Age | Commit message (Expand) | Author |
2010-02-03 | Supermicro H8QME-2+ (Fam10) whitespace fixes (trivial). | Uwe Hermann |
2010-02-03 | Add missing CONFIG_ prefix to make manual QEMU build work (trivial). | Uwe Hermann |
2010-02-03 | Trivial: In QEmu, the fallback image should USE_FALLBACK_IMAGE. | Patrick Georgi |
2010-02-03 | Guards against errors that are hard to track down: | Patrick Georgi |
2010-02-03 | Fix incorrect board names in Kconfig strings (trivial). | Uwe Hermann |
2010-02-03 | This patch adds the Supermicro H8QME-2+ (fam10) Motherboard with the | Knut Kujat |
2010-02-03 | The UART2 on the AMD cs5536 is incorrectly configured in two places. | Stefan Reinauer |
2010-02-01 | Alot of it is trivial clean ups and 830 is now able to initialize one row/sid... | Joseph Smith |
2010-01-31 | - Improve help texts for option ROM initialization methods | Stefan Reinauer |
2010-01-31 | compareboard: | Stefan Reinauer |
2010-01-31 | Add detection support for the Winbond W83877AF (trivial). | Uwe Hermann |
2010-01-30 | Trivial fixup on IP1000 and RM4100 copyright entries. | Joseph Smith |
2010-01-30 | These lines slipped in. Sorry for the inconvenience. | Stefan Reinauer |
2010-01-30 | ifeq wants a space before the ( | Stefan Reinauer |
2010-01-30 | add Kbuild support to abuild and enable it per default; | Stefan Reinauer |
2010-01-30 | * fix crt0s/ldscripts paths to fix out of tree build. | Stefan Reinauer |
2010-01-29 | RCA RM4100 and Thomson IP1000 auto.c rework. | Joseph Smith |
2010-01-29 | Add the BSD-licensed getopt tool to crossgcc, to use | Patrick Georgi |
2010-01-29 | Make $(obj)/build.h an explicit dependency for all | Patrick Georgi |
2010-01-28 | Fix manual build of the ASUS A8N-E (trivial). | Uwe Hermann |
2010-01-27 | reformat Kconfig file, too. | Patrick Georgi |
2010-01-27 | Add the MSR writes that are needed to provide VGA legacy routing for the Geod... | Edwin Beasant |
2010-01-27 | Change memory map of geode lx: 768kb-systop is a | Edwin Beasant |
2010-01-26 | Mark c0000-fffff as usable on geode-lx. SeaBIOS needs it. | Edwin Beasant |
2010-01-26 | use stdint types for structures, and don't use pointers | Stefan Reinauer |
2010-01-26 | - Clean up and comment writing of MSRs for cache control (Backport from v3) | Edwin Beasant |
2010-01-25 | Fix ACPI build on a couple of boards (now that it's active) | Patrick Georgi |
2010-01-25 | This code was copied from amdk8 and never really made usable. | Stefan Reinauer |
2010-01-25 | More Kconfig changes to improve match with newconfig: | Patrick Georgi |
2010-01-25 | Align several kconfig options to match newconfig: | Patrick Georgi |
2010-01-24 | Document CONFIG_PCI usage in the README (trivial). | Uwe Hermann |
2010-01-24 | Update list of superiotool contributors to r5048 (trivial). | Uwe Hermann |
2010-01-24 | Add missing files from the last commit (trivial). | Uwe Hermann |
2010-01-24 | Add VIA VT82C686A/VT82C686B detection support to superiotool. | Carl-Daniel Hailfinger |
2010-01-23 | Add detection support for the Winbond W83667HG Super I/O. | David Bartley |
2010-01-23 | Add detection support for ITE IT8510E/TE/G and IT8511E/TE/G. | Anders Juel Jensen |
2010-01-20 | These two files accidently got a wrong license header. | Stefan Reinauer |
2010-01-19 | Kontron 986LCD-M MP table: | Stefan Reinauer |
2010-01-19 | Add Yabel support (int 15 5fXX callbacks for vga bios) on the kontron 986lcd-m | Stefan Reinauer |
2010-01-19 | dev->rom_address was dropped a while ago which broke yabel. This patch fixes it | Stefan Reinauer |
2010-01-19 | drop COREBOOT_V2 and COREBOOT_V4 define. We're not sharing code with v3 | Stefan Reinauer |
2010-01-18 | Move all IOAPIC selection to southbridges, and remove them | Patrick Georgi |
2010-01-18 | run preprocessor on DSDT of D945GCLF, otherwise | Stefan Reinauer |
2010-01-18 | ncurses is only a requirement for make menuconfig, not for Kconfig in general. | Stefan Reinauer |
2010-01-18 | add ncurses to list of requirements | Stefan Reinauer |
2010-01-18 | get rid of Kconfig warning. | Stefan Reinauer |
2010-01-17 | msrtool: Fix typo | Paul Menzel |
2010-01-17 | msrtool: Read both MSR values from file in diff mode | Peter Stuge |
2010-01-17 | msrtool: Add endptr to str2msr() showing how many characters were parsed | Peter Stuge |
