summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-22mb/google/octopus: Add EC_HOST_EVENT_PANIC to SCI maskRob Barnes
Adding EC_HOST_EVENT_PANIC to SCI mask allows the EC to interrupt the Kernel when an EC panic occurs. If system safe mode is also enabled on the EC, the kernel will have a short period to extract and save info about the EC panic. BUG=b:268342532 BRANCH=firmware-octopus-11297.B TEST=Observe kernel ec panic handler run when ec panics Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I37e566e459f39f8bc2dafc3c3915260259730ca6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74622 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-22mb/google/dedede/var/boxy: Generate SPD ID for supported memory partkevin3.yang
Add boxy supported memory parts in mem_parts_used.txt, generate SPD id for this part. 1. Samsung K4U6E3S4AB-MGCL 2. Hynix H54G46CYRBX267 3. Micron MT53E512M32D1NP-046 WT:B BUG=b:278983561 TEST=Use part_id_gen to generate related settings Signed-off-by: kevin3.yang <kevin3.yang@lcfc.corp-partner.google.com> Change-Id: I317f2b31774627706babdea10776af05ab692d1e Reviewed-on: https://review.coreboot.org/c/coreboot/+/74586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-04-22mb/google/nissa/var/yavilla: Generate SPD ID to aligen with yaviksTony Huang
Yavilla board memory id setting references to yaviks. This CL aligen it with yaviks. DRAM Part Name ID to assign MT62F512M32D2DR-031 WT:B 0 (0000) MT62F1G32D4DR-031 WT:B 1 (0001) H9JCNNNBK3MLYR-N6E 0 (0000) H58G56AK6BX069 2 (0010) K3LKBKB0BM-MGCP 2 (0010) H58G56BK7BX068 3 (0011) MT62F1G32D2DS-026 WT:B 3 (0011) K3KL8L80CM-MGCT 3 (0011) H58G66BK7BX067 4 (0100) MT62F2G32D4DS-026 WT:B 4 (0100) K3KL9L90CM-MGCT 4 (0100) H58G66AK6BX070 5 (0101) BUG=b:273791621 BRANCH=firmware-nissa-15217.B TEST=run part_id_gen to generate SPD id Change-Id: I4a5eb9e6e87a4adbc23f94f0eb92d5452c50e47c Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74584 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-22mb/google/brya/variants/hades: Swap LAN and SD Card PCIE PortsTarun Tuli
To aid in layout, the PCI ports for LAN and SD card were swapped. SD Card is now on RP3 (clksrc 4) LAN is now on RP8 (clksrc 3) BUG=b:269371363 TEST=builds Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: If59849c13e4c42f00e3571c0385994ade5931adb Reviewed-on: https://review.coreboot.org/c/coreboot/+/74630 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-22soc/intel/meteoerlake: set power limits dynamicallySumeet R Pawnikar
Set power limit values dynamically based on Meteor Lake CPU TDP and PCI ID of SKU. BRANCH=None BUG=b:270664854 TEST=Built and verified power limit values for 15W SKU on Rex board Change-Id: I20c9bc21dfa79696b07c460dbcedb4fa51838bdb Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-22mb/google/brya/var/marasov: Disable USB2 PHY SUS well power gatingFrank Chu
The patch disables PCH USB2 PHY power gating to prevent possible display flicker issue. Please refer Intel doc#723158 for more information. BUG=b:279117758 BRANCH=firmware-brya-14505.B TEST=Verify the build for marasov board Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: I5a5199be768fc59e2f053f8c50a49247145e7e72 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74627 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-22mb/google/corsola: Rename common config from `STARMIE` to `STARYU`Ruihai Zhou
The STARYU is the mt8186 detachable reference design, and the STARMIE is a variant of STARYU. Let's rename the common config from STARMIE to STARYU, and we can select the STARYU config for the follow up mt8186 detachable variant. BRANCH=corsola BUG=b:275470328 TEST=./utils/abuild/abuild -t google/corsola -a Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Change-Id: If75e94e86420b0a216fe7a1a9dee9cb42bbd985c Reviewed-on: https://review.coreboot.org/c/coreboot/+/74654 Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2023-04-22samsung/lumpy: Use APMC definesKyösti Mälkki
Change-Id: I658596da1d84b486126d751b6066c3efd3f65290 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74523 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-22lib/version: Move board identification stringsKyösti Mälkki
These strings are now only expanded in lib/identity.c. This improves ccache hit rates slightly, as one built object file lib/version.o is used for all variants of a board. Also one built object file lib/identity.o can become a ccache hit for successive builds of a variant, while the commit hash changes. Change-Id: Ia7d5454d95c8698ab1c1744e63ea4c04d615bb3b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-22soc/amd/phoenix/xhci: add SCI sources for the two USB4 controllersFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I95916e409b3fbd4941a861054733a34100244da9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-04-22soc/amd/*/include/pci_devs: fix copy-paste error in PCIE_ABC_C_DEVFNFelix Held
Since it's an internal bus, it's PCIE_ABC_C_DEVFN and not PCIE_GPP_C_DEVFN. This also makes it consistent with the rest of the internal PCI buses. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ica8b666161c3cd3b0b4a29f8a4b0aff473b4d833 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-04-22soc/amd/phoenix/include/soc/smi: add missing SCI map defines 61-63Felix Held
In the PPRs #57019 Rev 3.03 and #57396 Rev 3.04, SMITYPE_XHC3_PME, SMITYPE_XHC4_PME and SMITYPE_CUR_TEMP_STATUS_5 are defined, so add those defines. When doing the initial update for Phoenix, at least XHC3 and XHC4 PME events were missing from the PPR. Those two are the PME events of the two USB4 controllers. SMITYPE_XHC2_PME doesn't exist on this SoC. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic6fff9175b73cc9d0fd324d4a568a5761b92d078 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-04-22cpu/amd/pi/00730F01: rename fixme.c to cpu_io_init.cFelix Held
