summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-12-09mb/facebook/fbg1701: Remove ONBOARD_SAMSUNG_MEMFrans Hendriks
CONFIG_ONBOARD_SAMSUMG_MEM was used to force Samsung memory. CPLD returns different values for every board revision. Use this value to determine the memory type. BUG = N/A TEST = Boot Facebook FBG1701 Rev 1.0 - 1.4 Change-Id: I21b5ddc430410a1e8b3e9012d0c07d278880ff47 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-09soc/intel/alderlake: Fix value of SA_DEVFN_CPU_PCIE1_0Tim Wawrzynczak
The macro was defined using PCH_DEV_SLOT_CPU_1, which doesn't exist, so replace it with the correct value of SA_DEV_SLOT_CPU_1. Change-Id: If6d294d681907c51ac5678c9251364d4d6df4329 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-12-09mb/google/brya: keep the same TPM I2C for 4ES variantsYH Lin
Since 4ES variants were forked from their own original variants, use the same TPM I2C as well. BRANCH=none BUG=b:201767461 TEST=emerge-brya coreboot and check the artifacts Signed-off-by: YH Lin <yueherngl@google.com> Change-Id: Iddd6d8c22a181aba596b836f20392f76539b8549 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-09cpu/amd/agesa/Kconfig: select NO_SMM for Family 14hMichał Kopeć
Move the SMM Kconfig options to the specific agesa cpu families. Select NO_SMM for family14 since since no Fam14h platform uses SMM. Leave SMM_ASEG enabled for family15tn and family16kb for now. TEST=Boot Debian 11 on PC Engines apu1 Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Change-Id: I09bbe036a88dada847219606ec79c68e7ca8e5cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/59809 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-12-09soc/amd/stoneyridge: use common fch_spi_early_initFelix Held
All SPI interface setup related functionality that Stoneyridge implemented in its southbridge code is already present in the common AMD SoC code, so use that code instead. The common fch_spi_early_init function requires the SPI controller's base address to be set, so call lpc_set_spibase(SPI_BASE_ADDRESS) right before it. fch_spi_early_init then calls lpc_enable_spi_rom and lpc_enable_spi_prefetch which can be removed from the board code now. Next it calls fch_spi_configure_4dw_burst which does the same as the now removed sb_disable_4dw_burst function when SOC_AMD_COMMON_BLOCK_SPI_4DW_BURST is set to n which is the default. This option can also only be set to y for SoCs that aren't Stoneyridge. Finally fch_spi_early_init calls fch_spi_config_modes which configures the SPI mode and speed settings according to the Kconfig settings and the settings in the amdfw part. On Kahlee this was done by calls to sb_read_mode and sb_set_spi100 before. The previous patch added the remaining Kconfig settings, so the resulting register values don't change in the non-EM100 case. In the EM100 case the TPM speed is changed from 64 to 16 MHz. TEST=Both the non-EM100 mode with a real SPI flash and the EM100 mode with a first-generation EM100 results in Google/Barla reaching the payload and the show_spi_speeds_and_modes call in bootblock prints the expected settings: relevant bootblock console output in non-EM100 case: SPI normal read speed: 33.33 MHz SPI fast read speed: 66.66 Mhz SPI alt read speed: 66.66 Mhz SPI TPM read speed: 66.66 Mhz SPI100: Enabled SPI Read Mode: Dual IO (1-2-2) relevant bootblock console output in EM100 case: SPI normal read speed: 16.66 MHz SPI fast read speed: 16.66 MHz SPI alt read speed: 16.66 MHz SPI TPM read speed: 16.66 MHz SPI100: Enabled SPI Read Mode: Normal Read (up to 33M) Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8f37a3b040808d6a5a8e07d39b6d4a1e1981355c Reviewed-on: https://review.coreboot.org/c/coreboot/+/59968 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-09mb/google/kahlee/Kconfig: add remaining SPI speed settingsFelix Held
Before this patch only the SPI settings that will also end up in the amdfw part of the firmware were specified in the board's Kconfig. This patch adds the settings from Kahlee's bootblock.c to the Kconfig file which will be needed in subsequent patches. Also add a comment about the EM100 case. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie42feb9b41f435c329bf1c78471e65ef5a3fb783 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-09soc/amd/common/block/psp: add psp_efs.c to build for both PSP GEN1&2Felix Held
The PSP EFS code to get the SPI mode and speed from the amdfw part of the firmware image also works for Stoneyridge which is the one SoC that selects SOC_AMD_COMMON_BLOCK_PSP_GEN1. Also amdblocks/psp_efs.h already handles the SOC_AMD_STONEYRIDGE case. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibddd3f9237e561d9f0f6b4ad70f59cce1f956986 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-09SeaBIOS: Update stable release to 1.15.0Martin Roth
SeaBIOS 1.15.0 was released on December 2nd. This updates the stable version from 1.14.0 to 1.15.0 Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ibc526fbddf8a13e7b00e963f9c2e73a9863c9daa Reviewed-on: https://review.coreboot.org/c/coreboot/+/59957 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-12-09mb/google/corsola: Pass reset gpio parameter to BL31Rex-BC Chen
To support gpio reset SoC, we need to pass the reset gpio parameter to BL31. TEST=build pass BUG=b:202871018 Cq-Depend: chromium:3188686 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I48d8d004ea92e950d0040a11133c57c121b86af3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-09soc/mediatek/mt8186: Enable ARM Trusted Firmware integrationRex-BC Chen
Enable configuration to build with MT8186 arm-trusted-firmware drivers. TEST=build pass BUG=b:202871018 Cq-Depend: chromium:3189573 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ib23b112a0bf3d056b932a87b86aaff79508ef50c Reviewed-on: https://review.coreboot.org/c/coreboot/+/59823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-09mb/google/corsola: correct NOR flash configuration in GPIO setRex-BC Chen
The reference design has changed to use GPIO SET1 for NOR flash. There are no devices already built using SET0 so we can safely change the implementation without conditional configs. Reference document: kingler_mt8186_mt6366_lpddr4x_e.pdf, page 11. crab_proto 0_2021112.pdf, page 11. BUG=b:202871018 TEST=flash verify pass on kingler on bootblock stage Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I031686ccddcf789f3fa966d113ee48949e454b8f Reviewed-on: https://review.coreboot.org/c/coreboot/+/59945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-12-09mb/google/corsola: get SKU IDRex-BC Chen
Retrieve the SKU ID for Corsola via CBI interface. If that failed (or no data found), fallback to ADC channels for SKU ID. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I2888190d498df28b5ae13cf92cc41d088e8f8ee7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-09Update arm-trusted-firmware submodule to upstream masterYu-Ping Wu
