a855e6f3bb39bf534da170ddc9e1 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/30989 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-28src: Don't use a #defines like Kconfig symbolsElyes HAOUAS
This is spotted using ./util/lint/kconfig_lint To work around the issue, rename the prefix from `CONFIG_` to `CONF_`. Change-Id: Ia31aed366bf768ab167ed5f8595bee8234aac46b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/31049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-28soc/intel/skylake: select FSP_M_XIP if MAINBOARD_USES_FSP2_0Matt DeVillier
Select FSP_M_XIP if MAINBOARD_USES_FSP2_0, since all SkyKabylake boards require FSP-M XIP when FSP 2.0 is used, and since not having it selected results in a non-booting image. Also, put select FSP_T_XIP if FSP_CAR in proper alphabetical order. Change-Id: I6d3986eda18297b12490cefb236f5de5faca6550 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/31110 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-28vboot: Makefile: Also apply CPPFLAGS include path fixups to ccoptsJulius Werner
In some cases (e.g. Arm architecture variants), include paths are stuck into <stage>-generic-ccopts rather than CPPFLAGS_<stage> (in fact, the whole redundancy between these two is kinda stupid and we should probably eliminate the latter, but I don't want to get into that right now). This patch makes sure those paths are also correctly translated when invoking $(MAKE) for vboot. Change-Id: I37f09b88e555567590664e0e6fac23c34fd887df Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/31084 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-28mb/asus/h61m-cs: Add ASUS H61M-CSdevmaster64
Working: - USB (Partially. Check "Not working") - PCIe - PCIe graphics - All SATA ports - Native memory init - On-board audio (back and front) - S3 (Sleep and wake) Not working: - Fan control - USB (If the keyboard has a USB Hub or if the keyboard is connected through 2 or more hubs then it doesn't initialize in time. A simple reboot allows the keyboard to be used in SeaBIOS and the bootloader) Untested: - PS/2 - On board graphics Change-Id: I4ed2077248a8d7123c728c790d9b81fe37956ed2 Signed-off-by: Abhinav Hardikar <realdevmaster64@gmail.com> Reviewed-on: https://review.coreboot.org/c/30767 Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-28mb/google/octopus: Fix termination for unused dual voltage pinsShamile Khan
These pins should not have pull downs configured in standby state as that can cause contention on the termination circuitry and lead to incorrect behavior as per Doc# 572688 Gemini Lake Processor GPIOTermination Configuration. BUG=b:79982669 TEST=Checked that code compiles with changes. Change-Id: If3cadc000ec6fc56019ee3f57e556dc819d5e0a5 Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/c/30823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-28mainboard/google/octopus/variants/casta: Decrease touchpad I2C CLK frequencySeunghwan Kim
ELAN touchpad supports up to 400KHz, so we need to limit its CLK frequency to 400HKz. BUG=b:123376618 BRANCH=octopus TEST=built and verified touchpad I2C clk frequency gets be lower than 400KHz Change-Id: If7a43fe20c7e5abdf23c8c36e34c072c371563bf Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/31085 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-28mb/lenovo/thinkcentre_a58: Extend mb nameArthur Heymans
While branded as thinkcentre a58 this board can also be found as "L-IG41M". Change-Id: I06ed424138c46c6b2f29f15c7ea5c3648b26a8d3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/31109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-28mb/google/sarien: Using HID over I2C to enable Melf TouchScreenChris Zhou
Current Melfas touchscreen driver cannot unregister ifself when connecting without Melfas touchscreen or connecting with other devices. And Melfas touchscreen FW can use I2C and HID over I2C driver, so switch to using HID over I2C driver. BUG=b:122710830 BRANCH=master TEST=Verify touchscreen on sarien works with this change. Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Change-Id: If04a2904a0f72a6c8363ab2c9865926c71cb5186 Reviewed-on: https://review.coreboot.org/c/31062 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-28amd/stoneyridge: Disable GPIO MASK STATUSRaul E Rangel
