summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-07-21t132: Correct dma_busy functionTom Warren
In case of continuous mode, use STA_ACTIVITY bit to determine if DMA operation is complete. However, in case of ONCE mode, use STA_BSY bit to determine if DMA operation on the channel is complete. This change was propogated from T210, commit ID fe48f094 BUG=None BRANCH=None TEST=Ryu/Rush build OK. Change-Id: I13073cc12ed0a6390d55b00c725d1cc7d0797e23 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: aab62d5148b57fd1e05c1e838eafe8fdee431ef8 Original-Change-Id: I7388e9fd73d591de50962aaefc5ab902f560fc6f Original-Signed-off-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/286468 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/11017 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-21t210: Add tegra_lp0_resume codeYen Lin
BUG=chrome-os-partner:40741 BRANCH=None TEST=tested on Smaug; able to suspend/resume Change-Id: I3e796bee4b1bedfd4cce0a37549108d5271658a6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 207ca26cb2c157c0dcf476c4d4973b4d4ec67cc7 Original-Change-Id: I8565d4cf1632d6d3023aa55b2bff824a092f2c3b Original-Signed-off-by: Yen Lin <yelin@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/277025 Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/11018 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2015-07-21libpayload: lz4: Add output overrun check to incompressible caseJulius Werner
The LZ4 decompressor currently doesn't check for output overruns before writing data in the case where a block had been incompressible (and included verbatim in the compression stream). This is extremely unlikely with the default 4MB blocks, but still a nice thing to fix. We'll still output as much data as we can before returning an error to support partial decompression use cases. This matches the behavior already in place for normal, LZ4-compressed blocks where the decompression function is already (supposed to be) doing complete bounds checking (although it is not guaranteed to output all valid bytes before aborting on an output overrun, and you should try to provide a few dozen bytes of extra buffer space beyond the parts you're interested in on partial decompression). BRANCH=None BUG=chrome-os-partner:32184 TEST=None Change-Id: I5e40c8cec8947ec0ec8f6d8c8fa2574cfb4dc958 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 636985334c9b3b93a12d4066d2829f1f999c9315 Original-Change-Id: Iecf44650aade60b9fa1b13e57da752fb482a3f3f Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/286240 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11016 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-21t210: Correct device MMIO rangeJimmy Zhang
Address region from 0x0 to 0x00ffffff is used for IROM_LOVEC and can not be accessed by Bootloader. Issue found in CL: 283104 is captured by this patch. BUG=None BRANCH=None TEST=Compiles successfully and reboot test does not crash in firmware Here are memory mapping table before and after this CL for evt2 board: Before: Mapping address range [0000000000000000:0000000040000000) as cacheable | read-write | secure | device Mapping address range [0000000040000000:0000000040040000) as cacheable | read-write | non-secure | normal Mapping address range [0000000040040000:0000000080000000) as cacheable | read-write | secure | device Mapping address range [0000000080000000:00000000feb00000) as cacheable | read-write | non-secure | normal Mapping address range [00000000fec00000:0000000100000000) as cacheable | read-write | secure | normal Mapping address range [0000000100000000:0000000140000000) as cacheable | read-write | non-secure | normal After: Mapping address range [0000000001000000:0000000040000000) as cacheable | read-write | secure | device Mapping address range [0000000040000000:0000000040040000) as cacheable | read-write | non-secure | normal Mapping address range [0000000040040000:0000000080000000) as cacheable | read-write | secure | device Mapping address range [0000000080000000:00000000feb00000) as cacheable | read-write | non-secure | normal Mapping address range [00000000fec00000:0000000100000000) as cacheable | read-write | secure | normal Mapping address range [0000000100000000:0000000140000000) as cacheable | read-write | non-secure | normal Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Change-Id: I07d38a8994c37bf945a68fb95a156c13f435ded2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3eee44944c2c83cc3530bfac0d71b86d3265f5b2 Original-Change-Id: I2b827064807ed715625af627db1826c3a01121ec Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/285260 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11015 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-21arm64: Set LOG_LEVEL=0 for BL31 if coreboot does not use serialFurquan Shaikh
Even if DEBUG=0, BL31 puts NOTICE(..) messages on serial console. Set LOG_LEVEL=0 if coreboot does not use serial. BUG=None BRANCH=None TEST=Compiles successfully and no console output from bl31 for production images. Change-Id: Ie77bcac3e2a0d314545b6811327c413536c77fb9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e8e3bcbf6249c80850a87dd66f34d3ff36158641 Original-Change-Id: I1415a3816cd2fa9dd05bcbd36ac0abc3f2759960 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/286150 Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/11014 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2015-07-21google/cyan: Configure EC_IN_RW signal as gpio inputHannah Williams
BUG=chrome-os-partner:42881 BRANCH=None TEST=Using ctrl-d in recovery mode to switch to dev mode works. Change-Id: Iefbd11d435c4beb570875d4835a085b194d1d1e8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: be172409792a224855b1d31621f23d1969d319b9 Original-Signed-off-by: Hannah Williams <hannah.williams@intel.com> Original-Change-Id: Icf57dfc4cc258aa2cba341f40d285f8c843aace5 Original-Reviewed-on: https://chromium-review.googlesource.com/286612 Original-Commit-Queue: Hannah Williams <hannah.williams@intel.com> Original-Tested-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-by: Shawn N <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/11013 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21mec: Correct the access mode for short payloadsJagadish Krishnamoorthy
If the Host Command payload is less than 4 bytes and is word aligned then the payload was not transferred at all. EC reads the old packet and CRC mismatch occurs. In this issue, the HC command packet consisting of EC_CMD_REBOOT_EC as command and EC_REBOOT_COLD as payload encountered the same problem as above. Hence select byte access mode for shorter payloads. BRANCH=None BUG=chrome-os-partner:42396 TEST=System should boot after chromeos-firmwareupdate Change-Id: I22bdb739108d31b592c20247be69c198d617d359 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8a43d2636b1bbfbac0384e1ea5e8853a7bd87a7f Original-Change-Id: I5572093436f4f4a0fc337efa943753ab4642d8e4 Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Original-Signed-off-by: Icarus Sparry <icarus.w.sparry@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/286537 Original-Reviewed-by: Shawn N <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/11012 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21skylake: add global reset cause registers to power stateAaron Durbin
