summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-09-13mb/google/drallion: Use arcada_ish.bin for arcada_cmlSelma BENSAID
drallion_ish.bin is updated for drallion GPIO changes and not compatible with arcada_cml. TEST=Build and boot arcada_cml Signed-off-by: Selma BENSAID <selma.bensaid@intel.com> Change-Id: Idb35c33425bfd50533df74349dd645db18a65bc5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2019-09-13soc/intel/cannonlake: Allow coreboot to reserve stack for fspBora Guvendik
FSP BIOS 212 / 07.00.6C.40 for CNL/WHL supports FSP to use coreboot stack. This change selects common stack config, that enables coreboot to support share stack with FSP. TEST=Boot to OS on WHL platform Change-Id: I0778ee21cb4f66b8ec884b77788c05a73c609be6 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33746 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2019-09-13mb/google/hatch/var: Increase Goodix touchscreen reset delay to 500msPhilip Chen
Even though GT7375P programming guide rev0.4 only requires a reset delay of 120ms, in practice, we have to increase the reset delay to 500ms, or Goodix FW update would fail. This is a workaround. In the long run, we hope Goodix can fix the power sequence in touch firmware. BUG=b:138795891, b:138796844 TEST=boot helios board and verify Goodix FW update succeeded Signed-off-by: Philip Chen <philipchen@google.com> Change-Id: Ic0049bf240de0a1c7f1b1f39bf155d48bb76fb86 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35350 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-13soc/amd/picasso: Refactor AOAC enablingMarshall Dawson
Replace the raw register definitions with device numbers and macros for determining the register offsets. Rewrite the source to refer to AOAC device numbers instead of a structure. Remove the calculated offset for the console UART. Picasso's UARTs are not contiguous so handle them separately. Change-Id: Iffc87f39ebe38394a56d41bb0940e9701fd05db9 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-09-12mb/google/drallion: Update memory mapIvy Jian
This will increase ME region size and reduce the BIOS region size. BUG=b:140665483 TEST='compile successfully' Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: I5be2580d280569421d0870a06f9b93124b564b6f Reviewed-on: https://review.coreboot.org/c/coreboot/+/35304 Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-12soc/intel/cnl: Remove unnecessary FSP UPD “PchPwrOptEnable” usageSubrata Banik
PchPwrOptEnable FSP UPD is for internal testing and not really available in externally released FSP source hence assigning this UPD using devicetree config dmipwroptimize doesn't do anything. TEST=Build and boot sarien/arcada. Change-Id: I6da2a088fb697e57d12008fa18bd1764b3da7765 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2019-09-12mainboard/sifive/hifive-unleashed: Update devicetreePatrick Rudolph
With the current devicetree the kernel doesn't provide any serial after serial init. Update the devicetree to resolve this issue. Tested on HiFive Unleashed. Change-Id: I4427d34a12902e0eaa2186121a53152b719cadff Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx>
2019-09-12src/{northbridge,soc}: Remove not used #include <elog.h>Elyes HAOUAS
Change-Id: I01e1e356936b85b186d9bd5f1c1e5e3a1157a30b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33732 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: David Guckian Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-12src/vendorcode: Remove not used #include <elog.h>Elyes HAOUAS
Change-Id: Id0b9fd9cd248c83b00bc84e9d21abc6b095ecf76 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33731 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-12southbridge: Remove not used #include <elog.h>Elyes HAOUAS
Change-Id: Ifa88e3fd824ec57c21de5967e1634c8823fe0fbb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33730 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Guckian Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-12nb/intel/nehalem: Add a header for raminit_tables.cAngel Pons
This is necessary to get rid of a .c include. Also do some cosmetic fixes to a table, now that the line length limit has been raised. Change-Id: I6fd7fa5c9b21368bde8f089060733df6de34b4fd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34876 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-12src/soc/intel/common/block/cse: Make hfsts1 common & add helper functionsSridhar Siricilla
Host FW status 1 (FWSTS1/HFSTS1) register definition is common across SoCs, hence move it to common. Also add below helper function, * wait_cse_sec_override_mode() - Polls ME status for "HECI_OP_MODE_SEC_OVERRIDE". It's a special CSE mode, the mode ensures CSE does not trigger any spi cycles to CSE region. * set_host_ready() - Clears reset state from host CSR. TEST=Verified CSE recover mode on CML RVP & Hatch board Change-Id: Id5c12b7abdb27c38af74ea6ee568b42ec74bcb3c Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35226 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2019-09-12mediatek/mt8183: tune EDID for BOE panelPeichao Wang
BUG=b:140545315 TEST=builds Kodama image and verify display working properly Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I52a56f9bbbbef5937a9601f9371e415c74ac9a7c Reviewed-on: https://review.coreboot.org/c/coreboot/+/35317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2019-09-12timestamps: Mostly remove struct timestamp_cacheKyösti Mälkki
Change-Id: Ifcd75630e562af302312f93bdf180aa90f18d21d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35290 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-12timestamps: Refactor CBMEM hookKyösti Mälkki