MASK_STATUS disables interrupt status generation for the entire GPIO controller when any debounce register is configured. This causes problems when the kernel is loading drivers because we could lose interrupts for previously loaded devices. sb_program_gpios is also not setup to wait when configuring PAD_DEBOUNCE, so there is a potential that we could lose the interrupt status enable bit for other registers. By disabling MASK_STATUS we avoid that problem. BUG=b:113880780 BRANCH=none TEST=Ran a reboot stress test that concluded that we are no longer losing TPM interrupts while booting. Change-Id: Ife1db3b1449f205092509595cbc3eca511bff57a Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/31082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2019-01-28soc/intel/denverton_ns: Add ACPI T-States and P-StatesJulien Viard de Galbert
Also make soc_get_tss_table public and weak instead of static in intelblock so it can be overridden in denverton. Change-Id: Id9c7da474a81417a5cebd875023f7cd3d5a77796 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/c/25430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Vanny E <vanessa.f.eusebio@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: David Guckian Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
2019-01-28soc/intel/{apl,skl}: Drop redundant `select RTC`Nico Huber
RTC is now implicitly selected through SOC_INTEL_COMMON_BLOCK_RTC and SOC_INTEL_COMMON_PCH_BASE. Change-Id: I1885c419cfe318b75f3bda6220d4a6f6a8e26575 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/31113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-01-28soc/intel/common/rtc: Enable RTC in common code RTCLijian Zhao
Intel RTC common code driver need to turn on RTC itself.After the change, cannonlake and icelake platform will have RTC enabled. BUG=b:123372643 TEST=build and boot up on sarien platform, check .config to see CONFIG_RTC is set. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I0c8c5cf9e6f7f338b1f2f784c04254649d257536 Reviewed-on: https://review.coreboot.org/c/31112 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-28src/soc/intel/cnl/chip.h: Fix preprocessor conditionAngel Pons
Commit dc666f5 (soc/intel/cannonlake: Change in SaGv options) added a conditional preprocessor directive, but its condition was incorrect because SOC_INTEL_CANNONLAKE is selected for CNL, CFL and WHL. Thus, an explicit check for !SOC_INTEL_COFFEELAKE is required. While we are at it, clean up the comment above a bit. BUG=b:123184474 Change-Id: I8a6959bb615fb5668cbfe54339747d135bd5a005 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/31095 Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-27src/cpu/intel: Set get_ia32_fsb function commonElyes HAOUAS
Add get_ia32_fsb returns FSB values in MHz of intel's CPUs. Also add get_ia32_fsb_x3 function. It returns round up 3 * get_ia32_fsb. Change-Id: I232bf88de7ebba6ac5865db046ce79e9b2f3ed28 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30103 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-27src: Fix the warning "type 'hex' are always defined"Elyes HAOUAS
This is spotted using "./util/lint/kconfig_lint" While at it, do the check in C and not the preprocessor. Change-Id: Icfda267936a23d9d14832116d67571f42f685906 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/31050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-27nb/intel/i945: Fix typo on DMIBAR32(0x334)Elyes HAOUAS
Change-Id: Ib894c24bc787c6c211da26dca78bcd330ded6681 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/31063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-27nb/intel/i945: Remove initialization already done at bootblockElyes HAOUAS
Upper 128bytes of CMOS and RCBA are already enabled at bootblock. Tested on 945g-MA. Resuming from suspend is working fine Change-Id: I3f34380b0e700cf60688ad58465f9cb0aeda0928 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/31107 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-26mb/qemu-riscv: update to match current qemu versionPhilipp Hug
Boots again to payload not found on qemu. Change-Id: Ie107eb882cbaac5a5a06c1ff990e7b9364377640 Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/c/30554 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-26Revert "util/bincfg: code cleanup: convert sym_table to a local variable"Angel Pons
This reverts commit 48c24ce5eefe64b1aa82237f0a4be2772c686ef6. Reason for revert: Commit broke bincfg, and sym_table as a global variable is less bad than passing it around in function calls. Change-Id: Ib8d64a1dc201d17a4e278ab0114958b6807a45ac Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/31105 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-26crossgcc: Update CMake to version 3.13.3Elyes HAOUAS