Log the global reset causes in the power state structure. While working in there pack the struct and use width-specific types as this struct crosses the romstate <-> ramstage boundary. Lastly, remove hsio version as it wasn't being written or read. After global reset induced: PM1_STS: 0000 PM1_EN: 0000 PM1_CNT: 00000000 TCO_STS: 0000 0000 GPE0_STS: 00000000 00000000 00000000 00000000 GPE0_EN: 00000000 00000000 00000000 00000000 GEN_PMCON: d8010200 00003808 GBLRST_CAUSE: 00000000 00040004 Previous Sleep State: S0 BUG=None BRANCH=None TEST=Induced global reset on glados using ETR3 register and write to cf9. Change-Id: I97b93de336e74c0e02199241376e74340612f0a7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: bbc8f1d62131c0381e9d401f3281ee7a17fc2a47 Original-Change-Id: I1a8e5d07c6c0e09c163effe27491d8f198823617 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/286640 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/11011 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-21intel/cyan: Fix crossystem "wpsw_cur" statusHannah Williams
The GPIO mapping was incorrect for wpsw_cur. The GPIOs for East community were in two ranges: 0: INT33FF:02 GPIOS [373 - 384] PINS [0 - 11] and 12: INT33FF:02 GPIOS [385 - 396] PINS [15 - 26] The discontinuity was not accounted for, hence the error. The original offset was 0x16 whereas it should be 0x13 BUG=chrome-os-partner:42798 BRANCH=None TEST=Run crossystem and test wpsw_cur entry. If screw is present, it should be 1 and if not present, it should be 0 Change-Id: I2faea1fe1415c9d4cb23444d03c7c9d47c87e8e5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 30ac96f606a5618e9ef12bac3f50fac433141acd Original-Change-Id: I166a7c3e15a990b507ae3c13e15ab56bee7fb917 Original-Signed-off-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/286534 Original-Reviewed-by: Shawn N <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/11010 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21Kunimitsu: Add comment and separate routinesLee Leahy
Document the lid open state and separate the routines with a single blank line. BRANCH=none BUG=None TEST=Build and run on Kunimitsu Change-Id: I244f20c03bc7530ad8d140fba41dd97c12c079e1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 57313253fdef3f2d3f0e16b8ab8aa91202d45b16 Original-Change-Id: I7b3bd9cf16e915d214eb2de0017a8d91a934b112 Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/286267 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/11009 Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-21Kunimitsu: Remove address from copyright noticeLee Leahy
Remove the address from the copyright notices. BRANCH=none BUG=None TEST=Build and run on Kunimitsu Change-Id: Ibe8196841d9e76c9ee3a3dbae802ecc63dc7904c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: cc12d2658324a375d02748098f0a2f4b5d1b5615 Original-Change-Id: I81a71e4ad9b8a66ad0e9a93cbeb512d90eb35906 Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/286266 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/11008 Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Tested-by: build bot (Jenkins)
2015-07-21skylake: take into account deep s3 in power failure checkAaron Durbin
If a resume from S3 is occuring one needs to take into account deep S3 in order to check the proper power failure bits. When deep S3 is enabled the suspend well will be turned off. Therefore don't look for that bit when determining a power failure. BUG=chrome-os-partner:42847 BRANCH=None TEST=Suspend and resumed with deep s3 enabled and disabled. Change-Id: I2b3372a40b3d8295ee881a283b31ca7704e6764a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a3ba22be37d8700f4e8a4a0f5c05fb9290cfc9b2 Original-Change-Id: I890f71a7cbea65f1db942fe2229a220cf0e721b0 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/286271 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/11007 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-21skylake: read out and report full width of gen_pmcon registersAaron Durbin
GEN_PMCON_A and GEN_PMCON_B are 32-bits wide. Read out and save the full 32 bits for completeness. BUG=chrome-os-partner:42847 BRANCH=None TEST=Built and booted. Noted output on terminal. Change-Id: I24e589271d49c8cfc3fab327cfe4999c24fb95d8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5a419b2538dc45b1bd0d19b7e6afd45fff9dd4a0 Original-Change-Id: Ie587e886ea34e36d106ff4670781467266a51ddb Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/286270 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/11006 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-21Cyan: Tune charger current limit in performance states table.li feng
Charger performance states table defines charger current limit for each p state. Modify charger current control values for SANYO battery used in Cyan. BUG=None BRANCH=None TEST=System is charging battery, in shell window, issue command "echo 0 > /sys/class/thermal/cooling_device4/cur_state", "echo 1 > /sys/class/thermal/cooling_device4/cur_state", "echo 2 > /sys/class/thermal/cooling_device4/cur_state", "echo 3 > /sys/class/thermal/cooling_device4/cur_state", or "echo 4 > /sys/class/thermal/cooling_device4/cur_state", will see EC console show different charging current value. Change-Id: Ie9bc78822a73de6bed338bfbcc5e9045653689dc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3a6162151d1f9c756a13d2afc17f6b9c18608efc Original-Change-Id: I71e8247d057e4728eedcd5e8a275b64428290d09 Original-Signed-off-by: li feng <li1.feng@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/285605 Original-Reviewed-by: Icarus W Sparry <icarus.w.sparry@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Commit-Queue: Divya Jyothi <divya.jyothi@intel.com> Original-Tested-by: Divya Jyothi <divya.jyothi@intel.com> Reviewed-on: http://review.coreboot.org/11004 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21Glados: Update Serial IO modes in devicetreeNaveen Krishna Chatradhi
This patch updates the Serial IO modes for UART2 to PCI mode in devicetree for glados board. Also we switch over to CONSOLE_SERIAL8250MEM_32 here. 8-bit legacy UART will stop working after devicetree change. BRANCH=None BUG=chrome-os-partner:40857 TEST=Built for glados and tested LPSS logs on glados. CQ-DEPEND=CL:284881 CL:284882 CL:284883 Change-Id: I433979c852c80848c006ef089b43d75a17e761c5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2c37519e0762801cbb9b547b538b385c84299189 Original-Change-Id: I2faec08d089e407c5ab9838bea980553f49821c4 Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/284826 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com> Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Reviewed-on: http://review.coreboot.org/11002 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-21kunimitsu: Update Serial IO modes in devicetreeNaveen Krishna Chatradhi