Now that the code is in a much better shape and uses native coreboot functionality to perform the initialization, rename the file from fixme.c to cpu_io_init.c to be more descriptive of what it does. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I97d1ac2b12c624210c570f189f825409bd64f318 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74659 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-04-22soc/intel/cmn/cse: Make `cse_get_fpt_partition_info()` function staticSubrata Banik
The patch makes `cse_get_fpt_partition_info()` AP local/static as all the references to this function are in local to the cse_lite.c file. BUG=b:273661726 TEST=Able to build and boot google/marasov with this code change. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ie50453946c8abe55c29e9001263f0264a73c8fac Reviewed-on: https://review.coreboot.org/c/coreboot/+/74388 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-04-22mb/google/brya: Enable CSE FPT Info config for NissaSubrata Banik
Google Brya variants like Nissa family selects `SOC_INTEL_STORE_CSE_FPT_PARTITION_VERSION` to store CSE FPT information. BUG=b:273661726 TEST=Able to build and boot google/marasov. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I234b5d272077de9a6f0a9ba69fa015cda7ebd56c Reviewed-on: https://review.coreboot.org/c/coreboot/+/74387 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-04-22soc/intel/alderlake: Implement `soc_is_ish_partition_enabled` overrideSubrata Banik
This patch implements `soc_is_ish_partition_enabled()` override to uniquely identify the SKU type between UFS and non-UFS to conclude if ISH partition is enabled and need to retrieve the ISH version from CSE FPT by sending HECI command. TEST=Able to uniquely identify the UFS and non-UFS SKUs while booting to google/marasov. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I7771aebb988f11d9d1b2824aa28e6f294fd67c25 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74532 Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-22mb/google/rex: Enable asynchronous End-Of-PostSubrata Banik
Set the `SOC_INTEL_CSE_SEND_EOP_ASYNC' flag to request End-Of-Post right after PCI enumeration and handle the command response at `BS_PAYLOAD_BOOT'. With these settings we have observed a boot time reduction of about 100ms on google/rex. TEST=Tests on google/rex with `SOC_INTEL_CSE_SEND_EOP_ASYNC' show End-Of-Post after PCI initialization and EOP message received at `BS_PAYLOAD_BOOT'. Change-Id: I27b540eeddcada521eba91fcc51504831d6dc855 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-04-21mb/google/myst: Expose SKU and board ID to Chrome OSJon Murphy
Select EC_GOOGLE_CHROMEEC_SKUID and EC_GOOGLE_CHROMEEC_BOARDID to provide common routine for reading skudid and boardid from Chrome EC. BUG=b:277293398 TEST=builds Change-Id: I8e42ba23dada9771f335df34275e44e51d645596 Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74283 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-21soc/intel/meteorlake: Don't offer D3Cold when it's disabledSean Rhodes
Use D3COLD_SUPPORT Kconfig option to adjust the maximum supported sleep state in ACPI. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ifa55a19727e6adb6864158c2c323d08a0c22b996 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2023-04-21arch/riscv/trap_handler.c: Use new names for CSRArthur Heymans
sbadaddr and mbadaddr are deprecated names. This fixes compilation with clang. Change-Id: I5c8fa82b6131dec10f55e8ebcf36b34e30b57bad Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-04-21arch/riscv: Fix compiler argument for clangArthur Heymans
The suffixes zicsr and zifencei are assumed by default for clang. Change-Id: I75947f614c3600d5d9d461970159f0787fd6c3de Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-04-21mb/intel/mtlrvp: Enable RTD3 root port mutex for WWANCliff Huang
This adds RTD3 RPMX mutex to the root port. It is shared between RTD3 and WWAN. The purpose of using this mutex is to prevent OSPM from calling _ON and _OFF methods while WWAN kernel driver is calling _RST, which accesses the GPIO pins. BUG=NA TEST=boot to OS and check the generated SSDT table for the root port. The RPMX mutex should be generated under the root port. Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: I5b53765453bac0fc96e9651ab347069c7c8bf058 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73384 Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-21mb/intel/adlrvp: Enable RTD3 root port mutex for WWANCliff Huang
This adds RTD3 RPMX mutex to the root port. It is shared between RTD3 and WWAN. The purpose of using this mutex is to prevent OSPM from calling _ON and _OFF methods while WWAN kernel driver is calling _RST, which accesses the GPIO pins. BUG=NA BRANCH=firmware-brya-14505.B TEST=boot to OS and check the generated SSDT table for the root port. The RPMX mutex should be generated under the root port. Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: I809eb84cb1a09deb168040e83041b65237a1b576 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73383 Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2023-04-21mb/google/brya: Enable RTD3 root port mutex for WWANCliff Huang
This adds RTD3 RPMX mutex to the root port. It is shared between RTD3 and WWAN. BRANCH=firmware-brya-14505.B TEST=boot to OS and check the generated SSDT table for the root port. The RPMX mutex should be generated under the root port. Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: Ia87b5f9d8300d6263c84a586256424799d3a45b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73382 Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-21Documentation/measured_boot.md: document new TPM optionsSergii Dmytruk
Change-Id: I6dae8e95c59b440c75e13473eefc4c2cf4fd369b Ticket: https://ticket.coreboot.org/issues/426 Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2023-04-21Documentation/measured_boot.md: fix SRTM/DRTM explanationsSergii Dmytruk
