summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-06-03mb/system76/rpl: Hook up TAS5825M initTim Crawford
Ensure per-board smart amp init is configured. Fixes speaker output on oryp12. Change-Id: I40ff1889dd144bf83ef85979a55535493aa7abdd Fixes: 8b9716e2269d ("mb/system76/rpl: Add Oryx Pro 12 as a variant") Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82726 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2024-06-03mb/system76: Add SPDX ID to devicetree filesTim Crawford
Change-Id: I55f2730f7277a3c699b86ded5864e9690d92d518 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82700 Reviewed-by: Jeremy Soller <jeremy@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-03soc/intel/meteorlake: Hook up PchHdaAudioLinkHdaEnable to devicetreeMichał Kopeć
The comment that the PchHdaAudioLink UPDs only configure GPIOs is incorrect. Setting this to 1 is needed to enable HDA audio link. Same exact situation as with Alder Lake in CL 71715. Change-Id: Iecbe106ae18b5a8b53c04a5335a4e4c4ae27c7a0 Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82685 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Crawford <tcrawford@system76.com>
2024-06-03ec/dasharo/ec: Add initial copy of ec/system76/ecMichał Kopeć
Initial commit is a copy of ec/system76/ec from tag v24.02.1 (commit 0a280ff7) with string changes. Dasharo-specific features will be added in subsequent commits, similar to how Librem EC support was added in changes 52390 and 52391. Change-Id: Ic7c3d9413488026548514963eb78accc28e41e06 Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-06-03device_tree: Add function to get top of memory from a FDT blobAlper Nebi Yasak
coreboot needs to figure out top of memory to place CBMEM data. On some non-x86 QEMU virtual machines, this is achieved by probing the RAM space to find where the VM starts discarding data since it's not backed by actual RAM. This behaviour seems to have changed on the QEMU side since then, VMs using the "virt" model have started raising exceptions/errors instead of silently discarding data (likely [1] for example) which has previously broken coreboot on these emulation boards. The qemu-aarch64 and qemu-riscv mainboards are intended for the "virt" models and had this issue, which were mostly fixed by using exception handlers in the RAM detection process [2][3]. But on 32-bit RISC-V we fail to initialize CBMEM if we have 2048 MiB or more of RAM, and on 64-bit RISC-V we had to limit probing to 16383 MiB because it can run into MMIO regions otherwise. The qemu-armv7 mainboard code is intended for the "vexpress-a9" model VM which doesn't appear to suffer from this issue. Still, the issue can be observed on the ARMv7 "virt" model via a port based on qemu-aarch64. QEMU docs for ARM and RISC-V "virt" models [4][5] recommend reading the device tree blob it provides for device information (incl. RAM size). Implement functions that parse the device tree blob to find described memory regions and calculate the top of memory in order to use it in mainboard code as an alternative to probing RAM space. ARM64 code initializes CBMEM in romstage where malloc isn't available, so take care to do parsing without unflattening the blob and make the code available in romstage as well. [1] https://lore.kernel.org/qemu-devel/1504626814-23124-1-git-send-email-peter.maydell@linaro.org/T/#u [2] https://review.coreboot.org/c/coreboot/+/34774 [3] https://review.coreboot.org/c/coreboot/+/36486 [4] https://qemu-project.gitlab.io/qemu/system/arm/virt.html [5] https://qemu-project.gitlab.io/qemu/system/riscv/virt.html Change-Id: I8bef09bc1bc4e324ebeaa37f78d67d3aa315f52c Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80322 Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2024-06-03Revert "tree: Use Wcalloc-transposed-args command option"Elyes Haouas
This reverts commit b3db3abd6311924930f3250c9f9fc3157fbbf7da. Reason for revert: `Wcalloc-transposed-args` is new command option came with GCC-14. older versions will not support it. Change-Id: I74ef8de1f7d38e1e0519c3b41e79fd9b11d8e16f Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82759 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-03lib/device_tree.c: Fix wrong check for FDT validityMaximilian Brune
Obviously one should return NULL if a FDT is not valid an not the other way around. Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Change-Id: I77c0e187b841e60965daac17025110181bdd32bc Reviewed-on: https://review.coreboot.org/c/coreboot/+/82773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2024-06-01tree: Add some SMBIOS_PROCESSOR_FAMILY macrosElyes Haouas
Change-Id: Ibe551a4c83f416ba30326077aa165818cf79c1fd Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82648 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-31mainboard/google/rex: Enable Rex64 build configurationSubrata Banik
- Add Rex64 board to Kconfig menu - Enable building for Rex64 with x86_64 support Change-Id: I02e2c49b4aeb2cb98d9d0cb66717db18c3f96d45 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82625 Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-05-31soc/intel: Fix pointer size mismatch errors in crashlogAppukuttan V K
The crashlog code in intel/common/block and meteorlake soc was casting integer addresses directly to pointer types, which caused compilation errors in x86_64 bit builds. This commit fixes the issue by using uintptr_t for casting integer addresses to pointer types before dereferencing. BUG=b:329034258 TEST=Successfully build Meteor Lake (rex) in both x86_32 and x86_64 modes. Change-Id: I2d0814a8b767270ec140341bfb51d0782469545d Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82481 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-05-31mb/google/brya/var/nova: Update USB ports settingKenneth Chan
Update used USB port[2][3](type-a) setting for nova. BUG=b:328711879 TEST=emerge-constitution coreboot chromeos-bootimage Change-Id: I63cf97b23627feac05743f2a6e514a33fcaf7dff Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82703 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
2024-05-31soc/intel/xeon_sp: Add _OSC ASL generation utils for IIO domainsShuo Liu
For multi-SKU/SoC supports, IIO domain layouts are returned from FSP HOBs. Add _OSC ASL generation utils so that static IIO domain layout definition file per SKU/SoC are not needed any more. The _OSC generation codes is a thin AML generation layer which further invokes \_SB.POSC which is defined in ASL. The ASL handler is able to handle boot-time generated info as parameters while keeps good readability for the ease of maintenance. In this case, firmware granted capabilities are calculated in boot time and passed to ASL handler as parameters. TEST=Build and boot on intel/archercity CRB Change-Id: Ibd3bfa2428725fe593754436d5ed75a3a11b4cdc Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82034 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2024-05-31vc/edk2-stable202302: Remove FSPM_ARCH_UPD config guardAppukuttan V K