Updating from commit id 586aafa3a: 2021-07-19 05:36:18 +0200 - (Merge "errata: workaround for Neoverse V1 errata 1791573" into integration) to commit id 73193689c: 2021-12-06 16:47:33 +0100 - (Merge changes I7c9f8490,Ia92c6d19 into integration) This brings in 684 new commits. Change-Id: I4173f3cb646839ad12c4e43e8c50b0be53364f04 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59955 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2021-12-08soc/intel/common/pch: Fix return value documentation for CHIPSET_LOCKDOWNJingle Hsu
Fixed according to the declaration in soc/intel/common/block/include/intelblocks/cfg.h. Change-Id: I50dbc00806fefda8f4dac8bfa21dc714a9504566 Signed-off-by: Jingle Hsu <jingle_hsu@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-12-08mb/google/dedede/var/magolor: Add fw_config probe for multi codec andTyler Wang
amplifier Compatible headphone codec "ALC5682I-VS" and speaker amplifier "ALC1015Q-VB" BUG=b:208912135 TEST=ALC5682I-VD and ALC1015Q-VB can work normally Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: Id661280061ede3fbb63c962dee8fb18a2053ad66 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-12-08util/testing: combine code coverage dataPaul Fagerburg
As part of the `what-jenkins-does` target, combine the code coverage data from all unit tests (currently just coreboot and libpayload). BUG=b:203800199 TEST=`make what-jenkins-does && ls -l coreboot-builds/coverage.info` Signed-off-by: Paul Fagerburg <pfagerburg@google.com> Change-Id: Id99615ca8279f80a402d5371221b8fd36fb91d55 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <patrick@coreboot.org>
2021-12-08mb/google/guybrush: Combine mem_parts_used.txtRob Barnes
Combine guybrush mem_parts_used.txt across guybrush variants. Guybrush reference memory parts is used as the base, then Nipperkin memory parts were appended, followed by DeWatt memory parts. Duplicates were removed. The memory id mapping was not affected on guybrush reference and Nipperkin. DeWatt memory id mapping was affected, DeWatt boards will need to be adjusted. This works around a limitation in APCB, which currently only supports one set of memory SPDs. BUG=b:209486790, b:204151079 BRANCH=None TEST=Boot guybrush and nipperkin Change-Id: Ie17025e092f2b9397afea33fce285e80ef5dc995 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-12-08soc/amd/{cezanne,picasso,stoney,common}: Don't clear PM1 on resumeRaul E Rangel
According to https://uefi.org/specs/ACPI/6.4/04_ACPI_Hardware_Specification/ACPI_Hardware_Specification.html#pm1-event-grouping > For ACPI/legacy systems, when transitioning from the legacy to the G0 > working state this register is cleared by platform firmware prior to > setting the SCI_EN bit (and thus passing control to OSPM). For ACPI > only platforms (where SCI_EN is always set), when transitioning from > either the mechanical off (G3) or soft-off state to the G0 working > state this register is cleared prior to entering the G0 working state. This means we don't want to clear the PM1 register on resume. By clearing it the linux kernel can't correctly increment the wake count when the power button is pressed. The AMD platforms implement the _SWS ACPI methods, but the linux kernel doesn't actually use these methods. BUG=b:172021431 TEST=suspend zork and push power button and verify power button wake_count increments. Verified other wake sources still work. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Iaa886540d90f4751d14837c1485ef50ceca48561 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59929 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-08soc/amd/stoneyridge/southbridge: drop ENV_X86 checkFelix Held
Stoneyridge selects ARCH_X86 unconditionally and all coreboot code will run on the x86 cores. On Picasso and later, the Chromebooks run verstage on the PSP which is an ARM V7 core which needs some special handling cases in the code, but this doesn't apply to Stoneyridge. TEST=Timeless build results in an identical image for Google/Careena. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I013efd13b56c0191af034a8c4b58e9b26a31c6e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-08soc/amd/{cezanne,picasso,stoney}: Clear PM/GPE when enabling ACPIRaul E Rangel
According to https://uefi.org/specs/ACPI/6.4/16_Waking_and_Sleeping/sleeping-states.html?highlight=power%20states# > For ACPI/legacy systems, when transitioning from the legacy to the G0 > working state this register is cleared by platform firmware prior to > setting the SCI_EN bit. This change makes sure we clear the PM/GPE blocks are cleared before enabling the SCI_EN bit. BUG=b:172021431 TEST=Boot guybrush and morphius to OS and verify suspend resume still works. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Icc6f542185dc520f8d181423961b74481c0b5506 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-12-08mb/google/brya/var/primus: Fix PLD group orderScott Chao
In ec/google/chromeec: Add PLD to EC conn in ACPI table(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table. It causes the DUT to not boot into the OS. So fix the USB3/USB2 Type-C Port C2 PLD group order from 3 to 2 to solve this issue. BUG=b:209568644 BRANCH=none TEST=build coreboot and system boot into OS. Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Change-Id: If5ce6ca061d9d56ba0bbb1f157b2ba278d3fa9c3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59953 Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-08libpayload/Makefile: Improve object files list creationJakub Czapiga
This patch ports some parts of main coreboot Makefile to the libpayload Makefile in order to improve object files creation. Moreover, the coreboot source files are now accessible an will be correctly compiled under libpayload build directory. Change-Id: If1280c0a3f7e99aad2ecf8a0379a98af31ccefc3 Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <patrick@coreboot.org>
2021-12-08libpayload: Add include/commonlib/bsd to installed headersJakub Czapiga
Copy header files from the main commonlib/bsd to libpayload output installation directory. Change-Id: Idc7175240f3077ec98280331f9a952310aae4341 Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59916 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <patrick@coreboot.org>
2021-12-08sb/amd/pi/hudson/early_init: fix setting SPI_USE_SPI100 in SPI100_ENABLEFelix Held
Use a read modify write sequence when setting the SPI_USE_SPI100 bit in the SPI100_ENABLE register. This avoids clearing other bits in the register which might cause instabilities. Haven't checked the reference code, but the register descriptions suggested that the register in Mullins behaves similar to the one in Stoneyridge. Right now this code is unused, but it's probably still a good idea to fix it. TEST=Booting Debian 11 with kernel 5.10 on apu2 still works when adding a call to hudson_set_spi100 with this patch applied. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifbd960a9509542b28f03326a3066995540260bef Tested-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59934 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2021-12-08soc/amd/stoneyridge/southbridge: fix setting SPI_USE_SPI100Felix Held