Change-Id: If224dc0cf3c0515dbd18daca544c22275e96b459 Ticket: https://ticket.coreboot.org/issues/426 Co-authored-by: Daniel P. Smith <dpsmith@apertussolutions.com> Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-21drivers/intel/ish: Hook get ISH version into `.final`Subrata Banik
This patch creates .final hook to call into get ISH version function if platform has required config (`SOC_INTEL_STORE_CSE_FPT_PARTITION_VERSION`) support. BUG=b:273661726 TEST=The ISHC version, 5.4.2.7779, was retrieved on the google/nivviks. Signed-off-by: Dinesh Gehlot <digehlot@google.com> Change-Id: Ib3f983d5de5b169474bcdb1e9e2934174a9dadf8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74209 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-21soc/intel/cmn/cse: Store ISH firmware version into CBMEMSubrata Banik
The patch stores the ISH in the CBMEM table. It verifies CSE has been updated by comparing previous and current CSE versions. If it has, the patch updates the previous CSE version with the current CSE version. It then updates the CBMEM table with the current ISH version. BUG=b:273661726 TEST=The current and old CSE and ISH versions are verified on the google/nissa during cold and warm reboots. Additionally, version updates are verified by a debug patch that purposely updated the stored cse version. Signed-off-by: Dinesh Gehlot <digehlot@google.com> Change-Id: Ie5c5faf926c75b05d189fb1118020fff024fc3e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2023-04-21{commonlib, soc/intel/cmn/cse}: Store CSE firmware version into CBMEMSubrata Banik
The patch implements an API that stores the CSE firmware version in the CBMEM table. The API will be called from RAMSTAGE based on boot state machine BS_PRE_DEVICE/BS_ON_EXIT Additionally, renamed ramstage_cse_fw_sync() to ramstage_cse_misc_ops() in order to add more CSE related operations at ramstage. This patch also adds a configuration option, 'SOC_INTEL_STORE_CSE_FPT_PARTITION_VERSION', which enables the storage of firmware version information in CBMEM memory. This information can be used to identify the firmware version that is currently installed on the system. The option depends on the `DRIVERS_INTEL_ISH` config and platform should be flexible enough to opt out from enabling this feature. The cost of sending HECI command to read the CSE FPT is significant (~200ms) hence, the idea is to read the CSE RW version on every cold reset (to cover the CSE update scenarios) and store into CBMEM to avoid the cost of resending the HECI command in all consecutive warm boots. Later boot stages can just read the CBMEM ID to retrieve the ISH version if required. Finally, ensure this feature is platform specific hence, getting enabled for the platform that would like to store the ISH version into the CBMEM and parse to perform some additional work. BUG=b:273661726 TEST=Able to build and boot google/marasov. Signed-off-by: Dinesh Gehlot <digehlot@google.com> Change-Id: I923049d2f1f589f87e1a29e1ac94af7f5fccc2c8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74256 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-04-21mb/google/myst: Enable mp2 deviceJon Murphy
The mp2 PCI device is still present when no mp2 firmware is loaded. When this device isn't explicitly enabled in the mainboard's devicetree, the chipset devicetree default of the device being disabled is used. This results in coreboot's resource allocator not allocating resources to the device and since the bridge doesn't have enough MMIO space reserved, the Linux kernel can't assign resources to it. Enable the mp2 device in the mainboard's devicetree so that it gets its resources assigned by coreboot. BUG=b:277217097 TEST=builds Change-Id: I21885c51ff08846b456675090946f381843ef5e6 Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74277 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-21mb/google/myst: Enable audio co-processor in devicetreeJon Murphy
Enable the audio co-processor in the device tree. BUG=b:277214614 TEST=builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I1e1749359804960bbd75d869385b9071e7f33be7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74276 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-21mb/google/skyrim/var/markarth: Change to read the eMMC clkreq insteadJohn Su
Because WD SSD drive isn't holding the clock low for some reason. So we change to read eMMC clkreq signal instead. BRANCH=none BUG=b:278495684 TEST=emerge-skyrim coreboot chromeos-bootimage and verify ok. Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I3a9225473a6ae1ba01dc8e5d982c4999f073267e Reviewed-on: https://review.coreboot.org/c/coreboot/+/74583 Reviewed-by: Chao Gui <chaogui@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
2023-04-21nb/amd/pi/00730F01/northbridge: remove unneeded AGESA.h includeFelix Held
TEST=Timeless build for pcengines/apu2 results in identical image. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If95eb9e5135de2b256d1f584afcedfd6e0cf8d8e Reviewed-on: https://review.coreboot.org/c/coreboot/+/74618 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-04-21cpu/amd/pi/00730F01/fixme: replace some magic numbersFelix Held
TEST=Timeless build for pcengines/apu2 results in identical image. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If96f4655a3b4dc621ef77c4d97d2927565d634ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/74617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-21cpu/amd/pi/00730F01/fixme: use coreboot's PCI access functionsFelix Held
Use coreboot's native PCI access functions instead of using the vendorcode's PCI access functions to set up the CPU IO routing in function 1 of the HT PCI device. This file still has room for improvement, but at least it's now using coreboot-native functionality. Stoneyridge has a nicer implementation, but looking into possibly unifying those is out of scope for this patch. TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ieecc0e5f6576a838d79220b061de81e21b5d976c Reviewed-on: https://review.coreboot.org/c/coreboot/+/74616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-21soc/amd/phoenix: Mark PCIe GPP bridges as hidden instead of offMartin Roth