Change-Id: If3bd670e2273715b6996e2ca78a0b9c412bfd220 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-26util/crossgcc: Update to binutils 2.31.1 and gcc 8.2Patrick Georgi
Change-Id: Icf7c6bdd4021bf84cc295c819f93838248e0f4c7 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/31089 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-01-25superio/common/conf_mode: use pnp_write_config instead of outb callsFelix Held
Change-Id: Ibab8e798bd6bee14ef4141373e48100504d6cb46 Signed-off-by: Felix Held <felix-github@felixheld.de> Reviewed-on: https://review.coreboot.org/c/31061 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-25mb/lenovo/x131e: remove PMH7James Ye
This board does not have PMH7. Change-Id: I382958f012e5f4445efc76c7f36bbdf460c29be4 Signed-off-by: James Ye <jye836@gmail.com> Reviewed-on: https://review.coreboot.org/c/31065 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-25util/superiotool: detect Fintek F81866, F8196*Kyle Stevenson
F81866 detection tested with the iBASE SI-613: superiotool r4.9-420-g034e5e6 Found Fintek F81866 (vid=0x3419, id=0x1010) at 0x4e F8196* detection is based on chip IDs provided by iBASE, but untested. Change-Id: I7210e1523a188a8593cd03547bb0c95cd3e7aa39 Signed-off-by: Kyle Stevenson <kstevenson@comqi.com> Reviewed-on: https://review.coreboot.org/c/31052 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-25soc/intel/denverton_ns: Enable ACPI using intelblockJulien Viard de Galbert
- Port the existing denverton tables to intelblock - Add C-States table for denverton Note: Removed code is functionally identical to corresponding common code. Tested-on: scaleway/tagada Change-Id: Iee061a258a7b1cbf0a69bcfbf36ec2c623e84399 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/c/25428 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-25mb/google/octopus: Override emmc DLL values for AmptonKane Chen
New emmc DLL values for Ampton BUG=b:122307153 TEST=Boot to OS on 5 systems Change-Id: Iadd58d254f4bb384f483c2c3e5615f7569d5211c Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/31048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-01-25mb/google/sarien: Force power on after cr50 updateDuncan Laurie
By default this board is configured to not power up after an EC reset. However in the case of a cr50 firmware update that will reset the EC it will end up powered off. In order to have it stay powered up configure the board to power up. This will get reset to the configured default when it boots again. BUG=b:121380403 TEST=update cr50 firmware and reboot to ensure system boots and does not end up powered off. Change-Id: I85beae24b1bc56bb0813f1fd1305218f04b0c1c8 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31058 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-25vendorcode/google/chromeos: Add mainboard hook before cr50 updateDuncan Laurie
In order to allow the mainboard to configure the system before a cr50 initiated update reset add a weak function that the mainboard can override if necessary. This will allow a board that would otherwise be configured to stay off after an EC reset to instead power up after the reset and not end up in a shut down state after a cr50 update. BUG=b:121380403 TEST=update cr50 firmware on sarien and reboot Change-Id: I11f9e8c9bfe810f69b4eaa2c633252c25004cbd0 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31057 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-25soc/intel/cannonlake: Export function to set After G3 stateDuncan Laurie
Export the SOC level function to set the After G3 state so it can be changed by the mainboard. The setting will be restored by a normal boot but in some circumstances coreboot wants to ensure that it will be powered up again after a reset. BUG=b:121380403 TEST=update cr50 firmware on sarien and reboot and ensure the host does not power off after the cr50 initiated reset. Change-Id: I6cd572ac91229584b9907f87bb4b340963203c32 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31056 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-25soc/intel/cannonlake: Disable CpuRatio and SaGv in recoveryDuncan Laurie