Use a read modify write sequence when setting the SPI_USE_SPI100 bit in the SPI100_ENABLE register. This avoids clearing other bits in the register which might cause instabilities of the SPI interface. The reference code for Stoneyrige also only sets the SPI_USE_SPI100 bit and doesn't zero out the other bits. TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4d32fc2084bb34ea57924bae68511c6836587790 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-08soc/amd/common/block/spi: fix setting SPI_USE_SPI100 in SPI100_ENABLEFelix Held
Use a read modify write sequence when setting the SPI_USE_SPI100 bit in the SPI100_ENABLE register. This avoids clearing other bits in the register which might cause instabilities of the SPI interface. The reference code for both Picasso and Cezanne also only sets the SPI_USE_SPI100 bit and doesn't zero out the other bits. TEST=Verified that Mandolin still boots. It didn't show any signs of possibly related instabilities before though, so this test doesn't say much. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I71c2ec1729d5cb4cdff6444b637af29caaa6f1c0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59932 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-08soc/amd/common/block/include/spi: update fch_spi_early_init descriptionFelix Held
commit 90ac882a32075b44435aa19ea664b89b79cac76e (soc/amd/common/block/ spi: introduce SOC_AMD_COMMON_BLOCK_SPI_4DW_BURST) introduced a Kconfig option to enable/disable the 4DW burst support in the SPI flash data prefetcher, but missed to update the documentation above the fch_spi_early_init prototype, so update the outdated documentation now. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I07c4b0b02251da63d34a172e2636894e99845d6b Reviewed-on: https://review.coreboot.org/c/coreboot/+/59931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-12-08mb/google/corsola: Configure TPMRex-BC Chen
Initialize SPI bus 2 for TPM control. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I8ede68d6eb594890195e8464151c1c0f88aeee43 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59943 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-08mb/google/corsola: implement get_ec_is_trustedRex-BC Chen
Set VB2_CONTEXT_EC_TRUSTED in verstage_main. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: If2837f5db52f91f5418d222d4dcd1af2aebcc105 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59942 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-08mb/google/corsola: Enable Chrome ECRex-BC Chen
Initialize SPI bus 1 for Chrome EC control. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I7d032d595f7ca1dbed3de4dfe308ff4be64333cd Reviewed-on: https://review.coreboot.org/c/coreboot/+/59941 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-08soc/mediatek/mt8186: Correct SPI_HZ for PLLRex-BC Chen
The SPI speed is 218.4MHz, so correct the value of SPI_HZ. BUG=b:202871018 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I6e8ba10a851e1507405cdd41939a176462734487 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59939 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-08soc/mediatek/mt8186: revise SPI NOR GPIO selectionRex-BC Chen
The setting of SPI NOR GPIOs should be: CS: pull up. CLK/IO0/IO1: pull down. BUG=b:202871018 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ideacb797a1dc9999ab6ba00cf33adbbbc24213dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/59940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-08cpu/amd/pi/Kconfig: select NO_SMMMichał Kopeć
Disable SMM_ASEG and select NO_SMM since the platforms do not use SMM. TEST=Boot Debian 11 on PC Engines apu3 Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Change-Id: I47237421c3dd5bd043447831263d72c9956cdaf4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59810 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-12-08lib: Fix log2_ceil() for 0xffffffffYu-Ping Wu
Current log2_ceil(x) is defined as log2(x * 2 - 1). When x is larger than (1 << 31), (x * 2 - 1) won't fit in u32, leading to incorrect result. Therefore, correct it as (log2(x - 1) + 1). Also add unit tests for inline functions in lib.h. BUG=none TEST=make tests/lib/lib-test BRANCH=none Change-Id: If868f793b909a6ad7fc48a7affac15e2c714fa2e Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-12-08mb/google/zork,soc/amd/psp_verstage: Add verstage_mb_{tpm/espi}_initRaul E Rangel
These functions can't be weak, because they actually need to configure the GPIOs for eSPI and the TPM. With this change zork boots again. I also noticed that zork doesn't use the early table in bootblock. This means that zork will only boot if psp_verstage is enabled. BUG=b:209465425 TEST=boot zork to ramstage Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I384fd578efe7da0a3d74829cccf38c3ed524f130 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-12-08soc/amd: use KiB and MiB definitionsFelix Held
Use KiB and MiB instead of multiplying/dividing with/by the numeric value when doing region size calculations. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I56c380190b11aa3214cce31b82974327e3d15000 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59936 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-12-07tests: Disable -Wmain-return-type for clangJulius Werner
Unit tests fail on clang 13.0 because Cmocka's main() function is declared with return type int, but through some of our chain-include games it sometimes gets coreboot's main_decl.h which declares the function as void. Compilers have traditionally always been very laissez-faire about the signature of the main function, but it seems that clang has been getting more strict by default recently. Explicitly disable the related warning to shut it up. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I867c9dac659be86e7b7cf4cc41d6fa105aa9ac41 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59815 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2021-12-07tests: Disable -Wsource-mgr for clangJulius Werner
Unit tests fail on clang 13.0 with a cryptic error: _timestamp_size changed binding to STB_WEAK [-Werror,-Wsource-mgr] Probably something related to the weird things we do to mock memlayout areas. Too lazy to track it down. Let's just disable this (clang-specific, not properly documented) warning flag. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ie49c9eef3c74592c068c899c6717621dbcb9f609 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2021-12-07cbfstool: Fix offset calculation for aligned filesJulius Werner