2010-01-17 | Add support for the Roda RK886EX a.k.a Rocky III+ ruggedised notebook | Stefan Reinauer |
2010-01-17 | Initial PCIe tuning: Enable Active State Power Management (ASPM) | Stefan Reinauer |
2010-01-17 | Add support for the Texas Instruments Cardbus+Firewire bridge TI PCI7420 | Stefan Reinauer |
2010-01-17 | Add support for Renesas M3885x Embedded Controller | Stefan Reinauer |
2010-01-17 | Add support for the SMSC LPC47n227 SuperI/O chip | Stefan Reinauer |
2010-01-17 | ICH7 update | Stefan Reinauer |
2010-01-17 | Support a few more i945 variants. With this framework in place it should | Stefan Reinauer |
2010-01-16 | msrtool: More trivial rearrangement | Peter Stuge |
2010-01-16 | coreboot has 13 instances of IOAPIC setup distributed across a lot | Stefan Reinauer |
2010-01-16 | coreboot used to have two different "APIs" for memory accesses: | Stefan Reinauer |
2010-01-16 | ectool: Support for dumping EC "index ram" | Stefan Reinauer |
2010-01-16 | msrtool: Remove indent by using continue inside for() to avoid an if block | Peter Stuge |
2010-01-16 | Update reference toolchain to | Stefan Reinauer |
2010-01-16 | Intel D945GCLF: Enable SMI and ACPI in Kconfig, too (it's enabled in newconfig) | Stefan Reinauer |
2010-01-16 | (trivial) cosmetics for i82801gx cmos failover. | Stefan Reinauer |
2010-01-16 | * drop reset files from 945 mainboards (and use southbridge specific reset) | Stefan Reinauer |
2010-01-16 | nvramtool: Consider a string with non-printable characters a "bad value". | Stefan Reinauer |
2010-01-16 | Make internal functions static in speedstep ACPI generation code. | Stefan Reinauer |
2010-01-16 | Fix stack base for Atom CPUs, the resume mechanism (cbmem etc) expects this. | Stefan Reinauer |
2010-01-16 | Micro-optimization: movl $0 --> xorl. | Stefan Reinauer |
2010-01-16 | new microcode for Intel Core 2(tm) CPUs | Stefan Reinauer |
2010-01-16 | RTC: Don't drop the alpha specific code but get it in shape for our Kconfig s... | Stefan Reinauer |
2010-01-15 | (missing svn add) | Nils Jacobs |
2010-01-15 | Support for the AMD Geode GX2 | Nils Jacobs |
2010-01-13 | indent all of nvramtool to make it fit into coreboot's | Stefan Reinauer |
2010-01-11 | Make qemu use the udelay function in src/pc80/udelay_io.c | Patrick Georgi |
2010-01-08 | - Makefile.romccboard.inc supports tinybootblock romcc boards, too. | Patrick Georgi |
2010-01-07 | Print (empty) instead of nothing at all for empty | Maciej Pijanka |
2010-01-06 | Move fam10 temp files from build/ to build/northbridge/amd/amdfam10/ Trivial. | Myles Watson |
2010-01-06 | Check for installed compilers (remove .xcompile) at make clean, not distclean. | Myles Watson |
2010-01-06 | Fix amdht on newer compilers. | Patrick Georgi |
2010-01-06 | Kconfig builds all boards now. | Patrick Georgi |
2010-01-05 | - Let AMD CAR code pick the right XIP area | Rudolf Marek |
2010-01-05 | * Explicitly add __PRE_RAM__ where it should be added. | Stefan Reinauer |
2010-01-04 | - Fix UDELAY options and HAVE_INIT_TIMER [kconfig] | Patrick Georgi |
2010-01-04 | - use LAPIC timer if selected (instead of TSC all the time) [kconfig] | Patrick Georgi |
2010-01-03 | improve debug output. | Stefan Reinauer |
2009-12-31 | romcc: | Patrick Georgi |
2009-12-28 | trival. All the changes is about comment and spaces. | Zheng Bao |
2009-12-23 | Fix technexion tim5690 build failure - REALMODE option required for x86.c mai... | Marc Jones |
2009-12-23 | newconfig compilation failed with | Stefan Reinauer |
2009-12-23 | Add mainboard x86emu interrupt function support. Add tim5690 VGA BIOS functio... | Libra Li |
2009-12-23 | Tiny Bootblock, step 1/n. | Patrick Georgi |
2009-12-21 | make strcmp happy by including string.h (trivial) | Stefan Reinauer |
2009-12-21 | Allow user to specify the size of a newly created cbfs image | Patrick Georgi |
2009-12-21 | Make coreboot load VSA from CBFS on amd/gx2. | Patrick Georgi |
2009-12-18 | Clean up amd/dbm690t and kontron/986lcd-m some more (not | Patrick Georgi |
2009-12-18 | CONFIG_K8_MEM_BANK_B_ONLY and CONFIG_PCIE_CONFIGSPACE_HOLE aren't used _anywh... | Patrick Georgi |
2009-12-18 | Filter out some more K8/Fam10 specific options on unrelated boards. | Patrick Georgi |
2009-12-18 | - speed up board comparison by only building abuild configs, not the whole | Stefan Reinauer |
2009-12-17 | Make "KBuild report" a bit happier | Stefan Reinauer |