Disabling CpuRatio UPD for FSP will ensure it does not force a hard reset to set the CPU Flex Ratio at boot. This is important in a recovery mode boot where the SOC will lose power and need to set the flex ratio again. Disabling SaGv makes recovery mode training faster and mirrors the setting that was done on Skylake. BUG=b:123305400 TEST=reliably enter recovery mode on sarien Change-Id: Ie9664493a980af9acce82faff81f4c4b1355be73 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-01-25mb/google/sarien: Increse BIOS region size to 28MBLijian Zhao
Increase BIOS region(SI_BIOS) from 16MB to 28MB to make more spaces for upcoming payloads. BUG=b:121169122 TEST=Build and boot up fine into OS on sarien and arcada platform. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I4b03e20a485cb819b468c00e68f1539e92731237 Reviewed-on: https://review.coreboot.org/c/31054 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-25soc/intel/apollolake: Override GLK usb clock gating registerJohn Zhao
It was observed system suspend/resume failure while running RunInDozingStress. Apply correct GLK usb clock gating register value to mitigate the failure. BRANCH=octopus BUG=b:120526309 TEST=Verified GLK clock gating register value after booting to kernel. Change-Id: I50fb16f5ab0e28e79f71c7f0f8e75ac8791c0747 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-25mb/google/kahlee/variants/aleena: Add support Synaptics touch padLucas Chen
Add support Synaptics touch pad for Aleena/Kasumi. BUG=b:122549449 BRANCH=master TEST= Check if synaptics touch pad working in ChromeOS. Change-Id: Icab1b312f1943b27037ef458044ce9e7172919ee Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/31064 Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-25sb/intel/common: Show "Add gigabit ethernet firmware" only for boards that ↵Jan Tatje
need it Hide "Add gigabit ethernet firmware" option for boards that do not use GbE firmware in GbE section. The option is now hidden by default and can be reenabled on a per-board basis by selecting MAINBOARD_USES_IFD_GBE_REGION in the mainboards Kconfig. The following boards seem to use this: mb/roda/rv11 mb/ocp/wedge100s mb/ocp/monolake mb/lenovo/x230 mb/lenovo/x220 mb/lenovo/x201 mb/lenovo/x200 mb/lenovo/t530 mb/lenovo/t520 mb/lenovo/t430s mb/lenovo/t430 mb/lenovo/t420s mb/lenovo/t420 mb/lenovo/t400 mb/kontron/ktqm77 mb/intel/saddlebrook mb/intel/kblrvp mb/intel/dg43gt mb/intel/dcp847ske mb/intel/coffeelake_rvp mb/intel/camelbackmountain_fsp mb/hp/revolve_810_g1 mb/hp/folio_9470m mb/hp/compaq_8200_elite_sff mb/hp/8770w mb/hp/8470p mb/hp/8460p mb/hp/2760p mb/hp/2570p mb/google/sarien mb/facebook/watson mb/compulab/intense_pc mb/asus/maximus_iv_gene-z The boards were identified by looking at devicetree.cb, but this list is possibly still incomplete. Change-Id: Ibfb07902ad93fe5ff2bd4f869abcf6579f7b5a79 Signed-off-by: Jan Tatje <jan@jnt.io> Reviewed-on: https://review.coreboot.org/c/30790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-25mb/{kontron,supermicro}: Use pcidev_on_root()Elyes HAOUAS
Change-Id: I61b3e5c92830f02d61a108dadde25ff261099e57 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/31051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2019-01-25nb/intel/sandybridge/acpi: Add RMRR entry for iGPUNico Huber
The iGPU always needs access to its stolen memory. For proper IOMMU support, we have to make the OS aware of that. Directly below TOLUD lies the data stolen memory (BDSM) followed by the GTT stolen memory (BGSM), the iGPU needs access to both. Change-Id: I391d0a5f1ea14bc90fbacabce41dddfa12b5bb0d Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-01-24src/mb/asrock/../g41m-s3: Remove spurious devicesAngel Pons
This fixes errors regarding "PCI: Leftover static devices" Change-Id: Ie45fe6934df4a9dad4c8f6b1af665034853c4c5a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/31020 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-24ec/google/wilco: Turn on wake up from lidLijian Zhao
Send required EC command to enable ACPI S3 wake up from lid switch. BUG=b:120748824 TEST=Put Sarien system into S3 and then wake up from lid switch successful. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I13f3469847b0886147b8b624311a1ece796f847b Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-24mb/*/*/devicetree.cb: Move the ioapic device under the LPC bridgeArthur Heymans
This fixes spurious lines "child IOAPIC: 02 not a PCI device" and IOAPIC as leftover device. Change-Id: Id8010c84c45f0859508e7564c0eaa501904b7043 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/31041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-24Revert "soc/intel/denverton_ns: Rewrite pmutil using pmclib"Patrick Georgi