The placement calculation logic in cbfs_add_component() has become quite a mess, and this patch can only fix that to a limited degree. The interaction between all the different pathways of how the `offset` variable can be set and at what point exactly the final placement offset is decided can get quite convoluted. In particular, one existing problem is that the offset for a file added with the --align flag is decided before the convert() function is called, which may change the form (and thereby the size) of the file again after its location was found -- resulting in a location that ends up being too small, or being unable to find a location for a file that should fit. This used to be okay under the assumption that forced alignment should really only be necessary for use cases like XIP where the file is directly "used" straight from its location on flash in some way, and those cases can never be compressed -- however, recent AMD platforms have started using the --align flag to meet the requirements of their SPI DMA controller and broken this assumption. This patch fixes that particular problem and hopefully eliminates a bit of the convolution by moving the offset decision point in the --align case after the convert() step. This is safe when the steps in-between (add_topswap_bootblock() and convert() itself) do not rely on the location having already been decided by --align before that point. For the topswap case this is easy, because in practice we always call it with --base-address (and as far as I can tell that's the only way it was ever meant to work?) -- so codify that assumption in the function. For convert() this mostly means that the implementations that do touch the offset variable (mkstage and FSP) need to ensure they take care of the alignment themselves. The FSP case is particularly complex so I tried to rewrite the code in a slightly more straight-forward way and clearly document the supported cases, which should hopefully make it easier to see that the offset variable is handled correctly in all of them. For mkstage the best solution seems to be to only have it touch the offset variable in the XIP case (where we know compression must be disabled, so we can rely on it not changing the file size later), and have the extra space for the stage header directly taken care of by do_cbfs_locate() so that can happen after convert(). NOTE: This is changing the behavior of `cbfstool add -t fsp` when neither --base-address nor --xip are passed (e.g. FSP-S). Previously, cbfstool would implicitly force an alignment of 4K. As far as I can tell from the comments, this is unnecessary because this binary is loaded into RAM and CBFS placement does not matter, so I assume this is an oversight caused by accidentally reusing code that was only meant for the XIP case. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ia49a585988f7a74944a6630b77b3ebd79b3a9897 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <patrick@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-07northbridge/amd/pi/00730F01/northbridge.c: remove unneeded global variablesMichał Kopeć
Remove global variables `sblink` and `node_nums` and add function `get_node_nums()` which reads from PCI config once and returns a static variable. TEST=Boot Debian 11 on PC Engines apu3 Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Change-Id: I20a47f967093ef91355377c164656cabadc30fe6 Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-12-07mb/google/brya: add list of gpios to lockNick Vaccaro
Add a list of gpios to lock for brya. This currently includes GPIOs connected to the FPMCU. BUG=b:201430600 TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that brya0 boots successfully to kernel. Change-Id: Idea42a58575c280be0770d38f934acdf5508c45d Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58353 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-07soc/intel/alderlake: enable gpio lockingNick Vaccaro
This change supplies a list of ADL gpios that are connected to non-host (x86) controllers and should be locked after initial configuration. Set SOC_INTEL_COMMON_BLOCK_SMM_LOCK_GPIO_PADS to enable GPIO locking. BUG=b:210430600 TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that brya0 boots successfully to kernel. Change-Id: I457bab39f945ab31a89542c6498a73af70cbf9ee Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58352 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-12-07soc/intel/common: add generic gpio lock mechanismNick Vaccaro
For added security, there are some gpios that an SoC will want to lock once initially configured, such as gpios attached to non-host (x86) controllers, so that they can't be recofigured at a later point in time by rogue code. Likewise, a mainboard may have some gpios connected to secure busses and/or devices that they want to protect from being changed post initial configuration. This change adds a generic gpio locking mechanism that allows the SoC to export a list of GPIOs to be locked down and allows the mainboard to export a list of GPIOs that it wants locked down once initialization is complete. Use the SOC_INTEL_COMMON_BLOCK_SMM_LOCK_GPIO_PADS Kconfig option to enable this feature. BUG=b:201430600 TEST='emerge-brya coreboot chromeos-bootimage', flash and verify brya0 boots successfully to kernel. Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Change-Id: I42979fb89567d8bcd9392da4fb8c4113ef427b14 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-06mb/google/brya/var/gimble: Configure Acoustic noise mitigationMark Hsieh
- Enable Acoustic noise mitigation - Set slow slew rate VCCIA and VCCGT to 16 BUG=b:206704930 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I2be3d30403284b98276c837adefd91aa62c971e4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59535 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-06util/liveiso: Update to NixOS 21.11Felix Singer
Update configs so that they work with NixOS 21.11. Drop `iasl` package since it was replaced with `acpica-tools`. Change-Id: Icb9a382b83b3b3e55126bb0bb508659d11497a05 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-12-06util/cbfstool: Ensure that htole32 et al are visible when buildingPatrick Georgi
endian.h wasn't included (although it probably came in as an indirect include) but in some header sets _XOPEN_SOURCE overrides _DEFAULT_SOURCE whereas the latter is a super set of the former: We should get the same things as with _XOPEN_SOURCE (such as memccpy for which it has been defined) but also extra features like htole32. Change-Id: Iaee7495b2ae64fdc719ae0879ea95fe7df286212 Signed-off-by: Patrick Georgi <patrick@coreboot.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-12-06soc/intel/alderlake: Add ADL-P 6+8+2 (28W) VR configCurtis Chen
We only have ADL-P 6+8+2 (45W) VR configuration now. Based on the power map, fill in correct ADL-P 6+8+2 (28W) VR configuration. BUG=b:202486131 TEST=Build and check fsp log to confirm the settings are set properly. Signed-off-by: Curtis Chen <curtis.chen@intel.com> Change-Id: Ie8dbd95b2d8e49b5898b2a97aff72e0e64868c8b Reviewed-on: https://review.coreboot.org/c/coreboot/+/59736 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-06soc/mediatek/mt8195: complete devapc settingsNina Wu