This commit removes config guard around FSPM_ARCH_UPD from the FspApi.h header file. This change is done to ensure that this header file can be used with both x86_32 and x86_64 architectures and also with different FSP specification versions. The following modifications are made: - Removes PLATFORM_USES_FSP2_X86_32 config guard around FSPM_ARCH_UPD, this was added to isolate the structure from x64 build. This is not really required since the x64 build uses FSP2.4 structures. BUG=b:343428206 TEST=Verified x86_32 and x86_64 builds on Meteor Lake board (Rex) Change-Id: Idc849de73723036323f81dfd055730f6669cd52e Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82425 Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-31mb/google/trulo: Support OCP fault on A0/1 portsPranava Y N
The devicetree entry and gpio.c updated as per the schematics of Trulo to map the OC fault signals from A0/A1 USB ports. BUG=b:335858378 TEST= Able to build google/trulo Change-Id: Ic17debc5eecebca8c000c43a660e1b52d2932f2a Signed-off-by: Pranava Y N <pranavayn@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82637 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2024-05-31soc/intel/meteorlake: Exclude deprecated upd from FSP2.4 buildsAppukuttan V K
EnableMultiPhaseSiliconInit upd is deprecated and has been removed starting with v2.4 of FSP specification. Multi-phase silicon initialization is mandatory for all FSP implementations compliant to v2.4. The following modifications are made: - In fsp_params.c and silicon_init.c EnableMultiPhaseSiliconInit update is guarded so that it will get included only if FSP2.4 is not selected. BUG=b:329034258 TEST=Verified x86_32 and x86_64 builds on Meteor Lake board (Rex) Change-Id: Icdbf3bacc0a05975fc941b264fd400d74f506fce Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-05-31soc/intel/meteorlake: Tailor FSP Version Selection for ArchitectureSubrata Banik
* Conditionally select FSP 2.4 when x86_64 support is available (HAVE_X86_64_SUPPORT). * Default to FSP 2.3 otherwise. * Adjust default FSP header path to align with architecture. BUG=b:242829490 TEST=Able to build google/rex in both 32-bit and 64-bit mode. Change-Id: Ib77a34c6bf7bca3485a197f109d1550ac3d51cc0 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-05-31soc/intel/meteorlake: Enable eSOL without 64-bit supportSubrata Banik
This change allows eSOL to be enabled on production Meteor Lake silicon even when 64-bit support is not present. eSOL support is still TBD for 64-bit FSP hence, skip adding this support for 64-bit build. TEST=Able to build and boot google/rex64 w/o eSOL. Change-Id: I16762e5b74ae0aaa3c28730479a1fd9defc4d93c Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82716 Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-30tree: Remove duplicated <soc/gpio.h>Elyes Haouas
<gpio.h> is supposed to chain-include <soc/gpio.h>. Change-Id: Ib25581bd2c8dd38cdd0396561ce5f9a782365f14 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82691 Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-30vc/intel/fsp/mtl: Add x86_64 FSP V3471.91 headersAppukuttan V K
This commit introduces new header files of V3471.91 for the x86_64 architecture in the fsp2_0/meteorlake directory. FSP2.4 brings FSP 64-bits support and the soc Kconfig file has been updated to select this new header path when FSP2.4 is in use. BUG=b:329034258 TEST=Verified x86_32 and x86_64 builds on Meteor Lake board (Rex) Change-Id: Ib41b57e794311db729ac65a968f562aa127e86c3 Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82473 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2024-05-30vc/intel/fsp/mtl: Organize FSP headers into x86_32 directoryAppukuttan V K
This commit moves FSP V3471.91 header files for Meteor Lake into a new x86_32 directory to better organize the files based on the architecture. The Kconfig file has been modified accordingly to reflect the new paths of the relocated headers. BUG=b:329034258 TEST=Verified x86_32 and x86_64 builds on Meteor Lake board (Rex) Change-Id: Id30186a8b1b5a9082f498e18a3378f5e9907b668 Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82424 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-05-30soc/intel/meteorlake: Adjust FSP parameters for FSP2.4 compatibilityAppukuttan V K
This commit updates the type definitions for FSP parameters in the Meteor Lake platform to ensure compatibility with the FSP2.4 specification, that supports 64-bit builds for the first time and this also ensures that parameter types works for both 32-bit and 64-bit builds. - In fsp_params.c, FSPS_ARCH_UPD macro is changed to FSPS_ARCHx_UPD which supports FSP2.4 and older specifications. Special handling is added for FspEventHandler assignment to handle as the variable type is different in both cases. - In meminit.c, the type for SPD pointers is changed from uint32_t to efi_uintn_t to support both 32-bit and 64-bit builds. BUG=b:329034258 TEST=Verified x86_32 and x86_64 builds on Meteor Lake board (Rex) Change-Id: Ide220f60184135a6488f4472f69a471e2b383e2a Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82177 Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-30mb/siemens/mc_ehl5: Remove DDI settings from devicetreeMario Scheithauer
Since this mainboard no longer uses the FSP GOP driver, the DDI port settings are no longer necessary. The GOP driver was used in the initial phase of development where we used Tianocore as payload for some test cases. Finally, this mainboard uses a self-made Linux payload, which does the graphic initialization. BUG=none TEST=Boot into Linux and check if graphic works correctly Change-Id: Ie9e135fbc2627546d6ef95d7d5ff3e9a9222b5d2 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82663 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-05-29mb/system76/rpl: Add Adder WS 4 as a variantTim Crawford
The Adder WS 4 (addw4) is a Raptor Lake-HX board. Tested with a custom edk2 UefiPayloadPkg. Working: - PS/2 keyboard - I2C HID touchpad - Both DIMM slots (with Crucial CT8G48C40S5) - M.2 NVMe SSDs - All USB ports - MicroSD card reader - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Backlight controls on Linux 6.8 - DisplayPort output over USB-C - Internal microphone - Internal speakers - Combined headset + mic 3.5mm audio - 3.5mm microphone input - S3 suspend/resume - Booting Pop!_OS Linux 22.04 with kernel 6.8.0 - TPM 2.0 device Not working: - Discrete/Hybrid graphics - Detection of devices in TBT slot on boot Change-Id: I4a6819cbcf64f68237008adebdd7eb196336514c Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82595 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-29mb/system76/rpl: Add Oryx Pro 12 as a variantTim Crawford
The Oryx Pro 12 (oryp12) is a Raptor Lake-HX board. Tested with a custom edk2 UefiPayloadPkg. Working: - PS/2 keyboard - I2C HID touchpad - Both DIMM slots (with Crucial CT8G48C40S5) - M.2 NVMe SSDs - MicroSD card reader - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Backlight controls on Linux 6.8 - Internal microphone - Internal speakers - Combined headset + mic 3.5mm audio - 3.5mm microphone input - S3 suspend/resume - Booting Pop!_OS Linux 22.04 with kernel 6.8.0 - TPM 2.0 device Not working: - Discrete/Hybrid graphics - Thunderbolt Change-Id: I11cf2dbd1512ebae44e0109bdb78e6eafa027444 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-05-29mb/system76/rpl: darp9: Add SSD RTD3 configsTim Crawford