This reverts commit ab1227226ebd78b40783cb200e60711b900352f0. There were significant changes around soc_reset_tco_status() that this code needs to be adapted to. Change-Id: I563c9ddb3c7931c2b02f5c97a3be5e44fa873889 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/31071 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-24mb/google/sarien/variants: Set tcc offset valueSumeet Pawnikar
Set tcc offset value to 5 degree celsius for Sarien system. BRANCH=None BUG=b:122636962 TEST=Built and tested on Sarien system Change-Id: I06fbf6a0810028458bdd28d0d8a4e3b645f279ca Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/31037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2019-01-24riscv: ARCH_RISCV_RV{32,64} selects ARCH_RISCVRonald G. Minnich
ARCH_RISCV_RV{32,64} will now select ARCH_RISCV. Change-Id: Ia7a1a8f0bfab20e91b8429dd6dd3e9a4180a0a5b Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/c/31042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx>
2019-01-24soc/intel/denverton_ns: Configure MCAJulien Viard de Galbert
Change-Id: I101eb4f008a13af92bac5ed738a8d1f1f8c65eba Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/c/25433 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24soc/intel/denverton_ns: Use cpulib in cpu.cJulien Viard de Galbert
Also remove duplicate code Change-Id: I45da6363a35cf6f5855906bb97ed023681d36df7 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/c/25432 Reviewed-by: Vanny E <vanessa.f.eusebio@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Guckian Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24soc/intel/denverton_ns: Enable Fast StringsJulien Viard de Galbert
Change-Id: I7cee3c40299abf14a24128b1ac14f1823f87a0e1 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/c/25431 Reviewed-by: Vanny E <vanessa.f.eusebio@intel.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: David Guckian Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24soc/intel/denverton_ns: Rewrite pmutil using pmclibJulien Viard de Galbert
Change-Id: If31e7102bf1b47c7ae94b86d981b762eda0a19e5 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/c/25427 Reviewed-by: David Guckian Reviewed-by: King Sumo <kingsumos@gmail.com> Reviewed-by: Vanny E <vanessa.f.eusebio@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24soc/intel/common/block/acpi: fix P-States extra entryJulien Viard de Galbert
The ratio_max step is appearing twice when (ratio_max - ratio_min) is evenly divisible by the ratio step. This is because in this case there are no rounding down of ratio_max in the for loop. Thanks Jay Talbott for the step calculation algorithm. Change-Id: I91090b4d87eb82b57055c24271d679d1cbb3b7a7 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/c/25429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-24ec/kontron: Add support for Kontron kempldNico Huber
A programmable logic device used by Kontron as EC on their COM express modules. The name `kempld` is taken from Linux kernel sources, as is the I2C driver. The meaning of the acronym is unclear, probably: Kontron Embedded Module PLD. Change-Id: If9a0826c4a8f5c8cd573610c2d10561334258b36 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-01-24mb/google/sarien: Fix recovery mode detectionDuncan Laurie
In order to support the physical recovery GPIO on sarien it needs to enable the option VBOOT_PHYSICAL_REC_SWITCH and set the GPIO number in the coreboot table appropriately so that depthcharge can correctly determine the GPIO number. The same is done for the write protect GPIO in this table. Additionally since we are reading a recovery request from H1 it needs to cache the result since H1 will only return true on the first request. All subsequent queries to H1 will not indicate recovery. Add a CAR global here to keep track of the state and only read it from H1 the first time. BUG=b:121380403 TEST=test_that DUT firmware_DevMode Change-Id: Ia816a2e285d3c2c3769b25fc5d20147abbc71421 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31043 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24mb/google/octopus/bobba: Add support to handle PEN_EJECT eventKarthikeyan Ramasubramanian