This patch updates the Serial IO modes for UART 1 and 2 in devicetree for kunimitsu boards. UART1 are disabled and UART2 is in PCI mode. BRANCH=None BUG=chrome-os-partner:40857 TEST=Built for kunimitsu and tested LPSS logs on Kunimitsu. Change-Id: I5a46ab9e0b792478ee2e0845aeab1443423a2fac Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 38c7b963a9d679ee5106c5343e1173d0b5056627 Original-Change-Id: I39cbb6bb0991e5f9b3365adaf6b24818d112cd1a Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/284825 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com> Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Reviewed-on: http://review.coreboot.org/11001 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21Sklrvp: Update Serial IO modes in devicetreeNaveen Krishna Chatradhi
This patch updates the Serial IO modes for UART 1 and 2 in devicetree for sklrvp boards. UART1 is disabled and UART2 is in PCI mode. BRANCH=None BUG=chrome-os-partner:40857 TEST=Built for sklrvp and tested LPSS logs on RVP3. Change-Id: I59a657d6a3744040ec6be290ba966672e0e5f17e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5a20a70801d66abd87d4214e1ef187b86eed99da Original-Change-Id: I381374272e1824ca8887ea5c5662215dde2c0a56 Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/284824 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com> Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Reviewed-on: http://review.coreboot.org/11000 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-21intel/skylake: support 32bit uart8250_mem driver in romstageNaveen Krishna Chatradhi
This patch adds 32bit uart8250_mem functionality in romstage console for arch/x86. BRANCH=None BUG=chrome-os-partner:40857 TEST=Built for sklrvp; verified romstage logs on RVP3 board. Change-Id: I6f13216b7f5ba8de48c781cd1791d0fa7ae0d921 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a17efdeec5524cbfc78015c358d1cf4f67485765 Original-Change-Id: I8b4e44c59bfd609a06807243df338763054b5865 Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Original-Signed-off-by: Rishavnath Satapathy <rishavnath.satapathy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/271800 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com> Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Reviewed-on: http://review.coreboot.org/10999 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21console: Add UART8250MEM 32bit supportNaveen Krishna Chatradhi
This patch adds UART8250MEM_32 feature flag to support UART8250 compatible with 32bit access in memory mapped mode. [pg: rebuilt to reuse the existing UART8250 8bit access driver which reduces code duplication.] Change-Id: I310e70dfab81dcca575e9931e0ccf93af70efa40 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0c3b2c628b854e8334540ff5158c2587dbfabf95 Original-Change-Id: I07ee256f25e48480372af9a9255bf487c331e51d Original-Signed-off-by: Rishavnath Satapathy <rishavnath.satapathy@intel.com> Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/271759 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com> Reviewed-on: http://review.coreboot.org/10998 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-21google/glados: add new boardPatrick Georgi
Change-Id: I0c196ff84484717c59c59d11bb7230b5920e0654 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10997 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21intel/common: remove printk in pre_console_init()rsatapat
printk called before console init causes sluggish execution because of Rx timeout. BRANCH=None BUG=chrome-os-partner:40857 TEST=Built for sklrvp and tested LPSS logs on RVP3 and Kunimitsu. Change-Id: I61d5c0f5a4e93695bcba90b7ac7d4f68e2d625be Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 77c58702c8279c6d9c6ae1c946bf1b76df20714d Original-Change-Id: Ib85029456059248cc2c88aaccba4fa12cc5a76be Original-Signed-off-by: rsatapat <rishavnath.satapathy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/284823 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com> Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Reviewed-on: http://review.coreboot.org/10996 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21Skylake: Initialize GPIOs for UART2rsatapat
FSP will initialize GPIOs during TempRamInit. So configure LPSS UART2 GPIOs in native mode after TempRamInit. BRANCH=none BUG=chrome-os-partner:41374 EST=Build and boot on RVP3. Check LPSS logs on UART2 Change-Id: I8016dd76a5bc06e90f9460273be7e83c5e8f8bb1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: eb72e715ef3f566e900727ac8b9494bca1d5971c Original-Change-Id: If1b1a1047ebd5e5f170d91972d11c51aa6fd84a9 Original-Signed-off-by: rsatapat <rishavnath.satapathy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/281604 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com> Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Reviewed-on: http://review.coreboot.org/10995 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21Skylake: Only support UART2 as debug port, clean up the restNaveen Krishna Chatradhi
On Skylake, only UART2 is supported as debug port and the macros INTEL_PCH_UART_CONSOLE_NUMBER, INTEL_PCH_UART_CONSOLE and the partial code for UART0, 1 are cleaned up for Skylake and Sklrvp, Kunimitsu and Glados boards. BRANCH=none BUG=chrome-os-partner:40857 TEST=Built for kunimitsu, checked the coreboot logs on LPSS UART2 Change-Id: I2fbcfb1d1ca6f59309a77c67d022cf4f5da7f7c0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e714c18d462bc7bdd7068309fb6be77da6973642 Original-Change-Id: I9343abd90ce685ea2d676047dccbefad7457b69f Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/285793 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com> Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Reviewed-on: http://review.coreboot.org/10994 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21intel fsp: remove CHIPSET_RESERVED_MEM_BYTESAaron Durbin
FSP 1.1 platforms should be conforming to the spec. In order to ensure following specification remove the crutch that allows FSP to no conform. BUG=chrome-os-partner:41961 BRANCH=None TEST=Built. Change-Id: I28b876773a3b6f07223d60a5133129d8f2c75bf6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c3fe08c5af41867782e422f27b0aed1b762ff34a Original-Change-Id: Ib97027a35cdb914aca1eec0eeb225a55f51a4b4b Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/285187 Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/10993 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-21cyan/strago: Disable wwanJagadish Krishnamoorthy
Disabling the wwan gpio line since wwan is not used. BRANCH=none BUG=none TEST=wwan should not connect to network on cyan/strago. Change-Id: I9d2e5d5b185a4622218e894d3b092afe15e09289 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9a20c602b3bb768baa38b17e21cb4e5b0d9249ef Original-Change-Id: Ib8d5fd15a172ef898ce675a85c2ea3e5f5c79144 Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/285304 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10992 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-21Braswell: Remove GOP from normal boot mode.Abhay Kumar
Removing GOP initialization in normal mode since we don't need to show splash screen in normal mode. GOP will get initialized in dev and recovery mode. BRANCH=none BUG=None TEST=Splash screen will come only in dev or recovery mode. Change-Id: Ia5e12cf45d723f2f14c447e29b78119552d5e1ea Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 79d1c877343704ea51143b922d9ac9209be4d4b5 Original-Change-Id: Id5ca99757427206413483d07b4f422b4c0abfa5d Original-Signed-off-by: Abhay <abhay.kumar@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/285300 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10990 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-21skylake: re-enable PCIe L1 sub statesAaron Durbin