Separate timestamp_sync_cache_to_cbmem() as it is only used with ENV_ROMSTAGE. Change-Id: Ibe18a5ecf09b2b87d8ee3e828728ad6a8a262206 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35280 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-12mb/google/hatch: Configure SATA DEVSLP pad reset config to PLT_RSTAamir Bohra
BUG=b:133000685 Change-Id: Ia12174e3254153dbca55070f5daf84fd8aac51d0 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2019-09-12soc/intel/cannonlake: Add config for sata devslp pad reset configurationAamir Bohra
CML FSP now provides a provision to configure the SATA devslp GPIO pad reset configuration. This config would help set the the required pad reset configuration. BUG=b:133000685 Change-Id: I4eaea9c6da67f1274ad3e392046a68cddc1b99b6 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-09-12soc/intel/{cnl, icl}: Cache the TSEG regionSubrata Banik
This patch helps to save additional ~19ms of booting time in normal boot and s3 resume on CML-hatch. BUG=b:140008206 TEST=Verified normal boot time on CML-Hatch with latest coreboot Without this CL: Total Time: 929ms With this CL: (TSEG marked as WB) Total Time: 910ms For test marked TSEG as WP/WC: Total Time: ~920ms Change-Id: Ie92d2c9e50fa299db1cd8c57a6047ea3adaf1452 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35026 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-12soc/{amd, intel}: Make use of common postcar_enable_tseg_cache() APISubrata Banik
This patch removes dedicated function call to make TSEG region cache from soc and refers to postcar_enable_tseg_cache(). BUG=b:140008206 Change-Id: I18a032b43a2093c8ae86735c119d8dfee40570b1 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35025 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-09-11Revert "security/tpm/tss/tcg-2.0: Add multi digits support to tlcl_extend()"Julius Werner
This reverts commit fdb9805d6884090fd7bf62dbdf9c858692e55fb4. CB:33252 wasn't reviewed by a TPM maintainer and breaks abstraction layers (pulling TSS-details into TSPI, completely changing interpretation of the arguments to tlcl_extend() based on TSS version). It's also not clear why it was implemented the way it was (should have been much easier and cleaner ways to achieve the same thing). Since the author is not reacting, let's revert it for now. It can be cleaned up and resubmitted later. (Not reverting the header changes since those are not objectionable, and there are later patches dependent on it.) Change-Id: Ice44f55c75a0acc07794fe41c757a7bca75406eb Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-09-11futility: Use HOSTPKGCONFIG for host PKG_CONFIGManoj Gupta
futility is built for the host. However, when cross-compiling, the target's pkg-config is called to get the library paths which can add paths from the cross-compilation tree instead of host. e.g. /build/elm/usr/bin/pkg-config gets called instead of /usr/bin/pkg-config . /build/elm/usr/bin/pkg-config adds the paths specific to the cross-compilation target e.g. /build/elm/usr/lib instead of /usr/lib. This causes linker to complain that files in library paths do not match the architecture. BFD produces a warning while LLD errors out. Fix this by passing PKG_CONFIG from host when building futility. BUG=chromium:999217 TEST=coreboot builds BRANCH=None Cq-Depend: chromium:1778519 Change-Id: Id3afbf25001cf3daa72f36a290c93136cf9f162d Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35316 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-11intel/fsp2_0: Add help text for FSP_TEMP_RAM_SIZE KconfigSubrata Banik
For CML & ICL, FSP requires at least heap = 0x10000 and stack = 0x20000. Refer to FSP integration guide to know the exact FSP requirement. BUG=b:140268415 TEST=Build and boot CML-Hatch and ICL. Change-Id: Ic1463181b4a9dca136d00cb2f7e3cce4f7e57bd6 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35301 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-11arch/x86: Cache the TSEG region at the top of ramSubrata Banik
This patch adds new API for enabling caching for the TSEG region and setting up required MTRR for next stage. BUG=b:140008206 TEST=Build and boot CML-Hatch. Change-Id: I59432c02e04af1b931d77de3f6652b0327ca82bb Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-09-11src: Remove unneeded include <arch/interrupt.h>Elyes HAOUAS
Change-Id: I3323d25b72dab2f9bc8a575ba41faf059ee1ffc4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-09-11mb/google/hatch: Create dratini variantWisley Chen
Create dratini variant BUG=b:140610519 TEST=emerge-hatch coreboot, and boot into chromeos on proto board Change-Id: Ied1240d1be831568e4ab4695b893c3f48821f68b Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35285 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-11mb/google/drallion: enable Elan and Melfas touch panelEric Lai
Drallion uses the same touch panel as Sarien. Copy the deivce from Sarien. BUG=b:140415892,b:138082886 BRANCH=N/A TEST=N/A Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I8e6d2dcf4bd2ed2325137a05811af03692d40342 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35305 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-11superio/common: fix regression in ssdtMichael Niewöhner