Some drives block the CPU from reaching C10 during S0ix suspend without the RTD3 configs. Fixes suspend with the following drives: - Kingston KC3000 (SKC3000D/4096G) - Kingston HyperX (SHPM2280P2H/240G) - Solidigm P44 Pro (SSDPFKKW010X7) The following drives continue to work: - Samsung 970 Evo (MZVLB250HAHQ) - WD Black SN770 (WDS250G3X0E) - WD Green SN350 (WDS240G2G0C-00AJM0) - WD Blue SN570 (WDS100T3B0C) Change-Id: Ia369727d0f1aa5ff546cfb5700a63063730e8248 Signed-off-by: Tim Crawford <tcrawford@system76.com> Tested-by: Levi Portenier <levi@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2024-05-29mb/intel/mtlrvp: Enable EC MKBP deviceJay Patel
MKBP device is required for passing events from input sources to AP. Input sources include buttons (power, volume); switches (lid, tablet mode) and sysrq. BUG=b:342227155 TEST=Able to build coreboot for mtlrvp platform and switch tablet mode. Change-Id: I630421c83784bb4492486d72290b9e8cdada1d47 Signed-off-by: Jay Patel <jay2.patel@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82612 Reviewed-by: Vijay P Hiremath <vijay.p.hiremath@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
2024-05-29payloads/iPXE: Hook up TRUST_CMD switchMaciej Pijanowski
Change-Id: Ia4f5d4140eeb8625c5ee41e38f048658db28a199 Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79684 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-29cpu/x86/pae/pgtbl.c: extract reusable code from memset_pae()Krystian Hebel
Code dealing with PAE can be used outside of memset_pae(). This change extracts creation of identity mapped pagetables to init_pae_pagetables() and mapping of single 2 MiB map to pae_map_2M_page(). Both functions are exported in include/cpu/x86/pae.h to allow use outside of pgtbl.c. MEMSET_PAE_* macros were renamed to PAE_* since they no longer apply only to memset_pae(). Change-Id: I8aa80eb246ff0e77e1f51d71933d3d00ab75aaeb Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82249 Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-29mb/google/nissa/var/sundance: Add WWAN power off sequenceLeo Chou
Sundance support FM101 WWAN, use wwan_power.asl to handle the power off sequence BUG=b:343139385 TEST=Build and boot on sundance Change-Id: I82085172db370ab5a6c0f77afe6042c53b89e43e Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-29mb/google/nissa/var/pujjoga: Update touchscreen IC settingsRoger Wang
Modify the Goodix touchscreen from new vendor and remove 3 unused touchscreens. According to the information provided by the key-part team. BUG=b:340689681 TEST=Build and check Goodix touchscreen can work. Change-Id: I1e6349e80431aadf27cd72b8439b01f95348071d Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82427 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-29mb/google/nissa/var/sundance: Update eMMC DLL settingsRoger Wang
Currently Samsung eMMC (KLMBG2JETD-B041) can't power on to OS nomally. According to Intel provides eMMC DLL delay patch that tuning on each Sundance different eMMC system to modify some system can't boot to OS problem. BUG=b:342057438 TEST=Build and check each SKU eMMC can work. Change-Id: I29d4305bbe5f91d822d947cae942b654e80a8a57 Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82602 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-29tree: Remove unused <string.h>Elyes Haouas
Change-Id: I9ed1a82fcd3fc29124ddc406592bd45dc84d4628 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-05-29tree: Use <stdio.h> for snprintfElyes Haouas
<stdio.h> header is used for input/output operations (such as printf, scanf, fopen, etc.). Although some input/output functions can manipulate strings, they do not need to directly include <string.h> because they are declared independently. Change-Id: Ibe2a4ff6f68843a6d99cfdfe182cf2dd922802aa Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82665 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-29libpayload: Include libpayload-config.h in lib targetSubrata Banik
- Added `$(obj)/libpayload-config.h` as a dependency for the `lib` target. - This ensures the config header is up-to-date before building the library. TEST=Able to build google/rex. Change-Id: If26336f6261aadf611fa5338c4300873156cc3da Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-05-29util/nvidia: Use c11 dialectElyes Haouas
Change-Id: I75909ce85eed549d9094ba6f62d93656621d9f0d Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82679 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-29util/superiotool: Use c11 dialectElyes Haouas
Change-Id: Ic03d9ac883a92d52467d563f048446871b928712 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-05-29tree: Use Wcalloc-transposed-args command optionElyes Haouas
GCC-14 documentation says "The first argument to calloc is documented to be number of elements in array, while the second argument is size of each element, so calloc(n, sizeof (int)) is preferred over calloc(sizeof(int), n)." Change-Id: I77b6f4d2eda487b087ba5665b588999633c33e8d Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82658 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-29tree: Remove unused <stddef.h>Elyes Haouas
Change-Id: I7d7ad562eeff7247b7377b6570d489faee0aeda0 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82669 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-05-28mb/system76/tgl: Update VBTs to version 250Tim Crawford
Commit 4c7e97b26a34 ("Update fsp submodule to upstream master branch") included an update to the VBT from 240 to 250, breaking parsing of existing VBTs. After that commit, the VBT was parsed as (from gaze16-3060-b): [DEBUG] PCI: 00:02.0 init [INFO ] GMA: Found VBT in CBFS [INFO ] GMA: Found valid VBT in CBFS [INFO ] framebuffer_info: bytes_per_line: 4096, bits_per_pixel: 32 [INFO ] x_res x y_res: 1024 x 768, size: 3145728 at 0xd0000000 [DEBUG] PCI: 00:02.0 init finished in 6 msecs When the expected output is: [DEBUG] PCI: 00:00:02.0 init [INFO ] GMA: Found VBT in CBFS [INFO ] GMA: Found valid VBT in CBFS [INFO ] framebuffer_info: bytes_per_line: 7680, bits_per_pixel: 32 [INFO ] x_res x y_res: 1920 x 1080, size: 8294400 at 0xd0000000 [DEBUG] PCI: 00:00:02.0 init finished in 6 msecs Generate blobs for the new version using Intel Display Configuration Tool (DisCon) v3.3, based on the existing 237 and 240 VBTs. (For our edk2 payload, the UEFI GOP driver was updated to 17.0.1077.) Tested on all affected systems: - darp7 - galp5 - gaze16-3050 - gaze16-3060 - gaze16-3060-b - lemp10 - oryp8 Tested: - Boot splash displays on screen again - Firmware setup menu is rendered, at correct resolution Change-Id: I918356d9f660b985ee4408ef77544fbd071ab35f Signed-off-by: Tim Crawford <tcrawford@system76.com> Tested-by: Daniel Sutton <daniel@system76.com> Tested-by: Jacob Kauffmann <jacob@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82246 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-05-28mb/google/brox: Add romstage early graphicsSowmya Aralguppe