All boards should have their L1 sub states working now so re-enable the defaults. BUG=chrome-os-partner:41861 BRANCH=None TEST=Built and booted glados into OS. PCIe devices show up still. Change-Id: Ic040fa108a662e15bb97cf8b0961f0f56683e146 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 380491f8267e60c3c6bc62486aaf21e201fcfd36 Original-Change-Id: Idc6923b1fdd1c20d463eb7782be112f90b9adbfd Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/285170 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/10989 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-21Sklrvp: Select PCIEXP_L1_SUB_STATE config symbolNaveen Krishna Chatradhi
This patch selects the config symbol PCIEXP_L1_SUB_STATE to enable L1 substate for PCIe. BRANCH=None BUG=chrome-os-partner:42331 TEST=Build for sklrvp; boot and check "dmesg | grep iwl" shows "L1 enabled and LTR enabled" Change-Id: I97552c7700649a9f5d8646a03027c5c5e0b477b4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d3115816fbdd11c7f8ff418e0b5c86b8650c8b83 Original-Change-Id: Iaf307cb2d623cc1ce97b01d15a6b42569fd0c0c4 Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/284775 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Reviewed-on: http://review.coreboot.org/10988 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-21skylake: honor pcie root port settings already in chip.hAaron Durbin
For some unkonwn reason the pcie root port settings weren't being honored in the device tree. Fix that omission. BUG=chrome-os-partner:41861 BRANCH=None TEST=Built with CONFIG_DISPLAY_UPD_DATA and noted devicetree settings were being honored. Change-Id: Id880eca57544efb13f5cbbc06b2634c86b7c5d29 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2d00e68ce6cfcb3d63d69848f4a8ce232f6c1257 Original-Change-Id: Idd37d65374842294f4b0c91eb841c6d1d93e92ee Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/285027 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/10987 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-21skylake: Show SPI controller if enabled in devicetree.cbDuncan Laurie
Unhide the SPI controller PCI device if it is enabled in devicetree.cb so flashrom can do its job. BUG=chrome-os-partner:37711 BRANCH=none TEST=run flashrom -r on glados Change-Id: Ie567f970149700d29df0ae09db4962f36cf24219 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 172eac55ad6134fe5e347e37c055b383e3b03245 Original-Change-Id: Ia77b559cc607794aecc25d6d469224d855199568 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/284948 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10986 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21cyan: Enable EC software syncRavi Sarawadi
BUG=chrome-os-partner:40526 BRANCH=None TEST=Verify that system boots when used with coreboot and EC versions that also have Software Sync enabled. Change-Id: I6ed562fa51d83ddf16fc74d35db7c0004f57c79e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 090a66c50fac21808c4721a32b1728cc904f1b00 Original-Change-Id: Ia4d87d9a177c579567c03ae113889a277ffecee0 Original-Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/283573 Original-Commit-Queue: Divya Jyothi <divya.jyothi@intel.com> Original-Tested-by: Divya Jyothi <divya.jyothi@intel.com> Original-Reviewed-by: Shawn N <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/10985 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21Revert "northbridge/amd/pi: Add support for memory settings"Marc Jones
This is breaking the build right now. Reapply once the correct headers are in place. This reverts commit 406effd59075cab212c5bf9c1a12759c8fad50a4. Change-Id: I34b8717820ed58b462d4e7793711ee98fb8b882f Reviewed-on: http://review.coreboot.org/11020 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21amd/hudson: Fix makefile FWM location checkMarc Jones
Fix typo. Use the correct math helper int-lt. Change-Id: Ia5e722020c75595dfcfb853ea8238fb8391f9a04 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/10980 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21braswell: clean up \_PR entriesJagadish Krishnamoorthy
All \_PR entries needs to be changed from CPU# to CP## so that it can support more cores. BRANCH=none BUG=chrome-os-partner:38734 TEST=build and boot cyan/strago boards. Change-Id: I80a79ec8edbce46826140470645b7532ae361f91 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ca269a7ffcd2ef16fcef93851e68c2d91104e3e1 Original-Change-Id: I48e73742dc3b11ee6e96f70bcd2d10d01609ad7c Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/285700 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10991 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-20northbridge/amd/pi: Add support for memory settingsDave Frodin
This adds support for binarypi based boards that have to make adjustments to the memory configuration settings. A PlatformMemoryConfiguration[] table that describes the memory configuration must be defined in the mainboard folder. Change-Id: I5e4b476a4adf3dd1f3b7843274a81ecb243d10ab Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/10672 Tested-by: build bot (Jenkins) Reviewed-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-07-18cbfstool: Deduplicate code to merge empty filesPatrick Georgi
The code for removing a file had its own merge routine. Use the generic one instead. Change-Id: I90ed007ab86f78a2728f529fa0143c5c1dfbbdc3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/10967 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-18cbfstool: rename checksum to attributes_offsetPatrick Georgi
So far it's still unused, but its purpose will change: It will become an offset to another structure that contains additional file attributes. This change is compatible because the binary format doesn't change and so far the field was always set to 0, which can serve nicely as 'unused' field. Change-Id: I2dafb06866713d43a236556f9492641526270837 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10933 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-18Makefile: Fix KCONFIG_AUTOHEADER dependenciesStefan Reinauer
This makes the Makefile more robust when changing the file name or changing the .config outside of make *config Change-Id: Ifc013cc3ef899a7846742a961261ac50bc67e27b Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10970 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-18libpayload: usb: Add support for SuperSpeed hubsJulius Werner
This patch adds support for the SuperSpeed half of USB 3.0 hubs, which previously prevented SuperSpeed devices behind those hubs from working. BRANCH=None BUG=chrome-os-partner:39877 TEST=Played around with multiple hubs and devices on Oak and Falco, can no longer find a combination that doesn't work. Change-Id: I20815be95769e33d399b7ad91c3020687234e059 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3db96ece20d2304e7f6f6aa333cf114037c48a3e Original-Change-Id: I2dd6c9c3607a24a7d78c308911e3d254d5f8d91d Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/284577 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: chunfeng yun <chunfeng.yun@mediatek.com> Reviewed-on: http://review.coreboot.org/10958 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-18libpayload: usb: xhci: Prevent address reuseJulius Werner