ITR2 is specified twice here, which leads to the following error message in Linux: [ 0.263591] ACPI BIOS Error (bug): Failure creating named object [\_SB.PCI0.LPCB.SIO0.ITR2], AE_ALREADY_EXISTS (20190509/dsfield-633) Add comments and fix duplicated field. As there are no users of this code yet, just rename the fields. Tested on Supermicro X11SSH-TF. Change-Id: I4f3307d0992fcf5ad192f412c2bd15d02572a6b0 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35294 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-11emulation/qemu-i440fx/northbridge.c: Fix minor whitespaceHimanshu Sahdev
Change-Id: Ifc3825119c8463a7d17a5c162330f49612ae1b85 Signed-off-by: Himanshu Sahdev <himanshusah@hcl.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35311 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-09-11soc/intel/common/block/cse: Move me_read_config32() to common codeSridhar Siricilla
me_read_config32() is defined in multiple places, move it to common location. Also, this function is usually used for reading HFSTS registers, hence move the HFSTS register definitions to common location. Also add a funtion to check if the CSE device has been enabled in the devicetree and it is visible on the bus. This API can be used by the caller to check before initiating any HECI communication. TEST=Verified reading HFSTS registers on CML RVP & Hatch board Change-Id: Icdbfb6b30a007d469b5e018a313c14586addb130 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35225 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-11arch/x86: Restrict use of _car_global[start|end]Kyösti Mälkki
Restrict the use of symbol names _car_global_[start|end] to be used exclusively with CAR_GLOBAL_MIGRATION=y. They just alias the start and end of .bss section in CAR. Change-Id: I36c858a4f181516d4c61f9fd1d5005c7d2c06057 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35034 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-09-11arch/x86: Drop _car_relocatable_data symbolsKyösti Mälkki
These have become aliases to _car_global_[start|end]. Change-Id: Ibdcaaafdc0e4c6df4a795474903768230d41680d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35033 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-09-11arch/x86: Move ehci_dbg_info outside _car_relocatable_dataKyösti Mälkki
As code already used CBMEM hooks to switch from CAR to CBMEM it was never necessary to have the structure declared inside _car_relocatable_data. Switch to use car_[get|set]_ptr is mostly for consistency, but should also enable use of usbdebug with FSP1.0 romstage. Change-Id: I636251085d84e52a71a1d5d27d795bb94a07422d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-11timestamps: Improve collection for ENV_ROMSTAGE_OR_BEFOREKyösti Mälkki
Keep track of the active timestamp table location using a CAR_GLOBAL variable. Done this way, the entire table can be located outside _car_relocatable_data and we only switch the pointer to CBMEM and copy the data before CAR gets torn down. Fix comments about requirements of timestamp_init() usage. Remove timestamp_cache from postcar and ramstage, as CBMEM is available early on. Change-Id: I87370f62db23318069b6fd56ba0d1171d619cb8a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35032 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-10mb/google/kukui: Enable MT8183_DRAM_EMCPHuayang Duan
MT8183_DRAM_EMCP is enabled for devices using eMCP to run at a high DRAM frequency (e.g., 3600Mbps). BUG=b:80501386 BRANCH=none TEST=Memory test passes on EMCP platform Change-Id: Icf875427347418f796cbf193070bf047844d2267 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34433 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-10mediatek/mt8183: Add new option for eMCP DDRHuayang Duan
Devices using eMCP may run at a high DRAM frequency (e.g., 3600Mbs) while those with discrete DRAM can only run at 3200Mbps. A new option MT8183_DRAM_EMCP is added to Kconfig for a mainboard to select, depending on whether it supports eMCP or not. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I9b73c8b512db5104896ea0d330d56e63eb50a44b Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34989 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-09-10crossgcc: Upgrade CMake to 3.15.3Elyes HAOUAS
Changes: https://cmake.org/cmake/help/v3.15/release/3.15.html Change-Id: Id3283b4a091a5a8afd76235059636bba1c238f0f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-10Add .editorconfig fileMartin Roth
.editorconfig files are widely supported and offer basic configuration options for the project. This sets the indention style, line-ending, character set, tells the editor to make sure there's a newline at the end of the file and to strip trailing whitespace. For directories within the coreboot directory that would prefer a different setting, additional .editorconfig files can be placed in those directories to override any of these settings. See the EditorConfig website for more information. https://web.archive.org/web/https://editorconfig.org Change-Id: Iecf1c5450edb0db533569189aa45233b91997870 Signed-off-by: Martin Roth <martin@coreboot.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-10AUTHORS: Move src/cpu copyrights into AUTHORS fileMartin Roth
As discussed on the mailing list and voted upon, the coreboot project is going to move the majority of copyrights out of the headers and into an AUTHORS file. This will happen a bit at a time, as we'll be unifying license headers at the same time. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Id6070fb586896653a1e44951a6af8f42f93b5a7b Reviewed-on: https://review.coreboot.org/c/coreboot/+/35184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-10AUTHORS: Move src/cpu/intel copyrights into AUTHORS fileMartin Roth