When one of the General-Purpose PCIe bridges is not used, it doesn't show up on the PCI bus at all, so coreboot notes it as an issue in the devicetree. This happens even if the device is marked as off. To solve this, we're marking the GPP bridge devices in devicetree as hidden, so they'll only show up in devicetree if they're actually used on a mainboard. BUG=b:277997811 TEST=Build Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I7b7577baa2dbb0ea7ebbcdb1a8ae81770e61d76f Reviewed-on: https://review.coreboot.org/c/coreboot/+/74527 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-21soc/amd/mendocino: Mark PCIe GPP bridges as hidden instead of offMartin Roth
When one of the General-Purpose PCIe bridges is not used, it doesn't show up on the PCI bus at all, so coreboot notes it as an issue in the devicetree. This happens even if the device is marked as off. To solve this, we're marking the GPP bridge devices in devicetree as hidden, so they'll only show up in devicetree if they're actually used on a mainboard. BUG=None TEST=Don't see the "PCI: Leftover static devices:" warning for these in the boot console. BRANCH=skyrim Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I517776e4dedc70e957a0c836ab3c2e5d49e156d2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74526 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-21soc/intel/meteorlake: Add VPU into the DMAR SATC tablezhaojohn
This change adds the VPU into the DMAR SATC table in order to support the VPU IO virtualization. BUG=None TEST=Enabled the VPU, booted to kernel and verified that DMAR SATC table includeded the VPU entry. Change-Id: I6d4af7c9844e33483a1e616eaee061a90d0be6fc Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-04-21soc/intel/(adl, cmn, mtl): Refactor cse_fw_sync() functionSubrata Banik
This patch refactors cse_fw_sync() function to include timestamp associated with the CSE sync operation.This effort will ensure the SoC code just makes a call into the cse_fw_sync() without bothering about adding timestamp entries. TEST=Able to build and boot google/marasov. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ib5e8fc2b8c3b605103f7b1238df5a8405e363f83 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2023-04-21soc/intel/cmn/cse: Refactor ramstage_cse_fw_sync() functionSubrata Banik
This patch refactors sleep type check inside ramstage_cse_fw_sync() to avoid additional logic while performing cse_fw_sync() operation. TEST=Able to build and boot google/marasov. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I7c7a91c81d51dbf6742e12c58a24b9f52fff5630 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2023-04-21util/inteltool: Add support for Jasper LakeKarol Zmyslowski
Tested on: Intel N5105 (Jasperlake Family, Intel Celeron processor) Based on Intel Pentium Silver and Intel Celeron Processor Datasheet, vol. 2 of 2 revision 001 (DOC# 634545) Change-Id: If4134bd03f5544b5845cde998ee526e5ddd5b51d Signed-off-by: Karol Zmyslowski <karol.zmyslowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73934 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2023-04-21mb/google/volteer/var/delbin: Add new memory supportFrank Chu
Add the new memory support: Samsung K4UBE3D4AB-MGCL BUG=b:274373361 BRANCH=firmware-volteer-13672.B TEST=FW_NAME=delbin emerge-volteer coreboot Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: Ie88c25b4b0f88ed299711f2b6b94006d5301554c Reviewed-on: https://review.coreboot.org/c/coreboot/+/74556 Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-21soc/amd/common/cpu/noncar/early_cache: use get_top_of_mem_below_4gbFelix Held
Use get_top_of_mem_below_4gb instead of open-coding the functionality. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Icc9e5ad8954c6203fc4762aa976bba7e8ea16159 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74615 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2023-04-21soc/amd/stoneyridge/memmap: use get_top_of_mem_below_4gbFelix Held
Use get_top_of_mem_below_4gb instead of open-coding the functionality. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic673deb725a541c7535ae769f589cd82ea42a561 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74614 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-21soc/amd/stoneyridge/northbridge: use get_top_of_mem_[below,above]_4gbFelix Held
Use get_top_of_mem_below_4gb and get_top_of_mem_above_4g instead of open-coding the functionality. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I04f2a3744aee9beedaa97b154a652ce6f0c705c0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-21soc/amd/common/block/acpi/tables: use get_top_of_mem_[below,above]_4gbFelix Held
Use get_top_of_mem_below_4gb and get_top_of_mem_above_4g instead of open-coding the functionality. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I35895340f6e747e2f5e1669d40f40b201d8c1845 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-21Drop unused include <version.h>Kyösti Mälkki
Change-Id: I7d0718b5d2e0dd16eb90f63dd9d33329a2d808ba Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-21soc/intel/braswell: Replace <build.h> with <version.h>Kyösti Mälkki
To use generated build.h one should have had a pre-requisite in the Makefile. Reference coreboot_build_date from lib/version.c instead. Change-Id: Icd6fa2ddf8aa584b0f51ba130592f227bbdad975 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-21drivers/ipmi: Replace <build.h> with <version.h>Kyösti Mälkki
To use generated build.h one should have had a pre-requisite in the Makefile. Reference coreboot_version from lib/version.c instead. Change-Id: I7f10acabf1838deb90fde8215a32718028096852 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-21nb/amd/pi/00730F01/northbridge: use get_top_of_mem_[below,above]_4gbFelix Held