In previous patch (CB:56764), only basic settings were added. Now complete devapc settings on MT8195. 1. Update permission setting 2. Updtate master domain setting: - domain 1: PCIE0, PCIE1 - domain 2: SPM, SSPM, CPU_EB 3. Set domain remap - MMSYS (4-bit to 2-bit) - TINYSYS (4-bit to 3-bit) - TINYSYS (3-bit to 4-bit) - TINYSYS to EMI (3-bit to 4-bit) - INFRA2 (3-bit to 4-bit) 4. Set SCP domain and ADSP domain - domain 3: SCP - domain 4: ADSP BUG=b:204347737 TEST=sanity test pass Change-Id: I1846d56d2dc362de64b28e0ed9a0681f186af7ee Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59746 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-06soc/intel/alderlake: Add support for ADL-N CPU TypeUsha P
Add Alder Lake-N case for adl_cpu_type and get_supported_lpm_mask. Signed-off-by: Usha P <usha.p@intel.com> Change-Id: If2917ac356fd80f84bcaf70ed710d329e77f7a6d Reviewed-on: https://review.coreboot.org/c/coreboot/+/59836 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-12-06northbridge/amd/pi/00730F01: enable PARALLEL_MPMichał Kopeć
Disable LEGACY_SMP_INIT to enable PARALLEL_MP. Also remove a large amount of APIC code that is now unnecessary. TEST=Boot on PC Engines apu3 Boot time reduced from 1.707 seconds to 1.620 seconds average across 5 coldboots. Inspired by CB:59693 Change-Id: Ib49e7d3f5956ac7831664d50db5f233b70aa54db Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-12-06x86_64 assembly: Don't touch %gsPatrick Rudolph
With CPU_INFO_V2 enabled %gs holds the pointer to the cpu_info struct, so don't clobber it. Backup and restore %gs where possible. Fixes a crash in MPinit seen after calling FSP-S. Change-Id: If9fc999b34530de5d8b6ad27b9af25fc552e9420 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-12-06security/intel: Use defines for segment registersPatrick Rudolph
Change-Id: I6f11039bafa3800d59d61defa8824ae962224c9b Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59763 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-06cbfs: Remove deprecated APIsJulius Werner
This patch removes all remaining pieces of the old CBFS API, now that the last straggling use cases of it have been ported to the new one (meaning cbfs_map()/cbfs_load()/etc... see CB:39304 and CB:38421). Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I1cec0ca2d9d311626a087318d1d78163243bfc3c Reviewed-on: https://review.coreboot.org/c/coreboot/+/59682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-12-06tests: Fix objcopy --add-symbol arguments creationJakub Czapiga
Remove unnecessary escape bachslashes from: addr="$(echo \"$$$$sym_line\" ... The 'echo' will print output line with double quote characters, which then will be included in the values passed to --add-symbol. This can cause errors. Change-Id: I6023515191d6c236bf57870159a35d518f25e9d8 Reported-by: Yu-Ping Wu <yupingso@chromium.org> Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-12-06mb/google/brya/var/redrix: Swap TPM I2C with touchscreen I2CWisley Chen
According to the latest schematic, exchange I2C port for TPM/touchscreen. TPM: I2C3 -> I2C1 Touchscreen: I2C1 -> I2C3 BUG=b:205648040 TEST=FW_NAME=redrix emerge-brya coreboot Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I3a8339c23522019da884944246427512170510b6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-06soc/intel/common: Refactor cpu_set_p_state_to_max_non_turbo_ratioSridhar Siricilla
The patch refectors cpu_set_p_state_to_max_non_turbo_ratio(). The function is updated to use cpu_get_max_non_turbo_ratio(). TEST=Build the code for Brya Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: If73df17faaf7b870ae311460a868d52352683c0c Reviewed-on: https://review.coreboot.org/c/coreboot/+/59789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-06soc/intel/common: Add CPU related APIsSridahr Siricilla
The patch defines below APIs : cpu_is_hybrid_supported() : Check whether CPU is hybrid CPU or not. cpu_get_bus_frequency() : Get CPU's bus frequency in MHz cpu_get_max_non_turbo_ratio() : Get CPU's max non-turbo ratio cpu_get_cpu_type() : Get CPU type. The function must be called if executing CPU is hybrid. TEST=Verified the APIs on the Brya board Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I680f43952ab4abce6e342206688ad32814970a91 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-06mb/var/gimble: Set PsysPmax to 143 WChia-Ling Hou
This patch adds the setting of PsysPmax to 143 W according to gimble board design. BUG=b:206990759 TEST=emerge-brya coreboot chromeos-bootimage & ensure the value is passed to FSP by enabling FSP log & Boot into the OS Change-Id: Id6a203f05ecfcc1020a422850d35fa3fa64e01d0 Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ryan Lin <ryan.lin@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-06soc/intel: Move enum pcie_rp_type to intelblocks/pcie_rp.hTim Wawrzynczak
This enum is useful to have around for more than just the one file, so move it to a common header file, and while we're there, also add an option for UNKNOWN. TEST=boot test on brya0 Change-Id: I9ccf0ed9504dbf6c60e521a45ea4b916d3dcbeda Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-12-06acpi: Add #define for Mutex "no timeout" valueTim Wawrzynczak
Some acpigen code may use mutexes, and it is a common idiom to pass a value for the Timeout field of 0xffff, which is interpreted by OSPM to mean "no timeout". Therefore add a macro for this value. BUG=b:197983574 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I16bc9f3f04dd1e3dc0f3eca3e56377e6f48132b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-12-06mb/google/brya/var/felwinter: Correct garage wake eventEric Lai
Eject event is high. Set wake event to active high. The polarity of the SCI and the wakeup_event_action for the pen ejection feature were both backwards, and was causing the system to fail to enter sleep states because the event was always asserted. BUG=b:208937710 TEST=only release switch can wake system. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I568e9175c7a66599f7a525c32e4def7a79b55a0a Reviewed-on: https://review.coreboot.org/c/coreboot/+/59861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-06cpu/x86/mp_init.c: Fix HAVE_SMI_HANDLERArthur Heymans
Fixes commit 29c7622 ("cpu/x86/mp_init.c: Fix building with no smihandler") broke SMM init because is_smm_enable() was called before smm_enable. Rework the code a little to make it clear what codepaths are used with CONFIG_HAVE_SMI_HANDLER. TESTED: now prodrive/hermes boots again. Change-Id: If4ce0dca2f29754d131dacf2da63e946be9a7b6d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59912 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-06Documentation: Add template for deprecation noticesPatrick Georgi