As discussed on the mailing list and voted upon, the coreboot project is going to move the majority of copyrights out of the headers and into an AUTHORS file. This will happen a bit at a time, as we'll be unifying license headers at the same time. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I39f52764dc377c25953ef5dba16982a0b4637cdb Reviewed-on: https://review.coreboot.org/c/coreboot/+/35181 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Guckian Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-10AUTHORS: Move src/cpu/amd copyrights into AUTHORS fileMartin Roth
As discussed on the mailing list and voted upon, the coreboot project is going to move the majority of copyrights out of the headers and into an AUTHORS file. This will happen a bit at a time, as we'll be unifying license headers at the same time. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I77275adb7c15b242e319805b8a60b7755fa25db5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-10AUTHORS: Move src/console copyrights into AUTHORS fileMartin Roth
As discussed on the mailing list and voted upon, the coreboot project is going to move the majority of copyrights out of the headers and into an AUTHORS file. This will happen a bit at a time, as we'll be unifying license headers at the same time. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I2f350cc3008b17516b5a42cdf07e28d2da5995e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35179 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-10AUTHORS: Move src/commonlib copyrights into AUTHORS fileMartin Roth
As discussed on the mailing list and voted upon, the coreboot project is going to move the majority of copyrights out of the headers and into an AUTHORS file. This will happen a bit at a time, as we'll be unifying license headers at the same time. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I4c9351652d81040cc4e7b85bdd1ba85709a74192 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35178 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-10AUTHORS: Move src/arch/x86 copyrights into AUTHORS fileMartin Roth
As discussed on the mailing list and voted upon, the coreboot project is going to move the majority of copyrights out of the headers and into an AUTHORS file. This will happen a bit at a time, as we'll be unifying license headers at the same time. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ifd4329905847d9dd06de67b9a443c8ee50c0e7a7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35177 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-10mb/google/poppy/variant/nocturne: add EC_SYNC_GPIONick Vaccaro
Setup EC_PCH_ARCORE_INT_L, tied to GPP_D17, and define as EC_SYNC_GPIO.. - change GPP_D17 definition to PAD_CFG_GPI_APIC_INVERT as EC_PCH_ARCORE_INT_L is active low - add EC_SYNC_GPIO to the group of chromeos_gpios for use by depthcharge BUG=b:139384979 BRANCH=none TEST="emerge_nocturne coreboot depthcharge chromeos-bootimage", flash & boot nocturne in dev mode, verify that volume up and down buttons work in the dev screen and that the device boots properly into the kernel. Change-Id: Ia43c622710fde8686c60b836fb8318931d79eb61 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-10mb/google/hatch/variants/helios: Modify FPU power on sequenceFrank_Chu
pull in the FPU VDDIO turn on to fix the power leakage problem on FPU VDDIO and FPU CS during power on sequence. BUG=b:138638571 BRANCH=none TEST=emerge-hatch coreboot chromeos-bootimage Signed-off-by: Frank_Chu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I3f6bf3676922e987c2e282b697a2333e2d90289e Reviewed-on: https://review.coreboot.org/c/coreboot/+/34858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-09-10mb/google/octopus: Add a new sku for meepWisley Chen
Add a new sku4 for meep: sku4: Stylus + no rear camera BUG=b:140360096 TEST=emerge-octopus coreboot Change-Id: Icde7f032c0acf7562b5d5f2c6a8b0c2de91c45b2 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-09-10mb/google/kahlee/treeya: Tune I2C bus 1, 2 and 3 clockPeichao Wang
Tune I2C bus 1, 2 and 3 clock and make them meet spec. BUG=b:140665478 TEST==flash coreboot to the DUT and measure I2C bus 1,2,3 clock frequency less than 400KHz Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I6b2a51a866e57d13fe528452e4efdcf17a72317f Reviewed-on: https://review.coreboot.org/c/coreboot/+/35298 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-10soc/intel/skylake: Add option to toggle Hyper-ThreadingPatrick Rudolph
Tested on Supermicro X11SSH-TF. Change-Id: I3ebab68ff868c78105bb4b35abffb92f3ccf1705 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-09-09mb/google/hatch: Distinguish SKU1 and 2 for eMMC and SSD respectivelyPeichao Wang
1. SKU1 for eMMC 2. SKU2 for SSD BUG=b:140008849, b:140573677 TEST=Verify SSD is disabled when SKU ID = 2/4/21/22 Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I827e6f1420801d43e0eb4708b8b8ad1692ef7e9f Reviewed-on: https://review.coreboot.org/c/coreboot/+/35204 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-09soc/amd/picasso: Update TSC and monotonic timerMarshall Dawson
Picasso's TimeStamp Counter is a new design and different than Stoney Ridge. Although advertised as invariant, the ST TSC did not become so until midway through POST making it an unreliable source for measuring time. This is not the case for Picasso. Remove the Stoney Ridge monotonic timer code and rely on the TSC. Modify the calculation used in Family 15h of finding the number of boost states first, and get the frequency directly out of the Pstate0 register. Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I909743483309279eb8c3bf68852d6082381f0dff Reviewed-on: https://review.coreboot.org/c/coreboot/+/33765 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-09-09soc/amd/common/lpc: Add decode disable functionMarshall Dawson