Select MAINBOARD_USE_EARLY_LIBGFXINIT for brox to enable SOL image. This patch enables Sign of Life image during MRC training. BUG=b:335369811 TEST=Able to boot to ChromeOS with SOL image. CPU log: [SPEW ] bootmode is set to: 0 (boot with full config) [0.384818] DP PHY mode status not complete [0.388911] DP PHY mode status not complete [0.393197] DP PHY mode status not complete [0.397484] DP PHY mode status not complete [0.401771] DP PHY mode status not complete [0.406057] DP PHY mode status not complete [0.410345] DP PHY mode status not complete [0.414632] DP PHY mode status not complete [0.418916] DP PHY mode status not complete [0.423203] DP PHY mode status not complete [0.427491] DP PHY mode status not complete [0.431777] DP PHY mode status not complete [INFO ] Informing user on-display of memory training. [DEBUG] FMAP: area COREBOOT found @ 1877000 (7901184 bytes) [WARN ] CBFS: 'preram_locales' not found. [ERROR] ux_locales_get_text: preram_locales not found. [DEBUG] FMAP: area RW_ELOG found @ f20000 (16384 bytes) [INFO ] ELOG: NV offset 0xf20000 size 0x4000  elogtool list: 0 | 2024-05-10 02:26:07-0700 | Log area cleared | 4088 1 | 2024-05-10 02:26:07-0700 | Early Sign of Life | MRC Early SOL Screen Shown 2 | 2024-05-10 02:26:51-0700 | Memory Cache Update | Normal | Success 3 | 2024-05-10 02:27:09-0700 | System boot | 4 4 | 2024-05-10 02:27:09-0700 | Firmware Splash Screen | Enabled 5 | 2024-05-10 02:27:11-0700 | System Reset 6 | 2024-05-10 02:27:11-0700 | Firmware vboot info | boot_mode=Developer | fw_tried=A | fw_try_count=0 | fw_prev_tried=A | fw_prev_result=Unknown 7 | 2024-05-10 02:27:18-0700 | ACPI Enter | S5 8 | 2024-05-10 02:27:36-0700 | System boot | 5 9 | 2024-05-10 02:27:36-0700 | Firmware Splash Screen | Enabled 10 | 2024-05-10 02:27:37-0700 | System Reset 11 | 2024-05-10 02:27:37-0700 | Firmware vboot info | boot_mode=Developer | fw_tried=A | fw_try_count=0 | fw_prev_tried=A | fw_prev_result=Unknown Change-Id: I1d4795825960bc58f8f7ef494b01aa975f3bc346 Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
2024-05-28tree: Add smbios_processor_typeElyes Haouas
Change-Id: I46f799ad255993ac42dab11b5c1d2608daa52b42 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82645 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-28mb/google/trulo: Add initial devicetree.cbSubrata Banik
This patch adds initial PCI device entries into the baseboard devicetree.cb. TEST=Able to build google/trulo. Change-Id: I6ec25b98379cf7c8cbdb5be94d9f3ea43878620c Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82652 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-28mb/google/trulo: Mark unused USB ports as emptySubrata Banik
This patch marks unused USB ports (USB2.0/TCSS) empty to avoid prompting wrong dmesg as below. ``` usb usb2-port3: Cannot enable. Maybe the USB cable is bad? ``` Trulo variants to override the USB ports as per the target board design. TEST=Able to build google/trulo. Change-Id: I6240e66ed3d1a7198c1a526fdca2483910157235 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-28mb/google/trulo: Program EC ranges (host cmd and memory map)Subrata Banik
This patch adds chip config entries for EC host cmd and memory map ranges. TEST=Able to build Google/Trulo. Change-Id: Id4b0f3bba934c8da56b6d7ca8579b46b6cccac28 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-28soc/intel/xeon_sp: Add PD_TYPE_CLUSTERShuo Liu
Add a new proximity type to represent the sub-NUMA cluster (SNC). This patch adds necessary Xeon-SP common code level support for SNC support. When SNC on, each SNC cluster will have a proximity domain. DIMMs and CPU cores are attached to SNC proximity domains instead of the processor proximity domains. With SNC, there are 3 types of proximity domains, PD_TYPE_PROCESSOR, PD_TYPE_GENERIC_INITIATOR and PD_TYPE_CLUSTER. proximity domain type checks in Xeon-SP codes are updated to correctly handle the adding of the new type. This patch doesn't actually enable SNC. To fully enable SNC, SoC codes need to override soc_get_cluster_count(), soc_set_cpu_node_ id() and memory_to_pd(), and call soc_set_cpu_node_id() in its per-CPU init routine. Change-Id: I32558983780f302ff4893901540a90baebf47add Signed-off-by: Shuo Liu <shuo.liu@intel.com> Co-authored-by: Ziang Wang <ziang.wang@intel.com> Co-authored-by: Gang Chen <gang.c.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81443 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-05-28include/device: Fix IO resource handling covering 0xFFFFShuo Liu
IO resource creation utils taking 'from' and 'to' as parameters use uint16_t for them, where 'to' equals the resource limit plus 1. When a resource is with a limit of 0xFFFF, the value of 'to' will be clipped to 0x0000 by uint16_t. Fix this problem by use uint32_t and checks the effective range to make sure it no larger than UINT16_MAX + 1. TEST=Build and boot on intel/archercity CRB TEST=Build on intel/avenuecity CRB Change-Id: Ie83045683094d6330c1676809f83acf30175cc90 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82192 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2024-05-28soc/intel/xeon_sp: Add domain resource window creation utilsShuo Liu
It might be benefical to have utils for domain resource window creation so that the correct IORESOURCE flags used could be guaranteed. TEST=Build and boot on intel/archercity CRB TEST=Build on intel/avenuecity CRB Change-Id: I1e90512a48ab002a1c1d5031585ddadaac63673e Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2024-05-28tree: Remove unused <stdarg.h>Elyes Haouas
<stdarg.h> header is used to define macros for handling variable argument lists in functions like printf. It does not depend on the string or memory manipulation functions provided by <string.h>. So let follow conventions and include only the necessary headers in each header file. Change-Id: I07ffc65b7feefb8ec4ab8dd268113f9ed8d24685 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82664 Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-28spd_bin.h: Use same macro for DDR3 and LPDDR3Elyes Haouas
DDR3 and LPDDR3 share the same PART_NUM and PART_LEN. So use the same macro. This is to prepare SPD de-duplication in following patch. Change-Id: Iea824a847b5072b1cbaa38dc38deae1d484d5b16 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-28soc/mediatek/mt8188: Decrease OP-TEE image size from 80 MB to 70 MBGavin Liu
The secure buffer shrank from 42 MB to 32 MB, decreasing the total OP-TEE image size from 80 MB to 70 MB. BUG=b:246837563 TEST=emerge-geralt coreboot build coreboot and verify SVP works well Change-Id: I6729e65f83ef994fe59b5bd4ed098e6d3a847695 Signed-off-by: Gavin Liu <gavin.liu@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-05-27acpi/acpi_apic;arch/x86/acpi: better document ACPI_NO_PCAT_8259 caseFelix Held
Both acpi_create_madt_sci_override and acpi_sci_int have special handling for the ACPI_NO_PCAT_8259 case, but those cases weren't exactly obvious, so add a comment with the reason for that. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia6dcf59d5ab9226c61e9c4af95a73a07771b71d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82643 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-27mb/aoostar: Add Alder Lake based AOOSTAR R1 (WTR_R1)Federico Amedeo Izzo