Change-Id: Ia2cc4f799804c7d56db572823246c487cd19a726 Signed-off-by: Patrick Georgi <patrick@coreboot.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59677 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-06Documentation: Update SSH key procedurePatrick Georgi
Use ed25519 keys because recent changes to RSA keys in OpenSSH are making a mess. Also update references to the Gerrit UI to match the current version. Change-Id: Ib13836feb6968307d2c8b3022cb0c859dac89bb8 Signed-off-by: Patrick Georgi <patrick@coreboot.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-12-05mb/google/hatch: Remove stryke mainboardTim Wawrzynczak
The stryke project/mainboard never ended up being built and was cancelled early on, therefore remove it from the tree. Change-Id: I4d91fbd4ba0abe0cf599e8e75f04398ef9ff5222 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59875 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-12-03soc/intel/adl: Add override skip_cse_sub_part_update() for alderlakeKrishna Prasad Bhat
Check the Alderlake CPU ID to determine if cse sub-paritition update is required or not. BUG=b:202143532 Change-Id: Icae21dad56ed4a1edea1f641b3d5bccc3943f831 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-03soc/intel/common: Add support for CSE IOM/NPHY sub-parition updateKrishna Prasad Bhat
This patch adds the following support to coreboot 1. Kconfig to add IOM/NPHY in the COREBOOT/FW_MAIN_A/FW_MAIN_B partition of BIOS 2. Helper functions to support update. Pre-requisites to enable IOM/NPHY FW Update: 1. NPHY and IOM blobs have to be added to added COREBOOT, FW_MAIN_A and FW_MAIN_B through board configuration files. CONFIG_SOC_INTEL_CSE_IOM_CBFS_FILE: IOM blob Path SOC_INTEL_CSE_NPHY_CBFS_FILE: NPHY blob path 2. Enable CONFIG_CSE_SUB_PARTITION_UPDATE to enable CSE sub-partition NPHY/IOM update. coreboot follows below procedure to update NPHY and IOM: NPHY Update: 1. coreboot will navigate through the CSE region, identify the CSE’s NPHY FW version and BIOS NPHY version. 2. Compare both versions, if there is a difference, CSE will trigger an NPHY FW update. Otherwise, skips the NPHY FW update. IOM Update: 1. coreboot will navigate through the CSE region, identify CSE's IOM FW version and BIOS IOM version. 2. Compares both versions, if there is a difference, coreboot will trigger an IOM FW update.Otherwise, skip IOM FW update. Before coreboot triggers update of NPHY/IOM, BIOS sends SET BOOT PARTITION INFO(RO) to CSE and issues GLOBAL RESET commands if CSE boots from RW. coreboot updates CSE's NPHY and IOM sub-partition only if CSE boots from CSE RO Boot partition. Once CSE boots from RO, BIOS sends HMRFPO command to CSE, then triggers update of NPHY and IOM FW in the CSE Region(RO and RW). coreboot triggers NPHY/IOM update procedure in all ChromeOS boot modes(Normal and Recovery). BUG=b:202143532 BRANCH=None TEST=Build and verify CSE sub-partitions IOM and NPHY are getting updated with CBFS IOM and NPHY blobs. Verified TBT, type-C display, NVMe, SD card, WWAN, Wifi working after the update. Change-Id: I7c0cda51314c4f722f5432486a43e19b46f4b240 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59685 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-03soc/intel/common: Add check before sending HMRFPO_ENABLE commandSridhar Siricilla
This patch adds a check to determine if the CSE's current operation mode is ME_HFS1_COM_SECOVER_MEI_MSG or not before sending HMRFPO_ENABLE command to CSE. If CSE is already in the ME_HFS1_COM_SECOVER_MEI_MSG, coreboot skips sending HMRFPO_ENABLE command to CSE to unlock the CSE RW partition. TEST=Verify sending HMRFPO_ENABLE command on Brya system. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I387ac7c7296ab06b9bb440d5d40c3286bf879d3b Reviewed-on: https://review.coreboot.org/c/coreboot/+/59698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-03soc/intel/common: Rename compare_cse_version() function nameSridhar Siricilla
The patch renames the compare_cse_version() function to the cse_compare_sub_part_version(). It makes the function generic so that it can be used to compare version of any CSE sub-partition like IOM, NPHY etc. TEST=Verified build for Brya Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I88a44a3c0ba2ad8a589602a35ea644dab535b287 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59689 Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-03soc/intel/alderlake: Add support for ADL-N PCHUsha P
Introduce the `SOC_INTEL_ALDERLAKE_PCH_N` Kconfig option and use it to specify the correct amount of PCIe I/O. Document number 645550 indicates that Alder Lake-N has 12 PCH root ports and no CPU root ports. Document number 645548 indicates ADL-N has 5 clock sources and 5 clock request signals. Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I7ebbcdcdb1ccc34b80ec71ac3e591fe4ad6b1904 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-03cbfs | tspi: Join hash calculation for verification and measurementJulius Werner
This patch moves the CBFS file measurement when CONFIG_TPM_MEASURED_BOOT is enabled from the lookup step into the code where a file is actually loaded or mapped from flash. This has the advantage that CBFS routines which just look up a file to inspect its metadata (e.g. cbfs_get_size()) do not cause the file to be measured twice. It also removes the existing inefficiency that files are loaded twice when measurement is enabled (once to measure and then again when they are used). When CBFS verification is enabled and uses the same hash algorithm as the TPM, we are even able to only hash the file a single time and use the result for both purposes. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I70d7066c6768195077f083c7ffdfa30d9182b2b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59681 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-03mb/google/brya/var/felwinter: Add WiFi SAR table for felwinterIan Feng
Add WiFi SAR table for felwinter. BUG=b:206901900 TEST=emerge-brya chromeos-config chromeos-config-bsp-private coreboot-private-files-baseboard-brya coreboot chromeos-bootimage and checked SAR table can load by WiFi driver. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I0de710f4447302ee545a67cbd79373bdd2077637 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-12-03mb/google/brya: Update camera NVM parametersBernardo Perez Priego
Change HID name from INT3499 to PRP0001 along with size and address width. Size decreased from 10K to 2K, address width decreased from 14 to 8. BUG=b:203014972 Test= Boot board and issue commands: `cat /sys/bus/i2c/devices/i2c-PRP0001:02/eeprom > ./brya_imx208_eeprom.bin` `hexdump -C brya_imx208_eeprom.bin > brya_imx208_eeprom_dump.log` You should see the result in brya_imx208_eeprom_dump.log to be same as module nvm file by vendor provided or meet the Intel nvm calibration format. (e.g. first 4 bytes be 0x01, 0x03, 0x01, 0x00) Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: Ib2366ba4c8bb70d8cc82e64ca585b118a96260c0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-03libpayload: Add CBMEM_IMD_ENTRY support to coreboot tables parserJakub Czapiga