We have been trying to avoid reassigning previously used USB addresses to different devices since CL:197420, because some devices seem to take issue with that. Unfortunately, that patch doesn't affect XHCI: those controllers insist on chosing addresses on their own. The only way to prevent them from reusing a previously assigned address is to not disable that slot at all. This patch implements address reuse avoidance on XHCI by not disabling slots when a device is detatched (which may occur both on physical detachment or if we simply couldn't find a driver for that device). Instead, we just release as many resources as we can for detached devices (by dropping all endpoint contexts) and defer the final cleanup until the point where the controller actually runs out of resources (a point that we probably don't often reach in most firmware scenarios). BRANCH=none BUG=chrome-os-partner:42181 TEST=Booted an Oak plugged into a Servo without having a driver for the SMSC network chip, observed that it could still enumerate the next device afterwards. Kept unplugging/replugging stuff until the cleanup triggered and made sure the controller still worked after that. Also played around a bit on a Falco without issues. Change-Id: Idfbab39abbc5bc5eff822bedf9c8d5bd4cad8cd2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 88c6bcbc41156729c3c38937c8a4adebc66f1ccb Original-Change-Id: I0653a4f6a02c02498210a70ffdda9d986592813b Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/284175 Original-Tested-by: Nicolas Boichat <drinkcat@chromium.org> Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10957 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-18amd/pi: Increase assumption for maximum CBFS file header sizePatrick Georgi
The new attributes increase the header size, breaking this assumption. Change-Id: Ib23862f27650b39133deafb74a24327b098b6e86 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10942 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-07-18cbfstool: move fill value to cbfs.hPatrick Georgi
Change-Id: Ie05db6d43219c65d08e2221009875f81eb29b630 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/10968 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-18intel/kunimitsu: Fix Kconfig symbol typePatrick Georgi
BOOT_MEDIA_SPI_BUS is int, not hex. Change-Id: I5cbcc3889a025caab921208037c8a61d224078a7 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/10973 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-07-17soc/intel: Remove microcode terminatorsStefan Reinauer
They have been removed in the rest of the code already. http://review.coreboot.org/#/c/4506/ Change-Id: I232cc2ccd4dd90359de4ab710486db65667500f4 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10964 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-17intel/sklrvp: remove trailing whitespacePatrick Georgi
Change-Id: If933a70992a6ae8228eef8d4f0386387b4e4549d Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/10966 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-17skylake: remove whitespace from ASL filesStefan Reinauer
Found by the commit hooks. Change-Id: I9baa90ca0111ddc9cb69cbb7dd17f63e8a98a04f Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10965 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-17mainboard/google: Add Braswell based Cyan boardLee Leahy
Add initial files for the cyan board. Matches chromium tree at 927026db This board uses the Braswell FSP 1.1 image and does not build without the FspUpdVpd.h file. BRANCH=none BUG=None Test=Build and run on cyan Change-Id: I935839be033c25e197e78fbee306104b4162a99a Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10182 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-17mainboard/intel: Add Skylake based Kunimitsu boardLee Leahy
Initial files to support the Kunimitsu board. Matches chromium tree at 927026db This board uses the Skylake FSP 1.1 image and does not build without the FspUpdVpd.h file. BRANCH=none BUG=None TEST=Build and run ChromeOS on kunimitsu Change-Id: I1017a66bc811af51a0921e864b589ce2cb618082 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10836 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-17mainboard/intel: Add Skylake based RVP3 boardLee Leahy
Initial files to support the Intel Skylake RVP3 Matches chromium tree at 927026db This board uses the Skylake FSP 1.1 image and does not build without the FspUpdVpd.h file. BRANCH=none BUG=None TEST=Build and run on sklrvp Change-Id: I5e7fff8f62a737e627e25c1e03e343d6167041ea Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10343 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-17mainboard/intel: Add Braswell based Strago boardLee Leahy
Add the initial files to support the Intel RVP for Braswell. Matches chromium tree at 927026db This board uses the Braswell FSP 1.1 image and does not build without the FspUpdVpd.h file. BRANCH=none BUG=None TEST=Build and run ChromeOS on strago Change-Id: I5cb2efe3d8adf919165c62b25e08c544b316a05a Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10052 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-17lint/gitconfig: Enable checkpatch.pl checking of commitsStefan Reinauer
This patch enables running the checkpatch script on the code portion of each commit as part of the pre-commit hook. At this point there is no checking of the commit message in place (e.g. for typos) Change-Id: I7cdf0692cf372986e411f4aba4691417b73c7511 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/8419 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-07-17indent style fix for lapic_cpu_init.cJonathan A. Kollasch
Change-Id: I2821aaed1bc6324e671f68e4e4effb9dd006dcd9 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10922 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-17Remove unused Kconfig symbols in c codeMartin Roth
The BROKEN_CAR_MIGRATE symbol was removed in commit a6371940 - x86 cache-as-ram: Remove BROKEN_CAR_MIGRATE option The symbol DISABLE_SANDYBRIDGE_HYPERTHREADING is from Sage, and was never added to the coreboot.org codebase. Change-Id: I953fe7c46106634a5a3fcdaff88b39e884f152e6 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10941 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-16libpayload: usb: dwc2: support split transactionYunzhi Li
With split transaction, dwc2 host controller can handle full- and low-speed devices on hub in high-speed mode. This commit adds support for split control and interrupt transfers BUG=None TEST=Connect usb keyboard through hub, usb keyboard can work BRANCH=None Change-Id: If7a00db21c8ad4c635f39581382b877603075d1a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4fb514b7f7f7e414fa94bfce05420957b1c57019 Original-Change-Id: I07e64064c6182d33905ae4efb13712645de7cf93 Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/283282 Original-Tested-by: Lin Huang <hl@rock-chips.com> Original-Commit-Queue: Lin Huang <hl@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/10956 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-16t210: new sdram_lp0_save_params() functionYen Lin