It is already trivial to set D14F3x44 to 0, but add a function to wipe both that and the settings in D14F3x48, along with x48's associated addresses. Change-Id: Ibec25562b2a1568681aea7caf86f00094c436a50 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-09-09soc/amd/common: Add missing stdint.h to lpc.hMarshall Dawson
Include the file containing the typedefs for uint_*. Change-Id: If33765b6dc4236c4b38860bfc4f2cef9b226b81d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35269 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-09-09arch/x86: Refactor CAR_GLOBAL quirk for FSP1.0Kyösti Mälkki
These platforms return to romstage from FSP only after already having torn CAR down. A copy of the entire CAR region is available and discoverable via HOB. Previously, CBMEM console detected on-the-fly that CAR migration had happened and relocated cbmem_console_p accoringlin with car_sync_var(). However, if the CAR_GLOBAL pointing to another object inside CAR is a relative offset instead, we have a more generic solution that can be used with timestamps code as well. Change-Id: Ica877b47e68d56189e9d998b5630019d4328a419 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35140 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-09intel/fsp_broadwell_de: Add early timestampsKyösti Mälkki
Modify intel/fsp_broadwell_de such that timestamp_init() is before raminit (and CAR teardown of FSP1.0), adding two new early timestamps while doing so. Other FSP1.0 platforms fsp_baytrail and fsp_rangeley already do it this way. Change-Id: I3b73e4a61622f789a49973a43b21e8028bcb8ca8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35279 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-09intel/fsp_broadwell_de: Enable CONSOLE_CBMEM by defaultKyösti Mälkki
In the very early days of FSP 1.0 this did not work so we kept it disabled. Change-Id: I8a88be6df335598d4c6007a8b7ff307b293e1f97 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35284 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-09-09soc/intel/common/block/cse: Add helper function heci_send_receiveSridhar Siricilla
Aggregate sending and receiving HECI messages into a single function. TEST=Verified sending and receiving reply HECI message on CML RVP & Hatch board Change-Id: Ic95239eef8591d3aadf56a857c97f3f1e12b16ac Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35224 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-09soc/intel/cannonlake: Allow coreboot to handle SPI lockdownSubrata Banik
This patch disables FSP-S SPI lockdown UPDs and lets coreboot perform SPI lockdown (i.e.flash register DLOCK, FLOCKDN, and WRSDIS before end of post) in ramstage. BUG=b:138200201 TEST=FSP debug build suggests those UPDs are disable now. Change-Id: Id7a6b9859e058b9f1ec1bd45d2c388c02b8ac18c Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35299 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2019-09-09lib/spd_bin: Extend DDR4 spd informationEric Lai
From DDR4 SPD spec: Byte 4 (0x004): SDRAM Density and Banks Bits [7, 6]: 00 = 0 (no bank groups) 01 = 1 (2 bank groups) 10 = 2 (4 bank groups) 11 = reserved Bit [5, 4] : 00 = 2 (4 banks) 01 = 3 (8 banks) All others reserved Separate DDR3 and DDR4 banks. And extened capmb, rows, cols and ranks. Separate DDR3 and DDR4 ORGANIZATION/BUS_DEV_WIDTH offset. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I5f56975ce73d8ed2d4de7d9fd08e5ae86993e731 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35206 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-09mb/google/drallion: modify USB settingEric Lai
Based on HW schematic to modify USB setting. Drallion has two type C on left and two type A on right. BUG=b:138082886 BRANCH=N/A TEST=N/A Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I925de209635d92ef61ccb9114efebb4b10f30e87 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35283 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-09-09mb/asrock/h110m: add missing pci devices to treeMaxim Polyakov
These devices are enabled after initializing in the FSP Change-Id: I0a15537b6ba56fcf63267641ef2219f24d25d9c4 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-09-09mb/asrock/h110m: disable unused sata portsMaxim Polyakov
Sets all unused sata ports to disable in the device tree Note: SATA4 and SATA5 are located at the bottom of the board, but there is no connector for this. Apparently, a board with an increased number of ports is very rare. Perhaps this is a separate variant of the Asrock motherboard. For this reason, these ports are also disabled Change-Id: I5b3ad372f1d6607cc7b4a78e3c59d2a5ae1d2cf5 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35071 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-09-09mb/asrock/h110m: disable unused serial busesMaxim Polyakov
Disable spi0, i2c0 and i2c1 in the “SerialIoDevMode” register for the following reasons: 1. when the AMI BIOS is used, these pci devices are disabled in lspci.log; 2. there are no pads in the inteltool.log that use the functions of these buses Change-Id: I01ab10eb3fd41e81a1726805247c2b472d72287c Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35070 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-09mb/asrock/h110m: remove unsed i2c_voltage settingsMaxim Polyakov