Use get_top_of_mem_below_4gb and get_top_of_mem_above_4g instead of open-coding the functionality. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6332b051acf8d00ba6528360b18ea0d3c4dc30fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/74611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-21include/cpu/amd/mtrr: return uint32_t from get_top_of_mem_below_4gbFelix Held
The top of memory below 4GB will always fit into 32 bits, so change the return type accordingly. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6b463a17f2db3b7a99ff3572f318c9c22aac7431 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-21include/cpu/amd/mtrr: rename functions to get top of memory regionsFelix Held
Rename amd_topmem and amd_topmem2 to get_top_of_mem_below_4gb and get_top_of_mem_above_4g to make it clearer what those functions return. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic6e98d94c731af74aea0ce276a9a7e4867e3986f Reviewed-on: https://review.coreboot.org/c/coreboot/+/74589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-04-21soc/amd/phoenix: Update XHCI eventsJon Murphy
Set up SoC-specific XHCI defines and enable SOC_AMD_COMMON_BLOCK_XHCI to allow for XHCI events to be logged. BUG=b:277273428 TEST=builds Change-Id: I3ca4f84fb0f1fef8441ab6ef7b6f6348c52b2922 Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74280 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-21mb/google/myst: Enable AP <-> GSC communicationJon Murphy
Configure GSC I2C and Interrupt GPIOs during the early initialization. Add devicetree configuration for GSC device and enable the required config items. BUG=b:275959717 TEST=builds Change-Id: I6e235356b252a7b68a42da128ffd3189a829f117 Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74111 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-21aopen/dxplplusu: Drop ACPI C-states supportKyösti Mälkki
C0 clock throttling was disabled, no need to add _PTC. C2/C3 latency values were copy-paste from different CPUs. TBD: Check IO-trap Change-Id: Ia0e35e28f0df8b0f8fc58f70c7d792487ee4f7f3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74439 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2023-04-21ACPI: Obsolete FADT duty_offset and duty_width fieldsKyösti Mälkki
After the obsoletion of Processor() it is necessary to provide _PTC package to define P_CNT IO address for clock throttling. The platforms touched here already emit empty _PTC to disable clock throttling. Change-Id: I0e84c8ccd2772c9b3d61f71b74324c8d28f4eefe Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74438 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-21ACPI: Obsolete FADT p_lvl2_lat and p_lvl3_lat fieldsKyösti Mälkki
After the obsoletion of Processor() it is necessary to provide _CST package to define P_LVLx IO addresses for C2/C3 transitions. The latency values from _CST will always replace those in FADT. Change-Id: I3230be719659fe9cdf9ed6ae73bc91b05093ab97 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-21soc/amd/phoenix/xhci: Correct counting of xhci_sci_sourcesFred Reitberger
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: Iabba97e003d1a5140c98e3fc5a3496f66f8795c2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74528 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-21mb/google/brya/var/marasov: Add _DSD object for wifiFrank Chu
`is_untrusted` is eventually ended up by adding DMA property _DSD which is similar to what `add_acpi_dma_property` does for WWAN drivers, hence it makes sense to have a unified name across different device drivers. BUG=b:278310435 BRANCH=firmware-brya-14505.B TEST=Verified that the _DSD object is still present in the SSDT. Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: I5a69a47e67f6acaad5a5d1b67e437c5a41bebf3e Reviewed-on: https://review.coreboot.org/c/coreboot/+/74499 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-21mb/google/dedede: Create boxy variantkevin3.yang
Create the boxy variant of the waddledee reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:277529068 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_BOXY Change-ID: Ief22eb000421c23abf6de3f99eb860bdae1e7919 Signed-off-by: kevin3.yang <kevin3.yang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-20Documentation/mainboard: Add missing Asus toctree referencesNicholas Chin
The new pages for the P8Z77-M, P2B-LS, and P3B-F were missing from index.md, causing Sphinx to output "document isn't included in any toctree" warnings. Change-Id: I7883d48bfbe6bff5595aa9303f9d6f4a55eadc9c Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74189 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-04-20soc/intel/common/block/pcie/rtd3: Fix source clock check condition for PM methodCliff Huang
srcclk_pin is 0-based and '0' is a valid clock source number. If srcclk_pin is set to -1, then the clock will not be disabled in D3. Therefore, clock source gating method should not be generated. BUG=b:271003060 BRANCH=firmware-brya-14505.B TEST=Boot to OS and check that rtd3 ACPI entries are generated as expected. For those PCI devices with RTD3 driver whose srcclk_pin to 0, the RTD3 entries should not be missing due to check error. Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: Ia831b8fd17572cc35765bd226d1db470f12ddd41 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73889 Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2023-04-20soc/intel/meteorlake: Send CSE EOP Async CMD earlySubrata Banik
This patch sends the CSE EOP command asynchronous implementation early as part of `soc_init_pre_device`. Without this patch the duration between asynchronous CSE EOP send and receive commands is not ample which causes idle delay while waiting for EOP response. The goal of the CSE async implementation is to avoid idle delay while capturing the response from CSE EOP cmd. This patch helps to create ample duration between CSE EOP command being sent and response being captured. TEST=Able to boot google/rex sku to ChromeOS and observed ~100ms of boot time savings (across warm and cold reset scenarios) Change-Id: I91ed38edbd5a31d61d4888e1466169a3494d635a Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-04-20mb/google/myst: Add eSPI configurationJon Murphy