AOOSTAR R1 is a Chinese NAS based on Intel N100 (Alder Lake N), with two 3.5" HDD slots, an M.2 NVMe 2280 SSD slot and a single DDR4-3200 SODIMM slot up to 32GB. It also comes with 2x 2.5Gb Intel NICs, Intel AX200 WiFi + BT and USB-C Alt-DP Power Delivery. Working: - DDR4 RAM (tested with Crucial 16GB 3200MHz CL22) - Automatic FAN control (IT8613E Super I/O) - M.2 NVME slot - 2x SATA ports (Issue on 3.5" HDD, see below) - USB 2.0 ports - USB 3.0 ports - USB-C port with Alt-DP and PD - HDMI / DisplayPort ports - 2x 2.5Gb NICs - WiFi + BT - MicroSD card reader - ASPM (Unavailable on stock) - Linux (Arch Linux, kernel 6.8.7-arch1-1) UEFI booting with EDK2 - Windows 10 UEFI booting with EDK2 Broken: - Power button (OFF->ON broken, ON->OFF works) - 3.5" SATA HDDs (Detected only after reboot) Untested: - Internal audio - S3 My motivation for doing this port is enabling ASPM, as it makes a great difference on idle power consumption (from 8.4W to 5W measured from the wall). The last remaining annoyance of this port is the power button not working. I spent a few hours double checking the Super I/O registers but then I gave up. A workaround for this is to use the "ON after power loss" feature and reconnect the power cord to turn on the board. It's not a big problem for a NAS that will stay ON 24/7. Any hint on the power button or 3.5" HDD issue is welcome. VBT extracted from vendor UEFI firmware version 1AXFE 0.01 x64 (Build date and time 11/29/2023 10:57:44) Compiled with FSP GOP video initialization, using IFD descriptor and ME blob extracted from vendor UEFI firmware (see above). The board can be flashed externally using a 1.8V adapter, I used a CH341a modded for 3.3V I/O. Internal flashing works, as flash is not read/write protected. Patchset 5: Re-enabled dptf, added default options to Kconfig. Patchset 7: Configured USB port mapping and overcurrent, USB3.0 works Patchset 8: Fixed microSD card reader Patchset 13: Change Super I/O Fan configuration to reduce fan noise Change-Id: I9414eb742b6b90459e010b038c1994537e9801a5 Signed-off-by: Federico Amedeo Izzo <federico@izzo.pro> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82010 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-27mb/google/ovis/var/deku: Set PsysPL2 value to 178WTony Huang
Adjust setting as recommended by power team. Add ramstage.c in Makefile.inc to set psys_pl2_watts in variant_devtree_update(). Also copy CPU power limit values from ovis baseboard. BUG=b:320410462 BRANCH=firmware-rex-15709.B TEST=FSP debug emerge-ovis coreboot intelfsp check overrides setting [INFO] CPU PsysPL2 = 178 Watts [INFO] Overriding PsysPL2 (178) [INFO] Overriding power limits PL1 (mW) (19000,28000) PL2 (mW) (64000, 64000) PL4 (W) (120) Change-Id: I9ce3a8f843a87e81d404778aaf250b876b6801eb Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82200 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Derek Huang <derekhuang@google.com>
2024-05-27mb/google/ovis/var/deku: Increase TDP PL1 value from 28 W to 33 WTony Huang
Adjust settings as recommended by thermal team. Set PL1 max value tdp_pl1_override from 28W to 33W. PL2, PL4 remain the same as CPU default. BUG=b:308704811 BRANCH=firmware-rex-15709.B TEST=emerge-ovis coreboot chromeos-bootimage built bootleg and verified test result by thermal team Change-Id: Iad0bca913496dda666ba9bcfe5f6fce1a6396692 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82615 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-27mb/google/ovis/var/deku: Set TCC_offset to 5Tony Huang
Adjust settings as recommended by thermal team. Set tcc_offset value to 5 in devicetree. BUG=b:308704811 BRANCH=firmware-rex-15709.B TEST=emerge-ovis coreboot chromeos-bootimage built bootleg and verified test result by thermal team Change-Id: I30f54ae6017c54c91ff9b432bba0ebd5bfc65ab9 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82614 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-27mb/google/rex/var/deku: Update DPTF parametersTony Huang
Adjust settings as recommended by thermal team. Update DPTF parameters based on b:308704811#comment4. BUG=b:308704811 BRANCH=firmware-rex-15709.B TEST=emerge-ovis coreboot chromeos-bootimage built bootleg and verified test result by thermal team Change-Id: I710682771bd0679ae4b44dd43be68f60e8984b2e Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-27security/memory_clear: fix wrong size of reserved memory rangeKrystian Hebel
The code used to reserve MEMSET_PAE_PGTL_SIZE (20 KiB) for page used for clearing the memory above 4 GiB that was assumed to be 2 MiB page. memset_pae() checks only the alignment and not the size of this region, so no error was reported by it. In most cases this reserved memory in 2-4 MiB range, and because this range isn't usually used by coreboot (architectural stuff is located in lower 1 MiB, coreboot tables and ramstage are close to TOLUM and payload isn't yet loaded when the broken code is executed), it never caused any problems. Change MEMSET_PAE_PGTL_SIZE to MEMSET_PAE_VMEM_SIZE and fix wrong macro definition to reserve properly sized region. Change-Id: I0df15b0d1767196fe70be14d94428ccdf8dbd5d3 Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82397 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2024-05-27acpi/acpi_apic: use generic MADT IRQ override function for SCI overrideFelix Held
Call acpi_create_madt_irqoverride from acpi_create_madt_sci_override with the correct parameters instead or re-implementing the same functionality. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7e6ee0eed837c2d46da62092b7cc5669dc177d8d Reviewed-on: https://review.coreboot.org/c/coreboot/+/82644 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2024-05-27lint-stable-003-whitespace: Exclude DTB filesMaximilian Brune
This excludes Devicetree blob files from the list of files to check for superfluous whitespaces. A DTB file has recently been added in commit 33079b8174 ("lib/device_tree: Add some FDT helper functions"). Change-Id: Ic25ee5361163446370c530cccefa3bf085895d15 Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82638 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Shuo Liu <shuo.liu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-26Makefile: Warn if flexible array members are not at the endElyes Haouas
Change-Id: Ib704f7659d3b431ce7eebb4432c5b1a4272de3d2 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77147 Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-26libpayload: Add x86_64 (64-bit) supportSubrata Banik
This patch introduces x86_64 (64-bit) support to the payload, building upon the existing x86 (32-bit) architecture. Files necessary for 64-bit compilation are now guarded by the `CONFIG_LP_ARCH_X86_64` Kconfig option. BUG=b:242829490 TEST=Able to verify all valid combinations between coreboot and payload with this patch. Payload Entry Point Behavior with below code. +----------------+--------------------+----------------------------+ | LP_ARCH_X86_64 | Payload Entry Mode | Description | +----------------+--------------------+----------------------------+ | No | 32-bit | Direct protected mode init | +----------------+--------------------+----------------------------+ | Yes | 32-bit | Protected to long mode | +----------------+--------------------+----------------------------+ | Yes | 64-bit | Long mode initialization | +----------------+--------------------+----------------------------+ Change-Id: I69fda47bedf1a14807b1515c4aed6e3a1d5b8585 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81968 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-25acpi: add and use defines for LAPIC feature flagsFelix Held