New sdram_lp0_save_params() function for T210. Due to its size, move the function from romstage to ramstage. BUG=chrome-os-partner:40741 BRANCH=None TEST=Build ok on Smaug; and check scratch registers Change-Id: I420ac4c15262f2c6307bcd84beb6c5da0310c7c0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 38860895938c40062a9f860f75e31a539f15992b Original-Change-Id: Iaa478969458946faedd295578fe7d72b5a32e701 Original-Signed-off-by: Yen Lin <yelin@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/277022 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/10952 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-16foster: correct odmdata in odmdata.cfgYen Lin
So odmdata has the correct UART port of 0 BUG=chrome-os-partner:40741 BRANCH=None TEST=build Foster ok; and check scratch20 register Change-Id: I2c203317e6305214b74430780f2fe7b15652873a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0a0a99ac9c7db267129e4bc3478f9bb1ece08507 Original-Change-Id: I7be10d5deb5118f1cf3e339afca94893610437f2 Original-Signed-off-by: Yen Lin <yelin@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/280291 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/10955 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-16smaug: correct odmdata in odmdata.cfgYen Lin
So odmdata has the correct UART port of 0. BUG=chrome-os-partner:40741 BRANCH=None TEST=build Smaug ok; and check scratch20 register Change-Id: I59154daa5b5627d3b594ff9505e4f02de0d4d7aa Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 814cd164ab9ed9bf2e072f3728e89ea8d7cf0343 Original-Change-Id: I2252b728775cf2550d666ead0085c0ab3b72e40b Original-Signed-off-by: Yen Lin <yelin@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/277024 Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/10954 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-16t210: correct odmdata location in bctYen Lin
Correct the odmdata location in bct for T210. BUG=chrome-os-partner:40741 BRANCH=None TEST=build ok on Smaug Change-Id: I2258556ec5cf5d25782e60e084f3d5657b441c86 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 288a5d71c35fbea1812ad0c91f2c6c5f5a022363 Original-Change-Id: I0efb033442c2aafc7f44898c16b3e91946e092d5 Original-Signed-off-by: Yen Lin <yelin@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/277023 Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/10953 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-16foster: add sdram_configs.cYen Lin
Add sdram_configs.c to both romstage and ramstage. BUG=chrome-os-partner:40741 BRANCH=None TEST=Build ok on Foster Signed-off-by: Yen Lin <yelin@nvidi.com> Change-Id: Ib270c837ebe355c8d16072186c2b27d1c469fd48 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 73bc1abf2821176c21179880774887eec7c858b1 Original-Change-Id: Ia80a57a81e44542ee3d5437866071d50c8c5b8cb Original-Reviewed-on: https://chromium-review.googlesource.com/280290 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Tested-by: Yen Lin <yelin@nvidia.com> Original-Commit-Queue: Yen Lin <yelin@nvidia.com> Reviewed-on: http://review.coreboot.org/10951 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-16smaug: ramstage: include sdram_configs.cYen Lin
get_sdram_config() (in sdram_configs.c) will be needed in ramstage. BUG=chrome-os-partner:40741 BRANCH=None TEST=Build ok on Smaug Change-Id: I2920f8687b6a801a91dc5b5b50fc5637057e4321 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4d3092e360b26cbda41549452aeeba9ffc0b92ed Original-Change-Id: I43a20f3178cbf5b57a3a9ca7391856787aa8cdb8 Original-Signed-off-by: Yen Lin <yelin@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/277373 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/10950 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-16smaug: Use VNBN_FLASH instead of VBNV_ECFurquan Shaikh
CQ-DEPEND=CL:285312 BUG=chrome-os-partner:36613 BRANCH=None TEST=Compiles successfully and boots to kernel prompt Change-Id: Ib90333e3331a90b4539d49e1a72833fe3385879f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 042fc1a451081780f8af35af6943130f6412ca5f Original-Change-Id: I729996c04d8bd6a627421803a59037d7c47a3e98 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/285345 Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/10949 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-16t210: Reorganize memlayout.ldFurquan Shaikh
Take up space from PRERAM_CBMEM_CACHE and increase verstage and romstage sizes. BUG=chrome-os-partner:36613 BRANCH=None TEST=Compiles successfully and boots to kernel prompt Change-Id: I7fdd6c08f3ca1998a6220edd80a570816ec65ab5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: cce3d7baa7446e227d3da41341d9e273d4195299 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/285344 Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org> Original-Change-Id: I6d97a60b26fbbb29a875285c46724fb43b5fe5ab Original-Reviewed-on: https://chromium-review.googlesource.com/285533 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/10948 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-16t210: SPI driver cleanupFurquan Shaikh
1. Get rid of spi_delay - Instead have a tight loop to check for the spi status 2. The first check for SPI operation complete i.e. FIFOs have been processed is the SPI_STATUS_RDY bit. Thus, tegra_spi_wait should check for this bit before reading BLOCK_COUNT or any other fifo count field. 3. Flush both TX and RX FIFOs for SEND and RECV operations for PIO and DMA. 4. No need to check for rx_fifo_count == spi_byte_count to determine pio_finish operation. RDY bit should be sufficient to ensure that the SPI operation is complete. Added assert to ensure we never hit the case of RDY bit being set, yet rx_fifo_count != spi_byte_count for PIO. BUG=chrome-os-partner:41877 BRANCH=None TEST=Compiles successfully and reboot test runs successfully for 10K+ iterations. Change-Id: I1adb9672c1503b562309a8bc6c22fe7d2271768e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: de1515605e17e0c6b81874f9f3c49fd0c1b92756 Original-Change-Id: I5853d0df1bfd6020a17e478040bc4c1834563fe4 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/285141 Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/10947 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-16t210: Correct dma_busy functionFurquan Shaikh
In case of continuous mode, use STA_ACTIVITY bit to determine if DMA operation is complete. However, in case of ONCE mode, use STA_BSY bit to determine if DMA operation on the channel is complete. BUG=chrome-os-partner:41877 BRANCH=None TEST=Compiles successfully and reboot test runs fine for 10K+ iterations Change-Id: If98f195481b18c402bd9cac353080c317e0e1168 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 927026db6fd910dac32dc218f28efcbc7b788b4e Original-Change-Id: Ib66bedfb413f948728a4f9cffce9d9c3feb0bfda Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/285140 Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/10946 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-16smaug: Increase drive strength for QSPI PinmuxFurquan Shaikh