Add eSPI configuration for myst. Ensure the additional windows are used and remove unnecessary addresses from the range used on skyrim. BUG=b:275953893 TEST=builds Change-Id: I7b40adec78d4e0b596596fa6e2951c79bd3bd8c7 Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74110 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-20soc/amd/phoenix/include/soc/pci_devs: update defines to match the PPRFelix Held
Parts of this file were still a copy of the file from the Mendocino SoC, so update the file to match the PPR #57019 Rev 3.03 and the chipset devicetree of the Phoenix SoC. Phoenix has 4 GFX/GPP PCIe bridges/ports, the numbering scheme of the GPP PCIe bridges/ports was changed so that the numbers match the device and function numbers, and there are new device functions for the IPU and the USB4 controller and router devices. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie9429c03839bb0199a04cd6cafe9a955ebdacc91 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74565 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-20soc/amd/phoenix/devicetree: drop i2s_ac97 deviceFelix Held
In both PPR #57019 Rev 3.03 and PPR #57396 Rev 3.04, the i2s_ac97 function on bus C isn't mentioned any more and the microarchitecture specification document for this SoC also doesn't mention it, so remove it from the devicetree. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibd115953bdd60e1dfcc79797b0c2158e5d861636 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74564 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-20soc/amd/stoneyridge/northbridge: fix indentation in set_mmio_addr_regFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5e067f6fb2bab66d9b2f6965636845dfd8b7cacd Reviewed-on: https://review.coreboot.org/c/coreboot/+/74567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-04-20soc/intel/meteorlake: Replace TcssD3ColdDisable with D3COLD_SUPPORTSean Rhodes
Remove the `TcssD3ColdDisable` option in devicetree, as it exists in Kconfig. The setting is currently unused. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I08930ef84438140a13df74900570b126088bd1cb Reviewed-on: https://review.coreboot.org/c/coreboot/+/74478 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-20soc/intel/alderlake: Replace TcssD3ColdDisable with D3COLD_SUPPORTSean Rhodes
Remove the `TcssD3ColdDisable` option in devicetree, as it exists in Kconfig. The setting is currently unused. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I2590e8dec0a308e0dc3d467cb3dd2bb97e877492 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74477 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-20soc/intel/tigerlake: Replace TcssD3ColdDisable with D3COLD_SUPPORTSean Rhodes
Remove the `TcssD3ColdDisable` option in devicetree, as it exists in Kconfig. The setting is only used on `starlabs/starbook` which selects D3COLD_SUPPORT so the UPDs will not change. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I50e49e900c96748edd5b678765e47cc0e0d9b280 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74476 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-20soc/intel/common/rtd3: Use D3COLD_SUPPORT to set max sleep stateSean Rhodes
Use D3COLD_SUPPORT Kconfig option to set the maximum support sleep state. Report `4` in `_S0W` only when D3COLD_SUPPORT is enabled, as if it is not, it will break S3 exit. When D3COLD_SUPPORT is not enabled, return `3` (D3Hot). This fixed S3 exit on both TGL and ADL. Tested on StarBook Mk V and Mk VI. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I578d4933b6144aec79fe0b2eb168338ef82c0b9d Reviewed-on: https://review.coreboot.org/c/coreboot/+/74406 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2023-04-20soc/intel/tigerlake: Replace SOC_INTEL_TIGERLAKE_S3 with D3COLD_SUPPORTSean Rhodes
The Kconfig option SOC_INTEL_TIGERLAKE_S3 suggests that it's doing something with S3, but it's actually disabling D3Cold support. Remove it, and instead use D3COLD_SUPPORT so it's clear what the option is doing. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Id43f3e5c8620d474831cc02fcecebd8aac961687 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74405 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-20device: Move D3COLD_SUPPORT symbolSean Rhodes
Move D3COLD_SUPPORT to device, so it can be used by multiple SOCs. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ie92736458ab95374c51346107665dc0fd1e653a4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74404 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-20mb/amd/birman: Enable PCIe RTD3 supportFred Reitberger
Add PCIe RTD3 support so the NVMe gets placed into D3 when entering s0i3 Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I5eac65125c11dd04c5dbb5996c947ad734acdae3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74247 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-20mb/amd/birman: Update DXIO descriptors per schematicFred Reitberger
Update DXIO descriptors for birman-phoenix per schematic 105-D67000-00B v0.7 Update devicetree to reference the updated DXIO descriptors. TEST=boot birman and note the devices show up in the logs correctly Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I76cf6715b60a1857bf58349d70a623bf043594fe Reviewed-on: https://review.coreboot.org/c/coreboot/+/69705 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-04-20soc/intel/meteorlake: Drop FSP CPU feature programming for ChromeOSSubrata Banik