Both the processor local APIC structure and the processor local x2APIC structure use the same flag bit definitions. ACPI spec 6.4 was used as a reference. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8101c2ea874c8b12b130dbe9a0a7e0f0d94adffa Reviewed-on: https://review.coreboot.org/c/coreboot/+/82641 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2024-05-25acpi: introduce and use ACPI_MADT_PCAT_COMPAT defineFelix Held
The multiple APIC flags table from the ACPI specification version 6.4 was used as a reference. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I36f67ca21465bc8753bb36896ee05669de6de333 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82640 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-25arch/arm64: Implement initial set of SMBIOS tablesBenjamin Doron
Implement the two architectural tables: processor and cache. Note that SoC/board code should override core-thread count and, for spec-compliance, create CBMEM_ID_MEMINFO. Change-Id: Iedae0f26f168bd6d3af866e35d9d39ddb01abc15 Signed-off-by: Benjamin Doron <benjamin.doron@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78285 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2024-05-25arch/arm64: Support calling a trusted monitorBenjamin Doron
Implement support for generating an SMC to call a trusted monitor. Some functions are provided to read the SoC ID from the monitor, if supported. Change-Id: I158db0b971aba722b3995d52162146aa406d1644 Signed-off-by: Benjamin Doron <benjamin.doron@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78284 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-24soc/intel/xeon_sp: Move get_cxl_mode out of soc/util.hShuo Liu
get_cxl_mode() is the interface for CXL mode config check used by SoC codes. It could be implemented by mechanisms outside of the SoC codes, e.g. board codes or OCP VPD driver. Move the interface declaration out of soc/util.h to a dedicated header, a.k.a., soc/config.h, so that the implementation codes do not need to include soc/util.h where there are lots of irrelevant definitions. Future SoC config check interfaces could be added to soc/config.h as well. The default weak implementation is moved out of util.c to config.c as well. TEST=Build and boot on intel/archercity CRB Change-Id: Ia0302b0d3fd93c49e1d6f64e8159f59d50f33e20 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82293 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-24device/pci_rom: handle non-remapped VGA_BIOS_IDFelix Held
While the SoC-level defaults for VGA_BIOS_ID are the expected correctly remapped PCI VID/PID of the GPU which matches the PCI VID/DID inside the VBIOS file, some mainboards override the VGA_BIOS_ID setting to the non-remapped PCI ID. This resulted in coreboot not finding the VBIOS file after commit 42f0396a1028 ("device/pci_rom: rework PCI ID remapping in pci_rom_probe"). The proper solution would be to not override this SoC-level config in neither the mainboard code nor some external config file. This however requires adding/using some mechanism to tell SeaBIOS which VBIOS image to use for the GPU device. Once this is implemented, the SoC default for VGA_BIOS_ID shouldn't be overridden any more and this patch can be reverted again. This sort-of reverts parts of commit 42f0396a1028 ("device/pci_rom: rework PCI ID remapping in pci_rom_probe"), but it still tries to find the VBIOS image with the expected remapped PCI ID and only adds trying the non-remapped PCI ID as a fallback when the file with the remapped PCI ID doesn't exist and prints a notice in that case. Before the patch referenced above, using the correct remapped PCI VID/DID resulted in a warning about the CBFS file with the non-remapped name not being found, but first checking the remapped version solves that problem. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7cd8e2036250f4ca2239b04cd070bbf0778b13aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/82592 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2024-05-24AUTHORS: Remove whitespaces at end of lineElyes Haouas
Change-Id: I8445ac2e1bfca6cbf9d4d544318eec666948a8c4 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2024-05-24AUTHORS: Update with 24.05 release infoMartin Roth
This adds the Authors from the 24.02 tag to the 24.05 tag. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Icb53c62c9a122ccdf2548cc2eebc8b0316a844ef Reviewed-on: https://review.coreboot.org/c/coreboot/+/82617 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-24Update 24.05 release notes with final statisticsMartin Roth
The pre-release notes never capture everything, so we need to do an update to finalize them after the release is tagged. This captures on additional SoC added right before the release and updates the statistics. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Id3efcd15597e4fee0bdbca76e474974ae32d3263 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82613 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-24libpayload: Inject head.S into libc, remove separate classSubrata Banik
Integrate head.S directly into libc and remove all instances of head.o. * Drop 'separate class' entry for head.S. * Drop special treament for head.o inside lpgcc. * Change the .text in `x86/head.S` to `.section .text._entry`. * Drop arch/mock/head.c, initially added as a dummy file. Change-Id: I156d781908fcc38d455bbf9f2c29e5ab95c7775a Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2024-05-24libpayload: x86: Move Multiboot header to include fileSubrata Banik
This moves the multiboot header into its own include file, simplifying head.S and making it easier to include/exclude the multiboot header based on config options. BUG=b:242829490 TEST=Able to build and boot google/rex. Change-Id: I59a22dfe36044b4dd64a5b028a134be7a7d02a48 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82533 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-24mb/google/trulo: Refactor gpio pad configurationSubrata Banik
This patch tries to simplify the baseboard/variant GPIO programming for Google/Trulo. The idea is to let each variant maintain its own complete GPIO PAD configuration table instead of having a back-and-forth call between baseboard and variants. With this patch coreboot performing GPIO programming is now much simpler where the common code block calls into respective variants and gets the gpio table prior to the pad configuration. BUG=b:334826281 ([TWL] Decouple GPIO from baseboard to variant) TEST=Able to build google/orisa. Change-Id: I4ab88ac094a45c608cd894feb5eeec24b867527a Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-05-24mb/google/nissa: Fix potential null pointer dereferenceSubrata Banik
* Introduce a null check before calling `gpio_padbased_override` in `variant_configure_pads`. * This prevents potential errors in cases where the `variant_gpio_override_table` function returns a null pointer, indicating that there are no override pads to configure. BUG=b:334826281 TEST=Able to avoid hang incase there is no GPIO override. Change-Id: I733210a08091b37eda6e6b0d6924aafd5e7e6280 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82628 Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-23device: drop unnecessary CHECK_REV_IN_OPROM_NAME optionFelix Held