Enable gpio_keys driver for bobba and add required configuration in the device tree to handle the pen eject event. BRANCH=octopus BUG=b:117953118 TEST=Ensure that the system boots to ChromeOS. Ensure that the stylus tools open on pen eject. Ensure that the system wakes on Pen Eject. Ensure that the system enters S0ix and S3 states after the pen is ejected. Ensure that the system enters S0ix and S3 states when the pen remains inserted in its holder. Ensured that the system does not wake when the pen is inserted. Ensure that the suspend_stress_test runs successfully for 25 iterations with the pen placed in its holder. Change-Id: I768b89d2b45f4dcab6d235b11ce00544a827f22d Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/30108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-24drivers/generic/gpio_keys: Add trigger for wakeup event actionKarthikeyan Ramasubramanian
Currently without any trigger the wakeup event is generated on both the rising and falling edges of the GPIO input. Add support to specify the trigger explicitly so that the configuration can be passed to the kernel. BRANCH=octopus BUG=b:117953118 TEST=Ensure that the system boots to ChromeOS. Ensure that the stylus tools open on pen eject. Ensure that the system wakes on Pen Eject. Ensure that the system enters S0ix and S3 states after the pen is ejected. Ensure that the system enters S0ix and S3 states when the pen remains inserted in its holder. Ensured that the system does not wake when the pen is inserted. Ensure that the suspend_stress_test runs successfully for 25 iterations with the pen placed in its holder and ejected from its holder. Change-Id: Ifb08ba01106031aa2655c1ae2faab284926f1ceb Signed-off-by: Karthikeyan Ramasubramanian <kramasub@chromium.org> Reviewed-on: https://review.coreboot.org/c/30451 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-24soc/intel/gpio: Enable configuring GPIO debounce durationKarthikeyan Ramasubramanian
Add new helper macros to enable configuring debounce duration for a GPIO input. Also ensure that the debounce configuration is not masked out. BRANCH=octopus BUG=b:117953118 TEST=Ensure that the system boots to ChromeOS. Ensure that the debounce duration is configured as expected. Change-Id: I4e3cd7744867bcfbaed7d3d96fed4e561afb2cec Signed-off-by: Karthikeyan Ramasubramanian <kramasub@chromium.org> Reviewed-on: https://review.coreboot.org/c/30450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-24soc/intel/common/gpio_defs: Enable configuring GPIO_DW2 pad registerKarthikeyan Ramasubramanian
Currently all the helpers support configuring GPIO_DW0/1 registers. In some architectures there is an additional configuration GPIO_DW2 register that can be used to configure debounce duration etc. Add a helper macro to enable configuring GPIO_DW2 pad register. BRANCH=octopus BUG=b:117953118 TEST=Ensure that the system boots to ChromeOS. Ensure that the current configuration is not disturbed by turning on the GPIO_DEBUG option and verifying the debug output before and after the change. Change-Id: I3e5d259d007fdc83940a43cc4cd4a2b8a547d334 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@chromium.org> Reviewed-on: https://review.coreboot.org/c/30449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-24cbmem_top: Fix comment and remove upper limitPatrick Rudolph
There's no such limit on 64 Bit coreboot builds. * Fix comment in cbmem.h * Remove 4 GiB limit on Cavium SoCs Tested on opencellular/elgon. Still boots Linux as payload. Change-Id: I8c9c6a5ff81bee48311e8bf8e383d1a032ea3a6d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-01-24soc/cavium/cn81xx: Replace uses of dev_find_slot()Kyösti Mälkki
Change-Id: I9f176caff3b6423121676eb895f5f68a5b926de4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30517 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-24mediatek/mt8183: Move some initialization into mt8183_early_initYou-Cheng Syu
MT8183 only allows booting from eMMC, so we have to do eMMC emulation from an external source, for example EC, which makes the size of bootblock very important. This CL adds a new function mt8183_early_init, which includes all initializations that should be done in early stages. All mainboards using MT8183 should manually call it in either bootblock or verstage. BRANCH=none BUG=b:120588396 TEST=manually boot into kernel Change-Id: I35d7ab875395da913b967ae1f7b72359be3e744a Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/31024 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 18:22:52 +0000