Change the drive strength for QSPI Pinmux to DRIVE_STRENGTH_2 as per recommendations from nVidia hardware engineers. BUG=chrome-os-partner:41877 BRANCH=None TEST=Compiles successfully and boots to kernel prompt Change-Id: I5a7b94acb57bbc21d277a49fd0a6b892638fc0ca Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 58d085e6acbcd0fd355b1c7efc10606312caf8e8 Original-Change-Id: I03dd288d2e335d40c83feaec7efbf10a7d3bf1e6 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/284959 Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/10945 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-16t210: Add PINMUX macros for drive strengthFurquan Shaikh
BUG=chrome-os-partner:41877 BRANCH=None TEST=Compiles successfully and boots to kernel prompt Change-Id: Ic606838639d33242b227fece9cbb019d8f3b3729 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 805831489ad80e4ed335ece458f81238af704876 Original-Change-Id: I54a730c3b97c3603a5b1981089913c58af2a42db Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/284958 Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/10944 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-16toolchain: Add -mgeneral-regs-only to CFLAGS for arm64Furquan Shaikh
BUG=None BRANCH=None TEST=Compiles successfully and boots to kernel prompt on smaug Change-Id: I7eb75b215798a63157bae04d9d44dbd6f95a5715 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6e5ecf9b45fa35e3c87bf6ef4bd2ea01680c8826 Original-Change-Id: I36a20d65d7ccaa21fdeb6070d43c2bb0ae22a16b Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/285553 Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/10959 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-16release: add release scriptPatrick Georgi
Change-Id: Ib3cd29cf1875e7ad182262d7caa33ff35f28aa85 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10909 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-16cbfstool: Remove extra comma after {0, NULL} list elementSol Boucher
Trailing commas are useful for lists that can be extended. These lists are 0-terminated, and there should be no elements following that. Change-Id: Iea8c6d5579d6363e77e1f5af666948160c4a9bf9 Signed-off-by: Sol Boucher <solb@chromium.org> Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Change-Id: I1a117a9473e895feaf455bb30d0f945f57de51eb Original-Signed-off-by: Sol Boucher <solb@chromium.org> Reviewed-on: http://review.coreboot.org/10932 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-16cbfstool: Factor out compression algorithm listSol Boucher
Parse compression algorithm arguments using a single list. Change-Id: Idc5b14a53377b29964f24221e42db6e09a497d48 Signed-off-by: Sol Boucher <solb@chromium.org> Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Change-Id: I1a117a9473e895feaf455bb30d0f945f57de51eb Original-Signed-off-by: Sol Boucher <solb@chromium.org> Reviewed-on: http://review.coreboot.org/10931 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-16cbfstool: rename fieldSol Boucher
With introducing hash algorithms, 'algo' is ambiguous, so rename it to 'compression' instead. Change-Id: Ief3d39067df650d03030b5ca9e8677861ce682ed Signed-off-by: Sol Boucher <solb@chromium.org> Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Change-Id: I1a117a9473e895feaf455bb30d0f945f57de51eb Original-Signed-off-by: Sol Boucher <solb@chromium.org> Reviewed-on: http://review.coreboot.org/10930 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-16cbfstool: move bit swapping macros to swab.hSol Boucher
Change-Id: Id22232c45225011951e01c370e0f473af574d758 Signed-off-by: Sol Boucher <solb@chromium.org> Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Change-Id: I1a117a9473e895feaf455bb30d0f945f57de51eb Original-Signed-off-by: Sol Boucher <solb@chromium.org> Reviewed-on: http://review.coreboot.org/10929 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-16cbfstool: use variable length array to model cbfs_file's filenamePatrick Georgi
Change-Id: Ib056983630b2899d7e6cbcb43f6b7153f0f8e282 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10928 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-16cbfstool: improve specification of struct cbfs_filePatrick Georgi
Lock down its size and document some of the fields Change-Id: I09fd6c80185345da0ae17d0f4498b50995fd1ec5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10927 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-07-16soc/intel: Add Skylake SOC supportLee Leahy
Add the files to support the Skylake SOC. Matches chromium tree at 927026db BRANCH=none BUG=None TEST=Build and run on a Skylake platform Change-Id: I80248f7e47eaf13b52e3c7ff951eb1976edbaa15 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10341 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-16soc/intel/skylake: Use Broadwell as comparision base for Skylake SOCLee Leahy
Use the Broadwell implementation as the comparison base for Skylake. BRANCH=none BUG=None TEST=None Change-Id: I22eb55ea89eb0d6883f98e4c72a6d243e819e6d8 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10340 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-16x86 realmode: Set up the 8254 timer before running option romzbao
If the 8254 is not set up, the external graphics option rom hangs and never returns. The code is tested on AMD/bettong. Change-Id: I0022de9d9a275a7d4b7a331ae7fcf793b9f4c5f5 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/10903 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-07-16AMD Merlin Falcon: Mask bit 31 of BIST while doing BIST checkzbao
This is a result of the Silcon Observation. On warm reset, the BIST is 0x80000000, which causes BIST error. We skip checking this bit. The update will be in CZ BKDG 1.05. The code is tested on AMD/bettong. Change-Id: I51c3f3567f758766079f7c8789f1ff072e1a7c53 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/10902 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-07-15amd/model_fxx rev.F: emit P-states when no intermediates existJonathan A. Kollasch
Relevant for systems having processors that only have two (the minimum and maximum) P-states, such as the Opteron 2210 at 1.0 and 1.8GHz. Change-Id: Ic66fe6d10ce495c1bf21796cb7e1eb4e11e85283 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10910 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-15libpayload: assume cbfs file alignment is 64 bytePatrick Georgi
Change-Id: I8dfd8fbd452ce92fbca2cf095bc5e43e4a26969d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10920 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-15cbfs: hardcode file alignmentPatrick Georgi
Assume that it's 64 byte. Change-Id: I168facd92f64c2cf99c26c350c60317807a4aed4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10919 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-15cbfstool: fix alignment to 64 bytePatrick Georgi
It's not like we _ever_ changed it, so drop the option and make cbfstool use the default. always. Change-Id: Ia1b99fda03d5852137a362422e979f4a4dffc5ed Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10918 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-15intel/fsp_baytrail: Remove PcdEnableLan optionYork Yang