The Intel FSP used on ChromeOS platform has dropped the `CpuFeaturesPei.ffs` module to opt for coreboot running this additional feature programming on BSP and APs. TEST=Able to build and boot google/rex without any boot regression. Please refer to the boot time and SPI flash savings after dropping the FSP feature programming: Boot time savings=10ms SPI Flash size savings=34KB Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Iaed0a009813098610190b2a3a985b0748c0d51de Reviewed-on: https://review.coreboot.org/c/coreboot/+/74168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-04-19mb/amd/birman/ec.c: Update EC configurationFred Reitberger
Update the EC GPIO values for Birman, per schematic # 105-D67000-00B Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: Icd9df120f555eb06f920f6263a8d2ab45c05baec Reviewed-on: https://review.coreboot.org/c/coreboot/+/73971 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-19mb/google/myst: Add initial fch irq routingJon Murphy
Add initial fch irq routing table for Myst. BUG=b:275946702 TEST=builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: Ic81c3cbfbb30a0beb3c4083624cf19abe6d1e694 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74109 Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-19soc/amd/common/block/lpc/spi_dma: Leverage CBFS_CACHE when using SPI DMAKarthikeyan Ramasubramanian
CBFS library performs memory mapped access of the files during loading, verification and de-compression. Even with MTRRs configured correctly, first few file access through memory map are taking longer times to load. Update the SPI DMA driver to load the files into CBFS cache, so that they can be verified and de-compressed with less overhead. This saves ~60 ms in boot time. BUG=None TEST=Build Skyrim BIOS image and boot to OS. Observe ~60 ms improvement with the boot time. Performing additional test to confirm there are no regressions. Before: ======= 970:loading FSP-M 15:starting LZMA decompress (ignore for x86) 760,906 (60,035) 16:finished LZMA decompress (ignore for x86) 798,787 (37,881) 8:starting to load ramstage 17:starting LZ4 decompress (ignore for x86) 1,050,093 (13,790) 18:finished LZ4 decompress (ignore for x86) 1,054,086 (3,993) 971:loading FSP-S 17:starting LZ4 decompress (ignore for x86) 1,067,778 (3,313) 18:finished LZ4 decompress (ignore for x86) 1,068,022 (244) 90:starting to load payload 17:starting LZ4 decompress (ignore for x86) 1,302,155 (11,285) 18:finished LZ4 decompress (ignore for x86) 1,303,938 (1,783) After: ====== 970:loading FSP-M 15:starting LZMA decompress (ignore for x86) 709,542 (12,178) 16:finished LZMA decompress (ignore for x86) 739,379 (29,837) 8:starting to load ramstage 17:starting LZ4 decompress (ignore for x86) 1,001,316 (12,368) 18:finished LZ4 decompress (ignore for x86) 1,001,971 (655) 971:loading FSP-S 17:starting LZ4 decompress (ignore for x86) 1,016,514 (3,031) 18:finished LZ4 decompress (ignore for x86) 1,016,722 (207) 90:starting to load payload 17:starting LZ4 decompress (ignore for x86) 1,244,602 (10,313) 18:finished LZ4 decompress (ignore for x86) 1,244,831 (228) Change-Id: Ie30b6324f9977261c60e55ed509e979ef290f1f1 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2023-04-19mb/google/skyrim: Fix eMMC reset GPIOJon Murphy
On Skyrim variants, the eMMC reset GPIO should be SSD_AUX_RST_L (GPIO6). Update the port_descriptors to link the correct reset GPIO. Data is from the skyrim variant schematics and go/skyrim-gpios. BUG=b:278759559 TEST=reboot: 5 iterations suspend_stress_test: 10 iterations Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I4713b3af23bb7684c9e2e81cf9c8d8a560b41a79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74512 Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2023-04-19mb/google/brya/var/crota: select SOC_INTEL_RAPTORLAKETerry Chen
Select SOC_INTEL_RAPTORLAKE to force coreboot to use the RPL FSP headers for FSP as crota is using a converged firmware image. BUG=b:267249674 BRANCH=firmware-brya-14505.B TEST="FW_NAME=crota emerge-brya coreboot-private-files-baseboard-brya coreboot chromeos-bootimage" Cq-Depend: chromium:4430832 Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com> Change-Id: I448c58f93fddc44904c1f5ef3f8939618eff536f Reviewed-on: https://review.coreboot.org/c/coreboot/+/74494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-04-19mb/google/kukui: Add sdram configs for RAM code 0x33 and 0x34Sheng-Liang Pan
Add sdram configs: - RAM code 0x33: sdram-lpddr4x-K4UBE3D4AA-MGCL-4GB SPD for K4UBE3D4AB-MGCL 4GB - RAM code 0x34: sdram-lpddr4x-H9HCNNNFAMMLXR-NEE-8GB for H54G68CYRBX248 8GB BUG=b:278644249 BRANCH=kukui TEST=emerge-jacuzzi coreboot Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: If5b484b5324ba39dbb220f12bdb8344ecb5c4da5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73469 Reviewed-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-19soc/intel/alderlake: Rename SOC_INTEL_ALDERLAKE_S3 to D3COLD_SUPPORTSean Rhodes
The Kconfig option SOC_INTEL_ALDERLAKE_S3 suggests that it's doing something with S3, but it's actually disabling D3Cold support. Rename it to D3COLD_SUPPORT to make it clear what it's doing. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ifc3f19912ac7ee55be8ec7a491598140f9532675 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2023-04-19mb/google/brya/var/constitution: Generate SPD ID for supported partsMorris Hsu
Add supported memory part in mem_parts_used.txt, then generate. K4UBE3D4AB-MGCL BUG=b:267539938 TEST=run part_id_gen to generate SPD id Change-Id: Iee41bb4511f2d77e5ddc2798f9d4db6137ed818d Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74497 Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-18mb/amd/mayan: Correct PCIe bridge for M.2 NVMe SSD0Anand Vaikar
The M.2 NVMe SSD0 device is behind AMD PCIe bridge 0.2.4 (BDF), hence update the correct bridge number in the device tree. TEST: Builds and boots, the device enumerates. [DEBUG] PCI: 00:02.4 [1022/14ee] enabled [DEBUG] PCI: 01:00.0 [144d/a80a] enabled Signed-off-by: Anand Vaikar <a.vaikar2021@gmail.com> Change-Id: I43096beda0405bd392574319d50e7cd6a7f8d291 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-04-18src/cpu/power9: move part of scom.h to scom.cSergii Dmytruk