The string "register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" was mistakenly taken from the Intel KBL-RVP8 devicetree.cb. Remove it, since the i2c4 bus is disabled in the "SerialIoDevMode" register Change-Id: I44ecd5c22efd66b02a2851dc14a1a95421f39a71 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35069 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-09-09mb/asrock/h110m: use VR_CFG_AMP() macro to set PSI thresholdMaxim Polyakov
Change-Id: Iafeb7f7689a16d3b16eb0564c4dd72919a8d1382 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-09-09mb/asrock/h110m: fix VR domains configurationMaxim Polyakov
1) VR domains current limit Icc max for Sky/Kaby Lake S is set based on the processor TDP [1]. Updates information about this 2) Sets VR voltage limit to 1.52V, as described in the datasheets [2,3] [1] Change-Id: I303c5dc8ed03e9a98a834a2acfb400022dfc2fde [2] page 112-119, 6th Generation Intel(R) Processor Families for S-Platforms, Volume 1 of 2, Datasheet, August 2018. Document Number: 332687-008EN [3] 7th Generation Intel(R) Processor Families for S Platforms and Intel(R) Core(TM) X-Series Processor Family Datasheet, Volume 1, December 2018, Document Number: 335195-003 Change-Id: I6e1aefde135ffce75a5d837348595aa20aff0513 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-09src/southbridge/amd/pi/hudson/lpc.c: add missing MCFG ACPI table generationMichał Żygowski
The MCFG ACPI table was not being created. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I35bdefb2a565d18917a2f6517d443890f93bd252 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35286 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-09-09soc/intel/cannonlake: Add ability to disable Heci1Bora Guvendik
Decide if HECI1 should be hidden prior to boot to OS. BUG=none TEST=Boot to OS, verify if Heci1 is disabled on hatch system using FSP 1344. Change-Id: I7c63316c8b04fb101d34064daac5ba4fdc05a63c Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-09-09drivers/intel/fsp2_0: Fix minor whitespaceMarshall Dawson
Change-Id: I03a62c6a35053b67bfc609a365068cf284bcc1a0 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35265 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-09intel/fsp2_0: Move temporary RAM to .bss with FSP_USES_CB_STACKKyösti Mälkki
The documentation for StackBase and StackSize in FSPM_ARCH_UPD is confusing. Previously the region was shared for heap and stack, starting with FSP2.1 only for heap (or 'temporary RAM') for HOBs. Moving the allocation outside DCACHE_BSP_STACK_SIZE allows use of stack guards and reduces amount of reserved CAR for bootblock and verstage, as the new allocation in .bss is only taken in romstage. BUG=b:140268415 Change-Id: I4cffcc73a89cb97ab7759dd373196ce9753a6307 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-07security/tpm: Use correct hash digest lengthsJacob Garber
TPMU_HA is a union of all the different hash digests, and so sizeof(TPMU_HA) evaluates to 64 (the size of the largest one). This will lead to out-of-bounds writes when copying smaller digests, so use the specific digest size for each algorithm. Change-Id: Ic9101f157d5a19836b200ecd99f060de552498d2 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 14049{49,50,51,52,53,54,55,56,57,58,60,61,62} Reviewed-on: https://review.coreboot.org/c/coreboot/+/35287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-09-06src/vendorcode/intel: Update Cometlake FSP headers as per FSP v1344Ronak Kanabar
Cq-Depend: chrome-internal:1759167 Change-Id: Ib5784eb8c0f7c6e56950dad5c8254e00aa73cef4 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35245 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-06soc/amd/common: Add missing stdint.h to acpimmio.hMarshall Dawson
Include the file containing the typedefs for uint_*. Change-Id: I3eae80a677e9d6932dc115523da2c0819a371fa7 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35268 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-06soc/amd/common: Add missing stdint.h to BiosCallOuts.hMarshall Dawson
Include the file containing the typedefs for uint_*. Change-Id: Ib0eea9bfd0c8d9e3eba257b561980accf5b4bab4 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35267 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-06superio/smsc/lpc47b397: fix regression in ops overrideFelix Held
b0d868e8fe3f9a13f9be109fc3b73dfa949bec15 introduced a regression Change-Id: I231888f2702027a80f25eb418c4e4703e55db920 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marcello Sylvester Bauer <sylvblck@sylv.io> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-09-06src/superio/aspeed/ast2400: Use new SuperIO acpigenChristian Walter
Use the new SuperIO ACPI generator to make includes in DSDT obsolete. Manually tested on X11SSH-TF and verified that ACPI tables are correct. Change-Id: I2ef49bb6f733994b249ae46f0460234380b552b8 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33253 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-06soc/intel/skylake: Add Lewisburg family PCH supportMaxim Polyakov
This patch adds Lewisburg C62x Series PCH support by adding the Production and Super SKUs of the following PCI devices: - LPC or eSPI Controllers, - PCI Express Root Ports, - SSATA and SATA Controllers, - SMBus, - SPI Controller, - ME/HECI, - Audio, - P2SB, - Power Management Controller. These changes are in accordance with the documentation: [*] page 39, Intel(R) C620 Series Chipset Platform Controller Hub (PCH) Datasheet, May 2019. Document Number: 336067-007US Change-Id: I7eaf2c1bb725ffed66f86c023c415ad17fe5793d Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
2019-09-06security/tpm/tss/tcg-2.0: Add support for algorithmsFrans Hendriks