Bay Trail SOCs do not integrate LAN controller hence Baytrail FSP has no LAN control function. Remove PcdEnableLan option from UPD_DATA_REGION structure. Change-Id: I9b4ec9d72c8c60b928a6d9755e94203fb90b658f Signed-off-by: York Yang <york.yang@intel.com> Reviewed-on: http://review.coreboot.org/10837 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-14timestamps: clarify in ramstage when not to reinit the cacheAaron Durbin
Commit bd1499d3 fixed a bug to not re-initialize the timestamp cache in ramstage for EARLY_CBMEM_INIT. However, EARLY_CBMEM_INIT was not included. Therefore, add this condition. This will result in base_time being initialized to the passed in timestamp for !EARLY_CBMEM_INIT platforms. Change-Id: Ia1d744b3cfd28163f3339f2364efe59f7dcb719b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10884 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-14cbmem: export base_time in timestamp tableAaron Durbin
It's helpful to know the base_time (1st timestamp) in the timestamp table because it provides more information like the accumulated time before the first timestamp was recorded. In order to maximize this information report the base time as an entry that is printed. It's called '1st timestamp'. The implementation turns all the timestamp entries into absolute times so one can observe both absolute and relative time for each marker. Change-Id: I1334a2d980e3bcc2968a3bd6493c68b9efcca7ae Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10883 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-14libpayload: store boot media information in sysinfoPatrick Georgi
Write boot media information in sysinfo, if it exists. This allows picking the right CBFS for further files in case there are several. Change-Id: I75a8ee6b93f349b9f2fab1e82826aba675949c0a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10869 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-07-14cbtable: describe boot mediaPatrick Georgi
This allows finding the currently used CBFS (in case there are several), and avoids the need to define flash size when building the payload. Change-Id: I4b00159610077761c501507e136407e9ae08c73e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10867 Tested-by: build bot (Jenkins)
2015-07-14abuild: Allow disabling mainboardsPatrick Georgi
There may be boards that shouldn't be built for one reason or another. Allow black-listing them by adding a file to the mainboard directory called 'abuild.disabled'. It should contain the reason that is printed by abuild and also serves as documentation for users that want to know what's going on. Change-Id: I78c3281a578e96ee40f6b101143d4f3763582350 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10917 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-14Braswell: Use CBFS image type nameLee Leahy
Use the simplified CBFS image type name in Makefile.inc. BRANCH=none BUG=None TEST=Build and run on cyan Change-Id: Idb62de7fce36fde38a6fbeeefdfc2dd0d75bd493 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10872 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-07-14libpayload: Add support for handling fmapsPatrick Georgi
They will become more common soon, so better support them now. Change-Id: I2b16e1bb7707fe8410365877524ff359aeefc161 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10868 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-14riscv-emulation: Set stack size to 0 in KconfigThaminda Edirisooriya
Build now decides the stack size by correctly referencing the value in /src/mainboard/emulation/qemu-riscv/memlayout.ld. Note that while the size is correct, the placement is still wrong, and causes the stack to be corrupted by the coreboot tables. Still needs to be addressed Change-Id: I86c08bd53eeb64e672fecba21e06220694a4c3dd Signed-off-by: Thaminda Edirisooriya <thaminda@google.com> Reviewed-on: http://review.coreboot.org/10870 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-07-14fmap: publish find_fmap_directory()Patrick Georgi
The fmap directory can be useful to pass to the payload. For that, we need to be able to get it. Change-Id: Ibe0be73bb4fe28afb16d4d215b979eb0be369645 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10866 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-14fmap: Introduce new function to derive fmap name from offset/sizePatrick Georgi
vboot passes around the offset and size of the region to use in later stages. To assign more meaning to this pair, provide a function that returns the fmap area name if there's a precise match (and an error otherwise). Change-Id: I5724b860271025c8cb8b390ecbd33352ea779660 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10865 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-14getac/p470: initialize timestamps in romstagePatrick Georgi
Change-Id: I2f43684bbdd48f30039fe09275043ddf203d447c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10907 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-14azalia: fix up and clean up shrinkage of boilerplate codeJonathan A. Kollasch
Should fix regression in HDA verb setup on nvidia mcp55 and intel sch southbridges. The mcp55 code could not find the mainboard's verb table because the table was not even being compiled in. The sch boards appeared to have the same issue. Intel broadwell and fsp_bd82x6x seemed to have not gotten the boilerplate shrink, so apply it to those too. Followup-to: Ib3e09644c0ee71aacb067adaa85653d151b52078 (azalia: Shrink boilerplate) Change-Id: If7aae69f5171db67055ffe220bdff392caaa5d9f Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10826 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-14amd/rs780: Fix typoPatrick Georgi
Change-Id: I08f7251f8fc42b9028b1fdb830546f9922ef43aa Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: YongGon Kim <ilios86@gmail.com> Reviewed-on: http://review.coreboot.org/10914 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
2015-07-14cbmem: convert x86 timestamps on OpenBSDPatrick Georgi
Change-Id: I16bfe42a00d73209307655601edaa3a8ffc9c902 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/10905 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-14intel/sandybridge/gma: Add graphics PCI Device IDs 0x0162 and 0x0152Damien Zammit
Change-Id: Ide0fd757cdd31a5b5ff184f7ab2d48e62ea50015 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: http://review.coreboot.org/10896 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-14buildgcc: Show the archive URLPaul Menzel
In case of downloading errors, the URL is handy for analyzing the cause. Change-Id: I6874cdc3c881cfdd52c80f80323536c30723654b Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/10853 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless@gmail.com>
2015-07-14amd/fam10: Add k10temp ACPI thermal zone mixin.Tobias Diedrich
This ACPI thermal zone is applicable to AMD family 10 to 14 (and some 15) CPUs. It should not be used on boards for which errata 319 (The thermal sensor of Socket F/AM2+ processors may be unreliable) is applicable. AM3 and later should be fine. Derived from src/northbridge/amd/amdk8/thermal_mixin.asl Change-Id: Id036cbf4cd717c3320a720edc452945df2b5e072 Signed-off-by: <ranma+coreboot@tdiedrich.de> Reviewed-on: http://review.coreboot.org/10617 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 22:45:44 +0000