Reset function, constants and include are not used outside of scom.c and not going to be. Change-Id: Iff4e98ae52c7099954f0c20fcb639eb87af15534 Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
2023-04-18mb/google/brya/var/omnigul: Adjust I2Cs CLK to be around 400 kHzJamie Chen
Need to tune I2C bus 0/1/3/5 clock frequency under the 400kHz for audio, TPM, touchscreen, and touchpad. Tuning i2c frequency for omnigul I2C0 - Audio CLK : 293.7khz I2C1 - TPM CLK : 388.8khz I2C3 - Touch Screen CLK : 294.8khz I2C5 - Touch Pad CLK : 389.2khz BUG=b:275061994 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot, and measure i2c clock. Change-Id: I7c4fdf0e003318a69b870b487a60accefbc0ffed Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-04-17crossgcc: Upgrade CMake from version 3.26.2 to 3.26.3Elyes Haouas
Change-Id: Iab8d67632f97c596baa9b430228d4aae6fa48126 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-04-17Makefiles: Drop redundant VARIANT_DIR definitionsKyösti Mälkki
Change-Id: Ie75ce1eee3179a623da812a6b76c7ec457684177 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-04-17mb/google/dedede/var/boten: Generate SPD ID for supported memory partkevin3.yang
Add boten supported memory parts in mem_parts_used.txt, generate SPD id for this part. 1. Samsung K4U6E3S4AB-MGCL BUG=b:278138388 TEST=Use part_id_gen to generate related settings Signed-off-by: kevin3.yang <kevin3.yang@lcfc.corp-partner.google.com> Change-Id: I5f910393847c6494f77c009cb11f50b31bebffb6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2023-04-17mb/google/rex: Enable all DDI lanesAnil Kumar
This patch enables all DDI ports on Rex board to support display port tunneling and dual display on TBT dock. BUG=b:273901499 TEST=Boot google/rex and connect two displays over a TBT dock and check the display functionality. Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: I45ee5334fbb877bd58912c8d24920037f155dc42 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74413 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-17sb/intel: Use ACPI_FADT_C2/C3_NOT_SUPPORTED definesKyösti Mälkki
Change-Id: I242e05ee63f46bedbab3a425e922e60f1c749a15 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-04-17cpu,soc/intel: Separate single SSDT CPU entryKyösti Mälkki
Change-Id: Ic75e8907de9730c6fdb06dbe799a7644fa90f904 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74399 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2023-04-17mb/google/brya/variants/hades: Update GPIO configsTarun Tuli
Update GPIO configs based on latest schematics (revision aabe36) Move GPP_D4->GPP_A13 (BT_DISABLE_L) Swap GPP_E3<>GPP_E8 (WIFI_DISABLE_L and PG_PPVAR_GPU_NVVDD_X_OD) Move GPP_A13->GPP_A20 (GSC_PCH_INT_ODL) BUG=b:269371363 TEST=builds Change-Id: I958e45156515cf4ce236084ec823f9329d7a063d Signed-off-by: Tarun Tuli <taruntuli@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73909 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-17mb/google/nissa/var/craask: Add GTCH7503 and split TS by SSFCTyler Wang
Add G2 touchscreen GTCH7503 for craaskino. Use SSFC to separate touchscreen settings. Bit 38-41 for TS_SOURCE: (1) TS_UNPROVISIONED --> 0 (2) TS_GTCH7503 --> 1 BUG=b:277979947 TEST=(1) emerge-nissa coreboot (2) Test on craaskino with G2 touchscreen (3) Test on craaskino with elan touchscreen Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: I636f21be39f26a617653e134129a11479e801ea2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-04-16mb/google/rex: Create screebo variantSimon Zhou
Create the screebo variant of the rex0 reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:276814951 BRANCH=None TEST=util/abuild/abuild -p none -t google/rex -x -a make sure the build includes GOOGLE_SCREEBO Change-Id: I8d05ca7c0fe596378ca15d0734d46ad1dc63a1f9 Signed-off-by: Simon Zhou <zhouguohui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74391 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-04-16soc/intel/jasperlake: Hook up GMA ACPI brightness controlsMatt DeVillier
Add function needed to generate ACPI backlight control SSDT, along with Kconfig values for accessing the registers. Tested by adding gfx register on google/magpie. Backlight controls work on Windows 10 and Linux 6.1. Change-Id: Iaa9872cd590c3b1298667cc80354ed3efd91c6c8 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2023-04-16util/cbfstool: Qualify struct e820entry as packedBill XIE
In order to accord with grub (see include/grub/i386/linux.h) and comments for offsets of members of struct linux_params, struct e820entry should be defined as __packed, otherwise, sizeof(struct linux_params) will become 4224 (0x1080). Fortunately, the affected area is usually not occupied. Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Change-Id: I09955c90e4eec337adca383e628a8821075381d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2023-04-15soc/intel/cmn/cse: Move API to get FW partition info into cse_lite.cSubrata Banik
The patch moves API that gets the CSE FW partition information into CSE Lite specific file aka cse_lite.c because the consumer of this API is the cse_lite specific ChromeOS devices hence, it's meaningful to move the cse lite specific implementation inside cse_lite.c file. BUG=b:273661726 TEST=Able to build and boot google/marasov with this code change. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I49ffaec467f6fb24327de3b2882e37bf31eeb7cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/74382 Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-15Update vboot submodule to upstream mainMichał Żygowski
Updating from commit id 5b8596ce: 2sha256_arm: Fix data abort issue to commit id 35f50c31: Fix build error when compiling without -DNDEBUG This brings in 41 new commits. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I58f6740c34670ea5a501ff2ee8cfcf9d2a1c25e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74401 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 06:08:54 +0000