The CHECK_REV_IN_OPROM_NAME Kconfig option was introduced to solve the problem of the PCI VID/DID combination of the Picasso iGPU not being sufficient information to know which VGA BIOS file to run, so a new function that additionally checks the PCI revision of that device was introduced. Later it turned out that there might be a case where even that isn't sufficient, so the soc_is_raven2() function is used in the remap function to always use the correct VBIOS file. Picasso is the only SoC that selected the CHECK_REV_IN_OPROM_NAME Kconfig option, so all other SoCs are unaffected by this change. Now that we use the VBIOS images with only the PCI VID and DID in the CBFS file name for Picasso, SeaBIOS will find the VBIOS with the same ID as the iGPU in CBFS and we don't need the workaround to add a third VBIOS image via VGA_BIOS_DGPU_* that has the name that SeaBIOS expects. This will result in SeaBIOS now running the VBIOS that has the same PCI VID/DID as the hardware which will be the wrong one in the RV2 silicon showing the PCO silicon PCI VID/DID, but that was also the case with the VGA_BIOS_DGPU_* workaround where the board's Kconfig just selected one of the two possible images during build time and hoped that it was the correct one for that actual hardware. The only board where this patch might cause a regression compared to the old behavior is the AMD Cereme reference board with Pollock APU, but I'm not even sure if any coreboot developer still has one of those boards, so I'm willing to accept that. To properly solve the problem with SeaBIOS using the correct VBIOS file in all cases, we'd need to generate that info during coreboot runtime and somehow pass it to SeaBIOS, but that's out of scope for this patch. TEST=On Mandolin with PCO silicon, the display output in both SeaBIOS and Ubuntu still works. Booting Windows 10 via the pre-built EDK2 payload that I'm using also resulted in the display output working. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia6de533c536044698d85404427719b8f534870fa Reviewed-on: https://review.coreboot.org/c/coreboot/+/82598 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-23soc/intel/xeon_sp/gnr/soc_iio: Remove unused <string.h>Elyes Haouas
Change-Id: I8d4500edaa0739921831a3b04131046599c35a87 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82618 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Shuo Liu <shuo.liu@intel.com>
2024-05-23mb/google/brox/var/brox: Remove mux references from typec portPrashant Malani
The Type-C kernel driver no longer programs the AP mux, as of https://review.coreboot.org/c/coreboot/+/82077. So remove device references to the TCSS Mux control device from the Type-C port driver. This eliminates the following kernel error which was observed as a result of the kernel trying to program muxes it no longer has control over: [ 4.618600] cros-ec-typec GOOG0014:00: Failed to get mux info for port: 0, err = -95 [ 4.618608] cros-ec-typec GOOG0014:00: Configure muxes failed, err = -95 BUG=b:341331428 TEST=Run system reboot; configure mux kernel errors no longer seen. Change-Id: I93e498b12b109c0e649a23a4a49868976a9ee06b Signed-off-by: Prashant Malani <pmalani@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82599 Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-23mb/amd/birman/display_card_type.h: add missing includeFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5208ceeec17051e7849263a4caa0838efd59c044 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82608 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2024-05-23mb/amd/birman/display_card_type.h: add missing include guardsFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iaf4478814e672fb8cfae5ffc4fa89c475f5bb0b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82607 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-23soc/amd/phoenix/chip_opensil.h: add missing include guardsFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iba17d44772333ed59e3fdde1443a1862bae8e32f Reviewed-on: https://review.coreboot.org/c/coreboot/+/82606 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2024-05-23mb/google/brya: Add romstage early graphics for nissaRonak Kanabar
1) Add all changes needed for early graphics 2) select MAINBOARD_USE_EARLY_LIBGFXINIT for nissa The InnoLux (N156HCN-EBA C7) panel is used for the device tree. BUG=b:296433986 TEST=On-screen text message seen during MRC training on Craask Logs: [NOTE ] MRC: no data in 'RW_MRC_CACHE' [SPEW ] bootmode is set to: 0 [0.171409] DP PHY mode status not complete [0.175509] DP PHY mode status not complete [0.179799] DP PHY mode status not complete [0.184087] DP PHY mode status not complete [0.188376] DP PHY mode status not complete [0.192665] DP PHY mode status not complete [0.196954] DP PHY mode status not complete [0.201243] DP PHY mode status not complete [0.205532] DP PHY mode status not complete [0.209821] DP PHY mode status not complete [0.214110] DP PHY mode status not complete [0.218397] DP PHY mode status not complete [INFO ] Informing user on-display of memory training. Change-Id: I33cfc5d1f8c25c344e598befd21c50a78a65275a Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78932 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-23mb/cwwk: Add CWWK CW-ADL-4L-V1.0 boardBrandon Weeks
This board is the CWWK variant based upon Alder Lake with 4 2.5 GbE ports, similar boards are available in other port configurations. As a low cost, relatively high performance board with 4 NICs, it is well suited for networking or 'homelab' tasks. CPU: Intel N100 or N350 Memory: DDR5-4800 SODIMM (max 16 GB) NIC: 4x Intel I226-V 2.5 GbE Expansion: - M.2 2230 E key - M.2 2280 M key - USB 2.0 header - Fan header External ports: - DC power - 4x Ethernet - Display Port - HDMI - 4x USB 2.0 - Micro SD Working: - Boots Debian 12 with SeaBIOS and EDK II payloads - Serial port - External USB ports - DisplayPort / HDMI - 4x Intel I226 2.5 GbE NICs - M.2 ports - Micro SD slot - ACPI S3 Not working / not tested: - Fan (ITE IT8613E) - Audio - S0ix - Internal USB ports VBT extracted from vendor UEFI firmware version ADLN 0.01 x64 (04/04/2023 11:42:38). Change-Id: Ice9174d95c10afc6a22ddd15fb3be4fa38d329be Signed-off-by: Brandon Weeks <me@brandonweeks.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-05-23cpu/intel/model_206ax: Program Ivy Bridge defaults for MSR_PKGC_IRTLPatrick Rudolph
Ivy Bridge has lower latencies than Sandy Bridge has. Update MSRs MSR_PKGC_IRTL with values from BWG. Test: Lenovo X220 still boots. Change-Id: Ib307e3b191ba68e016cc348f82e2dccf1dc9ae16 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78609 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2024-05-23soc/intel/xeon_sp: Dump proximity domain info per typesShuo Liu
Some proximity domain info are type specifics, e.g. base/size/dev are effective for PD_TYPE_GENERIC_INITIATOR, but not for PD_TYPE_PROCESSOR. Dump info per their type. TEST=Build and boot on intel/archercity Change-Id: I7e722a0577bba954efba3e91cc152c758c001d68 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2024-05-23soc/intel/xeon_sp: Move proximity domain setting upShuo Liu