coreboot stores much information in the CBMEM IMD. Until now it was ignored. This patch makes use of these coreboot tables entries. It also removes get_cbmem_addr() function as it is no longer needed. Moreover, the coreboot tables entry CB_TAG_MRC_CACHE does not exist anymore, as it is not created by the code. It was replaced by CBMEM_ID_MRCDATA entry, so MRCDATA should now be accessible through sysinfo structure field. Change-Id: I5bd02a98ba2631f34014bc0f8e7ebd5a5ddd2321 Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-12-03mb/google/dedede/var/drawcia: Generate new SPD ID for new memory partsRobert Chen
Add new memory parts in memory_parts_used.txt and generate SPD id for these parts: Samsung K4U6E3S4AA-MGCL BUG=b:204014463 TEST=run part_id_gen to generate SPD id Change-Id: Icb0f211508450b16b2e5d214ae6adc9852718a59 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59642 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-12-03region: Rename rdev_readat_full to rdev_read_fullJulius Werner
The 'at' part of the name refers to starting to read from a specific offset, so it doesn't make sense for the 'full' version of the function. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I60d595f0cbd161df171eaa4a76c7a00b6377e2b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59820 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-03cpu/x86/mp_init.c: Fix building with no smihandlerArthur Heymans
The build fails because smm_stub_size() tries to find a symbol that won't be present. Change-Id: I73fee3cf26c0e37cca03299c6730f7b4f1ef6685 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-12-03mb/prodrive/hermes: Add VBT for Avalanche systemsAngel Pons
The Hermes mainboard is used in different system configurations. The current VBT for Poseidon systems is unsuitable for Avalanche systems because display ports are connected differently. Add a new field in the BMC config EEPROM layout and use it to choose the correct VBT for every system configuration. Change-Id: I2647f2ae3f496b9ad75980ba86beb7800fdb0668 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-12-03mb/prodrive/hermes: Correct memory RCOMP settingsAngel Pons
The original RCOMP resistor and target values only apply to ULT CPUs and do not make sense for the CFL-S CPUs Hermes uses. Fix the RCOMP settings and the associated comments. Tested, still boots. Change-Id: I015797c58c914c6581d472e6d70d2dd7bad2b14f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-12-03mb/prodrive/hermes: Configure ALC888 port B VrefAngel Pons
Define a new field in the board config EEPROM layout for port B Vref. Write port B Vref settings to unused non-volatile NID 0x12 instead of NID 0x18, the actual port B NID. Because per-port Vref settings don't persist after codec resets, a custom Realtek driver (ab)uses NID 0x12 to restore port B Vref after resetting the codec. Change-Id: Iaa11ba9c74f643e94046d4983fbce65dbedd1025 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-03mb/prodrive/hermes: Update r04 front audio configAngel Pons
Update the pin configs for the front panel jacks. Change-Id: I3760f0a25e964cf0eba99d180fd6f3e8488af868 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-12-03mb/prodrive/hermes: Clean up some cosmeticsAngel Pons
Use lowercase for hex numbers, sort includes alphabetically and avoid relying on indirect inclusion. Include `<intelblocks/gpio.h>` instead of `<intelblocks/gpio_defs.h>`, as the latter implcitly relies on one definition from `<soc/gpio.h>`. Also drop useless dsdt.asl and fix up the indentation of some includes. Tested with BUILD_TIMELESS=1, Prodrive Hermes remains identical. Change-Id: I3aeb9a644cf33cb4b1987174f40ef0fc7daccfa9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-12-03mb/prodrive/hermes: Get rid of variant structureAngel Pons
There's no need to use a variant structure here. Only one variant is used, and revision-specific differences are handled at run-time, and it's unlikely that another variant will ever exist. Reorganize the mainboard code to get rid of the variant structure. Change-Id: I1543f5b76975b0e7183fbb759e9bae5c34151d06 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-12-03mb/prodrive/hermes: Add board URLAngel Pons
Change-Id: I943d0e2a91778df306f323e2b889cd4e928e0c2b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-12-03mb/google/guybrush: Configure EN_SPKR GPIO in PSP verstageKarthikeyan Ramasubramanian
EN_SPKR GPIO is used as a multiplexer select signal between RAM_ID straps and Developer Mode Beep signals. During boot up it is LOW and selects RAM_ID straps. When the system enters OS, it is driven HIGH and selects DEV BEEP signals. Since in some boards, the GPIO chosen is in S5 domain it does not reset until the system enters mechanical off (G3) state. On scenarios where the power button is pressed when the system is in S5, incorrect RAM_ID strap is being read because the EN_SPKR is still selecting DEV BEEP signal. This causes boot up failures. Fix this by configuring the EN_SPKR GPIO (in S5 domain) explicitly in PSP verstage. BUG=b:204450368 TEST=Build and boot to OS in Guybrush. Perform suspend-resume cycle followed by a S5 -> S0 boot cycle for 2 iterations successfully. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I9a52a167da9c7040731da5d355ec345fd9b13762 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59813 Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-03mb/google/brya/var/brask: Enable LAN driver to program MACAlan Huang
Turn on the LAN device in devicetree and add Kconfig item RT8168_GET_MAC_FROM_VPD to support programming MAC address. BUG=b:193750191 BRANCH=None TEST=Use 'vpd -s ethernet_mac0=...' to write MAC to VPD. Use 'ifconfig' to check if the MAC written successfully. Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com> Change-Id: Ibb95b02fd6d61621ef46db4d63b48456a0a72732 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59087 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-03drivers/net/r8168: Add support for Realtek RT8125Alan Huang
The Realtek RT8168 and RT8125 have a similar programming interface, therefore add the PCI device ID for the RT8125 into driver for support. BUG=b:193750191 TEST=emerge-brask coreboot chromeos-bootimage. Test on brask whose NIC is RT8125. Check if the default MAC is written into the NIC. Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com> Change-Id: Iaa4c41f94fd6e5fd6393abbb30bfc22a149f5d71 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-03soc/intel/alderlake: Add the CnviDdrRfim configurationRonak Kanabar