Function marshal_TPMT_HA() supports SHA-256 only. Add support for more algorithms. BUG=N/A TEST=Build binary and verified logging on Facebook FBG-1701 Change-Id: Ife8d44484c7a7cb717035e5ae0870bbee205661b Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35276 Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-06superio/common: Add ssdtgen for generic SuperIOsPatrick Rudolph
Add a generic SuperIO ACPI generator, dropping the need to include additional code in DSDT for SuperIO. It generates a device HID based on the decoded I/O range. Tested on Supermicro X11SSH-TF using AST2400. The SSDT contains no errors and all devices are present. Possible TODOs: * Add "enter config" and "exit config" bytes * Generate support methods to enter and exit config mode * Generate support methods to query, change or disable current resource settings on specific LDNs Change-Id: I2716ae0580d68e5d4fcc484cb1648a2cdc1f4ca0 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33033 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-09-06soc/mediatek: Fix USB enumeration issueChangqi Hu
Some USB 3.0 devices fail to be enumerated after USB reset, and xhci port status register shows the device is disconnected. After measuring the USB signal, we found that the USB disconnect threshold was lower and that the disconnect event was triggered unexpectedly. USB designers suggest changing discth to 15. BUG=b:122047652 TEST=emerge-kukui coreboot chromeos-bootimage Change-Id: I0e8556035b49d693a42cbe1099a6882a1c0ed0d1 Signed-off-by: Changqi Hu <changqi.hu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35150 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-09-06mb/google/hatch/variants/helios: Update DPTF parameters and TDP PL1/PL2Frank_Chu
Applying first tuned DPTF parameters and TDP PL1/PL2 values for helios. BUG=b:138752455 BRANCH=none TEST=emerge-hatch coreboot chromeos-bootimage Signed-off-by: Frank_Chu <frank_chu@pegatron.corp-partner.google.com> Change-Id: Ic7a96c33ce710c32b57e2ad8066830ff83398c57 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2019-09-06util/sconfig: Expose usable PCI and PNP device namesKyösti Mälkki
These devices can be accessed directly by symbolname, without a search and walk through the tree, as they have static paths. Change-Id: I711058f5c809fa9bc7ea4333aaebad6847ebdfd4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31933 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-06nb/intel/x4x/raminit: Move dummy reads after JEDEC initArthur Heymans
Vendor only does dummy reads right after JEDEC init is finished and dram init was marked as finished. Dummy reads also make much more sense after JEDEC init as a way to send a few JEDEC commands, presumably as a way to make sure it is ready. TESTED on ga-g41m-es2l (still boots fine) Change-Id: I8069f9c08ad5e5268ddbe3711d58bc42522f938c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/20979 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-09-05mb/google/octopus: Set sar file name for meep skuWisley Chen
Set meep sar file name by sku number Cq-Depend: chromium:1768380 BUG=b:138261454, b:118782854 BRANCH=octopus TEST=emerge-octopus coreboot, and check wifi_sar-meep.hex Change-Id: I25aa3080392ce277e537c973088dde569246630e Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35211 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-05inteltool: Add Skylake Xeon E DMI3 Host bridge IdMaxim Polyakov
Tested on Intel S2600WF and SUPERMICRO MBD-X11DPL-I-O Change-Id: I4b429536fc2db16d770120487e4c383da437593a Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-09-05mb/google/drallion: modify PCIE settingEric Lai
Based on HW schematic to modify PCIE setting. BUG=b:138082886 BRANCH=N/A TEST=N/A Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ia744a6f3cba76c507c1c43b0a981cb6d89c1a40f Reviewed-on: https://review.coreboot.org/c/coreboot/+/35243 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-09-05inteltool: add Lewisburg C62x GPIOs supportMaxim Polyakov
These changes are in accordance with the documentation: [*] page 361, Intel(R) C620 Series Chipset Platform Controller Hub (PCH) Datasheet, May 2019. Document Number: 336067-007US Tested on SUPERMICRO MBD-X11DPL-I-O and Intel S2600WF Wolf Pass Change-Id: I43f8f3701de6ab7f89a78c2f5b939b5edd6d5b9d Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34942 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-09-05mb/google/octopus: Load custom SAR values by SKU ID for BloogTony Huang
Use sku-id to load the SAR values for Bloog device. BUG=b:138180187 BRANCH=octopus TEST=build and verify load Bloog SAR by sku-id Cq-Depend: chromium:1771477 Change-Id: Id0bc2609fd1c4eaeb380f8f1532ab30d34e2aeb3 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-05mb/siemens/mc_apl5: Disable IGD if no EDID data availableMario Scheithauer
To avoid possible panel failures due to incorrect timing settings for PTN3460, the internal graphic device should be disabled. Change-Id: Ie0b9ed99fb78461bb48d6f2ff328643cd8c2cd15 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-09-05soc/intel/cannonlake: memory spd data debugEric Lai
Add printing SPD data for debug usage. BUG=b:139397313 BRANCH=N/A TEST=Tested the on Hatch and checked cbmem log. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I1e257a8ea6ff9c906267841819d2a4b62a9e0b9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/35235 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-09-05security/tpm/tss/tcg-2.0: Add multi digits support to tlcl_extend()Frans Hendriks