Move proximity domain setting up to ahead of attach_iio_stacks() so that proximity domain info could be ready before attach_iio_stacks()/create_xeonsp_domains(). For example in SPR, is_iio_cxl_stack_res() refers to proximity domain info, and it will be called in create_xeonsp_domains(). TEST=Build and boot on intel/archercity No significant boot log difference except for proximity domain dump info display are moved ahead (with correct contents). Change-Id: I594f0ec0c23e3b62c3bdd917ebf6e45be6e4069e Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82267 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-23mb/google/nissa/var/orisa: Generate RAM ID for Micron MT62F512M32D2DR-031 WT:BAmanda Huang
Add Micron part MT62F512M32D2DR-031 WT:B only for Orisa. DRAM Part Name ID to assign MT62F512M32D2DR-031 WT:B 0 (0000) BUG=b:337178014 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: I559ed817250c40795e6c613794d4f65c636f5fc5 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82586 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-22Revert "mb/google/rex/var/deku: Configure GPIO"Tony Huang
This reverts commit 7088257b1ab715e93506619727e3bf589ea688fb. Reason for revert: Intel suggest is NC only. No need to change anything that isn't broken. Change-Id: I976a85b35c69b03f1bc0ccd2bc7df923e47be815 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82572 Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-22mb/prodrive/hermes: Tidy up hda_verb.cAngel Pons
Use the `AZALIA_PIN_CFG_NC(0)` macro instead of `0x411111f0` and tidy up some comments (align them and be consistent with capitalisation). Tested with BUILD_TIMELESS=1, prodrive/hermes remains identical. Change-Id: I1ff1197b1309fc0e5b978d6d36867a3f1a68c67c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82396 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2024-05-22mb/amd/birman/devicetree_phoenix_opensil: add USB PHY configFelix Held
Now that we also have the devicetree registers for the USB PHY config in the openSIL case, add the USB PHY config setting from the Phoenix with FSP devicetree. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3a0acbf1b9d705dbf09f4480eb35e71e587ddd44 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2024-05-22soc/amd/phoenix/chip.h: add USB PHY configuration for openSILFelix Held
Add the USB PHY configuration structs for the openSIL case, so that those can be configured in the devicetree like in the FSP case. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ied25e90859c4b1bc9b876bed3f3c46358ca36d32 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82584 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-22mb/amd/birman/update_devicetree_phoenix_opensil: update DDI1 configFelix Held
Use the now common get_ddi1_type function to update the connector type of the DDI1 port to match the display output extension card plugged into the reference board. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7c51eab0d32e0a1708da415f690689a8ec38dcd3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82583 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-22mb/amd/birman: factor out get_ddi1_typeFelix Held
Both port descriptor files used in the FSP case contain an identical get_ddi1_type implementation, so factor it out into a separate file. This will also allow using the same function in the openSIL case in a following patch. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6f5b75b9bdbdc67901d157079785c8fa2915bf0c Reviewed-on: https://review.coreboot.org/c/coreboot/+/82582 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-22mb/amd/birman/devicetree_phoenix_opensil: add static DDI configurationFelix Held
Add a static DDI port configuration to the devicetree used in the Phoenix with openSIL case. The configuration is taken from the birman_ddi_descriptors array in port_descriptor_phoenix.c. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7b85b04114591f3e9da183019c98ca2cb08e59da Reviewed-on: https://review.coreboot.org/c/coreboot/+/82581 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-22soc/amd/phoenix/chip.h: add DDI configuration for openSILFelix Held
In the FSP case, the DDI descriptors aren't part of the devicetree and are instead retrieved in romstage by calling the mainboard's mainboard_get_dxio_ddi_descriptors function which allows updating the descriptors during romstage where the devicetree is static. In the openSIL case, the DDI configuration is first needed in ramstage, so we can put this info into the devicetree and update it if needed in ramstage. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3de12ff6af42e38751a3016efa313613677fa87a Reviewed-on: https://review.coreboot.org/c/coreboot/+/82580 Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2024-05-22mb/amd/birman/devicetree_phoenix_opensil: remove unexpected '<'Felix Held
Remove the unexpected '<' char at the end of the comment about the PSPP policy config. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id821351ce3a7a2b7844d8e7478fa3de3227a7da9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82579 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
2024-05-22soc/amd/phoenix/chipset_*.cb: remove TODOFelix Held
Remove the TODO to update the chipset devicetree for Phoenix, since this has already been done. When re-checking the chipset devicetree, I found conflicting information about the existence of the PCI bridge to an external PCIe port on bus 0 device 1 function 5, but after looking into this, I'm reasonably certain that it either doesn't exist or at least wouldn't be usable, so I won't add that one to the chipset devicetree. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8f0e1540ed45408e86186253d3982a7ba0065ac6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
2024-05-22mb/intel/archercity_crb: Fix build for specific configurationsPatrick Rudolph
Guard OCP functions calls to allow builds without OCP drivers. Change-Id: Ie9a82387366a8bb3387bcba3ec7a4c7f0100f78c Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-05-22mb/intel/mtlrvp: Include fw_config.c fileAnil Kumar
Update Makefile to include fw_config file for mtlrvp board. Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: Id41cd8b015a796f7a959ceccf85106a48d15ae35 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82559 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-22Revert "mb/google/brox: Update verb table to fix headset detection"Terry Cheong
This reverts commit f867c9c5473156617691d78350c362cd993bfcdd. The new verb table breaks external mic detection on brox. Revert and use old verb tables instead. BUG=b:330433089 BRANCH=main TEST=Verified headset on Brox When connected to audiojack in power_save state of legacy hda driver, headset is detected and audio is resumed. Change-Id: I0d8c092de6166b2c62f5ecc3deaf4960128e6106 Signed-off-by: Terry Cheong <htcheong@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82273 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-21mb/google/brya/var/nova: Add SOLDERDOWN supportKenneth Chan
Nova will use SOLDERDOWN. Add memory.c to override baseboard. Update dram id table for correct platform parameter. BUG=b:328711879 Change-Id: I6fbce991ef5ab9f0e6216ad1a5af73fcc1996a2a Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82474 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 01:31:37 +0000