FSP v2422_01 introduced new FSPM UPD CnviDdrRfim. Add CnviDdrRfim config to control the CnviDdrRfim UPD from devicetree. Setting CnviDdrRfim to 1 enable CNVi DDR RFIM BUG=b:201724512 BRANCH=None TEST=Build and boot brya with debug FSP and verify CnviDdrRfim UPD value. Change-Id: Ia06c9ed77d78821fd4724046bae2f31c9d771518 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-03mb/google/brya/var/brask: Set vGPIO reset typeKane Chen
Due to the vGPIO is not reset when we power on through S5, we would met MCA when PCIE send L1 request without following Ack BUG=b:207625007 TEST=S0->S3->S5->power key->S3->S0, see if boot up normal Change-Id: I20cdd1650d1ca774065a6c051006dfd0b7a3fd79 Signed-off-by: Curtis Chen <curtis.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59726 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-03soc/intel/alderlake: Add TDP to give correct VR configurationCurtis Chen
The VR configuration should be based on the different Soc SKU type. And we also have different SKU in the same SA PCI ID. Therefore, add TDP to recognize the correct SKU and give the correct power setting. BUG=b:202486131 TEST=Build and check fsp log to confirm the settings are set properly. Signed-off-by: Curtis Chen <curtis.chen@intel.com> Change-Id: I4d31e7afc76d9a8c772781671f92ec08f9d8713f Reviewed-on: https://review.coreboot.org/c/coreboot/+/59644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-03mb/google/dedede: Create beadrix variantTeddy Shih
Create the beadrix variant of the waddledee reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:204882915 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_BEADRIX Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com> Change-Id: Ie08cbc19967eca8ba31ea3203e71c4e1fef044d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59302 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-12-03soc/amd/cezanne: Enable secure countersKarthikeyan Ramasubramanian
Guybrush uses secure counters to protect against High Definition (HD) protected content rollback. These secure counters are hosted in TPM NVRAM. Enable secure counters so that they are defined in PSP verstage. BUG=b:205261728 TEST=Build and boot to OS in Guybrush. Ensure that the secure counters are defined successfully in TPM NVRAM. Change-Id: I6818c6f7905aa2eb815059e23c4f79437593f8ca Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-03src/security/vboot: Set up secure counter space in TPM NVRAMKarthikeyan Ramasubramanian
High Definition (HD) protected content playback requires secure counters that are updated at regular interval while the protected content is playing. To support similar use-cases, define space for secure counters in TPM NVRAM and initialize them. These counters are defined once during the factory initialization stage. Also add VBOOT_DEFINE_WIDEVINE_COUNTERS config item to enable these secure counters only on the mainboard where they are required/used. BUG=b:205261728 TEST=Build and boot to OS in guybrush. Ensure that the secure counters are defined successfully in TPM NVRAM space. tlcl_define_space: response is 0 tlcl_define_space: response is 0 tlcl_define_space: response is 0 tlcl_define_space: response is 0 On reboot if forced to redefine the space, it is identified as already defined. tlcl_define_space: response is 14c define_space():219: define_space: Secure Counter space already exists tlcl_define_space: response is 14c define_space():219: define_space: Secure Counter space already exists tlcl_define_space: response is 14c define_space():219: define_space: Secure Counter space already exists tlcl_define_space: response is 14c define_space():219: define_space: Secure Counter space already exists Change-Id: I915fbdada60e242d911b748ad5dc28028de9b657 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-12-03mb/google/brya/variants/primus: Swap TPM I2C with touchscreen I2CMalik_Hsu
In next build phase, primus will exchange i2c port for touchscreen and cr50. BUG=b:207834727 TEST=build pass Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Change-Id: Ief1b156b866a9aaa2919f0e209b6439c7019e939 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59737 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-03mb/google/brya/var/taeko: Set vGPIO reset typeKevin Chang
Due to the vGPIO is not reset when we power on through S5, we would met MCA when PCIE send L1 request without following Ack BUG=b:207070967 TEST=S0->S3->S5->power key->S3->S0, see if boot up normal Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: Ice522260f288b165ae66dddc3e1979e806b53f9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/59749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-03mb/google/brya: Create taniks variantJoey Peng
Create the taniks variant of the brya0 reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0.) BUG=b:207402720 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_TANIKS Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: I797051f93019ccf72f1007d9c0b98cfb071717b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59643 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-02mb/google/brya/var/brask: Set PL and PsysPLAlan Huang
1. Set the PL1, PL2 and PL4 according to issue b:193864533 comment#55 and Intel's doc #626774. 2. Set PsysPL2 and PsysPmax according to the conclusion in issue b:193864533 comment#23 and comment#29. BUG=b:193864533 BRANCH=none TEST=Compare the measured power from adapter with the value of 'psys' from the command 'dump_intel_rapl_consumption'. Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com> Change-Id: I9261902b8c892d0b866f326b24988039c1d30b56 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59576 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-02mb/google/brya/var/baseboard/brask: Add power limits functionsAlan Huang
Copy function variant_update_power_limits from brya to set power limits. Add function variant_update_psys_power_limits and copy the algorithm from puff. Add structure system_power_limits and psys_config to define and configure the psys power limits. BUG=b:193864533 BRANCH=none TEST=Build pass Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com> Change-Id: I183017068e9c78acb9fa7073c53593d304ba9248 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58241 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-02mb/google/brya/var/gimble: Swap TPM I2C with touchscreen I2CMark Hsieh
DVT schematic will exchange TPM_I2C3 to TPM_I2C1, that may need swap TPM I2C with touchscreen I2C to avoid TPM I2C fall on muxed ISH I2C, need change I2C map, sch amd GPIO map. b/196293623 BUG=b:207613972 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I26d059a7ea5a3fdf00de260214c00d3bba9aa7f7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59580 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-02mb/google/brya/var/felwinter: Swap TPM and touchscreen I2C busEric Lai
Follow the latest HW schematic change. BUG=b:208556921 TEST=build pass Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ic05843487ea540b8cd9a50d5f73803905fd80d49 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 05:04:02 +0000