To support multi digists the tlcl_extend() for TPM2 expects TPML_DIGEST_VALUE pointer as input argument. BUG=N/A TEST=Build binary and verified logging on Facebook FBG-1701 Change-Id: I8d86c41c23e4e93a84e0527d7cddcfd30d5d8394 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33252 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
2019-09-04drivers/spi/spi_flash.c: Add SPI vendor IDsRichard Spiegel
Currently SPI vendor IDs are magic numbers in spi_flash.c. These definitions are needed for AMD's fch_spi. So add the definitions to spi_generic.h and use it at spi_flash.c BUG=b:136595978 TEST=Build test of several platforms that don't use stoneyridge. Build and boot grunt (using stoneyridge new fch_spi). Change-Id: Ie39485d8c092151db8c9d88afaf02e19c507c93f Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35240 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Martin Roth <martinroth@google.com>
2019-09-04mb/google/kahlee/treeya: Update the memory timing table for Treeya to the 2T ↵Peichao Wang
table Rename the table from Liara specific to simply specifying that it's using 2T command rate BUG=139841929 TEST=build and do stress test Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I6e10b95c8aea50e68d8a3b710f30dda4f6b807d3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-09-04mb/google/kahlee/treeya: override sku_id() functionPeichao Wang
override 'uint32_t sku_id(void)' so that lib_sysinfo.sku_id get a correct value in depthcharge BUG=b:140010592 BRANCH=none TEST=boot treeya board, in depthcharge stage, lib_sysinfo.sku_id print correct value. Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I631f62021e8104a69a43667a811c9c23e3105596 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Magf - <magf@bitland.corp-partner.google.com> Reviewed-by: Edward Hill <ecgh@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-09-04mb/google/hatch/var/kindred: Update DPTF parameters and TDP PL1/PL2David Wu
Add TEMP_SENSOR_3 to DPTF, Update DPTF parameters and TDP PL1/PL2 values Cq-Depend: chromium:1751304 BUG=b:140127035 TEST=FW_NAME=kindred emerge-hatch coreboot chromeos-ec chromeos-bootimage Change-Id: I1817e277f4641db6bedc8b640b1dc5d57502d5dd Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35131 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2019-09-04mainboard/amd: Add padmelon board codeRichard Spiegel
Padmelon board code was written for Merlin Falcon (family 15h models 60h-6fh), but as the needed binaries are not yet merged (commit 33615), a config HAVE_MERLINFALCON_BINARIES was added. If the binaries are not available, the board defaults to Prairie Falcon, which use the same binaries as Stoney Ridge. Once the binaries are merged, the config will be eliminated. Fan control is done through F81803A SIO, and IRQ/GPIO and other board characteristics are the same regardless of Merlin Falcon or Prairie Falcon. Padmelon board was created to accept Prairie Falcon, Brown Falcon and Merlin Falcon. The requested development was for Merlin Falcon. There are some small spec changes (such as number of memory channels) between SOCs. Brown Falcon was not investigated, Prairie Falcon is very similar to Stoney Ridge. Started from Gardenia code, added changes created by Marc Jones and finally revised against schematic, which added changes to GPIO settings. BUG=none. TEST=Both versions tested and boot to Linux using SeaBIOS. Change-Id: I5a366ddeb4cfebd177a8744f6edb87aecd4787dd Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-09-04Documentation/soc/intel/fsp: Add link for external FSP2.1 specSubrata Banik
Change-Id: I5d1abd6252bda2be09285cd878a483f055abcd7b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35238 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-04mediatek/mt8183: postpone dcxo low power mode settingWeiyi Lu
Consider the association between modem[1] and DCXO, this patch is a fix for eb5e47d("mediatek/mt8183: update dcxo output buffer setting") [2] We should not disable XO_CEL and block the bblpm request when modem is still ON. For power-saving, we still could disable unused XO_CEL and mask request to disable unused power mode when modem is no longer be used. [1] https://review.coreboot.org/c/coreboot/+/32666 [2] https://review.coreboot.org/c/coreboot/+/32323 BRANCH=none TEST=Boots correctly on Krane. Change-Id: I047ebed615e874977ca211aafd52b5551c71b764 Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-09-04Documentation/coding_style.md: Update line length limitAngel Pons
Line length limit was bumped to 96 characters, but the coding style did not reflect such a change. Change-Id: Ifdbb8bc04e49e1fbe9b0c8a642ae814d5a60004a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35215 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-04inteltool: add Lewisburg family C62x chipset PCI IDsMaxim Polyakov
These changes are in accordance with the documentation: [*] page 39, Intel(R) C620 Series Chipset Platform Controller Hub (PCH) Datasheet, May 2019. Document Number: 336067-007US Change-Id: I7a1ae0cc4c5d4b02599dfafd30f4a87b3ce74b74 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34941 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-03security/tpm/tss/tcg-2.0: Use tlcl_get_hash_size_from_algo() for hash sizeFrans Hendriks
mashal_TPMT_HA() uses size of SHA-256 hash. Use tlcll_get_hash_size_from_algo() to determince the hash size. BUG=N/A TEST=Build binary and verified logging on Facebook FBG-1701 Change-Id: I739260e13e9cd10a61d52e13e8741b12ec868d7f Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 17:18:16 +0000